© siemens ag 2007
TRANSCRIPT
$% &
'(&) * +$
'!& 045 1
,- .- $, $
© Siemens AG 2007© Siemens AG 2007
Low-Voltage Controls and DistributionSIRIUS · SENTRON · SIVACONOrder No.:CatalogE86060-K1002-A101-A7-7600Technical Information incl.
LV 1
LV 1 T
Systems · Controlgear: Contactors and contactor assemblies, solid-state switching devices · Protection equipment · Load feeders, motor starters and soft starters · Monitoring and con-trol devices · Detecting devices · Commanding and signaling devices · Transformers · Power supplies · Planning and config-uration with SIRIUS · Power Management System · SIVACON Power, distribution boards, busway and cubicle systems · SENTRON switching and protection devices for power distrubu-tion · Air circuit breakers, molded case circuit-breakers, switch disconnectors · Software for power distribution· BETA low-voltage circuit protection
Low-VoltageControls and Components for Applications according to ULOrder no.:E86060-K1816-A101-A1-7600
LV 16 SIRIUS 3RV17 and 3RV18 motor starter protectors according to UL 489 · SIVACON Components for 8US Distribution Systems according to UL 508A · SENTRON 3WL5 air circuit breakers/non-automatic air circuit breakers according to UL 489/IEC · SENTRON 3VL Molded Case Circuit Breakers according to UL 489/IEC · ALPHA Devices according to UL Standard · BETA Devices according to UL standard
Industrial CommunicationIndustrial Communicationfor Automation and DrivesOrder No.:E86060-K6710-A101-B6-7600E86060-K6710-A121-A2-7600
IK PIIK PI N
PROFINET/Industrial Ethernet · Industrial Mobile Communicaton · PROFIBUS to IEC 61158/EN 50170 · SIMATIC ET 200 distributed I/Os · AS-Interface to EN 50295/IEC 61158 · Remote operation with SINAUT Telecontrol · Routers · ECO-FAST system
SICUBESystem Cubicles and Cubicle Air-ConditioningOrder No.:E86060-K1920-A101-A3-7600
LV 50 System cubicles · Cubicle modifications · Cubicle expansion components · Accessories · Special cubiclesCubicle solutions in applications · Cubicle air-conditioning · Special colors
SIDACReactors and FiltersOrder No.:E86060-K2803-A101-A4-7600
LV 60 Commutating reactors for converters · Mains reactors for fre-quency converters · Iron-core output reactors · Ferrite output reactors · Iron-core smoothing reactors · Smooth-ing air-core reactors · Filter reactors · Application-specific reactors · Radio interference suppression filters · dv/dt filters · Sinewave filters
SIVACON 8PSCD-K, BD01, BD2 Busbar Trunking Systemsup to 1250 AOrder No.:E86060-K1870-A101-A3-7600
LV 70 Busbar trunking systems, overview · CD-K system (25 A to 40 A) · BD01 system (40 A to 160 A) · BD2 system (160 A to 1250 A)
Automation & DrivesThe A&D Offline MallCD-ROM:E86060-D4001-A110-C6-7600DVD:E86060-D4001-A510-C6-7600
CA 01 All Automation and Drives products,including those in the catalogs listed above.
A&D MallInternet:http://www.siemens.com/automation/mall
All Automation and Drives products, including those in the catalogs listed above.
Catalog-PDFInternet:http://www.automation.siemens.com/cd
All catalogs for low-voltage controls and distribution can be downloaded as PDF files.
Registered trademarks Technical Assistance
All product designations may be registered trademarks or product names of Siemens AG or other supplying companies. Third parties using these trademarks or product names for their own purposes may infringe upon the rights of the trademark owners.Further information about low-voltage controls is available on the Internet at:http://www.siemens.com/lowvoltage
Expert technical assistance for Low-voltage controls and electrical installation.Tel.: +49 (9 11) 8 95-59 00Fax: +49 (9 11) 8 95-59 07E-Mail: [email protected]
%&'&'(
!"!#
$ %&
'##() ()*+*,(-+.(*/.
!"#$%&'&'(
Related catalogs Contents
© Siemens AG 2007© Siemens AG 2007
© Siemens AG 2007
The products and sys-tems listed in this cata-log are manufactured using a certified quality management system which complies with EN ISO 9001 (for the Certificate Register No. see the Appendix). The TÜV certificate is recognized in all IQ Net countries.
s
SENTRON Multifunction Power Meters
Catalog NewsLV 1 N · 10/2007
© Siemens AG 2007© Siemens AG 2007
© Siemens AG 2007© Siemens AG 2007
1 IntroductionSiemens Automation and Drives. Welcome.Sharpen your competitive edge. Totally Integrated Automation.Integrated power distribution from a single source. Totally Integrated Power.Low-Voltage Controls - The basis for progressive solutions.SIRIUS Industrial ControlsLow-Voltage Power Distribution
PG
104
, 400
11 Power Supplies4AV Non-Stabilized Power Supplies6EP Stabilized Power Supplies- SITOP- LOGO!Power
S I R
I U
S
I n d
u s
t r i
a l
C o
n t
r o l
s P
G 0
41, 1
01, 1
21, 2
30, 2
50, 5
40 ..
.
