Shan{ Design. Uniqueness. Innovations }{ Design. Uniqueness. Innovations }

User manual

Technical support

Thank you forchoosing our equipment

Multi-apartment IP videooutdoor station

720P (1 Mp)

Wirelesscard reader

Table of contents

1. Package ...................................................................................................................................................................................... 3

2. Speci�cation ............................................................................................................................................................................. 3

3. Description................................................................................................................................................................................ 4

4. Installation................................................................................................................................................................................. 5

4.1 Schematic diagrams................................................................................................................................................ 5

4.2 Unit mount ................................................................................................................................................................. 7

5. Software setup......................................................................................................................................................................... 8

5.1. Device settings......................................................................................................................................................... 9

5.2. Network settings ..................................................................................................................................................... 9

5.3. Access settings ......................................................................................................................................................... 10

5.4. Misc settings ............................................................................................................................................................. 10

5.5. About system............................................................................................................................................................ 11

6. Web interface ........................................................................................................................................................................... 11

6.1. «Dashboard» bookmark........................................................................................................................................ 12

6.2. «Network» bookmark ............................................................................................................................................ 12

6.3. «Panel» bookmark................................................................................................................................................... 14

6.4. «Apartment» bookmark........................................................................................................................................ 16

6.5. «Access management» bookmark .................................................................................................................... 17

6.6. «Forward» bookmark ............................................................................................................................................. 21

6.7. «Advanced» bookmark.......................................................................................................................................... 22

6.8. «Logs» bookmark .................................................................................................................................................... 23

6.9. «Security» bookmark ............................................................................................................................................. 23

6.10. «System» bookmark............................................................................................................................................. 24

7. Limited warranty..................................................................................................................................................................... 26

Attention! As a result of continuous upgrades and functionality improvements, technical characteristics of the device can be changed without any preliminary declaration.This manual can contain some inaccuracy or misprint. The owner reserves the right to make corrections to the information described in the user manual and device package. The last revision of this manual is available on www.slinex.com

Safety instructionsPlease read and keep that manual.The device installation process should be carried out by the quali�ed specialists.Use the device from the –40 ˚C to +50 ˚C (–40 ˚F to 122 ˚F), always keep it within that temperature range.Installation surface should be free from vibration and impact in�uence.Keep this device far from open sources of heat, such as radiators, heaters, and ovens.The device can be installed near other electronic equipment in case if the temperature of the environment does not exceed previously mentioned range.The device should be protected from the direct in�uence of the natural phenomena, such as direct sunlight, rain or snow.Don’t use aggressive or abradant detergent for the device surface cleaning.Use soft wet cloth or tissues to remove strong dirt.

Nature protectionDon’t throw away the device with other industrial or nutritive trash if you see that

symbol. Some regions have separation and recycling systems for the electronic

equipment. Connect with local authorities to receive information about recycling of

electronic equipment for your region.

Rights and limitation of liabilityAll rights reserved. Any part of that document can not be published in any form, translated into other

languages or reproduced in any way including electronic or mechanical.

Document recording and copying are strictly forbidden without owner permission.

!

Shan

1 REV. 1.0 2

6

7

8

9

1

2

3

4

5

Microphone

Wireless card reader

Label

Wire connectors

Video camera

White backlight

Speaker

Display

Keyboard

1. PackageShan multi-apartment video outdoor station – 1 pc.Flush mount box – 1pc.Connection wires kit – 1 pkg.Wires cap – 1 pkg.Mounting screws – 1 pkg.User manual – 1 pc.

2. Speci�cation

3. Description

Wire connectors pinout

Shan

3 4

HORIZONTAL VIEW ANGLE117˚

LOCK RELAY CONTINUOUS CURRENT10 A

WIRELESS CARD READERMifare, Weigand 26 output for access control

BACKLIGHT TYPEWhite LED’s - 6pcs.

POWER SUPPLYDC 12 V, 2 A

POWER CONSUMPTION6.5 W in working mode, 3.6 W in standby

MOUNTING TYPEFlush mount. Mounting box dimensions:

141×359×58 mm (5.55×14.13×2.28")

UNIT DIMENSIONS

158×380×56 mm (6.22×14.96×2.20")

WORKING TEMPERATURE–40 ... +50 ˚C (–40... +122 ˚F)

SCREEN4.3” TFT color display

SENSOR1/4” CMOS

CAMERA RESOLUTION720p (1280x720), H.264 Main Pro�le

+12V GND485+485-

Lock relayoutput

RS 485interface

Powersupply &

unlocksignal

Wiegand 26interface

LANconnector

LockGND+12V

380

mm

(14.

