2018 · table of contents by manufacturer adco 1 bobcat ... hensley style bolt on, excavator...

KyleMcNeir

Typewritten Text

KyleMcNeir

Typewritten Text

KyleMcNeir

Typewritten Text

KyleMcNeir

Typewritten Text

KyleMcNeir

Typewritten Text

KyleMcNeir

Typewritten Text

2018

KyleMcNeir

Typewritten Text

Table of Contents By Manufacturer

Adco 1 Bobcat 1 Case 3 Caterpillar 6

5 Packs _________________________ 6 Pedestals _________________________ 26 Adapters & Adapter Covers _________ 6 Pins _____________________________ 26 Assemblies ______________________ 10 Plow Bolts ________________________ 28

Base Edges & Plates, Scr. & Ret. Bars 10 Protectors/Ripper Shanks ____________ 29 Cleaner Bars / Corner Protectors _____ 11 Router Bits ________________________ 29 Cutting Edges ____________________ 11 Scarifier Shanks ____________________ 29 End Bits ________________________ 19 Segments _________________________ 29 Grader Blades ___________________ 23 Shank Noses ______________________ 31 Guards & Protectors _______________ 25 Side Cutters _______________________ 31 Guides__________________________ 26 Teeth ____________________________ 32

Heel Plates ______________________ 26 Top Plates, Washers, Retainers & Locks _ 41 Nuts ____________________________ 26 Wear Plates _______________________ 42 Packer Feet ______________________ 26 Weld-On Noses ____________________ 42

Chocky Bars 42 Clark-Hancock 42 Doosan 44 Esco 44 Fabco 50 Fanngs 50 Fiat 51 Ford-New Holland 52 Gallion 53 Geith 53 H&L 53 Hendrix 55 Hensley 56 Hitachi 61 Hyundai 62 JCB 63 John Deere 63 Komatsu 68 Kubota 73 Liebherr 74 Linkbelt 74 Massey Ferguson 77 New Holland 77 Romac 78 Rubber Tracks 79 Takeuchi 98 Terex 98 Volvo 98 Wear Bars 100 Wear Buttons 100 Wear Plates 100 Yanmar 101

Warranty: Romac parts are warranted against defects in material and workmanship. This warranty does not apply to any part, which have been subjected to misuse, neglect, accident, hard face weld or if not installed according to instructions and specifications. All items manufactured are wearable and expendable. There are no labor charges for changing any Romac Part. Romac reserves the right to pass final judgment on all claims for credit.

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)Adco Style PartsAdco Style Adapters310C CENTER WELD ON ADAPTER Adco style center, weld on, excavator adapter for a 300C bucket tooth that takes a P160 roll pin 35.49

310LH LH WELD ON ADAPTERAdco style left hand, weld on, excavator adapter for a 300LH bucket tooth that takes a P160 roll pin 31.97

310RH RH WELD ON ADAPTERAdco style right hand, weld on, excavator adapter for a 300RH bucket tooth that takes a P160 roll pin 31.97

410C CENTER ADAPTERAdco style center, weld on, excavator adapter for a 400C bucket tooth that takes a 9J2358 pin and an 8E6359 retainer 22.00

410LH LH ADAPTERAdco style LH, weld on, excavator adapter for a 400LH bucket tooth that takes a 9J2358 pin and an 8E6359 retainer 22.00

410RH RH ADAPTERAdco style RH, weld on, excavator adapter for a 400RH bucket tooth that takes a 9J2358 pin and an 8E6359 retainer 22.00

510C CENTER ADAPTERAdco style center, weld on, excavator adapter for a 500C bucket tooth that takes a P400HD flex pin 70.50

510LH LH ADAPTER Adco style LH, weld on, excavator adapter for a 500LH bucket tooth that takes a P400HD flex pin 40.00

510RH RH ADAPTER Adco style RH, weld on, excavator adapter for a 500RH bucket tooth that takes a P400HD flex pin 40.00

X110C CENTER WELD ON ADAPTERAdco style center, weld on, excavator adapter with a 1" lip thickness for an X100C bucket tooth that takes a P156 roll pin 8.60

X110LH LH WELD ON ADAPTERAdco style left hand, weld on, excavator adapter with a 1" lip thickness for an X100LH bucket tooth that takes a P156 roll pin 5.90

X110RH RH WELD ON ADAPTERAdco style right hand, weld on, excavator adapter with a 1" lip thickness for an X100RH bucket tooth that takes a P156 roll pin 5.90

Adco Style Teeth100C CENTER TOOTH Adco style 100 series center excavator bucket tooth, takes a P156 roll pin; Use Item # X100C 3.09100LH LH TOOTH Adco style 100 series left hand excavator bucket tooth, takes a P156 roll pin; Use Item # X100LH 2.87

100RH RH TOOTHAdco style 100 series right hand excavator bucket tooth, takes a P156 roll pin; Use Item # X100RH 2.93

200C CENTER TOOTH Adco style 200 series center excavator bucket tooth, takes a P160 flex pin 6.70200LH TIGER TOOTH Adco style 200 series left hand tiger excavator bucket tooth, takes a P160 roll pin 6.70200RH TIGER TOOTH Adco style 200 series right hand tiger excavator bucket tooth, takes a P160 roll pin 6.703000LH TIGER TOOTH Adco style left hand tiger excavator bucket tooth, takes a P160 roll pin 6.483000RH TIGER TOOTH Adco style right hand tiger excavator bucket tooth, takes a P160 roll pin 6.48300C CENTER TOOTH Adco style 300 series center excavator bucket tooth, takes a P160 roll pin 9.00300LH TIGER TOOTH Adco style 300 series left hand tiger excavator bucket tooth, takes a P160 roll pin 8.00300RH TIGER TOOTH Adco style 300 series right hand tiger excavator bucket tooth, takes a P160 roll pin 8.004000LH TIGER TOOTH Adco style left hand tiger excavator bucket tooth, takes a P160 roll pin 12.504000RH TIGER TOOTH Adco style right hand tiger excavator bucket tooth, takes a P160 roll pin 12.50400C CENTER TOOTH Adco style 400 series center excavator bucket tooth, takes a 9J2358 pin and an 8E6359 lock 20.39

400LH TIGER TOOTHAdco style 400 series left hand tiger excavator bucket tooth, takes a 9J2358 pin and an 8E6359 lock 20.39

400RH TIGER TOOTHAdco style 400 series right hand tiger excavator bucket tooth, takes a 9J2358 pin and an 8E6359 lock 20.39

500C CENTER TOOTH Adco style 500 series center excavator bucket tooth, that takes a P400HD flex pin 21.00500LH LH TOOTH Adco style 500 series LH excavator bucket tooth, that takes a P400HD flex pin 21.00500RH RH TOOTH Adco style 500 series RH excavator bucket tooth, that takes a P400HD flex pin 21.00X100C CENTER TOOTH Adco style 100 series center excavator bucket tooth, takes a P156 roll pin 3.09X100LH LH TOOTH Adco style 100 series left hand excavator bucket tooth, takes a P156 roll pin 2.87X100RH RH TOOTH Adco style 100 series right hand excavator bucket tooth, takes a P156 roll pin 2.93Adco Style Weld-On Noses3010LWN NOSE PIECE Adco style left hand weld-on nose for an excavator, takes a P160 roll pin 8.403010RWN NOSE PIECE Adco style right hand weld-on nose for an excavator, takes a P160 roll pin 8.403010WNRC NOSE PIECE Adco style center weld-on nose for an excavator, takes a P160 roll pin 12.004010WNL NOSE PIECE Adco style left hand weld-on nose for an excavator, takes a P160 roll pin 15.49

Bobcat Style PartsBobcat Style 5 Packs6737325 (5PK) 5 PACKS - DIRT

Bobcat style 6737325 5 Pack for a skid steer, includes 5 - 6737325 dirt teeth and 5 - 6737326 flex pins 11.10

6737325LP (5PK) 5 PACKS - HD DIRTBobcat style 6737325LP 5 Pack for a skid steer, includes 5 - 6737325LP heavy duty dirt teeth and 5 - 6737326 flex pins 15.00

6737325T (5PK) 5 PACKS - TIGERBobcat style 6737325T 5 Pack for a skid steer, includes 5 - 6737325T tiger teeth and 5 - 6737326 flex pins 19.50

6737325WT(6737325T(5PK) 5 PACKS - TWIN TIGER/TIGER

Bobcat style 5 pack, 2 of 6737325WT twin tiger bucket teeth, 3 of 6737325T tiger bucket teeth and 5 - 6737326 flex pins 21.60

6737325WT (5PK) 5 PACKS - TWIN TIGERBobcat style 6737325WT 5 Pack for a skid steer, includes 5 - 6737325WT twin tiger teeth and 5 - 6737326 flex pins 25.00

7102097 (5PK) 5 PACKS - FLAREBobcat style 7102097 5 Pack for a skid steer, includes 5 - 7102097 flare teeth and 5 - 6737326 flex pins 25.50

Bobcat Style Adapters

6518120 WELD ON ADAPTERH&L style wrap around, weld-on, skid steer adapter with a 1" lip for a 230 series bucket tooth; Use Item #2740AW23 3.53

6560375 WELD ON ADAPTERH&L style weld on, skid steer adapter with a .63" to .88" lip thickness for a 2A bucket tooth; Use Item #835-2A 1.50

6630398 FLUSH MOUNT ADAPTERBobcat style flush mount adapter with a .75" lip thickness for a 230 series bucket tooth, takes a 23FP flex pin, Use Item #6630398 3.97

6716017 FLUSH MOUNT ADAPTERHensley style flush mount, bolt on, skid steer adapter for a 156 series bucket tooth; Use Item #X156FL 4.85

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)

6737324 FLUSH MOUNT ADAPTERBobcat style flush mount, 2 bolt adapter with a 3/4" lip thickness for a skid steer; distance between bolt holes is 3" center to center 4.85

6808770 BOLT ON ADAPTERHensley style bolt on adapter with a .65" lip thickness for a 156 series bucket tooth; takes 2 - 1/2" x 2" CS cap screws and 2 - 1/2" CS nuts; Use Item # X156-50 4.17

7107324 BOLT ON ADAPTER Bobcat style bolt on, skid steer adapter with a 3/4" lip thickness; like item #X156-50 4.00

6725278FPA FLUSH MOUNT ADAPTERHensley style flush mount, bolt on adapter with a 3/4" lip thickness for a 156 series bucket tooth; Use Item # X156FL 4.85

X156-5023 BOLT ON ADAPTERHensley style bolt on adapter for a 230 series bucket tooth; takes 2 of a 1/2" x 2" cs cap screw and 2 of a 1/2" cs nut 3.78

X156FL BOLT ON ADAPTER Hensley style flush mount, bolt on adapter with a 3/4" lip thickness for a 156 series bucket tooth 4.85X230-156 WELD ON ADAPTER Hensley style weld on adapter for a 156 series bucket tooth with a 5/8" lip thickness 3.81X550-156 WELD ON ADAPTER Hensley style weld on adapter for a 156 series bucket tooth with a 1" lip thickness 4.40X552-156 WELD ON ADAPTER Hensley style weld on adapter for a 156 series bucket tooth with a 3/4" lip thickness 5.68X834-156 WELD ON ADAPTER Hensley style weld-on adapter for a 156 series bucket tooth with a 3/4" - 1" lip thickness 4.40X835-156 WELD ON ADAPTER Hensley style weld-on adapter for a 156 series bucket tooth with a 5/8" - 7/8" lip thickness 3.41X837-156 WELD ON ADAPTER Hensley style weld-on adapter for a 156 series bucket tooth 3.56Bobcat Style Assemblies

6630397 FLUSH MOUNT ASSEMBLYH&L style flush mount, skid steer assembly, takes a 230 bucket tooth, a CL-1001-23 flush mount adapter and a 23FP flex pin; Use Item #230 FM ASSY 7.12

6684448 BOLT ON ASSEMBLYHensley style standard bucket tooth excavator assembly, takes an X156 standard dirt bucket tooth, an X156-50 bolt on adapter and a P156 roll pin; Use Item # X156-50 ASSY 5.41

6716002 BOLT ON ASSEMBLYHensley style bolt on, excavator assembly, takes an X156 dirt bucket tooth, an X156-50 bolt on adapter and a P156 roll pin; Use Item #X156-50 ASSY 5.41

6717947 FLUSH MOUNT ASSEMBLYHensley style flush mount, skid steer assembly, takes an X156L long bucket tooth, an X156FL flush mount adapter and a P156 roll pin; Use Item #X156L FLUSH ASSY 7.20

6732465 FLUSH MOUNT ASSEMBLYHensley style long bucket tooth skid steer assembly, takes an X156L long bucket tooth, an X156FL flush mount adapter and a P156 roll pin; Use Item # X156L FLUSH ASSY 7.20

7107330 BOLT ON ASSEMBLYBobcat style bolt on, excavator assembly; takes a 7107319 dirt bucket tooth, a 7107324 bolt on adapter and a 6737326 flex pin 5.82

6737322Y-ASSM W/ FN FLUSH MOUNT ASSEMBLY

Bobcat style flush mount, skid steer assembly, takes a 6737325 dirt bucket tooth, a 6737324 bolt on flush mount adapter, a 6737326 flex pin and 2 - 5/8" bolts and 2 - 5/8" flange nuts 7.73

6737322Y-ASSM/LP FLUSH MOUNT ASSEMBLYBobcat style flush mount, skid steer assembly, takes a 6737325LP heavy duty dirt bucket tooth, a 6737324 bolt on flush mount adapter, a 6737326 flex pin and comes with 2 - 5/8" bolts and nuts 8.51

6737322Y-ASSY FLUSH MOUNT ASSEMBLYBobcat style flush mount, skid steer assembly, takes a 6737324 bolt on flush mount adapter, a 6737325 bucket tooth, a 6737326 flex pin and comes with 2 - 5/8" bolts and nuts 8.00

6737322Y-ASSY7107319 BOLT ON ASSEMBLY

Bobcat style bolt on assembly; takes a 6737324 bolt on adapter, a 7107319 bucket tooth and a 6737326 flex pin 8.51

7102097- ASSY FLARE TOOTH ASSEMBLYBobcat style flush mount, skid steer assembly; takes a 6737324 bolt on flush mount adapter, a 7102097 flare bucket tooth, a 6737326 flex pin and comes with 2 - 5/8" bolts and nuts 9.93

7107324 ASSY BOLT ON ASSEMBLYBobcat style bolt on excavator assembly; takes a 7107324 bolt on adapter, a 7107319 bucket tooth, and a 6737326 flex pin 5.82

Bobcat Style Cutting Edges

6661452 CENTER EDGE

Bobcat style bolt on center cutting edge. This is a double beveled reversible bucket center cutting edge that is .625” thick, 8” wide and 61.5” in length. It takes 7 of a 5/8” X 2 3/4” (625X275) plow bolt and 7 of a 5/8” (625 HEX NUT) hex nut. 78.00

6661453 CENTER EDGE

Bobcat style bolt on center cutting edge. This is a double beveled reversible bucket center cutting edge that is .625” thick, 8” wide and 68.25” in length. It takes 11 of a 5/8” X 2 3/4” (625X275) plow bolt and 11 of a 5/8” (625 HEX NUT) hex nut. 87.00

6661455 CENTER EDGEBobcat style bolt on center cutting edge. This is a double beveled reversible bucket center cutting edge that is .75” thick, 8” wide and 79.50” in length. 122.00

6713713 CENTER EDGE

Bobcat style bolt on center cutting edge. This is a double beveled reversible bucket center cutting edge that is .625” thick, 8” wide and 74” in length. It takes 11 of a 5/8” X 2 3/4” (625X275) plow bolt and 11 of a 5/8” (625 HEX NUT) hex nut. 93.00

6718005 CENTER EDGEBobcat style bolt on center cutting edge. This is a double bevel reversible bucket cutting edge that is .625" thick, 8" wide and 61.8" in length. 81.13


6718007 CENTER EDGEBobcat style bolt on center cutting edge. This is a double bevel reversible bucket cutting edge that is .625" thick, 8" wide and 74" in length. 97.00


6805367 CENTER EDGEBobcat style bolt on center cutting edge. This is a double beveled reversible bucket center cutting edge that is .625” thick, 6” wide and 59.88” in length. 57.00

Bobcat Style Pins1029062 PIN Caterpillar style pin Use Item #3G0500 2.14

14J003732B ROLL PINHensley style roll pin for a 156 series, this pin is 2" long and has a .375" pin diameter; Use Item #P156 0.04

14J373B ROLL PINHensley style roll pin for a 156 series, this pin is 2" long and has a .375" pin diameter; Use Item #P156 0.04

23DLFP FLEX PIN Esco style four tab flex pin 0.086567620 FLEX PIN H&L style flex pin for 23 series bucket tooth; Use Item #23FP 0.09

6671145 ROLL PINHensley style roll pin for a 156 series, this pin is 2" long and has a .375" pin diameter; Use Item #P156 0.04

6737326 FLEX PIN Bobcat style flex pin for a 6737325 bucket tooth 0.026737326P FLEX PIN Bobcat style flex pin for a 6737325 bucket tooth; Use Item #6737326 0.02TF23P FLEX PIN Fanggs style long flex pin for a 230 series bucket tooth 0.09Bobcat Style Teeth1550041B HD TOOTH H&L style heavy duty crimp on, skid steer bucket tooth; Use Item #3CHXL 2.20230FG FORGED DIRT TOOTH H&L style forged, skid steer bucket tooth for a 230 series; takes a 23FP flex pin 3.00230SP DIRT TOOTH H&L style dirt, skid steer bucket tooth for a 230 series; takes a 23FP flex pin 3.09

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)230ST STAR TOOTH H&L style star, skid steer bucket tooth for a 230 series, takes a 23FP flex pin 2.6523TL TIGER TOOTH H&L style tiger, skid steer bucket tooth for a 230 series, takes a 23FP flex pin 2.0923WTL TWIN TIGER TOOTH H&L style twin tiger, skid steer bucket tooth for a 230 series, takes a 23FP flex pin 2.606630424 TOOTH H&L style cast, skid steer bucket tooth, takes a 23FP flex pin; Use Item #23FC 2.096656388 TOOTH H&L style fabricated, skid steer bucket tooth; Use Item #3C 1.50

6657328 TIGER TOOTHH&L style heavy duty, tiger, skid steer bucket tooth for a 230 series; takes a 23FP flex pin; Use Item #230T 2.51

6657329 TWIN TIGER TOOTHH&L style twin tiger, skid steer bucket tooth for a 230 series; takes a 23FP flex pin; Use Item #230WT 3.61

6657330 DIRT TOOTHH&L style standard dirt, skid steer bucket tooth for a 230 series; takes a 23FP flex pin; Use Item #230 2.98

6671147 TIGER TOOTHHensley style tiger, skid steer bucket tooth for a 156 series; takes a P156 roll pin; Use Item #X156T 2.57

6671148 TWIN TIGER TOOTHHensley style twin tiger, skid steer bucket tooth for a 156 series; takes a P156 roll pin; Use Item #X156WT 2.65

6672351 HD TOOTH Hensley style heavy duty bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156LP 3.046682026 TOOTH H&L style cast, skid steer bucket tooth; takes a 2AP roll pin; Use Item #2AC 1.346684447 UNITOOTH H&L style 2 bolt unitooth; Use Item # CL-1003R 3.74

6710001 LONG TOOTHHensley style long, skid steer bucket tooth for a 156 series; takes a P156 roll pin; Use Item #X156L 1.76



6737325 TOOTH Bobcat style skid steer bucket tooth, takes a 6737326 flex pin 1.767102097 FLARE TOOTH Bobcat style flare, skid steer bucket tooth; takes a 6737326 flex pin 5.077107319 DIRT TOOTH Bobcat style dirt, skid steer bucket tooth; takes a 6737326 flex pin 1.807107320 TIGER TOOTH Bobcat style tiger, skid steer bucket tooth; takes a 6737326 flex pin; Use Item #6737325T 3.867107321 TWIN TIGER TOOTH Bobcat style twin tiger, skid steer bucket tooth; takes a 6737326 flex pin; Use Item #6737325WT 4.961550017B TOOTH H&L style skid steer bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.346737325L DIRT TOOTH Bobcat style skid steer bucket tooth, takes a 6737326 flex pin; Use Item # 6737325 1.766737325LP HD TOOTH Bobcat style heavy duty, skid steer bucket tooth; takes a 6737326 flex pin 2.986737325S DIRT TOOTH Bobcat style dirt, skid steer bucket tooth; takes a 6737326 flex pin; Use Item # 7107319 1.806737325T TIGER TOOTH Bobcat style tiger, skid steer bucket tooth; takes a 6737326 flex pin 3.866737325WT TWIN TIGER TOOTH Bobcat style twin tiger, skid steer bucket tooth; takes a 6737326 flex pin 4.968523 FLARE TOOTH H&L style flare bucket tooth, takes a 23FP flex pin; Use Item # 230F 3.37

CL-1003R UNITOOTHH&L style skid steer unitooth with a .65" lip thickness and a 1.78" bolt hole spacing, center to center; takes 2 - 1/2" x 2" CS cap screws and 2 - 1/2" CS nuts 3.74

TF23D FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 230 series; takes a TF23P flex pin 3.79X156F FLARE TOOTH Hensley style flare, skid steer bucket tooth for a 156 series; takes a P156 roll pin 2.87X156LP HD TOOTH Hensley style heavy duty, skid steer bucket tooth for a 156 series; takes a P156 roll pin 3.04Bobcat Style Weld-On NosesX156WN NOSE PIECE Hensley style weld on nose for a 156 series 1.92

Case Style PartsCase Style Adapters

122670A1 WELD ON ADAPTERHensley style weld on adapter with a 1 1/2" lip thickness for a 290 series bucket tooth, takes a P290 flex pin; Use Item # X158-290 22.16

122673A1 WELD ON ADAPTER Hensley style weld on adapter with a 2" lip thickness for a 370 series; Use Item # X940-370 33.502740AW23 WELD ON ADAPTER H&L style weld on, wrap around adapter with a 1" lip thickness for a 230 series bucket tooth 3.53

7703990 WELD ON ADAPTERH&L style weld on, wrap around, short leg adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item # 2740W23 3.77

7704801 WELD ON ADAPTERH&L style weld on, excavator adapter with a .63" to .88" lip thickness for a 2A bucket tooth; Use Item # 835-2A 1.50

7704803 WELD ON ADAPTERH&L style weld on, excavator adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item # 834-23 3.04

9827955 FLUSH MOUNT ADAPTERH&L style flush mount adapter with a .75" lip thickness for a 230 series bucket tooth; Use Item # CL-1001-23 3.97

A128J3P WELD ON ADAPTERH&L style weld on, excavator adapter with a .63" to .75" lip thickness, takes a 3C crimp on bucket tooth; Use Item #834-3C 2.68

B91262 WELD ON ADAPTERH&L style weld on, wrap around, short leg adapter for a 230 series with a 1" lip thickness; Use Item #2740W23 3.77

B91340 WELD ON ADAPTERH&L style weld on, excavator adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #834-23 3.04

D136811 WELD ON ADAPTERH&L style weld on, wrap around, short leg adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item # 2740W23 3.77

D26268 WELD ON ADAPTERH&L style weld-on, excavator adapter with a .63" to .75" lip thickness for a 3C bucket tooth; Use Item #834-3C 2.68

D26368 WELD ON ADAPTERH&L style weld on, excavator adapter with a .63" to .75" lip thickness, takes a 3C crimp on bucket tooth; Use Item #834-3C 2.68

D41659 WELD ON ADAPTER H&L style weld on adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #834-23 3.04


D49586 BOLT ON ADAPTERFabco style bolt on adapter with a 3/4" lip thickness for a 230 series bucket tooth; Use Item #L3445-23 6.38


H017156 BOLT ON ADAPTER Hensley style flush mount, bolt on adapter for a 156 series bucket tooth; Use Item # X156FL 4.85

H036657 WELD ON ADAPTERH&L style weld on, excavator adapter with a .63" to .88" lip thickness, takes a 2A crimp on bucket tooth; Use Item #835-2A 1.50

H61283 WELD ON ADAPTERH&L style weld on, excavator adapter with a .63" to .88" lip thickness for a 2A bucket tooth; Use Item #835-2A 1.50


L43266 SHORT LEG ADAPTERH&L style wrap around short leg adapter with a 3/4" lip thickness for a 230 series bucket tooth; Use Item # 2740W23 3.77

R500567 WELD ON ADAPTER H&L style weld on adapter for a 230 series with a 3/4" lip thickness; Use Item #2740MW23 4.30

R500568 WELD ON ADAPTERH&L style weld on, wrap around adapter for a 230 series, has a 1" lip thickness; Use Item #2740AW23 3.53

ZJZ83423 WELD ON ADAPTERH&L style weld on, excavator adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #834-23 3.04

Case Style Assemblies

RK220CSL 1" STANDARD ASSEMBLY

Hensley style standard loader assembly for a 1" lip thickness, takes an X621-220 center adapter, an X220 dirt bucket tooth and a P160 roll pin; the adapter takes 2 - 750 x 300 plow bolts and 2 - 750 hex nuts 24.10

RK220CSL R/L 1" STANDARD ASSEMBLY

Hensley style standard loader assembly for a 1" lip thickness, takes an X622-220 corner adapter, an X220 dirt bucket tooth and a P160 roll pin; the adapter takes 2 - 750 x 300 plow bolts and 2 - 750 hex nuts 31.25

Case Style Cutting Edges

112946A1 CENTER EDGECase style bolt on center cutting edge for an 1150 Case Loader. This is a double beveled reversible bucket cutting edge that is .75" thick, 6" wide and 83.125" in length. 125.00

112946A1-8 CENTER EDGECase style bolt on center cutting edge for an 1150 Case Loader. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 83.125" in length. 125.00

185506A1 CENTER EDGECase style bolt on center cutting edge for a Case Backhoe. This is a double beveled reversible bucket cutting edge that is .75" thick, 6" wide and 94.188" in length. 114.86

294681A1 CENTER EDGECase style bolt on center cutting edge for a Case Skid Steer. This is a double beveled reversible bucket cutting edge that is .75” thick, 8” wide and 73.897” in length. 114.00

299336A1 CENTER EDGECase style bolt on cutting edge, for a skid steer bucket. This is a double beveled reversible bucket cutting edge that is .75” thick, 8” wide and 82.68” in length. 127.00

360940A1 CENTER EDGECase style bolt on center cutting edge for a Case 521D Loader. This is a double beveled reversible bucket center cutting edge that is 1” thick, 10” wide and 49.45” in length. 115.30

360941A2 END EDGECase style bolt on end cutting edge for a Case 521D Loader. This is a double beveled reversible bucket end cutting edge that is 1” thick, 10” wide and 23.47” in length. 61.00

372081A1 CENTER EDGECase style bolt on end cutting edge for a 621 Case Loader. This is a double beveled reversible bucket cutting edge that is 1” thick, 10” wide and 24.764” in length. 128.00

372082A2 END EDGECase style bolt on center cutting edge for a 621 Case Loader. This is a double beveled reversible bucket cutting edge that is 1” thick, 10” wide and 52.126” in length 61.00

CE12496FSB WELD ON EDGECaterpillar style weld on edge for a Caterpillar Excavator. This is a .5” thick, 4” wide and 8’ long weld on edge. 48.50

D145680 BASE EDGECase style bolt on base edge for a 580 Case Backhoe. This is a base edge that is .75" thick, 6" wide and 80.5" in length. 97.99

D145681 CENTER EDGECase style bolt on center cutting edge for a 580 Case Loader. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 82" in length. 136.69

D51100 HOT CUPPED END BIT RHCase style bolt on end bit for a 350 Case Bulldozer. This is a hot cupped right hand end bit that is 1" thick, 8" wide and 15" in length. 28.66

D51101 HOT CUPPED END BIT LHCase style bolt on end bit for a 350 Case Bulldozer. This is a hot cupped left hand end bit that is 1" thick, 8" wide and 15" in length. 28.66

L125171 CENTER EDGECase style bolt on center cutting edge for an 821 Case Loader. This is a double beveled reversible bucket cutting edge that is 1.25” thick, 12” wide and 39.724” in length. 155.30

L125172 END EDGECase style bolt on end cutting edge for an 821 Case Loader. This is a double beveled reversible bucket cutting edge that is 1.25” thick, 12” wide and 34.39” in length. 135.20

R36267 CENTER EDGECase style bolt on center cutting edge for an 850 Case Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 6" wide and 74.75" in length. 71.87

R41351 HOT CUPPED END BIT LHCase style bolt on end bit for a 350 Case Bulldozer. This is a hot cupped left hand end bit that is 1" thick, 8" wide and 15" in length. 22.00

R41352 HOT CUPPED END BIT RHCase style bolt on end bit for a 350 Case Bulldozer. This is a hot cupped right hand end bit that is 1" thick, 8" wide and 15" in length. 22.00

R41908 CENTER EDGEVolvo style bolt on center edge for a 1450 loader. This is a double beveled center edge that is .75" thick, 8" wide and 42.75" in length. 67.00

R41909 END EDGEVolvo style bolt on end edge for a 1450 loader. This is a double beveled end edge that is .75" thick, 8" wide and 35" in length. 55.00

R42490 LEVEL CUT END BIT RH OR LHCase style bolt on end bit for a 650 Case Bulldozer. This is a level cut right hand or left hand end bit that is .75" thick, 8" wide and 17.402" in length. 26.50




R57841 LEVEL CUT END BIT RH OR LHCase style bolt on end bit for a 450 Case Bulldozer. This is a level cut right hand or left hand end bit that is .625" thick, 6" wide and 12" in length. 11.90

R57842 CENTER EDGECase style bolt on center cutting edge for a 450 Case Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 6" wide and 63.75" in length. 61.33

R57843 CENTER EDGECase style bolt on center cutting edge for a 450 Case Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 6" wide and 79.875" in length. 76.72

ZPC215381 CENTER EDGECase style bolt on center edge for a Backhoe. This is a double beveled reversible center edge that is .75" thick, 8" wide and 82" in length. 129.00

Case Style End Bits

R37034 RH/LH END BITCase style bolt on level cut RH/LH end bit for an 850G bulldozer. This end bit is 1" thick, 8" wide and 17.5" long. 34.00

R41911 RH END BITCase style bolt on right hand hot cupped end bit for an 850 bulldozer. This end bit is 1" thick, 10" wide and 21.5" long. 52.00

R41910 LH END BITCase style bolt on left hand hot cupped end bit for an 850 bulldozer. This end bit is 1" thick, 10" wide and 21.5" long. 52.00

Case Style Pins

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)23FP FLEX PIN H&L style flex pin for a 230 series bucket tooth 0.09245466A1 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.0924FP FLEX PIN H&L style flex pin for a 240 series bucket tooth 0.1225-30PN PIN Esco style pin for a 25 & 30 series bucket tooth, takes a 25-30LK lock 0.2025FP FLEX PIN H&L style flex pin for a 250 series bucket tooth 0.2027FP FLEX PIN H&L style flex pin for a 270 series bucket tooth 0.20D134686 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09D39094 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09D39448 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item #24FP 0.12L32090 FLEX PIN H&L style flex pin for a 250 series bucket tooth ; Use Item #25FP 0.20R29177 FLEX PIN H&L style flex pin for a 270 series bucket tooth; Use Item #27FP 0.20R31916 PIN Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.20R35318 PIN Esco style pin, takes an 18-20LK lock; Use Item #18-20PN 0.09S91265 PIN Esco style pin for a 35 or 40 series bucket tooth, takes a 35-40LK lock; Use Item #35PN 0.22

ZJZ156PN ROLL PIN Hensley style 156 series roll pin, this pin is 2" long and has a .375" pin diameter; Use Item #P156 0.04Case Style Retainers25-30LK RUBBER LOCK Esco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin 0.02

R31917 RUBBER LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item # 25-30LK 0.02

R35319 RUBBER LOCK Esco style rubber lock, takes an 18-20PN pin; Use Item #18-20LK 0.02

S90192 RUBBER LOCKEsco style lock for a 35 or 40 series bucket tooth, takes either a 35PN pin or a 40PN pin; Use Item #35-40LK 0.11

Case Style Teeth

122668A1 DIRT TOOTHHensley style standard dirt bucket tooth for a 290 series, takes a P290 flex pin or a 2K2901 pin; Use Item #X290 7.94

122671A1 DIRT TOOTH Hensley style dirt bucket tooth for a 370 series, takes a P370STP flex pin; Use Item # X370 19.97

122674A1 DIRT TOOTHHensley style dirt bucket tooth for a 330 series, takes a P330 flex pin or a 2K3301 pin; Use Item #X330 12.57

126934A1 TIGER TOOTH Hensley style tiger bucket tooth for a 290 series, takes a P290 flex pin; Use Item # X290T 8.05

126936A1 TWIN TIGER TOOTHHensley style twin tiger bucket tooth for a 290 series, takes a P290 flex pin or a 2K2901 pin; Use Item #X290WT 10.14

126943A1 TIGER TOOTH Hensley style tiger bucket tooth for a 330 series, takes a P330 flex pin; Use Item #X330T 11.68

126946A1 TWIN TIGER TOOTHHensley style twin tiger bucket tooth for a 330 series, takes a P330 flex pin or a 2K3301 pin; Use Item #X330WT 14.88

127221A1 TIGER TOOTH Hensley style tiger bucket tooth for a 370 series, takes a P370 flex pin; Use Item # X370T 16.95

167085 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series, takes an 18-20LK lock and an 18-20PN pin; Use Item #18TL 2.43

251474 TIGER TOOTH H&L style heavy duty tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.513100 DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.34442677A1 DIRT TOOTH H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98442689A1 FLARE TOOTH H&L style flare bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230F 3.376Y0359 RIPPER TOOTH Caterpillar style ripper bucket tooth, takes a 9J2358 pin and a 1U2405 lock; Use Item # 6Y0359 27.3470062160 SCARIFIER TOOTH Caterpillar style heavy duty, scarifier bucket tooth; Use Item #2D5572 3.30

79023544 RIPPER TOOTHEsco style SBIC ripper bucket tooth; takes a 35RPG pin and a 35RBG bushing; Use Item # 35R14-2 28.88

8282867 RIPPER TOOTHEsco style ripper bucket tooth for a 22 series, takes a 22RPG pin and 22RBG bushing; Use Item # 22R10 10.36

8330 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.9886109127 LONG TOOTH Hensley style long dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156L 1.76931312 DIRT TOOTH H&L style dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.069624499 TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240WT 4.63B96108 STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230ST 2.65

B96411 230 5 PACKH&L style 230 5 pack, includes 5 - 230 dirt bucket teeth and 5 - 23FP flex pins; Use Item # 230 5 PACK 15.99

D136045 TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230WT 3.61D140561 TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230WT 3.61D27748 CRIMP ON TOOTH H&L style heavy duty crimp on bucket tooth; Use Item #3CHXL 2.20D36720 CRIMP ON TOOTH H&L style heavy duty, crimp on dirt bucket tooth; Use Item #3CHXL 2.20D36729 CRIMP ON TOOTH H&L style heavy duty, crimp on dirt bucket tooth; Use Item #3CHXL 2.20D39090 DIRT TOOTH H&L style dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #24F 3.09D39093 FABRICATED TOOTH H&L style fabricated bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #23F 2.00D44193 FABRICATED TOOTH H&L style fabricated bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #23F 2.00D51388 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item # 270 8.16D51570 DIRT TOOTH H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230SP 3.09D51750 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98D55468 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06D55608 DIRT TOOTH H&L style dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.19D58592 CRIMP ON TOOTH H&L style heavy duty, crimp on dirt bucket tooth; Use Item #3CHXL 2.20D59702 STAR TOOTH H&L style star bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #252ST 3.20D79100 STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230ST 2.65D80119 TIGER TOOTH H&L style heavy duty tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.51ECOE34 CRIMP ON TOOTH Fabricated style scarifier/ripper crimp-on bucket tooth; Use Item # 1 3/4F 1.20K3871 FABRICATED TOOTH Fabricated style scarifier/ripper crimp on bucket tooth; Use Item #1 3/4F 1.20L32089 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06L55608 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.19R26685 DIRT TOOTH H&L style dirt bucket tooth for 250 series, takes a 25FP flex pin; Use Item #250 7.06R29116 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item # 270 8.16

R31915 DIRT TOOTHEsco style conical dirt bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #30S 5.95

R33815 SCARIFIER TOOTH Caterpillar style scarifier bucket tooth; Use Item # 2D5572 3.30


R35317 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; Use Item #18TL 2.43

R35707 DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 250 series; takes a 25-30PN pin and a 25-30LK lock; Use Item #25S 5.07

R38572 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; Use Item #18TL 2.43

R51388 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.16R54258 STAR TOOTH H&L style star bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240ST 4.20

S91259 DIRT TOOTHEsco style conical dirt bucket tooth for a 35 series, takes a 35PN pin and 35-40LK lock; Use Item #35S 9.26

S96431 DIRT TOOTHEsco style conical dirt bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #30S 5.95

T41166 CRIMP ON TOOTH H&L style crimp-on bucket tooth; Use Item #2AC 1.34X370WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 370 series, takes a P370 flex pin 21.56ZJZ00 CRIMP ON TOOTH H&L style crimp on dirt bucket tooth; Use Item #00SPS 0.51ZJZ156CTT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156WT 2.65ZJZ156SP DIRT TOOTH Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156 1.20ZJZ156ST TIGER TOOTH Hensley style tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156T 2.57ZJZ230P STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230ST 2.65ZJZ23W FLARE TOOTH H&L style flare bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230F 3.37ZJZ24W FLARE TOOTH H&L style flare bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240F 4.40ZJZ25W FLARE TOOTH H&L style flare bucket tooth for a 250 series, takes a 25FP flex pin; Use Item # 250F 6.82

Caterpillar Style PartsCaterpillar Style 5 Packs

1U3202 (5PK) 5 PACKS - DIRTCaterpillar style 1U3202 5 Pack, includes 5 - 1U3202 dirt bucket teeth, 5 - 9W7112 pins and 5 - 8E6209 sleeved retainers 16.00

1U3202WT-1U3202T (5PK) 5 PACKS - TWIN TIGER/TIGER

Caterpillar style 5 pack, 2 of 1U3202WT twin tiger bucket teeth, 3 of 1U3202T tiger bucket teeth, 5 - 9W7112 pins and 5 - 8E6209 sleeved retainers 17.85

1U3252 (5PK) 5 PACKS - DIRTCaterpillar style 1U3252 5 Pack, includes 5 - 1U3252 dirt bucket teeth, 5 - 9J2258 pins and 5 - 8E6259 sleeved retainers 32.00


Caterpillar style 5 pack, 2 of 1U3252WT twin tiger bucket teeth, 3 of 1U3252T tiger bucket teeth, 5 - 9J2258 pins and 5 - 8E6259 sleeved retainers 38.26

1U3302 (5PK) 5 PACKS - DIRTCaterpillar style 1U3302 5 pack, includes 5 - 1U3302 dirt bucket teeth, 5 - 9J2308 pins and 5 - 8E6259 sleeved retainers 46.55



1U3352 (5PK) 5 PACKS - DIRTCaterpillar style 1U3352 5 pack, includes 5 - 1U3352 dirt bucket teeth, 5 - 9J2358 pins and 5 - 8E6359 sleeved retainers 70.00



6Y3222 (5PK) 5 PACKS - DIRTCaterpillar style 6Y3222 5 Pack, includes 5 - 6Y3222 dirt bucket teeth, 5 - 6Y3228 pins and 5 - 3G9609 retainers 20.50

6Y3222WT-6Y3222T (5PK) 5 PACKS - TWIN TIGER/TIGER

Caterpillar style 5 pack, 2 of 6Y3222WT twin tiger bucket teeth, 3 of 6Y3222T tiger bucket teeth, 5 - 6Y3228 pins and 5 - 3G9609 retainers 25.09

Caterpillar Style Adapters & Adapter Covers107-3554 CENTER WELD ON ADAPTER Caterpillar center weld on adapter for a J550 series with a 2 1/2" lip thickness 92.81107-3555 RH WELD ON ADAPTER Caterpillar RH weld on adapter for a J550 series with a 2 1/2" lip thickness 95.46107-3556 LH WELD ON ADAPTER Caterpillar LH weld on adapter for a J550 series with a 2 1/2" lip thickness 95.46

114-0464 CENTER WELD ON ADAPTERCaterpillar style weld-on, 2 strap, center adapter for a front end loader and for a J460 series with a 2"lip thickness 46.30

114-0465 RH WELD ON ADAPTERCaterpillar style weld-on, 2 strap, right hand adapter for a front end loader and for a J460 series with a 2"lip thickness 45.70

114-0466 LH WELD ON ADAPTERCaterpillar style HD weld-on, 2 strap, left hand adapter for a J460 series and for a front end loader with a 2" lip thickness 45.45

119-3204 CENTER WELD ON ADAPTERCaterpillar style weld-on, center adapter for an excavator and for a J200 series with a 1" lip thickness 3.31

119-3205 CENTER WELD ON ADAPTERCaterpillar style weld-on, center adapter for an excavator and for a J200 series with a 3/4" lip thickness 3.31

119-3253 WELD ON ADAPTERCaterpillar style weld on adapter for an excavator and for a J250 series with a 1 1/4" lip thickness; Use Item #6Y3254 7.72

119-8604 CENTER ADAPTER Caterpillar style center weld on adapter 156.53119-8605 RH ADAPTER Caterpillar style right hand weld on adapter 158.73119-8606 LH ADAPTER Caterpillar style left hand weld on adapter 158.73125-8404 CENTER WELD ON ADAPTER Caterpillar style weld-on, 2 strap, center adapter for a J400 series with a 1 3/4" lip thickness 41.23125-8405 RH WELD ON ADAPTER Caterpillar style weld-on, right hand, 2 strap adapter for a J400 series with a 1 3/4" lip thickness 42.90125-8406 LH WELD ON ADAPTER Caterpillar style weld-on, left hand, 2 strap adapter for a J400 series with a 1 3/4" lip thickness 42.90

