एसजेवीएन लिलिटेड - sjvn limited · hacksaw frame for blade size 300mm...
TRANSCRIPT
-
Registered &
Corporate
Office
SJVN Corporate office complex, Shanan
Shimla, Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17
FAX: 011- 41659204/14
( )
(A Mini Ratna and Schedule A Company)
(6X250MW ) , , , . 172201
. 01782-275236,275459,275106, 01782-234049, 275106, http://www.sjvn.nic.in
(GST No.) 02AAICS1307F1ZY (CIN No.) L40101HP1988GOI008409
No. SJVN/NJHPS/ P&C (O&M) /PPR-1627- Date:
NOTICE INVITING QUOTATION The open tender enquiries under one part bid system through e-tendering are herewith invited for Procurement
of Consumables required for Annual Maintenance of G.Ts/BVH/ UABs and Ventilation Blowers of
NJHPS, SJVN Ltd. Jhakri as given below:-
DESCRIPTION
Earnest Money
In (Rs)
Last Date & Time of Submission of filled
in bids and Opening
Procurement of Consumables required
for Annual Maintenance of G.Ts/BVH/
UABs and Ventilation Blowers of
NJHPS, SJVN Ltd. Jhakri (Detailed
Technical specification as per Annexure-
A)
Rs 13,000/- (Rupees Thirteen
Thousand only)
Last date & time of the availability/ downloading of the bid documents
31.10.2017 at 12:00 Hrs. Last date of bid submission 01.11.2017
at 13:00 Hrs.
Bid opening date 01.11.2017 at 14:00 Hrs.
Note:
1. The detailed NIT along with Terms and Conditions shall be available at www.sjvn.nic.in &
www.eprocure.gov.in w.e.f. 12.10.2017.
2. The complete NIT along with price schedules shall be made available on https://sjvn.abcprocure.com.
w.e.f. 12.10.2017.
3. The bids are to be submitted electronically through e-tendering at https://sjvn.abcprocure.com.
, , -172201
-
Registered &
Corporate
Office
SJVN Corporate office complex, Shanan
Shimla, Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17
FAX: 011- 41659204/14
-
Page 1 of 7
TECHNICAL SPECIFICATIONS ANNEXURE-A
Sr. No.
DESCRIPTION OF MATERIAL
Unit PREFERABLE MAKE QUAN-TITY
SPECS.
1 KNITTED GLOVES WITH OUTSIDE COATING
Pair Any reputed make 75 With Rubber
coating on one side
2 SURGICAL GLOVES Pcs Any reputed make 60 6.5 No.
3 TURPENTINE OIL Ltr ASIAN/BERGER/SHALIMAR/NEROLAC
40
4 SMOKE GREY PAINT Ltr. ASIAN/BERGER/SHALIMAR/NEROLAC
50 1 Ltr. Pack
5 WHITE PAINT Ltr. ASIAN/BERGER/SHALIMAR/NEROLAC
20 1 Ltr. Pack
6 P.O. RED PAINT Ltr. ASIAN/BERGER/SHALIMAR/NEROLAC
12 1 Ltr. Pack
7 ALUMINIUM PAINT Ltr. ASIAN/BERGER/SHALIMAR/NEROLAC
10 1 Ltr. Pack
8 M Seal Kg PIDILITE 2.0 Min 100gm Pack
9 ALUMINIUM LUGS 16 SQ MM ( PIN TYPE)
Pcs. JAINSON/DOWEL/COMET 200
10 16 SQ MM ALUMINIUM LUGS (HOLE TYPE)
Pcs JAINSON/DOWEL/COMET 200
11 ALUMINIUM THIMBLE PIN TYPE 35 SQMM
Pcs. JAINSON/DOWEL/COMET 200
12 COPPER LUGS 1.5 SQ MM , PIN TYPE
PCS JAINSON/DOWEL/COMET
100 WITH RUBBER
SLEEVE
-
Page 2 of 7
Sr. No.
DESCRIPTION OF MATERIAL
UOM PREFERABLE MAKE QUAN-TITY
SPECS.