96")

158 mm (6.22") 56 mm(2.20")

51 mm(2.00")

5

1

2

3

4

6

7

8

9

NC NC COM COM NO

EXITGNDDINDS

+5VGND

D0D1

Exit button / door sensor

Note:Total network cable length between devices must not exceed 80 meters for PoE connection (red) and 100 meters for ordinary connection (blue) without PoE.

Diagram 3. Basic network connection4. Installation4.1 Schematic diagrams

Diagram 1. Shan mechanical lock connection

Internetconnection

Shan

5 6

Mechanicallock

Lock powersupply

COMNO

GNDExit

DSDIN

Open lockbutton

Magneticlock Door

sensor

Diagram 2. Shan electromagnetic lock connection

Power supply12V, 2A

+12V GND

Imani indoor monitor Shan outdoor station

Router with PoE

WAN 1 2 3 4

CAT5 twisted pair cable

CAT5 twisted pair cablewith PoELock power

supply

NCCOMPower supply

12V, 2A

+12V GND

4.2 Unit mount

1) Take a box from the kit and place it 150-160 cm (4.9-5.2 ft.) from the �oor line.2) Prepare space in the wall that will be used for box setup. Space dimensions are 141×359×58 mm

(5.55×14.13×2.28") 3) Place installation box inside prepared space and �x it.6) Connect all communication wires and �x the wires cap. Place outdoor station inside the installation

box and �x it by two screws from the bottom side.

Shan

7 8

Flush mount

5. Software setupBelow you can see multi-apartment outdoor panel main screen:

Call: depending on the outdoor panel mode enter from 4 to 10 figures of the appartment number and

then press # to start calling;

Guard: enter 0000 on the keyboard then press # to call the guard;

Unlock: press # then enter unlock code then press # again to unlock the door;

Cancel: press * any time to delete figures or cancel a call.

Press # twice then enter Admin password (123456 by default) and press # again to enter outdoor panel settings:

Multi-apartmentoutdoor panel

Screws

Installation box

Note:Do not cover the hole on the bottom side of installation box. This hole is for the moisture removal from the space between the box and outdoor panel.

Enter number

Call : Appartment No. -> #Guard: 0000 -> #Unlock: # -> Password -> #Cancel: Press *

SIP

Use and buttons on the keyboard to navigate through the menu.

Press # button to enter current menu or change current setting value.

Press * to exit current menu or exit panel settings.

1. Device settings

2. Network settings

3. Access settings

4. Misc settings

5. About system

Shan

9 10

5.1. Device settings

In outdoor panel settings choose «Device settings» menu by and keys and press # to enter it:

Mode:«Wall panel» mode uses 10 figures to call subscriber (4 figures of the building number, 2 figures of the unit number, 2 figures of the floor number and 2 figures of the apartment number); «Unit panel» mode is using 4 figures to call the subscriber (2 figures of the floor number and 2 figures of the apartment number);Language – settings menu language;Building – building number;Unit – unit number;Index – outdoor panel logical address;Password – password to enter settings or web interface;Volume – speaker volume, from 1 to 6;Size – camera stream resolution, 320x240, 640x480 or 1280x720.

DHCP – enable or disable DHCP function;IP – door panel IP addres (192.168.1.90 or 192.168.1.91 by default);Mask – subnet mask;Gateway – gateway address;DNS – domain name server address.Mode:

Language:

Building:

Unit:

Index:

Password:

Volume:

Size:

123456

3

320x240

Unit Panel

English

1

1

1

DHCP:

IP:

Mask:

Gateway:

DNS:

Disable

192.168.1.154

255.255.255.0

192.168.1.1

8.8.8.8

Timeout:

Delay:

Elev Refer:

Password:

3

0

12

0000

5.2. Network settings

In outdoor panel settings choose «Network settings» menu by and keys and press # to enter it:

5.3. Access settings

In outdoor panel settings choose «Access settings» menu by and keys and press # to enter it:

Timeout – door relay unlocking time (in seconds);Delay – delay before unlocking (in seconds);Elev Refer – floor number where door panel installed (if elevator unit is applied);Password – door relay unlocking code.