133-0704 WELD ON ADAPTERCaterpillar style adapter with a 3 1/16" lip thickness for a J700 series bucket tooth; Use Item # 4T4704 169.00

159-0464 CENTER WELD ON ADAPTERCaterpillar style center, weld on excavator adapter for a J450 series with a 2" lip thickness; Use Item #6I6464 42.55

159-0465 RH WELD ON ADAPTERCaterpillar style right hand, weld-on excavator adapter for a J450 series with a 2" lip thickness; Can Use Item #6I6465 or #8E2465 40.79

159-0466 LH WELD ON ADAPTERCaterpillar style left hand, weld-on excavator adapter for a J450 series with a 2" lip thickness; Can Use Item #6I6466 or #8E2466 41.78

165-9288 RH WELD ON ADAPTERCaterpillar style weld-on, 2 strap, right hand adapter for a front end loader and for a J460 series with a 2"lip thickness; Use Item # 114-0465 45.70

165-9289 LH WELD ON ADAPTERCaterpillar style HD weld-on, 2 strap, left hand adapter for a J460 series and for a front end loader with a 2" lip thickness; Use Item # 114-0466 45.45

167-2476 RH WELD ON ADAPTERCaterpillar style weld-on, 2 strap, right hand adapter for a front end loader and for a J460 series with a 2"lip thickness; Use Item # 114-0465 45.70


167-2477 LH WELD ON ADAPTERCaterpillar style HD weld-on, 2 strap, left hand adapter for a J460 series and for a front end loader with a 2" lip thickness; Use Item # 114-0466 45.45

170-0073 BOLT ON ADAPTERCaterpillar style bolt on loader adapter with a 1 1/4" lip thickness; takes 2 - 1 1/4" x 4 1/2" plow bolts and 2 - 1 1/4" cone nuts; Use Item #3G7357 41.23

1U-257 BOLT ON ADAPTERCaterpillar style bolt-on loader adapter for a J250 series with a 1" lip thickness; takes 2 - 1" X 3 3/4" plow bolts and 2 - 1" hex nuts; Use Item # 1U0257 17.20

1U-307 BOLT ON ADAPTERCaterpillar style bolt-on loader adapter for a J300 series with a 1" lip thickness; takes 2 - 1" X 4" plow bolts and 2 - 1" hex nuts; Use Item # 1U0307 28.44

1U0257 BOLT ON ADAPTERCaterpillar style bolt-on loader adapter for a J250 series with a 1" lip thickness; takes 2 - 1" X 3 3/4" plow bolts and 2 - 1" hex nuts 17.20

1U0307 BOLT ON ADAPTERCaterpillar style bolt-on loader adapter for a J300 series with a 1" lip thickness; takes 2 - 1" X 4" plow bolts and 2 - 1" hex nuts 28.44

1U0307-SB BOLT ON ADAPTERCaterpillar style SBIC bolt-on loader adapter for a J300 series with a 1" lip thickness; takes 2 - 1" X 4" plow bolts and 2 - 1" hex nuts 20.40

1U0741 ADAPTER COVERCaterpillar style adapter cover, takes 2 - 1U1558 pins and 2 - 8E5559 sleeved retainers; Use Item # 8E9543 47.28

1U1254 FLUSH MOUNT ADAPTERCaterpillar style flush mount, weld-on loader or excavator adapter for a J250 series with a 3/4" - 1 1/4" lip thickness 12.83

1U1304 FLUSH MOUNT ADAPTERCaterpillar style flush mount, weld-on loader adapter for a J300 series with a 1" - 1 1/2" lip thickness 20.90

1U1350 WELD ON ADAPTERCaterpillar style bottom strap, weld-on loader adapter for a J350 series with a 1 1/4" - 1 3/4" lip thickness 20.94

1U1354 FLUSH MOUNT ADAPTERCaterpillar style flush mount, weld-on loader adapter for a J350 series with a 1 1/4" - 1 3/4" lip thickness 29.99

1U1357 CENTER BOLT ON ADAPTERCaterpillar style bolt-on, center loader adapter for a J350 series with a 1 3/4" lip thickness; takes 2 - 1 1/4" X 5" plow bolts and 2 - 1 1/4" cone nuts 43.65

1U1358 LH BOLT ON ADAPTERCaterpillar style bolt-on, left hand loader adapter for a J350 series with a 1 3/4" lip thickness; takes 2 - 1 1/4" X 5" plow bolts and 2 - 1 1/4" cone nuts 57.32

1U1359 RH BOLT ON ADAPTERCaterpillar style bolt-on, right hand loader adapter for a J350 series with a 1 3/4" lip thickness; takes 2 - 1 1/4" X 5" plow bolts and 2 - 1 1/4" cone nuts 57.32

1U1553 WELD ON ADAPTERCaterpillar style weld-on loader or excavator adapter for a J550 series with a 2 1/2" lip thickness; Use Item # 6I6554 72.75

1U1554 WELD ON ADAPTER Caterpillar style adapter for a J550 series bucket tooth with a 2 1/2" lip thickness 60.41

1U1555 WELD ON ADAPTERCaterpillar style right hand adapter for a J550 series bucket tooth with a 2 1/2" lip thickness; Use Item # 6I6555 64.10

1U1556 WELD ON ADAPTERCaterpillar style left hand adapter for a J550 series bucket tooth with a 2 1/2" lip thickness; Use Item # 6I6556 64.20

1U1888 LH CORNER ADAPTERCaterpillar style left hand, 1 bolt corner loader adapter for a J350 series with a 1 1/4" - 1 1/2" lip thickness; takes a 1 1/4" X 4" plow bolt and a 1 1/4" cone nut; Use Item # 3G5358 44.09

1U1889 RH CORNER ADAPTERCaterpillar style right hand, 1 bolt corner loader adapter for a J350 series with a 1 1/4" - 1 1/2" lip thickness; takes a 1 1/4" X 4" plow bolt and a 1 1/4" cone nut; Use Item # 3G5359 44.09

1U2208 LH CORNER ADAPTERCaterpillar style left hand, J200 series, bolt corner adapter for a loader with a 3/4" lip thickness; takes 1 - 7/8" x 2 3/4" plow bolt and 1 - 7/8" hex nut 9.04

1U2209 RH CORNER ADAPTERCaterpillar style right hand, J200 series, bolt corner adapter for a loader with a 3/4" lip thickness; takes 1 - 7/8" x 2 3/4" plow bolt and 1 - 7/8" hex nut 9.04

1U4207 BOLT ON ADAPTERCaterpillar style bolt on, loader adapter for a J200 series with a 3/4" lip thickness; takes 2 - 3/4" x 2 3/4" plow bolts and 2 - 3/4" hex nuts; Use Item # 9J4207 6.92

3G0169 WELD ON ADAPTERCaterpillar style bottom strap, weld on adapter for a J250 series loader or excavator with a 1" - 1 1/4" lip thickness 9.03

3G1357 BOLT ON ADAPTERCaterpillar style 3 bolt hole loader adapter for a J350 series with a 1 1/4" lip thickness; takes 3 - 1" x 4" plow bolts and 3 - 1" cone nuts 40.79

3G2357 BOLT ON ADAPTERCaterpillar style 3 bolt hole loader adapter for a J350 series with a 1 3/4" lip thickness; takes 3 - 1" x 4" plow bolts and 3 - 1" cone nuts 35.27

3G3357 BOLT ON ADAPTERCaterpillar style 2 bolt hole loader adapter for a J350 series with a 1 1/2" lip thickness; takes 2 - 1" X 3 1/4" plow bolts and 2 - 1" cone nuts 43.21

3G3357-SB BOLT ON ADAPTERCaterpillar style SBIC 2 bolt hole adapter for a J350 series bucket tooth with a 1.5" lip thickness, takes a 1" x 3 1/4" plow bolt and a 1" cone nut 40.60

3G4258 LH CORNER ADAPTERCaterpillar style left hand, 1 bolt corner loader adapter for a J250 series with a 1" lip thickness; takes a 1" X 3 1/4" plow bolt and a 1" cone nut 21.16

3G4259 RH CORNER ADAPTERCaterpillar style right hand, 1 bolt corner loader adapter for a J250 series with a 1" lip thickness; takes a 1" X 3 1/4" plow bolt and a 1" cone nut 21.16

3G4307 BOLT ON ADAPTERCaterpillar style bolt on loader adapter for a J300 series with a 1 1/4" lip thicknesstakes 2 - 1" x 4" plow bolts and 2 - 1" cone nuts; Use Item # 4T4307 27.78

3G4308 LH CORNER ADAPTERCaterpillar style left hand, 1 bolt corner loader adapter for a J300 series with a 1 - 1 1/4" lip thickness; takes a 1 1/4" X 4" plow bolt and a 1 1/4" cone nut 33.29

3G4309 RH CORNER ADAPTERCaterpillar style right hand, 1 bolt corner loader adapter for a J300 series with a 1" - 1 1/4" lip thickness; takes a 1 1/4" X 4" plow bolt and a 1 1/4" cone nut 33.29

3G5307 BOLT ON ADAPTERCaterpillar style corner bolt on loader adapter for a J300 with a 1 1/4" lip thickness; takes 3 - 1" x 4" plow bolts and 3 - 1" cone nuts 31.30

3G5358 LH CORNER ADAPTERCaterpillar style left hand, 1 bolt corner loader adapter for a J350 series with a 1 1/4" - 1 1/2" lip thickness; takes a 1 1/4" X 4" plow bolt and a 1 1/4" cone nut 44.09

3G5359 RH CORNER ADAPTERCaterpillar style right hand, 1 bolt corner loader adapter for a J350 series with a 1 1/4" - 1 1/2" lip thickness; takes a 1 1/4" X 4" plow bolt and a 1 1/4" cone nut 44.09

3G6304HD CENTER WELD ON ADAPTERCaterpillar style HD center weld-on excavator or loader adapter for a J300 series with a 1 1/4" lip thickness 15.41

3G6305 RH WELD ON ADAPTERCaterpillar style weld-on, right hand, corner excavator or loader adapter for a J300 series with a 1 1/4" lip thickness 16.54

3G6306 LH WELD ON ADAPTERCaterpillar style weld-on, left hand, corner excavator or loader adapter for a J300 series with a 1 1/4" lip thickness 16.54

3G7357 BOLT ON ADAPTERCaterpillar style bolt-on loader adapter for a J350 series with a 1 1/4" lip thickness; takes 2 - 1 1/4" X 4 1/2" plow bolts and 2 - 1 1/4" cone nuts 41.23


3G8308 CORNER ADAPTERCaterpillar style 1 bolt, weld on, left hand corner loader adapter for a J300 series with a 1 1/4" lip thickness; takes 1 - 1 1/4" x 4" plow bolt and 1 - 1 1/4" hex nut 40.34

3G8309 CORNER ADAPTERCaterpillar style 1 bolt, right hand, weld on corner loader adapter for a J300 series with a 1 1/4" lip thickness; takes 1 - 1 1/4" x 4" plow bolt and 1 - 1 1/4" hex nut 40.34

3G8354HD CENTER WELD ON ADAPTERCaterpillar style center, weld-on excavator or loader adapter for a J350 series with a 1 1/2" lip thickness 20.41

3G8355 RH WELD ON ADAPTERCaterpillar style weld-on, right hand, corner excavator or loader adapter for a J350 series with a 1 1/2" lip thickness 18.30

3G8356 LH WELD ON ADAPTERCaterpillar style weld-on, left hand, corner excavator or loader adapter for a J350 series with a 1 1/2" lip thickness 20.28

3G9307 BOLT ON ADAPTER

Caterpillar style bolt on center loader adapter with a 1 1/4" lip thickness for a J300 series bucket tooth, takes a 9J2308 pin and an 8E6259 sleeved retainer; takes 2 - 1 1/4" x 5" plow bolts and 2 - 1 1/4" cone nuts 30.64

3G9494 CENTER WELD ON ADAPTERCaterpillar style weld-on, 2 strap, center excavator or loader adapter for a J550 series with a 2 1/2" lip thickness; Use Item #107-3554 74.96

3G9495 RH WELD ON ADAPTERCaterpillar style weld-on, 2 strap, right hand corner excavator or loader adapter for a J550 series with a 2 1/2" lip thickness; Use Item #107-3555 74.96

3G9496 LH WELD ON ADAPTERCaterpillar style weld-on, 2 strap, left hand, corner excavator or loader adapter for a J550 series with a 2 1/2" lip thickness; Use Item #107-3556 74.96

4T1204 FLUSH MOUNT ADAPTER Caterpillar style flush mount loader adapter for a J200 series with a 1/2" - 1" lip thickness 4.65

4T4307 BOLT ON ADAPTERCaterpillar style bolt on loader adapter for a J300 series with a 1 1/4" lip thickness; takes 2 - 1" x 4" plow bolts and 2 - 1" cone nuts 27.78

4T4704 WELD ON ADAPTER Caterpillar style adapter with a 3 1/16" lip thickness for a J700 series bucket tooth 169.004T4705 RH WELD ON ADAPTER Caterpillar style RH right hand adapter with a 3 1/16" lip thickness for a J700 series bucket tooth 149.914T4706 LH WELD ON ADAPTER Caterpillar style LH right hand adapter with a 3 1/16" lip thickness for a J700 series bucket tooth 149.91

4T5805 BOLT ON ADAPTERCaterpillar style bolt on adapter for a J300 series; takes 2 - 7/8" X 4 1/2" plow bolts and 2 - 7/8" cone nuts 24.07

6I6354 CENTER WELD ON ADAPTER Caterpillar style weld on, center excavator adapter for a J350 series with a 1 1/2" lip thickness 21.16

6I6355 RH WELD ON ADAPTERCaterpillar style weld on, right hand, excavator adapter for a J350 series with a 1 1/2" lip thickness 21.16

6I6356 LH WELD ON ADAPTER Caterpillar style weld on, left hand, excavator adapter for a J350 series with a 1 1/2" lip thickness 21.166I6404 CENTER WELD ON ADAPTER Caterpillar style weld on, center adapter for a J400 series with a 1 3/4" lip thickness 30.64

6I6404-SB CENTER WELD ON ADAPTERCaterpillar style SBIC weld on, center excavator adapter for a J400 series with a 1 3/4" lip thickness 27.89

6I6405 RH CORNER ADAPTERCaterpillar style right hand, weld on, corner excavator adapter for a J400 series with a 1 3/4" lip thickness 28.66

6I6406 LH CORNER ADAPTERCaterpillar style left hand, weld on, corner excavator adapter for a J400 series with a 1 3/4" lip thickness 28.66

6I6464 CENTER WELD ON ADAPTERCaterpillar style weld on, center excavator adapter for a J450 series with a 2" lip thickness; Can Use Item #159-0464 45.86

6I6465 RH CORNER ADAPTERCaterpillar style weld on, right hand, corner excavator adapter for a J450 series with a 2" lip thickness; Can Use Item #159-0465 or #8E2465 41.78

6I6466 LH CORNER ADAPTERCaterpillar style weld on, left hand, corner excavator adapter for a J450 series with a 2" lip thickness; Can Use Item #159-0466 or #8E2466 41.78

6I6554 CENTER WELD ON ADAPTER Caterpillar style weld on, center excavator adapter for a J550 series with a 2.36" lip thickness 72.75

6I6555 WELD ON ADAPTERCaterpillar style right hand, weld on adapter with a 2 1/2" lip thickness for a J550 series bucket tooth 64.10

6I6556 WELD ON ADAPTERCaterpillar style left hand, weld on adapter with a 2 1/2" lip thickness for a J550 series bucket tooth 64.20

6I6604HD CENTER WELD ON ADAPTERCaterpillar style weld on, heavy duty, center excavator adapter for a J600 series with a 2 3/4" lip thickness 120.81

6I8243 RH CORNER ADAPTERCaterpillar style weld on, right hand, 2 bolt corner loader adapter for a J400 series with a 1 3/4" lip thickness; takes 2 - 1 1/4" X 5" plow bolts and 2 - 1 1/4" cone nuts 84.66

6I8244 LH CORNER ADAPTERCaterpillar style weld on, left hand, 2 bolt corner loader adapter for a J400 series with a 1 3/4" lip thickness; takes 2 - 1 1/4" X 5" plow bolts and 2 - 1 1/4" cone nuts 84.66

6I8249 RH CORNER ADAPTER Caterpillar style right hand, weld-on corner adapter with a 1" lip thickness for a J400 series 31.976I8250 LH CORNER ADAPTER Caterpillar style left hand, bolt on corner adapter with a 1" lip thickness for a J400 series 33.336I8804 WELD ON ADAPTER Caterpillar style weld on J800 adapter with a 4" lip thickness 112.00

6I9250 LH CORNER ADAPTERCaterpillar style 2 bolt, left hand, corner loader adapter for a J250 series with a 1" lip thickness; takes 2 - 1" X 3" plow bolts and 2 - 1" cone nuts 29.54

6I9251 RH CORNER ADAPTERCaterpillar style 2 bolt, right hand, corner loader adapter for a J250 series with a 1" lip thickness; takes 2 - 1" X 3" plow bolts and 2 - 1" cone nuts 29.54

6I9898 BOLT ON ADAPTERCaterpillar style 2 bolt, center loader adapter for a J400 with a 1 3/4" lip thickness; takes 2 - 125x500 plow bolts and 2 - 125 cone nuts 63.93

6K-6897 WELD ON ADAPTER Hensley style weld on adapter for a 400 series with a 2" lip thickness; Use Item #X802-400 45.08

6U6404 CENTER WELD ON ADAPTERCaterpillar style weld on, center adapter for a J400 series with a 1 3/4" lip thickness; Use Item # 6I6404 30.64

6Y0469 BOLT ON ADAPTERCaterpillar style 2 bolt hole loader adapter for a J350 series with a 1 1/2" lip thickness; takes 2 - 1" X 3 1/4" plow bolts and 2 - 1" cone nuts; Use Item # 3G3357 43.21

6Y3224 WELD ON ADAPTER Caterpillar style weld-on, excavator adapter for a J225 series with a .85" lip thickness 5.736Y3254 CENTER WELD ON ADAPTER Caterpillar style weld on, center excavator adapter for a J250 series with a 1 1/4" lip thickness 7.72

6Y3254-1 1/4-SB WELD ON ADAPTERCaterpillar style SBIC weld on, center excavator adapter for a J250 series with a 1 1/4" lip thickness 8.40

7703990 WELD ON ADAPTERH&L style weld on, wrap around adapter with a 1" lip thickness for a 23 series bucket tooth; Use Item #2740AW23 3.77

7J3354 WELD ON ADAPTERCaterpillar style weld on adapter for a J350 series with a 1 1/2" lip thickness; Use Item # 3G8354HD 20.41

7J3355 RH WELD ON ADAPTERCaterpillar style weld on, right hand corner adapter for a J350 series with a 1 1/2" lip thickness; Use Item # 3G8355 18.30

7J3356 LH WELD ON ADAPTERCaterpillar style weld on, left hand corner adapter for a J350 series with a 1 1/2" lip thickness; Use Item # 3G8356 20.28


7J9554 FLUSH MOUNT ADAPTERCaterpillar style flush mount, weld on, loader adapter for a J550 series with a 2" - 2 1/2" lip thickness 77.82

7T-3305 RH WELD ON ADAPTERCaterpillar style weld-on, right hand, corner excavator adapter for a J300 series with a 1 1/4" lip thickness; Use Item # 3G6305 16.54

7T-3306 LH WELD ON ADAPTERCaterpillar style weld-on, left hand, corner excavator adapter for a J300 series with a 1 1/4" lip thickness; Use Item # 3G6306 16.54

7T-3405 RH CORNER ADAPTERCaterpillar style right hand, weld on, corner excavator adapter for a J400 series with a 1 3/4" lip thickness; Use Item # 6I6405 28.66

7T-3406 LH CORNER ADAPTERCaterpillar style left hand, weld on, corner excavator adapter for a J400 series with a 1 3/4" lip thickness; Use Item # 6I6406 28.66

7T-8454 CENTER WELD ON ADAPTERCaterpillar style flush mount, center, weld-on loader adapter for a J450 series with a 1 3/4" - 2" lip thickness; Use Item # 8E0464 52.02

7T-8455 RH WELD ON ADAPTERCaterpillar style flush mount, weld on, right hand loader adapter for a J450 series with a 1 3/4" - 2" lip thickness; Use Item # 8E0465 54.23

7T-8456 LH WELD ON ADAPTERCaterpillar style flush mount, weld on, left hand loader adapter for a J450 series with a 1 3/4" - 2" lip thickness; Use Item # 8E0466 54.23

7T3305 RH WELD ON ADAPTERCaterpillar style weld on, right hand corner adapter for a J300 series with a 1 1/4" lip thickness; Use Item # 3G6305 16.54

7T3306 LH WELD ON ADAPTERCaterpillar style weld on, left hand corner adapter for a J300 series with a 1 1/4" lip thickness; Use Item # 3G6306 16.54

7T3404 WELD ON ADAPTERCaterpillar style weld on, excavator or loader adapter for a J400 series with a 1 3/4" lip thickness; Use Item #6I6404 30.64

7T8454 CENTER WELD ON ADAPTERCaterpillar style flush mount, center, weld-on loader adapter for a J450 series with a 1 3/4" - 2" lip thickness; Use Item # 8E0464 52.02

7Y0254 WELD ON ADAPTER Caterpillar style weld on adapter for a J250 series with a 1 1/4" lip thickness; Use Item # 6Y3254 7.72

8E0464 CENTER WELD ON ADAPTERCaterpillar style flush mount, center, weld-on loader adapter for a J450 series with a 1 3/4" - 2" lip thickness 52.02

8E0465 RH WELD ON ADAPTERCaterpillar style flush mount, weld on, right hand loader adapter for a J450 series with a 1 3/4" - 2" lip thickness 54.23

8E0466 LH WELD ON ADAPTERCaterpillar style flush mount, weld on, left hand loader adapter for a J450 series with a 1 3/4" - 2" lip thickness 54.23

8E2184 BOLT ON ADAPTERCaterpillar style bolt on, loader adapter for a J200 series with a .8" lip thickness; takes 2 - 5/8" x 2 1/2" plow bolts and 2 - 5/8" hex nuts 5.07

8E2465 RH WELD ON ADAPTERCaterpillar style right hand, corner weld-on excavator adapter for a J450 series with a 2" lip thickness 40.79

8E2466 LH WELD ON ADAPTERCaterpillar style left hand, corner weld-on excavator adapter for a J450 series with a 2" lip thickness 41.23

8E2467 CENTER BOLT ON ADAPTERCaterpillar style center, bolt on, loader adapter for a J450 series with a 1 3/4" lip thickness; takes 2 - 1 1/4" x 5" plow bolts and 2 - 1 1/4" cone nuts 57.01

8E3464 CENTER WELD ON ADAPTERCaterpillar style weld-on, 2 strap, center adapter for a front end loader for a J460 series with a 2"lip thickness; Use Item #114-0464 46.30

8E3465 RH WELD ON ADAPTERCaterpillar style weld-on, 2 strap, right hand adapter for a front end loader for a J460 series with a 2" lip thickness; Use Item #114-0465 45.70

8E3466 LH WELD ON ADAPTERCaterpillar style weld-on, 2 strap, left hand adapter for a front end loader for a J460 series with a 2" lip thickness; Use Item #114-0466 45.45

8E5308 LH BOLT ON ADAPTERCaterpillar style left hand, bolt on loader adapter for a J300 series with a 1" - 1 1/4" lip thickness; takes 2 - 125 X 450 bolts and 2 - 125 cone nuts 44.09

8E5309 RH BOLT ON ADAPTERCaterpillar style right hand, bolt on, loader adapter for a J300 series with a 1" - 1 1/4" lip thickness; takes 2 - 125 X 450 bolts and 2 - 125 cone nuts 44.09

8E5358 LH BOLT ON ADAPTERCaterpillar style left hand, corner, bolt on, loader adapter for a J350 series with a 1 1/4" - 1 1/2" lip thickness; takes 2 125 X 500 bolts and 2 - 125 cone nuts 63.93

8E5359 RH BOLT ON ADAPTERCaterpillar style right hand, corner, bolt on, loader adapter for a J350 series with a 1 1/4" - 1 1/2" lip thickness; takes 2 - 125 X 500 bolts and 2 - 125 cone nuts 63.93

8E6464 WELD ON ADAPTERCaterpillar style weld on, center excavator adapter for a J450 series with a 2" lip thickness; Use Item # 6I6464 46.30

8E6464-SB ADAPTER Caterpillar style SBIC weld on excavator or loader adapter for a J450 series with a 2" lip thickness 43.98

8E6465 RH WELD ON ADAPTERCaterpillar style right hand, weld-on, corner excavator or loader adapter with a 2" lip thickness for a J450 series; Use Item #8E2465 40.79

8E6466 LH WELD ON ADAPTERCaterpillar style left hand, weld-on, corner excavator or loader adapter with a 2" lip thickness for a J450 series; Use Item #8E2466 41.23

8E9490 WELD ON ADAPTERCaterpillar style weld-on excavator adapter for a J300 series bucket tooth with a 1.42" lip thickness 15.06

8E9543 ADAPTER COVERCaterpillar style adapter cover, takes 2 - 1U1558 pins and 2 - 8E5559 sleeved retainers; Same as a 1U0741 47.28

8J1454 CENTER WELD ON ADAPTERCaterpillar style flush mount, center, weld-on loader adapter for a J450 series with a 1 3/4" - 2" lip thickness; Use Item # 8E0464 52.02

8J3354 FLUSH MOUNT ADAPTERCaterpillar style flush mount, weld-on loader adapter for a J350 series with a 1 1/4" - 1 3/4" lip thickness; Use Item # 1U1354 29.99

8J4310 RH WELD ON ADAPTERCaterpillar style weld-on, right hand, corner excavator adapter for a J350 series with a 1 1/2" lip thickness; Use Item # 3G8355 18.30

8J4311 LH WELD ON ADAPTERCaterpillar style weld-on, left hand, corner excavator adapter for a J350 series with a 1 1/2" lip thickness; Use Item # 3G8356 20.28

8J4312 WELD ON ADAPTERCaterpillar style weld on center adapter with a 1 1/4" lip thickness for a J300 series bucket tooth, takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 3G9307 30.64

8J5357 BOLT ON ADAPTERCaterpillar style 3 bolt hole loader adapter for a J350 series with a 1 3/4" lip thickness; takes 3 - 1" x 4" plow bolts and 3 - 1" cone nuts; Use Item # 3G2357 35.27

8J6587 BOLT ON ADAPTERCaterpillar style bolt-on loader adapter for a J300 series with a 1" lip thickness; takes 2 - 1" X 4" plow bolts and 2 - 1" hex nuts; Use Item # 1U0307 28.44

8J6656 BOLT ON ADAPTERCaterpillar style bolt-on loader adapter for a J250 series with a 1" lip thickness; takes 2 - 1" X 3 3/4" plow bolts and 2 - 1" hex nuts; Use Item # 1U0257 17.20


8J7525 WELD ON ADAPTERCaterpillar style weld-on, bottom strap, loader adapter for a J200 series with a 1/2" - 3/4" lip thickness 3.09

9J0172 RH WELD ON ADAPTER Caterpillar style right hand, weld on adapter with a 2 1/2" lip thickness; Use Item # 6I6555 64.109J0173 LH WELD ON ADAPTER Caterpillar style left hand, weld on adapter with a 2 1/2" lip thickness; Use Item # 6I6556 64.20

9J0174 CENTER WELD ON ADAPTERCaterpillar style weld on, center excavator adapter for a J550 series with a 2.36" lip thickness; Use Item # 6I6554 72.75

9J2307 BOLT ON ADAPTER Caterpillar style bolt on J300 adapter for a 613 pan with a 1 1/8" lip thickness 26.40


9J2357 BOLT ON ADAPTERCaterpillar style 3 bolt hole loader adapter for a J350 series with a 1 1/4" lip thickness, takes 3 - 1" x 4" plow bolts and 3 - 1" hex nuts; Use Item # 3G1357 40.79

9J2826 CENTER WELD ON ADAPTERCaterpillar style HD center weld-on excavator adapter for a J300 series with a 1 1/4" lip thickness; Use Item # 3G6304HD 15.41

9J4207 BOLT ON ADAPTERCaterpillar style bolt on, loader adapter for a J200 series with a 3/4" lip thickness; takes 2 - 3/4" x 2 3/4" plow bolts and 2 - 3/4" hex nuts 6.92

9J4254 FLUSH MOUNT ADAPTERCaterpillar style flush mount, weld-on loader adapter for a J250 series with a 3/4" - 1 1/4" lip thickness; Use Item # 1U1254 12.83

9J4297 WELD ON ADAPTERCaterpillar style bottom strap, weld-on loader adapter for a J350 series with a 1 1/4" - 1 3/4" lip thickness; Use Item # 1U1350 20.94

9J4304 FLUSH MOUNT ADAPTERCaterpillar style flush mount, weld-on loader adapter for a J300 series with a 1" - 1 1/2" lip thickness; Use Item # 1U1304 20.90


9J8455 BOLT ON ADAPTERCaterpillar style bolt on, ripper shank for a R300 series, takes 2 - 3/4" x 3 3/4" plow bolts and 2 - 3/4" hex nuts 14.99

9J8929 WELD ON ADAPTERCaterpillar style bottom strap, weld on, loader or excavator adapter with a 1" to 1 1/4" lip thickness 17.64

9J9584 WELD ON ADAPTER Caterpillar style weld on, flush mount adapter with a 3/4" lip thickness 52.88

9W1304 CENTER WELD ON ADAPTERCaterpillar style center, weld on, excavator adapter for a J300 series with a 1 1/4" lip thickness; Use Item #3G6304HD 15.41

9W9971 BOLT ON ADAPTERCaterpillar style bolt on adapter for a J350 series, takes 2 - 1" x 5 1/2" plow bolts and 2 - 1" hex nuts 30.80

L3283-24 BOLT ON ADAPTER H&L style bolt on adapter 10.00Caterpillar Style Assemblies

RK202 WELD ON ASSEMBLYCaterpillar style 1" lip weld on excavator assembly for a J200 series, takes a 119-3204 weld on adapter, a 1U3202 standard dirt bucket tooth, a 9W7112 pin and an 8E6209 retainer 6.62

RK202T WELD ON ASSEMBLYCaterpillar style 1" lip weld on excavator assembly for a J200 series, takes a 119-3204 weld on adapter, a 1U3202T tiger bucket tooth, a 9W7112 pin and an 8E6209 retainer 6.71

RK202WTL WELD ON ASSEMBLYCaterpillar style 1" lip weld on excavator assembly for a J200 series, takes a 119-3204 weld on adapter, a 1U3202WT twin tiger bucket tooth, a 9W7112 pin and an 8E6209 retainer 7.39

RK302 WELD ON ASSEMBLYCaterpillar style 1 1/4" lip weld on excavator assembly for a J300 series, takes a 3G6304HD weld on adapter, a 1U3302 standard dirt bucket tooth, a 9J2308 pin and an 8E6259 retainer 25.64

RK302F WELD ON ASSEMBLYCaterpillar style 1 1/4" lip weld on excavator assembly for a J300 series, takes a 3G6304HD weld on adapter, a 1U3302F flare bucket tooth, a 9J2308 pin and an 8E6259 retainer 28.05

RK302TL WELD ON ASSEMBLYCaterpillar style 1 1/4" lip weld on excavator assembly for a J300 series, takes a 3G6304HD weld on adapter, a 1U3302TL tiger bucket tooth, a 9J2308 pin and an 8E6259 retainer 26.06

RK302WTL WELD ON ASSEMBLYCaterpillar style 1 1/4" lip weld on excavator assembly for a J300 series, takes a 3G6304HD weld on adapter, a 1U3302WTL twin tiger bucket tooth, a 9J2308 pin and an 8E6259 retainer 27.16

RK352 WELD ON ASSEMBLYCaterpillar style 1 1/2" lip weld on excavator assembly for a J350 series, takes a 3G8354HD weld on adapter, a 1U3352 standard dirt bucket tooth, a 9J2358 pin and an 8E6359 retainer 35.43

RK352F WELD ON ASSEMBLYCaterpillar style 1 1/2" lip weld on excavator assembly for a J350 series, takes a 3G8354HD weld on adapter, a 1U3352F flare bucket tooth, a 9J2358 pin and an 8E6359 retainer 35.43

RK352TL WELD ON ASSEMBLYCaterpillar style 1 1/2" lip weld on excavator assembly for a J350 series, takes a 3G8354HD weld on adapter, a 1U3352TL tiger bucket tooth, a 9J2358 pin and an 8E6359 retainer 32.45

RK352WTL WELD ON ASSEMBLYCaterpillar style 1 1/2" lip weld on excavator assembly for a J350 series, takes a 3G8354HD weld on adapter, a 1U3352WTL twin tiger bucket tooth, a 9J2358 pin and an 8E6359 retainer 35.87

RK452 WELD ON ASSEMBLYCaterpillar style 2" lip weld on excavator assembly for a J450 series, takes an 8E6464 weld on adapter, a 1U3452 standard dirt bucket tooth, an 8E0468 pin and an 8E8469 retainer 87.10

RK452F WELD ON ASSEMBLYCaterpillar style 2" lip weld on excavator assembly for a J450 series, takes an 8E6464 weld on adapter, a 1U3452F flare bucket tooth, an 8E0468 pin and an 8E8469 retainer 97.22

RK452TL WELD ON ASSEMBLYCaterpillar style 2" lip weld on excavator assembly for a J450 series, takes an 8E6464 weld on adapter, a 1U3452TL tiger bucket tooth, an 8E0468 pin and an 8E8469 retainer 87.10

RK452WTL WELD ON ASSEMBLYCaterpillar style 2" lip weld on excavator assembly for a J450 series, takes an 8E6464 weld on adapter, a 1U3452WTL twin tiger bucket tooth, an 8E0468 pin and an 8E8469 retainer 87.10

RK552 WELD ON ASSEMBLYCaterpillar style 2 1/2" lip weld on excavator assembly for a J550 series, takes a 3G9494 weld on adapter, a 1U3552 standard dirt bucket tooth, a 1U1558 pin and an 8E5559 retainer 119.47

RK552TL WELD ON ASSEMBLYCaterpillar style 2 1/2" lip weld on excavator assembly for a J550 series, takes a 3G9494 weld on adapter, a 1U3552TL tiger bucket tooth, a 1U1558 pin and an 8E5559 retainer 119.47

RK552WTL WELD ON ASSEMBLYCaterpillar style 2 1/2" lip weld on excavator assembly for a J550 series, takes a 3G9494 weld on adapter, a 1U3552WTL twin tiger bucket tooth, a 1U1558 pin and an 8E5559 retainer 119.47

RK6I6602 WELD ON ASSEMBLYCaterpillar style 2 3/4" lip weld on excavator assembly for a J600 series, takes a 6I6604HD weld on adapter, a 6I6602 standard dirt bucket tooth, a 6I6608 pin and a 6I6609 retainer 180.00

RK6Y WELD ON ASSEMBLYCaterpillar style 1" lip weld on excavator assembly for a J220 series, takes a 6Y3224 weld on adapter, a 6Y3222 standard dirt bucket tooth, a 6Y3228 pin and an 8E6259 retainer 12.50

Caterpillar Style Base Edges & Plates, Scraper & Retainer Bars

105-2345 BASE EDGE

Caterpillar style bolt on base edge with segment holes for a 938 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1” thick, 9.65” wide and 105.55” in length. It has 28 bolt holes. 256.10

111-9770 BASE EDGECaterpillar style bolt on base edge with segment holes for a 980G Caterpillar Front End Loader. This is a base edge that is 1.75" thick, 12" wide and 134.06" in length.

141-4847 BASE EDGECaterpillar style bolt on base edge with segment holes for a 950G Caterpillar Front End Loader. This is a base edge that is 1.25" thick, 11 1/8" wide and 115" in length.

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)141-7407 SCRAPER BAR Caterpillar style scraper bar 9.24194-2009 BASE PLATE Caterpillar style compactor base plate 22.00

1 X 8 X 12BASE BASE EDGE

Caterpillar style bolt on base edge for a Caterpillar Front End Loader. This is a base edge that is 1” thick, 8” wide and 144” in length. The bolt hole spacing is 6” from center to center of the bolt holes, and 3” when measured from the edge of the bucket cutting edge to the center of the first hole. 317.46

3/4 X 6 X 14BASE BASE EDGE

Caterpillar style bolt on base edge for a Caterpillar Front End Loader. This is a base edge that is 3/4” thick, 6” wide and 168” in length. The bolt hole spacing is 6” from center to center of the bolt holes, and 3” when measured from the edge of the bucket cutting edge to the center of the first hole. 207.23

3/4 X 8 X 14BASE BASE EDGE

Caterpillar style bolt on base edge for a Caterpillar Front End Loader. This is a base edge that is 3/4” thick, 8” wide and 168” in length. The bolt hole spacing is 6” from center to center of the bolt holes, and 3” when measured from the edge of the bucket cutting edge to the center of the first hole. 279.98

3S3225 RETAINER BAR Caterpillar style retainer bar, takes a 4S7928 cleaner bar 4.32

6W2985 BASE EDGECaterpillar style bolt on base edge with segment holes for a 936E Caterpillar Front End Loader. This is a base edge that is 1" thick, 9.6" wide and 103.92" in length

7I3015 BASE EDGECaterpillar style bolt on base edge with segment holes for a 972 Caterpillar Front End Loader. This is a base edge that is 1.5" thick, 11.81" wide and 125.75" in length.

9V6574 BASE EDGECaterpillar style bolt on base edge with segment holes for a 980F Caterpillar Front End Loader. This is a base edge that is 75" thick, 12" wide and 130.50" in length.

9V6575 BASE EDGECaterpillar style bolt on base edge with segment holes for a 960F Caterpillar Front End Loader. This is a base edge that is 1.5" thick, 12" wide and 119.75" in length.