13 COPPER LUGS 2.5 SQ MM , HOLE TYPE
PCS JAINSON/DOWEL/COMET
200 WITH RUBBER
SLEEVE
14 PVC TAPE (Minimum Length of 1 Roll is 7.5 Mtr)
ROLL ANCHOR/STEELGRIP/DENSO
120
15 H T TAPE 20MM (Minimum Length of 1 Piece is 10 Mtr)
PCS. DENSO/STEELGRIP/SCOTCH 15
16 EMPIRE TAPE 25MtrX50mm) FOR ELECTRIC PARTS
Roll CAUTION/SWABS INDIA/PARA TAPE
25 Length = 25 mtr
17 COPPER LUGS SNAP TYPE 2.5 MM SQR.
Pcs. JAINSON/DOWEL/COMET 200 WITH RUBBER
SLEEVE
18 COPPER LUGS 4 MM SQR SNAP TYPE.
Pcs. JAINSON/DOWEL/COMET 200
19 COPPER LUGS 25 SQ MM , PIN TYPE
PCS JAINSON/DOWEL/COMET 125
20 COPPER LUGS 4 SQ MM HOLE TYPE
PCS JAINSON/DOWEL/COMET
150
21 COPPER LUGS 10 SQ MM , HOLE TYPE
Pcs. JAINSON/DOWEL/COMET 225
22 COPPER LUGS 10 SQ MM , PIN TYPE
Pcs. JAINSON/DOWEL/COMET 125
23 COPPER THIMBLE 25 SQ MM ( HOLE TYPE)
Pcs. JAINSON/DOWEL/COMET 125
24 35 SQ MM COPPER LUGS / THIMBLE ( HOLE TYPE)
Pcs. JAINSON/DOWEL/COMET 100
25 COPPER LUGS 2.5 SQMM FLAT TYPE
Pcs.
JAINSON/DOWEL/COMET 100
With Rubber sleeve
-
Page 3 of 7
Sr. No.
DESCRIPTION OF MATERIAL
UOM PREFERABLE MAKE QUAN-TITY
SPECS.
26 COPPER THIMBLE HOLE TYPE 50 SQ MM
Pcs. JAINSON/DOWEL/COMET 50
27 GREASE GUN CAP-5kg Pcs. Eastman/GB Tool/Tata/JCB/Equivalent
2
28
COPPER CABLE flexible 3.5CoreX10mm 2, PVC INSULATED 1100V GRADE
Mtr. Havells /Torex /Delton 150
29
NITRILE RUBBER CORD
70 DEGREE SHORE , SIZE
8.5 MM DIA MTR Indian rubber/Jyoti/Viton 200
As per Sample ( Sample will be provided by Indenting Department )
30
RUBBER SHEET- 2MM
THICK
KG Indian rubber/Jyoti/Viton
200 NITRILE RUBBER
SHEET MIN WIDTH 1 MTR.
31 MULTIMETER LEADS PAIR Any reputed make 05
RED AND BLACK
32 PVC FLEXIBLE PIPE1 Mtr. Any reputed make 50 PVC/RUBBER HOSE
PIPE FOR COMPRESSED AIR
-
Page 4 of 7
Sr. No.
DESCRIPTION OF MATERIAL
UOM PREFERABLE MAKE QUAN-TITY
SPECS.
33 HACKSAW FRAME FOR BLADE SIZE 300MM
Pcs. MIRANDA/ITL/HSS/PATANI/JK/T
APARIA 04
34 INDUSTRIAL OVEN FOR SILLICA GEL REACTIVATION
Pcs
ESSAB/KENTON/RAMA 01
35 PAINT BRUSH 2 Pcs.
SAINIK/555/SHORTCUT/PRO 10
36 PAINT BRUSHES 3 INCH Pcs.
SAINIK/555/SHORTCUT/PRO 10
37 MULTI PURPOSE GREASE
KG BP/IOC/VEEDOL 80
38 MALE/FEMALE BRONZE GATE VALVE
PCS Zasco/Zoloto/Febi 15
(MALE CONNECTION AT ONE END AND FEMALE
CONNECTION AT ANOTHER END)
39 EYE BOLT M16 Pcs.
IWRC/ CROSBY / TE-CO/
GRAINGER CHOICE 04
-
Page 5 of 7
Sr. No.
DESCRIPTION OF MATERIAL
UOM PREFERABLE MAKE QUAN-TITY
SPECS.