5.4. Misc settings

In outdoor panel settings choose «Misc settings» menu by and keys and press # to enter it:

RoomNum:

Reboot:

Default:

Card:

Shan

11 12

Firmware:

UI:

IP:

MAC:

SIP:

1.6.0 20190726

1.0.0 26.07.2019

192.168.1.254

BC:F8:11:08:19:A1

OK

RoomNum – apartment number for adding wireless card. Enter apartment number then touch wireless card near card reader to add the card for the current apartment number. Then you will hear sound signal and card number will be displayed in the «Card» field;Card – card number;Reboot – outdoor panel reboot, press 1 then press # to initiate reboot process;Default – outdoor panel default settings reset, press 1 then press # to apply default settings (note that all wireless cards will be deleted while reset process).

5.5. About system

In outdoor panel settings choose «About system» menu by and keys and press # to enter it:

Firmware – door panel firmware version number;UI – user interface version number;IP – current door panel IP address;MAC – door panel MAC address;SIP – SIP connection status.

6. Web interfaceOutdoor station default IP address is 192.168.1.90 or 192.168.1.91

Enter this IP adress into PC’s browser address line to enter web interface. Note that your PC must be in the

same segment of local network (i.e. it has IP adress like 192.168.1.XXX where XXX is any number between

2 and 254, excluding 90).

Enter to the web interface using next parameters (by default):

Login: admin

Password: 123456

Then press “SIGN IN” button:

6.1. «Dashboard» bookmark

Below you can see web interface main screen:

Here you can find current outdoor station firmware version and network parameters, such as DHCP status,

Gateway IP address, Outdoor station IP address, DNS server, Subnet mask and MAC address.

6.2. «Network» bookmark

Press «Network» bookmark on the left side of the screen to enter network settings:

Network settingsDHCP – disable to enter IP address manually or enable to receive IP address automatically from network device (like router);IP – device IP address;Mask – device subnet mask;Gateway – network gateway;DNS – DNS serever IP address.

Shan

13 14

6.3. «Panel» bookmark

Press «Panel» bookmark on the left side of the screen to enter panel settings.

Appartment settingsMode– «Wall» mode is using 10 figures to call subscriber (4 figures of the building number, 2 figures of the unit number, 2 figures of the floor number and 2 figures of the flat number); «Unit» mode is using 4 figures to call the subscriber (2 figures of the floor number and 2 figures of the flat number);Building – building number;Unit – unit number;Device number – if there are several outdoor panels then use different device numbers for each device (1-9).

SIP settingsEnable/Disable – enable/disable SIP function;Proxy – proxy server name (default value – sip:pbx.slinex.com );Realm – authentication host (default value – pbx.slinex.com);STUN IP – STUN server name (default value – stun.I.google.com);STUN port – STUN port number (default value – 19302);User – SIP account user name;Password – SIP account password.

Custom NTPNTP – enable or disable automatic date and time synchronization with NTP server;URL – NTP server address;Timezone – timezone correction from UTC time.

Management systemMode – management system type, «Link» or «MS server»;URL – management server address;Password – management server password;Send realtime logs to server – send realtime status messages to management server;Heartbeat to server – check management server connection.

Shan

15 16

Call settingsEnabled – enable/disable consierge function;Number – consierge SIP number ;Call max time – calling time in seconds;Talk max time – talking time in seconds;Autocall after N digits – start calling after cartain number of digits dialed;Digits сount – specify number of digits to start calling.

Device settingsVideo quality – video resolution 320x240, 640x480 or 1280x720;RTP data profile – rtp stream data profile (default value – 102);Volume level – outdoor station volume level from 1 to 6;RTSP Username – username for accessing RTSP;RTSP Password – pasword for accessing RTSP;IR sensor – enable/disable IR sensor, which activates outdoor panel if motion is detected.