Caterpillar Style Cleaner Bars3S3228 CLEANER BAR Caterpillar style cleaner bar 16.014S7928 CLEANER BAR Caterpillar style cleaner bar, takes a 3S3225 retainer bar 11.247K8472 CLEANER BAR Caterpillar style cleaner bar 15.609V5074 CLEANER BAR Caterpillar style cleaner bar 21.16Caterpillar Style Corner Protectors8E5300 RH CORNER PROTECTOR Caterpillar style rh corner protector 24.258E5301 LH CORNER PROTECTOR Caterpillar style lh corner protector 24.25Caterpillar Style Cutting Edges

1004047 CENTER EDGECaterpillar style bolt on center cutting edge for a 980 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 16" wide and 55.25" in length. 328.00

1122471 HD END EDGECaterpillar style bolt on extra heavy duty end cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75" thick, 13" wide and 31.5" in length. 190.00

1122472 HD CENTER EDGE

Caterpillar style bolt on extra heavy duty center cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75" thick, 13" wide and 53.25" in length. 322.00

1/2 X 3 X 10 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 10 foot cutting edge that is ½” thick, 3” wide and 10’ in length. 47.00

1/2 X 4 X 8 CUTTING EDGECaterpillar style weld on edge for a Caterpillar Excavator. This is a .5” thick, 4” wide and 8’ long weld on edge. 48.50

1/2 X 6 X 6 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 6 foot cutting edge that is ½” thick, 6” wide and 6’ in length. 54.75

1/2 X 6 X 10 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 10 foot cutting edge that is 1/2" thick, 6" wide and 10" in length. 91.27

1 X 6 X 7 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 7 foot cutting edge that is 1” thick, 6” wide and 7’ in length. 132.69

1 X 8 X 10 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 10 foot cutting edge that is 1” thick, 8” wide and 10’ in length. 246.92

1 X 8 X 12 WELD ON EDGE

Caterpillar style bolt on base edge for a Caterpillar Front End Loader. This is a base edge that is 1” thick, 8” wide and 144” in length. The bolt hole spacing is 6” from center to center of the bolt holes, and 3” when measured from the edge of the bucket cutting edge to the center of the first hole. 319.67

1 X 10 X 8 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 8 foot cutting edge that is 1" thick, 10" wide and 8" in length. 247.00


1 1/2 X 10 X 12 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 12 foot cutting edge that is 1 1/2” thick, 10” wide and 12’ in length. 579.81

1 1/2 X 12 X 5 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 5 foot cutting edge that is 1 1/2” thick, 12” wide and 5’ in length. 289.91

1 1/2 X 12 X 10 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 10 foot cutting edge that is 1.5" thick, 12" wide and 10" in length. 580.00




100-4043 END EDGECaterpillar style bolt on end cutting edge for a 980 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.75” thick, 22” wide and 10.375” in length. 109.00

100-4044 CENTER EDGECaterpillar style bolt on center cutting edge for a 966 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.625" thick, 22" wide and 8" in length. 71.00

100-6668 CENTER EDGE

Caterpillar style bolt on center cutting edge for a 970 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.1875" thick, 14.1719" wide and 55.125" in length. 231.00


104-5841 CENTER EDGECaterpillar style bolt on center cutting edge for a 988 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 16" wide and 62.375" in length. 366.00

104-9634 CENTER EDGECaterpillar style bolt on center cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 6.5" wide and 38.375" in length. 38.60

106-0956 CENTER EDGECaterpillar style bolt on center cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 10" wide and 54.375" in length. 106.92

107-3746 CENTER EDGECaterpillar style bolt on center cutting edge for a 938 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 11" wide and 46.5625" in length. 136.91

109-9212 CENTER EDGECaterpillar style bolt on center cutting edge for a 980G Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 16" wide and 57" in length. 338.00

109-9230 HD CENTER EDGE

Caterpillar style bolt on heavy duty center cutting edge for a 980F Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.625" thick, 16" wide and 57" in length. 369.00

110-4711 CENTER EDGECaterpillar style bolt on center cutting edge for a 938 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 11" wide and 47.25" in length. 135.80

118-7110 CENTER EDGECaterpillar style bolt on center cutting edge for a 426 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 47.1875" in length. 74.52

122-9227 CENTER EDGECaterpillar style bolt on center cutting edge for a 824G Wheel Dozer. This is a double beveled reversible bucket cutting edge that is 1” thick, 10” wide and 35.25” in length. 85.00

135-9395 CENTER EDGECaterpillar style bolt on center cutting edge for a 66" Caterpillar Skid Steer Bucket. This is a double beveled reversible bucket cutting edge that is .625" thick, 6.5" wide and 68.625" in length. 70.55

135-9396 CENTER EDGECaterpillar style bolt on center cutting edge for a 72" Caterpillar Skid Steer Bucket. This is a double beveled reversible bucket cutting edge that is .625" thick, 6.5" wide and 74.625" in length. 77.16

135-9397 CENTER EDGECaterpillar style bolt on a 78” skid steer bucket cutting edge. This is a double beveled reversible bucket cutting edge that is .625” thick, 6.5” wide and 80.579” in length. 83.00



140-0983 CENTER EDGECaterpillar style bolt on center cutting edge for a D5 Caterpillar Bulldozer. This is a double beveled reversible center cutting edge that is .625” thick, 8” wide and 35.875” in length. 45.00

140-2187 CENTER EDGECaterpillar style bolt on center cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is .625” thick, 6.5” wide and 39.8” in length. 40.79

157-7338 CENTER EDGECaterpillar style bolt on center cutting edge for a D3 Caterpillar Bulldozer. This is .625” thick, 6.5” wide and 43.25” in length. 45.00

174-7967 CENTER EDGECaterpillar style bolt on end cutting edge for a 622 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 35.5" in length. 88.00

174-7968 CENTER EDGECaterpillar style bolt on end cutting edge for a 622 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 35.5" in length. 96.00

174-7973 CENTER EDGECaterpillar style bolt on 66" skid steer bucket cutting edge. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 68.625" in length. 106.00


Caterpillar style bolt on for a 78” skid steer bucket cutting edge. This is a double beveled reversible bucket cutting edge that is .75” thick, 8” wide and 80.579” in length. It takes 11 of a 5/8” X 2” (625X200) plow bolt and 11 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 4.67” from center to center of the bolt holes, and 2.96” when measured from the edge of the bucket cutting edge to the center of the first hole. 124.00

1C6031 END EDGECaterpillar style bolt on right or left end cutting edge for an 80 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 29.5" in length. 97.66

1C6157 INTERMEDIATE EDGE

Caterpillar style bolt on end cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is .75” thick, 8” wide and 25.875” in length. It takes 4 of a 3/4” X 2 1/4”(750X225) plow bolt and 4 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.94” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item #4T3010 40.79

1C6568 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D3 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .63” thick, 6.5” wide and 34.25” in length. It takes 6 of a 5/8 X 2 ¼” (625X225) plow bolt and 6 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 2.13” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T6230 35.27

1G1726 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75” thick, 8” wide and 59.875” in length. It takes 10 of a 3/4” X 2 1/4”(750X225) plow bolt and 10 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 2.94” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item #4T3009 94.80

1G2390 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .625” thick, 8” wide and 31.875” in length. It takes 5 of a 5/8” X 2” (625X200) plow bolt and 5 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.938” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T2974 41.89

1H3052 END EDGE

Caterpillar style bolt on right or left end cutting edge for an 80 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 29.5" in length. It takes 5 of a 1" X 3" (100X300) plow bolt and 5 of a 1" (100 HEX NUT) hex nut. The bolt hole spacing is 6" from center to center of the bolt holes, and 2.75" when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T6612 97.66

1H3057 CENTER EDGE

Caterpillar style bolt on center cutting edge for a 90 Caterpillar Scraper. This is a double beveled reversible center cutting edge that is .875” thick, 13” wide and 60.25” in length. It takes 10 of a 1” X 3”(100X300) plow bolt and 10 of a 1”(100 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the first 2 bolt holes, and 3.125” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T6620 176.60

1J9428 END EDGECaterpillar style bolt on end cutting edge for a D8H Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 35.875" in length. 98.10


1J9541 CENTER EDGE


1U0292 CENTER EDGECaterpillar style bolt on center cutting edge for a 936 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 11" wide and 45.75" in length. 124.34

1U0293 CENTER EDGECaterpillar style bolt on center cutting edge for a 953 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 11" wide and 37" in length. 114.99


1U0593 CENTER EDGE

Caterpillar style bolt on center cutting edge for a 966D Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.1875" thick, 14.1719" wide and 51.875" in length. 221.00

1U0600 CENTER EDGE


1U0601 CENTER EDGE




1U0761 END EDGECaterpillar style bolt on end cutting edge for a 980 Caterpillar Front End Loader. This is a double beveled reversible bucket end cutting edge that is 1.625" thick, 10.375" wide and 22" in length. 90.39

1U0762 CENTER EDGECaterpillar style bolt on center cutting edge for a 980 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 16" wide and 55.25" in length. 328.00

1U1192 END EDGECaterpillar style bolt on end cutting edge for a D7 Caterpillar Bulldozer. This is .75” thick, 10” wide and 35.938” in length. 68.30

1U1464 END EDGECaterpillar style bolt on end cutting edge for a 920 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 11" wide and 32.25" in length. 84.00


1U1469 END EDGECaterpillar style bolt on end cutting edge for a 944 Caterpillar Front End Loader. This is a double beveled reversible bucket end cutting edge that is 1.18" thick, 14.17" wide and 33.25" in length. 141.09

1U1470 CENTER EDGE

Caterpillar style bolt on center cutting edge for a 944 Caterpillar Front End Loader. This is a double beveled reversible bucket end cutting edge that is 1.18" thick, 14.17" wide and 39" in length. 167.00

1U1475 END EDGECaterpillar style bolt on end edge for a 966 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.18” thick, 14.17” wide and 29.75” in length. 121.00

1U1476 CENTER EDGECaterpillar style bolt on center edge for a 966 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.18” thick, 14.17” wide and 55.25” in length. 224.00


1U2211 CENTER EDGECaterpillar style bolt on center cutting edge for a D5 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 54.875" in length. 86.99

1U2406 CENTER EDGE



1U4929 HD END EDGECaterpillar style bolt on heavy duty end cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 10" wide and 31.75" in length 113.40

1U4930 HD CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 10" wide and 33.75" in length. 108.00

1U4931 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1.375” thick, 10” wide and 43” in length. 144.40

1U4943 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.125" thick, 13" wide and 53.25" in length. 216.00


2Y2329 END EDGECaterpillar style bolt on end cutting edge for a D8H Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 35.875" in length. 98.10

3/4 X 6 X 7 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 7 foot cutting edge that is 3/4” thick, 6” wide and 7’ in length. 115.50

3/4 x 6 x 10 WELD ON EDGECaterpillar style weld on flat single bevel excavator cutting edge. This is a FSB, flat single bevel 10 foot cutting edge that is 3/4" thick, 6" wide and 10" in length. 177.00




3F2819 GRADER OVERLAY

Caterpillar style bolt on right hand or left hand grader overlay for a 112 Caterpillar Grader. This is a double beveled reversible bucket overlay blade that is .625" thick, 9.25" wide and 18.25" in length. It takes 8 of a 5/8" X 3"(625X300) plow bolt and 8 of a 5/8"(625 HEX NUT) hex nut. Use Item # 6D1904 28.00

3F2820 GRADER OVERLAY

Caterpillar style bolt on right hand or left hand grader overlay for a 112 Caterpillar Grader. This is a double beveled reversible bucket overlay blade that is .625" thick, 9.25" wide and 18.25" in length. 28.00


3G3354 CENTER EDGECaterpillar style bolt on center cutting edge for a D3 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 6.5" wide and 47.75" in length. 55.12

3G4282 CENTER EDGECaterpillar style bolt on center cutting edge for a D5 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 45.375" in length. 70.99

3G6062 CENTER EDGECaterpillar style bolt on center cutting edge for a D5 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 75” thick, 8” wide and 41.125” in length. 63.00

3G8264 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.125" thick, 13" wide and 53.25" in length. 216.00

3G9306 CENTER EDGECaterpillar style bolt on center cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 8" wide and 34.8125" in length. 48.05

4J3632 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D6A Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75” thick, 10” wide and 31.5” in length. It takes 5 of a 3/4” X 2 1/2”(750X250) plow bolt and 5 of a 1”(750 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.75” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T2952 62.17

4J3634 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1” thick, 10” wide and 31.5” in length. It takes 5 of a 3/4” X 2 1/2”(750X250) plow bolt and 5 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.75” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item #4T2985 85.98

4J8232 CENTER EDGECaterpillar style bolt on center cutting edge for a D8N Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 35.5" in length. 169.00

4T2306 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.125" thick, 13" wide and 53.25" in length. 216.00

4T2315 CENTER EDGECaterpillar style bolt on center cutting edge for a D5 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 61.25" in length. 95.90

4T2863 CENTER EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1” thick, 10” wide and 59.875” in length 154.00

4T2887 CENTER EDGECaterpillar style bolt on end cutting edge for a 623 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 16" wide and 60.25" in length. 214.00

4T2888 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 63.875" in length. 164.00

4T2895 CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a 621 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is 1.125” thick, 16” wide and 60.25” in length. 282.00

4T2896 CENTER EDGECaterpillar style bolt on end cutting edge for a 621 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is 1.125" thick, 16" wide and 56.25" in length. 262.00

4T2914 END EDGECaterpillar style bolt on end edge for a 933 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is .75” thick, 10” wide and 17” in length. 34.00

4T2915 CENTER EDGE

Caterpillar style bolt on center edge for a 933 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is .75” thick, 10” wide and 58.5” in length. It takes 3 of a 3/4” X 2 1/4”(750X225) plow bolt and 3 of a 3/4”(750 HEX NUT). 113.00

4T2916 END EDGECaterpillar style bolt on end cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is .75” thick, 10” wide and 32.25” in length. 62.00

4T2917 CENTER EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible center cutting edge that is .75” thick, 10” wide and 53.375” in length. 95.00


4T2922 END EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 10" wide and 29.875" in length. 58.16

4T2945 END EDGECaterpillar style bolt on end cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is .75” thick, 10” wide and 27.875” in length. 55.00

4T2946 CENTER EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible center cutting edge that is .75” thick, 10” wide and 43.875” in length. 84.00

4T2948 CENTER EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is .75” thick, 10” wide and 41.875” in length. 80.00

4T2949 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is .75” thick, 10” wide and 59.875” in length. It takes 15 of a 3/4” X 2 3/4” (750X275) plow bolt and 15 of a 3/4” (750 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 1.938” when measured from the edge of the bucket cutting edge to the center of the first hole. 110.00

4T2952 CENTER EDGECaterpillar style bolt on center cutting edge for a D6A Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 10" wide and 31.5" in length. 62.17

4T2972 END EDGECaterpillar style bolt on end cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 8" wide and 26.5" in length. 33.99

4T2973 END EDGECaterpillar style bolt on end cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is .625" thick, 8" wide and 33.75" in length. 44.09



4T2983 CENTER EDGECaterpillar style bolt on center cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 8" wide and 15" in length. 19.20



4T2987 END EDGECaterpillar style bolt on end cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 36.375" in length. 93.10




4T2990 CENTER EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1” thick, 10” wide and 43.875” in length. 113.60

4T2991 END EDGECaterpillar style bolt on end cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1” thick, 10” wide and 27.875” in length. 72.00

4T2992 END EDGECaterpillar style bolt on end cutting edge for an 814 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible end edge that is 1" thick, 10" wide and 29.875" in length. 78.48

4T2993 CENTER EDGE

Caterpillar style bolt on center cutting edge for an 814 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible end edge that is 1" thick, 10" wide and 41.875" in length. It takes 7 of a 7/8" X 2 3/4"(875X275) plow bolt and 7 of a 7/8"(875 HEX NUT) hex nut. 108.03

4T2994 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is 1” thick, 10” wide and 47.75” in length. It takes 8 of a 1” X 3 1/4” (100X325) plow bolt and 8 of a 1” (100 HEX NUT) hex nut. 122.20

4T3004 CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a D5 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 56.75" in length. 88.10

4T3008 CENTER EDGECaterpillar style bolt on center cutting edge for an 815 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible end edge that is .75" thick, 8" wide and 45.875" in length. 70.55


4T3010 END EDGECaterpillar style bolt on end cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is .75" thick, 8" wide and 25.875" in length. 40.79


4T3012 CENTER EDGECaterpillar style bolt on center cutting edge for an 815 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible center edge that is .75” thick, 8” wide and 58.875” in length. 91.30


4T3020 END EDGECaterpillar style bolt on end cutting edge for an 815 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible end edge that is .75" thick, 8" wide and 33.813" in length. 52.91

4T3021 HD CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 71.875" in length. 111.09



4T3026 END EDGECaterpillar style bolt on end cutting edge for a D5 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 21.875" in length. 34.00

4T3027 HD CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 15" in length. 23.30

4T3028 HD END EDGECaterpillar style bolt on heavy duty end cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 26.5" in length. 41.40


4T3417 END EDGECaterpillar style bolt on end cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 31.875" in length. 80.00


4T3420 END EDGECaterpillar style bolt on end cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1” thick, 10” wide and 32.125” in length. 82.01

4T3421 CENTER EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible center cutting edge that is 1” thick, 10” wide and 53.375” in length. 133.60



4T3444 CENTER EDGECaterpillar style bolt on center cutting edge for a 611 Caterpillar Scraper. This is a double beveled reversible end cutting edge that is 1.125” thick, 16” wide and 62.125” in length. 298.72

4T5318 CENTER EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is .75” thick, 10” wide and 35.25” in length. 69.00

4T6230 END EDGECaterpillar style bolt on center cutting edge for a D3 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .63" thick, 6.5" wide and 34.25" in length. 35.27

4T6231 CENTER EDGECaterpillar style bolt on center cutting edge for a D3 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .63" thick, 6.5" wide and 41.88" in length. 48.50

4T6232 CENTER EDGECaterpillar style bolt on center cutting edge for a D3 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 6.5" wide and 47.75" in length. 55.12

4T6238 CENTER EDGE

Caterpillar style bolt on center cutting edge for an 825 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible center edge that is 1” thick, 10” wide and 47.25” in length. It takes 8 of a 1” X 3” (100X300) plow bolt and 8 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 2.63” when measured from the edge of the bucket cutting edge to the center of the first hole. 123.00



4T6380 CENTER EDGECaterpillar style bolt on end cutting edge for a 621 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is 1.125" thick, 13" wide and 29.5" in length. 113.01


4T6386 CENTER EDGECaterpillar style bolt on center cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.125" thick, 13" wide and 41" in length. 158.00


4T6515 CENTER EDGE

Caterpillar style bolt on center cutting edge for an 826 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible center edge that is 1” thick, 10” wide and 69.875” in length. It takes 12 of a 7/8” X 3”(875X300) plow bolt and 12 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 1.94” when measured from the edge of the bucket cutting edge to the center of the first hole. 176.00

4T6531 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is 1” thick, 10” wide and 59.875” in length. It takes 10 of a 7/8” X 3” (875X300) plow bolt and 10 of a 7/8” (875 HEX NUT) hex nut. 154.00

4T6532 END EDGECaterpillar style bolt on end cutting edge for a D8H Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 35.875" in length. 98.10

4T6565 CENTER EDGECaterpillar style bolt on center cutting edge for a 80 Caterpillar Scraper. This is a double beveled reversible end cutting edge that is .875” thick, 16” wide and 54.25” in length. 231.48

4T6568 CENTER EDGECaterpillar style bolt on center cutting edge for a 621 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 16" wide and 56.25" in length. 198.00

4T6588 CENTER EDGECaterpillar style bolt on center edge for a 988 Loader. This is a double beveled reversible cutting edge that is 1.375" thick, 16" wide and 47.625" in length. 279.00

4T6589 CENTER EDGECaterpillar style bolt on center edge for a 980 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.38” thick, 16” wide and 65.63” in length. 384.70

4T6590 END EDGECaterpillar style bolt on end edge for a 980 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.38” thick, 16” wide and 33.75” in length. 197.90

4T6611 CENTER EDGECaterpillar style bolt on center cutting edge for a 613 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 43.375" in length. 115.52

4T6612 END EDGECaterpillar style bolt on right or left end cutting edge for an 80 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 29.5" in length. 97.66

4T6613 END EDGECaterpillar style bolt on right or left end cutting edge for a 613 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 22.125" in length. 72.75

4T6614 END EDGECaterpillar style bolt on end cutting edge for a 631 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 35.5" in length. 102.00

4T6620 CENTER EDGECaterpillar style bolt on center cutting edge for a 90 Caterpillar Scraper. This is a double beveled reversible end cutting edge that is .875” thick, 13” wide and 60.25” in length. 207.23


4T8940 CENTER EDGECaterpillar style bolt on center cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .63" thick, 8" wide and 47" in length. 60.25

4T9558 CENTER EDGECaterpillar style bolt on center cutting edge for a D8N Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 35.5" in length. 169.00

4T9587 END EDGECaterpillar style bolt on end cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket end cutting edge that is 1.125" thick, 13" wide and 31.50" in length. 120.81


5/8 X 8 X 14 CENTER EDGECaterpillar style bolt on double bevel cutting edge. This is a DB double bevel 14 foot cutting edge that is 5/8” thick, 8” wide and 14’ in length. 238.09

5/8 X 10 X 14 CENTER EDGECaterpillar style bolt on double bevel cutting edge. This is a DB double bevel 14 foot cutting edge that is 5/8” thick, 10” wide and 14’ in length. 297.62

5F9497 CENTER EDGE


5J6812 CENTER EDGE

Caterpillar style bolt on heavy duty center cutting edge for a 621 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is 1.125” thick, 16” wide and 60.25” in length. It takes 10 of a 1” X 3” (100X300) plow bolt and 10 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.125” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T2985 85.98

5J6832 END EDGECaterpillar style bolt on end cutting edge for a D8H Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 35.875" in length. 98.10

5J6839 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D6A Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75” thick, 10” wide and 31.5” in length. It takes 5 of a 3/4” X 2 1/2”(750X250) plow bolt and 5 of a 1”(750 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.75” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T2952 62.17

5J6846 END EDGECaterpillar style bolt on right or left end cutting edge for an 80 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 29.5" in length. 97.66

5J6849 CENTER EDGECaterpillar style bolt on end cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is .75” thick, 8” wide and 25.875” in length. 123.00

5J6851 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 63.875" in length. 164.00

5J6861 CENTER EDGECaterpillar style bolt on center cutting edge for a D5 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 8" wide and 95.875" in length. 130.07

5J6870 CENTER EDGE


5J6871 CENTER EDGE



5J6878 CENTER EDGE


6D1904 GRADER OVERLAY




6J1406 CENTER EDGE



6J5430 END EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 10" wide and 29.875" in length. 58.16

6J5945 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.125" thick, 13" wide and 35.5" in length. 143.30

6Y3840 CENTER EDGECaterpillar style bolt on center cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 48.25" in length. 127.87

6Y5538 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket center cutting edge that is 1.125" thick, 13" wide and 89" in length. 351.00

6Y5539 CENTER EDGECaterpillar style bolt on end cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.125" thick, 13" wide and 70.375" in length. 270.00

6Y5540 END EDGECaterpillar style bolt on end cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket end cutting edge that is 1.125" thick, 13" wide and 31.50" in length. 120.81

6Y5841 CENTER EDGECaterpillar style bolt on center cutting edge for a D3 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .63" thick, 6.5" wide and 35.88" in length. 36.82

6Y5842 CENTER EDGECaterpillar style bolt on center cutting edge for a D4 and D5 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .63" thick, 6.5" wide and 49.88" in length. 51.59


7J2847 END EDGECaterpillar style bolt on end cutting edge for an 814 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible end edge that is 1" thick, 10" wide and 29.875" in length. 78.48

7J2957 CENTER EDGE

Caterpillar style bolt on center cutting edge for a 637 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is 1.625” thick, 16” wide and 54.25” in length. It takes 9 of a 1” X 3 1/4” (100X325) plow bolt and 9 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.125” when measured from the edge of the bucket cutting edge to the center of the first hole. 369.80

7J2959 HD CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.625" thick, 13" wide and 35.5" in length. 199.00

7J2980 HD CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.625" thick, 13" wide and 41" in length. 222.00

7J3026 CENTER EDGE

Caterpillar style bolt on center cutting edge for a 637 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is 1.375” thick, 16” wide and 54.25” in length. It takes 9 of a 1” X 3 1/4” (100X325) plow bolt and 9 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.125” when measured from the edge of the bucket cutting edge to the center of the first hole. 311.00

7J3193 END EDGECaterpillar style bolt on right or left end cutting edge for an 80 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 29.5" in length. 97.66

7J3558 CENTER EDGE


7J4022 CENTER EDGECaterpillar style bolt on center cutting edge for a 613 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 43.375" in length. 115.52

7J4023 END EDGE

Caterpillar style bolt on right or left end cutting edge for a 613 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875” thick, 13” wide and 22.125” in length. It takes 8 of a 3/4” X 2 1/4”(750X225) plow bolt and 8 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 2.06” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T6613 72.75

7J4689 END EDGE

Caterpillar style bolt on right or left end cutting edge for a 613 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875” thick, 13” wide and 22.125” in length. It takes 8 of a 3/4” X 2 1/4”(750X225) plow bolt and 8 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 2.06” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T6613 72.75

7J4690 CENTER EDGECaterpillar style bolt on center cutting edge for a 613 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 43.375" in length. 115.52

7J9475 CENTER EDGECaterpillar style bolt on center cutting edge for an 815 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible end edge that is .75" thick, 8" wide and 45.875" in length. 70.55

7J9476 END EDGECaterpillar style bolt on end cutting edge for an 815 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible end edge that is .75" thick, 8" wide and 33.813" in length. 52.91

7J9477 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75” thick, 8” wide and 39.875” in length. It takes 7 of a 3/4” X 2 1/4”(750X225) plow bolt and 7 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 1.94” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T3013 62.17


7J9478 INTERMEDIATE EDGE

Caterpillar style bolt on end cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is .75” thick, 8” wide and 25.875” in length. It takes 4 of a 3/4” X 2 1/4”(750X225) plow bolt and 4 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.94” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T3010 40.79

7J9481 CENTER EDGECaterpillar style bolt on center cutting edge for an 814 Caterpillar Wheel Dozer/Compactor. This is a double beveled reversible end edge that is 1" thick, 10" wide and 41.875" in length. 108.03

7T5701 HD CENTER EDGECaterpillar style bolt on extra heavy duty center cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 89" in length. 421.00


7T6589 CENTER EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 11" wide and 43" in length. 124.01

7T6678 CENTER EDGECaterpillar style bolt on center cutting edge for a D7N Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 11" wide and 35.25" in length. 93.48

7T6936 END EDGECaterpillar style bolt on end cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1" thick, 11" wide and 35.9375" in length. 95.06

7T9125 CENTER EDGE Caterpillar style D8N center edge 151.00


7T9127 END EDGECaterpillar style bolt on end cutting edge for a D8N Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 32.4375" in length. 149.91

7T9779 END EDGECaterpillar style bolt on end cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1.375” thick, 16” wide and 32.75” in length. 178.00

7T9782 CENTER EDGECaterpillar style bolt on center cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1.375” thick, 16” wide and 35.75” in length. 207.00



7T9978 CENTER EDGECaterpillar style bolt on end cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1” thick, 8” wide and 25.875” in length. 55.00

8A7914 END EDGE

Caterpillar style bolt on end cutting edge for a D4 Caterpillar Bulldozer. This is .625” thick, 8” wide and 23” in length. It takes 4 of a 5/8” X 2” (625X200) plow bolt and 4 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 2.5” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #8A8581 30.00

8A8580 CENTER EDGECaterpillar style bolt on center cutting edge for a D4 Caterpillar Bulldozer. This is .625” thick, 8” wide and 24.625” in length. 31.60

8A8581 END EDGECaterpillar style bolt on end cutting edge for a D4 Caterpillar Bulldozer. This is .625” thick, 8” wide and 23” in length. 30.00

8E4567 CENTER EDGECaterpillar style bolt on center cutting edge for a 928 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 11" wide and 43.5" in length. 127.43

8E9377 CENTER EDGECaterpillar style bolt on center cutting edge for a D5 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .63" thick, 8" wide and 41.50" in length. 53.20

8J1489 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .625” thick, 8” wide and 31.875” in length. It takes 5 of a 5/8” X 2” (625X200) plow bolt and 5 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 3.938” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T2974 41.89

8J1490 END EDGECaterpillar style bolt on end cutting edge for a D4 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is .625" thick, 8" wide and 33.75" in length. 44.09

8J7144 CENTER EDGE

Caterpillar style bolt on center cutting edge for a D3 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .63” thick, 6.5” wide and 34.25” in length. It takes 6 of a 5/8 X 2 ¼” (625X225) plow bolt and 6 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 2.13” when measured from the edge of the bucket cutting edge to the center of the first hole, Use Item #4T6230 35.27

8J7145 CENTER EDGECaterpillar style bolt on center cutting edge for a D3 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .63" thick, 6.5" wide and 41.88" in length. 48.50


8J7749 CENTER EDGE

Caterpillar style bolt on center cutting edge for a 944 Caterpillar Front End Loader. This is a double beveled reversible bucket end cutting edge that is 1.18" thick, 14.17" wide and 39" in length. 167.00

8J7750 END EDGECaterpillar style bolt on end cutting edge for a 944 Caterpillar Front End Loader. This is a double beveled reversible bucket end cutting edge that is 1.18" thick, 14.17" wide and 33.25" in length. 141.09

8J8118 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 40.75" in length. 105.82

9J4369 HD CENTER EDGE

Caterpillar style bolt on extra heavy duty center cutting edge for a 631 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 16" wide and 62.125" in length. 359.00

9J5899 CENTER EDGECaterpillar style bolt on HD center cutting edge for a 631 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is 1.625” thick, 16” wide and 62.125” in length. 423.00

9U8057 END EDGECaterpillar style bolt on end cutting edge for a D6 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 3/4" thick, 8" wide and 24.688" in length. 39.99

9U9665 CENTER EDGECaterpillar style bolt on center cutting edge for a 446 Caterpillar Backhoe. This is a double beveled reversible end cutting edge that is .75” thick, 10” wide and 48.125” in length. 95.24

9W1375 CENTER EDGECaterpillar style bolt on end edge for a 988 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.63” thick, 16” wide and 60” in length. 402.00

9W4508 END EDGECaterpillar style bolt on heavy duty end cutting edge for a D9 Caterpillar Bulldozer. This is 1.625” thick, 13” wide and 48.125” in length. 253.00


9W1768 GRADER OVERLAY


9W1878 CENTER EDGECaterpillar style bolt on center cutting edge for a D6N Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 10" wide and 48.25" in length. 95.20

9W3927 END EDGECaterpillar style bolt on end cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1.75” thick, 13” wide and 31.5” in length. 191.00

9W4396 HD CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 66.625" in length. 317.00

9W4398 HD END EDGECaterpillar style bolt on heavy duty end cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 31.5" in length. 147.00

9W4493 HD INTERMEDIATE EDGE

Caterpillar style bolt on extra heavy duty intermediate cutting edge for a D11 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 2.375" thick, 16" wide and 40.25" in length. 406.00

9W4494 HD END EDGE

Caterpillar style bolt on extra heavy duty end cutting edge for a D11 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 2.375" thick, 16" wide and 40.125" in length. 395.00

9W4495 HD CENTER EDGE

Caterpillar style bolt on extra heavy duty center cutting edge for a D11 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 2.375" thick, 16" wide and 43.25" in length. 437.00

9W4500 HD CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 41" in length. 192.00

9W4501 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 53.25" in length. 254.00

9W4508 END EDGECaterpillar style bolt on heavy duty end cutting edge for a D9 Caterpillar Bulldozer. This is 1.625” thick, 13” wide and 48.125” in length. 253.00

9W5232 END EDGECaterpillar style bolt on end cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket end cutting edge that is 1.13" thick, 13" wide and 32.50" in length.. 132.28

9W5432 CENTER EDGECaterpillar style bolt on end cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.125" thick, 13" wide and 48.75" in length. 186.00

9W5806 END EDGECaterpillar style bolt on end bit for a 615 Caterpillar Scraper. This is a level cut right hand or left hand end bit that is .875" thick, 16" wide and 21.125" in length. 84.88

9W5807 CENTER EDGECaterpillar style bolt on center cutting edge for a 615 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 16" wide and 59.5" in length. 242.00

9W5810 END EDGECaterpillar style bolt on end cutting edge for a 615 Caterpillar Scraper. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 21.125" in length. 63.01

9W6092 CENTER EDGECaterpillar style bolt on center cutting edge for a D8N Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 35.5" in length. 169.00

9W6608 END EDGECaterpillar style bolt on end cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 16" wide and 33.812" in length. 189.00

9W6609 CENTER EDGECaterpillar style bolt on center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 16" wide and 39.125" in length. 226.00

9W6615 CENTER EDGECaterpillar style bolt on end cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 16" wide and 33.375" in length. 192.00

9W6656 HD CENTER EDGECaterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75" thick, 16" wide and 39.125" in length. 294.00

9W6657 END EDGECaterpillar style bolt on end cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket end cutting edge that is 1.75" thick, 16" wide and 33.8125" in length. 256.00

9W6658 CENTER EDGECaterpillar style bolt on center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket center cutting edge that is 1.75" thick, 16" wide and 33.375" in length. 256.00

9W7043 HD CENTER EDGECaterpillar style bolt on heavy duty center cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75" thick, 13" wide and 70.375" in length. 431.00

9W7044 CENTER EDGECaterpillar style bolt on center cutting edge for a D8 Caterpillar Bulldozer. This is a double beveled reversible bucket center cutting edge that is 1.125" thick, 13" wide and 89" in length. 351.00

9W8215 CENTER EDGECaterpillar style bolt on center cutting edge for a 418 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 44.5" in length. 70.11

9W9098 CENTER EDGECaterpillar style bolt on center cutting edge for a D9 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1.375” thick, 13” wide and 48.75” in length 229.00

9W9701 CENTER EDGECaterpillar style bolt on center cutting edge for a 651 Caterpillar Scraper. This is a double beveled reversible bucket center cutting edge that is 1.75” thick, 19” wide and 71.75” in length. 629.00

9W9702 END EDGECaterpillar style bolt on end cutting edge for a 651 Caterpillar Scraper. This is a double beveled reversible bucket end cutting edge that is 1.75” thick, 16” wide and 36.75” in length. 264.00

9W9796 CENTER EDGECaterpillar style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible end cutting edge that is 1” thick, 11” wide and 41.75” in length. 125.00

B/O 60 BOLT ON EDGECaterpillar Bolt on Cutting Edge for Front End Loaders. This is a double beveled reversible cutting edge that is .75" thick, 8" wide and 60" in length. 99.21



Caterpillar Style End Bits

109-3118 LH/RH GRADER END BITCaterpillar style bolt on RH/LH grader end bit for a 24H Caterpillar Grader. This is a grader end bit that is 1” thick, 8” wide and 28” in length. 52.00

1G1911 RH END BIT Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843RH 74.961G1912 LH END BIT Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844LH 74.96

1U1545 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.625" thick, 14.5" wide and 27" in length. 139.99

1U1546 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.625" thick, 14.5" wide and 27" in length. 139.99


2C1847 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left hand end bit that is 1" thick, 10.3" wide and 15.44" in length. 36.00

2C2301 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2" thick, 16" wide and 24" in length. 155.00

2C2302 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2" thick, 16" wide and 24" in length. 155.00

2C2328 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. 36.00

2C2384 LH END BIT Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844LH 74.962C2385 RH END BIT Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843RH 74.962J2571 RH END BIT Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843 74.962J2572 LH END BIT Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844 74.96

3B4757 GRADER END BITCaterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is a grader end bit that is .625" thick, 6" wide and 18.375" in length. 16.75

3G4285 LEVEL CUT END BIT RH OR LHCaterpillar style bolt on end bit for a D4 or a D5 Caterpillar Bulldozer. This is a level cut right hand or left hand end bit that is .75" thick, 8" wide and 16.75" in length. 26.46

3G6395 END BIT RH OR LHCaterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375" thick, 8" wide and 20.25" in length. 56.44

3G6993 END BIT RH OR LHCaterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1" thick, 6.25" wide and 13.5625" in length. 22.05

3G8277 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.625" thick, 13" wide and 22" in length. 97.99

3G8278 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.625" thick, 13" wide and 22" in length. 97.99

3G8281 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.625" thick, 16" wide and 27.5" in length. 153.00

3G8282 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.625" thick, 16" wide and 27.5" in length. 153.00

3G8283 RH END BITCaterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 plow bolts and 9 - 100 hex nuts; Use Item # 8E4197 155.00

3G8284 LH END BITCaterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 plow bolts and 9 - 100 hex nuts; Use Item # 8E4196 155.00



3G8287 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.625" thick, 13" wide and 22" in length. 105.01

3G8288 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.625" thick, 13" wide and 22" in length. 105.01



3G8291 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.375" thick, 15.5" wide and 24" in length. 103.99

3G8292 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.375" thick, 15.5" wide and 24" in length. 103.99

3G8293 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is .875" thick, 13.125" wide and 21.625" in length. 66.14

3G8294 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is .875" thick, 13.125" wide and 21.625" in length. 66.14

3G8295 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. 36.00

3G8296 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left hand end bit that is 1" thick, 10.3" wide and 15.44" in length. 36.00

3G8297 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1" thick, 10.375" wide and 15.75" in length. 38.58

3G8298 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1" thick, 10.375" wide and 15.75" in length. 38.58



3G8301 RH END BITCaterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 plow bolts and 9 - 100 hex nuts 57.54

3G8302 LH END BITCaterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 plow bolts and 9 - 100 hex nuts 57.54

3G8315 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1.25" thick, 13.125" wide and 21.625" in length. 64.15

3G8316 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1.25" thick, 13.125" wide and 21.625" in length. 64.15



3G8319 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1" thick, 10.25" wide and 17.625" in length. 39.68

3G8320 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1" thick, 10.25" wide and 17.625" in length. 39.68

3G8321 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1" thick, 10" wide and 17.5" in length. 38.58


3G8322 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1" thick, 10" wide and 17.5" in length. 38.58

3G9512 END BIT RH OR LHCaterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375" thick, 6.6875" wide and 19.625" in length. 48.94

4J8261 RH END BITCaterpillar style right hand end bit that is 15" long, 8" wide and 3/4" thick; takes 8 - 750x300 plow bolts and 8 - 750 hex nuts 23.36

4J8262 LH END BITCaterpillar style left hand end bit that is 15" long, 8" wide and 3/4" thick; takes 8 - 750x300 plow bolts and 8 - 750 hex nuts 23.36

4J8843 RH END BIT Caterpillar style right hand end bit, 7/8" bolt holes 74.964J8844 LH END BIT Caterpillar style left hand end bit, 7/8" bolt holes 74.96

4T2436 END BIT RH OR LHCaterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1" thick, 6.25" wide and 13.5625" in length. 22.05


4T3041 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D5A Caterpillar Bulldozer. This is a level cut right hand end bit that is 1" thick, 8" wide and 14.9375" in length. 38.36

4T3042 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D5A Caterpillar Bulldozer. This is a level cut left hand end bit that is 1" thick, 8" wide and 14.9375" in length. 38.36

4T3043 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D4 Caterpillar Bulldozer. This is a level cut right hand end bit that is .75" thick, 8" wide and 12" in length. 17.20

4T3044 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D4 Caterpillar Bulldozer. This is a level cut left hand end bit that is .75" thick, 8" wide and 12" in length. 17.20

4T3045 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1" thick, 8" wide and 14 3/4" in length. 28.59

4T3046 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1" thick, 8" wide and 14 3/4" in length. 28.59

4T3049 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit that is 3/4" thick, 8" wide and 14" in length. 19.91

4T3050 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit that is 3/4" thick, 8" wide and 14" in length. 19.91

4T3051 RH END BITCaterpillar style right hand end bit that is 13 1/2" long, 8" wide and 3/4" thick; takes 6 - 625x300 plow bolts and 6 - 625 hex nuts 20.28

4T3052 LH END BITCaterpillar style left hand end bit that is 13 1/2" long, 8" wide and 3/4" thick; takes 6 - 625x300 plow bolts and 6 - 625 hex nuts 20.28

4T4435 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1" thick, 8" wide and 16" in length. 31.31

4T4436 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1" thick, 8" wide and 16" in length. 31.31

4T4454 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1 1/4" thick, 10 3/4" wide and 17 1/2" in length. 53.99

4T4455 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1 1/4" thick, 10 3/4" wide and 17 1/2" in length. 53.99

4T5407 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D4 and D5 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1" thick, 10" wide and 21" in length. 54.01

4T5408 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D4 and D5 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1" thick, 10" wide and 21" in length. 54.01

4T6229 LEVEL CUT END BIT RH OR LHCaterpillar style bolt on end bit for a D3 Caterpillar Bulldozer. This is a level cut right hand or left hand end bit that is .75" thick, 6.5" wide and 13" in length. 15.87

4T6391 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1.125" thick, 13" wide and 19.95" in length. 71.01

4T6392 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1.125" thick, 13" wide and 19.95" in length. 71.01

4T6505 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1" thick, 10" wide and 18" in length. 44.00

4T6506 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1" thick, 10" wide and 18" in length. 44.00


4T8101 END BIT RH OR LHCaterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375" thick, 6.6875" wide and 19.625" in length. 48.94

5A4101 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left hand end bit that is 1" thick, 10.3" wide and 15.44" in length. 36.00

5A7881 RH END BITCaterpillar style right hand end bit that is 17" long, 8" wide and 3/4" thick; takes 8 - 750x300 plow bolts and 8 - 750 hex nuts; Use Item # 3G8319 39.68

5A7882 LH END BITCaterpillar style left hand end bit that is 17" long, 8" wide and 3/4" thick; takes 8 - 750x300 plow bolts and 8 - 750 hex nuts; Use Item # 3G8320 39.68

5J6923 RH END BITCaterpillar style right hand end bit that is 13 1/2" long, 8" wide and 3/4" thick; takes 6 - 625x300 plow bolts and 6 - 625 hex nuts, Use Item #4T3051 20.28

5J6924 LH END BITCaterpillar style left hand end bit that is 13 1/2" long, 8" wide and 3/4" thick; takes 6 - 625x300 plow bolts and 6 - 625 hex nuts, Use Item #4T3052 20.28

5J6939 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D5A Caterpillar Bulldozer. This is a level cut right hand end bit that is 1" thick, 8" wide and 14.9375" in length. 38.36

5J6940 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D5A Caterpillar Bulldozer. This is a level cut left hand end bit that is 1" thick, 8" wide and 14.9375" in length. 38.36

5J6941 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D4 Caterpillar Bulldozer. This is a level cut right hand end bit that is .75" thick, 8" wide and 12" in length. 17.20

5J6942 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D4 Caterpillar Bulldozer. This is a level cut left hand end bit that is .75" thick, 8" wide and 12" in length. 17.20

5J8767 RH END BIT Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843 74.965J8768 LH END BIT Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844 74.96

5J9627 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is .875" thick, 13.125" wide and 21.625" in length. 66.14


5J9628 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is .875" thick, 13.125" wide and 21.625" in length. 66.14

6J0275 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1" thick, 10.25" wide and 17.625" in length. 39.68

6J0276 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1" thick, 10.25" wide and 17.625" in length. 39.68

6J0277 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1" thick, 10" wide and 17.5" in length. 38.58

6J0278 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1" thick, 10" wide and 17.5" in length. 38.58

6J0893 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped right hand end bit that is 1" thick, 10.3" wide and 15.44" in length. 36.00

6J0894 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left hand end bit that is 1" thick, 10.3" wide and 15.44" in length. 36.00

6J0895 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1" thick, 10.375" wide and 15.75" in length. 38.58

6J0896 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1" thick, 10.375" wide and 15.75" in length. 38.58

6Y4277 RH END BITCaterpillar style bolt on right hand level cut end bit for a D8 Bulldozer. This is a level cut end bit that is 1.5" thick, 13" wide and 23.3" in length. 107.70

6Y4278 LH END BITCaterpillar style bolt on left hand level cut end bit for a D8 Bulldozer. This is a level cut end bit that is 1.5" thick, 13" wide and 23.3" in length. 107.70

6Y4410 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1.25" thick, 12" wide and 19.5" in length. 59.52

6Y4411 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1.25" thick, 12" wide and 19.5" in length. 59.52

6Y5839 ANGLED END BIT RHCaterpillar style bolt on end bit for a D3, D4 and D5 Caterpillar Bulldozers. This is an angled right hand end bit that is .63" thick, 6.5" wide and 13.88" in length. 13.45

6Y5840 ANGLED END BIT LHCaterpillar style bolt on end bit for a D3, D4 and D5 Caterpillar Bulldozers. This is an angled left hand end bit that is .63" thick, 6.5" wide and 13.88" in length. 13.45

7D2052 GRADER END BITCaterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is a grader end bit that is .625" thick, 6" wide and 18.375" in length. 16.75

7J3463 RH END BITCaterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 plow bolts and 9 - 100 hex nuts; Use Item # 8E4197 155.00

7J3464 LH END BITCaterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9 - 100x400 plow bolts and 9 - 100 hex nuts; Use Item # 8E4196 155.00

7T4096 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2 1/4" thick, 19" wide and 29" in length. 280.00

7T4097 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2 1/4" thick, 19" wide and 29" in length. 280.00

7T4687 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2" thick, 19" wide and 29" in length. 255.00

7T4688 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2" thick, 19" wide and 29" in length. 255.00

7T6587 RH END BIT Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843 74.967T6588 LH END BIT Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844 74.96

7T9089 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1.625" thick, 15.875" wide and 23.5" in length. 127.87

7T9090 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1.625" thick, 15.875" wide and 23.5" in length. 127.87

7T9092 LH END BITCaterpillar style left hand end bit that takes 7 - 100x325 plow bolts and 7 - 100 hex nuts; Use Item # 8E4538 164.00

7T9093 RH END BITCaterpillar style right hand end bit that takes 7 - 100x325 plow bolts and 7 - 100 hex nuts; Use Item # 8E4537 164.00

8E4193 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1.625" thick, 15.875" wide and 23.5" in length. 127.87

8E4194 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1.625" thick, 15.875" wide and 23.5" in length. 127.87

8E4196 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2" thick, 16" wide and 24" in length. 155.00