40 HSS HACKSAW BLADE FOR STAINLESS STEEL CUTTING -1/2''
PCS MIRANDA/ITL/HSS/PATANI 100 Single Sided
41 GRINDING WHEEL 4 Pcs. GRINDWELL/BOSCH/HILTI/CAR
BORUNDUM 49 Dia 4 inch
42 AG-5 GRINDING WHEEL HI-CUT
Pcs. GRINDWELL/BOSCH/HILTI/CAR
BORUNDUM 50 Dia 5 inch
43
CUTTING WHEEL/DISC FOR ANGLE GRINDER 4 INCH
Pcs. GRINDWELL/BOSCH/HILTI/CAR
BORUNDUM 50 Dia 4 inch
44 AG-5 CUTTING WHEEL Pcs.
GRINDWELL/BOSCH/HILTI/CAR
BORUNDUM 50 Dia 5 inch
45 GASKET SHEET THICKNESS 6MM
MTR CHAMPION/ DIVINE CORK/ GRINDBECK
50 Min 36inch Width
46 PLIER COMBINATION CUTTING
PCS PYE/TAPARIA/EASTMAN/JK/VISEGRIP
10 200 MM SIZE
47
SCREW DRIVER SET EACH SET COMPRISING OF 6 SCREW DRIVERS
SET TAPARIA/PIE/ STANLEY/JK 6
48 LINE TESTER PCS TAPARIA/PIE/JK 40 500V AC
-
Page 6 of 7
49 NYLON CABLE TIE 150MM Packet KSS/NOVOFLEX/FLU-CON
20 Pack of 100Pcs.
50 NYLON CABLE TIE 250MM Packet KSS/NOVOFLEX/FLU-CON
20 Pack of 100Pcs.
51 NYLON CABLE TIE 300MM Packet
KSS/NOVOFLEX/FLU-CON
10 Pack of 100Pcs.
52 PP ROPE FOR MISCELLENEOUS PURPOSE
Kgs. ANY REPUTED MAKE 50 DIA
53 PVC BRAIDED HOSE PIPE DIA
Kgs. ANY REPUTED MAKE 50 AIR Hose Pipe
54 SLIDE WRENCH -12 Pcs. JK/PYE/TAPARIA 3
55 CUT OFF MACHINE 14 INCH
Pcs. BOSCH/HILTI/ YAMATO 1
220v AC, 14 inch, 3900 rpm, 15
Amp. , cut depth- 6 inch
56 DRILLING MACHINE Pcs. ITCO/RALLI WOLF/ HP/CROMWELL/ ANAND
1
Type: Pillar type without gear, equipped with Motor , pulley and Belt Cap: upto 25mm Table travel : Min. 250mm Table size : Min 250mmX250mm Accessories : DOL Starter, Machine Vice, drill chuck with Arbor & key, Reduction sleeves & drill drift
-
Page 7 of 7
Sr. No.
DESCRIPTION OF MATERIAL
UOM PREFERABLE MAKE QUAN-TITY
SPECS.
57 BENCH GRINDER Pcs. Wolf/Hilti/Bosch 1
Wheel Size 150x20x20mm Single Phase Power -
350W
withRubber feet
58 OLD DHOTI (WHITE COTTON 3 X 0.90 M)
Pcs. Any reputed make 1000 Only white Cotton Stuff
-
Page 8 of 7
-
1 PPR- 1627
Registered &
Corporate Office
SJVN Corporate office complex, Shanan Shimla,
Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17 FAX: 011- 41659204/14
TERMS AND CONDITIONS OF PPR-1627
The bids are invited using e-procurement mode, so please read the instructions carefully and
upload the filled in bids as per requirement of bid documents. The acknowledgement copy is to be
sent as a proof for the bid submission through tendering.
The Open Tender Enquiry through e-tendering under one part bid system is herewith invited for
Procurement of Consumables required for Annual Maintenance of G.Ts/BVH/ UABs and
Ventilation Blowers of NJHPS, SJVN Ltd. Jhakri as per detail enclosed in Annexure - A..
1. General instructions: 1.1 The SJVN Limited, hereinafter called "SJVN" / "Owner" is a Joint Venture of Govt. of India and
Govt. of Himachal Pradesh having its registered office at SJVN Corporate office complex,
Shanan Shimla, Himachal Pradesh, Pin No.-171006, have their Nathpa Jhakri Hydroelectric
Power Plant with a capacity of 6x250 MW at Nathpa (Distt. Kinnaur) and Jhakri (Distt. Shimla)
in the State of Himachal Pradesh, India.
1.2 SJVN has issued an invitation to bid as enclosed and will receive bids as set forth in the accompanying Bid documents.