6.4. «Apartments» bookmark

Press «Apartments» bookmark on the left side of the screen to enter apartments settings:Apartment logical devision created for adding wireless identificators, unlocking codes and call redirecting

rules for the specific appartment. On pressing «NEW APARTMENT» button you can see menu below:

Shan

17 18

Building – building number;Unit – unit number;Floor – floor number;Apartment – apartment number;Residents – people quantity living in the apartment;Apartment name – family name.

Apartment address – full apartment logical address;Apartment name – family name;Residents – people quantity living in the apartment;Identifiers quantity – wireless identifiers quantity registered for current apartment;Access codes quantity – access codes quantity registered for current apartment;Forwards quantity – forwards quantity for current apartment;Actions – edit or delete current apartment.

6.5. «Access management» bookmark

Press «Access management» bookmark on the left side of the screen to enter access management settings.

Access managementMaster card – master card number;Use master code – enable/disable master code;Master code – master code value.

Enter 0 value into «Master card» field and press «SUBMIT» button.Touch wireless card near outdoor panel card reader. You will see "Admin key" message with sound signal confirmation. It means administrator card has been successfully added.

Locks managementLock open time – lock opening time in seconds;

Lock open delay – delay before lock opening in seconds.

Open lockLock #1 OPEN LOCK – initiate lock #1 opening;

Lock #1 OPEN LOCK – initiate lock #2 opening (if 2-lock extension unit is installed).

Then you can add user cards by touching them near outdoor panel card reader one by one. You will hear

sound signal confirmation and text message on the outdoor panel screen after each card adding.

Time between card registrations must not exceed 10 seconds.

Shan

19 20

«Identi�ers» menuOn the top of «Access management» page press on «Identi�ers» bookmark to enter «Identi�ers» menu. On

pressing «NEW IDENTIFIER» button you can see menu below:

Apartment number – choose apartment number from the list;

Owner name – owner personal information;

Owner type – two types are available, «Owner» or «Guest»;

Identifier type – three types are available, «Card», «UKEY» or «Access code»;

Identifier number – enter identifier card number (in decimal format) or access code up to 30 figures;

Access restrictions – choose access rule from the list;

Period restriction – enter valid time period for current identifier;

Passes restriction – enter valid quantity of enterances for current identifier;

Lock # – choose the lock to open for current identifier, «#1», «#2» or «All» options are available.

«Access restrictions» menuOn the top of «Access management» page press on «Access restrictions» bookmark to enter «Access

restrictions» menu. On pressing «NEW RESTRICTION» button you can see menu below:

Name – enter restriction name;

All day – if you need to specify exact starting and ending time then disable that function;

Start at – choose starting day and time for current restriction;

End at – choose ending day and time for current restriction;

Repeat – choose repeating cycle for curent restriction, «Never», «Daily», «Weekly», «Every two weeks»,

«Monyhly» or «Yearly» options are available;

Repeat duration – choose «Infinitely» or «Until» specified date.

Additional settingsFloor number (elevator control) – specify floor number for elevator control;

Monitor secure mode – disable individual monitor alarm when corresponding wireless identifier is

detected.

Server manage accessEnable – enable/disable server management when all the identifiers are stored on the remote server and

server manages all access requests from outdoor panel;

Use custom server – enable/disable custom management server;

Custom server – custom management server name.

Shan

21 22

6.6. «Forward» bookmark

Press «Forward» bookmark on the left side of the screen to enter forward settings.

This menu is for replacing call numbers by means of outdoor panel during calling to individual indoor

monitor, while individual monitor is unavailable or simply make call redirecion to any SIP number.Depending on the forwarding mode there could be two types of forwarding:Mode – «One by one» (if the first number doesn’t answers during 20 seconds then the call forwards to the second one and so on) or «All at once» (call forwards to all the numbers simultanneousely).

Press on «New forward» button to add forwarding rule.Apartment number – specify the number which you dial on the outdoor panel keyboard from which forwarding will be applied;Forward number – specify the number to forward to. Here you can apply P2P forwarding inside the local network or SIP forwarding.In case of P2P forwarding enter «sip:1@192.168.1.99», where «1» is the number which will be displayed on the subscriber side and 192.168.1.99 is a SIP client IP address (in case of using softphone, IP address of the softphone must be defined here).In case of SIP forwarding enter «sip:1013@pbx2.slinex.com» where 1013 is the number to forward to and «pbx2.slinex.com» is SIP server adress.You can also add several numbers for call forwarding by pressing «Add» button.

