overview studio technology on stage … · // the casing of the microphone can be cleaned easily...
TRANSCRIPT
![Page 1: Overview STUDIO TECHNOLOGY ON STAGE … · // The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning. // The integrated](https://reader031.vdocuments.net/reader031/viewer/2022022605/5b6b1bbc7f8b9a51308d6da0/html5/thumbnails/1.jpg)
// Overview// Handheld large diaphragm condenser microphone
// Cardioid polar pattern for effective isolation of the main sound source
// Flat frequency response for natural sound
// 2 pre-attenuation settings: 0 dB, -10 dB
// 2 low-cut settings: linear, 80 Hz (6 dB/oct)
// LED status indicator for low-cut and pre-attenuation settings
// Integrated acoustic pop and windshield - washable
// Solid full-metal, die-cast body
// Gold plated & corrosion-resistant 3-pin XLR output connector
Top applications // Vocals, acoustic instruments, studio & live applications, spoken word and live interviews
// User interface1 LED status indicator // Indicates active low-cut fi lter (A) and pre-attenuation setting (B): A1: linear A2: 80Hz (6 dB/oct) B1: 0 dB attenuation B2: -10 dB attenuation
2 LED slide switch // The LED status indicator can be turned on/off using the slide switch.
3 Attenuation level slide switch // Choose the attenuation level by adjusting the slide switch. Attenuation levels are: 0 dB and -10 dB. Attenuation is used in high SPL environments in order to prevent clipping of the microphone, mixer and other audio equipment.
4 Low-cut fi lter slide switch // Choose between linear and 80 Hz (6 dB/oct) settings by adjusting the slide switch. Low-cut fi lters eliminate low-frequency sounds to compensate the proximity effect and reduce structure-borne noise.
1
2 3
41
A
1 2
B
LEWITT ®Burggasse 791070 Vienna Austriawww.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received,including interference that may cause undesired operation.
// Getting started1 Connect your microphone to your mixing console, audio interface or microphone preamplifi er with a 3-pin XLR cable.
2 Supply the MTP 740 CM with 48V phantom power.
3 Set the input gain on your mixing console, preamp, etc. accordingly.
4 To ensure best sound quality, do not cover any part of the grille.
// Please Note// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures.
// Do not apply extensive force on the switches or cable of the microphone.
// Do not attempt to modify or fi x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.
// The integrated acoustic pop and windshield can be washed with soap water, if necessary.
READ THEFULL MANUAL!LEARN EVERYTHING ABOUT YOUR MTP 740 CMwww.lewitt-audio.com/resources/manuals/MTP-740-CM.pdf
// MTP 740 CMQUICKSTART GUIDES
TU
DIO
TE
CH
NO
LOG
YO
N S
TAG
EH
AN
DH
EL
D P
ER
FO
RM
AN
CE
MIC
RO
PH
ON
EW
ITH
1-I
NC
H S
TU
DIO
CO
ND
EN
SE
R C
AP
SU
LE