1.3 Bids cannot be uploaded after the time & date fixed for receipt of bids as set out in the Invitation of Bid.
1.4 SJVN reserves the right to accept or reject any or all Bids without assigning any reason for such a decision.
1.5 All the cost and expenses incidental to preparation of the proposals, discussions and conferences, if any, including pre-award discussions with the Bidder, technical and other presentation
including any demonstrations etc. shall be to the account of the Bidder and Owner shall bear no
liability whatsoever on such costs and expenses.
1.6 Please note that bids in physical form shall not be entertained under any circumstances and are only to be submitted through e-tendering at https://sjvn.abcprocure.com.
1.7 DIGITAL SIGNATURES: To participate in e-Tender, the bidder needs to have a valid Digital Certificate (Class II or higher, signing & Encryption both) from a certifying authority of India
as per the IT Act, 2000. Valid Digital Certificate must be installed in a computer system to login
on website. Perform the below steps to confirm that valid digital certificate is available on your
computer system:
_ Open Internet Explorer.
_ Select Tools menu from menu bar or (Press Alt + T on keyboard)
_ Click on Internet Options >>Content >>Certificate button.
Digital certificate should be viewed under Personal heading.
1.8 Requirement of Digital Signature Certificate Please enable ActiveX Controls & Plug-ins. (Tools->Internet Options-> Security->Custom
Level)
Active-X controls need to be enabled in Internet browser. In order to ensure this, do the Following:
I. In Menu Bar ---Click on Tools - Internet Options Security Click on Trusted Sites IconClick on Sites button
-
2 PPR- 1627
Registered &
Corporate Office
SJVN Corporate office complex, Shanan Shimla,
Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17 FAX: 011- 41659204/14
II. Add the following two websites in Trusted Sites :- https://sjvn.abcprocure.com & https://www.tpsl-india.in
III. After that, click on tools menu of Internet explorer - Internet Options Security Click on Internet Icon. After Click on Custom Level button
From below ActiveX controls and plug-ins ---- Select below 5 Items to be enabled
(i) Download signed ActiveX controls select Prompt or Enable (ii) Download unsigned ActiveX controls select Prompt or Enable (iii)Initialize and script ActiveX controls not marked as safe for scripting select Prompt or
Enable
(iv) Run ActiveX controls and plug-ins-select Enable (v) Script ActiveX controls marked safe for scripting select Enable
After completed this above selection----Below option has available---Reset custom settings---Reset
To: Select low or medium ---Click on OK
Also, please check your system Date & Time it should be set as current date and time.
In case of Digital Certificate based Login, user need to download & install "Signer" file available under
Download Section at https://sjvn.abcprocure.com
Download and Install "Intermediary Certificate" available under Download Section at
https://sjvn.abcprocure.com.
Please disable or uninstall Third Party Toolbar / Add-ons from Browser.
1.9 The contract & procurement process through e-tendering/e-procurement system is in process at NJHPS, SJVN Jhakri and hence this tender is to be processed through e-tendering/e-procurement
system. The bids are to be filled and submitted online. To participate in e-tendering/e-
procurement, it is requested to register with our website https://sjvn.abcprocure.com. The one
year cost of registration on web site is Rs. 3068/- (Rs 2600/- plus GST@ 18%) is payable
directly to M/s e-Procurement Technologies Ltd. The bidder should also have the Digital
Signatures for security purpose. The detailed procedure for the registration is as under:-
a. Go to the url:- https://sjvn.abcprocure.com In the home page click on vender Registration.
b. Click on New Bidders Registration link available on home page. c. You need to furnish individual details as well as of company details in registration form. d. After filling all mandatory fields, you need to click on submit button to complete the
registration process.
e. After submission of the form, the user id and password are generated in the form of Acknowledgement.
f. The payment of annual registration fee amounting to Rs. 3068/- is to be made through DD/ Online through Net Banking/ Credit card/ debit card etc.
g. The User ID will be activated after DD/RTGS/NEFT/Net Banking/ Credit Card is received or realization of payment online. Send the Acknowledgement copy and
uploaded document below mentioned e-Mail ID.
For Registration enquiry and to activate User ID please call abcprocure Help Desk Centre
+91-79-4027-0555| 0507 | 0564 | 0563 | 0548, Cell: +91-93274519729, E-Mail ID
-
3 PPR- 1627
Registered &
Corporate Office
SJVN Corporate office complex, Shanan Shimla,
Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17 FAX: 011- 41659204/14
1.10 All the bidders are requested to get themselves registered well in advance to facilitate timely submission of the bid. In case bidders wait till last moment for uploading the bids and if any
technical problem is encountered at that time, the bid closing date & time may elapse.
