Каталог neobiotech is system
DESCRIPTION
ÂTRANSCRIPT
IS-II active / IS-II active S-Wide / IS-II / IS-II S-wide / IS / IS - Wide
NeobiotechIS IMPLANT SYSTEM
IS Internal Submerged System14
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
BioSeal(0.5mm)Increase sealing of soft tissueand minimize bone loss
S.L.A. SurfaceS.L.A. Surface is method that make rough surface by blasting on machined implant surface with HA(Hydroxy Apatite) particle smaller than 50㎛, and oxidizing with acid. Magic Thread
Specially designed to endure vertical force and lateral pres-sure effectively by lower half triangle thread
Coronal Macro Thread(Thread pitch 0.8mm)Excellent primary stability at cortical bone
ApexPowerful and well-defined thread exist at the peak of the apex. Initial fixation at the apex is excellent to both immediate placement and immediate loading
IS-II active
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 15 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Platform SwitchingSupports soft tissue interface for natural looking esthetics and minimize marginal bone loss
Two conical contact point Creating a strong and stable fit between fixture and abutment, minimize marginal bone loss and screw loosening
∙ Internal Conical Connection∙ 2.5 Hex∙ Conical Seal(11°)
IS Internal Submerged System16
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Platform∅ 3.9
Platform∅ 4.8
IS-II active Fixture(S.L.A. Surface)
Length
Length
Length
Length
Platform∅ 3.5
2.3mm 1.3mm
Platform∅ 3.7
Diameter∅ 3.5
Diameter∅ 4.0
Diameter∅ 4.5
Diameter∅ 5.0
• Narrow / Diameter ∅ 3.5
Length(mm) 8.5 10.0 11.5 13.0
Product name BIS3508A BIS3510A BIS3511A BIS3513A
• Regular / Diameter ∅ 4.0
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS4007A BIS4008A BIS4010A BIS4011A BIS4013A
• Regular / Diameter ∅ 4.5
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS4507A BIS4508A BIS4510A BIS4511A BIS4513A
• Wide / Diameter ∅ 5.0
Length(mm) 7.3 7.3 7.3 8.5 10.0 11.5 13.0
Product name BIS5005A BIS5006A BIS5007A BIS5008A BIS5010A BIS5011A BIS5013A
Hex2.5
Hex2.5
Hex2.5
Hex2.5
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 17 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
IS-II active S-Wide Fixture(S.L.A. Surface)
Length(mm) 7.3 7.3 7.3 8.5 10.0 11.5 13.0
Product name BIS5505A BIS5506A BIS5507A BIS5508A BIS5510A BIS5511A BIS5513A
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS6007A BIS6008A BIS6010A BIS6011A BIS6013A
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS7007A BIS7008A BIS7010A BIS7011A BIS7013A
Length
Length
Length
Platform∅ 4.5
Platform∅ 4.9
Platform∅ 5.8
Diameter∅ 5.5
Diameter∅ 6.0
Diameter∅ 7.0
• S-Wide / Diameter ∅ 5.5
• S-Wide / Diameter ∅ 6.0
• S-Wide / Diameter ∅7.0
Hex2.5
Hex2.5
Hex2.5
2.3mm 1.3mm
※ Requires S-Wide surgery kit for diameter Ø6.0 ~ Ø7.0 fixture
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
Cover ScrewNarrow / All 7.3mm Fixtures Regular / Wide / S-Wide
ISN300 ISC400
Hex1.2
Hex1.2
IS Internal Submerged System18
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
IS-II Fixture (R.B.M. Surface)
Length
Length
Length
Length
Platform∅ 3.5
Platform∅ 3.7
Platform∅ 3.9
Platform∅ 4.8
Diameter∅ 3.5
Diameter∅ 4.0
Diameter∅ 4.5
Diameter∅ 5.0
• Narrow / Diameter ∅ 3.5
Length(mm) 8.5 10.0 11.5 13.0
Product name BIS3508 BIS3510 BIS3511 BIS3513
• Regular / Diameter ∅ 4.0
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS4007 BIS4008 BIS4010 BIS4011 BIS4013
• Regular / Diameter ∅ 4.5
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS4507 BIS4508 BIS4510 BIS4511 BIS4513
• Wide / Diameter ∅ 5.0
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS5007 BIS5008 BIS5010 BIS5011 BIS5013
Hex2.5
Hex2.5
Hex2.5
Hex2.5
※ Cover Screw Included ※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 19 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
IS-II S-Wide Fixture (R.B.M. Surface)
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS6007 BIS6008 BIS6010 BIS6011 BIS6013
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS5507 BIS5508 BIS5510 BIS5511 BIS5513
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name BIS7007 BIS7008 BIS7010 BIS7011 BIS7013
Length
Platform∅ 4.5
Diameter∅ 5.5
Length
Platform∅ 4.9
Diameter∅ 6.0
Length
Platform∅ 5.8
Diameter∅ 7.0
• S-Wide / Diameter ∅ 5.5
• S-Wide / Diameter ∅ 6.0
• S-Wide / Diameter ∅7.0
※ Requires S-Wide surgery kit for diameter Ø6.0 ~ Ø7.0 fixture
Hex2.5
Hex2.5
Hex2.5
Cover ScrewNarrow / All 7.3mm Fixtures Regular / Wide / S-Wide
ISN300 ISC400
Hex1.2
Hex1.2
