2. Inside Front and Back Cover - Cut 2 pieces of fabric 9 3/4 " x 12" and 2 pieces of same size of interfacing.

Fabric & Notions Required - Small Complete OR Small Split Version

* .9m (1yd) of 150cm (60") OR 1.15m (1.25yd) of 115m (45") medium weight cotton* 1.8m (2yd) of purchased piping or lip cord* Lightweight tear-away stabilizer(backing)* 1.8m (2yds) of 55cm (22") lightweight fusible interfacing

Fabric Preparation

1. Outside Cover - Cut 1 piece of fabric 20" x 12" and 1 of same size piece of interfacing.

The second version (Small Split) includes 2 or more embroidery designs for each page. In order to sew eachpage you will need a hoop no smaller than 12.5cm x 11cm = 5" x 4.25". The instructions below includemeasurements and explanation on how to re-hoop each page for each part of each page. The embroidery designs Ch305 - Ch346 can be purchased as a pack and downloaded from your downloadcenter as a Zip file (.exe) that will self-extract to a folder on your C drive.

Supplies Required

* Sewing machine with Embroidery Capabilities* Embroidery Foot* Standard Foot* Piping Foot* Zipper Foot* 1/4" Seam Foot* Embroidery Thread* Bobbin Thread

Embroidery Designs and Hoops Required

Small Complete Version

* Embroidery Hoop - 20cm x 14cm = 8" x 5.5"* Stitchitize Design Pack - 'Twas the Night Before Christmas **Small Complete**

Small Split Version

* Embroidery Hoop (small split version) 12.5cm x 11cm = 5" x 4.25"* Stitchitize Design Pack - "Twas the Night Before Christmas **Small Split**

Book Embroidery

Small Complete Version** For use with an Embroidery Hoop no smaller than - 20cm x 14cm 8" x 5.5"

1. Download the Stitchitize Design Pack - 'Twas the Night Before Christmas **Small Complete**Design#'s Ch292-Ch304 (14 files)2.Transfer designs to your machine.3. Hoop the front/back cover piece of fused fabric.4. Slide a piece of lightweight tear-away stabilizer under the hooped fabric. Be sure that the piece oftear-away is larger than the area to be sewn.5. Sew embroidery design following html printable sewing sequence page found in your "Download Center".6. Repeat steps 3-4-5 for all remaining designs in pack.

Small Split Version** For use with an Embroidery Hoop no smaller than - 12.5cm x 11cm = 5" x 4.25"NOTE: All of the pages in this version have been split into 2 or 3 designs to fit in the smaller hoop andwill require muti-hooping..

1. Download the Stitchitize Design Pack - 'Twas the Night Before Christmas **Small Split**Design#'s Ch306-Ch346 (41 files)2.Transfer designs to your machine.3. Using the previously marked center of each page follow these measurements to mark the centerof each design of each page.

3. Inside Pages - Cut 10 pieces of fabric 9 1/4 " x 11" and 10 pieces of same size of interfacing.

4. Apply interfacing to wrong side of fabric pieces using medium heat setting on iron.5. Mark a dotted line 3/4" from book binding (inside edge) side of all 10 pages and 2 inside cover pages.Be sure that the line is on the book binding side of each page.This line is marked to help find the center ofthe page for embroidery. As the binding will be hidden, it is important that the area not be included whenmeasuring for page center.6. Mark the 2" binding area in the center of the Front/Back cover.7. Mark the center of each page.When finding the center of each page for embroidery, be sure not to includethe marked book binding area.

TIP - When hooping pages for embroidery, odd #'d pages and the back inside cover will have the markedbinding area on the left. Even #'d pages and the front inside page will have the marked binding on the right.

Book Construction 1. All seam allowances are 1⁄2 inch.2. Set up the MC10001 for regular sewing.3. Attach Zipper Foot.4.Thread the needle and bobbin with all-purpose thread.5. Starting 1" from the end of the piping/cord and with right sides together, pin piping around outer edge ofbook cover. Ease extra piping into corners. Sew completely around outside cover stitching as close to pipingas possible.When you return to the start, overlap piping on a slight diagonal to form a "V" and stitch throughboth layers of piping.This makes a smooth overlapping join.Trim off excess piping.6.With right sides together, sew the inside front page to the outside cover on three outer sides, sewing onprevious stitching line.7. Clip corners, trim seam allowances to 1/4", turn fabric right side out, push out corners from the inside withtool and press outside edge.8. Repeat steps 6 and 7 to complete the inside back cover.9. Attach standard foot.10. Pair up embroidered inside pages - 1 and 2, 3 and 4, 5 and 6, 7 and 8, 9 and 10.11.With right sides together, sew along three sides of each set of pages, leaving book binding side open.12. Clip corners, trim seam allowances to 1/4", turn fabric right side out, push out corners with tool andpress outside edges.13. Attach 1/4" seam foot and set stitch length between 3.5 and 4.Top stitch around three finished sides ofall pages and around cover.14. Lay completed pages together in order, matching up finished edges. Pin pages together on finished edgeto hold them in place.15. Attach standard foot.16. Place pinned pages inside cover, lining up book binding markings. Fold over the cover and stitch 1" fromthe fold edge to encase all pages.This forms the binding for the book.17. Finished!