1.11 Down loading Bid Documents: Bidder to access e-Tender portal of SJVN (http://sjvn.abcprocure.com) to access NIT document, after completing registration formality
and successful login vendor need to process for Tender Fee / Document Fee (if any) and after
that bidder can download detailed tender document.
Download Document link is available at the end of every tender notice along with access to
Corrigendum.
1.12 Bid Submission: (i) Bidder needs to login first on the tendering portal of SJVN (i.e.
http://sjvn.abcprocure.com). (ii) Search tender by filling necessary searching criteria after Login. (iii) After finding the tender on the screen, click on the Dashboard. (iv) Click on Declaration and then click on I Agree. (v) Click on the Tender Fees & Pay the Tender Fees Online (if any). (vi) Click on EMD and pay the EMD on line. (vii) Click on Prepare Bid and fill necessary Forms (Schedules). (viii) After filling Price Bid Form click on Final Encrypt. (ix) After filling all Forms & final Encryption of Price Bid click on Final Submission. (x) After Final Submission bidder will get receipt of Final Submission of their Bid.
1.13 The link help manual and vendor help for submission of bids is also available on the website. For
any assistance/ clarification for etendering registration, submission of bid through e-tendering/
procurement , bidder may contact the following persons/ representatives of M/s abcProcure:-
(i) Mr. Chanderkant-M- 09459242421, e-Mail: [email protected] (ii) Mr. Raman Kumar-M- 08449744125, e-Mail: [email protected] (iii) Mr. Rakesh Panwar-M- 08351088437, e-Mail: [email protected]
(iv) Mr. Rahul Dixit -Ph- 0794027055, e-Mail: [email protected]
(v) Mr. Pankesh Kumar-Ph- 07940270507, e-Mail: [email protected]
(vi) Mr. Pradip Parmar-Ph-07940270564 e-Mail: [email protected]
(vii) LinkContact us available on the home page of https://sjvn.abcprocure.com
The above persons are to be contacted for help/ assistance related to etendering registration,
submission of bid through e-tendering only.
For any other clarifications regarding the tender bidder may contact the following persons/
representatives of M/s SJVN:-
(i) Sh. Ajay Kumar: Mobile No. 09418014928 (E-mail ID : [email protected]) (ii) Sh. Rajesh Negi: Mobile No. 08894725811 (Email ID: [email protected]) (iii) Sh. Anil Kumar: Mobile No. 9418016210 (E-mail ID: [email protected] )
2.0 Submission of Bids 2.1 The GST detail of SJVN pertaining to Himachal Pradesh is enclosed at Annexure-I.
2.2 The bids will be submitted electronically at designated places in various schedules. The schedules cannot be downloaded as they are to be filled online. The tender is called under one part system:-
A) Price Bid Part which consist of following schedules:-
(i) Schedule-1 (Page 1 of 1) - Schedule of Prices and Taxes & duties Remarks: The above dynamic schedule is to be filled ONLINE.
-
4 PPR- 1627
Registered &
Corporate Office
SJVN Corporate office complex, Shanan Shimla,
Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17 FAX: 011- 41659204/14
The prevailing rate of taxes and duties is to be paid extra & clearly mentioned in the Schedule of Prices and Taxes & duties. In case nothing is mentioned or mentioned
NIL or zero then it shall be presumed that the rates quoted are inclusive of taxes and
duties or else the taxes & duties are not applicable. The taxes & duties shall be paid as
per applicable rate at the time of supply. Any increase in taxes & duties/ new
introduction of taxes & duties/ levy by the Govt. shall be paid by SJVN Ltd. provided
that such increase in taxes & duties/ new introduction of taxes & duties/ levy by the
Govt. is made with in schedule delivery period as per PO, otherwise same shall be paid
by the bidder.
B) Techno-Commercial part which contains the following:- (i) Schedule-2 Schedule of Deviations (ii) Schedule-3 General Information & Bank Account Detail (iii) Schedule-4 GST Registration Detail and Other Information (iv) Copy of GST Registration No. (The bid of unregistered dealer under GST/
Composite Dealers under GST shall be out rightly rejected. )
(v) SJVN reserves the right to ask additional information if necessary after opening of the techno-commercial bid.
