( a govt. of karnataka enterprise ) bellary …

31-JAN-18 11:14:24

( A GOVT. OF KARNATAKA ENTERPRISE )

GR142

OFFICE OF THE

PURCHASE ENQUIRY

SE(S&P)BTPS/EL/EETM/17-18/389

SE(S&P)BTPS/EL/EEPS/17-18/390

SE(S&P)BTPS/EL/EEIC1/17-18/391



SE(S&P)BTPS/EL/EETM/17-18/398

SE(S&P)BTPS/EL/ADPH/17-18/446

Enquiry NoDate

Procurement of Oil Seal

Procurement of PVC Flexible Conduit Pipes

Procurement of Oil Gun Engauge Limit Switch

Procurement of Flow Indicator

Procurement of I/P Converter

Procurement of Door Seals

Procurement of Discharge Rods

Subject

23/02/2018 15:30

23/02/2018 15:30

23/02/2018 15:30

23/02/2018 15:30

23/02/2018 15:30

23/02/2018 15:30

23/02/2018 15:30

Last Date Of Receipt/Opening of Tender

23/02/2018 15:00

23/02/2018 15:00

23/02/2018 15:00

23/02/2018 15:00

23/02/2018 15:00

23/02/2018 15:00

23/02/2018 15:00

1

2

3

4

5

6

7

SlNo

13/12/2017

13/12/2017

13/12/2017

13/12/2017

13/12/2017

19/12/2017

23/01/2018

Sealed itemwise quotations/offers against below mentioned enquiries are invited from manufactures/authorised dealers/reputedsuppliers. The details of these enquiries are also available on website www.karnatakapower.com .

The offers may be submitted well within due date of receipt. Any further details can be had from above office by writtenrequisition.

KST No 70100202 Dated 03/09/1984 CST No 70150205 Dated 03/09/1984TIN No 29440405909 Dated 13/09/2005CIN-U85110KA1970SGC001919

SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION,KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]

SUPERINDENTING ENGINEER(S&P)BT

KARNATAKA POWER CORPORATION LIMITED

BELLARY THERMAL POWER STATION

31-JAN-18 11:14:24

Sir, Please send your quotation/offer with terms and conditions for the materials specified in the table below.

2430103019

2430103027

2430103035

2430103043

2430103051

2430103060

2430103078

Item Code

OIL SEAL 30X16X17

OIL SEAL 12.7X21.5X7

OIL SEAL 15X24X7

OIL SEAL 40X55X7

OIL SEAL 22X35X7

OIL SEAL 25X35X7

OIL SEAL 20X40X10

Item Name/Specification

10

50

10

6

40

40

10

OIL SEAL 30x16x17 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.

OIL SEAL 12.7X21.5X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.

OIL SEAL 15X24X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.





SlNo

Unit RequiredQuantity

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

1

2

3

4

5

6

7


GR142

OFFICE OF THE

PURCHASE ENQUIRY

SE(S&P)BTPS/EL/EETM/17-18/389 13/12/2017PURCHASE ENQUIRY NO : DATE :

31-JAN-18 11:14:24

2430103086

2430103094

2430103108

2430103116

2430103124

5414201077

5414201085

5414201093

Item Code

OIL SEAL 18X35X7

OIL SEAL 30X40X7

OIL SEL 35X52X 7

OIL SEALL 70X90X10

OIL SEAL 17X32X7

O-RING 104.14X5.33

O-RING 148.59X5.33

O-RING 164.69X3.53


20

16

10

10

10

8

8

16



OIL SEAL 35x52x7 MATERIAL:- NBR/MS, Specific gravity:- 1.22Gms/CC(ASTMD792),Hardness:- 70-75 Shore A degree(ASTM D 2240), Tensile Strength:->102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTM D412), Withstand atemperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombay oil seals/SS Ruber.



