© 2012 autodesk using subassembly composer on the highway a4 construction project jordy brouwers...
TRANSCRIPT
© 2012 Autodesk
Using Subassembly Composer on the Highway A4 Construction ProjectJordy BrouwersGeonius
© 2012 Autodesk
CI2281
This class will provide an in-depth look at using the Autodesk® Subassembly Composer. Learn how to organize your workflow and create complex subassemblies of tunnels, retaining walls, highways, and others with ease. Import and update your subassemblies into AutoCAD® Civil 3D® software, and see the result in your corridor in the complete intelligent model in Autodesk® Navisworks® software. This class uses data and real-life examples of the Highway A4 construction project in The Netherlands.
© 2012 Autodesk
Learning Objectives
At the end of this class, you will be able to:
Use Subassembly Composer Set up workflows for creating complex subassemblies Export custom AutoCAD Civil 3D corridors to Navisworks Import and update custom subassemblies in Civil 3D
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
So where’s the Netherlands?
5500miles
© 2012 Autodesk
Our neighbors
© 2012 Autodesk
Our neighbors
© 2012 Autodesk
Europe
© 2012 Autodesk
The Netherlands
USA The Netherlands
Sq. Miles 3,794,101 16,158 0.43 %
Population 310,673,000 16,626,900 5.35 %
Density P / Sq.M.
82 1030
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
The Netherlands
29% below sea level
2/3 would flood without water protection
© 2012 Autodesk
Traffic Jam…
8 februari 1999 :
610 miles of ‘not moving’ traffic
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
The Netherlands
© 2012 Autodesk
SubAssemblyComposer
What is it?
© 2012 Autodesk
SACWhat is it?
© 2012 Autodesk
What is SAC ?
Introduced summer 2011
Complex subassemblies without programming
Available Civil 3D 2011, 2012 en 2013
© 2012 Autodesk
Programming subassemblies before SAC
© 2012 Autodesk
Programming subassemblies with SAC
© 2012 Autodesk
© 2012 Autodesk
© 2012 Autodesk
© 2012 Autodesk
© 2012 Autodesk
© 2012 Autodesk
© 2012 Autodesk
SACPros / Cons
© 2012 Autodesk
Voor- en nadelen
Easy to learn to make own subassemblies
Start with simple SA’s, and make them more complex
More intelligent than stock SA’s Makes a nice combo with Corridor
Solids
SAC Support pack (2011/2012) or SAC itself (2013) has to be installed at other PC’s
No encryption – like sending out source code
Not very user friendly on complex SA’s
No combination with custom .net code No Pipe Network targets
© 2012 Autodesk
SACInstallation
© 2012 Autodesk
Installation
Civil 3D 2011 & 2012 Civil 3D 2013
© 2012 Autodesk
Installation 2013
© 2012 Autodesk
Combination with Corridor Solids
© 2012 Autodesk
Combination with Corridor Solids
© 2012 Autodesk
SACOn the Highway A4
© 2012 Autodesk
1 subassembly
© 2012 Autodesk
Complete Civil 3D section, no extra work
© 2012 Autodesk
Complete Civil 3D section, no extra work.Proper use of code set styles
© 2012 Autodesk
Corridor Solids
© 2012 Autodesk
SACDemo
© 2012 Autodesk
Case 1
© 2012 Autodesk
Case 2
© 2012 Autodesk
Short demos
© 2012 Autodesk
Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.