2 SystemsAS-Interface ECOFAST SystemSIRIUS Safety IntegratedPROFIBUSSIRIUS Modular System
PG
121,
131
, 200
12 Engineering softwarePlanning and Configuration with SIRIUSMotor Starter ES ECOFAST ESSIMOCODE ESSoft Starter ES
PG 0
41, 1
01, 1
21
3 Controls – Contactors and Contactor Assemblies3RT, 3TB, 3TF Contactors for Switching Motors3RA13, 3RA14, 3TD, 3TE Contactor Assemblies3RT, 3RH, 3TB, 3TC, 3TH, 3TK Contactors for Special Applications3RH, 3TH Contactor Relays · 3RT Coupling Relays3TX7, 3RS18 Coupling RelaysLZS, LZX Plug-In Relays · 3TG10 Power Relays/Miniature Contactors
L o
w -
v o
l t a
g e
P
o w
e r
D i
s t r
i b
u t i
o n
PG 1
33
13 Power Management SystemSystem Overview- Overview- More information
SENTRON Multifunction Power Meters- PAC3200 Multifunction Power Meters- PAC Profibus DP Expansion Modules
PG 0
41, 1
01
4 Controls – Solid-State Switching DevicesFor resistive loads:3RF20, 3RF21, 3RF22 Solid-State Relays3RF23, 3RF24 Solid-State Contactors · 3RF29 Function Modules
For switching motors:3RF24 Solid-State Contactors and Solid-State Reversing Contactors
PG 0
16, 1
03
14 SIVACON Power Distribution Boards, Busway Systems and Cubicle SystemsS8, 8PV and 8PT Power Distribution Boards and Motor Control Centers8PS Busbar Trunking Systems · 8MC, 8MF Cubicle Systems8MR, 8ME Cubicle Air-Conditioning ALPHA 630-DIN Floor-Mounted Distribution Boards· ALPHA FIX Terminal Blocks ALPHA 8HP Molded-Plastic Distribution SystemsComponents for 8US, 8UC, 4NC Distribution Systems
PG
041,
101
, 102
, 103
5 Protection Equipment3RV Motor Starter Protectors3RB2 Solid-State Overload Relays3RU1 Thermal Overload Relays
PG 1
03, 1
33
15 SENTRON Switching and Protection Devices for Power Distribution3WL Air Circuit Breakers
PG
041,
101
, 102
, 103
, 121
, 131
...
6 Load Feeders, Motor Starters and Soft Starters3RW Soft Starters3RA Fuseless Load Feeders3RA71 Load Feeders with Safety IntegratedAS-Interface Motor Starters and Soft StartersET 200S, ET 200pro Motor StartersET 200S Safety Motor Starter Solutions Local / PROFIsafeECOFAST Motor Starters and Soft Starters3RE Encapsulated Starters PG
101
, 102
, 103
, 113
, 131
, 250 16 SENTRON Switching and Protection Devices
for Power Distribution3VL, 3VF2 Molded Case Circuit Breakers
PG
101,
102
, 121
, 131
, 192
, 200
...
7 Monitoring and Control DevicesSIMOCODE 3UF Motor Management and Control DevicesLOGO! Logic Modules · 3RP, 3RT19 Timing Relays3UG Monitoring Relays for Electrical and Additional Measurements 3RS10, 3RS11 Temperature Monitoring Relays3RN1 Thermistor Motor Protection3TK28 Safety Relays3RS17 Interface Converters
PG 0
13, 0
46, 1
01, 1
02, 1
03, 1
13 17 SENTRON Switching and Protection Devicesfor Power Distribution3KA, 3KE, 3LD Switch Disconnectors3KL, 3KM, 3NJ6 Switch Disconnectors with Fuses3NP, 3NJ4, 3NJ5 Fuse Switch Disconnectors
PG 1
02, 1
21, 5
74
8 Detecting Devices3SE2, 3SE3, 3SE5, 3SF1 Position Switches3SF1 Hinge Switches3SE6 Magnetically Operated Switches
PG 1
33
18 Software for Power DistributionDimensioning with SIMARIS designConfiguring, Visualizing and Controlling with SIMATICConfiguring, Visualizing and Controlling with SENTRON
PG 1
01, 1
02, 1
21
9 Commanding and Signaling devices3SB2, 3SB3, 3SF5 Pushbutton Units and Indicator Lights3SE7, 3SF2 Cable-Operated Switches3SE2, 3SE3 Foot Switches8WD4 Signaling Columns8WD5 Integrated Signal Lamps
PG 0
01, 0
02, 0
03, 0
04, 0
05, 0
07 ..
.
19 BETA Low-Voltage Protection ControlsMiniature Circuit Breakers (MCBs)Residual Current Protective DevicesLow-Voltage Fuse SystemsSITOR Semiconductor Fuses SR 60 Busbar SystemsOvervoltage Protection DevicesSocket OutletsMeasuring Devices
PG
104,
114
10 TransformersSingle-Phase TransformersThree-Phase Transformers
20 AppendixStandards and approvals · Quality management · Siemens contacts · External partners · Online services · Customer support · Software licenses · Subject indexOrder number index including metal surcharges and export markings · Terms and conditions of sale and deliver
© Siemens AG 2007
4 Siemens LV 1 N · 10/2007
Explanations
General information
Selection and ordering data
Things you should know about Catalog News LV 1 N · 10/2007
Catalog News LV 1 N · 10/2007 is a news supple-ment to the LV 1 · 2008 Catalog and Technical Infor-mation LV 1 T · 2008. The section "Catalog" contains selection and order-relevant data under the topic headings "Overview", "Benefits", "Application" and "Selection and ordering data"
The topics "Design", "Function", "Configuration", "Technical specifications", "Characteristic curves", "Schematics" and "More information" can be found if required in the integrated Technical Information.
Delivery times (DT)
Preferred type
A 2 working days
B 1 week
C 3 weeks
D 6 weeks
X On request
Preferred types are available immediately from stock, i.e. are dispatched within 24 hours.
Normal quantities of the products are usually deliv-ered within the specified time following receipt of your order at our branch.
In exceptional cases, the actual delivery time may differ from that specified.