(vi) EMD as per clause 6.0 below/Copy of NSIC/MSE Certificate as per Sr. No. 6.0 below (vii) Bank details duly authenticated by bank/ copy of cancelled cheque
Remarks: All above dynamic schedules are to be filled ONLINE. The bidders have to
fill all the required information in the above schedule.
3.0 The schedule for bid submission and opening is as under:- a. Bid Submission
Date of availability of Tender at
https://sjvn.abcprocure.com
12.10.2017
Last date for downloading tender
documents
31.10.2017 at 12:00 HRS (IST)
Bid Closing Date (Last Date and time for
uploading of filled in bids)
01.11.2017 at 13:00 HRS (IST)
b. Bid Opening
Bid Opening 01.11.2017 at 14:00 HRS (IST).
4.0 The bidder is advised to keep visiting the websites as mentioned below for any notifications/ amendments from SJVN side regarding the tender:-
(i) https://sjvn.abcprocure.com. (ii) www.sjvn.nic.in (iii) www.eprocure.gov.in.
5.0 Firm prices FOR Jhakri basis by road transport to be quoted and should be valid for 120 days from the date of opening of quotation. The prices should be inclusive of P&F Charges and any other
misc. charges but exclusive of taxes and duties. JHAKRI is at a distance of approx.150 KM from
Shimla on National highway (NH-5).
6.0 Cost of bid document and Bid Security / Earnest Money deposit (EMD) (ONLINE/ FDR/TDR)
6.1 The cost for purchase of bid document is NIL.
-
5 PPR- 1627
Registered &
Corporate Office
SJVN Corporate office complex, Shanan Shimla,
Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17 FAX: 011- 41659204/14
6.2 The bidder shall furnish, a bid security/ earnest money as part of the bid amounting to Rs. 13,000/- (Rupees Thirteen Thousand only).
6.3 EMD of the bidder shall be forfeited, if the bidder withdraws or amends its bids or impairs or derogates from the bid in any respect with in the period of validity of the bid. The EMD of the
successful bidder shall be retained as contract security until such period the contractor furnishes the
required CPG or until supply the complete material. If the contractor fails to fulfill his obligations,
the EMD, retained as contract security shall be forfeited. The EMD shall be forfeited @2% of the
total ordered value (for supplied items) plus total estimated cost or ordered value, whichever is
higher (for non-supplied items).
6.4 Micro or Small Enterprises (MSE)/NSIC registered firms are exempted from the submission of the Tender document cost and EMD and must enclose (Upload scanned copy of the MSE/ NSIC
certificate) for the same products as in NIQ above. If the MSE/ NSIC certificate does not contain
the item(s)/work(s/Services) as listed in our NIQ/NIT and no EMD is found submitted, then
SJVN may ask the bidder to submit the EMD and the same should reach within ten (10) days
from the date of SJVNs notification by E-mail/ Fax Letter, otherwise the bid shall be considered
as non-responsive and price bid of such firms shall not be considered for evaluation.
6.5 The Cost of bid document and Earnest Money (EMD) shall be submitted using below mentioned facilities:-
a) Credit Card b) Debit Card c) Net Banking d) NEFT/RTGS
Credit Card/Debit Card/Net Banking:
Bidder is required to add https://www.tpsl-india.in website in Trusted Zone as suggested above.
Bidder needs to feed correct details while making the payment through online payment gateway.
NEFT/RTGS:
To make payment through NEFT/RTGS, bidders will get an auto generated e-Mail which contains details of their Unique Bidder Code and when and how to do RTGS/NEFT and
details pertaining to it. This information will also be available on screen under heading of
NEFT/RTGS Instruction once bidder gets login.
Once bidder deposit amount in Beneficiary account number provided to them, while making payment for document fees and EMD by RTGS/NEFT payment option at the document fees
and EMD payment screen, bidder shall be able to view the funds already remitted by him/her
through NEFT /RTGS as available. Please proceed to make the payment. Upon doing so, the
required amount to be paid through the document fees and EMD, shall get appropriately
deducted from the available balance and payment shall be confirmed in real time.
This facility allows you to transfer lump sum amount to your Bidder ID account number as mentioned above via RTGS / NEFT. Bidder would be able to use the funds as and when
required till the time balance is available in Bidder ID. Also, Bidder can transfer more amount
as and when he/she require. Kindly note that the payment via RTGS / NEFT is required to be
made one working day in advance in order to make it available in your Bidder ID. Hence
please ensure that Bidder remit funds at least one day in advance before he/she would like to
-
6 PPR- 1627
Registered &
Corporate Office
SJVN Corporate office complex, Shanan Shimla,
Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17 FAX: 011- 41659204/14
make the document fees and EMD payment through RTGS / NEFT option on payment
gateway.