※ Cover Screw Included ※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
IS Internal Submerged System20
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Platform∅ 3.5
Platform∅ 3.6
Platform∅ 3.6
Platform∅ 3.75
IS Fixture (R.B.M. Surface)
Length
Length
Length
Length
Diameter∅ 3.5
Diameter∅ 4.0
Diameter∅ 4.5
Diameter∅ 4.8
• Narrow / Diameter ∅ 3.5
Length(mm) 8.5 10.0 11.5 13.0
Product name IS308 IS310 IS311 IS313
• Regular / Diameter ∅ 4.0
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name IS407 IS408 IS410 IS411 IS413
• Regular / Diameter ∅ 4.5
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name IS4507 IS4508 IS4510 IS4511 IS4513
• Wide / Diameter ∅ 4.8
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name IS507 IS508 IS510 IS511 IS513
Hex2.5
Hex2.5
Hex2.5
Hex2.5
※ Cover Screw Included ※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 21 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Platform∅ 5.4
IS S-Wide Fixture (R.B.M. Surface)
Length
Length
Platform∅ 4.4
Length
Platform∅ 4.5
Diameter∅ 5.5
Diameter∅ 6.0
Diameter∅ 7.0
• S-Wide / Diameter ∅ 5.5
• S-Wide / Diameter ∅ 6.0
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name IS607 IS608 IS610 IS611 IS613
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name IS5507 IS5508 IS5510 IS5511 IS5513
• S-Wide / Diameter ∅ 7.0
Length(mm) 7.3 8.5 10.0 11.5 13.0
Product name IS707 IS708 IS710 IS711 IS713
※ Requires S-Wide surgery kit for diameter Ø6.0 ~ Ø7.0 fixture
Hex2.5
Hex2.5
Hex2.5
Cover ScrewNarrow / All 7.3mm Fixtures Regular / Wide / S-Wide
ISN300 ISC400
Hex1.2
Hex1.2
※ Cover Screw Included ※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
※ Cover Screw Included
IS Internal Submerged System22
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Healing Abutment
Cuff(mm) 2.0 3.0 4.0 5.0 6.0 7.0
Product name ISH402 ISH403 ISH404 ISH405 ISH406 ISH407
Cuff
Diameter∅ 4.8
Cuff(mm) 2.0 3.0 4.0 5.0 6.0 7.0
Product name ISH502 ISH503 ISH504 ISH505 ISH506 ISH507
Cuff
Diameter∅ 5.5
Cuff
Diameter
Diameter∅ 4.8
5.0 Cuff
Cuff(mm) 2.0 3.0 4.0 5.0 6.0
Product name ISUH4002 ISUH4003 ISUH4004 ISUH4005 ISUH4006
Cuff
Diameter∅ 4.0
Cuff(mm) 2.0 3.0 4.0 5.0 6.0
Product name ISUH4502 ISUH4503 ISUH4504 ISUH4505 ISUH4506
Cuff
Diameter∅ 4.5
Temporary restorations for contouring of the soft tissue• Tightening torque : 8~10 Ncm
Hex1.2
• Diameter ∅ 4.0
• Diameter ∅ 4.5
• Diameter ∅ 4.8
• Diameter ∅ 5.5
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 23 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Cuff(mm) 2.0 3.0 4.0 5.0 6.0 7.0
Product name ISH602 ISH603 ISH604 ISH605 ISH606 ISH607
• Diameter ∅ 6.0
Cuff
Diameter∅ 6.0
Healing Abutment
• Diameter ∅ 8.0
Cuff(mm) 2.0 3.0 4.0 5.0 6.0 7.0
Product name ISH802 ISH803 ISH804 ISH805 ISH806 ISH807
Cuff
Diameter∅ 8.0
Cuff(mm) 2.0 3.0 4.0 5.0 6.0 7.0
Product name ISH702 ISH703 ISH704 ISH705 ISH706 ISH707
• Diameter ∅ 6.8
Cuff
Diameter∅ 6.8
Cuff(mm) 2.0 3.0 4.0 5.0 6.0 7.0
Product name ISH902 ISH903 ISH904 ISH905 ISH906 ISH907
• Diameter ∅ 9.0
Cuff
Diameter∅ 9.0
※ ∅ 8.0, ∅ 9.0 Healing Abutments are for Custom Abutment
IS Internal Submerged System24
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Length(mm) 6.0 8.0
Product name ISAHT560 ISAHT580
Length(mm) 6.0 8.0
Product name ISANT560 ISANT580
Length(mm) 6.0 8.0
Product name ISAST560 ISAST580
Temporary Abutment
Hex
Non-Hex
SCRP® Multi
Length
Cuff 2mm
Cuff 2mm
Cuff 2mm
Diameter∅ 5.2
Diameter∅ 5.2
Diameter∅ 5.2
Length
Length
Length
Cuff
Diameter
Hex1.2
Customizable titanium abutment for temporary crown and bridges• Abutment Screw(ISCS20) included, Tightening torque : 30 Ncm
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 25 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Protective capSolid abutment
Impression cap
Lab analog
Plastic coping
ISIS-IIIS-II active
Prosthetic Flow Chart - IS Excellent Solid Abutment
Note. When abutments are connected to Narrow Fixture(Ø3.5) or Short Fixture(7.3mm), the total height of abutment is 0.4mm higher than Regular-Wide cases.
IS Internal Submerged System26
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Prosthetic Flow Chart
Impression coping positioner
Impression cap
Pick up Transfer
Abutmentpositioner
Abutment positioner
Lab analog
Lab analog
Plastic coping
Straight
Straight
Shapable
Angled
Plastic coping
Gold UCLA
Plastic UCLA
CCM UCLA
ISIS-IIIS-II active
- IS Abutment
Note. When abutments are connected to Narrow Fixture(Ø3.5) or Short Fixture(7.3mm), the total height of abutment is 0.4mm higher than Regular-Wide cases.