Size:104.14x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Size:148.59x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Size:164.69x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

8

9

10

11

12

13

14

15


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

5414201107

5414201115

5414201123

5414201131

5811501303

2430103132

2430103141

Item Code

O-RING 120.02X5.33

O-RING 215.27X5.33

O-RING 190.09X3.53

O-RING 179.7X5.33

SLEEVE O-RING

OIL SEAAL 35X50X10

OIL SEAL 50X70X10


8

6

12

6

15

10

15

C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Size:120.02x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.), Application:Boilerfeed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS




ID=70MM,THICKNESS=3.25MM MAKE: Max Spare (spareage)/Bombay oil seals/SS Ruber


OIL SEAL 50X70X10 MATERIAL: NBR/MS,SPECIFIC GRAVITY: 1.22Gms/CC(ASTMD792), Hardness: 70-75 Shore A degree(ASTM D 2240), Tensile Strength : >102kg/sqcm(ASTM D 412),

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

16

17

18

19

20

21

22


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

2430201088

2430201134

2430201177

5310831044

5311505311

5311505329

5311505337

Item Code

VITON RUBBER CHORDS3.5MMC

VITON RUBBER CHORD 6.0MM

VITON RUBBER 8.0MM

QUAD RING (CF-FILTER ELEMENT)

O-RING SEAL KIT-201

O-RING SEAL KIT-202

O-RING SEAL KIT-204


30

30

30

25

1

1

1

Elongation at break : >250%(ASTM D 412), Withstand a tempreature of 100 Deg C Make: Max Spare (spareage)/Bombay oil seals/SS Ruber.

VITON RUBBER CHORDS 3.5MM VITON-700 SHORE Hardness 70 to 75 deg.Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200deg. C /20% max, (Withstand the pressure 200 ksc & Temperature 200 deg.)MAKE:BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

VITON-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 ksc, Elogation atbreak-180% min, Compression test-24Hr/200 deg. C /20% max, (Withstand thepressure 200 ksc & Temperature 200 deg.) MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

VITONVITON-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 ksc,Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand the pressure 200 ksc & Temperature 200 deg.)MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

QUAD RING , Size :- ID 73x83x5.3 mmMaterial:-VITON-700 SHORE Hardness 70 to 75 deg.C Tensile Strength-115 ksc min. Elongation at Break-180% min. Compression Test-24Hrs/200 deg.C/20% max. MEDIA USED: FYRQUEL-EHC-46. For HP/IP supply unit filter elementMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Seal kit should consists of O-rings materil: VITONVITON-700 SHORE Hardness 70to 75 deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Seal kit should consists of O-rings materil: VITON-700 SHORE Hardness 70 to 75deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, water glycol fluids, allkinds of servo oils, Fyrquel oil etc., MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Seal kit should consists of O-rings materil: VITON-700 SHORE Hardness 70 to 75deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-

SlNo


METRES

METRES

METRES

NUMBERS

NUMBERS

NUMBERS

NUMBERS

23

24

25

26

27

28

29


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

5311505345

5312150303

5321503022

5410209022

5410210021

5410210039

Item Code

O-RING SEAL KIT-206

O-RING 68X5

O-RING 370X5

O' RING (250X8)

'O' RING (400X8)

O-RING 378X8


1

20

8

6

6

6

24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, water glycol fluids, allkinds of servo oils, Fyrquel oil etc.,MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS


O-RING ID=68 TICK= 5MM, VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C/15-20% max, O-Rings required for Thrust bearing shell (Withstand the pressure 200ksc & Temperature 200 deg.)Make :- Max Spare(spareage)/Bombay oil seals/SSRuber.


O RING 250mm X 8mm for MDBFP cooler. Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) for MDBFP cooler MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) Application:MDBFP coolerMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

30

31

32

33

34

35


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

5414201000

5414201018

5414201026

5414201034

5414201042

5414201051

5414201069

Item Code

O-RING 202.87X2

O-RING 32.92X3.53

O-RING 40.87X3.53

O-RING 69.44X3.53

O-RING 114.2X5.7

O-RING 148.82X3.53

O-RING 82.14X3.53


12

6

12

12

8

8

8

Size:202.87x2, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.), Application:Maincontrol valve of TDBFP governing systemMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Size:39.2x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.), Application:Maincontrol valve of TDBFP governing systemMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Size:40.87x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:BFP/BP Mechanical seal skid magnetic filtersMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS



Size:148.82x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.), Application:Boilerfeed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Size:82.14x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

36

37

38

39

40

41

42


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

Item Code Item Name/Specification

Application:Boiler feed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

SlNo


Important Dates: 1 . Last date for receipt of quotations/tenders/offers :2 . Opening Date of quotations/tenders/offers :

23/02/2018 15:00

23/02/2018 15:30

Important Note: 1. Quotations/Tenders/Offers shall be in a sealed cover with following superscription. a) Purchase Enquiry Number and Date . b) Date of opening2. Bidders/Agencies shall invariably furnish valid TIN along with Quotations/Offers.3. Offers without valid TIN will not be considered for evaluation.