The delivery times apply up to the ramp at Siemens AG (products ready for dispatch). The transport times depend on the destination and type of shipping. The standard transport time for Germany is 1 day.
The delivery times specified here represent the state of 10/2007. They are permanently optimized. Up-to-date information can be found athttp://www.siemens.com/automation/mall.
Price units (PU)
The price unit defines the number of units, sets or meters to which the specified price and weight apply.
Packaging sizes (PS)
The packaging size defines the number, e.g. of units, sets or meters, for outer packaging.
Only the quantity defined by the packaging size or a multiple thereof can be ordered!
For multi-unit packing and reusable packaging see Appendix.
Price groups (PG)
Each product is assigned to a price group.
Weight
The defined weight in kg refers to the price unit (PU).
DimensionsAll dimensions in mm.
Order No. Export markings
Page
ECCN AL
7K7KM21 12-0BA00-3AA00 5D992B1 N 13/47KM21 12-0BA00-3AA00 N N 13/5
© Siemens AG 2007© Siemens AG 2007
Siemens LV 1 N · 10/2007
PAC3200 Multifunction Power Meters
13/2 - Overview
13/3 - Benefits
13/3 - Application
13/4 - Selection and ordering data
Expansion Modules
PAC PROFIBUS DP
13/5 - Overview
13/5 - Application
13/5 - Selection and ordering data
PAC3200 Multifunction Power Meters
13/6 - Design
13/7 - Function
13/8 - Integration
13/8 - Configuration
13/9 - Technical specifications
13/12 - Dimensional drawings
13/13 - Schematics
Expansion Modules
PAC PROFIBUS DP
13/16 - Technical specifications
13/16 - Dimensional drawings
13/16 - More information
SENTRON Multifunction Power Meters
Catalog
Technical Information
© Siemens AG 2007© Siemens AG 2007
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/2 Siemens LV 1 N · 10/2007
13
Overview
Multifunction power meters monitor your electrical installations and provide a precise picture of your power distribution and consumption
The SENTRON PAC3200 is a control panel instrument for mea-suring and indicating more than 50 power distribution variables such as voltage, current, power, electrical energy and frequency with their minimum, maximum and mean values. Its compact de-sign makes it an ideal replacement for all conventional analog in-dicating instruments.
A large, illuminated graphic display can be read even from great distances. User-friendly, intuitive operation is made possible by multilingual plain text displays in combination with four function buttons.
SENTRON PAC3200 offers numerous communication options in addition to one digital input and one digital output. An optional PROFIBUS DP expansion module is available for integration in a higher-level power management system.
The advantages of the SENTRON PAC3200 at a glance:• Three-phase control panel measuring instrument for
measuring electrical variables• Measuring more than 50 variables such as phase voltage and
phase-to-phase voltage, current, power, energy, power factor, frequency, etc.
• High measuring accuracy for electrical energy; Class 0.5S according to IEC 62053-22
• Can be used for single-phase measurements as well as for multiphase measurements in 3 and 4-conductor networks
• Can be connected directly to three-phase industrial networks up to 690/400 V (CATIII)
• Measuring higher voltages using a voltage transformer; adjustable transformer ratio
• For x/1A and x/5A current transformers; adjustable transformer ratio and current direction
• Multi-range power supply unit (95 ... 240 V AC ±10% / 45 … 65 Hz and 140 ... 340 V DC ±10%)
• Slot for expansion modules such as the SENTRON PAC PROFIBUS DP communication module
• Small space requirement thanks to compact design (96 mm x 96 mm, mounting depth 51 mm or 73 mm with module)
• Large, graphic LCD display with intuitive user operation using function buttons
• IP65 assured by standard sealing• Multifunctional digital input, for example for detecting count-
ing pulses or for monitoring the status of switching devices• Multifunctional digital output, for example for emitting active
or reactive power pulses (S0) or for indicating limit value violations
• Monitoring up to 6 limit values; connecting the limit values with logical AND / OR operations
• Measuring period averages for active and reactive power with minimum and maximum value
• Operating hours meter for monitoring the load running time• Integrated Ethernet interface (for future use)
© Siemens AG 2007© Siemens AG 2007
13
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/3Siemens LV 1 N · 10/2007
Measurement functionsThe SENTRON PAC3200 measures the following variables:
1) Can be called up only through communication. The power averages (power count values), including minimum and maximum values, are transmitted for a selectable measurement period. The measurement
period can be selected in the range 1 … 60 min; the default setting is 15 min.
2) The values for on-peak and off-peak are shown on the display.
Benefits
• Thanks to the wide range of functions, only one device variant is required for different measuring tasks – this saves storage costs and procurement costs.
• Easy and quick mounting saves installation costs.• Metering input connections to networks up to 690 V without a
voltage transformer saves space in the control cabinet and costs (transformer costs, transformer mounting and installa-tion costs).
• Comprehensive and precise power measurements form the basis for identifying savings potential in the system.
• The many different measuring and monitoring functions of the SENTRON PAC3200 contribute indirectly to a higher level of availability because faults are detected early on in the pro-cess.
• Easy integration in automation systems or powermanagement systems, for example SIMATIC powercontrol or SIMATIC PCS 7, through the optional PROFIBUS interface saves time and implementation costs.
• With its technical configuration and various approvals and certifications, the SENTRON PAC3200 can be used world-wide.
• A small mounting depth of 51 mm saves space.• A large, illuminated graphic display guarantees good reading
even in poor light conditions and opens up a wider application area for the device.
• Intuitive operation enables quick initial start-up and easy daily operation, saving both time and money.
Application
Three-phase multifunction power meters are used to measure and indicate all relevant network parameters of an electrical in-stallation and they monitor these parameters permanently.