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 27 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Prosthetic Flow Chart
Multi Unit AbutmentMulti Unit Driver Healing Cap
Pick up Transfer
ISIS-IIIS-II active
- IS Multi Unit Abutment
CCM Cylinder
Lab analog
Note. When abutments are connected to Narrow Fixture(Ø3.5) or Short Fixture(7.3mm), the total height of abutment is 0.4mm higher than Regular-Wide cases.
IS Internal Submerged System28
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Prosthetic Flow Chart
Ball abutmentdriver
Ball abutment
Lab
Lab Clinical
Lab analog
Housing
Housing
Retainer
Retainer
ISIS-IIIS-II active
- IS Ball Abutment
Note. When abutments are connected to Narrow Fixture(Ø3.5) or Short Fixture(7.3mm), the total height of abutment is 0.4mm higher than Regular-Wide cases.
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 29 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Cuff(mm) 1.0 2.0 3.0 4.0 5.0 6.0 7.0
Length
4.5mm ISAE414 ISAE424 ISAE434 ISAE444 ISAE454 ISAE464 ISAE474
5.5mm ISAE415 ISAE425 ISAE435 ISAE445 ISAE455 ISAE465 ISAE475
7.0mm ISAE417 ISAE427 ISAE437 ISAE447 ISAE457 ISAE467 ISAE477
Cuff(mm) 1.0 2.0 3.0 4.0 5.0 6.0 7.0
Length
4.5mm ISAE514 ISAE524 ISAE534 ISAE544 ISAE554 ISAE564 ISAE574
5.5mm ISAE515 ISAE525 ISAE535 ISAE545 ISAE555 ISAE565 ISAE575
7.0mm ISAE517 ISAE527 ISAE537 ISAE547 ISAE557 ISAE567 ISAE577
Cuff(mm) 1.0 2.0 3.0 4.0 5.0 6.0 7.0
Length
4.5mm ISAE614 ISAE624 ISAE634 ISAE644 ISAE654 ISAE664 ISAE674
5.5mm ISAE615 ISAE625 ISAE635 ISAE645 ISAE655 ISAE665 ISAE675
7.0mm ISAE617 ISAE627 ISAE637 ISAE647 ISAE657 ISAE667 ISAE677
Cuff(mm) 1.0 2.0 3.0 4.0 5.0 6.0 7.0
Length
4.5mm ISAE714 ISAE724 ISAE734 ISAE744 ISAE754 ISAE764 ISAE774
5.5mm ISAE715 ISAE725 ISAE735 ISAE745 ISAE755 ISAE765 ISAE775
7.0mm ISAE717 ISAE727 ISAE737 ISAE747 ISAE757 ISAE767 ISAE7 77
Excellent Solid Abutment
Diameter∅ 4.5
Cuff
Length
Diameter∅ 5.2
Cuff
Length
Diameter∅ 5.7
Cuff
Length
Diameter∅ 6.5
Cuff
Length
Cuff
Length
Diameter
• Diameter ∅ 4.5
• Diameter ∅ 5.2
• Diameter ∅ 5.7
• Diameter ∅ 6.5
Hex1.2
One piece abutment for cemented restorations• Abutment Tightening Torque : 30 Ncm, Protective Cap Included
Diameter∅ 4.5
Diameter∅ 5.2
Diameter∅ 5.7
Diameter∅ 6.5
IS Internal Submerged System30
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Hex Abutment
Cuff
Length
Diameter
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAH414 ISAH424 ISAH434 ISAH444
5.5mm ISAH415 ISAH425 ISAH435 ISAH445
7.0mm ISAH417 ISAH427 ISAH437 ISAH447Diameter
∅ 4.5
Cuff
Length
Diameter∅ 5.2
Cuff
Length Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAH514 ISAH524 ISAH534 ISAH544
5.5mm ISAH515 ISAH525 ISAH535 ISAH545
7.0mm ISAH517 ISAH527 ISAH537 ISAH547
Diameter∅ 5.7
Cuff
Length Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAH614 ISAH624 ISAH634 ISAH644
5.5mm ISAH615 ISAH625 ISAH635 ISAH645
7.0mm ISAH617 ISAH627 ISAH637 ISAH647
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAH714 ISAH724 ISAH734 ISAH744
5.5mm ISAH715 ISAH725 ISAH735 ISAH745
7.0mm ISAH717 ISAH727 ISAH737 ISAH747Diameter
∅ 6.5
Cuff
Length
• Diameter ∅ 4.5
• Diameter ∅ 5.2
• Diameter ∅ 5.7
• Diameter ∅ 6.5
Hex1.2
Cementable or Screw-retained abutment for single tooth and bridges• Customizable by grinding (need to remain at least 3mm of abutment length above fixture platform)• Abutment Screw(ISCS20) included, Tightening Torque : 30 Ncm
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 31 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAS414 ISAS424 ISAS434 ISAS444
5.5mm ISAS415 ISAS425 ISAS435 ISAS445
7.0mm ISAS417 ISAS427 ISAS437 ISAS447
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAS514 ISAS524 ISAS534 ISAS544
5.5mm ISAS515 ISAS525 ISAS535 ISAS545
7.0mm ISAS517 ISAS527 ISAS537 ISAS547
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAS614 ISAS624 ISAS634 ISAS644
5.5mm ISAS615 ISAS625 ISAS635 ISAS645
7.0mm ISAS617 ISAS627 ISAS637 ISAS647
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAS714 ISAS724 ISAS734 ISAS744
5.5mm ISAS715 ISAS725 ISAS735 ISAS745
7.0mm ISAS717 ISAS727 ISAS737 ISAS747
SCRP® Multi Abutment
Diameter
Cuff
Length
Diameter∅ 4.5
Cuff
Length
Diameter∅ 5.2
Cuff