GR142

OFFICE OF THE

PURCHASE ENQUIRY


VALIDITY : The rates offered shall be valid for a period of 180 days from the date fixed for receipt oftender/quotation.

PRICES: The price shall be quoted per Unit exclusive of Taxes and duties. The following components ofthe rates shall also be mentioned. a) F.O.R , b) Discount if any, c) GST d) Freight , e) item wise HSNcode.

TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may pleasebe noted.

QUANTITY : The quantity mentioned in the enquiry is subjected to variation depending on the finalrequirements and Purchase order condition.

GUARANTEE / WARRANTY : The materials shall be guaranteed for a period of 12 months from thedate of commissioning or 18 months from the date of dispatch whichever is earlier against manufacturingdefects/bad workmanship. During this period any defects noticed shall be replaced free of cost at sitewithout waiting for settlement of claims.

PENALTY : For delay in delivery of material beyond the stipulated delivery period, penalty @ 0.5 % perweek subject to a maximum of 5% of value of the delayed quantity shall be applicable.

QUALITY : If the materials supplied are found to be substandard, the materials will be rejected and actionwill be taken as per conditions of purchase order. Materials should be made of best quality in accordancewith the specification duly indicating IS Code, Make , Brand etc.

DEALERSHIP CERTIFICATE : Copy of valid dealership certificate shall be enclosed whereverapplicable. Copies of purchase orders placed by other TPS/ Companies shall be enclosed along with offer.

TRANSPORT: Material shall be transported only through reputed transporters on door delivery basis.

1

2

3

4

5

6

7

8

9

Terms and Conditions of Enquiry:

31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY


For KARNATAKA POWER CORPORATION LIMITED

Yours Faithfully

SUPERINDENTING ENGINEER(S&P)BTBELLARY THERMAL POWER STATION, KPCLKUDTHINI, PIN-583152Phone 9448290584 Fax 8392288616 Mail [email protected]

EARNEST MONEY DEPOSIT: If the quoted value is more than Rs. 50000.00(Fifty Thousand Only)then 1% of the quoted value shall be furnished in the form of DD/BG drawn in favour of Deputy GeneralManager (Finance)- BT, BTPS, Karnataka Power Corporation Limited, Kudathini - 583152, from anynationlised / Scheduled Bank with minimum validity of 3(Three) months in a seperate sealed cover.Exemption Certificate for EMD/SD issued by NSIC or by any State Govt or Central Govt will beconsidered.

AGREEMENT: An agreement shall be executed by the supplier ( as per KPCL format) immediately afterreceipt and acceptance of Purchase Order on pre-paid stamped duty paper Worth of Rs 100.00 beforeeffecting supply. E.M.D. will be forfeited if the supplier fails to supply the materials after acceptance /placing of purchase order.

SECURITY DEPOSIT: If the landing cost of the purchase order exceeds Rs.50000.00 (Fifty Thousand),then 5% of the landing cost shall be furnished as SD in the form of DD or BG issued from anyNationalized/Scheduled Bank and it shall be valid for the entire contract/guarantee period before effectingthe supply.

DELIVERY PERIOD: The materials shall be delivered within 30 days from the date of issue of purchaseorder.

SUIT OR PROCEEDINGS: Any Legal suit arising out of the contract shall be initiated exclusives in thelaw court at Bellary, Karnataka State only.

F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee:The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd.,Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobileno.: 9448290750, Fax No.: 08392 288616

10

11

12

13

14

15

31-JAN-18 11:14:24


2430103019

2430103027

2430103035

2430103043

2430103051

2430103060

2430103078

Item Code

OIL SEAL 30X16X17

OIL SEAL 12.7X21.5X7

OIL SEAL 15X24X7

OIL SEAL 40X55X7

OIL SEAL 22X35X7

OIL SEAL 25X35X7

OIL SEAL 20X40X10


10

50

10

6

40

40

10

OIL SEAL 30x16x17 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.

OIL SEAL 12.7X21.5X7 MATERIAL:- NBR/MS, Specific gravity:-1.22Gms/CC(ASTM D792),Hardness:- 70-75 Shore A degree(ASTM D 2240),Tensile Strength:- >102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTMD412), Withstand a temperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombayoil seals/SS Ruber.






SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

1

2

3

4

5

6

7


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

2430103086

2430103094

2430103108

2430103116

2430103124

5414201077

5414201085

5414201093

Item Code

OIL SEAL 18X35X7

OIL SEAL 30X40X7

OIL SEL 35X52X 7

OIL SEALL 70X90X10

OIL SEAL 17X32X7

O-RING 104.14X5.33

O-RING 148.59X5.33

O-RING 164.69X3.53


20

16

10

10

10

8

8

16



OIL SEAL 35x52x7 MATERIAL:- NBR/MS, Specific gravity:- 1.22Gms/CC(ASTMD792),Hardness:- 70-75 Shore A degree(ASTM D 2240), Tensile Strength:->102kg/sqcm(ASTM D 412),Elongation at break:->250%(ASTM D412), Withstand atemperatue of 100 Deg C. Make :- Max Spare(spareage)/Bombay oil seals/SS Ruber.





Size:164.69x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

8

9

10

11

12

13

14

15


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

5414201107

5414201115

5414201123

5414201131

5811501303

2430103132

2430103141

Item Code

O-RING 120.02X5.33

O-RING 215.27X5.33

O-RING 190.09X3.53

O-RING 179.7X5.33

SLEEVE O-RING

OIL SEAAL 35X50X10

OIL SEAL 50X70X10


8

6

12

6

15

10

15

C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),Application:Boiler feed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Size:120.02x5.33, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.), Application:Boilerfeed pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS




ID=70MM,THICKNESS=3.25MM MAKE: Max Spare (spareage)/Bombay oil seals/SS Ruber


OIL SEAL 50X70X10 MATERIAL: NBR/MS,SPECIFIC GRAVITY: 1.22Gms/CC(ASTMD792), Hardness: 70-75 Shore A degree(ASTM D 2240), Tensile Strength : >102kg/sqcm(ASTM D 412),

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

16

17

18

19

20

21

22


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

2430201088

2430201134

2430201177

5310831044

5311505311

5311505329

5311505337

Item Code

VITON RUBBER CHORDS3.5MMC

VITON RUBBER CHORD 6.0MM

VITON RUBBER 8.0MM

QUAD RING (CF-FILTER ELEMENT)

O-RING SEAL KIT-201

O-RING SEAL KIT-202

O-RING SEAL KIT-204


30

30

30

25

1

1

1

Elongation at break : >250%(ASTM D 412), Withstand a tempreature of 100 Deg C Make: Max Spare (spareage)/Bombay oil seals/SS Ruber.

VITON RUBBER CHORDS 3.5MM VITON-700 SHORE Hardness 70 to 75 deg.Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200deg. C /20% max, (Withstand the pressure 200 ksc & Temperature 200 deg.)MAKE:BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

VITON-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 ksc, Elogation atbreak-180% min, Compression test-24Hr/200 deg. C /20% max, (Withstand thepressure 200 ksc & Temperature 200 deg.) MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

VITONVITON-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 ksc,Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand the pressure 200 ksc & Temperature 200 deg.)MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

QUAD RING , Size :- ID 73x83x5.3 mmMaterial:-VITON-700 SHORE Hardness 70 to 75 deg.C Tensile Strength-115 ksc min. Elongation at Break-180% min. Compression Test-24Hrs/200 deg.C/20% max. MEDIA USED: FYRQUEL-EHC-46. For HP/IP supply unit filter elementMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Seal kit should consists of O-rings materil: VITONVITON-700 SHORE Hardness 70to 75 deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS


Seal kit should consists of O-rings materil: VITON-700 SHORE Hardness 70 to 75deg. Tensile strength-115 ksc, Elogation at break-180% min, Compression test-

SlNo


METRES

METRES

METRES

NUMBERS

NUMBERS

NUMBERS

NUMBERS

23

24

25

26

27

28

29


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

5311505345

5312150303

5321503022

5410209022

5410210021

5410210039

Item Code

O-RING SEAL KIT-206

O-RING 68X5

O-RING 370X5

O' RING (250X8)

'O' RING (400X8)

O-RING 378X8


1

20

8

6

6

6

24Hr/200 deg. C /15-20% max, (Withstand the pressure 200 ksc & Temperature -30-200 deg.). Compatibility:Mineral oil, Bio oils, water soluble, water glycol fluids, allkinds of servo oils, Fyrquel oil etc.,MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS




O RING 250mm X 8mm for MDBFP cooler. Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) for MDBFP cooler MAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Matetial: Viton rubber-700 SHORE Hardness 70 to 75 deg. Tensile strength-115 kscmin, Elogation at break-180% min, Compression test-24Hr/200 deg. C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.) Application:MDBFP coolerMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

30

31

32

33

34

35


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

5414201000

5414201018

5414201026

5414201034

5414201042

5414201051

5414201069

Item Code

O-RING 202.87X2

O-RING 32.92X3.53

O-RING 40.87X3.53

O-RING 69.44X3.53

O-RING 114.2X5.7

O-RING 148.82X3.53

O-RING 82.14X3.53


12

6

12

12

8

8

8

Size:202.87x2, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.), Application:Maincontrol valve of TDBFP governing systemMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Size:39.2x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.), Application:Maincontrol valve of TDBFP governing systemMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS




Size:148.82x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max,(Withstand pressure 50 ksc & Temperature 200 deg.), Application:Boilerfeed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

Size:82.14x3.53, Material:VITON-700 SHORE Hardness 70 to 75 deg. Tensilestrength-115 ksc min, Elogation at break-180% min, Compression test-24Hr/200 deg.C /20% max, (Withstand pressure 50 ksc & Temperature 200 deg.),

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

36

37

38

39

40

41

42


GR142

OFFICE OF THE

PURCHASE ENQUIRY


31-JAN-18 11:14:24

Item Code Item Name/Specification

Application:Boiler feed booster pump mechanical sealMAKE: BOMBAY OIL SEALS/MAX SAPRE(SPAREAGE)/SS RUBBERS

SlNo



23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY











1

2

3

4

5

6

7

8

9


31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY



Yours Faithfully







F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee:The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd.,Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobileno.: 9448290750, Fax No.: 08392 288616

10

11

12

13

14

15

31-JAN-18 11:14:24


1218012295

1301100163

1304011145

1304011242

1304011251

1304011269

1304032177

1309062414

1400001975

1400001983

Item Code

PVC FLEXIBLE CONDUIT PIPES 1"

PLUG TOP 16A

2X28W ELECTRONICBALLAST T5 FTL

6A SOCKET

16A SWITCH

16A SOCKET

CHOKES HPMV 125WATT

28W T5 LAMPS

MCB PROTECTED SOCKET-16 AMPS

5 PIN SOCKET & GANG BOX-16A


100

100

100

150

30

30

25

800

20

250

PVC FLEXIBLE CONDUIT PIPESSIZE:1"MAKE: MODI/POLYCAB/FINOLEX

Delux plug top 16A CONA Make code no:1991.

2X28W AC SUPPLIED ELECTRONIC BALLAST FOR T5 FTLMODEL: BJHF 228 P WARM START SUITABLE FOR FTL LAMPNote:All electrical parameters, mounting arrangements should match with existingtype BJHF 228 P of BajajMAKE: BAJAJ/Equivalent

Five in one socket 6A,screw type, make: havells/ancor/lisha/cona.

Single pole switch 16A,screw type, make: havells/ancor/lisha/cona.

Five in one socket 16A,screw type, make: havells/anchor/lisha/cona.

MAKE: BAJAJ.

28 Watts fluorescent tube light to be suitale for 28W T5 fittingProduct:FTL 18W Power Lux 6500KBase:G5Rated Lumens:2760Watts:28WRated voltage: 230V, 50HzLength:1163.2mmMake:BAJAJ/Havells/CGL only

MCB protected socket and plug with metal gang box (Sheet steel enclosure)for surface mountingCurrent rating: 16 AmpsMake: Siemens/Haavells/Anchor

5 Pin heavy duty socket & switch with metal gang box( sheet steel enclosure)with fuse and phase indicating lamp

SlNo


METRES

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

1

2

3

4

5

6

7

8

9

10


GR142

OFFICE OF THE

PURCHASE ENQUIRY

SE(S&P)BTPS/EL/EEPS/17-18/390 13/12/2017PURCHASE ENQUIRY NO : DATE :

31-JAN-18 11:14:24

1450021021

4622111115

4631321017

4638121072

5712301114

Item Code

MCB BOX 2 WAY

6A SOCKET SWITCH GANG BOX

6A 3 PIN PLUG TOP

6A SP SWITCH

TIMER FOR HIGHMAST


100

50

100

200

5

Current rating: 16 AmopsMake: Siemens/Havells/Anchor

PLASTIC MCB BOX 2 WAY

MAKE: LISHA/ANCHOR/CONA

2 in 1 SS, 6A switch and 6A 5in 1 SOCKET WITH GANG BOXMAKE: CONA/LISHA/ANCHOR/HAVELLS

