© 2007

MMultigas Detectorultigas Detector

Reliability in a small package

What It IsWhat It Is

Personal 4-gas monitorDetects O2, H2S, CO and combustible gas

Rechargeable Li-polymer battery

Standard:Event log

Full data log

Vibrating alarm

What It Is What It Is NotNot

Not to detect NO2

Or other ‘exotic’ gases

No alkaline optionRuns for >16 hrs!

No built-in pump optionUse ALTAIR 5

No multi-languageIcon-driven, use ALTAIR 5

Small Small SizeSize

Small, unobtrusive, lightweight design

Easy to wear all day

Alarms visible from 360º

Fits in gloved hand

One-handed operation

Robust construction

Rugged DesignRugged Design

Over-molded case design

Built-in rubberized armor

Impact shock protectionEasily survives a 10-ft drop

Easy to grasp and hold

Sealed against water & dust ingress to IP67

Third-party tested

Dunk it in a bucket!

Multiple AlarmsMultiple Alarms

95+ dB horn typical

Multiple, alternating high-intensity alarm LEDsOn top and bottom of the unit!

Vibrating alarm is standard on all models

‘InstantAlert’ feature is standardActivates all alarms when desired

Optional, unique to gas detection, ‘MotionAlert’ feature

If no motion is detected for 30 sec. alarm sounds to alert others

Ideal for confined space entry

Provides ConfidenceProvides Confidence

Confidence signalGreen blinking ‘Safe LED’Vibrating pulseConfidence beep every

30 sec. to ensure operation

Can be turned offSet-up mode

Advanced FeaturesAdvanced Features‘MotionAlert’ feature

Indicates “Man Down”

‘InstantAlert’ featureActivates all alarms when desired

Most rugged instrument in its class

Easily passes multiple 10 ft drops

IP67 rated by 3rd partyWater and dust tight

Bump check mark (24 hrs)Ensures instrument was successfully tested

Advanced FeaturesAdvanced Features‘Safe LED’

Ensures instrument is operating safely

Missing sensor alarmHelps prevent mistakes after service

Password-protected setup modeControls unauthorized access

Event & data log >500 events

MSA Link-readyMulti-language PC software to access records and change settings

BatteryBattery

Li-polymer technology

Virtually no memory effects

Holds charge better

Runs >16 hoursNo need for expensive alkalines!

Cost of alkaline batteries5 days/week x 50 weeks = 250 days

250 x $3 = $750/year!! + labor

Many MarketsMany MarketsOil and Gas ChemicalFireUtilitiesAgricultureConstructionSteelWaterVarious Industrial Applications

Start UpStart UpOperation is similar to the Solaris:

Performs diagnostic self-checkDisplay3 alarmsMissing sensors

Displays:Instrument nameSoftware versionCombustible gas typeToxic units (ppm or mg/m3)Alarm set points (Low, High, STEL, TWA)

Start Start UpUp

Displays expected cal. gas concentrations

Shows current time and date

Indicates last successful cal. date

Indicates next cal. date (if activated)

Shows measurement countdown

Offers fresh air setup option

Defaults to measurement page

PagesPagesMeasurement (default)BumpPeak readingsMinimum oxygen readingSTEL for toxics (if activated)TWA for toxics (if activated)TimeDate‘MotionAlert’ (if equipped and enabled)

Data LogData LogEvent logging (500 events)

Gas and battery alarmsCal. and bump recordsBattery voltageFAS, re-zeroings, calibrationsReset of TWA, STEL and Peak

Gas records(>50 hours)

ReadingTime and datePeak, Min, AverageTemperature

Graphs & tables

Infrared-based ‘MSA Link’- compatible

Change instrument settingsLast successful calibration date

Set UpSet Up

Password-protected access

Change:Individual sensor channels Combustible gas typeAutoCal. valuesCal. due on/offAlarm set pointsLow, High, STEL, TWADateTime

Other settings through MSA Link

Multi-language

CalibrationCalibration

“Single Button AutoCal” basedAccess can be password protected

Same Solaris calibration cylinders1.45% CH4

60 ppm CO15% O2

20 ppm H2S10048280 (34L)10045035 (58L)

CalibrationCalibration

1. Press and hold ‘Reset’ button

2. Instrument prompts user to “Zero Cal?”

3. Press ‘On/Off’ to accept & initiate zero functionOr press ‘Reset’ to cancel function

4. Unit will automatically zero sensors‘Zero pass’

5. Instrument prompts user to “Span Cal?”

6. Attach cal. cap & flow cal. gas to instrument

7. Press ‘On/Off’ to accept & initiate spanOr press ‘Reset’ to cancel function

8. Unit will automatically span sensors

AccessoriesAccessories

Galaxy Automated Calibration System

Bump test and calibrationRecord keeping

QuickCheck (Q1 2008)Bump test onlyRecords activities

Charging cradle

Universal pump probe

Low-MaintenanceLow-Maintenance

Low level of end-user maintenance required:

Separate sensors

Sensor replacement kit

Filter, gasket, etc. kit

Front case with built-in filter

Battery and electronics

Most components available as replacement parts

WarrantyWarranty

Standard 2-year comprehensive warranty Sensors Electronics Battery

Optional extended warranty1 year extra2 years extraPart of ATO!

Questions?Questions?

Thanks!Thanks!