Length
Diameter∅ 5.7
Cuff
Length
Diameter∅ 6.5
Cuff
Length
• Diameter ∅ 4.5
• Diameter ∅ 5.2
• Diameter ∅ 5.7
• Diameter ∅ 6.5
Hex1.2
Abutment for screw-cement retained prosthesis• Short hex design, Retrievable within 20° between implants• Customizable by grinding (need to remain at least 3mm of abutment length above fixture platform)• Abutment Screw(ISCS20) included, Tightening Torque : 30 Ncm
IS Internal Submerged System32
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Diameter∅ 4.5
Cuff
Length
Non-Hex Abutment
Diameter∅ 5.2
Cuff
Length
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAN414 ISAN424 ISAN434 ISAN444
5.5mm ISAN415 ISAN425 ISAN435 ISAN445
7.0mm ISAN417 ISAN427 ISAN437 ISAN447
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAN514 ISAN524 ISAN534 ISAN544
5.5mm ISAN515 ISAN525 ISAN535 ISAN545
7.0mm ISAN517 ISAN527 ISAN537 ISAN547
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAN614 ISAN624 ISAN634 ISAN644
5.5mm ISAN615 ISAN625 ISAN635 ISAN645
7.0mm ISAN617 ISAN627 ISAN637 ISAN647
Cuff(mm) 1.0 2.0 3.0 4.0
Length
4.5mm ISAN714 ISAN724 ISAN734 ISAN744
5.5mm ISAN715 ISAN725 ISAN735 ISAN745
7.0mm ISAN717 ISAN727 ISAN737 ISAN747
Diameter∅ 5.7
Cuff
Length
Diameter∅ 6.5
Cuff
Length
Cuff
Length
Diameter
• Diameter ∅ 4.5
• Diameter ∅ 5.2
• Diameter ∅ 5.7
• Diameter ∅ 6.5
Hex1.2
Cementable or Screw-retained abutment for multiple or bridges• Customizable by grinding (need to remain at least 3mm of abutment length above fixture platform)• Abutment Screw(ISCS20) included, Tightening Torque : 30 Ncm
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 33 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Angled Abutment(15°)
• Diameter ∅ 5.7A-Type(Angle to the edge)
Non-hexB-Type(Angle to the flat wall)
• Diameter ∅ 4.5
Cuff(mm) 2.0 3.0 4.0
A Type ISAHA1427 ISAHA1437 ISAHA1447
B Type ISAHB1427 ISAHB1437 ISAHB1447
Non-hex ISANA1427 ISANA1437 ISANA1447
A-Type(Angle to the edge)
Non-hexB-Type(Angle to the flat wall)
Cuff
Diameter
15°
• Diameter ∅ 5.2
Cuff(mm) 2.0 3.0 4.0
A Type ISAHA1527 ISAHA1537 ISAHA1547
B Type ISAHB1527 ISAHB1537 ISAHB1547
Non-hex ISANA1527 ISANA1537 ISANA1547
A-Type(Angle to the edge)
Non-hexB-Type(Angle to the flat wall)
Cuff(mm) 2.0 3.0 4.0
A Type ISAHA1627 ISAHA1637 ISAHA1647
B Type ISAHB1627 ISAHB1637 ISAHB1647
Non-hex ISANA1627 ISANA1637 ISANA1647
Diameter∅ 4.5
Cuff
Diameter∅ 4.5
Cuff
Diameter∅ 4.5
Cuff
Diameter∅ 5.2
Cuff
Diameter∅ 5.2
Cuff
Diameter∅ 5.2
Cuff
Diameter∅ 5.7
Cuff
Diameter∅ 5.7
Cuff
Diameter∅ 5.7
Cuff
Hex1.2
Customizable by grinding. Can be positioned in 12 directions by selecting A or B type• Abutment Screw(ISCS20) included, Tightening Torque : 30 Ncm
A-Type(Angle to the edge)
B-Type(Angle to the flat wall)
IS Internal Submerged System34
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Angled Abutment(25°)
A-Type(Angle to the edge)
Non-hex
• Diameter ∅ 4.5
Cuff(mm) 2.0 3.0 4.0
A Type ISAHA2427 ISAHA2437 ISAHA2447
B Type ISAHB2427 ISAHB2437 ISAHB2447
Non-hex ISANA2427 ISANA2437 ISANA2447
B-Type(Angle to the flat wall)
A-Type(Angle to the edge)
Non-hex
• Diameter ∅ 5.2
Cuff(mm) 2.0 3.0 4.0
A Type ISAHA2527 ISAHA2537 ISAHA2547
B Type ISAHB2527 ISAHB2537 ISAHB2547
Non-hex ISANA2527 ISANA2537 ISANA2547
B-Type(Angle to the flat wall)
Cuff
Diameter
25°
Diameter∅ 4.5
Cuff
Diameter∅ 4.5
Cuff
Diameter∅ 4.5
Cuff
Diameter∅ 5.2
Cuff
Diameter∅ 5.2
Cuff
Diameter∅ 5.2
Cuff
Hex1.2
Customizable by grinding. Can be positioned in 12 directions by selecting A or B type• Abutment Screw(ISCS20) included, Tightening Torque : 30 Ncm
A-Type(Angle to the edge)
B-Type(Angle to the flat wall)
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 35 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Shapable Abutment
Cuff
Length
Diameter
Hex SCRP Non-hex
• Diameter ∅ 4.5
Cuff(mm) 2.0 4.0
Hex ISSH428 ISSH448
SCRP ISSS428 ISSS448
Non-hex ISSN428 ISSN448Diameter
∅ 4.5
Cuff
Length8.0mm
Diameter∅ 4.5
Cuff
Length8.0mm
Diameter∅ 4.5
Cuff
Length8.0mm
Hex SCRP Non-hex
• Diameter ∅ 5.2
Cuff(mm) 2.0 4.0
Hex ISSH528 ISSH548
SCRP ISSS528 ISSS548
Non-hex ISSN528 ISSN548
Diameter∅ 5.2
Cuff
Length8.0mm
Diameter∅ 5.2
Cuff
Length8.0mm
Diameter∅ 5.2
Cuff
Length8.0mm