6A 3 PIN PLUG TOPMAKE: HAVELLS/CONA/ELLE/GM

6A SINGLE POLE SWITCHMAKE: CONA/GM/HAVELLS

FM/1 QuartzType: QT dailyVoltage: 240 VACcontact rating: 16A/250VACproduct code: J648B1make: General Industrial Control Pvt Ltd

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

NUMBERS

11

12

13

14

15


23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY




TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may please

1

2

3


31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY


be noted.












F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal Power Station,Karnataka Power

4

5

6

7

8

9

10

11

12

13

14

15

31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY



Yours Faithfully


Corporation Ltd., Kudathini -583 152, Bellary - Dist., Karnataka - State, Mobile no.: 9448290750, Fax No.: 08392 288616

31-JAN-18 11:14:24


5715701024

Item Code

OIL GUN ADV. LIMIT SWITCH


20OIL GUN ENGAGE LIMIT SWITCHSpec: Push button type Model:SZL-WL-F, 10A 300V AC, 6A 24V DC Make: Honeywell

SlNo


NUMBERS1


23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY

SE(S&P)BTPS/EL/EEIC1/17-18/391 13/12/2017PURCHASE ENQUIRY NO : DATE :

Bidder shall be original equipment manufacturer (OEM) OR Original equipment supplier (OES) ORAuthorized dealer and shall furnish copy of OEM authorization certificate as a documentary proof.

Bidder should have supplied similar materials to any Industrial / Power utilities as a proof the PO copy shallbe submitted along with the offer

The firm shall submit original guarantee certificate from the manufacturer

1

2

3

Pre Qualification Requirements:




1

2

3


31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY













F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal Power Station,Karnataka PowerCorporation Ltd.,Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.:08392 288616

4

5

6

7

8

9

10

11

12

13

14

15

31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY



Yours Faithfully


31-JAN-18 11:14:24


5715701024

Item Code

OIL GUN ADV. LIMIT SWITCH


20OIL GUN ENGAGE LIMIT SWITCHSpec: Push button type Model:SZL-WL-F, 10A 300V AC, 6A 24V DC Make: Honeywell

SlNo


NUMBERS1


23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY








1

2

3

4

5

6


31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY



Yours Faithfully










F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal Power Station,Karnataka PowerCorporation Ltd.,Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.:08392 288616

7

8

9

10

11

12

13

14

15

31-JAN-18 11:14:24


5714915012

5714915021

Item Code

FLOW INDICATOR FOR AS/H2S SO

RING RELIEF OIL FLW INDICATOR


2

4

FLOW INDICATOR FOR AS/H2S SEAL OIL FLOWSPEC:Metal tube with tapered measuring section End to end length= 250mm,DN:50MM,PN=40KSC Flanged end connection ASME B16.5,class 150 Tube, Float and Flange material- SS316 RANGE 0 TO 110 LPM, Medium:Turbine oil with SG=0.852 Viscosity=29cst,temp=50degc SERVICE:Air side/Hydrogen side seal oil flow indication at seal oil skid. Model:H250/RR/M7 Make: Krohne Marshall Pvt. Ltd, Pune.

Flow indicator for ring relief oil flowspec:Metal tube with tapered measuring section End to end length= 250mm,DN:25MM,PN=40KSC Flanged end connection with outer dia:115mm 4 holes of dia 14mm equally spaced on PCD 85mm Tube, Float and Flange material- SS316 RANGE 0 TO 16.42 LPM, Medium:Turbine oil with SG=0.852 Viscosity=29cst,temp=50degc SERVICE:Ring relief seal oil flow indication at seal oil skid. Model:38090 Make: Instrumentation Engineers PVt. LTd.,Jeedimetla,Hyderabad.