Caution: Please ensure that you need to mention the correct beneficiary account number and IFSC code as mentioned above while making payment via RTGS / NEFT. In the event of
funds remitted to wrong beneficiary account number, SJVN Limited or its Bank or its service
provider would not be responsible for the same.
Remarks: - The EMD submitted in the form of BG, DDs, local Cheque/ outstations Cheque
will not be considered
6.5 FDR/TDR:-
Please note that EMD (Earnest Money Deposit)/ Bid Security in the form of FDR/TDR (Pledged in favour of NJHPS, SJVN Ltd., Jhakri) is also acceptable and the same in
physical form should reach before the last date & time of submission of bid on the
following address:
Chief Manager
(Procurement & Contract Deptt.),
NJHPS, SJVN Limited, Jhakri (H.P.)-172201.
If EMD in the form of FDR/TDR does not reach in physical form before the last date & time of submission of bid, then bid of the firm shall be rejected.
7.0 (a) In case bidder is a Micro or Small Enterprises under the Micro Small and Medium Enterprises Development Act 2006, the bidder shall submit the following :
(i) Documentory evidence that the bidder is a Micro or Small Enterprises registered with District Industries Centres or Khadi and Village Industries Commission or Khadi and
Village Board or Coir Board or National Small Industries Corporation or Directorate
of Handicrafts and Handloom or any other body specified by Ministry of Micro, Small
and Medium Enterprises for the same products as in NIQ above.
(ii) If the MSE is owned by SC/ST Enterprises, the bidder shall furnish appropriate documentory evidence in this regard.
(iii) The above documents submitted by the bidder shall be duly certified by the statutory Auditor of the bidder or a practicing Chartered Accountant (not being an employee or
a Director or not having any interest in the bidders company/ firm) where audited
accounts are not mandatory as per law.
(b) If the bidder does not provide the above confirmation or appropriate document or any
evidence, then it will be presumed that they do not qualify for any preference
admissible as above.
(c) No EMD (bid security) is required to be paid by an MSE participating in the bidding
process. However, MSEs shall not be exempted from submission of Performance
Guarantee. (d) Tender document shall be issued free of cost to all MSEs participating in the bidding
process.
(e) Purchase preference will be applicable as per extant GOI Policy.
-
7 PPR- 1627
Registered &
Corporate Office
SJVN Corporate office complex, Shanan Shimla,
Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17 FAX: 011- 41659204/14
8.0 Delivery Period: The delivery of the material is to be completed within 60 days from the date of issue of Supply order.
9.0 Payment Term:
a) 100% percent Payment of the Ordered Value including taxes (100%) shall be made within 30 days after delivery of the full material at O&M store, NJHPS, SJVN, Jhakri and on submission
of following documents to the consignee for release of payment:-
(i) Bills in Triplicate. (ii) Copy of GST Registration No. (iii) Inspection Report as per Sr. no. 10.
b) The payment shall be released through electronic fund transfer and hence you are requested to give your bank account detail along with RTGS/IFSC code of your bank
branch. Bank charges if any, shall be borne by you. The details to be submitted in the
schedule as enclosed.
c) As per SJVN policy, no advance payment can be given.
d) All the payments for the supplies and/or services (as applicable) rendered by MSEs (Micro & Small Enterprises) supplier/contractor under the contract shall be released within forty five (45)
days from the day of acceptance.
Day of acceptance means day of actual delivery of goods or the rendering of services; or where
any objection is made in writing by SJVN regarding acceptance of goods or services within
fifteen days from the date of delivery of goods or the rendering of services, the day on which
such objection is removed by the contractor/supplier.
In case payments are not released as mentioned above, SJVN shall pay the principal amount plus
compound interest with monthly rests from the date immediately following the date agreed upon
@ three times of bank rates as notified by Reserve Bank of India time to time.
e) All the payments for the supplier and/or services (as applicable) rendered by non-MSEs (Non- Micro & Small Enterprises) supplier/ contractor under the contract shall be released within forty
five (45) days from the receipt of invoices/bills from the contractor/ supplier complete in all
respects.