Hex SCRP Non-hex
• Diameter ∅ 5.7
Cuff(mm) 2.0 4.0
Hex ISSH628 ISSH648
SCRP ISSS628 ISSS648
Non-hex ISSN628 ISSN648
Diameter∅ 5.7
Cuff
Length8.0mm
Diameter∅ 5.7
Cuff
Length8.0mm
Diameter∅ 5.7
Cuff
Length8.0mm
Hex SCRP Non-hex
• Diameter ∅ 6.5
Cuff(mm) 2.0 4.0
Hex ISSH728 ISSH748
SCRP ISSS728 ISSS748
Non-hex ISSN728 ISSN748Diameter
∅ 6.5
Cuff
Length8.0mm
Diameter∅ 6.5
Cuff
Length8.0mm
Diameter∅ 6.5
Cuff
Length8.0mm
Hex1.2
Customizable by grinding (need to remain at least 3mm of abutment length above fixture platform)• Abutment Screw(ISCS20) included, Tightening Torque : 30 Ncm
IS Internal Submerged System36
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
UCLA Abutment(Gold / CCM)
Cuff
Diameter
• Gold / Diameter ∅ 4.5
Hex SCRP Non-hex
ISUGH400 ISUGS400 ISUGN400
Hex SCRP Non-hex
Diameter∅ 4.5
Cuff 1.0mm
Cuff 1.0mm
Diameter∅ 4.5
Cuff 1.0mm
Diameter∅ 4.5
• CCM / Diameter ∅ 4.5
Hex SCRP Non-hex
ISUCH400 ISUCS400 ISUCN400
Hex SCRP Non-hex
Diameter∅ 4.5
Cuff 1.0mm
Cuff 1.0mm
Diameter∅ 4.5
Cuff 1.0mm
Diameter∅ 4.5
Hex1.2
Customizable by casting. Cementable or Screw-retained abutment for single tooth and bridges.• Abutment Screw(ISCS20) included, Tightening Torque : 30 Ncm
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 37 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
UCLA Abutment(Plastic)
Diameter∅ 4.5
Diameter∅ 4.5
Diameter∅ 5.2
Diameter∅ 5.2
Diameter∅ 5.7
Diameter∅ 5.7
Cuff 1.0mm
Cuff 1.0mm
Cuff 1.0mm
Cuff 1.0mm
Cuff 1.0mm
Cuff 1.0mm
Cuff
Diameter
• Plastic / Diameter ∅ 4.5
• Plastic / Diameter ∅ 5.2
• Plastic / Diameter ∅ 5.7
Hex Non-hex
ISUPH400 ISUPN400
Hex Non-hex
ISUPH500 ISUPN500
Hex Non-hex
ISUPH600 ISUPN600
Hex
Hex
Hex
Non-hex
Non-hex
Non-hex
Hex1.2
IS Internal Submerged System38
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Protective Cap
Impression Cap
Components for Abutment Level
• Diameter ∅ 4.5
Length(mm) 4.5 5.5 7.0
Product name ISPTC445 ISPTC455 ISPTC470
• Diameter ∅ 5.2
Length(mm) 4.5 5.5 7.0
Product name ISPTC545 ISPTC555 ISPTC570
• Diameter ∅ 5.7
Length(mm) 4.5 5.5 7.0
Product name ISPTC645 ISPTC655 ISPTC670
• Diameter ∅ 6.5
Length(mm) 4.5 5.5 7.0
Product name ISPTC745 ISPTC755 ISPTC770
Diameter∅ 4.5
Diameter∅ 5.2
Diameter∅ 5.7
Diameter∅ 6.5
• Diameter ∅ 4.5
• Diameter ∅ 5.2
• Diameter ∅ 5.7
Product name ISPIC411Diameter
∅ 4.5
Length11.5m
Product name ISPIC511
Length11.5m
Diameter∅ 5.2
Product name ISPIC611
Length11.5m
Diameter∅ 5.7
• Diameter ∅ 6.5 Length11.5m
Diameter∅ 6.5
Product name ISPIC711
Length
Length
Length
Length
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 39 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
• Diameter ∅ 4.5
• Diameter ∅ 5.2
• Diameter ∅ 5.7
• Diameter ∅ 6.5
Length11.7mm
Length11.7mm
Diameter(ø) 4.5 5.2 5.7 6.5
Product name ISPCH410 ISPCH510 ISPCH610 ISPCH710
Hex
Diameter(ø) 4.5 5.2 5.7 6.5
Product name ISPCN410 ISPCN510 ISPCN610 ISPCN710
Non-Hex
Diameter∅ 4.5
Length
Cuff3.0mm
Length(mm) 4.5 5.5 7.0
Product name ISLA445 ISLA455 ISLA470
Diameter∅ 5.2
Length
Cuff3.0mm
Length(mm) 4.5 5.5 7.0
Product name ISLA545 ISLA555 ISLA570
Diameter∅ 5.7
Length
Cuff3.0mm
Length(mm) 4.5 5.5 7.0
Product name ISLA645 ISLA655 ISLA670
Diameter∅ 6.5
Diameter
Diameter
Length
Cuff3.0mm
Length(mm) 4.5 5.5 7.0
Product name ISLA745 ISLA755 ISLA770
Lab Analog
Plastic Coping
Components for Abutment Level
IS Internal Submerged System40
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Components for Fixture LevelPick Up Impression Coping
Type Hex SCRP Non-hex
Medium ISIPH400 ISIPS400 ISIPN400
* Impression coping Screw included (Medium - ISPIS20)
• Diameter ∅ 4.0
Medium Diameter∅ 4.0
Length12mm
4mm
Type Hex SCRP Non-hex
Medium ISIPH450 ISIPS450 ISIPN450
* Impression coping Screw included (Medium - ISPIS20)
• Diameter ∅ 4.5
Medium Diameter∅ 4.5
Length12mm
4mm
Type Hex SCRP Non-hex
Medium ISIPH411 ISIPS411 ISIPN411
Long ISIPHL411 ISIPSL 411 ISIPNL411
* Impression coping Screw included (Medium - ISPIS20, Long - ISPISL20)
• Diameter ∅ 4.8
Long Diameter∅ 4.8
Medium Diameter∅ 4.8
Length12mm
4mm
Length15mm
4mm
Hex1.2Hex
1.2
Hex1.2
Hex1.2
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 41 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Components for Fixture LevelPick Up Impression Coping