SlNo


NUMBERS

NUMBERS

1

2


23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY



31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY














1

2

3

4

5

6

7

8

9

10

11

12

31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY



Yours Faithfully




F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd.,Kudathini -583 152, Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.: 08392 288616

13

14

15

31-JAN-18 11:14:24


5714915012

5714915021

Item Code

FLOW INDICATOR FOR AS/H2S SO

RING RELIEF OIL FLW INDICATOR


2

4

FLOW INDICATOR FOR AS/H2S SEAL OIL FLOWSPEC:Metal tube with tapered measuring section End to end length= 250mm,DN:50MM,PN=40KSC Flanged end connection ASME B16.5,class 150 Tube, Float and Flange material- SS316 RANGE 0 TO 110 LPM, Medium:Turbine oil with SG=0.852 Viscosity=29cst,temp=50degc SERVICE:Air side/Hydrogen side seal oil flow indication at seal oil skid. Model:H250/RR/M7 Make: Krohne Marshall Pvt. Ltd, Pune.

Flow indicator for ring relief oil flowspec:Metal tube with tapered measuring section End to end length= 250mm,DN:25MM,PN=40KSC Flanged end connection with outer dia:115mm 4 holes of dia 14mm equally spaced on PCD 85mm Tube, Float and Flange material- SS316 RANGE 0 TO 16.42 LPM, Medium:Turbine oil with SG=0.852 Viscosity=29cst,temp=50degc SERVICE:Ring relief seal oil flow indication at seal oil skid. Model:38090 Make: Instrumentation Engineers PVt. LTd.,Jeedimetla,Hyderabad.

SlNo


NUMBERS

NUMBERS

1

2


23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY



31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY














1

2

3

4

5

6

7

8

9

10

11

12

31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY



Yours Faithfully




F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd.,Kudathini -583 152, Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.: 08392 288616

13

14

15

31-JAN-18 11:14:24


5715504016

Item Code

I/P CONVERTER WITH VOL BOOSTER


15Supply pressure : Atleast 0.7 bar above maximum output pressure / 1.5 KSC.Input : 4-20mA dc.Output Pressure range : 0.2 to 1.0 bar.Flow capacity : Upto 300Nl/min (10scfm).(With volume booster)Connections : ¼ inch NPT female standard (plus two integral ¼ inch NPT gaugeports).Mounting : Integral surface mounting bracket to be provided for vertical mounting.Accuracy : Linearity < 1.0%.Response time : < 8 secs.Low power consumption : < 0.25 watts.Operating temperature range : -20 Deg.C to +70 Deg.C.Total error : Max error +/- 0.5% of Span.Temperature effect : Better than 1% span between -10 Deg.C to 60 Deg.C .Ingress Protection : IP65.Vibration immune.Weather proof.

SlNo


NUMBERS1


23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY


Bidder shall be original equipment manufacturer (OEM) or Original equipment supplier (OES) orAuthorized dealer and shall furnish copy of OEM authorization as a documentary proof.

Bidder should have supplied similar materials to any Industrial/Power utilities as a proof the PO copy shallbe submitted alomg with the offer .

The firm shall submit original guarantee certificate from the manufacturer.

4

5

6


1


31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY














2

3

4

5

6

7

8

9

10

11

12

13

31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY



Yours Faithfully



F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address :Consignee:The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd., Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.: 08392 288616

14

15

31-JAN-18 11:14:24


5715504016

Item Code

I/P CONVERTER WITH VOL BOOSTER


15Supply pressure : Atleast 0.7 bar above maximum output pressure / 1.5 KSC.Input : 4-20mA dc.Output Pressure range : 0.2 to 1.0 bar.Flow capacity : Upto 300Nl/min (10scfm).(With volume booster)Connections : ¼ inch NPT female standard (plus two integral ¼ inch NPT gaugeports).Mounting : Integral surface mounting bracket to be provided for vertical mounting.Accuracy : Linearity < 1.0%.Response time : < 8 secs.Low power consumption : < 0.25 watts.Operating temperature range : -20 Deg.C to +70 Deg.C.Total error : Max error +/- 0.5% of Span.Temperature effect : Better than 1% span between -10 Deg.C to 60 Deg.C .Ingress Protection : IP65.Vibration immune.Weather proof.