In case payments are not released as mentioned above, SJVN shall pay the principal amount plus
simple interest from the date immediately following the date agreed upon @ 8% p.a.
10.0 Inspection: Inspection of the material shall be carried out by authorized representative of indenting deptt. of SJVN at O&M, Store, NJHPS, SJVN Ltd. Jhakri.
11.0 The purchaser reserves the right to increase /decrease the quantity at the time of placing the supply order.
12.0 The purchaser reserves the right to reject any or all the quotations without assigning any reason.
13.0 L. D. Charges: If the material is not supplied within stipulated period of delivery, then liquidated damages charges @ % per week or part thereof subject maximum to 5% shall
be levied on ordered value.
-
8 PPR- 1627
Registered &
Corporate Office
SJVN Corporate office complex, Shanan Shimla,
Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17 FAX: 011- 41659204/14
14.0 Deviations: Any deviation from the NIQ should be recorded in deviation schedule only i.e. Online Schedule of Deviations. Deviation mentioned at other places than the Online Deviation
Schedule will not be considered.
15.0 In case if it happens to be a holiday/network problem, bid will be opened on the next working day at the same place and time.
16.0 Any general documents like scanned copies of EMD (if any), price list/ any Central Govt./Govt./PSU sector copy(s) of supply order of same items for price justification etc. (if
required) are to be uploaded along with the bid.
17.0 Bid Opening and Evaluation The Owner will open all bids electronically in the presence of bidder's representatives who choose
to attend the opening at the time, on the date and at the place specified in the NIT / NIQ. Bidder's
representatives shall sign a register as proof of their attendance. In the event of the specified date
for the opening of bids being declared a holiday for the Owner/network problem, the bids will be
opened at the appointed time on the next working day.
No Mobile Phone will be permitted inside the bid opening room. Therefore, bidders should deposit Mobile Phones with Security gate at Reception.
Bids will be evaluated on item rate basis FOR Jhakri including all taxes.
Award will be placed on L1 bidder FOR Jhakri on item rate basis. Further MSME Policy will also be applicable as per clause no. 7.0 above.
No price preference shall be give to any bidders during the bid evaluations.
Cost loading will be carried out for the deviations taken by the bidder to determine the lowest evaluated Bid which will be considered for acceptance.
18.0 Clarification of Bids During bid evaluation, the Owner may, at its discretion, ask the Bidder for a clarification of its
bid. The request for clarification and the response shall be in writing, and no change in the price
or substance of the bid shall be sought, offered or permitted.
19.0 Correction of Errors (Applicable to extent possible)
The prices are to be filled in ONLINE DYNAMIC Schedules as under:-
A. The bidder has to fill the Unit Rates in the FIGURES only.
B. The entered UNIT RATES in figures shall be automatically converted in to the words.
C. The bidder has to fill the applicable percentage (%) of the taxes & duties. The amount for the taxes & duties shall be calculated automatically accordingly.
D. The above entered UNIT RATES in the figures and calculated amount of taxes & duties shall be multiplied with quantity to calculate the TOTAL AMOUNT in figures & as well as in words
automatically.
-
9 PPR- 1627
Registered &
Corporate Office
SJVN Corporate office complex, Shanan Shimla,
Himachal Pradesh, Pin No.-171006.
Liaison/Co-
ordination Office
SJVN, IRCON Building, Ground Floor, Saket New
Delhi. PIN-110017, TELE: 011- 41659210/17 FAX: 011- 41659204/14
E. After computation of the amounts as above, the values as computed shall be considered for evaluation as well as for award. If the bidder does not accept the above consideration, his bid
will be rejected and the Bid Security / EMD may be forfeited.
F. The Owner's determination of a bid's responsiveness is to be based on the contents of the bid itself without recourse to extrinsic evidence. If a bid is not substantially responsive, it will be
rejected by the Owner, and may not subsequently be made responsive by the Bidder by
correction of the non-conformity.
20.0 Consignee: Chief Manager (Store), NJHPS, SJVN Ltd., Jhakri.
21.0 Special Conditions: - The Bidders not offering the item(s) as per technical specification & Make mentioned in (Annexure-A), shall be considered techno-commercially non responsive
and price bid will not be considered for evaluation for such item(s).
22.0 The material is to be transported through Registered Common Carrier only (Registered Common Carrier mean the carrier registered with a State Transport Authority or a
Regional Transport Authority).
,
...., ....., (. .)-172201