Type Hex SCRP Non-hex
Medium ISIPH511 ISIPS511 ISIPN511
Long ISIPHL511 ISIPSL 511 ISIPNL511
* Impression coping Screw included (Medium - ISPIS20, Long - ISPISL20)
• Diameter ∅ 5.5 Hex1.2
Hex1.2
Length12mm
4mm
Length15mm
4mm
MediumDiameter
∅ 5.5
Hex1.2
Hex1.2
Hex1.2
LongDiameter
∅ 5.5
X-Long ISPIS20L21mm
• Impression Coping Screw
Type Hex SCRP Non-hex
Medium ISIPH611 ISIPS611 ISIPN611
Long ISIPHL611 ISIPSL 611 ISIPNL611
* Impression coping Screw included (Medium - ISPIS20, Long - ISPISL20)
• Diameter ∅ 6.0
Length12mm
4mm
Length15mm
4mm
MediumDiameter
∅ 6.0 LongDiameter
∅ 6.0
IS Internal Submerged System42
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Short Long
Long
Long
Long
Short
Short
Short
Components for Fixture LevelTransfer Impression Coping
• Diameter ∅ 4.8
• Diameter ∅ 5.5
• Diameter ∅ 6.0
• Impression Coping Hex Screw
Diameter∅ 4.8
Diameter∅ 4.8
Diameter∅ 5.5
Diameter∅ 6.0
Type Hex Non-hex
Short ISITH411 ISITN411
Long ISITHL411 ISITNL411
* Impression coping Screw included (Short - ISTIS20, Long - ISTISL20)
Diameter∅ 5.5
Type Hex Non-hex
Short ISITH511 ISITN511
Long ISITHL511 ISITNL511
* Impression coping Screw included (Short - ISTIS20, Long - ISTISL20)
Diameter∅ 6.0
Type Hex Non-hex
Short ISITH611 ISITN611
Long ISITHL611 ISITNL611
Short ISTIS20H
Long ISTISL20H
* Impression coping Screw included (Short - ISTIS20, Long - ISTISL20)
Non- hex
Non- hex
Non- hex
Length12mm
Length12mm
Length12mm
12mm
2mm
2mm
2mm
2mm
Length15mm
Length15mm
Length15mm
15mm
2mm
2mm
2mm
2mmHex1.2
Hex1.2
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 43 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Components for Fixture Level
* Connected to transfer impression coping
Product name FDHSET01
Transfer Impression Coping Positioner
Lab Analog
Diameter∅ 4.3
Diameter 4.3
Product name ISLA500
IS Internal Submerged System44
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Multi Unit Abutment
Diameter∅ 4.8
Cuff
Cuff(mm) 1.5 2.5 3.5 4.0
Product name ISMUA4810 ISMUA4820 ISMUA4830 ISMUA4840
Multi Unit Abutment
Diameter∅ 4.8
Length4.1mm
Length(mm) 4.1
Product name MUAHC48
Healing Cap
Cuff
Length(mm) 12
Product name MUACCN48
* Cylinder Screw(MUAS 14) Included
CCM Cylinder, Non-hex
Diameter∅ 4.8
Length12.0mm
* Cylinder Screw(MUAS 14) Included
Length(mm) 11
Product name MUATPCN48
Temporary Cylinder, Non-Hex
Diameter∅ 4.8
Length11.0mm
* Holder(MUAH48) Included
Hex1.2
Hex1.2
Hex1.2
Screw-retained abutment for multiple or bridges• Abutment Tightening Torque : 30 Ncm, Cylinder screw 15 Ncm
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 45 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Multi Unit Abutment
Product name MUAD48
Multi Unit Abutment Driver
Diameter∅ 4.8
Product name MUALA48
Lab analog
Length(mm) 9
Product name MUAIT48Diameter
∅ 4.8
Length9.0mm
Transfer Impression Coping
Diameter∅ 4.8
Length9.0mm
4.9mm
Length(mm) 9
Product name MUAIP48
Pick-up Impression Coping
Hex1.2
Hex1.2
IS Internal Submerged System46
* Scale 1 : 1.1* Scale 1 : 1.1 * Scale 1 : 1.1* Scale 1 : 1.1
Ball Abutment
Retainer
Cuff
Diameter∅ 3.5
Hex 2.4mm
Cuff(mm) 1.0 2.0 3.0 4.0
Product name ISABA100 ISABA200 ISABA300 ISABA400
Cuff
Diameter
Hex2.4mm
Product name BAR20Diameter
∅ 5.0
Length2.0mm
Housing
Product name BAH40
Diameter∅ 5.0
Length4.0mm
Ball AbutmentImplant over-denture ball attachment system
• Compensation degree : Max 20° between implants • Abutment Tightening Torque : 30 Ncm
* Ball Abutment Driver(BADH24) Required
* O-ring(BAORING) 5ea and O-ring(BAOIMP) 1ea Included
* O-ring(BAORING) 5ea and O-ring(BAOIMP) 1ea Included
* In case of occlusion interval is lower, use retainer instead of housing
* Scale 1 : 1.1* Scale 1 : 1.1
IS Internal Submerged System 47 IS Implant System
* Scale 1 : 1.1* Scale 1 : 1.1
Product name BAORING
Product name BAOIMP
Diameter∅ 4.5
Diameter∅ 4.5
Product name BALA350
Diameter∅ 3.5
Ball Lab Analog
Ball AbutmentDriver
Product name BADH24
Diameter∅ 5.0
Hex2.4
Length25.0mm
Ball Abutment
O-Ring (Clinical)
O-Ring (Lab)
* 3ea Included* Prevents the resin flowing into the under of
Housing or Retainer
1. while making a final resin denture at laboratory.