Use
Wherever power has to be distributed, be it in industrial or infrastructural buildings, the SENTRON PAC3200 supplies important information to the building services system or the power controlling system.
The many different communication options offered by the SENTRON PAC3200 make it an indispensable supplier of data for power management and for plant and building automation.
Industries
Power distribution systems for the power supply are needed in all industries. SENTRON PAC3200 is used accordingly in all sec-tors where power consumption and electrical parameters are to be measured.
Variable Display range L1/L1-2 L2/L2-3 L3/L3-1 Total Minimum value
Mean value
Maximum value
Current 0 A ………120 kA
Voltage L-N 0 V …….. 700 kV
Voltage L-L 0 V …..… 1200 kV
Frequency 44.00 … 67.00 Hz
Active power per phaseinput "+" / output "-"
0 W ….. 100 GW
Reactive power per phasepos./neg. or ind./cap.
0 var … 100 Gvar
Apparent power per phase 0 VA … 100 GVA
Active power totalinput "+" / output "-"
0 W … 100 GW 1)
Reactive power totalpos./neg. or ind./cap.
0 var … 100 Gvar 1)
Apparent power total 0 VA … 100 GVA
Power factor per phase 0 …1
Power factor total 0 …1
Active energy totalinput "+" / output "-"
0 Wh … 1000 GWh 2)
Reactive energy totalpos./neg. or ind./cap.
0 varh … 100 Gvarh 2)
Apparent energy total 0 VAh … 100 GVAh 2)
THD voltage per phase 0 … 100 %
THD current per phase 0 … 100 %
Voltage unbalance 0 … 100 %
Current unbalance 0 … 100 %
Operating hours 0 h … 300 years
Universal counter 0 … 999,999,999 pulses
© Siemens AG 2007© Siemens AG 2007
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/4 Siemens LV 1 N · 10/2007
13
Selection and ordering data
Note:
Suitable current transformers can be found • in Catalog LV 1 2008, section "SIVACON Power Distribution
Boards, Busway and Cubicle Systems" -->"Components for 8US, 8UC, 4NC Distribution Systems, 4NC Current Transform-ers for Measuring Purposes“"
• in the A&D Mall, section "Low-Voltage Controls" --> "Low-Volt-age Power Distribution" --> "SIVACON Power Distribution Boards, Busway and Cubicle Systems" -->"Components for 8US, 8UC, 4NC Distribution Systems" --> "4NC Current Trans-formers for Measuring Purposes".
Version DT Order No. Price
per PUPU(UNIT, SET, M)
PS* PG Weight per PU approx.
kg
7KM2112-0BA00-3AA0
SENTRON PAC3200
Control panel instrument 96 mm x 96 mmScrew terminals for connecting current and voltageUC: 95…240 V AC / 140…340 V DCUe: 3 AC 690/400 VIe: /1 A or /5 A
A 7KM2112-0BA00-3AA0 1 1 unit 133 0.3
* You can order this quantity or a multiple thereof.
© Siemens AG 2007© Siemens AG 2007
13
SENTRON Multifunction Power Meters
Expansion modulesPAC Profibus DP
13/5Siemens LV 1 N · 10/2007
Overview
The PAC PROFIBUS DP expansion module has the following features:• PROFIBUS DP plug-in communication module for
SENTRON PAC3200• Parameterizable from the front of the device• Easy integration using GSD file, with free choice of the
measurement variables to be transmitted• Plug and play• All baud rates from 9.6 Kbit/s to 12 Mbit/s are supported• Connection through 9-pole Sub-D connector according to
IEC 61158• No external auxiliary power necessary• Status indication by LED on the module
Application
The SENTRON PAC PROFIBUS DP communication module is plugged onto the rear of the PAC3200 multifunction power meters. The device identifies the module automatically and pre-sents the parameters of relevance for this module for selection in the parameterization menu.
All measurement variables supplied by the PAC3200 areselected and cyclically transmitted by means of the GSD file.
The state of the module is indicated by an LED.
Selection and ordering data
Version DT Order No. Price per PU
PU(UNIT, SET, M)
PS* PG Weight per PU approx.
kg
7KM9300-0AB00-0AA0
PAC PROFIBUS DP
Expansion module for SENTRON PAC3200
A 7KM9300-0AB00-0AA0 1 1 unit 133 0.045
* You can order this quantity or a multiple thereof.
© Siemens AG 2007© Siemens AG 2007
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/6 Siemens LV 1 N · 10/2007
13
Design
Enclosures
SENTRON PAC3200 comes with a plastic enclosure for installa-tion in control panels. It is fastened by one holder on the right side of the device and one on the left side.
$ Opening in the device for attaching the mounting holder% Device holder with retention lugs
For mounting the SENTRON PAC3200, it is inserted from the front through the square cut-out in the control cabinet door and secured with the supplied holders.
From the front, i.e. in the installed state, the device complies with Safety Class II with degree of protection IP65.
The following picture shows the rear view of SENTRON PAC3200, the top view of the PAC PROFIBUS DP expansion module, and how the two parts are joined together.
Rear view of the SENTRON PAC3200 and top view of the PAC PROFIBUS DP expansion module$ Device and module enclosure% Fixing screws and related holes in the enclosure& PROFIBUS connector( Fixtures for the PROFIBUS connector
Operating and indicating elements
The following picture shows the SENTRON PAC3200 from the front, divided into the function blocks provided for operation and monitoring, including a description.
Front of the SENTRON PAC 3200
The device is operated using 4 function buttons, which corre-spond to the 4 text fields situated above them. The buttons are each assigned with several functions; their function at any time depends on the menu then displayed. Which function a button has in the respective menu is indicated by the text in the related display.