Note: The book can be dressed up with ribbon, cord, or tassles by attaching or tying in binding area beforestep 16. For additional decoration, bells or small ornaments could be added to the ribbon ends!

Front Cover(Part 1 - Ch306) - Center of entire page(same as previous mark)

(Part 2 - Ch307) - 42mm up from center (Part 3 - Ch308) - 60mm down from centerFront Inside Cover

(Part 1 - Ch309) - 42mm up (Part 2 - Ch310) - 13mm down (Part 3 - Ch311) - 68mm downPage 1 (Part 1 - Ch312) - 32mm up (Part 2 - Ch313) - 39mm down (Part 3 - Ch314) - 81mm downPage 2 (Part 1 - Ch315) - 33mm up (Part 2 - Ch316) - 37mm down (Part 3 - Ch317) - 71mm downPage 3 (Part 1 - Ch318) - 29mm up (Part 2 - Ch319) - 41mm down (Part 3 - Ch320) - 74mm downPage 4 (Part 1 - Ch321) - 38mm up (Part 2 - Ch322) - 44mm down (Part 3 - Ch323) - 86mm downPage 5 (Part 1 - Ch324) - 33mm up (Part 2 - Ch325) - 46mm down (Part 3 - Ch326) - 88mm downPage 6 (Part 1 - Ch327) - 39mm up (Part 2 - Ch328) - 42mm down (Part 3 - Ch329) - 85mm down

4. Hoop each Part(1,2, and 3) of each page using your markings as your guide for hoop center.5. Slide a piece of lightweight tear-away stabilizer under the hooped fabric. Be sure that the piece oftear-away is larger than the area to be sewn.6. Sew the designs for each page following the html printable sewing sequence found in your "Download Center".

Page 7 (Part 1 - Ch330) - 43mm up (Part 2 - Ch331) - 39mm down (Part 3 - Ch332) - 80mm downPage 8 (Part 1 - Ch333) - 51mm up (Part 2 - Ch334) - 42mm down (Part 3 - Ch335) - 91mm downPage 9 (Part 1 - Ch336) - 46mm up (Part 2 - Ch337) - 43mm down (Part 3 - Ch338) - 88mm downPage 10 (Part 1 - Ch339) - 37mm up (Part 2 - Ch340) - 40mm down (Part 3 - Ch341) - 75mm downBack Inside Cover

(Part 1 - Ch342) - 7mm up (Part 2 - Ch343) - 50mm up (Part 3 - Ch344) - 40mm downBack Cover

(Part 1 - Ch345) - 7mm up (Part 2 - Ch346) - 42mm down AND

10mm to the right

2. Inside Front and Back Cover - Cut 2 pieces of fabric 10 3/4 " x 14 1/2" and 2 pieces of same size of interfacing.

3. Inside Pages - Cut 10 pieces of fabric 10 1/4 " x 13 1/2" and 10 pieces of same size of interfacing.

4. Apply interfacing to wrong side of fabric pieces using medium heat setting on iron.5. Mark a dotted line 3/4" from book binding side of all 10 pages and 2 inside cover pages. Be sure that theline is on the binding side of each page.This line is marked to help find the center of the page for embroidery.As the binding will be hidden, it is important that the area not be included when measuring for page center.6. Mark the 2" binding area in the center of the Front/Back cover.7. Mark the center of each page.When finding the center of each page for embroidery, be sure not to includethe marked binding area.

TIP - When hooping pages for embroidery, odd #'d pages and the back inside cover will have the markedbinding area on the left. Even #'d pages and the front inside page will have the marked binding on the right.

Fabric Preparation

1. Outside Cover - Cut 1 piece of fabric 22" x 14 1/2" and 1 of same size piece of interfacing.

Fabric & Notions Required

- Large Complete OR Large Split Version

* 1.1m (1 1/6yd) of 150cm (60") OR 1.5m (1 3/4yd) of 115m (45") medium weight cotton* 2m (2 1/2yd) of purchased piping or lip cord* Lightweight tear-away stabilizer(backing)* 2.5m (3yds) of 55cm (22") lightweight fusible interfacing

Front Cover(Part 1 - Ch254) - 6mm down from center

(Part 2 - Ch255) - 49mm up from center (Part 3 - Ch256) - 88mm down from centerFront Inside Cover