8E4197 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2" thick, 16" wide and 24" in length. 155.00

8E4198 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2" thick, 19" wide and 29" in length. 255.00

8E4199 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2" thick, 19" wide and 29" in length. 255.00

8E4537 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 2" thick, 15.875" wide and 23.5" in length. 169.00

8E4538 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 2" thick, 15.875" wide and 23.5" in length. 169.00

8E4539 RH END BIT Caterpillar style right hand end bit for D8-9 doziers 158.008E4540 LH END BIT Caterpillar style left hand end bit for D8-9 doziers 158.00

8E4541 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2 1/4" thick, 19" wide and 29" in length. 280.00

8E4541HDR RH END BIT Caterpillar style right hand ribbed end bit, takes 7 - 125 X 400 plow bolts and 7 - 125 hex nuts 285.00

8E4542 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2 1/4" thick, 19" wide and 29" in length. 280.00

8E4542HDL LH END BIT Caterpillar style left hand ribbed end bit, takes 7 - 125 X 400 plow bolts and 7 - 125 hex nuts 285.00

8E4545 RH END BITCaterpillar style right hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts 259.00

8E4546 LH END BITCaterpillar style left hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts 259.00


8E5529 END BITCaterpillar style bolt on right hand or left hand grader end bits for a 14G Caterpillar Grader. This is a grader end bit that is .625" thick, 6" wide and 18.25" in length. 18.00

8E5530 END BITCaterpillar style bolt on right hand or left hand grader end bits for a 16G Caterpillar Grader. This is a grader end bit that is .75” thick, 6” wide and 17.5” in length. 18.00

8E5531 GRADER END BIT RH/LHCaterpillar style bolt on right hand or left hand grader end bits for a 12G Caterpillar Grader. This is a grader end bit that is .625" thick, 6" wide and 18.375" in length. 16.76

8E7078 LEVEL CUT END BIT RH

Caterpillar style bolt on level cut end RH end bit for a D5 Caterpillar Bulldozer. This is .75" thick, 8" wide and 17.875" in length. It takes 4 of a 3/4" X 2 3/4" (750X275) plow bolt and 4 of a 3/4" (750 HEX NUT) hex nut. 26.00

8E7079 LEVEL CUT END BIT LHCaterpillar style bolt on level cut end LH end bit for a D5 Caterpillar Bulldozer. This is .75" thick, 8" wide and 17.875" in length. 26.00

8E9378 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1" thick, 8" wide and 18.50" in length. 36.16

8E9379 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1" thick, 8" wide and 18.50" in length. 36.16

8J6412 LEVEL CUT END BIT RH OR LHCaterpillar style bolt on end bit for a D3 Caterpillar Bulldozer. This is a level cut right hand or left hand end bit that is .75" thick, 6.5" wide and 13" in length. 15.87

8J8116 LH END BITCaterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 plow bolts and 9 - 100 hex nuts; Use Item # 3G8302 57.54

8J8117 RH END BITCaterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9 - 100x400 plow bolts and 9 - 100 hex nuts; Use Item # 3G8301 57.54

9J1477 RH END BITCaterpillar style right hand end bit that is 18 7/8" long, 10" wide, and 1 1/8" thick; takes 9 - 100x300 plow bolts and 9 - 100 hex nuts 57.31

9J1478 LH END BITCaterpillar style left hand end bit that is 18 7/8" long. 10" wide, and 1 1/8" thick; takes 9 - 100x300 plow bolts and 9 - 100 hex nuts 57.31

9W1764 GRADER END BIT RH/LHCaterpillar style bolt on right hand or left hand grader end bits for a 12G Caterpillar Grader. This is a grader end bit that is .625" thick, 6" wide and 18.375" in length. 16.76

9W1875 RH END BITCaterpillar style right hand end bit that is 18 1/4" long, 8 1/2" wide and 1 1/8" thick; takes 8 - 750x300 plow bolts and 8 - 750 hex nuts 56.44

9W1876 LH END BITCaterpillar style left hand end bit that is 18 1/4" long, 8 1/2" wide and 1 1/8" thick; takes 8 - 750x300 plow bolts and 8 - 750 hex nuts 56.44

9W4491 RH END BITCaterpillar style right hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts; Use Item # 8E4545 259.00

9W4492 LH END BITCaterpillar style left hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" thick; takes 9 - 125 X 400 plow bolts and 9 - 125 hex nuts; Use Item # 8E4546 259.00

9W6192 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2" thick, 16" wide and 24" in length. 155.00

9W6193 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2" thick, 16" wide and 24" in length. 155.00

9W6194 LH END BIT Caterpillar style left hand end bit for D8-9 doziers; Use Item # 8E4540 158.009W6195 RH END BIT Caterpillar style right hand end bit for D8-9 doziers; Use Item # 8E4539 158.00

9W6196 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2" thick, 19" wide and 29" in length. 255.00

9W6197 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2" thick, 19" wide and 29" in length. 255.00

9W6198 HOT CUPPED END BIT LHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1 3/8" thick, 13" wide and 24" in length. 111.33

9W6199 HOT CUPPED END BIT RHCaterpillar style bolt on end bit for a D7 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1 3/8" thick, 13" wide and 24" in length. 111.33

9W8874 LEVEL CUT END BIT RHCaterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1" thick, 10" wide and 18.375" in length. 44.09

9W8875 LEVEL CUT END BIT LHCaterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1" thick, 10" wide and 18.375" in length. 44.09

Caterpillar Style Grader Blades

138-6440 GRADER BLADE

Caterpillar style 1.75” X 16” X 47.75” flat, heat treated, 9 hole grader blade; takes 9 of a 1” X 3”(100X300) plow bolt and 9 of a 1”(100 HEX NUT) hex nut. The bolt hole spacing is 2.875” from the edge to the center of the 1st hole, and 3” from the center of the 1st hole to the center of the 2nd hole, and 6” from center of the 2nd hole to the center of the 3rd hole. 360.00

4D5757 RH GRADER OVERLAYCaterpillar style bolt on right hand grader overlay for a 120 Caterpillar Grader. This is a double beveled reversible bucket overlay blade that is .625" thick, 9" wide and 18.875" in length. 30.86

4D5758 LH GRADER OVERLAYCaterpillar style bolt on left hand grader overlay for a 120 Caterpillar Grader. This is a double beveled reversible bucket overlay blade that is .625" thick, 9" wide and 18.875" in length. 30.86

4D9922 GRADER BLADECaterpillar style 5/8" x 8" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow bolts and 15 - 5/8" hex nuts; Use Item # 5D-9561 107.58

4T2231 CURVED GRADER BLADECaterpillar style 1" X 8" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 3/4" X 2 3/4"(750X275) plow bolt and 13 of a 3/4"(750 HEX NUT) hex nut. 153.00




4T2243 GRADER BLADECaterpillar style 1" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 3/4"(625X275) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. Use Item # 7T3499 153.00

4T2244 GRADER BLADECaterpillar style 1" X 8" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 3/4"(625X275) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. 155.00

4T3007 GRADER BLADECaterpillar style 3/4" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 1/4"(625X225) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. 112.44




4T3037 FLAT GRADER BLADECaterpillar style 3/4" X 8" X 8" flat, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. 132.28

4T6511 FLAT GRADER BLADECaterpillar style 1" X 10" X 96" flat, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. 248.00

4T8317 FLAT GRADER BLADECaterpillar style 1.375" X 10" X 95.813" flat, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. 354.00

5D-9553 GRADER BLADECaterpillar style 5/8" x 6" x 6' curved, heat treated, 13 hole grader blade; takes 13 - 5/8" x 2 3/4" plow bolts and 13 - 5/8" hex nuts 66.13


5D-9557 GRADER BLADECaterpillar style .75" X 6" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 1/4"(750X225) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. 91.01


5D-9559 GRADER BLADECaterpillar style 3/4" x 8" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow bolts and 15 - 625 hex nuts 131.17


5D-9562 GRADER BLADECaterpillar style .625" X 8" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 1/4"(625X225) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. 91.01

5D9557 GRADER BLADECaterpillar style 3/4" x 6" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow bolts and 15 - 625 hex nuts 92.00

5D-9732 GRADER BLADECaterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is .75” thick, 8” wide and 96” long. 146.00

5J6970 GRADER BLADECaterpillar style 3/4" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 1/4"(625X225) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. Use Item # 4T3007 112.44



6Y2805 LH/RH GRADER OVERLAY

Caterpillar style bolt on left hand or right hand grader overlay for a 14G Caterpillar Grader. This is a right hand or left hand grader overlay for an 8” blade. It is .625” thick, 9.25” wide and 21.813” in length.

7D1158 GRADER BLADECaterpillar style 5/8" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. 108.91

7D1576 GRADER BLADECaterpillar style .75” X ” X 6’ curved, heat treated, 13 hole grader blade; takes 13 of a 3/4” X 2 1/4”(750X225) plow bolt and 13 of a 3/4”(750 HEX NUT) hex nut. 111.00

7D1577 GRADER BLADECaterpillar style 3/4" X 8" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. 132.28

7D1949 CURVED GRADER BLADECaterpillar style 3/4" X 8" X 8" curved, heat treated, 17 hole grader blade; takes 17 of a 3/4" X 2 3/4"(750X275) plow bolt and 17 of a 3/4"(750 HEX NUT) hex nut. 139.99

7D4508 GRADER BLADECaterpillar style .625” X 6” X 5’ curved, heat treated, 11 hole grader blade; takes 11 of a 5/8” X 2 1/4”(625X225) plow bolt and 11 of a 5/8”(625 HEX NUT) hex nut. 54.00


Caterpillar style bolt on right hand or left hand grader overlay for a 14G Caterpillar Grader. This is a double beveled reversible bucket overlay blade that is .625" thick, 9.25" wide and 23.375" in length. 35.27

7T-1623 GRADER BLADECaterpillar style 3/4" x 8" x 7' curved, carbon, 15 hole grader blade; takes 15 - 3/4" x 2 3/4" plow bolts and 15 - 3/4" hex nuts 132.28

7T-1631 GRADER BLADECaterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is .625” thick, 8” wide and 96” long. 122.00




7T-1637 GRADER BLADECaterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is .625” thick, 6” wide and 72” long. 64.40



7T3498 GRADER BLADECaterpillar style 1” X 8” X 7’ flat, heat treated, 15 hole grader blade; takes 15 of a 5/8” X 2 1/4”(625X225) plow bolt and 15 of a 5/8”(625 HEX NUT) hex nut. 178.00

7T3499 GRADER BLADECaterpillar style 1" X 8" X 6" flat, heat treated, 13 hole grader blade; takes 13 of a 5/8" X 2 3/4"(625X275) plow bolt and 13 of a 5/8"(625 HEX NUT) hex nut. 153.00

8D2786 GRADER BLADECaterpillar style .5” X 6” X 6’ curved, heat treated, 13 hole grader blade; takes 13 of a 5/8” X 2 1/4”(625X225) plow bolt and 13 of a 5/8”(625 HEX NUT) hex nut. 52.00


8J-4043 GRADER BLADECaterpillar style 5/8" x 6" x 8' curved, heat treated, 17 hole grader blade; takes 17 - 5/8" x 2 3/4" plow bolts and 17 - 5/8" hex nuts 91.05

8J9821 GRADER BLADECaterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is .625” thick, 8” wide and 96” long. 122.00

9J3657 CURVED GRADER BLADECaterpillar style .625" X 6" X 6" curved, heat treated, 13 hole grader blade; takes 13 of a 3/4" X 2 1/4"(750X225) plow bolt and 13 of a 3/4"(750 HEX NUT) hex nut. 64.99

9J3658 CURVED GRADER BLADECaterpillar style 5/8" X 6" X 7" curved, heat treated, 15 hole grader blade; takes 15 of a 3/4" X 2 3/4"(750X275) plow bolt and 15 of a 3/4"(750 HEX NUT) hex nut. 73.39

9J4405 RH END BITCaterpillar style bolt on right hand grader end bit for a 14G Caterpillar Grader. This is a grader end bit that is .625” thick, 6” wide and 18.625” in length. 18.08

9J4406 LH END BITCaterpillar style bolt on left hand grader end bit for a 14G Caterpillar Grader. This is a grader end bit that is .625” thick, 6” wide and 18.625” in length. 18.08


9J7701 GRADER BLADECaterpillar style grader blade for a Caterpillar Motor Grader. This is a curved grader blade that is .625” thick, 8” wide and 72” long. 92.00

9W-2299 GRADER BLADECaterpillar style 1/2" x 6" x 7' curved, carbon, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" plow bolts and 15 - 5/8" hex nuts 61.65

9W1767 LH/RH GRADER OVERLAY

Caterpillar style bolt on left hand and right hand grader overlay for a 140 Caterpillar Grader. This is a double beveled reversible bucket overlay blade that is .625" thick, 9.25" wide and 18.625" in length. 28.99

9W1768 LH/RH GRADER OVERLAY

Caterpillar style bolt on left hand or right hand grader overlay for a 12G Caterpillar Grader. This is a right hand or left hand grader overlay for an 8” blade. It is .625” thick, 9.25” wide and 21.813” in length. 34.00

T74753 GRADER BLADE

Caterpillar style .625” X 6” X 6’ curved, heat treated, 13 hole grader blade; takes 13 of a 3/4” X 2 1/4”(750X225) plow bolt and 13 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3” from the edge to the center of the 1st hole, and 3” from the center of the 1st hole to the center of the 2nd hole, and 6” from center of the 2nd hole to the center of the 3rd hole, Use Item #9J3657 65.00

Caterpillar Style Guards & Protectors112-2489 PROTECTOR Caterpillar style vertical shroud protector, takes 2 - 112-2490 pins and 2 - 8E5559 retainers 37.92

125-0800 PROTECTORCaterpillar style vertical shroud protector with a 3" opening, it is 40" long and has a 24" bolt hole spacing, center to center; takes 2 - 8E4708 pins and 2 - 4T4707 retainers 126.77

132-1014 EXTENDED GUARD Caterpillar style extended ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers 172.00132-1015 PROTECTOR Caterpillar style protector; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers 177.00132-4716EXT RIPPER GUARD Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers 52.56

135-8246 PROTECTORCaterpillar style protector for a 980G with a 9 1/2" bolt hole spacing; it is 18 1/4" long and is for a 1 1/8" lip thickness; takes a 135-9292 pin and an 8E6359 sleeved retainer 23.31

173-5422 RH CORNER PROTECTORCaterpillar style right hand corner protector for a J250 series, takes 2 - 100x300 plow bolts and 2 - 100 hex nuts; Use Item #253-0060 21.90

173-5423 LH CORNER PROTECTORCaterpillar style left hand corner protector for a J250 series, takes 2 - 100x300 plow bolts and 2 - 100 hex nuts; Use Item # 253-0061 21.90

173-5424 RH CORNER PROTECTORCaterpillar style right hand corner protector for a J300 series, takes 2 - 125x375 plow bolts and 2 - 125 hex nuts; Use Item # 253-0062 29.10


173-5426 RH CORNER PROTECTORCaterpillar style right hand corner protector for a J350 series, takes 2 - 125x375 plow bolts and 2 - 125 hex nuts; Use Item # 253-0064 36.30


173-5428 RH CORNER PROTECTORCaterpillar style right hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x 400 plow bolts and 2 - 125 hex nuts; Use Item # 253-0066 64.70

173-5429 LH CORNER PROTECTORCaterpillar style left hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x 400 plow bolts and 2 - 125 hex nuts; Use Item # 253-0067 64.70

1U0740 GUARDCaterpillar style guard with a 2 1/2" opening and is 23" long, takes 2 - 1U0739 pins and 2 - 8E5559 sleeved retainers 51.15

1U3644 GUARD Caterpillar style ripper guard; takes a 6Y3909 pin and a 4T4707 retainer 88.85

253-0060 RH CORNER PROTECTORCaterpillar style right hand, heavy duty, corner protector for a J250 series, takes 2 - 100 x 300 plow bolts and 2 - 100 hex nuts (for 916-943 models) 21.90

253-0061 LH CORNER PROTECTORCaterpillar style left hand, heavy duty, corner protector for a J250 series, takes 2 - 100 x 300 plow bolts and 2 - 100 hex nuts (for 916-943 models) 21.90





253-0066 RH CORNER PROTECTORCaterpillar style right hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x 400 plow bolts and 2 - 125 hex nuts (for 980-988 models) 64.70

253-0067 LH CORNER PROTECTORCaterpillar style left hand, heavy duty, corner protector for a J400-J460 series, takes 2 - 125 x 400 plow bolts and 2 - 125 hex nuts (for 980-988 models) 64.70

6I8310 LH CORNER PROTECTOR Caterpillar style left hand corner protector for a J300 series 13.456I8311 RH CORNER PROTECTOR Caterpillar style right hand corner protector for a J300 series 13.456J8814 GUARD Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers 31.096Y8960 GUARD Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers 85.986Y9704 GUARD Caterpillar style shank guard 117.39

7J1849 GUARD Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers; Use Item # 6J8814 31.098E1848 RIPPER GUARD Caterpillar style ripper guard; takes 2 - 6Y3394 pins and 2 - 8E4743 retainers 51.818E1848EXT EXTENDED GUARD Caterpillar style extended ripper guard, takes 2 - 6Y3909 pins 57.98

8E3414 PROTECTORCaterpillar style vertical protector; takes 2 - 8E4708 pins and 2 - 4T4707 retainers; Use Item #125-0800 126.77

8E3814 PROTECTORCaterpillar style vertical protector; takes 2 - 8E4708 pins and 2 - 4T4707 retainers; Use Item # 125-0800 126.77

8E5300 RH CORNER PROTECTOR Caterpillar style right hand corner protector for a J300 series 15.218E5301 LH CORNER PROTECTOR Caterpillar style left hand corner protector for a J300 series 15.21

8J4143 PROTECTORCaterpillar style protector with a 1 1/2" opening, it is 26" long and has a 14 1/2" bolt hole spacing, center to center; takes 2 - 9J8441 pins and 2 - 8E5559 sleeved retainers 45.08

9J9600 PROTECTORCaterpillar style side protector with a 1 1/2" opening, it is 23" long and has a 10" bolt hole spacing, center to center; takes 2 - 9J8442 pins and 2 - 6Y9459 retainers 39.68

9N4621 GUARD Caterpillar style ripper guard; takes 2 - 8E2229 pins and 2 - 8E2230 retainers 174.00

9W1820 GUARD Caterpillar style ripper guard; takes 2 - 8E2229 pins and 2 - 8E2230 retainers; Use Item # 9N4621 174.009W8365 GUARD Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers 90.619W8365EXT EXTENDED GUARD Caterpillar style extended ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers 103.84

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)Caterpillar Style Guides7J5355 RIGHT SIDE GUIDE Caterpillar style right side guide 9.597J5356 LEFT SIDE GUIDE Caterpillar style left side guide 9.598J7210 GUIDE Caterpillar style bolt-on, right hand guide, 10 1/16" long by 8 1/2" wide and 2 1/4" thick 18.008J7211 GUIDE Caterpillar style bolt-on, left hand guide, 10 1/16" long by 8 1/2" wide and 2 1/4" thick 18.00Caterpillar Style Heel Plates109-9215 HEEL PLATE Caterpillar style heel plate 103.83138-6529 HEEL PLATE Caterpillar style heel plate 29.76138-6551 HEEL PLATE Caterpillar style heel plate 37.706W6750 HEEL PLATE Caterpillar style bolt on heel plate 64.008075C HEEL PLATE Caterpillar style bolt on heel plate 28.669W6747 HEEL PLATE Caterpillar style heel plate 42.339W6748 HEEL PLATE Caterpillar style heel plate 42.339W6749 HEEL PLATE Caterpillar style heel plate 69.75Caterpillar Style Nuts1375 HEX NUT HEX NUT Caterpillar style 1 3/8” grade 8 hex nut 0.71150 HEX NUT HEX NUT Caterpillar style 150 HEX NUT Grade 8 Hex Nut 0.851B4332 HEX NUT Caterpillar style 7/8" hex nut (2J3505); Use Item #875 HEX NUT 0.201B4333 HEX NUT Caterpillar style 1" hex nut (2J3507); Use Item #100 hex nut 0.291B4433 HEX NUT Caterpillar style 5/8" hex nut; Use Item #625 hex nut 0.102C3657 HEX NUT Caterpillar style 3/4" hex nut (2J3506); Use Item #750 hex nut 0.152J3505 HEX NUT Caterpillar style 7/8" hex nut; Use Item #875 hex nut 0.202J3506 HEX NUT Caterpillar style 3/4" hex nut; Use Item #750 hex nut 0.152J3507 HEX NUT Caterpillar style 1" hex nut; Use Item #100 hex nut 0.293K9770 HEX NUT Caterpillar style 1 1/4" hex nut; Use Item #125 hex nut 0.543P1152 HEX NUT Caterpillar style 5/8" hex nut; Use Item #625 hex nut 0.103S8182 HEX NUT Caterpillar style 5/8" hex nut; Use Item #625 hex nut 0.104K0367 HEX NUT Caterpillar style 5/8" hex nut; Use Item #625 hex nut 0.104K4732 HEX NUT Caterpillar style 7/8" hex nut (2J3505); Use Item #875 HEX NUT 0.205/8 INCH-CS CAP SCREW NUT 5/8 inch cap screw nut, takes a 5/8 INCH X 2 INCH-CS cap screw 0.06500 HEX NUT HEX NUT Caterpillar style grade 8, 500 hex nut, 1/2 inch 0.055P8362 CONE NUT Caterpillar style 1 1/4" cone nut; Use Item #125 cone nut 0.52785189 HEX NUT Caterpillar style 1 1/4" hex nut; Use Item #125 hex nut 0.547/8" N HEX NUT Caterpillar style flange nut for a Bobcat assembly; Use Item #875 hex nut 0.207H3607 HEX NUT Caterpillar style 5/8" hex nut; Use Item #625 hex nut 0.107X5141 HEX NUT Caterpillar style 1 1/4" hex nut; Use Item #125 hex nut 0.547X5533 HEX NUT Caterpillar style 3/4" hex nut (2J3506); Use Item #750 hex nut 0.158J2933 CONE NUT Caterpillar style 1" cone nut; Use Item #100 cone nut 0.268P1851 HEX NUT Caterpillar style 5/8" hex nut; Use Item #625 hex nut 0.109B4315 HEX NUT Caterpillar style 1" hex nut (2J3507); Use Item #100 hex nut 0.29Caterpillar Style Packer Feet077-3220 PACKER FOOT Caterpillar style vibratory compactor foot, weld-on series for a CP323 4.80077-5764 PACKER FOOT Caterpillar style vibratory compactor foot, weld-on series for a CP323 7.601S7306 PACKER FOOT Caterpillar style pin on, soil compactor foot; Use Item # 7K2939 13.512V6628 PACKER FOOT Caterpillar style packer foot, weld-on soil foot for an 825C 11.682V7053 PACKER FOOT Caterpillar style packer foot, weld-on soil foot for an 815C; goes with a 7K6908 base 7.944V0668 PACKER FOOT Caterpillar style rock tamping foot for an 825C, takes a 7K7071 base 14.114V3851 ROCK TAMPER FOOT Caterpillar style rock tamping foot for an 815C, takes a 7K6908 base 8.69

7K2939 PACKER FOOTCaterpillar style pin on, soil compactor foot; takes 1 - 7K9535 pin, 1 - 5S1522 retainer and 1 - 9S1644 spring 13.51

7K6754 PACKER FOOT Caterpillar style bolt-on, soil compactor foot for an 825C and an 835; Use Item # 8K9171 13.517V9372 PACKER FOOT Caterpillar style weld on packer foot for an 815C; Use Item #2V7053 7.947X8009 PACKER FOOT Caterpillar style vibratory, weld on compactor foot for a CP64 13.62

8K9171 PACKER FOOTCaterpillar style bolt-on, soil compactor foot for an 825C and an 835; takes 2 - 8K9164 bolts, 2 - 7H3609 nuts and 2 - 4D6419 retainers 13.51

8K9189 PACKER FOOTCaterpillar style bolt-on, soil compactor foot for an 815; takes 2 - 8K9163 bolts, 2 - 7H3607 nuts and 2 - 5S0581 retainers 8.38

9S1429 PACKER FOOT Caterpillar style pin on, soil compactor foot; Use Item # 7K2939 13.51Caterpillar Style Pedestals

7K6908 PEDESTALCaterpillar style pedestal for an 8K9189 compactor foot; takes 2 - 8K9163 bolts, 2 - 7H3607 nuts and 2 - 5S0581 washers 9.48

7K6957 PEDESTALCaterpillar style pedestal for an 8K9189 compactor foot; takes 2 - 8K9163 bolts, 2 - 7H3607 nuts and 2 - 5S0581 washers; Use Item # 7K6908 9.48

7K7071 PEDESTALCaterpillar style pedestal for an 8K9171 compactor foot; takes 2 - 8K9163 bolts, 2 - 7H3607 nuts and 2 - 5S0581 washers 13.64

Caterpillar Style Pins1029062 PIN Caterpillar style pin; Use Item #3G0500 2.141073378 PIN Caterpillar style pin for a J550 series bucket tooth, takes an 8E5559 retainer; Use Item #1U1558 1.10

1140358 PINCaterpillar style grooved pin for a J350 series bucket tooth, takes an 8E6359 sleeved retainer; Use Item #9J2358 0.44

1140468 PINCaterpillar style pin for a J460 series bucket tooth, takes an 8E8469 sleeved retainer; Use Item #8E0468 0.88

1167408 PIN Caterpillar style pin for a J400 series bucket tooth, takes an 8E8409 retainer; Use Item #7T3408 0.79

1341808 PINCaterpillar style pin for a J800 series bucket tooth, takes a 101-2874 retainer; Use Item # 102-0101 3.85

1374762 PIN Caterpillar style pin for a J250 series bucket tooth, takes an 8E6259 retainer; Use Item # 9J2258 0.20077-2833 PIN H&L style flex pin for a 240 series bucket tooth; Use Item #24FP 0.12102-0101 PIN Caterpillar style pin for a J800 series bucket tooth, takes a 101-2874 retainer 3.85

107-3308 PINCaterpillar style pin for a J300 series bucket tooth, takes an 8E6259 sleeved retainer; Use Item #9J2308 0.24


107-3379 PINCaterpillar style pin for a J550 series bucket tooth, takes an 8E5559 retainer; same as a 6Y8558 and a 9W8026; Use Item # 1U1558 1.10

112-2490 PIN Caterpillar style pin, fits vertical protector 112-2489, takes an 8E5559 retainer 0.60112-9441 PIN Caterpillar style ripper pin; Use Item #9J8441 0.44113-4708 PIN Caterpillar style pin for a J700 series bucket tooth; Use Item # 9U9616 2.50113-9608 PIN Caterpillar style pin for a J600 series bucket tooth, takes a 6I6609 retainer; Use Item # 6I6608 2.20


114-0468 PINCaterpillar style pin for a J460 series bucket tooth, takes an 8E8469 sleeved retainer; Use Item #8E0468 0.88

116-3408 PIN Caterpillar style pin for a J400 series bucket tooth, takes an 8E8409 retainer; Use Item #7T3408 0.79132-4762 PIN Caterpillar style pin for a J225 series bucket tooth, takes a 3G9609 retainer; Use Item # 6Y3228 0.09

132-4763 PINCaterpillar style pin for a J250 series bucket tooth, takes an 8E6259 sleeved retainer; Use Item # 9J2258 0.20


133-0379 PIN Caterpillar style pin - can be used for a 1U0740 guard; Use Item # 1U0739 1.28133-0738 PIN Caterpillar style pin - can be used for a 1U0740 guard 0.99

134-1808 PINCaterpillar style pin for a J800 series bucket tooth, takes a 101-2874 retainer; Use Item # 102-0101 3.85

135-9292 PIN Caterpillar style pin for a 135-9246 0.30135-9350 PIN Caterpillar style ripper pin; Use Item #9J8441 0.44136-8308 RIPPER PIN Caterpillar style ripper pin, takes a 1U2405 retainer; Use Item #9J6583 0.491D3537 PIN Caterpillar style pin; takes a 5K1458 grommett; Use Item # 5K1459 0.551U0739 PIN Caterpillar style pin - can be used for a 1U0740 guard 1.281U1458 PIN Caterpillar style pin for a J450 series bucket tooth, takes an 8E6359 sleeved retainer 0.60

1U1558 PINCaterpillar style pin for a J550 series bucket tooth, takes an 8E5559 retainer; same as a 6Y8558 and a 9W8026 1.10

1U4208 PIN Caterpillar style pin for a J200 series bucket tooth; same as an 8E6208; Use Item # 9W7112 0.092Y4718 PIN Caterpillar style pin; takes a 5K1458 grommett; Use Item # 5K1459 0.553G0500 RIPPER PIN Caterpillar style ripper pin 2.144K0032 PIN Caterpillar style pin 0.104K0043 PIN Caterpillar style pin, takes a 4K0041 rubber lock 0.124T1458 PIN Caterpillar style pin for a J450 series bucket tooth, takes an 8E6359 retainer; Use Item #1U1458 0.604T2479 SPRING CLIP PIN Caterpillar style spring clip pin 1.004T4708 PIN Caterpillar style pin for a J700 series bucket tooth; Use Item #9U9616 2.505J9000 RIPPER PIN Caterpillar style ripper pin; Use Item # 4T2479 1.005K1459 PIN Caterpillar style pin; takes a 5K1458 grommett 0.55

68558 PINCaterpillar style pin for a J450 series bucket tooth, takes an 8E6359 sleeved retainer; Use Item #1U1458 0.60

6I6608 PIN Caterpillar style pin for a J600 series bucket tooth, takes a 6I6609 retainer 2.206J8811 RIPPER PIN Caterpillar style ripper pin 1.616R4289 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.096Y1204 RIPPER PIN Caterpillar style ripper pin for a R500 series bucket tooth, takes a 6Y1202 washer 1.946Y1207 PIN Caterpillar style ripper pin; Use Item #8E2229 2.606Y2527 PIN Caterpillar style pin for a J550 series bucket tooth, takes an 8E5559 retainer; Use Item #1U1558 1.106Y3228 PIN Caterpillar style pin for a J225 series bucket tooth, takes a 3G9609 retainer 0.096Y3394 RIPPER PIN Caterpillar style ripper pin 1.046Y3909 RIPPER PIN Caterpillar style ripper pin for a R500 series bucket tooth 1.906Y8558 PIN Caterpillar style pin for a J550 series bucket tooth, takes an 8E5559 retainer; Use Item #1U1558 1.1077-2833 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item #24FP 0.127J0812 RIPPER PIN Caterpillar style ripper pin; Use Item # 4T2479 1.00

7J6846 PINCaterpillar style pin for a J350 series bucket tooth, takes an 8E6359 sleeved retainer; same as a 9W2678 and an 8E6358; Use Item 9J2358 0.44

7J9600 RIPPER PIN Caterpillar style ripper pin; Use Item #6Y3394 1.047K9535 PACKER FOOT PIN Caterpillar style packer foot pin for a 7K2939 compactor foot 0.507T3408 PIN Caterpillar style pin for a J400 series bucket tooth 0.798E0468 PIN Caterpillar style pin for a J460 series bucket tooth, takes an 8E8469 retainer 0.888E2229 RIPPER PIN Caterpillar style ripper pin, takes an 8E2230 washer 2.608E4708 MODULOK PIN Caterpillar style modulok pin 1.97

8E6208 PIN Caterpillar style pin for a J200 series bucket tooth, takes an 8E6209 retainer; Use Item # 9W7112 0.098E6258 PIN Caterpillar style pin for a J250 series bucket tooth, takes an 8E6259 retainer; Use Item #9J2258 0.20

8E6358 PINCaterpillar style pin for a J350 series bucket tooth, takes an 8E6359 sleeved retainer; Use Item #9J2358 0.44

8J1458 PINCaterpillar style pin for a J450 series bucket tooth, takes an 8E6359 sleeved retainer; same as a 9W8296; Use Item # 1U1458 0.60

8J4258 PIN Caterpillar style pin for a J250 series bucket tooth, takes an 8E6259 retainer; Use Item # 9J2258 0.20

8J5308 PINCaterpillar style pin for a J300 series bucket tooth, takes an 8E6259 sleeved retainer; Use Item # 9J2308 0.24

8J8164 MODULOK PIN Caterpillar style 3/4" modulok ripper pin; Use Item # 9J8442 0.50937682 PIN Esco style pin for a 25 or a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.20952623 PIN Esco style pin for a 35 series bucket tooth, takes a 35-40LK lock; Use Item #35PN 0.22952653 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN 0.33955563 PIN Esco style pin for a 40 series bucket tooth; Use Item #40PN 0.57

964750 PINCaterpillar style pin for a J300 series bucket tooth, takes an 8E6259 sleeved retainer; Use Item # 9J2308 0.24

9F5116 PIN Caterpillar style pin; takes a 5K1458 grommett; Use Item # 5K1459 0.559F7666 PIN Caterpillar style pin; takes a 5K1458 grommett; Use Item # 5K1459 0.559J2258 PIN Caterpillar style pin for a J250 series bucket tooth, takes an 8E6259 retainer 0.209J2308 PIN Caterpillar style pin for a J300 series bucket tooth, takes an 8E6259 sleeved retainer 0.24


9J2358 PINCaterpillar style pin for a J350 series bucket tooth, takes an 8E6359 sleeved retainer; same as a 9W2678 and an 8E6358 0.44

9J4458 PINCaterpillar style pin for a J450 series bucket tooth, takes an 8E6359 sleeved retainer; Use Item # 1U1458 0.60

9J4558 PINCaterpillar style pin for a J550 series bucket tooth, takes an 8E5559 sleeved retainer; Use Item # 1U1558 1.10

9J6208 PIN Caterpillar style pin for a J200 series bucket tooth; Use Item # 9W7112 0.099J6583 RIPPER PIN Caterpillar style ripper pin; same as a 9W2668 0.499J8441 RIPPER PIN Caterpillar style 1" ripper pin 0.449J8442 MODULOK PIN Caterpillar style 3/4" modulok ripper pin 0.509J8811 RIPPER PIN Caterpillar style ripper pin; Use Item #6J8811 1.619N4245 PIN Caterpillar style ripper pin; Use Item #8E2229 2.609U9616 PIN Caterpillar style pin for a J700 series bucket tooth 2.509W2668 PIN Caterpillar style ripper pin; Use Item # 9J6583 0.49

9W2678 PINCaterpillar style pin for a J350 series bucket tooth, takes an 8E6359 sleeved retainer; Use Item # 9J2358 0.44

9W2688 PINCaterpillar style pin for a J450 series bucket tooth, takes an 8E6359 sleeved retainer; Use Item # 1U1458 0.60

9W2698 PINCaterpillar style pin for a J550 series bucket tooth, takes an 8E5559 sleeved retainer; Use Item # 1U1558 1.10

9W7112 PIN Caterpillar style pin for a J200 series bucket tooth; same as an 8E6208 0.099W8026 PIN Caterpillar style pin for a J550 series bucket tooth, takes an 8E5559 retainer; Use Item #1U1558 1.10

9W8296 PINCaterpillar style pin for a J450 series bucket tooth, takes an 8E6359 sleeved retainer; Use Item #1U1458 0.60

9W9026 PIN Caterpillar style pin for a J550 series bucket tooth, takes an 8E5559 retainer; Use Item #1U1558 1.10Caterpillar Style Plow Bolts0S-0484 BOLT Caterpillar style bolt 0.29100X500 PLOW BOLT Caterpillar style 100x500 grade 8 plow bolt; Use Item # 100X500 1.17125X600 PLOW BOLT Caterpillar style 125x600 grade 8 plow bolt; Use Item # 125X600 2.001375X550 PLOW BOLT Caterpillar style 1375X550 grade 8 plow bolt 2.561375X600 PLOW BOLT Caterpillar style 1375X600 grade 8 plow bolt 2.75150X600 PLOW BOLT Caterpillar style 150X600 Grade 8 Plow Bolt 3.501D4612 PLOW BOLT Caterpillar style 750x400 grade 8 plow bolt1D4630 PLOW BOLT Caterpillar style 875x400 grade 8 plow bolt1D4835 PLOW BOLT Caterpillar style 750x250 grade 8 plow bolt; Use Item #750X250 0.311J2034 PLOW BOLT Caterpillar style 100x500 grade 8 plow bolt1J3527 PLOW BOLT Caterpillar style 100X450 grade 8 plow bolt; Use Item # 100X450 1.051J5607 PLOW BOLT Caterpillar style 100x275 grade 8 plow bolt; Use Item # 100x275 0.702J2548 PLOW BOLT Caterpillar style 875x350 grade 8 plow bolt; Use Item # 875X350 0.663F4397 PLOW BOLT Caterpillar style 750x250 grade 8 plow bolt; Use Item #750X250 0.313F5108 PLOW BOLT Caterpillar style 625x225 grade 8 plow bolt; Use Item # 625X225 0.204F0138 PLOW BOLT Caterpillar style 750X300 grade 8 plow bolt; Use Item # 750X300 0.374F3649 PLOW BOLT Caterpillar style 500X200 grade 8 plow bolt; Use Item # 500X200 0.104F3653 PLOW BOLT Caterpillar style 625X175 grade 8 plow bolt; Use Item # 625X175 0.174F3654 PLOW BOLT Caterpillar style 625x200 grade 8 plow bolt; Use Item # 625X200 0.174F3656 PLOW BOLT Caterpillar style 625x250 grade 8 plow bolt; Use Item #625X250 0.224F3657 PLOW BOLT Caterpillar style 625x275 grade 8 plow bolt; Use Item # 625X275 0.274F3658 PLOW BOLT Caterpillar style 625x300 grade 8 plow bolt; Use Item # 625X300 0.294F3665 PLOW BOLT Caterpillar style 625x350 grade 8 plow bolt; Use Item # 625X350 0.334F3671 PLOW BOLT Caterpillar style 625x400 grade 8 plow bolt; Use Item # 625X400 0.384F3672 PLOW BOLT Caterpillar style 750x200 grade 8 plow bolt4F4042 PLOW BOLT Caterpillar style 100x300 grade 8 plow bolt; Use Item # 100X300 0.674F7827 PLOW BOLT Caterpillar style 750x225 grade 8 plow bolt; Use Item #750X225 0.284J9058 PLOW BOLT Caterpillar style 100x325 grade 8 plow bolt; Use Item #100X325 0.734J9208 PLOW BOLT Caterpillar style 100x350 grade 8 plow bolt; Use Item #100X350 0.7951627 PLOW BOLT Caterpillar style 750x450 grade 8 plow bolt; Use Item # 750X450 0.595/8 INCH X 2 INCH-CS CAP SCREW 5/8 inch by 2 inch cap screw, takes a 5/8 INCH-CS cap screw nut 0.20500X200 PLOW BOLT Caterpillar style 500X200 grade 8 plow bolt 0.1058X2 PLOW BOLT Caterpillar style 625x200 grade 8 plow bolt; Use Item # 625X200 0.1758X214 PLOW BOLT Caterpillar style 625x225 grade 8 plow bolt; Use Item # 625X225 0.205J2409 PLOW BOLT Caterpillar style 875x300 grade 8 plow bolt; Use Item #875X300 0.525J4771 PLOW BOLT Caterpillar style 750x275 grade 8 plow bolt5J4772 PLOW BOLT Caterpillar style 875x250 grade 8 plow bolt; Use Item # 875X250 0.445J4773 PLOW BOLT Caterpillar style 750x250 grade 8 plow bolt; Use Item #750X250 0.315P8136 PLOW BOLT Caterpillar style 100x400 plow bolt; Use Item # 100x400 0.925P8361 PLOW BOLT Caterpillar style 125x500 grade 8 plow bolt; Use Item # 125X500 1.865P8823 PLOW BOLT Caterpillar style 125x400 grade 8 plow bolt; Use Item # 125X400 1.72625X400 PLOW BOLT Caterpillar style 625x400 grade 8 plow bolt 0.386F0196 PLOW BOLT Caterpillar style 875x275 grade 8 plow bolt; Use Item # 875X275 0.486V6535 PLOW BOLT Caterpillar style 125x400 grade 8 plow bolt; Use Item # 125X400 1.726V8360 PLOW BOLT Caterpillar style 125x450 grade 8 plow bolt; Use Item # 125X450 1.94750X200 PLOW BOLT Caterpillar style 750x200 grade 8 plow bolt; Use Item # 750X200 0.26750X275 PLOW BOLT Caterpillar style 750x275 grade 8 plow bolt; Use Item # 750X275 0.34750X300 PLOW BOLT Caterpillar style 750x300 grade 8 plow bolt; Use Item # 750X300 0.37750X400 PLOW BOLT Caterpillar style 750x400 grade 8 plow bolt; Use Item # 750X400 0.53875X225 PLOW BOLT Caterpillar style 875x225 grade 8 plow bolt 0.40875X250 PLOW BOLT Caterpillar style 875x250 grade 8 plow bolt 0.44875X350 PLOW BOLT Caterpillar style 875x350 grade 8 plow bolt 0.66875X400 PLOW BOLT Caterpillar style 875x400 grade 8 plow bolt; Use Item # 875X400 0.75875X500 PLOW BOLT Caterpillar style 875x500 grade 8 plow bolt 0.988J2935 PLOW BOLT Caterpillar style 875X325 grade 8 plow bolt; Use Item # 875X325 0.60

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)8K9163 BOLT Caterpillar style bolt for an 8K9189 packer foot 0.208T0207 PLOW BOLT Caterpillar style 750x400 grade 8 plow bolt (1D4612; Use Item # 750x400 0.539F1351 PLOW BOLT Caterpillar style 875x500 grade 8 plow bolt; Use Item # 875X500 0.989F9522 PLOW BOLT Caterpillar style 875x225 grade 8 plow bolt; Use Item # 875X225 0.40Caterpillar Style Protectors6Y8960EXT EXTENDED GUARD Caterpillar style extended guard 125.22Caterpillar Style Ripper Shanks

104-9275 RIPPER SHANKCaterpillar style ripper shank for a D11 Caterpillar Bulldozer. This ripper is 4.33" thick, 17.72" wide and 129.6" long. 2734.00