2
NSE0_01953
1
SN62217-B3x222x
0,5 Nm
NSE0_01952
NS
E_0
1947
The header bar shows in plain text which measurement values are presented in the current display. For easier navigation, the menu number of the display is shown on the far right.
The measured values with phase identiferand unit of measurement are shown in the middle of the display.
The scrollbar and the menu number in the display header togetherindicate in which display or parameter menuyou are, thus enabling fast and selective navigation.
Four function buttons with context-sensitive descriptions for operating the device.
© Siemens AG 2007© Siemens AG 2007
13
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/7Siemens LV 1 N · 10/2007
Function
Precise measurement of variables
With its high accuracy, the SENTRON PAC3200 meets the in-creasing demand for precise power measurement. It satisfies the accuracy requirements of Class 0.5S according to IEC 62053-22 for solid-state active consumption meters.
Transparency in power matters
Altogether 10 energy readings for active, reactive and apparent energy monitor the power consumption in the system separately for on-peak and off-peak, for both imported power and exported power.
This makes the SENTRON PAC3200 the optimum choice of data supplier for a higher-level power management system.Integrated in such a system it enables the user to record hisinstallation's load profile. For this purpose the SENTRON PAC3200 also supplies the re-quired power averages for active and reactive power.
Plain-text displays
A large, full graphic display enables easy reading even from great distances. To make sure that this is also the case in poor light conditions, the background lighting can be individually adapted to the actual requirements.
Operation, also multilingual
A special highlight is the intuitive user operation. Operation in German and English is quick to learn using the four function but-tons together with multilingual plain text displays. Direct naviga-tion is available in addition for the experienced user, who can thus call up the menus of choice even more quickly.
Mounting and start-up in the shortest time possible
With its ingenious mounting method, the SENTRON PAC3200 is quick and easy to install using combination latching holders.
The pair of combination holders performs two functions:• Thanks to the latching mechanism, the fitter can fasten the
device in the control panel quickly and without the use of any tools.
• If greater protection is required, the four screws of the latching holder can be used to increase its contact pressure evenly on all sides so that the control panel cut-out is cleanly sealed by the integrally molded gasket, which is a standard feature. The often bothersome and time-consuming insertion of an acces-sory gasket is a thing of the past.
As the result of the easy-to-use combination holders and the small mounting depth of only 51 mm it is easy to mount several devices side by side.
Powerful communication
The SENTRON PAC3200 comes as standard with one slot, for example for accommodating a PROFIBUS DP expansion mod-ule. The device is easy to integrate therefore in every power management system or every PROFIBUS environment. Integra-tion in PROFIBUS takes place using a standardized text file called the GSD (Geräte-Stammdaten-Datei). This GSD file is read into the master with the help of the PROFIBUS configuration tool. The master thus receives the slave-specific framework of the SENTRON PAC3200 and can start cyclic operation immedi-ately.
Multifunctional digital input and output
The SENTRON PAC3200 is equipped with one digital input and one digital output, to each of which various functions can be as-signed.
Functions of the digital input:• Counting input for energy pulses (kWh, kvarh) from third-party
devices• Status monitoring of a switching device• Rate switchover between on-peak and off-peak• Signal input for synchronization of the measurement period
Functions of the digital output:• Impulse output for sending energy pulses
(kWh, kvarh)• Alarm output for signaling limit value violations• SENTRON PAC3200 operating state indicator• Phase sequence indicator• Switching output for remote control using system software
With its wide range of functions, the SENTRON PAC3200 can be used in all applications.
Monitoring of measurement variables forlimit value violations
The SENTRON PAC3200 can monitor up to 6 measurement vari-ables for violation of an adjustable upper or lower limit value. The following variables can be monitored: voltage, current, power, power factor, THD U/I, frequency or unbalance of voltage and current
The following can be assigned to each limit value:• A measurement variable:
UL-N, UL-L, IL, PL, QL, SL, LFL, THD-UL/IL for all 3 phases and UL-N, mean value, UL-L, mean value, IL, mean value, Stot, Ptot, Qtot, LFtot, frequency, unbalance U / I
• The monitoring mode (overshooting or undershooting)• A limit value• A delay time and • A hysteresis
In addition the limit values can be interconnected by an AND / OR logic function. Like the individual limit values, the result of the logic operation can also trigger certain actions.
It is possible to select the action which will be triggered by vio-lation of a limit value. For example, a signal can be sent through the digital output or the communication interface. The integrated universal counter can be used to total the number of limit value violations. Whether a limit value has been violated is indicated on the device.
Monitoring of voltage and current for unbalance
The device measures, among other things, the unbalance of voltage and current in the network. Now that a limit value can also be assigned to these two parameters, problems due tounbalanced loads in the installation can be detected early and avoided.
Operating hours meter
An important service function is performed by the integrated op-erating hours counter, which can be used to monitor e.g. pumps, motors or machines. The counter measures the running time of a connected load, helping to ensure that important maintenance intervals are observed. The count can be read out and evaluated by a PC. A higher-level power management system is thus able to generate a suitable maintenance message.
© Siemens AG 2007© Siemens AG 2007
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/8 Siemens LV 1 N · 10/2007
13
Universal use
The SENTRON PAC3200 can be used for measuring in two-, three- and four-conductor networks. It is capable of measuring in three phases as well as in one and two phases.
Thanks to its large measuring voltage range, the device can be directly connected in every low-voltage network up to a rated system voltage of 690 V (UL-L). Higher voltages can be mea-sured using voltage transformers.
For measuring currents, it is possible to use both x/1A and x/5A current transformers. Transformer ratios and current direction can be programmed on the device for adaptation to local condi-tions.