(Part 1 - Ch257) - 52mm up (Part 2 - Ch258) - 18mm down (Part 3 - Ch259) - 90mm downPage 1 (Part 1 - Ch260) - 36mm up (Part 2 - Ch261) - 72mm down (Part 3 - Ch262) - 113mm downPage 2 (Part 1 - Ch263) - 30mm up (Part 2 - Ch264) - 75mm down (Part 3 - Ch265) - 113mm downPage 3 (Part 1 - Ch266) - 34mm up (Part 2 - Ch267) - 75mm down (Part 3 - Ch268) - 113mm downPage 4 (Part 1 - Ch269) - 37mm up (Part 2 - Ch270) - 79mm down (Part 3 - Ch271) - 124mm downPage 5 (Part 1 - Ch272) - 34mm up (Part 2 - Ch273) - 81mm down (Part 3 - Ch274) - 123mm downPage 6 (Part 1 - Ch275) - 40mm up (Part 2 - Ch276) - 75mm down (Part 3 - Ch277) - 122mm down

4. Hoop each Part of each page using your markings as your guide for hoop center.5. Slide a piece of lightweight tear-away stabilizer under the hooped fabric. Be sure that the piece oftear-away is larger than the area to be sewn.6. Sew each design for each page following the html printable sewing sequence found in your "Download Center".

Page 7 (Part 1 - Ch278) - 41mm up (Part 2 - Ch279) - 76mm down (Part 3 - Ch280) - 122mm downPage 8 (Part 1 - Ch281) - 43mm up (Part 2 - Ch282) - 80mm down (Part 3 - Ch283) - 133mm downPage 9 (Part 1 - Ch284) - 44mm up (Part 2 - Ch285) - 79mm down (Part 3 - Ch286) - 122mm downPage 10 (Part 1 - Ch287) - 34mm up (Part 2 - Ch288) - 74mm down (Part 3 - Ch289) - 115mm downBack Inside Cover (Ch290) - 1 hoopingBack Cover (Ch291) - 1 hooping

Book Embroidery

Large Complete Version** For use with an Embroidery Hoop no smaller than - 30cm x 18cm 12" x 7 1/4"

1. Download the Stitchitize Design Pack - 'Twas the Night Before Christmas **Large Complete** Design#'sCh240-Ch253 (14 files)2.Transfer designs to your machine.3. Hoop the front/back cover piece of fused fabric.4. Slide a piece of lightweight tear-away stabilizer under the hooped fabric. Be sure that the piece of tear-awayis larger than the area to be sewn.5. Sew embroidery design following html printable sewing sequence page found in your "Download Center".6. Repeat steps 3-4-5 for all remaining designs in pack.

Large Split Version** For use with an Embroidery Hoop no smaller than - 20cm x 14cm 8" x 5 1/2"NOTE: All of the pages in this version have been split into 2 or 3 designs to fit in the hoop and willrequire muti-hooping..

1. Download the Stitchitize Design Pack - 'Twas the Night Before Christmas **Large Split**Design#'s Ch254-Ch291 (38 files)2.Transfer designs to your machine.3. Using the previously marked center of each page follow these measurements to mark the centerof each design of each page.

Book Construction 1. All seam allowances are 1⁄2 inch.2. Set up your machine for regular sewing.3. Attach Zipper Foot.4.Thread the needle and bobbin with all-purpose thread.5. Starting 1" from the end of the piping/cord and with right sides together, pin piping around outer edge ofbook cover. Ease extra piping into corners. Sew completely around outside cover stitching as close to pipingas possible.When you return to the start, overlap piping on a slight diagonal to form a "V" and stitch throughboth layers of piping.This makes a smooth overlapping join.Trim off excess piping.6.With right sides together, sew the inside front page to the outside cover on three outer sides, sewing onprevious stitching line.7. Clip corners, trim seam allowances to 1/4", turn fabric right side out, push out corners from the inside withtool and press outside edge.8. Repeat steps 6 and 7 to complete the inside back cover.9. Attach standard foot.10. Pair up embroidered inside pages - 1 and 2, 3 and 4, 5 and 6, 7 and 8, 9 and 10.11.With right sides together, sew along three sides of each set of pages, leaving binding side open.12. Clip corners, trim seam allowances to 1/4", turn fabric right side out, push out corners with tool and pressoutside edges.13. Attach 1/4" seam foot and set stitch length between 3.5 and 4.Top stitch around three finished sides of allpages and around cover.14. Lay completed pages together in order, matching up finished edges. Pin pages together on finished edgeto hold them in place.15. Attach standard foot.16. Place pinned pages inside cover, lining up book binding markings. Fold over the cover and stitch 1" fromthe fold edge to encase all pages.This forms the binding for the book.17. Finished!

Note:The book can be dressed up with ribbon, cord, or tassles by attaching or tying in binding area beforestep 16. For additional decoration, bells or small ornaments could be added to the ribbon ends!