6.7. «Advanced» bookmark

Press «Advanced» bookmark on the left side of the screen to enter advanced settings.

AnnouncementEnable – enable/disable advertisement in standby mode (HTTP page or RTSP stream);

URL – advertisement address (HTTP page or RTSP stream URL);

Timeout – timeout before advertisement starts (in minutes), 10-300 minutes.

RTSP feedHere you can add up to 4 RTSP streams from IP cameras to view on the monitor while calling. Switching

between streams performed by pressing “1-5” button on the monitor, where “1” is the door station camera

stream and “2-5” are IP cameras streams. Press on «ADD» button to add IP camera RTSP address.

URL – IP camera RTSP stream address. For example: rtsp://admin:123@192.168.1.150:8554/ch01

Custom noti�cationsHere you can replace default notifications with custom one’s for different events:

Keys pressing: «Message text» – replace text message on the outdoor panel screen, «File» – replace sound

message on the outdoor panel with the custom one;

Ringback – «Message text» and/or sound «File» replacement;

Door unlock – «Message text» and/or sound «File» replacement;

Error – «Message text» and/or sound «File» replacement;

Emergency – «Message text» and/or sound «File» replacement.

Shan

23 24

6.8. «Logs» bookmark

Press «Logs» bookmark on the left side of the screen to enter logs list. Here you can find list of the actions

performed on the outdoor panel.

6.9. «Security» bookmark

Press «Security» bookmark on the left side of the screen to enter security menu. Here you can change

administrator or manager password.

Username – choose username to change the password;

Old – enter old password;

New – enter new password;

Confirm – confirm new password.

6.10. «System» bookmark

Press «System» bookmark on the left side of the screen to enter system settings.

SettingsRestore settings – choose backup file and press «RESTORE» button to restore settings;

RESET TO DEFAULT SETTINGS – press to reset to factory defaults;

Save settings – press «BACKUP WHOLE SETTINGS» button to create settings backup file.

Export/import dataImport data – choose backup file to import user data and press «CONFIRM» button to start import;

Export data – press «DOWNLOAD» button to create user date backup.

Shan

25 26

Device languageLanguage – choose outdoor panel user interface language (English, Spanish, Russian or Ukrainian);

7. Limited warranty

Manufacturer guarantees product normal functioning during the warranty period if the user keeps all

safety instructions described in that manual.

Warranty period is 12 months from the moment of the product purchasing (warranty period could be

extended up to 24 months or more, depending on the local regulations).

Warranty period allows user to make guarantee repair in cases when normal functioning of the product

was violated by the fault of manufacturer and the user haven’t o�end transporting, installation and

working conditions.

This limited warranty does not cover any damage to the product that results from improper installation,

accident, abuse, misuse, natural disaster, insu�cient or excessive electrical supply, abnormal mechanical

or environmental conditions, or any unauthorized disassembly, repair or modi�cation.

Warranty void in such cases:

• the product was damaged by the fault of the customer;

• the product wasn’t properly installed according reccomendations from the manual;

• the sticker on the backside of the product was broken;

• the product was not used for its intended function.

This limited warranty covers only repair, replacement, refund or credit for defective products, as provided

above. Manufacturer is not liable for, and does not cover under warranty, any damages or losses of any

kind whatsoever resulting from loss of, damage to, or corruption of, content or data or any costs

associated with determining the source of system problems or removing, servicing or installing products.

This warranty excludes third party software, connected equipment or stored data. Manufacturer is

therefore not liable for any losses or damage attributable to third party software, connected equipment or

stored data.

In the event a product has been discontinued, manufacturer shall either repair the product, o�er to

replace it with a comparable product or provide a refund at the lesser of the purchase price or the

product’s current value.

Repaired or replacement products will continue to be covered by this limited warranty for the remainder

of the original warranty term.

Firmware upgradeUse custom server – define custom upgrade server name and press «SUBMIT» button;

Choose file – choose firmware upgrade file and press «UPDATE FIRMWARE» button;;

CHECK FOR UPDATES – press the button to check for OTA updates then press «UPDATE FIRMWARE»

button if new firmware is available and you want to install it.

RebootREBOOT DEVICE – press to restart outdoor panel.