Protection against unauthorized access
The SENTRON PAC3200 comes with integrated password pro-tection so that the power and parameter data are safe from un-authorized access. Changes to the parameterization can be traced using a configuration counter which can be read out through an interface.
Integration
Using the standard PROFIBUS interface, it is possible to inte-grate the SENTRON PAC3200 in every I&C system or every SIMATIC S7 environment.
When the SENTRON PAC3200 is fully integrated in a power man-agement system, e.g. SIMATIC powercontrol or SIMATIC PCS 7 powerrate, it monitors the power consumption and also helps to monitor the operating state of the installation. Measured values, limit value violations, operating hours of a connected load or power flows are supplied by the device quickly and reliably.
Integration of the SENTRON PAC3200 in SIMATIC powercontrol
Configuration
The SENTRON PAC3200 is designed for user-friendly configur-ing directly on the device. All menus are displayed in plain text and are largely self-explanatory. Thanks to the uniform and sim-ple programming scheme, configuring is straightforward even without a manual.
Configuring interface of the SENTRON PAC3200
HMI (ActiveX)
Device drivers
S7 SW content
Archive
DatabaseServerEngineering
© Siemens AG 2007© Siemens AG 2007
13
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/9Siemens LV 1 N · 10/2007
Technical specifications
Measurement
Networks Only for alternating voltage systems
1-, 2- or 3-phase
3- or 4-conductor networks
Same or any load
4 quadrants (import and export)
Frequency of fundamental wave Hz 50/60
Signal detectionFor power, current and voltage Zero blind measurement
Curve shape Sinusoidal or distortedMeasuring inputs for voltageRated voltage 3 AC Ue (max.)
Phase to neutral V 400
Phase to phase V 690
Operating range voltage
Phase to neutral V 80 ... 480
Phase to phase V 139 ... 831
Measuring category CAT III
Input resistance
Phase to neutral MΩ 1.05
Power consumption
Per phase MW 220
Measuring of voltages > 690 V AC using voltage transformerPrimary transformer ratio
Adjustable V 1 ... 999 999
Secondary transformer ratio
Adjustable V 1 ... 690Measuring inputs for currentRated current 3 AC Ie per phase
Adjustable A 1 or 5
Operating range current per phase
With setting 1 A A 0.01 ... 1.2
With setting 5 A A 0.05 ... 6
Permanent load capacity
Permanent A 10
Surge overload capability
For 1 second A 100
Power consumption
Per phase mVA 4 at 1A, 115 at 5A
Measuring category CAT III
Zero point suppression
Adjustable % 0 ... 10
Measuring of currents > AC 5 A or 1 A using current transformerPrimary transformer ratio
Adjustable A 1 ... 99 999
Secondary transformer ratio
Adjustable A 1 or 5Supply voltageMulti-range power supply unit AC/DC
Operating range
AC V 86 ... 264
DC V 126 ... 374
Rated frequency
AC Hz 50/60
Power consumption
Without optional expansion module VA 6
Including optional expansion module VA 8
Overvoltage category CAT III
© Siemens AG 2007© Siemens AG 2007
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/10 Siemens LV 1 N · 10/2007
13
Fault limits
Voltage % ±0.3
Current % ±0.2
Rating % ±0.5
Frequency % ±0.05
Power factor % ±0.5
Active energy Class 0.5S according to IEC 62053-22:2003-01
Reactive energy Class 2 according to IEC 62053-23:2003-01
When taking measurements on external current or voltage transformers, the accuracy of the measurements depends on the quality of the transformers.Digital inputNumber 1
Rated value V DC 24
Max. input voltage V DC 30
Input threshold signal "1" V DC > 11
Input current signal "1" DC mA 7
Digital outputNumber 1
Required voltage V DC 12 ... 24
Max. switched output voltage V DC 30
Output current signal "0" DC mA Max. 0.2
Output current signal "1"
Typical DC mA 10 ... 27 Permanent DC mA 100Short-time overload for max. 100 ms DC mA 300Resistive load DC mA 100Switching frequency Hz 17
Short-circuit protection Yes
CommunicationEthernet RJ45 socket for future use
Interface integrated MBit/s 10PROFIBUS DP
Using expansion module V0Transmission rate max. MBit/s 12Measuring values to be transmitted Definable using GSD fileIndication and operationDisplay type LCD, full graphic
Displays Alphanumeric and text
Resolution Dots 128 x 96
Size mm 72 x 54
Contrast Adjustable
Display Display invertible, pos/neg mode
Background lighting
Lighting intensity AdjustableLighting intensity dimmed AdjustableDimming time min 0 ... 99Languages German, English
Operation
Function buttons 4Description of buttons in display Dependent on current display menuConnection elements and terminals for measuring inputsMeasuring inputs and supply voltage Screw terminals
Conductor cross-sections Solid mm2 1 x 0.5 ... 41 x AWG 20 ... 12
mm2 2 x 0.5 ... 2.52 x AWG 20 ... 14
Finely stranded with end sleeve mm2 1 x 0.5 ... 2.51 x AWG 20 … 12
mm2 2 x 0.5 ... 1.52 x AWG 20 … 16
Tool size ± screw, Pozidriv 2
© Siemens AG 2007© Siemens AG 2007
13
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/11Siemens LV 1 N · 10/2007
Connection elements and terminals for measuring inputs
Digital output, digital input Screw terminals
Conductor cross-sections Solid mm2 1 x 0.2 … 2.5mm2 2 x 0.2 … 1.0
