© asup-2007 central tendency 1 central tendency mean, median, and mode
TRANSCRIPT
© aSup-2007 2
Central Tendency
OVERVIEW The general purpose of descriptive
statistical methods is to organize and summarize a set score
Perhaps the most common method for summarizing and describing a distribution is to find a single value that defines the average score and can serve as a representative for the entire distribution
In statistics, the concept of an average or representative score is called central tendency
© aSup-2007 3
Central Tendency
OVERVIEW Central tendency has purpose to provide
a single summary figure that best describe the central location of an entire distribution of observation
It also help simplify comparison of two or more groups tested under different conditions
There are three most commonly used in education and the behavioral sciences: mode, median, and arithmetic mean
© aSup-2007 4
Central Tendency
The MODE A common meaning of mode is
‘fashionable’, and it has much the same implication in statistics
In ungrouped distribution, the mode is the score that occurs with the greatest frequency
In grouped data, it is taken as the midpoint of the class interval that contains the greatest numbers of scores
The symbol for the mode is Mo
© aSup-2007 5
Central Tendency
The MEDIAN The median of a distribution is the point
along the scale of possible scores below which 50% of the scores fall and is there another name for P50
Thus, the median is the value that divides the distribution into halves
It symbols is Mdn
© aSup-2007 6
Central Tendency
The ARITHMETIC MEAN The arithmetic mean is the sum of all
the scores in the distribution divided by the total number of scores
Many people call this measure the average, but we will avoid this term because it is sometimes used indiscriminately for any measure of central tendency
For brevity, the arithmetic mean is usually called the mean
© aSup-2007 7
Central Tendency
The ARITHMETIC MEAN Some symbolism is needed to express the mean
mathematically. We will use the capital letter X as a collective term to specify a particular set of score (be sure to use capital letters; lower-case letters are used in a different way)
We identify an individual score in the distribution by a subscript, such as X1 (the first score), X8 (the eighth score), and so forth
You remember that n stands for the number in a sample and N for the number in a population
© aSup-2007 8
Central Tendency
Properties of the Mode The mode is easy to obtain, but it is not very
stable from sample to sample Further, when quantitative data are grouped,
the mode maybe strongly affected by the width and location of class interval
There may be more than one mode for a particular set of scores. In rectangular distribution the ultimate is reached: every score share the honor! For these reason, the mean or the median is often preferred with numerical data
However, the mode is the only measure that can be used for data that have the character of a nominal scale
© aSup-2007 10
Central Tendency
Properties of the Mean Unlike the other measures of central tendency,
the mean is responsive to the exact position of reach score in the distribution
Inspect the basic formula ΣX/n. Increasing or decreasing the value of any score changes ΣX and thus also change the value of the mean
The mean may be thought of as the balance point of the distribution, to use a mechanical analogy. There is an algebraic way of stating that the mean is the balance point:
0)( XX
© aSup-2007 11
Central Tendency
Properties of the Mean The sums of negative deviation from the
mean exactly equals the sum of the positive deviation
The mean is more sensitive to the presence (or absence) of scores at the extremes of the distribution than are the median or (ordinarily the mode
When a measure of central tendency should reflect the total of the scores, the mean is the best choice because it is the only measure based of this quantity
© aSup-2007 12
Central Tendency
The MEAN of Ungrouped Data The mean (M), commonly known as the
arithmetic average, is compute by adding all the scores in the distribution and dividing by the number of scores or cases
M =ΣX
N
© aSup-2007 13
Central Tendency
The MEAN of Grouped Data When data come to us
grouped, or when they are too
lengthy for comfortable addition without the aid of a calculating machine, or
when we are going to group them for other purpose anyway,
we find it more convenient to apply another formula for the mean:
M =Σ f.Xc
N
X Xc f f.Xc
20 - 24
15 - 19
10 - 14
5 - 9
0 - 4
22
17
12
7
2
1
4
7
5
3
22
68
84
35
6
© aSup-2007 14
Central Tendency The MEDIAN of Ungrouped
Data Method 1: When N is an odd number
list the score in order (lowest to highest), and the median is the middle score in the list
Method 2: When N is an even number list the score in order (lowest to highest), and then locate the median by finding the point halfway between the middle two scores
© aSup-2007 15
Central Tendency The MEDIAN of Ungrouped
Data Method 3: When there are several
scores with the same value in the middle of the distribution 1, 2, 2, 3, 4, 4, 4, 4, 4, 5
There are 10 scores (an even number), so you normally would use method 2 and average the middle pair to determine the median
By this method, the median would be 4
© aSup-2007 17
Central Tendency
The MEDIAN of Grouped Data There are 10 scores (an even number), so you
normally would use method 2 and average the middle pair to determine the median. By this method the median would be 4