3G0109 RIPPER SHANK Caterpillar style ripper shank that is 20" long, 5 1/2" wide and 2 3/8" thick; Use Item # 9J8913 70.55

5A9536 RIPPER SHANKCaterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer; Use Item # 9J3139 115.71

7J2459 RIPPER SHANK Caterpillar style ripper shank for a motor grader 364.00

7J6671 RIPPER SHANKCaterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer; Use Item # 9J3139 115.71

8E5339 RIPPER SHANKCaterpillar style ripper shank for a D9 Caterpillar Bulldozer. This ripper is 2.94" thick, 13" wide and 91.8" long. 926.00

8E5340 RIPPER SHANKCaterpillar style ripper shank for a D8 Caterpillar Bulldozer. This ripper is 2.94" thick, 13.07" wide and 96.8" long. 999.00

8E5342 RIPPER SHANKCaterpillar style ripper shank for a D8 Caterpillar Bulldozer. This ripper is 2.94" thick, 13" wide and 75.16" long. 765.00

8E5346 RIPPER SHANKCaterpillar style ripper shank for a D8/D9 Caterpillar Bulldozer. This ripper is 2.94" thick, 13" wide and 63.4" long. 638.00

8E5347 RIPPER SHANKCaterpillar style ripper shank for a D8 Caterpillar Bulldozer. This ripper is 2.94" thick, 13.07" wide and 79.13" long. 805.00

8E8413 RIPPER SHANKCaterpillar style ripper shank for a D10/D11 Caterpillar Bulldozer. This ripper is 4" thick, 15.75" wide and 77.85" long. 1367.00



8J1434 RIPPER SHANKCaterpillar style ripper shank for a motor grader, takes a 6Y0309 ripper tooth, a 9J6583 pin and a 8E6359 sleeved retainer; Use Item # 9J6586 54.01

8J3215 RIPPER SHANKCaterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer; Use Item # 9J3139 115.71

9J3139 RIPPER SHANKCaterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer 115.71

9J6586 RIPPER SHANKCaterpillar style ripper shank for a motor grader, takes a 6Y0309 ripper tooth, a 9J6583 pin and a 8E6359 sleeved retainer 54.01

9J8913 RIPPER SHANKCaterpillar style ripper shank that is 20" long, 5 1/2" wide and 2 3/8" thick, takes a 6Y0309 ripper tooth 70.55

9J8923 RIPPER SHANK Caterpillar style curved ripper shank, takes a 6Y0359 ripper tooth 125.00

9W7382 RIPPER SHANKCaterpillar style ripper shank that is 48 3/4" long, 9" wide and 3" thick, takes a 6Y0359 ripper tooth 375.00

Caterpillar Style Router Bits2209150 ROUTER BIT Caterpillar style router bit for a scraper 115.741C6081 ROUTER BIT Caterpillar style 5 bolt router bit for a scraper; Use Item # 4J8665 53.222J9192 ROUTER BIT Caterpillar style 5 bolt router bit for a scraper; Use Item # 4J8665 53.224J8665 ROUTER BIT Caterpillar style 5 bolt router bit for a scraper 53.224T0668 ROUTER BIT Caterpillar style router bit 87.087J3023 ROUTER BIT Caterpillar style 5 bolt router bit for a scraper 87.08Caterpillar Style Scarifier Shanks

1957218 SCARIFIER SHANKCaterpillar style scarifier shank for a motor grader; takes a 5K-1459 pin and a 5K-1458 bushing; Use Item # 9F5124 11.02

101-(2000)-SB SCARIFIER SHANK Caterpillar style SBIC scarifier shank; takes a 2D5572 scarifier tooth 11.90

101(2000) SCARIFIER SHANKCaterpillar style scarifier shank for a motor grader; SX2000; the dimensions are 1" in height, 3" in width and 17 1/4" in length; takes a 2D5572 scarifier tooth 12.32

195-7219 SCARIFIER SHANK Caterpillar style scarifier shank for a motor grader, takes a 5K1459 pin and a 5K1458 grommet 10.70

5B6251 SCARIFIER SHANKCaterpillar style scarifier shank for a motor grader; the dimensions are 1" in height, 2.2" in width and 15 1/8" in length 9.92

5V4311 FINGER SHANK Caterpillar style finger shank for a compactor 21.16

9F5124 SCARIFIER SHANKCaterpillar style scarifier shank for a motor grader; takes a 5K-1459 pin and a 5K-1458 bushing; the dimensions are 1" in height, 3" in width and 17 1/4" in length 11.02

SX2000 SCARIFIER SHANKCaterpillar style scarifier shank for a motor grader; SX2000; takes a 2D5572 scarifier tooth; Use Item # 101(2000) 12.32

Caterpillar Style Segments

100-6666 SEGMENTCaterpillar style bolt on segment for a Caterpillar 966 Front End Loader. This is a double beveled reversible bucket segment that is 1.19" thick, 14.17" wide and 11.54" in length. 49.60

100-6666NR END SEGMENTCaterpillar style half arrow, non-reversible end segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts 56.10

100-6668NR CENTER SEGMENTCaterpillar style half arrow, non-reversible center segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts 200.00

101-9435NRC CENTER SEGMENTCaterpillar style half arrow, non-reversible center segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts 97.90

101-9436NRR RH SEGMENTCaterpillar style half arrow, non-reversible, right hand segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts 97.45

101-9437NRL LH SEGMENTCaterpillar style half arrow, non-reversible, left hand segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts 97.45

107-3490 SEGMENTCaterpillar style bolt on segment for a 988 Caterpillar Front End Loader. This is a double beveled reversible bucket segment that is 1.75” thick, 19” wide and 12.25” in length. 100.80


107-3491 RH SEGMENTCaterpillar style bolt on right hand segment for a 988 Caterpillar Front End Loader. This is a double beveled reversible bucket segment that is 1.75” thick, 19” wide and 17.75” in length. 108.20

107-3492 LH SEGMENTCaterpillar style bolt on left hand segment for a 988 Caterpillar Front End Loader. This is a double beveled reversible bucket segment that is 1.75” thick, 19” wide and 17.75” in length. 108.20

107-3536 SEGMENTCaterpillar style bolt on segment for a 988 Caterpillar Front End Loader. This is a double beveled reversible bucket segment that is 1.75” thick, 19” wide and 13.625” in length. 114.70

107-3537 RH SEGMENTCaterpillar style bolt on right hand segment for a 988 Caterpillar Front End Loader. This is a double beveled reversible bucket segment that is 1.75” thick, 19” wide and 19” in length. 124.12

107-3538 LH SEGMENTCaterpillar style bolt on left hand segment for a 988 Caterpillar Front End Loader. This is a double beveled reversible bucket segment that is 1.75” thick, 19” wide and 19” in length. 124.12

109-2675C CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 4 -125x400 plow bolts and 4 - 125 hex nuts 218.00

109-2676R RH SEGMENTCaterpillar style half arrow, non-reversible, right hand segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts 237.00

109-2677L LH SEGMENTCaterpillar style half arrow, non-reversible, left hand segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts 237.00

109-9019 SEGMENTCaterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled reversible bucket segment that is 1.1875" thick, 14.1719" wide and 12.5" in length. 49.16

109-9019NR HALF ARROW SEGMENT Caterpillar style half arrow, non reversible center segment for a loader 59.00

109-9080C CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts 98.11



109-9212NR CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts 265.00

113-3140C CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts 74.80



116-7460 CENTER SEGMENTCaterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts; Use Item #9W5734NRC 84.12

116-7461 LH SEGMENTCaterpillar style half arrow, non reversible, left hand segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts; Use Item #9W5737NRL 86.20

116-7462 RH SEGMENTCaterpillar style half arrow, non reversible, right hand segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts; Use Item #9W5730NRR 86.20

119-9600 CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts; Use Item # 109-9080C 98.11

132-4715 SEGMENTCaterpillar style bolt on segment for a Caterpillar 950 Front End Loader. This is a double beveled reversible bucket segment that is 1.375" thick, 12" wide and 10.9375" in length. 45.19

132-4715NR CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts 51.58

135-9394 CENTER EDGECaterpillar style bolt on center cutting edge for a Case Skid Steer. This is a double beveled reversible bucket center cutting edge that is .625” thick, 6.5” wide and 62.52” in length. 65.00

135-9544NRC CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts 80.47

135-9545NRR RH SEGMENTCaterpillar style half arrow, non-reversible, right hand segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts 85.98

135-9546NRL LH SEGMENTCaterpillar style half arrow, non-reversible, left hand segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts 85.98


Caterpillar style bolt on center cutting edge for a 966 Caterpillar Front End Loader. This is a double beveled reversible bucket center cutting edge that is 1.375” thick, 14.17” wide and 55.1” in length. 269.80

167-7430 END EDGECaterpillar style bolt on end cutting edge for a 966 Caterpillar Front End Loader. This is a double beveled reversible bucket end cutting edge that is 1.625” thick, 20.18” wide and 8” in length. 63.60

173-7447NR SEGMENTCaterpillar style half arrow, non-reversible segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts 58.87

174-4114NR SEGMENTCaterpillar style half arrow, non-reversible segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts 52.52

174-4115 SEGMENTCaterpillar style half arrow, non-reversible segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts; Use Item #109-9019 59.00

174-4116 END SEGMENTCaterpillar style half arrow, non-reversible end segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts; Use Item # 100-6666NR 56.10

195-7190 CENTER SEGMENT Caterpillar style center segment 191.80195-7191 RH SEGMENT Caterpillar style right hand segment 202.82195-7192 LH SEGMENT Caterpillar style left hand segment 202.82

1U0593NR CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts 180.00

1U0761NR END SEGMENTCaterpillar style half arrow, non-reversible, end segment for a loader, takes 6 - 125x400 plow bolts and 6 - 125 hex nuts 76.28

1U0762NR CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts 256.00

217-4725 END SEGMENTCaterpillar style half arrow, non-reversible, end segment for a loader, takes 6 - 125x400 plow bolts and 6- 125 hex nuts; Use Item #1U0761NR 76.28

217-4726 END SEGMENTCaterpillar style half arrow, non-reversible, end segment for a loader, takes 6 - 125x400 plow bolts and 6- 125 hex nuts; Use Item #1U0761NR 76.28

217-4727 CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts; Use Item #109-9212NR 265.00


275-5470 CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts; Use Item # 109-2675C 218.00

275-5471 RH SEGMENTCaterpillar style half arrow, non-reversible, right hand segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts; Use Item # 109-2676R 237.00

275-5472 LH SEGMENTCaterpillar style half arrow, non-reversible, left hand segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts; Use Item # 109-2677L 237.00

3G6395NRL LH SEGMENTCaterpillar style half arrow, non-reversible, left hand segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts 61.95

3G6395NRR RH SEGMENTCaterpillar style half arrow, non-reversible, right hand segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts 61.95

4T3015 CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 2 - 125x400 plow bolts and 2 - 125 hex nuts; Use Item #113-3140C 74.80

4T6692 SEGMENTCaterpillar style bolt-on, reversible segment for a 953 series loader; takes 2 - 100x300 plow bolts and 2 - 100 hex nuts 22.82


4T6694 SEGMENTCaterpillar style bolt on segment for a Caterpillar Front End Loader. This is a double beveled reversible bucket segment that is 1" thick, 11" wide and 8.875" in length. 24.25

4T6695 SEGMENTCaterpillar style bolt on segment for a Caterpillar Front End Loader. This is a double beveled reversible bucket segment that is 1" thick, 11" wide and 10.4375" in length. 27.56


4T6697 SEGMENTCaterpillar style bolt on, reversible segment for a 953 series loader; takes 2 - 125x400 plow bolts and 2 - 125 hex nuts 30.00

4T6698 SEGMENTCaterpillar style bolt on segment for a 973 Caterpillar Front End Loader. This is a double beveled reversible bucket segment that is 1.18” thick, 14.17” wide and 9.5” in length. 37.80



4T6760 CENTER SEGMENTCaterpillar style half arrow, non-reversible, center segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts; Use Item #109-2675C 218.00

4T6761 LH SEGMENTCaterpillar style half arrow, non-reversible, left hand segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts; Use Item #109-2677L 237.00

4T6762 RH SEGMENTCaterpillar style half arrow, non-reversible, right hand segment for a loader, takes 4 - 125x400 plow bolts and 4 - 125 hex nuts; Use Item #109-2676R 237.00

4T7139 RH SEGMENT Caterpillar style right hand segment 54.014T7140 LH SEGMENT Caterpillar style left hand segment 54.01

4T7183 RH SEGMENTCaterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled right hand bucket segment that is 1.375" thick, 19" wide and 17.75" in length. 90.39

4T7184 LH SEGMENTCaterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled left hand bucket segment that is 1.375" thick, 19" wide and 17.75" in length. 90.39

4T7189 CENTER SEGMENTCaterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled reversible bucket segment that is 1.375" thick, 19" wide and 12.25" in length. 88.18

8E4569 SEGMENTCaterpillar style bolt on segment for a 924 Caterpillar Front End Loader. This is a double beveled reversible bucket cutting edge that is 1” thick, 11” wide and 9.75” in length. 26.00

8E9514C CENTER SEGMENT Caterpillar style modulok center segment for a loader 85.778E9515RH RH SEGMENT Caterpillar style modulok right hand segment for a loader 72.578E9516LH LH SEGMENT Caterpillar style modulok left hand segment for a loader 73.67

9W5730 LH SEGMENTCaterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled left hand bucket segment that is 1.375" thick, 19" wide and 17.75" in length. 90.39

9W5730NRR RH SEGMENTCaterpillar style half arrow, non reversible, right hand segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts 86.20

9W5734 CENTER SEGMENTCaterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled reversible bucket segment that is 1.375" thick, 19" wide and 12.25" in length. 88.18

9W5734NRC CENTER SEGMENTCaterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 125x400 plow bolts and 3 - 125 hex nuts 84.12

9W5737 RH SEGMENTCaterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled right hand bucket segment that is 1.375" thick, 19" wide and 17.75" in length. 90.39

9W5737NRL LH SEGMENTCaterpillar style half arrow, non reversible, left hand segment for a loader; takes 3 - 125x400 plow bolts and 3 - 125 hex nuts 86.20

Caterpillar Style Shank Noses & Adapters103-8115 RIPPER SHANK ADAPTER Caterpillar style ripper shank adapter 179.001U3630 RIPPER SHANK ADAPTER Caterpillar style ripper shank adapter 230.004T8315 RIPPER SHANK ADAPTER Caterpillar style ripper shank adapter for a motor grader; Use Item # 8E8418 167.007J1791 RIPPER SHANK ADAPTER Caterpillar style ripper shank adapter - 75 x 360 x 586 164.008E7300 RIPPER SHANK NOSE Caterpillar style ripper shank nose, takes a 9J6583 ripper pin and a 1U2405 retainer 7.728E8418 RIPPER SHANK ADAPTER Caterpillar style ripper shank adapter for a motor grader 167.009U9694 RIPPER SHANK NOSE Caterpillar style ripper shank nose 42.54Caterpillar Style Sidecutters

964747 LH SIDECUTTERCaterpillar style left hand, 4 bolt sidecutter for an excavator, takes 4 - 875x300 plow bolts and 4 - 875 hex nuts; Use Item # 096-4747 28.88

964748 RH SIDECUTTERCaterpillar style right hand, 4 bolt sidecutter for an excavator, takes 4 - 875x300 plow bolts and 4 - 875 hex nuts; Use Item # 096-4748 28.88

096-4747 LH SIDECUTTERCaterpillar style left hand, 4 bolt sidecutter for an excavator; takes 4 - 875x300 plow bolts and 4 - 875 hex nuts 28.88

096-4748 RH SIDECUTTERCaterpillar style right hand, 4 bolt sidecutter for an excavator; takes 4 - 875x300 plow bolts and 4 - 875 hex nuts 28.88

112-2487 RH SIDECUTTERCaterpillar style right hand, 4 bolt sidecutter for an excavator; takes 4 - 100x400 plow bolts and 4 - 100 hex nuts 63.71

112-2488 LH SIDECUTTERCaterpillar style left hand, 4 bolt sidecutter for an excavator; takes 4 - 100x400 plow bolts and 4 - 100 hex nuts 63.71


140357 LH SIDECUTTERCaterpillar style left hand, 3 bolt sidecutter for an excavtor; takes 3 - 100 X 300 plow bolts and 3 - 100 hex nuts; Use Item # 8J9614 49.16

140358 RH SIDECUTTERCaterpillar style right hand, 3 bolt sidecutter for an excavator; takes 3 - 100 X 300 plow bolts and 3 - 100 hex nuts; Use Item # 8J9615 49.16

232-2147 RH SIDECUTTERCaterpillar style right hand, 4 bolt sidecutter for an excavator; takes 4 - 100x400 plow bolts and 4 - 100 hex nuts; Use Item # 112-2487 63.71

232-2148 LH SIDECUTTERCaterpillar style left hand, 4 bolt sidecutter for an excavator; takes 4 - 100x400 plow bolts and 4 - 100 hex nuts; Use Item # 112-2488 63.71

7Y0203 LH SIDECUTTERCaterpillar style left hand, 4 bolt sidecutter for an excavator; takes 4 - 100x275 plow bolts and 4 - 100 hex nuts 16.98

7Y0204 RH SIDECUTTERCaterpillar style right hand, 4 bolt sidecutter for an excavator; takes 4 - 100x275 plow bolts and 4 - 100 hex nuts 16.98

7Y0357 RH SIDECUTTERCaterpillar style right hand, 3 bolt sidecutter for an excavator; takes 3 - 100 X 300 plow bolts and 3 - 100 hex nuts 39.46

7Y0358 LH SIDECUTTERCaterpillar style left hand, 3 bolt sidecutter for an excavator; takes 3 - 100 X 300 plow bolts and 3 - 100 hex nuts 39.46

8J3177 RH SIDECUTTERCaterpillar style right hand, 3 bolt sidecutter for an excavator; takes 3 - 100 X 300 plow bolts and 3 - 100 hex nuts; Use Item # 8J9615 49.16

8J3178 LH SIDECUTTERCaterpillar style left hand, 3 bolt sidecutter for an excavtor; takes 3 - 100 X 300 plow bolts and 3 - 100 hex nuts; Use Item # 8J9614 49.16

8J9614 LH SIDECUTTERCaterpillar style left hand, 3 bolt sidecutter for an excavtor; takes 3 - 100 X 300 plow bolts and 3 - 100 hex nuts 49.16

8J9615 RH SIDECUTTERCaterpillar style right hand, 3 bolt sidecutter for an excavator; takes 3 - 100 X 300 plow bolts and 3 - 100 hex nuts 49.16

8J9825 RH SIDECUTTERCaterpillar style right hand, 5 bolt sidecutter for an excavator; takes 5 - 100 X 350 plow bolts and 5 - 100 hex nuts 69.67

8J9826 LH SIDECUTTERCaterpillar style left hand, 5 bolt sidecutter for an excavator; takes 5 - 100 X 350 plow bolts and 5 - 100 hex nuts 69.67

MSC-L SIDECUTTER Caterpillar style 3 bolt sidecutter, takes 3 - 625x200 plow bolts and 3 - 625 hex nuts 2.40MSC-R SIDECUTTER Caterpillar style 3 bolt sidecutter, takes 3 - 625x200 plow bolts and 3 - 625 hex nuts 2.40Caterpillar Style Teeth

1003130 HD TOOTHCaterpillar style J350 series heavy duty bucket tooth; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item #9N4352 16.87

1010705 TWIN TIGER TOOTHCaterpillar style J200 series twin tiger bucket tooth; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item #1U3202WT 3.86

1010707 TWIN TIGER TOOTHCaterpillar style J250 series twin tiger bucket tooth; takes a 9J2258 pin and and 8E6209 sleeved retainer; Use Item #1U3252WTL 8.75

1010708 TWIN TIGER TOOTHCaterpillar style J300 series twin tiger bucket tooth; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item #1U3302WTL 11.02

1010709 TWIN TIGER TOOTHCaterpillar style J350 series twin tiger bucket tooth; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item #1U3352WTL 16.47

1010710 TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer; Use Item # 7T3402WTL 25.13

1010711 TWIN TIGER TOOTHCaterpillar style J450 series twin tiger bucket tooth; takes an 8E0468 pin and an 8E8409 sleeved retainer; Use Item #1U3452WTL 29.32

1010712 TWIN TIGER TOOTHCaterpillar style J550 series twin tiger bucket tooth; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item #1U3552WTL 40.56

1073300 FLARE TOOTHCaterpillar style J300 series flare bucket tooth; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item #4T1300 11.46

1073350 FLARE TOOTHCaterpillar style J350 series flare bucket tooth; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item #8J3350 17.64

1073550 FLARE TOOTHCaterpillar style J550 series flare bucket tooth; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item #7J9550 55.34

2085254 FLARE TOOTHCaterpillar style flare bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer; Use Item # 3G8250 7.50

077-2832 FABRICATED TOOTH H&L style bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #24F 3.09

099-4835 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer; Use Item # 1U3252 6.17

107-1300 FLARE TOOTHCaterpillar style flare bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 4T1300 11.46

107-3400 FLARE TOOTHCaterpillar style flare bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer; Use Item #7T3402F 26.45

107-3450 FLARE TOOTHCaterpillar style J450 series flare bucket tooth; takes a 1U1458 pin and an 8E8469 sleeved retainer(or an 8E0468 pin and an 8E8469 sleeved retainer); Use Item #8J1450 37.04

107-8609 TIGER TOOTHCaterpillar style tiger bucket tooth for a J600 series, takes a 6I6608 pin and a 6I6609 sleeved retainer; Use Item # 6I6602TL 72.31

109-9200 FLARE TOOTHCaterpillar style flare bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item #1U3202F 3.31

114-0453 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 6Y3394 pin and an 8E5559 sleeved retainer; Use Item # 4T4453 43.21

116-7459 DIRT TOOTHCaterpillar style dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer); Use Item #9W8452 24.85

125-8302 HD TOOTHCaterpillar style HD bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item #9N4302 12.78

132-4720 UNITOOTHCaterpillar style unitooth for a skidsteer; distance between bolt holes is 2 3/8" center to center; takes 2 - 625 x 200 allen head bolts and 2 - 625 lock nuts 3.99

135-8203 UNITOOTHCaterpillar style unitooth with a .80" lip thickness for a J200 series; the bolt holes are 3" center to center; takes 2 - 625x250 plow bolts and 2 - 625 hex nuts 6.00

135-8208 TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item #1U3202WT 3.86

135-8228 TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J225 series, takes a 6Y3228 pin and a 3G9609 retainer; Use Item # 6Y3222WT 5.62


135-8258 TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6209 sleeved retainer; Use Item #1U3252WTL 8.75

135-9300 ROCK PENETRATOR TOOTHCaterpillar style rock penetration bucket tooth for a J300 series, takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 4T2303RP2 18.95

135-9308 TWIN TIGER TOOTHCaterpillar style twin tiger long bucket tooth for a J300 series, takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item #1U3302WTL 11.02

135-9357 TWIN TIGER TOOTHCaterpillar style twin tiger long bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item #1U3352WTL 16.47

135-9358 TWIN TIGER TOOTHCaterpillar style twin tiger long bucket tooth for a J350 series, takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # 1U3352WTL 16.47

135-9390 UNITOOTH Caterpillar style unitooth, takes 2 - 5/8" bolts and nuts 4.04

135-9400 HEAVY DUTY TOOTHCaterpillar style heavy duty bucket tooth for a J400 series, takes a 7T3408 pin and an 8E8409 sleeved retainer 39.68

135-9408 TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer; Use Item #7T3402WTL 25.13

135-9600 ROCK PENETRATORCaterpillar style rock penetrator bucket tooth for a J600 series, takes a 6I6608 pin and a 6I6609 retainer 110.89

135-9608 TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J600 series, takes a 6I6608 pin and a 6I6609 sleeved retainer; Use Item # 6I6602WTL 80.47

135-9700 HEAVY DUTY TOOTHCaterpillar style heavy duty bucket tooth for a J700 series, takes a 9U9616 pin and a 4T4707 retainer 159.00

135-9800 ROCK PENETRATOR TOOTH Caterpillar style rock penetrator tooth for a J800 series 221.56

138-6451 HD PENETRATOR TOOTHCaterpillar style heavy duty penetrator bucket tooth for a J450 series; takes an 8E0468 pin and an 8E8469 sleeved retainer 48.06

138-6458 TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J450 series; takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item #1U3452WTL 29.32

138-6558 TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J550 series, takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 1U3552WTL 40.56

144-1358 HEAVY DUTY TOOTHCaterpillar style heavy duty bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 27.34

159-0400 TIGER TOOTHCaterpillar style tiger bucket tooth for a J400 series, takes a 7T3408 pin and an 8E8409 retainer; Use Item # 7T3402TL 20.59

159-0450 PENETRATION PLUS TOOTHCaterpillar style rock penetrator plus bucket tooth for a J450 series; takes an 8E0468 pin and an 8E8469 sleeved retainer 25.79

159-0459 DIRT TOOTHCaterpillar style dirt bucket tooth for a J450 series, takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item # 9W8452 24.85

159-0559 PENETRATION PLUS TOOTHCaterpillar style rock penetrator plus bucket tooth for a J550 series, takes a 1U1558 pin and an 8E5559 sleeved retainer 52.03

168-1300 TIGER TOOTHCaterpillar style tiger long bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item #1U3302TL 9.92

168-1359 PENETRATION PLUS TOOTHCaterpillar style rock penetrator plus bucket tooth for a J350 series, takes a 9J2358 pin and an 8E6359 sleeved retainer 15.87

168-1409 PENETRATION PLUS TOOTHCaterpillar style rock penetrator plus bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 24.47

173-7447 SEGMENTCaterpillar style bolt-on, reversible segment for a 953 series loader; takes 2 - 125x400 plow bolts and 2 - 125 hex nuts; Use Item #4T6700 52.14

174-4114 SEGMENTCaterpillar style bolt-on, reversible segment for a 953 series loader; takes 2 - 125x400 plow bolts and 2 - 125 hex nuts; Use Item #4T6699 47.30

183-5300PENETRATION PLUSTOOTH

Caterpillar style rock penetration plus bucket tooth for a J300 series, takes a 9J2308 pin and an 8E6259 sleeved retainer 12.35

1C6380 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 6Y0309 11.91

1C6456 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer; Use Item # 6Y0359 27.34

1U1857 UNITOOTHCaterpillar style unitooth with a 1 1/8" lip thickness and a 5" bolt hole spacing from center to center; takes 2 - 100x375 plow bolts and 2 - 100 hex nuts 22.05

1U1877HD HEAVY DUTY UNITOOTHCaterpillar style heavy duty unitooth with a 1 1/8" lip thickness and a 5" bolt hole spacing from center to center; takes 2 - 100x375 plow bolts and 2 - 100 hex nuts 27.56

1U1887 UNITOOTHCaterpillar style unitooth with a 1 3/8" lip thickness and a 6 3/8" bolt hole spacing from center to center; takes 2 - 125x500 plow bolts and 2 - 125 hex nuts 49.16

1U1903 SHORT TOOTHCaterpillar style short, dirt bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # 1U3351 13.12

1U3201 SHORT TOOTHCaterpillar style short bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer 2.65

1U3202 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer 3.09

1U3202F FLARE TOOTHCaterpillar style flare bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer 3.31

1U3202T TIGER TOOTHCaterpillar style tiger bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer 3.29

1U3202T-SB TIGER TOOTHCaterpillar style SBIC tiger bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer 2.51

1U3202WT TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer 3.86

1U3209 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer 2.21

1U3251 SHORT TOOTHCaterpillar style short, dirt bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 5.95

1U3252 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 6.17

1U3252-SB DIRT TOOTHCaterpillar style SBIC standard, dirt bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 7.10


1U3252F FLARE TOOTHCaterpillar style flare bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer; Use Item # 3G8250 7.50

1U3252RC ROCK CHISEL TOOTHCaterpillar style rock chisel bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 8.32

1U3252SYL SYL TOOTHCaterpillar style SYL bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 7.06

1U3252TL TIGER TOOTHCaterpillar style tiger bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 6.42

1U3252TL-SB TIGER TOOTHCaterpillar style SBIC tiger bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 6.50

1U3252WT TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J250 series, takes a 9J2258 pin and an 8E6259 sleeved retainer 7.50

1U3252WTL TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 8.75

1U3252WTL-SB TWIN TIGER TOOTHCaterpillar style SBIC twin tiger bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 7.70


1U3302 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 9.04

1U3302F FLARE TOOTHCaterpillar style flare bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item #4T1300 11.46

1U3302-SB DIRT TOOTHCaterpillar style SBIC dirt bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 9.30

1U3302PT ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 16.31



1U3302TL TIGER TOOTHCaterpillar style tiger long bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 9.92

1U3302TL-SB TIGER TOOTHCaterpillar style SBIC tiger bucket tooth for a J300 series, takes a 9J2308 pin and an 8E6259 retainer 10.10

1U3302WTL TWIN TIGER TOOTHCaterpillar style twin tiger, long bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 11.02

1U3302WTL-SB TWIN TIGER TOOTHCaterpillar style SBIC twin tiger long bucket tooth for a J300 series, takes a 9J2308 pin and an 8E6259 retainer 11.50


1U3352 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 13.16

1U3352F FLARE TOOTHCaterpillar style flare bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleevedretainer; Use Item #8J3350 17.64

1U3352-SB DIRT TOOTHCaterpillar style SBIC standard dirt bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 14.10

1U3352P ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 13.85

1U3352PT ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 22.93



1U3352TL TIGER LONG TOOTHCaterpillar style tiger long bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 10.80

1U3352TL-SB TIGER LONG TOOTHCaterpillar style SBIC tiger long bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 14.29

1U3352V DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J350 series, takes a 9J2358 pin and an 8E6359 retainer 13.49

1U3352WTL TWIN TIGER LONG TOOTHCaterpillar style twin tiger long bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 16.47

1U3451 SHORT TOOTHCaterpillar style short dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer(or an 8E0468 pin and an 8E8469 sleeved retainer) 23.15

1U3452-SB DIRT TOOTHCaterpillar style SBIC standard dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 25.30

1U3452FL FLARE TOOTHCaterpillar style flare bucket tooth for a J450 series; takes an 8E 0468 pin and an 8E8469 sleeved retainer; Use Item #8J1450 37.04

1U3452RC ROCK CHISEL TOOTHCaterpillar style rock chisel bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 32.70

1U3452RC-SB ROCK CHISEL TOOTHCaterpillar style SBIC rock chisel bucket tooth for a J450 series, takes a 1U1458 pin and an 8E6359 sleeved retainer 33.51

1U3452SYL SYL TOOTHCaterpillar style SYL bucket tooth for a J450 series; takes a 1U1458 pins and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer; Use Item # 9W8452SYL 33.52

1U3452TL TIGER TOOTHCaterpillar style tiger long bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 28.22

1U3452TL-SB TIGER TOOTHCaterpillar style SBIC tiger long bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 28.39

1U3452WT TWIN TIGER TOOTHCaterpillar style twin tiger short bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 24.50

1U3452WTL TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 29.32


1U3552 DIRT TOOTHCaterpillar style dirt bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item #9W8552 39.15

1U3552-SB DIRT TOOTHCaterpillar style dirt bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item #9W8552 39.15

1U3552RC ROCK CHISEL TOOTHCaterpillar style rock chisel bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 50.53

1U3552SYL SYL TOOTHCaterpillar style SYL bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 9W8552SYL 52.80

1U3552TL TIGER TOOTHCaterpillar style tiger long bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 36.82

1U3552WTL TWIN TIGER TOOTHCaterpillar style twin tiger long bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 40.56

208-5254 FLARE TOOTHCaterpillar style flare bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer; Use Item # 3G8250 7.50

222-7553 TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J350 series, takes a 9J2358 pin and an 8E6359 sleeved retainer. 16.47

222-7603 TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J600 series, takes a 6I6608 pin and a 6I6609 sleeved retainer; Use Item # 6I6602WTL 80.47

2C6509 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 4T2479 or a 6Y3394 pin and an 8E4743 sleeved retainer; Use Item # 9W2451 33.07

2D5572 SCARIFIER TOOTH Caterpillar style scarifier bucket tooth 3.30

3G4451 SHORT TOOTHCaterpillar style short dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer); Use Item # 1U3451 23.15

3G4452 DIRT TOOTHCaterpillar style dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer); Use Item #9W8452 24.85

3G5452 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 6Y3394 pin and an 8E5559 sleeved retainer; Use Item # 4T5452 40.79

3G6502 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer; Use Item # 4T5502 61.07

3G6503CL RIPPER TOOTH Caterpillar style ripper bucket tooth for a J500 series, takes a 3G0500 pin 66.14

3G8250 FLARE TOOTHCaterpillar style flare bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 7.50

3G8250-SB FLARE TOOTHCaterpillar style SBIC flare bucket tooth for a J250 series, takes a 9J2258 pin and an 8E6259 sleeved retainer 7.50

4K0034 DIRT TOOTH Caterpillar style standard dirt bucket tooth, takes a 4K0043 pin and a 4K0041 retainer 4.184K6936 DIRT TOOTH Caterpillar style standard dirt bucket tooth, takes a 4K0043 pin and a 4K0041 retainer 3.08

4T1300 FLARE TOOTHCaterpillar style flare bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item #4T1300 11.46

4T1300 FLARE TOOTHCaterpillar style flare bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 11.46

4T1553 HD TOOTHCaterpillar style heavy duty bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item #9N4552 54.45

4T2203 DIRT TOOTHCaterpillar style dirt bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer 3.30

4T2253 ABRASION TOOTHCaterpillar style abrasion bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 7.27

4T2253PT ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 12.56


4T2303PT ROCK PENETRATOR TOOTHCaterpillar style rock penetration bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 16.31

4T2303RP2 ROCK PENETRATOR TOOTHCaterpillar style rock penetration bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 18.95


4T2353PT ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 21.61

4T2353RP2 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 27.12

4T2353RPHD HD ROCK PENETRATOR TOOTHCaterpillar style heavy duty, rock penetrator bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 27.30

4T4302 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 6Y0309 11.91

4T4352 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer; Use Item # 6Y0352 23.81

4T4451 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 6Y3394 pin and an 8E5559 sleeved retainer 36.55


4T4502 RIPPER TOOTH Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer 67.904T4503 RIPPER TOOTH Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer 67.904T4702 DIRT TOOTH Caterpillar style bucket tooth for a J700 series, takes a 9U9616 pin and a 4T4707 retainer 103.62

4T4702PT ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J700 series; takes a 9U9616 pin and a 4T4707 retainer 147.49

4T4703 ABRASION TOOTHCaterpillar style abrasion bucket tooth for a J700 series; takes a 9U9616 pin and a 4T4707 retainer 106.92

4T4709 PENETRATOR TOOTHCaterpillar style penetrator bucket tooth for a J700 series; takes a 4T4708 pin and a 4T4707 retainer 83.78


4T5501 RIPPER TOOTH Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer 63.93

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)4T5502 RIPPER TOOTH Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer 61.074T5503 RIPPER TOOTH Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer 63.93

4T9107 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 6Y0309 11.91

60359 RIPPER TOOTHCaterpillar style ripper bucket tooth for a J350 series, takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item #6Y0359 27.34

6603RP ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J600 series, takes a 6I6608 pin and a 6I6609 sleeved retainer 102.95

6E5232 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98

6I6602 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 70.32

6I6602RC ROCK CHISEL TOOTHCaterpillar style rock chisel bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 85.32

6I6602SYL SYL TOOTHCaterpillar style SYL bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 79.81

6I6602TL TIGER TOOTHCaterpillar style tiger bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 72.31

6I6602WTL TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 80.47

6I6603 HEAVY DUTY TOOTHCaterpillar style standard heavy duty abrasion bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 123.02

6I6603PTROCK PENETRATIONTOOTH

Caterpillar style heavy duty, rock penetrator bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 109.56

6I6603RP2HEAVY DUTY ROCKPENETRATOR TOOTH

Caterpillar style heavy duty, rock penetrator bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer; Use Item # 6I6603RPHD 103.62

6I6603RPHDHEAVY DUTY ROCKPENETRATOR TOOTH

Caterpillar style heavy duty, rock penetrator bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 103.62

6I8803 HD ABRASION TOOTHCaterpillar style HD Abrasion bucket tooth for a J800 series, takes a 102-0101 pin and a 101-2874 sleeved retainer 220.46

6I8803PT ROCK PENETRATOR TOOTHCaterpillar style Rock Penetrator bucket tooth for a J800 series, takes a 102-0101 pin and a 101-2874 sleeved retainer 221.56

6J2641 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 4T2479 or a 6Y3394 pin and an 8E4743 sleeved retainer; Use Item # 9W2451 33.07



6J8813 RIPPER TOOTHCaterpillar style heavy duty, ripper bucket tooth for a R450 series; takes a 4T2479 or a 6Y3394 pin and an 8E4743 sleeved retainer; Use Item # 9W2452 39.68

6J8815 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 6Y3394 pin and an 8E5559 sleeved retainer; Use Item # 4T4453 43.21

6Y0309 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 11.91

6Y0352 RIPPER TOOTH Caterpillar style ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer 23.816Y0359 RIPPER TOOTH Caterpillar style ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer 27.34

6Y2253 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 23.16

6Y2553 ABRASION TOOTHCaterpillar style abrasion bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 66.13

6Y3221 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J225 series; takes a 6Y3228 pin and a 3G9609 retainer; Use Item #6Y3222 3.97

6Y3222 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J225 series; takes a 6Y3228 pin and a 3G9609 retainer 3.97

6Y3222-SB DIRT TOOTHCaterpillar style SBIC standard dirt bucket tooth for a J225 series, takes a 6Y3228 pin and a 3G9609 retainer 4.50

6Y3222T TIGER TOOTH Caterpillar style tiger bucket tooth for a J225 series; takes a 6Y3228 pin and a 3G9609 retainer 4.85

6Y3222T-SB TIGER TOOTHCaterpillar style SBIC tiger bucket tooth for a J225 series, takes a 6Y3228 pin and a 3G9609 retainer 4.60

6Y3222WT TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J225 series; takes a 6Y3228 pin and a 3G9609 retainer 5.62

6Y3222WT-SB TWIN TIGER TOOTHCaterpillar style SBIC twin tiger bucket tooth for a J225 series, takes a 6Y3228 pin and a 3G9609 retainer 5.30

6Y3552 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R550 series; takes an 8E2229 pin and an 8E2230 retainer 113.10

6Y3553 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R550 series; takes an 8E2229 pin and an 8E2230 retainer 112.95

6Y5230HD SCARIFIER TOOTH Caterpillar style heavy duty, scarifier bucket tooth 3.31

6Y5409T TIGER TOOTHCaterpillar style tiger bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 retainer; Use Item #7T3402TL 20.59

6Y6335 UNITOOTHCaterpillar style unitooth for a J200 series, takes 2 - 625x250 plow bolts and 2 - 625 hex nuts; Use Item #135-8203 6.00

6Y7229 TIGER TOOTHCaterpillar style tiger bucket tooth for a J225 series, takes a 6Y3228 pin and a 3G9609 retainer; Use Item # 6Y3222T 4.85

6Y7409 ROCK PENETRATOR TOOTHCaterpillar style rock penetration bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 retainer 19.40

77-2832 DIRT TOOTH H&L style dirt bucket tooth for a 240 series; takes a 24FP flex pin; Use Item #24F 3.09

7I7609 ROCK PENETRATOR TOOTHCaterpillar style rock penetration bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 64.81

7J3312 RIPPER TOOTHCaterpillar style ripper bucket tooth; takes a 4T2479 pin or a 6Y3394 pin and an 8E4743 sleeved retainer 30.57



7J6844 RIPPER TOOTHCaterpillar style ripper bucket tooth; takes a 9J2358 pin and a 1U2405 retainer; Use Item #6Y0359 27.34

7J7500 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 6Y0309 11.91


7J9413 RIPPER TOOTHCaterpillar style heavy duty, ripper bucket tooth for a R450 series; takes a 4T2479 or a P385 pin; Use Item # 9W2452 39.68

7J9415 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 6Y3394 pin and an 8E5559 sleeved retainer; Use Item # 4T4453 43.21

7J9550 FLARE TOOTHCaterpillar styled flare bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 55.34

7J9551 SHORT TOOTHCaterpillar style short dirt bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 9W8551 35.27

7J9552 DIRT TOOTHCaterpillar style dirt bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item #9W8552 39.15

7T3400 FLARE TOOTHCaterpillar style flare bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer; Use Item #7T3402F 26.45

7T3402 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 21.61

7T3402-SB DIRT TOOTHCaterpillar style SBIC standard dirt bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 20.53

7T3402F FLARE TOOTHCaterpillar style flare bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 26.45

7T3402PT ROCK PENETRATOR TOOTHCaterpillar style rock penetration bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 35.05

7T3402RC ROCK CHISEL TOOTHCaterpillar style rock chisel bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 24.25

7T3402RP2 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J400 series, takes a 7T3408 pin and an 8E8409 retainer 25.15

7T3402SYL SYL TOOTHCaterpillar style SYL bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 31.53

7T3402TL TIGER TOOTHCaterpillar style tiger bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 20.59

7T3402TL-SB TIGER TOOTHCaterpillar style SBIC tiger bucket tooth for a J400 series, takes a 7T3408 pin and an 8E8409 retainer 21.90

7T3402WTL TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 25.13

7T3403 ABRASION TOOTHCaterpillar style abrasion bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 28.65

7T3403RPHD HD ROCK PENETRATOR TOOTHCaterpillar style heavy duty, rock penetration bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 35.27

7T8202 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item # 1U3202 3.09

7T8459 TIGER TOOTHCaterpillar style tiger bucket tooth for a J450 series; takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item #1U3452TL 28.22

7T9173 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 6Y3394 pin and an 8E5559 sleeved retainer; Use Item # 4T4451 36.55

7Y0602 HD TOOTHCaterpillar style heavy duty bucket tooth for a J600 series; takes a 6I6608 pin and a 6I6609 sleeved retainer 87.74