1 x AWG 24 ... 12Conductor cross-sections Finely stranded with end sleeve mm2 1 x 0.25 … 2.5
mm2 2 x 0.25 … 1.01 x AWG 24 … 12
Tool size ± screw, Pozidriv 1Dimensions and weightsEnclosure for installing in control panel According to IEC61554
Enclosure dimensions (W x H x D)Without expansion module mm 96 x 96 x 56With expansion module mm 96 x 96 x 78
Mounting depthWithout expansion module mm 51With expansion module mm 73
Control panel thickness mm 0.5 … 4
WeightWithout expansion module Approx. g 300With expansion module Approx. g 345
Degree of protection and safety classSafety class according to EN 61010-1
From the front when installed II
Degree of protection according to EN 60529
Mountable on front IP65
Rear IP20Ambient conditionsTemperature range
Operating temperature °C -5 °C … + 55Storage and transport temperature °C -25 °C … + 70Relative air humidity
At 25 °C without condensation % 95Operating altitude
Above sea level up to max. m 2000Degree of pollution 2
SafetyPassword protection 4-digit numeric code
Safety requirements
Device test according to the following standards IEC 61010-1:2001 (2nd Ed.) with Corr.1EN 61010-1-1:2001 (2nd Ed.)EN 61010-1:2002 with Corr.1
Electromagnetic compatibilityEmitted interference IEC 61000 6-4 Group 1;
Class A / CISPR11 Group 1; Class A FCC Part 15 Subpart B;Class A
Enclosure interference immunity
Electrostatic discharge IEC 61000-4-2:2001-04Electromagnetic fields IEC 61000-4-3:2006-02Line-frequency magnetic fields IEC 61000-4-8:2001-03Measuring and supply voltage
Voltage dips IEC 61000-4-11:2004-03Rapid transients EN 61000-4-4:2005-07Surge voltages EN 61000-4-5:2001-12Line-conducted RF signals EN 61000-4-6:2001-12Inputs and outputs, interfaces
Rapid transients IEC 61000-4-4:2004-07Surge voltages IEC 61000-4-5:2005-11Line-conducted RF interference fields EN 61000-4-6:2001-12Mechanical dynamic stressVibratory load (conditions of use/transport) According to IEC 60068 Part 2-6:1995-03 / EN 60068 Part 2-6:1996-05
Seismic stress According to IEC 60068 Part 3-3:1991-02 / EN 60068 Part 3-3:1993-09
Shock stress According to IEC 60068 Part 2-27:1987 / EN 60068 Part 2-27:1995-03
Bumping, resistance According to IEC 60068 Part 2-27:1987 / EN 60068 Part 2-27:1995-03
Continuous bumping According to IEC 60068-2-29:1987 / EN 60068 Part 2-29:1995-03
Mechanical strength Against surges and shocks According to IEC 60068-2-75:1997-08
© Siemens AG 2007© Siemens AG 2007
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/12 Siemens LV 1 N · 10/2007
13
Dimensional drawings
Dimensions of multifunction power meter
Control panel cut-out Control panel cut-out, lateral
Mounting clearances
96
F1 F2 F3 F4
96 91
51
NS
E0_
0195
5
73
NS
E0_
0195
6
92+0
,8
92+0,8
max. 4 mm
7070
NS
E_0
1957
F1 F2 F3 F4F1 F2 F3 F4
NS
E_0
1958
135
© Siemens AG 2007© Siemens AG 2007
13
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/13Siemens LV 1 N · 10/2007
Schematics
Connection examples
Connection example 1:
Three-phase measurement, four conductors, asymmetric load, without voltage transformer, with three current transformers
Connection example 2:
Three-phase measurement, four conductors, asymmetric load, with voltage transformer, with three current transformers
Connection example 3:
Three-phase measurement, four conductors, symmetric load, without voltage transformer, with one current transformer
* Fuses must be provided by the user.
Connection example 4:
Three-phase measurement, four conductors, symmetric load, with voltage transformer, with one current transformer
Connection example 5:
Three-phase measurement, three conductors, asymmetric load, without voltage transformer, with three current transformers
Connection example 6:
Three-phase measurement, three conductors, asymmetric load, with voltage transformer, with three current transformers
** Connection of the supply voltage
© Siemens AG 2007© Siemens AG 2007
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/14 Siemens LV 1 N · 10/2007
13
Connection example 7:
Three-phase measurement, three conductors, asymmetric load, without voltage transformer, with two current transformers
Connection example 8:
Three-phase measurement, three conductors, asymmetric load, with voltage transformer, with two current transformers
Connection example 9:
Three-phase measurement, three conductors, symmetric load, without voltage transformer, with one current transformer
* Fuses must be provided by the user.
Connection example 10:
Three-phase measurement, three conductors, symmetric load, with voltage transformer, with one current transformer
Connection example 11:
Two-phase measurement, three conductors, asymmetric load, without voltage transformer, with two current transformers
Connection example 12:
Single-phase measurement, two conductors, without voltage transformer, with one current transformer
** Connection of the supply voltage
© Siemens AG 2007© Siemens AG 2007
13
SENTRON Multifunction Power Meters
PAC3200 multifunction power meters
13/15Siemens LV 1 N · 10/2007
Connection example 13:
Three-phase measurement, four conductors, asymmetric load, with voltage transformer, with three current transformers
* Fuses must be provided by the user.