SlNo


NUMBERS1


23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY





1

2

3


31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY


Yours Faithfully












F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address :Consignee:The Executive Engineer(Stores)BT,Bellary Thermal PowerStation,Karnataka Power Corporation Ltd., Kudathini -583 152,Bellary - Dist., Karnataka - State,Mobile no.: 9448290750, Fax No.: 08392 288616

4

5

6

7

8

9

10

11

12

13

14

15

31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY




31-JAN-18 11:14:24


5413401145

5413401242

5413401331

5413401528

Item Code

BF VALVE DOOR SEAL

DOOR SEAL

DOOR SEAL

BF VALVE DOOR SEAL


6

26

4

12

BHEL MAKE VALVE DRG NO 09513800037/38. PART NO 11 DOOR SEALFOR BF VALVE 500 NB DRGNO 3- 216-01-12134 VAR 12 MATERIALACRYLO NITRILE RUBBER

BHEL MAKEVALVE DRG NO 09513800036/39. PART NO 09 DOOR SEALDRG NO 2-216-01-12096 FOR BF VALVE 600 NB VAR 03 MATERIALACRYLO NITRILE RUBBER

BHEL MAKE VALVE DRG NO 09513800034. PART NO 09 DOOR SEAL FORBF VALVE 800NBDRG NO 2-216-01-12096 VAR 08 MATERIAL ACRYLONITRILE RUBBER

BHEL MAKE VALVE DRG NO 09513800032. PART NO 08 DOOR SEAL FORBF VALVE 1800 NB DRG NO 29513800008 MATERIAL ACRYLO NITRILERUBBER

SlNo


NUMBERS

NUMBERS

NUMBERS

NUMBERS

1

2

3

4


23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY


VALIDITY: The rates offered shall be valid for a period of 180 days from the date of opening of thetender/quotation.


TERMS OF PAYMENT : 100% Payment with full taxes & duties as per actuals after receipt andacceptance of materials at site. If any other mode of payment is insisted/mentioned by the supplier,corporation reserves the right of loading the additional cost to arrive at the landed cost which may please

1

2

3


31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY


be noted.












F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to BTPS Stores, KPCL, Kudathini, which is situated on NH-63 approximately 24 Km from Bellaryat the following address : Consignee: The Executive Engineer(Stores)BT,

4

5

6

7

8

9

10

11

12

13

14

15

31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY



Yours Faithfully


Bellary Thermal Power Station, Karnataka Power Corporation Ltd., Kudathini -583 152, Bellary - Dist., Karnataka - State, Mobile no.: 9448290750, Fax No.: 08392 288616.

31-JAN-18 11:14:24


1111301031

2912071343

2916215382

3610701204

4010501011

Item Code

11KV DISCHARGE RODS

WIRE SLING ROPE - 2TON , 2MTR

'D SHACKLE 1.5 TON CAP.

P P ROPE 20MM

RUBBER HAND GLOVES[ELECTRICAL]


2

2

4

10

4

11KV Discharge rods along with necessary clamps, connectors, cables etc.,Specifications:Make: BEIMCOMaterila: FRP PultrudedProcess: Automatic PultrusionDesign: TelescopicLocking: Threaded coupler typeSections: 3 sectionsTotal height: 18 feet length of the cable : 10 mtrsEarthing: Die cast aluminium earthing instrumentGrounding clamp: Die cast aluminium grounding C clamps

High quality wire sling rope with test certificate.capacity:2tonlength: 2mtrmake:Slingest,Ferartara,tough ropes,Extra power, usha martin.

D SHACKLESAFE LIFT BRAND ALLOY STEEL D-SHAKLE,DROP FORGED,QUENCHED, TEMPERED AND GALVANISED.SCREWED PIN TYPE

Garware make P.P. rope 20 mm dia in length 50m.

12" heavy duty natural latex seamless hand gloves for electrical shock protection. Testpotential: 15 KV, Max. working potential: 3.3 KV as per IS 4770

SlNo


SETS

NUMBERS

NUMBERS

KILOGRAMS

PAIR

1

2

3

4

5


23/02/2018 15:00

23/02/2018 15:30



GR142

OFFICE OF THE

PURCHASE ENQUIRY

SE(S&P)BTPS/EL/ADPH/17-18/446 23/01/2018PURCHASE ENQUIRY NO : DATE :


31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY














1

2

3

4

5

6

7

8

9

10

11

12

31-JAN-18 11:14:24


GR142

OFFICE OF THE

PURCHASE ENQUIRY



Yours Faithfully




F O R AND CONSIGNEE: The material shall be delivered through reputed transporters on Door deliverybasis to the Executive Engineer (Electrical), Almatti Dam Power House (ADPH), Karnataka PowerCorporation Limited, Sitimane - 587207, Post: Rampur, Dist. Bagalkot, Karnataka State

13

14

15

( a govt. of karnataka enterprise ) bellary …

Documents