8E1239 TIGER TOOTH H&L style heavy duty, tiger bucket tooth for a 230 series; takes a 23FP flex pin; Use Item #230T 2.51

8E4402 HD TOOTHCaterpillar style heavy duty bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 25.90

8E4402SYL SYL TOOTHCaterpillar style SYL bucket tooth for a J400 series; takes a 7T3408 pin and an 8E8409 sleeved retainer 29.70

8E5771 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 6Y3394 pin and an 8E5559 sleeved retainer; Use Item # 4T5452 40.79

8E8503 RIPPER TOOTH Caterpillar style ripper bucket tooth for a R500 series, takes a 6Y3909 pin and a 4T4707 retainer 70.32

8J1450 FLARE TOOTHCaterpillar style flare bucket tooth for a J450 series; takes an 8E0468 pin and an 8E8469 sleeved retainer 37.04

8J1450F-SB FLARE TOOTHCaterpillar style SBIC flare bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 31.69

8J1451 SHORT TOOTHCaterpillar style short dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer); Use Item # 1U3451 23.15

8J1452 DIRT TOOTHCaterpillar style dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer); Use Item #9W8452 24.85


8J2220 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer; Use Item # 6Y0359 27.34

8J3350 FLARE TOOTHCaterpillar style flare bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item #8J3350 17.64

8J3350 FLARE TOOTHCaterpillar style flare bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 17.64

8J3350F-SB FLARE TOOTHCaterpillar style SBIC flare bucket tooth for a J350 series; takes an 8E2358 pin and an 8E6359 sleeved retainer 17.39

8J3351 SHORT TOOTHCaterpillar style short, dirt bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # 1U3351 13.12

8J3352 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # 1U3352 13.16




8J4955 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J350 series, takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # 1U3352 13.16


8J5302 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 1U3302 9.04

8J6201 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item # 1U3202 3.09

8J6202 SHORT TOOTHCaterpillar style short bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item # 1U3201 2.65

9J3167 Dirt ToothCaterpillar style standard dirt bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 1U3302 9.04


9J4203 DIRT TOOTHCaterpillar style dirt bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item # 4T2203 3.30



9J4253 ABRASION TOOTHCaterpillar style abrasion bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer; Use Item # 4T2253 7.27

9J4259 ROCK PENETRATOR TOOTHCaterpillar style rock penetration bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 5.73


9J4302 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # 1U3302 9.04



9J4309-SB ROCK PENETRATOR TOOTHCaterpillar style SBIC rock penetrator bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 8.70





9J4453 HD TOOTHCaterpillar style heavy duty bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer); Use Item # 9N4452 35.01

9J4459 ROCK PENETRATOR TOOTHCaterpillar style rock penetration bucket tooth for a J450 series, takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item # 9W8459 21.83



9J4553 HD TOOTHCaterpillar style heavy duty bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 9N4552 54.45

9J4559 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J550 series, takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 9W8559 31.31

9J5559 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 9W8559 31.31

9J8910 TIGER TOOTH Caterpillar style tiger bucket tooth for a R300 series; takes a 9J6583 pin and a 6Y9459 retainer 12.56


9J8920 RIPPER TOOTHCaterpillar style ripper bucket tooth; takes a 9J2358 pin and a 1U2405 retainer; Use Item #6Y0359 27.34

9N4252 HD TOOTHCaterpillar style heavy duty bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 8.37

9N4253 DIRT TOOTHCaterpillar style dirt bucket tooth for a J250 series; takes a 9J2258 pin and an 8E6259 sleeved retainer 10.14


9N4303 ABRASION TOOTHCaterpillar style abrasion bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer 16.54


9N4352-SB HD TOOTHCaterpillar style SBIC heavy duty bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 17.19

9N4353 ABRASION TOOTHCaterpillar style abrasion bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer 24.25

9N4452 HD TOOTHCaterpillar style heavy duty bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 35.01

9N4453 ABRASION TOOTHCaterpillar style abrasion bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 48.72


9N4552 HD TOOTHCaterpillar style heavy duty bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 54.45

9W1453RP2 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 50.71

9W1453RP3 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 50.58

9W1453RPHD HD ROCK PENETRATOR TOOTHCaterpillar style heavy duty, rock penetrator bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 44.75

9W1552RP2 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item #9W8552PT 62.16

9W1553 HEAVY DUTY TOOTHCaterpillar style heavy duty bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 9N4552 54.45

9W1553RP2 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 63.49

9W1553RP2 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item #9W8552PT 63.49

9W1553RP3 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 69.00

9W1553RPHD HD ROCK PENETRATOR TOOTHCaterpillar style heavy duty, rock penetrator bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 68.34

9W1879 UNITOOTH Caterpillar style unitooth, takes 2 - 625x250 plow bolts and 2 - 625 hex nuts; Use Item #135-8203 6.00

9W2359 TIGER TOOTHCaterpillar style tiger long bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item #1U3352TL 10.80

9W2451 RIPPER TOOTHCaterpillar style ripper bucket tooth for a R450 series; takes a 4T2479 or a 6Y3394 pin and an 8E4743 sleeved retainer 33.07

9W2452 RIPPER TOOTH Caterpillar style heavy duty, ripper bucket tooth for a R450 series; takes a 4T2479 or a P385 pin 39.68

9W4551 RIPPER TOOTHCaterpillar style ripper bucket tooth for a J550 series; takes an 8E2229 pin and an 8E2230 retainer 116.25

9W4552 RIPPER TOOTHCaterpillar style ripper bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 116.25

9W5659 RIPPER TOOTHCaterpillar style heavy duty, ripper bucket tooth for a R450 series; takes a 4T2479 or a P385 pin; Use Item # 9W2452 39.68

9W6559 TIGER TOOTHCaterpillar style tiger long bucket tooth for a J550 series, takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 1U3552TL 36.82

9W8209 TIGER TOOTHCaterpillar style tiger bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item #1U3202T 3.29

9W8259 TIGER TOOTHCaterpillar style tiger bucket tooth for a J250 series, takes a 9J2258 pin and an 8E6259 sleeved retainer; Use Item # 1U3252TL 6.42

9W8309 TIGER TOOTHCaterpillar style tiger long bucket tooth for a J300 series; takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item #1U3302TL 9.92

9W8359 TIGER TOOTHCaterpillar style tiger long bucket tooth for a J350 series, takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # 1U3352TL 10.80

9W8451 SHORT TOOTHCaterpillar style short dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 23.15

9W8452 DIRT TOOTHCaterpillar style dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer); Use Item #9W8452 24.85

9W8452 DIRT TOOTHCaterpillar style dirt bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 24.85

9W8452PT ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 43.65

9W8452RC ROCK CHISEL TOOTHCaterpillar style rock chisel bucket tooth for a J450 series, takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item # 1U3452RC 31.53

9W8452SYL SYL TOOTHCaterpillar style SYL bucket tooth for a J450 series; takes a 1U1458 pins and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 33.52

9W8452TL TIGER TOOTHCaterpillar style tiger long bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer; Use Item # 1U3452TL 28.22

9W8452V SYL TOOTHCaterpillar style SYL version bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 24.20

9W8452WTL TWIN TIGER TOOTHCaterpillar style twin tiger bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer); Use Item # 1U3452WTL 29.32

9W8459 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 21.83

9W8459-SB ROCK PENETRATOR TOOTHCaterpillar style SBIC rock penetrator bucket tooth for a J450 series, takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer) 21.60

9W8551 SHORT TOOTHCaterpillar style short dirt bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 35.27

9W8552 DIRT TOOTHCaterpillar style dirt bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 39.15

9W8552-SB DIRT TOOTHCaterpillar style SBIC dirt bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 40.06

9W8552PT HD PENETRATOR TOOTHCaterpillar style heavy duty, penetrator bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 62.16

9W8552RC ROCK CHISEL TOOTHCaterpillar style rock chisel bucket tooth for a J550 series; takes a 1U1558 and an 8E5559 sleeved retainer; Use Item #1U3552RC 50.53

9W8552SYL SYL TOOTHCaterpillar style SYL bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 52.80

9W8552TL TIGER TOOTHCaterpillar style tiger long bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 1U3552TL 36.82

9W8552V SYL TOOTHCaterpillar style SYL version bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 7.20


9W8552WTL TWIN TIGER TOOTHCaterpillar style twin tiger long bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 1U3552WTL 40.56

9W8559 ROCK PENETRATOR TOOTHCaterpillar style rock penetrator bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer 31.31

9W9879 DIRT TOOTHEsco style standard dirt bucket tooth, conical style for a 30 series; takes a 25-30LK lock and a 25-30PN pin; Use Item #30S 5.95

9W9880 DIRT TOOTHEsco style standard dirt bucket tooth, conical style for a 35 series; takes a 35PN pin and a 35-40LK lock; Use Item #35S 9.26

9W9881 DIRT TOOTHEsco style standard dirt bucket tooth, conical style for a 40 series; takes a 40PN pin and a 35-40LK lock; Use Item #40S 15.65

9W9882 DIRT TOOTHEsco style standard dirt bucket tooth for a 45 series; takes a 45PN pin and a 45LK lock; Use Item #45S 20.50

9W9883 TIGER TOOTHEsco style tiger bucket tooth, conical style for a 30 series; takes a 27LK horseshoe lock or a 27VPL plug and a 27VPN pin; Use Item #30VIP 6.17

9W9884 TIGER TOOTHEsco style tiger bucket tooth, conical style for a 35 series; takes a 35PN pin and a 35-40LK lock; Use Item #35VIP 7.94

9W9885 TIGER TOOTHEsco style tiger bucket tooth, conical style for a 40 series; takes a 40PN pin and a 35-40LK lock; Use Item #40VIP 16.53

9W9886 TIGER TOOTHEsco style tiger bucket tooth, conical style for a 45 series; takes a 45PN pin and a 45LK lock; Use Item #45VIP 17.20

M20EEXTRA HEAVY DUTYDIRT TOOTH

Caterpillar style extra heavy duty dirt tooth for a J200 series bucket tooth takes a 9W7112 pin and an 8E6209 sleeved retainer


Caterpillar style extra heavy duty dirt tooth for a J300 series bucket tooth takes a 9J2308 pin and an 8E6259 sleeved retainer

M30S DIRT TOOTHCaterpillar style dirt tooth for a J300 series bucket tooth takes a 9J2308 pin and an 8E6259 sleeved retainer


Caterpillar style extra heavy duty dirt tooth for a J350 series bucket tooth takes a 9J2358 pin and an 8E6359 sleeved retainer

M35S DIRT TOOTHCaterpillar style dirt tooth for a J350 series bucket tooth takes a 9J2358 pin and an 8E6359 sleeved retainer


Caterpillar style extra heavy duty dirt tooth for a J400 series bucket tooth takes a 7T3408 pin and an 8E8409 sleeved retainer


Caterpillar style extra heavy duty dirt tooth for a J450 series bucket tooth takes a 8E0468 pin and an 8E8469 sleeved retainer

M45S DIRT TOOTHCaterpillar style dirt tooth for a J450 series bucket tooth takes a 8E0468 pin and an 8E8469 sleeved retainer


Caterpillar style extra heavy duty dirt tooth for a J550 series bucket tooth takes a 1U1558 pin and an 8E5559 sleeved retainer

M55W TWIN TIGER TOOTHCaterpillar style dirt bucket tooth for a J550 series bucket tooth takes a 1U1558 pin and an 8E5559 sleeved retainer

MC20EEXTRA HEAVY DUTYDIRT TOOTH

Caterpillar style extra heavy duty dirt tooth for a J200 series bucket tooth takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item # M20E

MC20W TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J200 series, takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item # RO20WTHD

MC23W TWIN TIGER TOOTH Caterpillar style twin tiger tooth for a 230 series, takes a 23FP flex pin; Use Item # RO23WTHD

MC25W TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J250 series, takes a 9J2258 pin and an 8E6259 sleeved retainer; Use Item # RO25WTHD


Caterpillar style extra heavy duty dirt tooth for a J300 series bucket tooth takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # MC30E

MC30S DIRT TOOTHCaterpillar style dirt tooth for a J300 series bucket tooth takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item # M30S



Caterpillar style extra heavy duty dirt tooth for a J350 series bucket tooth takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # M35E

MC35S DIRT TOOTHCaterpillar style dirt tooth for a J350 series bucket tooth takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # M35S



Caterpillar style extra heavy duty dirt tooth for a J400 series bucket tooth takes a 7T3408 pin and an 8E8409 sleeved retainer; Use Item # M40E

MC40W TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J400 series, takes a 7T3408 pin and an 8E8409 sleeved retainer; Use Item # RO40WTHD


Caterpillar style extra heavy duty dirt tooth for a J450 series bucket tooth takes a 8E0468 pin and an 8E8469 sleeved retainer; Use Item # M45E

MC45S DIRT TOOTHCaterpillar style dirt tooth for a J450 series bucket tooth takes a 8E0468 pin and an 8E8469 sleeved retainer; Use Item # M45S

MC45W TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J450 series, takes a 8E0468 pin and an 8E8469 sleeved retainer; Use Item # RO45WTHD


Caterpillar style extra heavy duty dirt tooth for a J550 series bucket tooth takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # M55E

MC55W TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J550 series, takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # RO55WTHD

MC60W TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J600 series, takes a 6I6608 pin and an 6I6609 sleeved retainer; Use Item # RO60WTHD

RO20WTHD TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J200 series, takes a 9W7112 pin and an 8E6209 sleeved retainer

RO23WTHD TWIN TIGER TOOTH Caterpillar style twin tiger tooth for a 230 series, takes a 23FP flex pin

RO25WTHD TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J250 series, takes a 9J2258 pin and an 8E6259 sleeved retainer




RO40WTHD TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J400 series, takes a 7T3408 pin and an 8E8409 sleeved retainer

RO45WTHD TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J450 series, takes a 8E0468 pin and an 8E8469 sleeved retainer

RO55WTHD TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J550 series, takes a 1U1558 pin and an 8E5559 sleeved retainer

RO60WTHD TWIN TIGER TOOTHCaterpillar style twin tiger tooth for a J600 series, takes a 6I6608 pin and an 6I6609 sleeved retainer

T107-3350 FLARE TOOTHCaterpillar style flare bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # 8J3350 17.64

T6Y0352 TIGER TOOTHJohn Deere style tiger ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer 24.18

T9J8910 RIPPER TOOTHJohn Deere style tiger ripper bucket tooth for a R300 series; takes a 9J6583 pin and a 6Y9459 retainer 12.56

Caterpillar Style Top Plates1U0593TP CENTER TOP PLATE Caterpillar style center top plate 60.00100-6668TP CENTER TOP PLATE Caterpillar style Center Top Plate 62.00217-4726TPL LH TOP PLATE Caterpillar style LH top plate 18.00217-4726TPR RH TOP PLATE Caterpillar style RH top plate 18.00217-4727TP CENTER TOP PLATE Caterpillar style center top plate 93.003G6395TPL LH TOP PLATE Caterpillar style LH top plate 13.003G6395TPR RH TOP PLATE Caterpillar style RH top plate 13.00

908-8 TRASH CLEAT Caterpillar style compactor trash cleat that is 7 1/4" in height 35.20Caterpillar Style Washers, Retainers & Locks1078559 WASHER Caterpillar style retainer for J550 series bucket tooth, takes a 1U1558 pin; Use Item #3G9559 0.44

1140359 WASHERCaterpillar style sleeved retainer for a J350 series bucket tooth, takes a 9J2358 pin; Use Item #8E6359 0.10

1143469 WASHER Caterpillar style retainer for a J460 series, takes an 8E0468 pin; Use Item #8E8469 0.101167409 WASHER Caterpillar style retainer for a J400 series bucket tooth, takes a 7T3408 pin; Use Item #7T3409 0.101495733 WASHER Caterpillar style washer for J250 and J300 series bucket teeth; Use Item # 8E6259 0.03101-2874 RETAINER Caterpillar style retainer for a J800 series bucket tooth, takes a 102-0101 pin 0.50

107-3469 WASHERCaterpillar style sleeved retainer for a J460 series bucket tooth, takes an 8E0468 pin; Use Item #8E8469 0.10

113-4709 WASHER Caterpillar style washer for a J700 series bucket tooth, takes a 9U9616 pin; Use Item # 4T4707 0.40

113-9609 WASHERCaterpillar style sleeved retainer for a J600 series bucket tooth, takes a 6I6608 pin; Use Item # 6I6609 0.31

114-0359 WASHERCaterpillar style sleeved retainer for a J350 series bucket tooth, takes a 9J2358 pin; Use Item #8E6359 0.10

116-0359 WASHERCaterpillar style sleeved retainer for a J350 series bucket tooth, takes a 9J2358 pin; Use Item # 8E6359 0.10

116-7409 WASHER Caterpillar style washer for a J400 series bucket tooth, takes a 7T3408; Use Item #8E8409 0.20125 HARD WASHER HARD WASHER Caterpillar style 1 1/4" hard washer for a plow bolt; Use Item #4K0684 0.13133-0699 WASHER Caterpillar style sleeved retainer for J250 and J300 series bucket teeth; Use Item # 8E6259 0.03

134-1809 RETAINERCaterpillar style retainer for a J800 series bucket tooth, takes a 102-0101 pin; Use Item # 101-2874 0.50

149-5733 RETAINER Caterpillar style retainer for a J225/J250 series, takes a 6Y3228 pin; Use Item # 3G9609 0.041U2405 RETAINER Caterpillar style retainer, takes a 9J2358 pin 0.103G9549 RETAINER Caterpillar style retainer for a J350 series 0.103G9559 WASHER Caterpillar style retainer for a J550 series, takes a 1U1558 pin 0.443G9609 WASHER Caterpillar style retainer for a J225/J250 series, takes a 6Y3228 pin 0.044K0008 LOCK Caterpillar style rubber lock, takes a 4K0043 pin 0.044K0041 LOCK Caterpillar style rubber lock, takes a 4K0043 pin 0.104K0684 HARD WASHER Caterpillar style hard washer for 125 plow bolt 0.134T0001 WASHER Caterpillar style washer 0.024T4707 WASHER Caterpillar style washer for a J700 series bucket tooth, takes a 9U9616 pin 0.405K1458 GROMMET Caterpillar style grommett for a 5K1459 pin 0.015P8250 WASHER Caterpillar style 1" hard washer for a plow bolt; Use Item #100 hard washer 0.025S0581 WASHER Caterpillar style washer 0.536I6609 WASHER Caterpillar style retainer for J600 series bucket tooth, takes a 6I6608 pin 0.316Y1202 WASHER Caterpillar style washer for a J700 series tooth, takes a 6Y1204 pin 0.406Y1205 WASHER Caterpillar style washer for a J700 series bucket tooth, takes an 8E2229 pin 0.406Y8559 WASHER Caterpillar style washer for a J550 series bucket tooth, takes a 1U1558 pin; Use Item # 8E5559 0.206Y9459 RETAINER Caterpillar style retainer with an out sleeve 0.107J6845 WASHER Caterpillar style retainer for a J550 series, takes a 1U1558 pin; Use Item # 3G9559 0.447J9559 WASHER Caterpillar style retainer for a J225/J250 series, takes a 6Y3228 pin; Use Item # 3G9609 0.047T3409 WASHER Caterpillar style retainer for a J400 series, takes a 7T3408 pin 0.108E0469 WASHER Caterpillar style washer for a J460 series bucket tooth, takes an 8E0468 pin 0.108E2230 WASHER Caterpillar style washer, takes an 8E2229 pin 0.408E4743 WASHER Caterpillar style retainer for a J550 series, takes a 1U1558 pin; Use Item #3G9559 0.448E5559 WASHER Caterpillar style washer for a J550 series bucket tooth, takes a 1U1558 pin 0.208E6209 WASHER Caterpillar style washer for a J200 series bucket tooth, takes a 9W7112 pin 0.028E6259 WASHER Caterpillar style washer for J250 and J300 series bucket teeth 0.038E6359 WASHER Caterpillar style washer for a J350 series bucket tooth, takes a 9J2358 pin 0.108E8409 WASHER Caterpillar style washer for a J400 series bucket tooth, takes a 7T3408 pin 0.208E8469 WASHER Caterpillar style washer for a J460 series bucket tooth, takes an 8E0468 pin 0.108J5309 WASHER Caterpillar style retainer for a J225/J250 series, takes a 6Y3228 pin; Use Item # 3G9609 0.04


937683 LOCKEsco style rubber lock for a 25 or 30 series bucket tooth, takes a 25-30PN Pin; Use Item #25-30LK 0.02

952654 LOCK Esco style lock for a 45 series, takes a 45PN pin; Use Item #45LK 0.11

955564 LOCKEsco style retainer for a 35 series or 40 series bucket tooth, takes a 35PN pin; Use Item #35-40LK 0.11

Caterpillar Style Wear Plates

195-7096 CENTER WEAR PLATECaterpillar style 4 bolt center wear plate for a loader; takes 4 - 125 x 500 plow bolts and 4 - 125 hex nuts 44.18

195-7097 RH WEAR PLATECaterpillar style 4 bolt right hand wear plate for a loader; takes 4 - 125 x 500 plow bolts and 4 - 125 hex nuts 49.61

195-7098 LH WEAR PLATECaterpillar style 4 bolt left hand wear plate for a loader; takes 4 - 125 x 500 plow bolts and 4 - 125 hex nuts 49.61

195-7180 CENTER WEAR PLATECaterpillar style 3 bolt center wear plate for a loader; takes 3 - 125 x 500 plow bolts and 3 - 125 hex nuts 25.10

195-7181 RH WEAR PLATECaterpillar style 3 bolt right hand wear plate for a loader; takes 3 - 125 x 500 plow bolts and 3 - 125 hex nuts 28.66

195-7182 LH WEAR PLATECaterpillar style 3 bolt left hand wear plate for a loader; takes 3 - 125 x 500 plow bolts and 3 - 125 hex nuts 28.66

Caterpillar Style Weld-On Noses

1U1254WN NOSE PIECECaterpillar style weld on nose for a J250 series bucket tooth, takes a 9J2258 pin and an 8E6259 sleeved retainer; Use Item # 9J4254WN 5.91

3G4454WN NOSE PIECECaterpillar style weld on nose for a J450 series bucket tooth, takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item # 8E6464WN 19.84

4T9776WN NOSE PIECE Caterpillar style weld on nose for a D8 or a D9 ripper shank 36.88

6Y3224WN NOSE PIECECaterpillar style weld on nose for a J225 series bucket tooth, takes a 6Y3228 pin and a 3G9609 retainer 4.72

8E6464WN NOSE PIECECaterpillar style weld on nose for a J450 series bucket tooth, takes an 8E0468 pin and an 8E8469 sleeved retainer 19.84

8E7350 NOSE PIECECaterpillar style weld on nose for a J350 series bucket tooth, takes a 9J2358 pin and an 8E6359 sleeved retainer 15.59

9J4254WN NOSE PIECECaterpillar style weld on nose for a J250 series bucket tooth, takes a 9J2258 pin and an 8E6259 sleeved retainer 5.91



9J4554WN NOSE PIECECaterpillar style weld on nose for a J550 series bucket tooth, takes a 1U1558 pin and an 8E5559 sleeved retainer 31.62

WN225 WELD ON NOSECaterpillar style weld on nose for a J225 series bucket tooth, takes a 6Y3228 pin and a 3G9609 retainer; Use Item #6Y3224WN 4.72

WN250 WELD ON NOSECaterpillar style weld on nose for a J250 series bucket tooth, takes a 9J2258 pin and an 8E6259 sleeved retainer; Use Item # 9J4254WN; Use Item #9J4254WN 5.91

WN300 WELD ON NOSECaterpillar style weld on nose for a J300 series bucket tooth, takes a 9J2308 pin and an 8E6259 sleeved retainer; Use Item #9J4304WN 9.02

WN350 WELD ON NOSECaterpillar style weld on nose for a J350 series bucket tooth, takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item #9J4354WN 11.82

WN450 WELD ON NOSECaterpillar style weld on nose for a J450 series bucket tooth, takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item # 8E6464WN 19.84

WN460 WELD ON NOSECaterpillar style weld on nose for a J450 series bucket tooth, takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item # 8E6464WN 19.84

WN550 WELD ON NOSECaterpillar style weld on nose for a J550 series bucket tooth, takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item #9J4554WN 31.62

Chocky BarsChocky Bars

CB100 CHOCKY BAR100mm or 3 15/16" wide by 240mm or 9 7/16" long chocky bar, 700 brunell high chromium white iron with a mild steel weldable backing plate 9.50



CB25 CHOCKY BAR25mm or 1" wide by 240mm or 9 7/16" long chocky bar, 700 brunell high chromium white iron with a mild steel weldable backing plate 1.98






Clark-Hancock Style PartsClark-Hancock Style Adapters

947592 WELD ON ADAPTERH&L style wrap around, weld on, short leg adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #834-23 3.04

2511475 WELD ON ADAPTERH&L style wrap around, weld on, short leg adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #2740W23 3.77

6518120 WELD ON ADAPTERH&L style wrap around, weld-on, skid steer adapter with a 1" lip for a 230 series bucket tooth; Use Item #2740AW23 3.53


6560375 WELD ON ADAPTERH&L style weld on adapter with a .63" to .88" lip thickness for a 2A bucket tooth; Use Item # 835-2A 1.50

Clark-Hancock Style Pins562660 FLEX PIN H&L style flex pin for a 23 series bucket tooth; Use Item #23FP 0.09562672 FLEX PIN H&L style flex pin for a 27 series bucket tooth; Use Item #27FP 0.20946836 FLEX PIN H&L style flex pin for a 270 series bucket tooth; Use Item # 27FP 0.201502964 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN 0.331502974 PIN Esco style pin for a 40 series tooth; Use Item #40PN 0.571504272 PIN Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.201508219 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item # 24FP 0.121545175 PIN Esco style pin for a 50 series bucket tooth, takes a 50LK lock; Use Item #50PN 0.791553700 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item # 23FP 0.091586890 FLEX PIN H&L style flex pin for a 250 series bucket tooth; Use Item # 25FP 0.201801808 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN 0.331801812 PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN 0.571801815 PIN Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.201801823 PIN Esco style pin for a 50 series bucket tooth, takes a 50LK lock; Use Item #50PN 0.791801830 PIN Esco style pin for a 55 series bucket tooth, takes a 55LK lock; Use Item #55PN 0.993150286 FLEX PIN H&L style flex pin for a 24 series bucket tooth; Use Item # 24FP 0.123677327 PIN Esco style pin for a 55 series bucket tooth, takes a 55LK lock; Use Item #55PN 0.99102161110 FLEX PIN H&L style flex pin for a 23 series bucket tooth; Use Item #23FP 0.09P-36258 PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN 0.57P-36291 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN 0.33UE-11701-C FLEX PIN H&L style flex pin for a 25 series bucket tooth; Use Item #25FP 0.20Clark-Hancock Style Retainers1502965 RUBBER LOCK Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK 0.111502973 RUBBER LOCK Esco style lock for a 35 and 40 series bucket tooth; Use Item #35-40LK 0.11

1504271 RUBBER LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item #25-30LK 0.02

1545176 RUBBER LOCK Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK 0.441801809 RUBBER LOCK Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK 0.111801811 RUBBER LOCK Esco style lock for a 35 and 40 series bucket tooth; Use Item #35-40LK 0.11


1801824 RUBBER LOCK Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK 0.441801831 RUBBER LOCK Esco style rubber lock for a 55 series bucket tooth, takes a 55PN pin; Use Item #55LK 0.503674444 RUBBER LOCK Esco style rubber lock for a 55 series bucket tooth, takes a 55PN pin; Use Item #55LK 0.50P-36259 RUBBER LOCK Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK 0.11P-36292 RUBBER LOCK Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK 0.11Clark-Hancock Style Teeth102161109 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98102900010 DIRT TOOTH H&L style cast, dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.341542261 DIRT TOOTH

Esco style standard dirt bucket tooth for a 30 series, takes a 25-30LK lock and a 25-30PN pin; Use Item #30S 5.95

1542262 ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40RDX 14.68

1542264 DIRT TOOTHEsco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40S 15.65

1542266 DIRT TOOTHEsco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45S 20.50

1545174 ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50R 23.15

1546378 DIRT TOOTH Esco style dirt bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50S 24.431550017 DIRT TOOTH H&L style cast dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.341550041 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item # 3CHXL 2.201563478 DIRT TOOTH Esco style dirt bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50S 24.431553699B DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.98




5209689 SCARIFIER TOOTH Caterpillar style scarifier bucket tooth; Use Item #2D5572 3.30562659 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98562663 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.19562667 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06562671 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.16562738 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240 4.196509290 CRIMP ON TOOTH H&L style crimp on bucket tooth, fits a 2898 weld on adapter; Use Item # 00SPS 0.516515121 FABRICATED TOOTH H&L style fabricated/scarifier/ripper crimp on bucket tooth; Use Item # 1 3/4F 1.206649385 CRIMP ON TOOTH H&L style crimp on bucket tooth, fits a 2898 weld on adapter; Use Item # 00SPS 0.516657328 TIGER TOOTH H&L style tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230T 2.516657329 TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230WT 3.616657330 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.98889237 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.20

P-36283 DIRT TOOTHEsco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40S 15.65

P-36290 DIRT TOOTHEsco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45S 20.50

UE-11701-B DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)Doosan Style PartsDoosan Style Adapters2713-9039 WELD ON ADAPTER Caterpillar style weld on adapter for a J550 series with a 2 1/2" lip thickness; Use Item # 1U1553 68.78Doosan Style Teeth

2713-1212 UNITOOTHDaewoo style unitooth with a .49" lip thickness and a 1.77" bolt hole spacing, center to center; takes 2 - 625x225 plow bolts and 2 - 625 hex nuts 3.30

2713-1217 DIRT TOOTHDaewoo style dirt bucket tooth for model #S220V, takes a 9J2358 pin and an 8E6359 sleeved retainer 13.00

2713-1219 DIRT TOOTH Daewoo style dirt bucket tooth for model #S280V and #S290V, takes a 9J2358 pin and an 16.31

2713-1272 DIRT TOOTHDaewoo style dirt bucket tooth for model #S130V, takes a 9J2358 pin and an 8E6359 sleeved retainer 8.40

2713-6043 DIRT TOOTH Daewoo style dirt bucket tooth, takes a P235 pin; Use Item # 2713-9038 16.54

2713-9038 DIRT TOOTHDaewoo style standard dirt bucket tooth for an S280 series, takes a P235 pin and a 3G9549 retainer 16.54

2713-9040 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J550 series, takes a 1U1558 pin and an 8E5559 sleeved retainer; Use Item # 9W8552 39.15

2713-9041 DIRT TOOTHDaewoo style standard dirt bucket tooth for an S220 series, takes a P235 pin and a 3G9549 retainer 13.45

Esco Style PartsEsco Style 5 Packs

18TL (5PK) 5 PACKS - DIRTEsco style 18TL 5 Pack, includes 5 - 18TL dirt bucket teeth, 5 - 18-20PN pins and 5 - 18-20LK rubber locks 12.70

18TVIP-18VIP (5PK) 5 PACKS - TWIN TIGER/TIGEREsco style 5 pack, 2 of 18TVIP twin tiger bucket teeth, 3 of 18VIP tiger bucket teeth, 5 - 18-20PN pins and 5 - 18-20LK rubber locks 12.17

22S (5PK) 5 PACKS - DIRTEsco style 22S 5 Pack, includes 5 - 22S dirt bucket teeth, 5 - 22PN pins and 5 - 22LK rubber locks 15.60

22TVIP-22VIP (5PK) 5 PACKS - TWIN TIGER/TIGEREsco style 5 pack, 2 of 22TVIP twin tiger bucket teeth, 3 of 22VIP tiger bucket teeth, 5 - 22PN pins and 5 - 22LK rubber locks 18.65

25S (5PK) 5 PACKS - DIRTEsco style 25S 5 Pack, includes 5 - 25S dirt bucket teeth, 5 - 25-30PN pins and 5 - 25-30LK rubber locks 26.45


27SYL (5PK) 5 PACKS - DIRT Esco style 27SYL 5 Pack, includes 5 - 27SYL dirt bucket teeth and 5 - 27LK horseshoe locks 48.30

27TVIP-27VIP (5PK) 5 PACKS - TWIN TIGER/TIGEREsco style 5 pack, 2 of 27TVIP twin tiger bucket teeth, 3 of 27VIP tiger bucket teeth and 5 - 27LK horseshoe locks 45.99

30S (5PK) 5 PACKS - DIRTEsco style 30S 5 Pack, includes 5 - 30S dirt bucket teeth, 5 - 25-30PN pins and 5 - 25-30LK rubber locks 30.85


35TVIP-35VIP (5PK) 5 PACKS - TWIN TIGER/TIGEREsco style 5 pack, 2 of 35TVIP twin tiger bucket teeth, 3 of 35VIP tiger bucket teeth, 5 - 35PN pins and 5 - 35-40LK rubber locks 51.07

37SYL (5PK) 5 PACKS - DIRT Esco style 37SYL 5 Pack, includes 5 - 37SYL dirt bucket teeth and 5 - 37LK horseshoe locks 82.85

37TVIP-37VIP (5PK) 5 PACKS - TWIN TIGER/TIGEREsco style 5 pack, 2 of 37TVIP twin tiger bucket teeth, 3 of 37VIP tiger bucket teeth and 5 - 37LK horsehoe locks 79.13

40TVIP-40VIP (5PK) 5 PACKS - TWIN TIGER/TIGEREsco style 5 pack, 2 of 40TVIP twin tiger bucket teeth, 3 of 40VIP tiger bucket teeth, 5 - 40PN pins and 5 - 35-40LK rubber locks 77.89

V13SYL (5PK) 5 PACKS - DIRT Esco style V13SYL 5 Pack, includes 5 - V13SYL dirt bucket teeth and 5 - V13-17PN flex pins 9.70

V13TVY-V13VY (5PK) 5 PACKS - TWIN TIGER/TIGEREsco style Super V 5 pack, 2 of V13TVY twin tiger bucket teeth, 3 of V13VY tiger bucket teeth and 5 of V13-17PN flex pins 9.76

V17SYL (5PK) 5 PACKS - DIRT Esco style V17SYL 5 Pack, includes 5 - V17SYL dirt bucket teeth and 5 - V13-17PN flex pins 15.90

V17TVY-V17VY(5PK) 5 PACKS - TWIN TIGER/TIGEREsco style Super V 5 pack, 2 of V17TVY twin tiger bucket teeth, 3 of V17VY tiger bucket teeth and 5 of V13-17PN flex pins 12.35

V19SYL (5PK) 5 PACKS - DIRT Esco style V19SYL 5 Pack, includes 5 - V19SYL dirt bucket teeth and 5 - V23PN flex pins 25.85

V19TVY-V19VY (5PK) 5 PACKS - TWIN TIGER/TIGEREsco style Super V 5 pack, 2 of V19TVY twin tiger bucket teeth, 3 of V19VY tiger bucket teeth and 5 of V23PN flex pins 25.46









Esco Style Adapters157B-35 WELD ON ADAPTER Esco style weld-on adapter for a 35 series bucket tooth with a 1 1/2" lip thickness 21.611617-18 WELD ON ADAPTER Esco style weld-on adapter for an 18 series bucket tooth with a 3/4" lip thickness 4.981856-V61 ADAPTER Esco style Super V Adapter for a V61 series bucket tooth, takes a V61PN 125.001899-35 WELD ON ADAPTER Esco style weld-on adapter for a 35 series bucket tooth with a 1 1/2" lip thickness 22.711899-40 WELD ON ADAPTER Esco style weld-on adapter for a 40 series bucket tooth with a 1 1/2" lip thickness 31.6823574-22 WELD ON ADAPTER Esco style weld on adapter with a .9" lip thickness for a 22 series bucket tooth 7.502810-45 WELD ON ADAPTER Esco style weld-on adapter for a 45 series bucket tooth with a 2" lip thickness 39.603808-30 WELD ON ADAPTER Esco style weld-on adapter for a 30 series bucket tooth with a 1 1/4" lip thickness 17.483820-55 WELD ON ADAPTER Esco style weld on, SBIC adapter 73.603829A-V29 ADAPTER Esco style Super V Adapter for a V29 series bucket tooth, takes a V29PN 20.194838-V33 FM ADAPTER Esco style Super V Adapter for a V33 series bucket tooth, takes a V33PN 26.00

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)5750-V39 ADAPTER Esco style Super V Adapter for a V39 series bucket tooth, takes a V39PN 40.00

5849-V23 WELD ON ADAPTEREsco style Super V weld on adapter with a 1 1/4" lip thickness for a 23 series bucket tooth, takes a V23PN flex pin 13.00

5849-V29 WELD ON ADAPTER Esco style weld on adapter for a Super V 29 series 17.64


5854-V19 WELD ON ADAPTEREsco style Super V weld on adapter with a 1" lip thickness for a 19 series bucket tooth, takes a V23PN flex pin 9.00





5857A-V51 WELD ON ADAPTEREsco style Super V weld on adapter with a 2 1/2" lip thickness for a 51 series bucket tooth, takes a V51PN flex pin 61.00

5857A-V59 WELD ON ADAPTER Esco style weld on adapter for a Super V 59 series 79.375869A-V59 WELD ON ADAPTER Esco style weld on adapter for a Super V 59 series 92.595870A-V61 WELD ON ADAPTER Esco style weld on adapter for a Super V 61 series 110.235898-V61 WELD ON ADAPTER Esco style weld on adapter for a Super V 61 series 123.46802A-V29 ADAPTER Esco style Super V Adapter for a V29 series bucket tooth, takes a V29PN 17.59

833-18 WELD ON ADAPTEREsco style weld on adapter for an 18 series bucket tooth, takes an 18-20PN pin and an 18-20LK lock; this adapter can be used for a 3/4" to 1" lip thickness 3.53

833-V13 ADAPTER Esco style Super V Adapter for a V13 series bucket tooth, takes a V13-17PN 1.98

833-V17 WELD ON ADAPTEREsco style Super V weld on adapter with a .79" lip thickness for a 17 series bucket tooth, takes a V13-17PN flex pin 4.00

833-V19 WELD ON ADAPTER Esco style weld on adapter for a Super V 19 series 7.068534-47 WELD ON ADAPTER Esco style weld on adapter for a 47 series bucket tooth 64.87855-25 WELD ON ADAPTER Esco style weld on adapter for a 25 series bucket tooth with a 1 3/16" lip thickness 7.03855-25-SB ADAPTER Esco style SBIC adapter for a 25 series bucket tooth; for a 1 3/16" lip 7.15855-30 WELD ON ADAPTER Esco style weld on adapter for a 30 series bucket tooth with a 1 3/8" lip thickness 8.158802-V19 WELD ON ADAPTER Esco style weld on adapter for a Super V 19 series 9.048803-V23 WELD ON ADAPTER Esco style weld on adapter for a Super V 19 series 14.118806-V17 ADAPTER Esco style Super V Adapter for a V17 series bucket tooth, takes a V13-17PN 4.598830-V23 ADAPTER Esco style Super V Adapter for a V23 series bucket tooth, takes a V23PN 15.598841-V17 ADAPTER Esco style Super V Adapter for a V17 series bucket tooth, takes a V13-17PN 3.998842-V13 WELD ON ADAPTER Esco style weld on adapter for a Super V 13 series 3.09

8842-V17 WELD ON ADAPTEREsco style Super V weld on adapter with a 1" lip thickness for a 17 series bucket tooth, takes a V13-17PN flex pin 5.00

A56-40 WELD ON ADAPTER Esco style weld on adaper with a 1 5/8" lip thickness for a 40 series bucket tooth 29.32

T-2039-P3 WELD ON ADAPTERH&L style weld on excavator adapter with a .63" to .75" lip thickness for a 3C bucket tooth; Use Item #834-3C 2.68

T-2078-P2 WELD ON ADAPTERH&L style weld on, excavator adapter with a .63" to .88" lip thickness for a 2A bucket tooth; Use Item #835-2A 1.50

Esco Style Pins18-20PN PIN Esco style pin, takes an 18-20LK lock 0.0918PN PIN Esco style pin, takes an 18-20LK lock; Use Item # 18-20PN 0.0920PN PIN Esco style pin, takes an 18-20LK lock; Use Item # 18-20PN 0.0922PN PIN Esco style pin for a 22 series, takes a 22LK lock 0.2022RPG RIPPER PIN Esco style pin for a 22R10 ripper bucket tooth, takes a 22RBG bushing 0.5025-30PN PIN Esco style pin for a 25 & 30 series bucket tooth, takes a 25-30LK lock 0.2025-30PNR RATCHET PIN Esco style ratchet pin for a 25 and a 30 series bucket tooth, takes a 25-30LKR ratchet lock 0.2025PN PIN Esco style pin for a 25 & 30 series bucket tooth, takes a 25-30LK lock; Use Item # 25-30PN 0.20

25PNR RATCHET PINEsco style ratchet pin for a 25 and a 30 series bucket tooth, takes a 25-30LKR ratchet lock; Use Item # 25-30PNR 0.20

25RPG RIPPER PIN Esco style ripper pin for a 25R12 and a 25R11 ripper bucket tooth, takes a 25RBG bushing 0.1127VPN PIN Esco style pin for a 27 series bucket tooth, takes a 27VPL plug 0.4430PN PIN Esco style pin for a 25 & 30 series bucket tooth, takes a 25-30LK lock; Use Item # 25-30PN 0.20

30PNR RATCHET PINEsco style ratchet pin for a 25 and a 30 series bucket tooth, takes a 25-30LKR ratchet lock; Use Item # 25-30PNR 0.20