** Connection of the supply voltage
Connection graphics
Terminals$ Digital inputs and outputs, functional ground% Slot not assigned& Supply voltage L/+, N/-( Measuring inputs voltage V1, V2, V3, VN) Measuring inputs current IL1, IL2, IL3* Slot for optional expansion modules+ Optional expansion module, not included in the scope of supply, Ethernet interface
No. Terminal Function$ IL1 k Phase current, IL1, input% IL1 l Phase current, IL1, output& IL2 k Phase current, IL2, input( IL2 l Phase current, IL2, output) IL3 k Phase current, IL3, input* IL3 l Phase current, IL3, output+ V1 Phase voltage UL1, V2 Phase voltage UL2- V3 Phase voltage UL3. VN Neutral conductor UN/ L/+ AC: Connection: Conductor (phase voltage) DC: Connection: +0 N/- AC: Connection: Neutral conductor
DC: Connection: -1 Functional ground2 DI - Digital input -3 DI + Digital input +4 DO- Digital output -5 DO+ Digital output +
1
2
345
6
7
8
1
NS
E_0
1950
1 2 3 4 5 6 7 8 11 12
13 14 15 16 17
9 10
NS
E_0
1951
© Siemens AG 2007© Siemens AG 2007
SENTRON Multifunction Power Meters
Expansion modules PAC Profibus DP
13/16 Siemens LV 1 N · 10/2007
13
Technical specifications
Dimensional drawings
Dimensions of expansion module at the side and from the front
Dimensions of the expansion module connector
More information
More information can be found on the Internet at
www.siemens.com/powermanagementsystem
CommunicationPROFIBUS DP
Using expansion module V0Transmission rate max. MBit/s 12Measuring values to be transmitted Definable using GSD fileDimensions and weightsEnclosure dimensions (W x H x D)
Module enclosure for plugging onto the PAC3200 mm 43 x 63 x 22
Weight Approx. g 45
Degree of protectionDegree of protection according to EN 60529 IP20
Ambient conditionsTemperature range
Operating temperature °C -5 °C … + 55Storage and transport temperature °C -25 °C … + 70Relative air humidity
At 25 °C without condensation % 95Operating altitude
Above sea level up to max. m 2000Degree of pollution 2
22
NS
E_0
1948
43
636
NS
E_0
1949
7,5
6,44
© Siemens AG 2007© Siemens AG 2007
Appendix
Conditions of sale and deliveryExport regulations
8/2
Terms and Conditions of Sale and Delivery
By using this catalog you can acquire hardware and software products described therein from Siemens AG subject to the fol-lowing terms. Please note! The scope, the quality and the condi-tions for supplies and services, including software products, by any Siemens entity having a registered office outside of Ger-many, shall be subject exclusively to the General Terms and Conditions of the respective Siemens entity. The following terms apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in GermanyThe “General Terms of Payment” as well as the “General Condi-tions for the Supply of Products and Services of the Electrical and Electronics Industry” shall apply.For software products, the “General License Conditions for Soft-ware Products for Automation and Drives for Customers with a Seat or registered Office in Germany” shall apply.
For customers with a seat or registered office outside of GermanyThe “General Terms of Payment” as well as the “General Condi-tions for Supplies of Siemens, Automation and Drives for Cus-tomers with a Seat or registered Office outside of Germany” shall apply.For software products, the “General License Conditions for Soft-ware Products for Automation and Drives for Customers with a Seat or registered Office outside of Germany” shall apply.
GeneralThe dimensions are in mm. In Germany, according to the Ger-man law on units in measuring technology, data in inches only apply to devices for export. Illustrations are not binding.Insofar as there are no remarks on the corresponding pages, - especially with regard to data, dimensions and weights given - these are subject to change without prior notice.The prices are in € (Euro) ex works, exclusive packaging.The sales tax (value added tax) is not included in the prices. It shall be debited separately at the respective rate according to the applicable legal regulations.Prices are subject to change without prior notice. We will debit the prices valid at the time of delivery.Surcharges will be added to the prices of products that contain silver, copper, aluminum, lead and/or gold if the respective basic official prices for these metals are exceeded. These surcharges will be determined based on the official price and the metal fac-tor of the respective product.The surcharge will be calculated on the basis of the official price on the day prior to receipt of the order or prior to the release order.The metal factor determines the official price as of which the metal surcharges are charged and the calculation method used. The metal factor, provided it is relevant, is included with the price information of the respective products.
An exact explanation of the metal factor and the text of the Comprehensive Terms and Conditions of Sale and Delivery are available free of charge from your local Siemens business office under the following Order Nos.:• 6ZB5310-0KR30-0BA1
(for customers based in Germany)• 6ZB5310-0KS53-0BA1
(for customers based outside Germany)or download them from the Internethttp://www.siemens.com/automation/mall (Germany: A&D Mall Online-Help System)
Export regulations
The products listed in this catalog / price list may be subject to European / German and/or US export regulations.Therefore, any export requiring a license is subject to approval by the competent authorities.According to current provisions, the following export regulations must be observed with respect to the products featured in this catalog / price list:
Even without a label or with an “AL: N” or “ECCN: N”, authoriza-tion may be required due to the final destination and purpose for which the goods are to be used. The deciding factors are the AL or ECCN export authorization indicated on order confirmations, delivery notes and invoices.Errors excepted and subject to change without prior notice.
A&D/VuL_ohne MZ/En 05.09.06
AL Number of the German Export ListProducts marked other than “N” require an export license. In the case of software products, the export des-ignations of the relevant data medium must also be generally adhered to.Goods labeled with an “AL“ not equal to “N” are subject to a European or German export authori-zation when being exported out of the EU.
ECCN Export Control Classification NumberProducts marked other than “N” are subject to a reexport license to specific countries.In the case of software products, the exportdesignations of the relevant data medium must also be generally adhered to.Goods labeled with an “ECCN“ not equal to “N” are subject to a US re-export authorization.
© Siemens AG 2007© Siemens AG 2007
Kopie von lv1_news_200710_sentron_multifunktionsgeräte_de.FH10 Tue Nov 20 16:02:49 2007 Seite 1
!
!"
"#
"!#$%&'() *)#$+,--./0.120203".4
5!5!!
© Siemens AG 2007© Siemens AG 2007