http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

technology      workshop      living      food      play      outside     

Low Cost Aluminum Foundaryby yehyarocks on March 24, 2015

Table of Contents

Low Cost Aluminum Foundary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Intro:   Low Cost Aluminum Foundary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Step 1:   Gather Your Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Step 2:   Connect the PVC to the Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Step 3:   Create a Safe Brick Perimeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Step 4:   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Step 5:   Placing the Foundary Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Step 6:   Placing Charcoal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Step 7:   Placing Crucible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Step 8:   Applying Air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Step 9:   Smelting and Pouring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Step 10:   Aluminum Ingot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Advertisements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Intro:  Low Cost Aluminum FoundaryOne day I went to a party and saw that a hefty amount of aluminum soda cans were being thrown in the trash bin. I wondered and decided to repurpose these cans intosmall Aluminum "Muffin" Ingots for casting.

***DISCLAIMER*** Liquid aluminum is over 660 Celsius so use all precautionary measures. Long pants/sleeves, resperator, heat gloves, face shield, etc.

Step 1: Gather Your MaterialsMaterials:

Backyard Grill Charcoal Chimney Starter

http://www.walmart.com/ip/Backyard-Grill-Charcoal-Chimney-Starter/19581245

Unica Stainless Steel Cup (18 oz.)

http://www.walmart.com/ip/Unica-Stainless-Steel-Cup-18-oz./21633441

2 in. x 2 ft. PVC-PW Sch. 40 DWV Pipe

http://thd.co/1hHL71y

2 in. PVC DWV 90 Degree Hub x Hub Elbow

http://thd.co/1hzsxTa

Style by Revlon 1875 Watt Dryer

http://www.walmart.com/ip/Style-by-Revlon-1875-Watt-Dryer/14551419

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Backyard Grill Deluxe Stainless Steel Grilling Tongs

http://www.walmart.com/ip/Backyard-Grill-Deluxe-Stainless-Steel-Grilling-Tongs/23597948

Backyard Grill Briquets, 8.3 lbs

http://www.walmart.com/ip/Backyard-Grill-Briquets-8.3-lbs/43922466

MainStays 12-Cup Cupcake Pan

http://www.walmart.com/ip/MainStays-12-Cup-Cupcake-Pan/14913178

Masking Tape

All of these items can be found at Home Depot and Walmart for insanely cheap prices.

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Step 2: Connect the PVC to the ElbowIf you purchased the right parts. The PVC Pipe should slip right in with the PVC Elbow for a tight lock. After that just slip it in to the opening you created in the perimeterand match up with the center bricks.

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Step 3: Create a Safe Brick PerimeterI had some old bricks lying around the backyard so i used them as a do not cross visual and also if an accident were to occur around the foundary, the bricks wouldprevent spreading. I put 6" of clearance frome each side of the center bricks and an opening for the pvc pipe to slip in.

Step 4: Now Tape the cool button down on your Revlon and slip it in to the end of the PVC Pipe away from the brick perimeter.

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Step 5: Placing the Foundary BodyNow that you have your brick perimeter set up and the pipe is centered, set bricks to elevate and place the Charcoal Chimney Starter centered with the Bicks and thePVC Elbow.

Step 6: Placing CharcoalSet down some paper and douse them in charcoal lighter fluid, also coat the charcoal as well. This will ensure that the charcoal will light and burn efficiently.

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Step 7: Placing CrucibleBefore lighting the fire, place the stainless steel cup (crucible) into the center of the furnace. Place charcoals around the rim of the cup to ensure leveled heating. Aftereverything is set light the charcoal and wait for the charcoal to be at a steady burn.

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Step 8: Applying AirOnce the charcoal is at a steady burn, turn the Revlon on to the low setting making sure the cool setting is taped down. Wait 2-5min before adding cans.

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Step 9: Smelting and PouringPlace cans and push down until they are melted. Be sure to scoop up the impurities and slag the cans produce. When you have enough aluminum in the crucible, pick upthe crucible with your stainless steel tongs with a firm grip and pour into muffin pan. Be sure to throw the aluminum "muffin" into a bucket of water as it is still very hotwhen it solidifies.

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Step 10: Aluminum IngotNow that the aluminum is cooled, you can either show it off or melt a couple cupcakes down for some sand casting projects!

I Entered this Instructable into the Tools Contest! Any votes are greatly appreciated!

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Related Instructables

RecyclingAluminum(Aluminium) -Make your ownAl foundry. bygavargas

Reclaim WastedSolder byzaphodd42

Coffee CanAluminumFoundry by 2k4u

Paint CanFurnace withAccessories,Lost FoamCasting, andMore! byMorgan_Demers

Quick and easybrazingaluminum,copper andnonferrousmetals bysteam_cannon

Smeltingaluminum cansto ingots byDavid Bachrach

http://www.instructables.com/id/Low-Cost-Aluminum-Foundary/

Advertisements

Comments