35PN PIN Esco style pin for a 35 series bucket tooth, takes a 35-40LK lock 0.2235PNR RATCHET PIN Esco style ratchet pin for a 35 series bucket tooth, takes a 35-40LKR ratchet lock 0.2235RPG RIPPER PIN Esco style pin for a 35R15-2A ripper bucket tooth, takes a 35RBG bushing 0.2037VPN PIN Esco style pin for a 37 series bucket tooth, takes a 37VPL plug 0.1540PN PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock 0.5740PNR RATCHET PIN Esco style ratchet pin for a 40 series bucket tooth, takes a 40LKR ratchet lock 0.2645PN PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock 0.3345PNR RATCHET PIN Esco style ratchet pin for a 45 series bucket tooth, takes a 45LKR ratchet lock 0.7047VPN PIN Esco style pin for a 47 series bucket tooth, takes a 47VPL plug 0.6650PN PIN Esco style pin for a 50 series bucket tooth, takes a 50LK lock 0.4450PNR RATCHET PIN Esco style ratchet pin for a 50 series bucket tooth, takes a 50LKR ratchet lock 0.8055PN PIN Esco style pin for a 55 series bucket tooth, takes a 55LK lock 0.9955PNR RATCHET PIN Esco style ratchet pin for a 55 series, takes a 55LKR ratchet lock 0.8056PNP PIN Esco style pin for a 56 series bucket tooth, takes a 56LK lock 1.7657VPN PIN Esco style pin for a 57 series bucket tooth, takes a 57VPL plug 0.5066PN PIN Esco style pin for a 66 series bucket tooth, takes a 66LK lock 0.9576PN PIN Esco style pin for a 76 series bucket tooth, takes a 76LK lock 0.9986PN PIN Esco style pin for an 86 series bucket tooth, takes an 86LK lock 2.62V13-17PN SUPER V FLEX PIN Esco style super V flex pin for a 13 or a 17 series bucket tooth 0.09V23PN SUPER V FLEX PIN Esco style Super V flex pin for a 19 or 23 series bucket tooth 0.10

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)V29PN SUPER V FLEX PIN Esco style Super V flex pin for a 29 series bucket tooth 0.27V33PN SUPER V FLEX PIN Esco style Super V flex pin for a 33 series bucket tooth 0.28V39PN SUPER V FLEX PIN Esco style Super V flex pin for a 39 series bucket tooth 0.39V43PN SUPER V FLEX PIN Esco style Super V flex pin for a 43 series bucket tooth 0.51V51PN SUPER V FLEX PIN Esco style Super V flex pin for a 51 series bucket tooth 0.94V59PN SUPER V FLEX PIN Esco style Super V flex pin for a 59 series bucket tooth 1.03V61PN SUPER V FLEX PIN Esco style Super V flex pin for a 61 series bucket tooth 0.50V69PN SUPER V FLEX PIN Esco style Super V flex pin for a 69 series bucket tooth 2.04V71PN SUPER V FLEX PIN Esco style Super V flex pin for a 71 series bucket tooth 2.20V81PN SUPER V FLEX PIN Esco style Super V flex pin for a 81 series bucket tooth 2.60Esco Style Retainers18-20LK LOCK Esco style rubber lock, takes an 18-20PN pin 0.0218LK LOCK Esco style rubber lock, takes an 18-20PN pin; Use Item # 18-20LK 0.0220LK LOCK Esco style rubber lock, takes an 18-20PN pin; Use Item # 18-20LK 0.0221LK LOCK Esco style horseshoe lock 21 series tooth 0.3322LK LOCK Esco style rubber lock for a 22 series, takes a 22PN pin 0.0522RBG BUSHING Esco style bushing for a 22R10 ripper tooth, takes a 22RPG pin 0.2525-30LK LOCK Esco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin 0.0225-30LKR RATCHET LOCK Esco style ratchet lock for a 25 and a 30 series tooth, takes a 25-30PNR ratchet pin 0.02

25LK LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item # 25-30LK 0.02

25LKR RATCHET LOCKEsco style ratchet lock for a 25 and a 30 series tooth, takes a 25-30PNR ratchet pin; Use Item # 25-30LKR 0.02

25RBG BUSHING Esco style bushing for 25R12 & 25R11, takes a 25RPG pin 0.2227LK LOCK Esco style horseshoe lock 27 series 0.4027LKS LOCK Esco style horseshoe lock 27 series; Use Item # 27LK 0.4027VPL PLUG Esco style Vplug for a 27 series tooth, takes a 27VPN pin 0.11

30LK LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item # 25-30LK 0.02

30LKR RATCHET LOCKEsco style ratchet lock for a 25 and a 30 series tooth, takes a 25-30PNR ratchet pin; Use Item # 25-30LKR 0.02

35-40LK LOCK Esco style lock for 35 & 40 series tooth, takes either a 35PN pin or a 40PN pin 0.1135-40LKR RATCHET LOCK Esco style ratchet lock for 35 & 40 series tooth, takes either a 35PNR or a 40PNR 0.1135LK LOCK Esco style lock for 35 & 40 series tooth; Use Item # 35-40LK 0.1135LKR RATCHET LOCK Esco style ratchet lock for 35 & 40 series tooth; Use Item # 35-40LKR 0.1135RBG BUSHING Esco style bushing for 35R15-2A ripper tooth, takes a 35RPG pin 0.0437LK LOCK Esco style horseshoe lock 37 series 0.7037LKS LOCK Esco style horseshoe lock 37 series; Use Item # 37LK 0.7037VPL PLUG Esco style retainer for a 37 series tooth, takes a 37VPN pin 0.1540LK LOCK Esco style lock for 35 & 40 series tooth; Use Item # 35-40LK 0.1140LKR RATCHET LOCK Esco style ratchet lock for 35 & 40 series tooth; Use Item # 35-40LKR 0.1145LK LOCK Esco style lock 45 series tooth, takes a 45PN pin 0.1145LKR RATCHET LOCK Esco style ratchet lock 45 series tooth, takes a 45PNR ratchet pin 0.1147LK LOCK Esco style horseshoe lock 47 series 0.7947LKS LOCK Esco style horseshoe lock 47 series; Use Item # 47LK 0.7947VPL PLUG Esco style plug for 47 series tooth, takes a 47VPN pin 1.0050LK LOCK Esco style rubber lock for 50 series tooth, takes a 50PN pin 0.4450LKR RATCHET LOCK Esco style rubber ratchet lock for 50 series tooth, takes a 50PNR pin 0.1555LK LOCK Esco style rubber lock for 55 series tooth, takes a 55PN pin 0.5055LKR RATCHET LOCK Esco style ratchet lock for a 55 series, takes a 55PNR ratchet pin 0.1556LK LOCK Esco style rubber lock 56 series tooth, takes a 56PN pin 0.9057LK LOCK Esco style horseshoe lock for 57 series tooth, takes a 57PN pin 0.9057LKS LOCK Esco style horseshoe lock for 57 series tooth, takes a 57PN pin; Use Item # 57LK 0.9057VPL PLUG Esco style V plug for 57 series tooth, takes a 57VPN pin 0.1966LK LOCK Esco style lock 66 series, takes a 66PN pin 0.4076LK LOCK Esco style lock for a 76 series bucket tooth, takes a 76PN pin 0.4286LK LOCK Esco style lock for 86 series tooth, takes an 86PN pin 1.00Esco Style Sidecutters

CE17748-3L LH SIDECUTTEREsco style left hand, 3 bolt sidecutter for an excavator, provides an additional 6" cut; takes 3 - 875x300 plow bolts and 3 - 875 hex nuts 44.09

CE17748-3R RH SIDECUTTEREsco style right hand, 3 bolt sidecutter for an excavator, provides an additional 6" cut; takes 3 - 875x300 plow bolts and 3 - 875 hex nuts 44.09

PDE31329 SIDECUTTER Esco style 3 bolt hole sidecutter; takes 3 - 875x300 plow bolts and 3 - 875 hex nuts 38.80PDE34687 SIDECUTTER Esco style 3 bolt hole sidecutter, takes 3 - 875x300 plow bolts and 3 - 875 hex nuts 15.00

T1154C LH SIDECUTTEREsco style left hand, 6 bolt sidecutter for an excavator, provides an additional 4" cut; takes 6 - 875x300 plow bolts and 6 - 875 hex nuts 54.54

T1155C RH SIDECUTTEREsco style right hand, 6 bolt sidecutter for an excavator, provides an additional 4" cut; takes 6 - 875x300 plow bolts and 6 - 875 hex nuts 54.54

T1156A LH SIDECUTTEREsco style left hand, 6 bolt sidecutter for an excavator, provides an additional 6" cut; takes 6 - 875x300 plow bolts and 6 - 875 hex nuts 54.67

T1157A RH SIDECUTTEREsco style right hand, 6 bolt sidecutter for an excavator, provides an additional 6" cut; takes 6 - 875x300 plow bolts and 6 - 875 hex nuts 54.67

Esco Style Teeth

18S DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; Use Item # 18TL 2.43

18TL DIRT TOOTH Esco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin 2.4318TVIP TWIN TIGER TOOTH Esco style twin tiger bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin 3.1718VIP TIGER TOOTH Esco style tiger bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin 1.76

18WTL TWIN TIGER TOOTHEsco style twin tiger bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; Use Item # 18TVIP 3.17

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)21SYL DIRT TOOTH Esco style standard dirt bucket tooth for a 21 series; takes a 21LK horseshoe lock 7.0621SYL-SB DIRT TOOTH Esco style SBIC standard dirt bucket tooth for a 21 series ; takes a 21LK horseshoe lock 8.0021TG ROCK TOOTH Esco style rock bucket tooth for a 21 series; takes a 21LK horseshoe lock 6.5022R10 RIPPER TOOTH Esco style ripper bucket tooth for a 22 series; takes a 22RPG pin and a 22RBG bushing 10.3622S DIRT TOOTH Esco style standard dirt bucket tooth for a 22 series; takes a 22PN pin and a 22LK lock 2.8722TVIP TWIN TIGER TOOTH Esco style twin tiger bucket tooth for a 22 series, takes a 22PN pin and a 22LK rubber lock 3.6022VIP TIGER TOOTH Esco style tiger bucket tooth for a 22 series, takes a 22PN pin and a 22LK rubber lock 3.4025R11-2 RIPPER TOOTH Esco style 11" long ripper bucket tooth for a 25 series; takes a 25RPG pin and a 25RBG bushing 11.2425R12 RIPPER TOOTH Esco style 12" long ripper bucket tooth for a 25 series; takes a 25RPG pin and a 25RBG bushing 12.5725RC-12 RIPPER TOOTH Esco style 12" long ripper bucket tooth for a 25 series, takes a 25RPG pin and a 25RBG bushing 15.06

25S DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock 5.07

25S-SB DIRT TOOTH Esco style conical, dirt bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock 5.0625S5F FLARE TOOTH Esco style conical, flare bucket tooth for 25 series; takes a 25-30PN pin and a 25-30LK lock 6.79

25TVIP TWIN TIGER TOOTHEsco style conical, twin tiger bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock 8.18

25VIP TIGER TOOTH Esco style conical, tiger bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock 5.87

25VIP-SB TIGER TOOTHEsco style SBIC, conical, tiger bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock 5.30

27 V KIT PIN KIT Esco style 27V kit, takes a 27VPN pin and a 27VPL plug 0.55

27S6F FLARE TOOTHEsco style conical, flare bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a 27VPL plug 15.43

27SYL DIRT TOOTHEsco style SYL dirt bucket tooth for a 27 series; takes a 27LK horseshoe lock or a 27VPN pin and a 27VPL plug 9.26

27SYL-SB DIRT TOOTHEsco style SBIC SYL dirt bucket tooth for a 27 series; takes a 27LK horseshoe lock or a 27VPN pin and a 27VPL plug 11.60

27TVIP TWIN TIGER TOOTHEsco style twin tiger bucket tooth for a 27 series; takes a 27LK horseshoe lock or 27VPN pin and a 27VPL plug 10.58

27VIP TIGER TOOTHEsco style tiger bucket tooth for a 27 series; takes a 27LK horseshoe lock or a 27VPN pin and a 27VPL plug 9.47

27VIP-SB TIGER TOOTHEsco style SBIC tiger bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a 27VPL plug 8.05

30S DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock 5.95

30S-SB DIRT TOOTHEsco style SBIC conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock 5.06

30TVIP TWIN TIGER TOOTHEsco style conical, heavy duty, twin tiger bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock 6.81

30VIP TIGER TOOTH Esco style conical, tiger bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock 6.17

30VIP-SB TIGER TOOTHEsco style SBIC conical, tiger bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock 6.30

35R ROCK TOOTH Esco style rock bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock 7.5035R14-2 RIPPER TOOTH Esco style SBIC ripper bucket tooth for a 35 series; takes a 35RPG pin and a 35RBG bushing 28.8835R15-2A RIPPER TOOTH Esco style ripper bucket tooth for a 35 series; takes a 35RPG pin and a 35RBG bushing 28.44

35S DIRT TOOTHEsco style conical, standard, dirt bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock 9.26

35S-SB DIRT TOOTHEsco style SBIC conical, standard dirt bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock 9.35

35S6F FLARE TOOTH Esco style conical, flare bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock 14.9035TVIP TWIN TIGER TOOTH Esco style twin tiger bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock 12.8035VIP TIGER TOOTH Esco style tiger bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock 7.9435VIP-SB TIGER TOOTH Esco style SBIC tiger bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock 7.7037 V KIT PIN KIT Esco style 37 V kit, takes a 37VPN pin and a 37VPL plug 0.71

37S8F FLARE TOOTHEsco style conical, flare bucket tooth for a 37 series; takes a 37VPN pin and a 37VPL plug or a 37LK horseshoe lock 26.59

37SYL DIRT TOOTHEsco style SYL dirt bucket tooth for a 37 series; takes a 37LK horseshoe lock or a 37VPN pin and a 37VPL plug 15.87

37SYL-SB DIRT TOOTHEsco style SBIC SYL dirt bucket tooth for a 37 series; takes a 37LK horseshoe lock or 37VPN pin and a 37VPL plug 18.40

37TVIP TWIN TIGER TOOTHEsco style twin tiger bucket tooth for a 37 series; takes a 37LK horseshoe lock or a 37VPN pin and a 37VPL plug 17.41


37VIP-SB TIGER TOOTHEsco style SBIC tiger bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and a 37VPL plug 13.89

39R16A RIPPER TOOTH Esco style ripper bucket tooth for a 39 series; takes a 39RPG pin and a 39RBG bushing 42.9940RDX ROCK CHISEL TOOTH Esco style rock chisel bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock 14.6840S DIRT TOOTH Esco style standard dirt bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock 15.6540S-SB DIRT TOOTH Esco style SBIC standard dirt bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock 12.7040S6F FLARE TOOTH Esco style conical, flare bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock 13.6740S7F FLARE TOOTH Esco style 7" conical flare bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock 15.2040TVIP TWIN TIGER TOOTH Esco style twin tiger bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock 18.7240VIP TIGER TOOTH Esco style tiger bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock 16.5344D14 RIPPER TOOTH Esco style ripper bucket tooth for a 44 series, takes a 44PN pin and a 44LK rubber lock 18.2044D14-5 RIPPER TOOTH Esco style ripper bucket tooth for a 44 series, takes a 44PN pin and a 44LK rubber lock 17.6045S DIRT TOOTH Esco style standard dirt bucket tooth for a 45 series; takes a 45PN pin and a 45LK lock 20.5045S-SB DIRT TOOTH Esco style SBIC standard dirt bucket tooth for a 45 series; takes a 45PN pin and a 45LK lock 19.9045S8F FLARE TOOTH Esco style conical flare bucket tooth for a 45 series; takes a 45PN pin and a 45LK lock 28.4445TVIP TWIN TIGER TOOTH Esco style twin tiger bucket tooth for a 45 series; takes a 45PN pin and a 45LK lock 18.8745VIP TIGER TOOTH Esco style tiger bucket tooth for a 45 series; takes a 45PN pin and a 45LK lock 17.2047 V KIT PIN KIT Esco style 47 V kit, takes a 47VPN pin and a 47VPL plug 0.88


47ARLB ABRASION TOOTHEsco style abrasion bucket tooth for a 47 series; takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug 43.00

47LP ROCK TOOTHEsco style rock bucket tooth for a 47 series; takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug 19.00

47R ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 47 series; takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug 23.00

47S9F FLARE TOOTHEsco style conical, flare bucket tooth for a 47 series; takes a 47VPN pin and a 47VPL plug or a 47LK horseshoe lock 32.98

47SYL DIRT TOOTHEsco style standard dirt bucket tooth for a 47 series; takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug 23.81

47SYL-SB DIRT TOOTHEsco style SBIC standard dirt bucket tooth for a 47 series; takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug 26.70

47TVIP TWIN TIGER TOOTHEsco style twin tiger bucket tooth for a 47 series; takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug 26.90

47TVP SHORT TWIN TIGER TOOTHEsco style short twin tiger bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug 26.90


50R ROCK TOOTH Esco style rock bucket tooth for a 50 series; takes a 50PN pin and a 50LK lock 23.1550S DIRT TOOTH Esco style dirt bucket tooth for a 50 series; takes a 50PN pin and a 50LK lock 24.4350VIP TIGER TOOTH Esco style tiger bucket tooth for a 50 series; takes a 50PN pin and a 50LK lock 30.2054D16 RIPPER TOOTH Esco style ripper bucket tooth for a 54 series, takes a 54PN pin and a 54LK rubber lock 36.3055LP ROCK TOOTH Esco style rock bucket tooth for a 55 series; takes a 55PN pin and a 55LK lock 37.5056FP FLARE TOOTH Esco style flare bucket tooth for a 56 series, takes a 56PN pin and a 56LK rubber lock 30.4257 V KIT PIN KIT Esco style 57 V kit, takes a 57VPN pin and a 57VPL plug 0.6957SYL DIRT TOOTH Esco style dirt bucket tooth for a 57 series; takes a 57LK horseshoe lock 38.3657TF TILT FRONT TOOTH Esco style 57 series tilt front bucket tooth 63.0057TVIP TWIN TIGER TOOTH Esco style helilock twin tiger bucket tooth for a 57 series; takes a 57LK horseshoe lock 42.7757VIP TIGER TOOTH Esco style helilock tiger bucket tooth for a 57 series; takes a 57LK horseshoe lock 33.9566FP FLARE TOOTH Esco style flare bucket tooth for a 66 series; takes a 66PN pin and a 66LK lock 57.3166RDX TOOTH Esco style bucket tooth for a 66 series, takes a 66PN pin 41.89P-2 CRIMP ON TOOTH H&L style crimp on bucket tooth; Use Item # 2AHX 1.10P-2L CRIMP ON TOOTH H&L style crimp on bucket tooth; Use Item # 2AHX 1.10P-3 CRIMP ON TOOTH Hensley style heavy duty crimp on bucket tooth; Use Item # 3CHXL 2.20P-3L CRIMP ON TOOTH Hensley style heavy duty crimp on bucket tooth; Use Item # 3CHXL 2.20P-3VIP TIGER TOOTH Hensley style heavy duty, crimp on tiger bucket tooth; Use Item # 3CT 2.20

TB00147 DIRT TOOTHEsco style conical, standard, dirt bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock; Use Item # 35S 9.26

TB00394U TIGER TOOTHEsco style conical, tiger bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock; Use Item # 25VIP 5.87

TB00395 DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock; Use Item # 25S 5.07

V13SYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 13 series, takes a V13-17PN flex pin 1.85V13SYL-OEM DIRT TOOTH Esco super V general purpose dirt tooth Takes V13-17PN 1.60V13T TIGER TOOTH Esco style Super V tiger bucket tooth for a 13 series, takes a V13-17PN flex pin 1.81V13TT TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 13 series, takes a V13-17PN flex pin 1.94V13TVY TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 13 series, takes a V13-17PN flex pin 1.94V13TVY-OEM TWIN TIGER TOOTH Esco super V twin tiger tooth Takes a V13-17PN 1.30V13VY TIGER TOOTH Esco style Super V tiger bucket tooth for a 13 series, takes a V13-17PN flex pin 1.81V13VY-OEM TIGER TOOTH Esco super V tiger tooth Takes a V13-17PN 0.82V17SYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 17 series, takes a V13-17PN flex pin 3.09V17SYL-OEM DIRT TOOTH Esco super V general purpose dirt tooth Takes a V13-17PN 1.45V17T TIGER TOOTH Esco style Super V tiger bucket tooth for a 17 series, takes a V13-17PN flex pin 2.38V17TT TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 17 series, takes a V13-17PN flex pin 2.38V17TVY TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 17 series, takes a V13-17PN flex pin 2.38V17TVY-OEM TWIN TIGER TOOTH Esco super V twin tiger tooth Takes a V13-17PN 1.30

V17TYL DIRT TOOTHEsco style Super V dirt bucket tooth for a 17 series, takes a V13-17PN flex pin; Use Item # V17SYL 3.09

V17VY TIGER TOOTH Esco style Super V tiger bucket tooth for a 17 series, takes a V13-17PN flex pin 2.38V17VY-OEM TIGER TOOTH Esco super V tiger tooth Takes a V13-17PN 1.08

V19ADABRASION PENETRATIONTOOTH Esco style Super V abrasion penetration bucket tooth for a 19 series, takes a V23PN flex pin 6.59

V19SYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 19 series, takes a V23PN flex pin 5.07V19T TIGER TOOTH Esco style Super V tiger bucket tooth for a 19 series, takes a V23PN flex pin 4.76V19TF FLARE TOOTH Esco style Super V flare bucket tooth for a 19 series, takes a V23PN flex pin 6.20V19TT TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 19 series, takes a V23PN flex pin 5.34V19TVY TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 19 series, takes a V23PN flex pin 5.34V19VY TIGER TOOTH Esco style Super V tiger bucket tooth for a 19 series, takes a V23PN flex pin 4.76


V23AR ROCK ABRASION TOOTH Esco style Super V rock abrasion bucket tooth for a 23 series, takes a V23PN flex pin 11.99V23S5F FLARE TOOTH Esco style Super V flare bucket tooth for a 23 series, takes a V23PN flex pin 8.80

V23SHVPENETRATION ABRASIONTOOTH Esco style Super V penetration abrasion bucket tooth for a 23 series, takes a V23PN flex pin 8.18

V23SYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 23 series, takes a V23PN flex pin 6.94V23T TIGER TOOTH Esco style Super V tiger bucket tooth for a 23 series, takes a V23PN flex pin 6.01V23TT TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 23 series, takes a V23PN flex pin 7.20V23TVY TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 23 series, takes a V23PN flex pin 7.20V23TY DIRT TOOTH Esco style Super V dirt bucket tooth for a 23 series, takes a V23PN flex pin 7.19V23VY TIGER TOOTH Esco style Super V tiger bucket tooth for a 23 series, takes a V23PN pin 6.01


Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)V29AR ROCK ABRASION TOOTH Esco style Super V rock abrasion bucket tooth for a 29 series, takes a V29PN flex pin 16.80V29RYL ROCK TOOTH Esco style Super V rock bucket tooth for a 29 series, takes a V29PN flex pin 9.79V29S6F FLARE TOOTH Esco style Super V flare bucket tooth for a 29 series, takes a V29PN flex pin 14.00V29SDX ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 29 series, takes a V29PN flex pin 10.14


V29SYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 29 series, takes a V29PN flex pin 13.84V29TVY TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 29 series, takes a V29PN flex pin 12.50V29TYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 29 series, takes a V29PN flex pin 10.98V29VY TIGER TOOTH Esco style Super V tiger bucket tooth for a 29 series, takes a V29PN flex pin 12.97


V33AR ROCK ABRASION TOOTH Esco style Super V rock abrasion bucket tooth for a 33 series, takes a V33PN flex pin 22.40V33S7F FLARE TOOTH Esco style Super V flare bucket tooth for a 33 series, takes a V33PN flex pin 20.00V33SDX ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 33 series, takes a V33PN flex pin 15.65


V33SYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 33 series, takes a V33PN flex pin 17.48V33TVY TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 33 series, takes a V33PN flex pin 13.73V33VY TIGER TOOTH Esco style Super V tiger bucket tooth for a 33 series, takes a V33PN flex pin 12.72


V39AR ROCK ABRASION TOOTH Esco style Super V rock abrasion bucket tooth for a 39 series, takes a V39PN flex pin 34.39V39RYL ROCK TOOTH Esco style Super V rock bucket tooth for a 39 series, takes a V39PN flex pin 19.38V39S8F FLARE TOOTH Esco style Super V flare bucket tooth for a 39 series, takes a V39PN flex pin 28.00V39SDX ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 39 series, takes a V39PN flex pin 21.39




V43AR ROCK ABRASION TOOTH Esco style Super V rock abrasion bucket tooth for a 43 series, takes a V43PN flex pin 46.39V43RYL ROCK TOOTH Esco style Super V rock bucket tooth for a 43 series, takes a V43PN flex pin 26.39V43S9F FLARE TOOTH Esco style Super V flare bucket tooth for a 43 series, takes a V43PN flex pin 39.00V43SDX ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 43 series, takes a V43PN flex pin 29.54




V51AGPENETRATION ABRASION TOOTH Esco style penetration abrasion tooth for a Super V51 series, takes a V51PN flex pin 50.71

V51AR ROCK ABRASION TOOTH Esco style Super V rock abrasion bucket tooth for a 51 series, takes a V51PN flex pin 61.00V51RYL ROCK TOOTH Esco style Super V rock bucket tooth for a 51 series, takes a V51PN flex pin 35.19V51S10F FLARE TOOTH Esco style Super V flare bucket tooth for a 51 series, takes a V51PN flex pin 50.00V51SD ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 51 series, takes a V51PN flex pin 36.20V51SDX ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 51 series, takes a V51PN flex pin 39.99


V51SYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 51 series, takes a V51PN flex pin 35.00V51TVY TWIN TIGER TOOTH Esco style Super V twin tiger bucket tooth for a 51 series, takes a V51PN flex pin 37.00V51TYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 51 series, takes a V51PN flex pin 39.99V51VY TIGER TOOTH Esco style Super V tiger bucket tooth for a 51 series, takes a V51PN flex pin 29.00


V59AGPENETRATION ABRASION TOOTH Esco style penetration abrasion tooth for a Super V59 series, takes a V59PN flex pin 63.93

V59AR ROCK ABRASION TOOTH Esco style rock abrasion tooth for a Super V59 series, takes a V59PN flex pin 88.18V59RYL ROCK CHISEL TOOTH Esco style rock chisel tooth for a Super V59 series, takes a V59PN flex pin 44.09V59SD ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 59 series, takes a V59PN flex pin 45.39V59SDX ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 59 series, takes a V59PN flex pin 50.40




V61AGPENETRATION ABRASIONTOOTH Esco style Super V penetration abrasion bucket tooth for a 61 series, takes a V61PN flex pin 77.58

V61SD ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 61 series, takes a V61PN flex pin 56.79V61SDX ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 61 series, takes a V61PN flex pin 57.00


V61SYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 61 series, takes a V61PN flex pin 51.98V61TVP TIGER TOOTH Esco style Super V tiger bucket tooth for a 61 series, takes a V61PN flex pin 63.00V61VX TIGER TOOTH Esco style Super V tiger bucket tooth for a 61 series, takes a V61PN flex pin 46.00V69ADB ROCK PENETRATOR TOOTH Esco style rock penetration tooth for a Super V69 series, takes a V69PN flex pin 125.66


V69AGPENETRATION ABRASION TOOTH Esco style rock penetration abrasion tooth for a Super V69 series, takes a V69PN flex pin 108.03

V69SD ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 69 series, takes a V69PN flex pin 88.85V69SYL DIRT TOOTH Esco style Super V dirt bucket tooth for a 69 series, takes a V69PN flex pin 85.98V69VX ROCK PENETRATION TOOTH Esco style rock penetration tooth for a Super V69 series, takes a V69PN flex pin 73.85V71ADB ROCK PENETRATION TOOTH Esco style rock penetrator tooth for a Super V71 series, takes a V71PN flex pin 154.32V71ADHL ABR. PENETRATOR TOOTH Esco style abrasion penetration tooth for a Super V71 series, takes a V71PN flex pin 200.62V71RYL ROCK CHISEL TOOTH Esco style rock chisel tooth for a Super V71 series, takes a V71PN flex pin 97.00V71SD ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 71 series, takes a V71PN flex pin 100.53V81RYL ROCK CHISEL TOOTH Esco style rock chisel tooth for a Super V81 series, takes a V81PN flex pin 154.32V81SD ROCK CHISEL TOOTH Esco style Super V rock chisel bucket tooth for a 81 series, takes a V81PN flex pin 156.53

Esco Style Weld-On NosesWN40 NOSE PIECE Esco style weld on nose for a 40 series adapter 6.00WN-43 NOSE PIECE Esco style weld on nose for a V43 series, takes a V43PN flex pin 22.05WN47 NOSE PIECE Esco style weld on nose for a 47 series adapter 7.00WN-59 NOSE PIECE Esco style weld on nose for a V59 series, takes a V59PN flex pin 44.09WN-V19 NOSE PIECE Esco style weld on nose for a V19 series, takes a V23PN flex pin 4.40WN-V33 NOSE PIECE Esco style weld on nose for a V33 series, takes a V33PN flex pin 11.02WN-V39 NOSE PIECE Esco style weld on nose for a V39 series, takes a V39PN flex pin 17.64

Fabco Style PartsFabco Style Adapters

16L3BW-8-24 WELD ON ADAPTERH&L style weld on, wrap around adapter with a 1 1/4" lip thickness for a 240 series bucket tooth; Use Item # 2740W24 4.76

16S7-8-23 WELD ON ADAPTERH&L style weld on, wrap around, short leg adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item # 2740W23 3.77

1S7823 WELD ON ADAPTERH&L style weld on, wrap around adapter for a 230 series, has a 1" lip thickness; Use Item #2740AW23 3.53

20L3BW-8-25 WELD ON ADAPTERH&L style weld on, wrap around adapter with a 1 1/4" lip thickness for a 250 series bucket tooth; Use Item # 2740W25 7.12

D1002-23 WELD ON ADAPTERH&L style weld on, wrap around, short leg adapter with a 1" lip thickness for a 230 series bucket tooth 3.48

D26368 WELD ON ADAPTERH&L style weld on adapter with a .63" to .75" lip thickness, takes a 3CHXL crimp on bucket tooth; Use Item #834-3C 2.68

L3445-23 BOLT ON ADAPTER Fabricated style bolt on adapter with a 3/4" lip thickness for a 23 series bucket tooth 6.38

TB-1001-23 TOOTH BAR ADAPTERFabricated style tooth bar adapter with a 1.41" lip thickness for a 230 series bucket tooth; takes a 23FP flex pin 4.20

Fabco Style PinsRP-H23 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09RP-H24 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item #24FP 0.12RP-H25 FLEX PIN H&L style flex pin for a 250 series bucket tooth; Use Item #25FP 0.20Fabco Style Shanks

8075-10 SCARIFIER SHANKFabricated style scarifier shank; takes a 1 3/4F scarifier/ripper, crimp-on bucket tooth; this shank is 2 1/2" wide and 18 3/4" in length 8.48

8075-20 SCARIFIER SHANK Fabricated style scarifier shank; takes a 1 3/4F scarifier/ripper, crimp-on bucket tooth 9.44Fabco Style Teeth1 3/4F CRIMP ON TOOTH Fabricated style scarifier/ripper crimp-on bucket tooth 1.201 3/4FC CRIMP ON TOOTH H&L style scarifier/ripper crimp-on bucket tooth 1.062300NHC DIRT TOOTH Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156 1.202310NHC TIGER TOOTH Hensley style tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156T 2.572320NHC TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156WT 2.6523F FABRICATED TOOTH H&L style fabricated bucket tooth for a 230 series, takes a 23FP flex pin 2.0023FC DIRT TOOTH H&L style cast dirt bucket tooth for a 230 series, takes a 23FP flex pin 2.0924F DIRT TOOTH H&L style dirt bucket tooth for a 240 series, takes a 24FP flex pin 3.092A FABRICATED TOOTH H&L style fabricated bucket tooth, takes a 2AP roll pin 0.992AC CAST TOOTH H&L style cast bucket tooth, takes a 2AP roll pin 1.343C FABRICATED TOOTH H&L style fabricated bucket tooth 1.508023 FABRICATED TOOTH H&L style fabricated bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #23F 2.008825 STAR TOOTH H&L style star bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #252ST 3.208075 CRIMP ON TOOTH Fabricated style scarifier/ripper crimp on bucket tooth; Use Item #1 3/4F 1.208002A FABRICATED TOOTH H&L style fabricated bucket tooth; Use Item #2A 0.998003C CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.208075C Crimp-On Cast Tooth Fabco style cast scarifier/ripper crimp-on bucket tooth, Use Item # 1 3/4FC 1.068330 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.988623-1 TIGER TOOTH H&L style tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230T 2.518723TP-1 TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230WT 3.618824 DIRT TOOTH H&L style dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 24F 3.098340 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240 4.198624TP TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240WT 4.638103C FABRICATED TOOTH H&L style fabricated bucket tooth; Use Item # 3C 1.50

Fanngs Style PartsFanngs Style PinsTF23P FLEX PIN Fanggs style long flex pin for a 230 series bucket tooth 0.09TF25P LONG PIN Fanggs style long flex pin for a 250 series bucket tooth 0.15Fanngs Style TeethTF23D FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 230 series; takes a TF23P flex pin 3.79TF290 FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 290 series; takes a P290 flex pin 11.46TF330 FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 330 series; takes a P330 flex pin 15.22TF400 FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 400 series; takes a P400HD flex pin 21.90

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)Fiat Style PartsFiat Style Adapters

1002622 WELD ON ADAPTER Hensley style weld on adapter for a 156 series with a 3/4" to 1" lip thickness; Use Item #X834-156 4.401009357 WELD ON ADAPTER Hensley style weld on adapter for a 156 series with a 1" lip thickness; Use Item #X550-156 4.40

2014922 WELD ON ADAPTER Hensley style weld on adapter for a 156 series with a 3/4" to 1" lip thickness; Use Item #X834-156 4.402017634 WELD ON ADAPTER H&L style weld on adapter for a 23 series bucket tooth with a 1" lip thickness; Use Item #834-23 3.04

73109928 WELD ON ADAPTERH&L style weld on adapter with a 1" lip thickness for a 230 series bucket tooth, takes a 23FP flex pin; Use Item # 834-23 3.04

73109929 SHORT LEG ADAPTERH&L style wrap around, short leg adapter with a 3/4" lip thickness for a 230 series bucket tooth, takes a 23FP flex pin; Use Item # 2740W23 3.77

Fiat Style Pins2-18735 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.092017635 FLEX PIN H&L style flex pin for a 23 series bucket tooth; Use Item #23FP 0.092019642 FLEX PIN H&L style flex pin for a 24 series bucket tooth; Use Item #24FP 0.1220853P ROLL PIN Hensley style roll pin; the pin is 3" long with a 1/2" pin diameter; Use Item #P160 0.12

654172-P ROLL PINHensley style coiled roll pin for a 160 series bucket tooth; the pin is 3" long with a 1/2" pin diameter; Use Item #P160 0.12

70199012 FLEX PIN H&L style flex pin for a 25 series bucket tooth; Use Item #25FP 0.2070666356 FLEX PIN H&L style flex pin for a 27 series bucket tooth; Use Item #27FP 0.2070666943 FLEX PIN H&L style flex pin for a 270 series bucket tooth; Use Item # 27FP 0.2070666983 FLEX PIN H&L style flex pin for a 27 series bucket tooth; Use Item #27FP 0.2071099012 FLEX PIN H&L style flex pin for a 25 series bucket tooth; Use Item # 25FP 0.2071407832 PIN Esco style pin for a 22 series, takes a 22LK lock; Use Item # 22PN 0.2071467242 PIN Esco style pin for a 22 series, takes a 22LK lock; Use Item # 22PN 0.2073066600 FLEX PIN H&L style flex pin for a 270 series bucket tooth; Use Item # 27FP 0.2073109926 FLEX PIN H&L style flex pin for a 23 series bucket tooth; Use Item #23FP 0.0973109927 FLEX PIN H&L style flex pin for a 24 series bucket tooth; Use Item #24FP 0.127602838 FLEX PIN H&L style flex pin for a 270 series bucket tooth; Use Item # 27FP 0.2076028389 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item # 24FP 0.1279073815 FLEX PIN H&L style flex pin for a 250 series bucket tooth; Use Item # 25FP 0.20

918245 ROLL PINHensley style roll pin for a 160 series bucket tooth; the pin is 3" long with a 1/2" pin diameter; Use Item #P160 0.12

921200 ROLL PIN Hensley style roll pin; the pin is 3" long with a 1/2" pin diameter; Use Item #P160 0.12Fiat Style Retainers71407833 RUBBER LOCK Esco style rubber lock for a 22 series, takes a 22PN pin; Use Item # 22LK 0.0571467243 RUBBER LOCK Esco style rubber lock for a 22 series, takes a 22PN pin; Use Item # 22LK 0.05

78110796 RUBBER LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item # 25-30LK 0.02

Fiat Style Teeth20853 DIRT TOOTH Fiat allis style standard dirt bucket tooth, takes a 24FP flex pin 3.8462160 SCARIFIER TOOTH Caterpillar style scarifier bucket tooth; Use Item #2D5572 3.301001044 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.192014921 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.202017636 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.982019644 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.197602616 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240 4.1970062160 SCARIFIER TOOTH Caterpillar style scarifier bucket tooth; Use Item #2D5572 3.3070666984 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.1670679206 DIRT TOOTH Case style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.1670684378 DIRT TOOTH Case style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.0670685436 FABRICATED TOOTH H&L style fabricated scarifier/ripper crimp on bucket tooth; Use Item #1 3/4F 1.2070692522 DIRT TOOTH Case style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06

71407828 DIRT TOOTHEsco style standard dirt bucket tooth for a 22 series; takes a 22PN pin and a 22LK lock; Use Item # 22S 2.87


73020853 DIRT TOOTH Fiat allis style standard dirt bucket tooth, takes a P160 roll pin; Use Item #20853 3.8473062624 DIRT TOOTH Case style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.1973065066 DIRT TOOTH Case style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.1673066439 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.1973070461 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.1973109921 DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.3473109922 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.2073109923 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.9873109924 DIRT TOOTH Fiat allis style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.9873109925 DIRT TOOTH Case style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.1973109933 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.1973109934 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.20

73109935 TIGER TOOTHFiat allis style heavy duty, tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.51

73115404 DIRT TOOTH Case style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.0673115405 DIRT TOOTH Case style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.1673115406 DIRT TOOTH Fiat allis style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.9876022620 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.0676026616 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.1976026619 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240 4.1976026620 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item # 250 7.0676026622 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.16

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)76079206 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item # 270 8.16666984-0 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.16H-162 DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.34

Ford-New Holland Style PartsFord-New Holland Style Adapters

190798 WELD ON ADAPTERH&L style weld on loader adapter with a .63" to .75" lip thickness for a 3C bucket tooth; Use Item #834-3C 2.68

293006 WELD ON ADAPTERH&L style weld on, loader adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #834-23 3.04

54C-122 WELD ON ADAPTERH&L style weld on, loader adapter with a .63" to .88" lip thickness for a 2A bucket tooth; Use Item #835-2A 1.50

70090-32082 WELD ON ADAPTERHensley style weld on adapter with a 5/8" lip thickness for a 156 series bucket tooth, takes a P156 roll pin; Use Item # X230-156 3.81

7700626 WELD ON ADAPTEREsco style weld on loader adapter for an 18 series bucket tooth with a 1" lip thickness; Use Item #833-18 3.53

7703112 WELD ON ADAPTERH&L style wrap around, weld on adapter with a 1 1/4" lip thickness for a 240 series bucket tooth, takes a 24FP flex pin; Use Item # 2740W24 4.76

7703116 WELD ON ADAPTERH&L style wrap around adapter with a 1 1/4" lip thickness for a 250 series bucket tooth, takes a 25FP flex pin; Use Item # 2740W25 7.12

7703990 WELD ON ADAPTERH&L style weld on, wrap around adapter with a 1" lip thickness for a 230 series bucket tooth, takes a 23FP flex pin; Use Item # 2740AW23 3.77

7704302 SHORT LEG ADAPTERH&L style wrap around, short leg adapter with a 3/4" lip thickness for a 230 series bucket tooth, takes a 23FP flex pin; Use Item # 2740W23 3.77

7704801 WELD ON ADAPTERH&L style weld on, loader adapter with a .63" to .88" lip thickness for a 2A bucket tooth; Use Item #835-2A 1.50

7704802 WELD ON ADAPTER H&L style weld on loader adapter for a 3C bucket tooth; Use Item #834-3C 2.68

7704803 WELD ON ADAPTERH&L style weld on, loader adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #834-23 3.04

85821788 CENTER WELD ON ADAPTERFord-New Holland style weld-on, center adapter for an excavator and for a J200 series bucket tooth with a 3/4" lip thickness; Use Item # 119-3205 3.31

9827955 FLUSH MOUNT ADAPTERH&L style flush mount weld on loader adapter with a .75" lip thickness for a 230 series bucket tooth; Use Item #CL-1001-23 3.97

T41165 FLUSH MOUNT ADAPTERH&L style flush mount adapter with a .75" lip thickness for a 230 series bucket tooth; Use Item # CL-1001-23 3.97

Ford-New Holland Style Cutting Edges

86577169 CENTER EDGENew Holland style bolt on center cutting edge for a 71.874" New Holland Backhoe Bucket. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 71.874" in length. 111.00

86577173 CENTER EDGENew Holland style bolt on center cutting edge for a 83.874" New Holland Backhoe Bucket. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 83.874" in length. 128.99

Ford-New Holland Style Pins293007 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.097700621 PIN Esco style pin, takes an 18-20LK lock; Use Item #18-20PN 0.097703114 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item # 24FP 0.127703118 FLEX PIN H&L style flex pin for a 250 series bucket tooth; Use Item # 25FP 0.207706612 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item # 24FP 0.127706613 FLEX PIN H&L style flex pin for a 250 series bucket tooth; Use Item #25FP 0.209673569 ROLL PIN Hensley style roll pin for a 156 series bucket tooth; Use Item # P156 0.049843728 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item # 23FP 0.09D9NNA335AA FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09D9NNA335BA FLEX PIN H&L style flex pin for 240 series bucket tooth; Use Item #24FP 0.12E7NNA161AA PIN John Deere style pin for a 555 ford bucket tooth; Use Item # 62380 0.07Ford-New Holland Style Retainers7700623 RUBBER LOCK Esco style lock, takes an 18-20PN pin; Use Item #18-20LK 0.0285801098 WASHER Caterpillar style washer; Use Item # 4T0001 0.02