In many ways, this is a perfectly legitimate value for the median. However when you look closely at the distribution of scores, you probably get the clear impression that X = 4 is not in the middle
The problem comes from the tendency to interpret the score of 4 as meaning exactly 4.00 instead of meaning an interval from 3.5 to 4.5
© aSup-2007 19
Central Tendency
THE MODE The word MODE means the most
common observation among a group of scores
In a frequency distribution, the mode is the score or category that has the greatest frequency
© aSup-2007 20
Central Tendency SELECTING A MEASURE OF CENTRAL
TENDENCY How do you decide which measure of
central tendency to use? The answer depends on several factors
Note that the mean is usually the preferred measure of central tendency, because the mean uses every score score in the distribution, it typically produces a good representative value
The goal of central tendency is to find the single value that best represent the entire distribution
© aSup-2007 21
Central Tendency SELECTING A MEASURE OF CENTRAL
TENDENCY Besides being a good representative, the
mean has the added advantage of being closely related to variance and standard deviation, the most common measures of variability
This relationship makes the mean a valuable measure for purposes of inferential statistics
For these reasons, and others, the mean generally is considered to be the best of the three measure of central tendency
© aSup-2007 22
Central Tendency SELECTING A MEASURE OF CENTRAL
TENDENCY But there are specific situations in
which it is impossible to compute a mean or in which the mean is not particularly representative
It is in these condition that the mode an the median are used
© aSup-2007 23
Central Tendency
WHEN TO USE THE MEDIAN1. Extreme scores or skewed distribution
When a distribution has a (few) extreme score(s), score(s) that are very different in value from most of the others, then the mean may not be a good representative of the majority of the distribution.The problem comes from the fact that one or two extreme values can have a large influence and cause the mean displaced
© aSup-2007 24
Central Tendency
WHEN TO USE THE MEDIAN2. Undetermined values
Occasionally, we will encounter a situation in which an individual has an unknown or undetermined score
Person Time (min.)
123456
811121317
Never finished
Notice that person 6 never complete the puzzle. After one hour, this person still showed no sign of solving the puzzle, so the experimenter stop him or her
© aSup-2007 25
Central Tendency
WHEN TO USE THE MEDIAN2. Undetermined values
There are two important point to be noted: The experimenter should not throw out this
individual’s score. The whole purpose to use a sample is to gain a picture of population, and this individual tells us about that part of the population cannot solve this puzzle
This person should not be given a score of X = 60 minutes. Even though the experimenter stopped the individual after 1 hour, the person did not finish the puzzle. The score that is recorded is the amount of time needed to finish. For this individual, we do not know how long this is
© aSup-2007 26
Central Tendency
WHEN TO USE THE MEDIAN3. Open-ended distribution
A distribution is said to be open-ended when there is no upper limit (or lower limit) for one of the categories
Number of children (X)
5 or more43210
322364
Notice that is impossible to compute a mean for these data because you cannot find ΣX
f
© aSup-2007 27
Central Tendency
WHEN TO USE THE MEDIAN4. Ordinal scale
when score are measured on an ordinal scale, the median is always appropriate and is usually the preferred measure of central tendency
© aSup-2007 28
Central Tendency
WHEN TO USE THE MODE Nominal scales
Because nominal scales do not measure quantity, it is impossible to compute a mean or a median for data from a nominal scale
Discrete variables indivisible categories Describes shape
the mode identifies the location of the peak (s). If you are told a set of exam score has a mean of 72 and a mode of 80, you should have a better picture of the distribution than would be available from mean alone
© aSup-2007 29
Central Tendency
CENTRAL TENDENCY AND THE SHAPE OF THE DISTRIBUTION
Because the mean, the median, and the mode are all trying to measure the same thing (central tendency), it is reasonable to expect that these three values should be related
There are situations in which all three measures will have exactly the same or different value
The relationship among the mean, median, and mode are determined by the shape of the distribution
© aSup-2007 30
Central Tendency SYMMETRICAL DISTRIBUTION
SHAPE For a symmetrical distribution, the
right-hand side will be a mirror image of the left-hand side
By definition, the mean and the median will be exactly at the center because exactly half of the area in the graph will be on either side of the center
Thus, for any symmetrical distribution, the mean and the median will be the same
© aSup-2007 31
Central Tendency SYMMETRICAL DISTRIBUTION
SHAPE If a symmetrical distribution has only one
mode, it will also be exactly in the center of the distribution. All three measures of central tendency will have same value
A bimodal distribution will have the mean and the median together in the center with the modes on each side
A rectangular distribution has no mode because all X values occur with the same frequency. Still the mean and the median will be in the center and equivalent in value