a80-vu mki… · quired to control the cutting lathe. select- able tape paths provide 0.5 or 0.6...

12

Upload: others

Post on 01-May-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and
Page 2: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and
Page 3: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and
Page 4: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and

-ts 2 -5-32*l

fffi-'-**?$ *?ü r

Page 5: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and
Page 6: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and

s:fr

{16:TR

..r_ir,ffi{,;l

,,. / $q

Page 7: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and

.iEtirt;]

Page 8: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and
Page 9: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and
Page 10: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and
Page 11: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and
Page 12: A80-VU MKI… · quired to control the cutting lathe. Select- able tape paths provide 0.5 or 0.6 revolution delay at tape speeds of 7.5, 15 or 30 ips and disc speeds of 331/3 and