2. while inserting Housing or Retainer within denture directly at the office.
* 3ea Included
S-MiniImplant System
IS Full Kit / EB & IT Kit / S-Mini Kit / S-Wide Kit / Neo Surgical Accessory Kit / Neo Prosthetic Kit
NeobiotechSURGICAL KIT
Surgical Kit108
* Scale 1 : 1* Scale 1 : 1 * Scale 1 : 1* Scale 1 : 1
IS Full Kit
Surgical Drill
Drill Extension
Stopper
Connector
Point Lindemann Countersink
Parallel PinDirection Pin Fixture DriverHex Driver
Profile Tap
This kit can be used to perform implant surgery for IS-II active, IS-II, IS (Ø3.5~Ø5.5).For S-Wide(diameter Ø6.0~Ø7.0) implant surgery, S-Wide Kit additionally required
• Drill Length Guide
33.5mm
21.5mm
38.5mm
▲ Twist Drill ▲ Twist Drill + Contra Angle ▲ Twist Drill + Extention +Contra Angle
Product name ISFKIT
13mm
11.5mm
10mm8.5mm
7mm
1mm
※ The marking of drill is 1mm longer than that of fixture length
* Scale 1 : 1* Scale 1 : 1
Surgical Kit 109
Surgical Kit
* Scale 1 : 1* Scale 1 : 1
※ Stoppers are cannot connected to Ø4.9 Twist Drill(TSD49F) only
IS Full Kit Components
• Stopper
Length(mm) 3.0 4.0 5.0 6.0 7.0 8.5 10.0 11.5 13
Product name DS030F DS040F DS050F DS060F DS070F DS085F DS100F DS115F DS130FLength
13.011
.510
8.57.
06.05.
04.03.
0
Diameter Product name
Ø2.5 LDS25
1mm
1mm
1mm
1mm
33.5mm
0
D2 : ∅ 2.5 D1 : ∅ 1.2D1
D2
7 8.5 10 11.5 13
• Point Lindemann DrillLD
S Ø
2.5
• Initial Drill
Diameter Product name
Ø2.2 TSD22F
7 8.5 10 11.5 13
0
F Ø
2.2
∅ 2.2
33.5mm
7 8.5 10 11.5 13
• Twist Drill
Diameter Product name
Ø2.9 TSD29F
Ø3.4 TSD34F
Ø3.9 TSD39F
Ø4.4 TSD44F
Ø4.9 TSD49F
※ Rounded Tip
F Ø
2.9
F Ø
3.4
F Ø
3.9
F Ø
4.4
F Ø
4.9
∅ 2.9 ∅ 3.4 ∅ 3.9 ∅ 4.4 ∅ 4.9
0
33.5mm
Surgical Kit110
* Scale 1 : 1* Scale 1 : 1 * Scale 1 : 1* Scale 1 : 1
• Ratchet Connector
Short Long
• IS Fixture Driver
Length Product name
Ratchet (Short) ISFDR10F
Ratchet (Long) ISFDR15F
Contra Angle ISFDH25SF
IS Full Kit Components
• Countersink
Short Long
4.5mm
ISCS
35F
ISCS
40F
ISCS
45F
ISCS
50F
ISCS
55F
∅ 3.5 ∅ 4.0 ∅ 4.5 ∅ 5.0 ∅ 5.5
Diameter Product name
Ø3.5 ISCS35F
Ø4.0 ISCS40F
Ø4.5 ISCS45F
Ø5.0 ISCS50F
Ø5.5 ISCS55F
B (Hard Bone)
C (Super Hard Bone)
A (Soft Bone)
• Profile Tap
30mm
8.5mm
10mm
10mm15mm
15mm23mm
7mm 8.5mm 10mm
7mm
∅ 3.5 ∅ 4.0 ∅ 4.5 ∅ 5.0 ∅ 5.5
Diameter Product name
Ø3.5 PTAP35F
Ø4.0 PTAP40F
Ø4.5 PTAP45F
Ø5.0 PTAP50F
Ø5.5 PTAP55F
Length Product name
Short RC10
Long RC15
∅ 5.0 ∅ 6.0
• Direction Pin
Diameter Product name
Ø 5.0 DPI550
Ø 6.0 DPI560
• Parallel Pin
Length Product name
7.0 mm PP07F
8.5 mm PP08F
10.0 mm PP10F
PTA
P35F
PTA
P40F
PTA
P45F
PTA
P50F
PTA
P55F
26.5mm
∅ 2.2∅ 2.2
∅ 2.2
* Scale 1 : 1* Scale 1 : 1
Surgical Kit 111
Surgical Kit
* Scale 1 : 1* Scale 1 : 1
IS Full Kit Components
• Hex Driver • Drill Extension
Product name HD1215 Product name DE01
• Torque Ratchet
Product name TW60
• Driver Holder
Product name DH01
15mm
Hex1.2
Surgical Kit112
* Scale 1 : 1* Scale 1 : 1 * Scale 1 : 1* Scale 1 : 1
IS Full Kit - IS-II active, IS-II Drilling SequenceDrilling Speed & Torque
Twist DrillØ 2.9
Point Lindemann Ø 2.5
Initial DrillØ 2.2
Twist DrillØ 3.4
Twist DrillØ 3.9
D1
D210mm
Tip Length1 mm
Profile TapØ 4.5
• IS-II active Fixture Ø4.5 X 10mm (D1/D2 bone)
D1
D210mm
Tip Length1 mm
Profile TapØ 5.0
• IS-II active Fixture Ø5.0 X 10mm (D1/D2 bone)Twist Drill
Ø 2.9Point Lindemann
Ø 2.5Initial Drill
Ø 2.2Twist Drill
Ø 3.4Twist Drill
Ø 3.9Twist Drill
Ø 4.4
Twist DrillØ 2.9
Point Lindemann Ø 2.5
Initial DrillØ 2.2
Twist DrillØ 3.4
D1
D210mm
Tip Length1 mm
Profile TapØ 4.0
• IS-II active Fixture Ø4.0 X 10mm (D1/D2 bone)
Point Lindemann Ø 2.5
Initial DrillØ 2.2
Twist DrillØ 2.9
※ In soft(D4) bone, use Point Lindemann Drill fully only
D1
D210mm
Tip Length1 mm
Profile TapØ 3.5
• IS-II active Fixture Ø3.5 X 10mm (D1/D2 bone)
• Point Lindemann, Initial Drill, Twist Drill : 1,200rpm / 30~45Ncm Profile Tap : 50rpm / 50Ncm
※ In soft(D4) bone or in condition of getting initial fixation at implant apex, Ø3.4 twist drill is the final drill
※ In soft(D4) bone or in condition of getting initial fixation at implant apex, Ø3.9 twist drill is the final drill
※ In soft(D4) bone or in condition of getting initial fixation at implant apex, Ø2.9 twist drill is the final drill
* Scale 1 : 1* Scale 1 : 1
Surgical Kit 113
Surgical Kit
* Scale 1 : 1* Scale 1 : 1
IS Full Kit - IS Drilling SequenceDrilling Speed & Torque
Twist DrillØ 2.9
Point Lindemann Ø 2.5
Initial DrillØ 2.2
Twist DrillØ 3.4
D1
D210mm
Tip Length1 mm
Twist DrillØ 3.9
CountersinkØ 4.5
• IS Fixture Ø4.5 X 10mm (D1/D2 bone)
Ta Twist DrillØ 2.9
Point Lindemann Ø 2.5
Initial DrillØ 2.2
Twist DrillØ 3.4
Twist DrillØ 3.9
D1
D210mm
Tip Length1 mm
Twist DrillØ 4.4
CountersinkØ 5.0
• IS Fixture Ø5.0 X 10mm (D1/D2 bone)
Twist DrillØ 2.9
D1
D210mm
Tip Length1 mm
Point Lindemann Ø 2.5
Initial DrillØ 2.2
Twist DrillØ 3.4
CountersinkØ 4.0
• IS Fixture Ø4.0 X 10mm (D1/D2 bone)
※ In soft(D4) bone, use Point Lindemann Drill fully only
D1
D210mm
Tip Length1 mm
Point Lindemann Ø 2.5
Initial DrillØ 2.2
Twist DrillØ 2.9
CountersinkØ 3.5
• IS Fixture Ø3.5 X 10mm (D1/D2 bone)
• Point Lindemann, Initial Drill, Twist Drill, Countersink : 1,200rpm / 30~45Ncm
※ In soft(D4) bone or in condition of getting initial fixation at implant apex, Ø3.4 twist drill is the final drill
※ In soft(D4) bone or in condition of getting initial fixation at implant apex, Ø3.9 twist drill is the final drill
※ In soft(D4) bone or in condition of getting initial fixation at implant apex, Ø2.9 twist drill is the final drill
* Scale 1 : 1* Scale 1 : 1
Surgical Kit 121
Surgical Kit
* Scale 1 : 1* Scale 1 : 1
S-Wide KitS-Wide Twist Surgical Drill Hex Driver
Multi ProfileTrephine Drill S-WideSurgical Tap
S-Wide Stopper Connector
• S-wide Twist Surgical Drill
This kit can be used to perform implant surgery for IS S-Wide(Ø5.5~Ø7.0), EB S-Wide(Ø5.5~Ø6.0).
• S-wide Drill Stopper
Length(mm) 6.0 7.0 8.5 10.0 11.5
Product name DSL060 DSL070 DSL085 DSL100 DSL115
Product name SWKIT
• Hex Driver
Type Product name
1.2Hex HD1212
15mm
Hex1.2
Diameter Product name
Ø5.5 TD55
Ø6.0 TD60
Ø7.0 TD70
• S-Wide Surgical Tap
∅ 5.5 ∅ 6.0 ∅ 7.0
• S-Wide Multi Profile
Diameter Product name
Ø5.5 MP55
Ø6.0 MP60
Ø7.0 MP70
∅ 5.5(EB) ∅ 6.0(IS) ∅ 7.0(IS)
Diameter Product name
Ø4.8 TSD48
Ø5.0 TSD50
Ø5.5 TSD55
Ø6.0 TSD60
Ø6.5 TSD65
-0.5mm
78.51011.5
0
• Trephine Drill
Diameter Product name
Ø4.0 / Ø5.0 TB40
Ø5.0 / Ø6.0 TB50
• Connector
Type Product name
Ratchet RC10
Contra Angle CAA0010mm
78.51011.513
0