Ford-New Holland Style Shanks

ECOE-155 SCARIFIER SHANKH&L style gannon shank for a 1 3/4" bucket tooth; it is 16" long, 2 3/8" wide and 5/8" thick; Use Item # H920 7.72

Ford-New Holland Style Teeth114549 CRIMP ON TOOTH H&L style crimp on bucket tooth; Use Item #3CHXL 2.20218960 FABRICATED TOOTH New Holland style fabricated bucket tooth, takes a 2AP roll pin; Use Item #2A 0.99251472 FABRICATED TOOTH New Holland style fabricated bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #23F 2.00251473 DIRT TOOTH H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98251474 TIGER TOOTH H&L style heavy duty, tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.51251475 TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230WT 3.61251476 FLARE TOOTH H&L style flare bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230F 3.37251477 FABRICATED TOOTH New Holland style fabricated bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #24F 3.09251478 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.19251479 FLARE TOOTH H&L style flare bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240F 4.40251480 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06251481 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item # 250 7.06270163 DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.34290206 CRIMP ON TOOTH H&L style crimp on bucket tooth; Use Item #3CHXL 2.202910206F CRIMP ON TOOTH Hensley style heavy duty crimp on bucket tooth; Use Item # 3CHXL 2.20293008 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98366330 DIRT TOOTH Ford/New Holland style standard dirt bucket tooth; takes a 62380 pin; Use Item # 555 2.4354C-121 DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.34555 DIRT TOOTH Ford/New Holland style standard dirt bucket tooth for a 555 series; takes a 62380 pin 2.43

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)555T TIGER TOOTH Ford/New Holland style tiger bucket tooth for a 555 series, takes a 62380 pin 2.65555WT TWIN TIGER TOOTH Ford/New Holland style twin tiger bucket tooth for a 555 series; takes a 62380 pin 3.1762380 TWIN TIGER TOOTH Ford style twin tiger bucket tooth 3.17964499 TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240WT 4.63

7700622 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series, takes an 18-20LK lock and an 18-20PN pin; Use Item #18TL 2.43

7703113 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.197703117 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.0677004802 CRIMP ON TOOTH New Holland style crimp on bucket tooth; Use Item #3CHXL 2.20

85801096 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item # 1U3202 3.09

85811432 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J200 series; takes a 9W7112 pin and an 8E6209 sleeved retainer; Use Item # 1U3202 3.09

86109128 TIGER TOOTH Hensley style tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156T 2.5786109129 TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156WT 2.65

87612492 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J200 series, takes a 9W7112 pin and an 8E6209 retainer; Use Item # 1U3202 3.09

98724643 STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230ST 2.659624498 TIGER TOOTH New Holland style tiger bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240T 3.66

9624499 TWIN TIGER TOOTHNew Holland style twin tiger bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240WT 4.63

9673568 DIRT TOOTH Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156 1.2070002-00493 FABRICATED TOOTH H&L style fabricated bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 23F 2.0070090-32083 DIRT TOOTH Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156 1.2070090-32086 LONG TOOTH Hensley style long dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156L 1.76

858N432 DIRT TOOTHCaterpillar style standard dirt bucket tooth for a J200 series, takes a 9W7112 pin and an 8E6209 retainer; Use Item # 1U3202 3.09

9624498DS STAR TOOTH H&L style star bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240ST 4.209624743DS STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230ST 2.65D3NN302A DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.19D3NN302B DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06D3NN302C DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98D3NN302CT TIGER TOOTH H&L style heavy duty tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.51D58590 FABRICATED TOOTH H&L style fabricated bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 23F 2.00D58593 FABRICATED TOOTH H&L style fabricated bucket tooth; Use Item # 3C 1.50E7NN295AA DIRT TOOTH Ford/New Holland style standard dirt bucket tooth; takes a 62380 pin; Use Item # 555 2.43ECOE34 FABRICATED TOOTH H&L style fabricated scarifier/ripper crimp on bucket tooth; Use Item # 1 3/4F 1.20FINN302AA DIRT TOOTH Ford/New Holland style standard tiger bucket tooth, takes a 62380 pin; Use Item #555T 2.43FINN302BA TWIN TIGER TOOTH Ford/New Holland style twin tiger bucket tooth; takes a 62380 pin; Use Item # 555WT 3.17FP-186 TIGER TOOTH H&L style tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250T 6.19FP-187 TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250WT 6.57FP186 TIGER TOOTH H&L style tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250T 6.19

Gallion Style PartsGallion Style Teeth

162739 UNITOOTHCaterpillar style unitooth with a 11/16" lip thickness, the bolt hole spacing is 2 1/2" from center to center; takes 2 - 5/8" bolts and nuts; Use Item # 135-9390 4.04

31281C SCARIFIER TOOTH Caterpillar style gallion scarifier tooth, fits on a 31280D scarifier shank 2.65

Geith Style PartsGeith Style Side Cutters

44SCL LH SIDECUTTERGeith style left hand, 3 bolt sidecutter for an excavator; takes 3 - 875x300 plow bolts and 3 - 875 hex nuts; bolt hole spacing is 6" from center to center 18.98

44SCR RH SIDECUTTERGeith style right hand, 3 bolt sidecutter for an excavator; takes 3 - 875x300 plow bolts and 3 - 875 hex nuts; bolt hole spacing is 6" from center to center 18.98

H&L Style PartsH&L Style 5 Packs1 3/4F (5PK) 5 PACKS - DIRT H&L style 1 3/4F 5 Pack, includes 5 - 1 3/4F fabricated dirt bucket teeth 6.00230 5 PACK-TF23P 5 PACKS-DIRT H&L style 230 5 Pack, includes 5-230 dirt bucket teeth and 5-TF23P long flex pins 15.99230F (5PK) 5 PACKS - FLARE H&L style 230F 5 Pack, includes 5 - 230F flare bucket teeth and 5 - 23FP flex pins 17.30230ST (5PK) 5 PACKS - STAR H&L style 230ST 5 Pack, includes 5 - 230ST bucket teeth and 5 - 23FP flex pins 12.80230T (5PK) 5 PACKS - TIGER H&L style 230T 5 Pack, includes 5 - 230T tiger bucket teeth and 5 - 23FP flex pins 12.75230WT (5PK) 5 PACKS - TWIN TIGER H&L style 230WT 5 Pack, includes 5 - 230WT twin tiger bucket teeth and 5 - 23FP flex pins 18.99

230WT-230T (5PK) 5 PACKS - TWIN TIGER/TIGERH&L style 5 pack, 2 of 230WTL twin tiger bucket teeth, 3 of 230TL tiger bucket teeth and 5 - 23FP flex pins 15.20

23TL (5PK) 5 PACKS - TIGER H&L style 23TL 5 Pack, includes 5 - 23TL tiger bucket teeth and 5 - 23FP flex pins 10.9023WTL (5PK) 5 PACKS - TWIN TIGER H&L style 23WTL 5 Pack, includes 5 - 23WTL twin tiger bucket teeth and 5 - 23FP flex pins 13.45

23WTL-23TL (5PK) 5 PACKS - TWIN TIGER/TIGERH&L style 5 pack, 2 of 23WTL twin tiger bucket teeth, 3 of 23TL tiger bucket teeth and 5 - 23FP flex pins 11.92

240 (5PK) 5 PACKS - DIRT H&L style 240 5 Pack, includes 5 - 240 dirt bucket teeth and 5 - 24FP flex pins 19.35250 (5PK) 5 PACKS - DIRT H&L style 250 5 Pack, includes 5 - 250 dirt bucket teeth and 5 - 25FP flex pins 36.302A (5PK) 5 PACKS - DIRT H&L style 2A 5 Pack, incudes 5 - 2A dirt bucket teeth and 5 - 2AP roll pins 5.002AHX (5PK) 5 PACKS - DIRT H&L style 2AHX 5 Pack, includes 5 - 2AHX crimp on bucket teeth 5.003CHXL (5PK) 5 PACKS - DIRT H&L style 3CHXL 5 Pack, includes 5 - 3CHXL crimp on dirt bucket teeth 11.00H&L Style Adapters2300FL FLUSH MOUNT ADAPTER H&L style flush mount adapter for a 230 series bucket tooth; Use Item # CL-1001-23 3.97230FL FLUSH MOUNT ADAPTER H&L style flush mount adapter for a 230 series bucket tooth; Use Item # CL-1001-23 3.9723FL FLUSH MOUNT ADAPTER H&L style flush mount adapter for a 230 series bucket tooth; Use Item # CL-1001-23 3.972740AW23 WELD ON ADAPTER H&L style weld on, wrap around adapter with a 1" lip thickness for a 230 series bucket tooth 3.53

2740AW-252 WELD ON ADAPTERH&L style wrap around, weld on adapter with a 1 1/4" lip thickness for a 250 series bucket tooth, takes a 25FP flex pin; Use Item # 2740W25 7.12

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)2740MW23 WELD ON ADAPTER H&L style weld on adapter for a 230 series bucket tooth with a 3/4" lip thickness 4.30

2740W23 WELD ON ADAPTERH&L style weld on, wrap around, short leg adapter with a 1" lip thickness for a 230 series bucket tooth 3.77

2740W24 WELD ON ADAPTER H&L style weld on, wrap around adapter with a 1 1/4" lip thickness for a 240 series bucket tooth 4.762740W25 WELD ON ADAPTER H&L style weld on, wrap around adapter with a 1 1/4" lip thickness for a 250 series bucket tooth 7.122740ZW23 WELD ON ADAPTER H&L style weld on, wrap around adapter with a 1"lip thickness for a 230 series bucket tooth 3.972898W00 WELD ON ADAPTER H&L style weld-on adapter, takes an 00SPS bucket tooth 1.10

834-23 WELD ON ADAPTER H&L style weld on, excavator adapter with a 5/8" - 3/4" lip thickness for a 230 series bucket tooth 3.04834-3C WELD ON ADAPTER H&L style weld on, excavator adapter with a .63" to .75" lip thickness for a 3C bucket tooth 2.68835-2A WELD ON ADAPTER H&L style weld on, excavator adapter with a .63" to .88" lip thickness for a 2A bucket tooth 1.508580-23 BOLT ON ADAPTER H&L style bolt on adapter for a 230 series bucket tooth 7.40CL-1001-23 FLUSH MOUNT ADAPTER H&L style flush mount adapter with a .75" lip thickness for a 230 series bucket tooth 3.97

D1002-23 WELD ON ADAPTERH&L style weld on, wrap around, short leg adapter with a 1" lip thickness for a 230 series bucket tooth 3.48

D49586 BOLT ON ADAPTERFabco style bolt on adapter with a 3/4" lip thickness for a 230 series bucket tooth; Use Item #L3445-23 6.38

L3283-24 BOLT ON ADAPTER H&L style bolt on adapter 10.00TB-1001-23 TOOTH BAR ADAPTER Fabricated style tooth bar adapter for a 230 series bucket tooth, takes a 23FP flex pin 4.20

U43792 WELD ON ADAPTERJohn Deere style weld on, wrap around, short leg adapter with a 1" lip thickness for a 230 series bucket tooth 1.87

X156-23 BOLT ON ADAPTERHensley style bolt on adapter for a 230 series bucket tooth; distance between bolt holes is 3" center to center 4.60

H&L Style Assemblies

00SPS ASSY WELD ON ASSEMBLYH&L style assembly for a mini excavator, takes a 00SPS crimp on bucket tooth and a 2898WOO weld on adapter 1.61

230 B/O ASSY BOLT ON ASSEMBLYH&L style 230 bolt on assembly, takes a 230 dirt bucket tooth, an X156-23 bolt on adapter and a 23FP flex pin; comes with 2 - 5/8" bolts and nuts 8.05

230 W/O ASSY WELD ON ASSEMBLYH&L style 230 weld on assembly, takes a 230 dirt bucket tooth, a 2740W23 weld on adapter and a 23FP flex pin

230FM ASSY WELD ON ASSEMBLYH&L style 230 weld on flush mount assembly, takes a 230 dirt bucket tooth, a CL-1001-23 weld on flush mount adapter and a 23FP flex pin 7.12

23F F/M ASSY WELD ON ASSEMBLYH&L style 23F weld on flush mount assembly, takes a 23FC dirt bucket tooth, a CL-1001-23 weld on flush mount adapter and a 23FP flex pin 6.15

3C ASSY WELD ON ASSEMBLY H&L style weld on assembly, takes a 3C bucket tooth and an 834-3C weld on adapter 4.18

H920 ASSY SCARIFIER ASSEMBLYH&L style H920 scarifier assembly, takes an H920 scarifier shank and a 1 3/4F scarifier/ripper crimp on bucket tooth; it is 18 3/4" long, 2 3/8" wide and 5/8" thick 7.72

RK230 WELD ON ASSEMBLYH&L style weld on assembly, takes a 230 standard dirt bucket tooth, a 2740W23 1" lip weld on adapter, and a 23FP flex pin 6.60

W00SP ASSY WELD ON ASSEMBLYH&L style assembly for a mini excavator, takes a 00SPS crimp on bucket tooth and a 2898W00 weld on adapter with a .69" lip thickness 1.61

H&L Style KitsRK23 STANDARD ASSEMBLY 1" lip, 2300HL tooth, 2740-23HX adapterRK23FL FLARE ASSEMBLY 1" lip, 2300F tooth, 2740-23HX adapterRK23TL TIGER ASSEMBLY 1" lip, 2300TL tooth, 2740-23HX adapterRK23W STANDARD ASSEMBLY 1" lip, 2300HL tooth, 2740W-23HX adapterRK23WTL TWIN TIGER ASSEMBLY 1" lip, 2300WTL tooth, 2740-23HX adapterRK24 STANDARD ASSEMBLY 1" lip, 2400HL tooth, 2740W-24HX adapterRK24TL TIGER ASSEMBLY 1" lip, 2400TL tooth, 2740W-24HX adapterRK24WTL TWIN TIGER ASSEMBLY 1" lip, 2400WTL tooth, 2740W-24HX adapterRK25 STANDARD ASSEMBLY 1-1/4" lip, 2500HL tooth, 2740W-25HX adapterRK25FL FLARE ASSEMBLY 1-1/4" lip, 2500F tooth, 2740W-25HX adapterRK25TL TIGER ASSEMBLY 1-1/4" lip, 2500TL tooth, 2740W-25HX adapterRK25WTL TWIN TIGER ASSEMBLY 1-1/4" lip, 2500WTL tooth, 2740W-25HX adapterH&L Style Pins18FP FLEX PIN H&L style flex pin for an 18 series bucket tooth 0.5020FP FLEX PIN H&L style flex pin for a 270 series; Use Item #27FP 0.2022FP FLEX PIN H&L style flex pin for a 220 series 0.102300FP FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item # 23FP 0.0923DLFP FLEX PIN Esco style four tab flex pin 0.0823FP FLEX PIN H&L style flex pin for a 230 series bucket tooth 0.0923P FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item # 23FP 0.092400FP FLEX PIN H&L style flex pin for a 204 series bucket tooth; Use Item # 24FP 0.1224FP FLEX PIN H&L style flex pin for a 240 series bucket tooth 0.1224P FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item # 24FP 0.1225-26P FLEX PIN H&L style flex pin for a 250 series bucket tooth; Use Item #25FP 0.202500FP FLEX PIN H&L style flex pin for a 250 series bucket toothl; Use Item # 25FP 0.2025FP FLEX PIN H&L style flex pin for a 250 series bucket tooth 0.2025P FLEX PIN H&L style flex pin for a 250 series bucket tooth; Use Item # 25FP 0.2027FP FLEX PIN H&L style flex pin for a 270 series bucket tooth 0.2027P FLEX PIN H&L style flex pin for a 270 series bucket tooth; Use Item # 27FP 0.202AP ROLL PIN H&L style 5/16" x 1 1/2" roll pin 0.01K1306 H920 CLIP This is a clip that is used to install the H920 Scarifier Shank 0.20TF23P FLEX PIN Fanggs style long flex pin for a 230 series bucket tooth 0.09H&L Style ShanksH920 SCARIFIER SHANK H&L style gannon shank that takes a 1 3/4F bucket tooth; it is 16" long, 2 3/8" wide and 5/8" thick 7.72H920-230 SHANK W/ NOSE H&L style shank with nose for a 230 series 8.82H&L Style Teeth230 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin 2.98


240 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin 4.19250 DIRT TOOTH H&L style standard bucket tooth for a 250 series, takes a 25FP flex pin 7.06270 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin 8.162300 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.982400 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240 4.192500 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item # 250 7.062620 STAR TOOTH H&L style star bucket tooth for a 252 series, takes a 25FP flex pin; Use Item #252ST 3.2000SPS CRIMP ON TOOTH H&L style crimp on bucket tooth, fits a 2898W00 weld on adapter 0.511 3/4F FABRICATED TOOTH Fabricated style scarifier/ripper crimp-on bucket tooth 1.201 3/4FC CRIMP ON TOOTH H&L style scarifier/ripper crimp on bucket tooth 1.0620AH CAST TOOTH H&L style cast bucket tooth, takes a 2AP roll pin; Use Item # 2AC 1.3422F DIRT TOOTH H&L style standard bucket tooth for a 220 series, takes a 22FP flex pin 3.3022SP DIRT TOOTH H&L style standard bucket tooth for a 220 series, takes a 22FP flex pin; Use Item # 22F 3.302300F FLARE TOOTH H&L style flare bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230F 3.372300ST STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230ST 2.652300T TIGER TOOTH H&L style tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230T 2.512300WT TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230WT 3.61230CF FLARE TOOTH H&L style flare bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230F 3.37230CPE ROCK PENETRATOR TOOTH H&L style rock penetrator bucket tooth for a 230 series, takes a 23FP flex pin 2.85

230CSP DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.98230CST STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230ST 2.65230F FLARE TOOTH H&L style flare bucket tooth for a 230 series, takes a 23FP flex pin 3.37230FG FORGED TOOTH H&L style forged dirt bucket tooth for a 230 series, takes a 23FP flex pin 3.00230FHD FLARE TOOTH H&L style heavy duty flare bucket tooth for a 230 series, takes a 23FP flex pin 4.20230SP DIRT TOOTH H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin 3.09230SP-SB DIRT TOOTH H&L style SBIC dirt bucket tooth for a 230 series, takes a 23FP flex pin 3.00230ST STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin 2.65230T TIGER TOOTH H&L style tiger bucket tooth for a 230 series, takes a 23FP flex pin 2.51230T-F TIGER TOOTH H&L style fabricated tiger bucket tooth for a 230 series, takes a 23FP flex pin 2.00230THD TIGER TOOTH H&L style tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230T 2.51230TW TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230WT 3.61230WT TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin 3.6123SP FABRICATED TOOTH H&L style fabricated bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 23F 2.0023TL TIGER TOOTH H&L style long tiger bucket tooth for a 230 series, takes a 23FP flex pin 2.0923WTL TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin 2.60240-SB TOOTH H&L style SBIC standard dirt bucket tooth for a 240 series, takes a 24FP flex pin 4.602400F FLARE TOOTH H&L style flare bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240F 4.402400T TIGER TOOTH H&L style tiger bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240T 3.662400WT TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240WT 4.63240F FLARE TOOTH H&L style flare bucket tooth for a 240 series, takes a 24FP flex pin 4.40240FAB FABRICATED TOOTH H&L style fabricated dirt bucket tooth for a 240 series, takes a 24FP flex pin 4.60240ST STAR TOOTH H&L style star bucket tooth for a 240 series, takes a 24FP flex pin 4.20240T TIGER TOOTH H&L style tiger bucket tooth for a 240 series, takes a 24FP flex pin 3.66240WT TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 240 series, takes a 24FP flex pin 4.6324F DIRT TOOTH H&L style dirt bucket tooth for a 240 series, takes a 24FP flex pin 3.09250-SB TOOTH H&L style SBIC standard bucket tooth for a 250 series, takes a 25FP flex pin 6.602500F FLARE TOOTH H&L style flare bucket tooth for a 250 series, takes a 25FP flex pin; Use Item # 250F 6.822500T TIGER TOOTH H&L style tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item # 250T 6.192500WT TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item # 250WT 6.57250F FLARE TOOTH H&L style flare bucket tooth for a 250 series, takes a 25FP flex pin 6.82250FAB FABRICATED TOOTH H&L style fabricated dirt bucket tooth for a 250 series, takes a 25FP flex pin 7.00250H HD TOOTH H&L style heavy duty bucket tooth for a 250 series, takes a 25FP flex pin 6.39250ST STAR TOOTH H&L style star bucket tooth for 250 series, takes a 25FP flex pin 6.90250T TIGER TOOTH H&L style tiger bucket tooth for a 250 series, takes a 25FP flex pin 6.19250WT TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 250 series, takes a 25FP flex pin 6.57252ST STAR TOOTH H&L style star bucket tooth for a 252 series, takes a 25FP flex pin 3.20270H HD TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin 7.802AHX CRIMP ON TOOTH H&L style crimp on bucket tooth 1.1031SP TOOTH H&L style bucket tooth 18.893CHX CRIMP ON TOOTH Hensley style heavy duty crimp on bucket tooth; Use Item # 3CHXL 2.203CHXL CRIMP ON TOOTH Hensley style heavy duty crimp on bucket tooth 2.20

CL-1003R UNITOOTHH&L style unitooth with a .65" lip thickness and a 1.78" bolt hole spacing, center to center; takes 2 - 1/2" x 2" CS cap screws and 2 - 1/2" CS nuts 3.74

H&L Style Weld-On Noses2300WN WELD ON NOSE H&L style weld on nose for a 230 series; Use Item # 230WN 3.13230WN WELD ON NOSE H&L style weld on nose for a 230 series 3.13

Hendrix Style PartsHendrix Style Adapters

220B WELD ON ADAPTERHendrix style weld on, excavator adapter with a 1 1/4" lip thickness for a 214 series bucket tooth that takes a 4EP flex pin 25.00

220BL LH ADAPTERHendrix style weld on LH excavator adapter with a 1 1/4" lip thickness for a 214 series bucket tooth that takes a 4EP flex pin 18.39

220BR RH ADAPTERHendrix style weld on RH excavator adapter with a 1 1/4" lip thickness for a 214 series bucket tooth that takes a 4EP flex pin 18.39

320B WELD ON ADAPTERHendrix style weld on, excavator adapter with a 1 1/2" lip thickness for a 314 series bucket tooth that takes a 4EP flex pin 27.34

420B WELD ON ADAPTERHendrix style weld on, excavator adapter with a 2" lip thickness for a 414 series bucket tooth that takes a 4EP flex pin 37.48

Hendrix Style Pins

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)4EP FLEX PIN Hendrix style flex pin 0.70Hendrix Style Teeth214F FLARE TOOTH Hendrix style flare bucket tooth for a 214 series, takes a 4EP flex pin 15.00214P DIRT TOOTH Hendrix style standard dirt bucket tooth, takes a 4EP flex pin 12.70214T TIGER TOOTH Hendrix style tiger bucket tooth, takes a 4EP flex pin 12.83214WT TWIN TIGER TOOTH Hendrix style twin tiger bucket tooth for a 214 series, takes a 4EP flex pin314P DIRT TOOTH Hendrix style standard dirt bucket tooth, takes a 4EP flex pin 14.44314F FLARE TOOTH Hendrix style flare bucket tooth for a 314 series, takes a 4EP flex pin 21.60314T TIGER TOOTH Hendrix style tiger bucket tooth, takes a 4EP flex pin 13.563743 TIGER TOOTH Hendrix style tiger bucket tooth, takes a 4EP flex pin; Use Item # 314T 13.56414F FLARE TOOTH Hendrix style flare bucket tooth for a 414 series, takes a 4EP flex pin 29.00414P DIRT TOOTH Hendrix style standard dirt bucket tooth, takes a 4EP flex pin 18.63414T TIGER TOOTH Hendrix style tiger bucket tooth for a 414 series, takes a 4EP flex pin414WT TWIN TIGER TOOTH Hendrix style twin tiger bucket tooth for a 414 series, takes a 4EP flex pin

Hensley Style PartsHensley Style 5 PacksX156 (5PK) 5 PACKS - DIRT Hensley style X156 5 Pack, includes 5 - X156 dirt bucket teeth and 5 - P156 roll pins 6.20X156F (5PK) 5 PACKS - FLARE Hensley style X156F 5 Pack, includes 5 - X156F flare bucket teeth and 5 - P156 roll pins 14.55X156L (5PK) 5 PACKS - DIRT Hensley style X156L 5 Pack, includes 5 - X156L long dirt bucket teeth and 5 - P156 roll pins 9.55

X156LP (5PK) 5 PACKS - HD DIRTHensley style X156LP 5 Pack, includes 5 - X156LP heavy duty dirt bucket teeth and 5 - P156 roll pins 15.40

X156T (5PK) 5 PACKS - TIGER Hensley style X156T 5 Pack, includes 5 - X156T tiger bucket teeth and 5 - P156 roll pins 13.05

X156WT-X156T(5PK) 5 PACKS - TWIN TIGER/TIGERHensley style 5 pack, 2 of X156WT twin tiger bucket teeth, 3 of X156T tiger bucket teeth and 5 - P156 roll pins 13.21

X156WT(5PK) 5 PACKS - TWIN TIGER Hensley style X156WT 5 Pack, includes 5 - X156WT twin tiger bucket teeth and 5 - P156 roll pins 16.90X160 (5PK) 5 PACKS - DIRT Hensley style X160 5 Pack, includes 5 - X160 dirt bucket teeth and 5 - P160 roll pins 31.80X220 (5PK) 5 PACKS - DIRT Hensley style X220 5 Pack, includes 5 - X220 dirt bucket teeth and 5 - P160 roll pins 34.75

X220WT-X220T (5PK) 5 PACKS - TWIN TIGER/TIGERHensley style 5 pack, 2 of X220WT twin tiger bucket teeth, 3 of X220T tiger bucket teeth and 5 - P160 roll pins 38.26

X290WT-X290T(5PK) 5 PACKS - TWIN TIGER/TIGERHensley style 5 pack, 2 of X290WT twin tiger bucket teeth, 3 of X290T tiger bucket teeth and 5 - P290 flex pins 45.53

X330WT-X330T (5PK) 5 PACKS - TWIN TIGER/TIGERHensley style 5 pack, 2 of X330WT twin tiger bucket teeth, 3 of X330T tiger bucket teeth and 5 - P330 flex pins 67.00

X400WT-X400T (5PK) 5 PACKS - TWIN TIGER/TIGERHensley style 5 pack, 2 of X400WT twin tiger bucket teeth, 3 of X400T tiger bucket teeth and 5 - P400HD flex pins 95.14

Hensley Style Adapters

109x220 WELD ON ADAPTERHensley style weld on adapter for a 220 series bucket tooth with a 1 1/4" lip thickness; Use Item # X109-220 14.10



158x290 WELD ON ADAPTERHensley style weld on adapter for a 290 series bucket tooth with a 1 1/2" lip thickness, takes a P290 flex pin; Use Item # X158-290 22.16


190x290 BOLT ON ADAPTERHensley style bolt on adapter for a 290 series bucket tooth with a 1 1/4" lip thickness; Use Item # X190-290 20.90

191x290 BOLT ON ADAPTERHensley style bolt on, corner adapter for a 290 series bucket tooth with a 1 1/4" lip thickness; Use Item # X191-290 26.95

230x156 WELD ON ADAPTERHensley style weld on adapter for a 156 series bucket tooth with a 5/8" lip thickness; Use Item # X230-156 3.81

3000W25HX WELD ON ADAPTERH&L style wrap around, weld on adapter with a 1 1/4" lip thickness for a 250 series bucket tooth, takes a 25FP flex pin; Use Item # 2740W25 7.12

550x156 WELD ON ADAPTERHensley style weld on adapter for a 156 series bucket tooth with a 1" lip thickness; Use Item # X550-156 4.40

552x156 WELD ON ADAPTERHensley style weld on adpater for a 156 series bucket tooth with a 3/4" lip thickness; Use Item # X552-156 5.68

621x220 BOLT ON ADAPTERHensley style bolt on, center adapter for a 220 series bucket tooth with a 1 1/8" lip thickness; Use Item # X621-220 18.15

622x220 BOLT ON ADAPTERHensley style bolt on, corner adapter for a 220 series bucket tooth with a 1 1/8" lip thickness; Use Item # X622-220 25.30

802x400 WELD ON ADAPTERHensley style weld on adpater for a 400 series bucket tooth with a 2" lip thickness; Use Item # X802-400 45.08

834x156 WELD ON ADAPTERHensley style weld on adapter for a 156 series bucket tooth with a 3/4" - 1" lip thickness; Use Item # X834-156 4.40

835x156 WELD ON ADAPTERHensley style weld on adapter for a 156 series bucket tooth with a 5/8" - 7/8" lip thickness; Use Item # X835-156 3.41

837x156 WELD ON ADAPTER Hensley style weld on adapter for a 156 series bucket tooth; Use Item # X837-156 3.56

860x220 BOLT ON ADAPTERHensley style bolt on, John Deere scraper adapter for a 220 series bucket tooth; Use Item # X860-220 16.50



938x400 WELD ON ADAPTERHensley style weld on adapter for a 400 series bucket tooth with a 2" lip thickness; Use Item #X802-400 45.08

940x370 WELD ON ADAPTERHensley style weld on adapter for a 370 series bucket tooth with a 2" lip thickness; Use Item # X940-370 33.50


940x410 WELD ON ADAPTERHensley style SBIC weld on adapter for a 410 series bucket tooth with a 2" lip thickness; Use Item # X940-410 47.61

EMS001 ADAPTER Hensley style adapter, fits with an EMT002 bucket tooth 30.64TB-1001-156 TOOTH BAR ADAPTER Hensley style tooth bar adapter for a 156 series bucket tooth, takes a P156 roll pin 4.40X103-220 WELD ON ADAPTER Hensley style weld on adapter for a 220 series with a 1" lip thickness 15.90X109-220 WELD ON ADAPTER Hensley style weld on adapter for a 220 series bucket tooth with a 1 1/4" lip thickness 14.10X109-220-SB WELD ON ADAPTER Hensley style SBIC weld on adapter for a 220 series bucket tooth with a 1 1/4" lip thickness 16.09X127-290 WELD ON ADAPTER Hensley style weld on adapter for a 290 series bucket tooth with a 1 1/4" lip thickness 20.94X127-290-SB WELD ON ADAPTER Hensley style SBIC weld on adapter for a 290 series bucket tooth with a 1 1/4" lip thickness 22.00X153-310 WELD ON ADAPTER Hensley style weld on adapter for a 310 series bucket tooth with a 1 1/2" lip thickness 21.27X153-310-SB WELD ON ADAPTER Hensley style SBIC weld on adapter for a 310 series bucket tooth with a 1 1/2" lip thickness 20.90

X156-23 BOLT ON ADAPTERHensley style bolt on adapter for a 230 series bucket tooth; distance between bolt holes is 3" center to center 4.60

X156-50 BOLT ON ADAPTERHensley style bolt on adapter with a .65" lip thickness for a 156 series bucket tooth; takes 2 - 1/2" x 2" CS cap screws and 2 - 1/2" CS nuts 4.17

X156-5023 BOLT ON ADAPTERHensley style bolt on adapter for a 230 series bucket tooth; takes 2 of a 1/2" x 2" cs cap screw and 2 of a 1/2" cs nut 3.78

X156FL BOLT ON ADAPTER Hensley style flush mount, bolt on adapter with a 3/4" lip thickness for a 156 series bucket tooth 4.85

X158-290 WELD ON ADAPTERHensley style weld on adapter for a 290 series bucket tooth with a 1 1/2" lip thickness, takes a P290 flex pin 22.16

X158-290-SB WELD ON ADAPTERHensley style SBIC weld on adapter for an X290 series bucket tooth with a 1 1/2" lip thickness, takes a P290 flex pin 21.40

X158-295 WELD ON ADAPTER Hensley style weld on adapter for a 295 series bucket tooth takes a P295 flex pin 21.98X158-330 WELD ON ADAPTER Hensley style weld on adapter for a 330 series bucket tooth with a 1 1/2" lip thickness 36.33X190-290 BOLT ON ADAPTER Hensley style bolt on adapter for a 290 series bucket tooth with a 1 1/4" lip thickness 20.90X191-290 BOLT ON ADAPTER Hensley style bolt on, corner adapter for a 290 series bucket tooth with a 1 1/4" lip thickness 26.95x230-156 WELD ON ADAPTER Hensley style weld on adapter for a 156 series bucket tooth with a 5/8" lip thickness 3.81X310-160 ADAPTER Hensley style adapter for an X160 series bucket tooth, takes a P160 roll pin 9.20x550-156 WELD ON ADAPTER Hensley style weld on adapter for a 156 series bucket tooth with a 1" lip thickness 4.40X552-156 WELD ON ADAPTER Hensley style weld on adpater for a 156 series bucket tooth with a 3/4" lip thickness 5.68X621-220 BOLT ON ADAPTER Hensley style bolt on, center adapter for a 220 series bucket tooth with a 1 1/8" lip thickness 18.15X622-220 BOLT ON ADAPTER Hensley style bolt on, corner adapter for a 220 series bucket tooth with a 1 1/8" lip thickness 25.30X802-400 WELD ON ADAPTER Hensley style weld on adpater for a 400 series bucket tooth with a 2" lip thickness 45.08X802-400-SB WELD ON ADAPTER Hensley style SBIC weld on adapter for a 400 series bucket tooth with a 2" lip thickness 49.98X834-156 WELD ON ADAPTER Hensley style weld on adapter for a 156 series bucket tooth with a 3/4" - 1" lip thickness 4.40X835-156 WELD ON ADAPTER Hensley style weld on adapter for a 156 series bucket tooth with a 5/8" - 7/8" lip thickness 3.41X837-156 WELD ON ADAPTER Hensley style weld on adapter for a 156 series bucket tooth 3.56X850-160 WELD ON ADAPTER Hensley style weld on adapter for a 160 series, with a 1.25" lip thickness, takes a P160 roll pinX860-220 WELD ON ADAPTER Hensley style weld on, John Deere scraper adapter for a 220 series bucket tooth 16.50X937-330 WELD ON ADAPTER Hensley style weld on adapter for a 330 series bucket tooth with a 1 3/4" lip thickness 33.28X937-370 WELD ON ADAPTER Hensley style weld on adapter for a 370 series bucket tooth with a 1 3/4" lip thickness 32.96

X938-400 WELD ON ADAPTERHensley style weld on adapter for a 400 series bucket tooth with a 2" lip thickness; Use Item #X802-400 45.08

X940-370 WELD ON ADAPTER Hensley style weld on adapter for a 370 series bucket tooth with a 2" lip thickness 33.50X940-410 WELD ON ADAPTER Hensley style weld on adapter for a 410 series bucket tooth with a 2" lip thickness 47.61Hensley Style Assemblies

85003 WELD ON ASSEMBLYHensley style weld on assembly, takes an X156 dirt bucket tooth, an X230-156 weld on adapter and a P156 roll pin 5.05

RK220 1 1/4" STANDARD ASSEMBLYHensley style standard assembly for a 1 1/4" lip thickness, takes an X109-220 weld on adapter, an X220 dirt bucket tooth and a P160 roll pin 17.64

RK220CSL 1" STANDARD ASSEMBLY

Hensley style standard assembly for a 1" lip thickness, takes an X621-220 center adapter, an X220 dirt bucket tooth and a P160 roll pin; the adapter takes 2 - 750 x 300 plow bolts and 2 - 750 hex nuts 24.10

RK220CSL R/L 1" STANDARD ASSEMBLY

Hensley style standard assembly for a 1" lip thickness, takes an X622-220 corner adapter, an X220 dirt bucket tooth and a P160 roll pin; the adapter takes 2 - 750 x 300 plow bolts and 2 - 750 hex nuts 31.25

RK220T 1 1/4" TIGER ASSEMBLYHensley style tiger bucket tooth assembly for a 1 1/4" lip thickness, takes an X109-220 weld on adapter, an X220T tiger bucket tooth and a P160 roll pin 17.64

RK220WT 1 1/4" TWIN TIGER ASSEMBLYHensley style twin tiger bucket tooth assembly for a 1 1/4" lip thickness, takes an X109-220 weld on adapter, an X220WT twin tiger bucket tooth and a P160 roll pin 19.03

RK290 1 1/2" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 1 1/2" lip thickness, takes an X158-290 weld on adapter, an X290 standard dirt bucket tooth and a P290 flex pin 30.54

RK290-1 1/4 1 1/4" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 1 1/4" lip thickness, takes an X127-290 weld on adapter, an X290 standard dirt bucket tooth and a P290 flex pin 28.99

RK290JDL 1 1/4" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 1 1/4" lip thickness, takes an X190-290 bolt on adapter, an X290 standard dirt bucket tooth and a P290 flex pin 28.94

RK290JDLC 1 1/4" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 1 1/4" lip thickness, takes an X191-290 bolt on corner adapter, an X290 standard dirt bucket tooth and a P290 flex pin 34.99

RK290T 1 1/2" TIGER ASSEMBLYHensley style tiger bucket tooth assembly for a 1 1/2" lip thickness, takes an X158-290 weld on adapter, an X290T tiger bucket tooth and a P290 flex pin 30.87

RK290T-1 1/4 1 1/4" TIGER ASSEMBLYHensley style tiger bucket tooth assembly for a 1 1/4" lip thickness, takes an X127-290 weld on adapter, an X290T tiger bucket tooth and a P290 flex pin 29.32

RK290WT 1 1/2" TWIN TIGER ASSEMBLYHensley style twin tiger bucket tooth assembly for a 1 1/2" lip thickness, takes an X158-290 weld on adapter, an X290WT twin tiger bucket tooth and a P290 flex pin 32.96

RK290WT-1 1/4 1 1/4" TWIN TIGER ASSEMBLYHensley style twin tiger bucket tooth assembly for a 1 1/4" lip thickness, takes an X127-290 weld on adapter, an X290WT twin tiger bucket tooth and a P290 flex pin 31.41

RK330 1 1/2" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 1 1/2" lip thickness, takes an X158-330 weld on adapter, an X330 standard dirt bucket tooth and a P330 flex pin 49.83

RK330-1 3/4 1 3/4" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 1 3/4" lip thickness, takes an X937-330 weld on adapter, an X330 standard dirt bucket tooth and a P330 flex pin 46.46

RK330T 1 1/2" TIGER ASSEMBLYHensley style tiger bucket tooth assembly for a 1 1/2" lip thickness, takes an X158-330 weld on adapter, an X330T tiger bucket tooth and a P330 flex pin 49.83


RK330T-1 3/4 1 3/4" TIGER ASSEMBLYHensley style tiger bucket tooth assembly for a 1 3/4" lip thickness, takes an X937-330 weld on adapter, an X330T tiger bucket tooth and a P330 flex pin 46.46

RK330WT 1 1/2" TWIN TIGER ASSEMBLYHensley style twin tiger bucket tooth assembly for a 1 1/2" lip thickness, takes an X158-330 weld on adapter, an X330WT twin tiger bucket tooth and a P330 flex pin 52.14

RK330WT-1 3/4 1 3/4" TWIN TIGER ASSEMBLYHensley style twin tiger bucket tooth assembly for a 1 3/4" lip thickness, takes an X937-330 weld on adapter, an X330WT twin tiger bucket tooth and a P330 flex pin 48.77

RK370 1 3/4" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 1 3/4" lip thickness, takes an X937-370 weld on adapter, an X370 standard dirt bucket tooth and an ROP3700 flex pin 58.41

RK370-2 2" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 2" lip thickness, takes an X940-370 weld on adapter, an X370 standard dirt bucket tooth and an ROP3700 flex pin 61.35

RK370T 1 3/4" TIGER ASSEMBLYHensley style tiger bucket tooth assembly for a 1 3/4" lip thickness, takes an X937-370 weld on adapter, an X370T tiger bucket tooth and an ROP3700 flex pin 55.38

RK370T-2 2" TIGER ASSEMBLYHensley style tiger bucket tooth assembly for a 2" lip thickness, takes an X940-370 weld on adapter, an X370T tiger bucket tooth and an ROP3700 flex pin 58.33

RK370WT 1 3/4" TWIN TIGER ASSEMBLYHensley style twin tiger bucket tooth assembly for a 1 3/4" lip thickness, takes an X937-370 weld on adapter, an X370WT twin tiger bucket tooth and an ROP3700 flex pin 58.60

RK370WT-2 2" TWIN TIGER ASSEMBLYHensley style twin tiger bucket tooth assembly for a 2" lip thickness, takes an X940-370 weld on adapter, an X370WT twin tiger bucket tooth and an ROP3700 flex pin 61.55

RK400 2" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 2" lip thickness, takes an X802-400 weld on adapter, an X400 standard dirt bucket tooth and a P400HD flex pin 62.34

RK410 2" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 2" lip thickness, takes an X940-410 weld on adapter, an X410 standard bucket tooth and an ROP4100 flex pin 66.03

X156-50 ASSY BOLT ON ASSEMBLYHensley style standard bucket tooth excavator assembly, takes an X156 standard dirt bucket tooth, an X156-50 bolt on adapter and a P156 roll pin 5.41

X156L FLUSH ASSY FLUSH MOUNT ASSEMBLYHensley style long bucket tooth skid steer assembly, takes an X156L long bucket tooth, an X156FL flush mount adapter and a P156 roll pin 7.20

X156L-50 ASSY BOLT ON ASSEMBLYHensley style long bucket tooth excavator assembly, takes an X156L long bucket tooth, an X156-50 bolt on adapter and a P156 roll pin 6.08

X156L-550 ASSY WELD ON ASSEMBLYHensley style long bucket tooth assembly, takes an X156L long bucket tooth, an X550-156 weld on adapter and a P156 roll pin 6.31

X156LP ASSY BOLT ON ASSEMBLYHensley style heavy duty bucket tooth excavator assembly; takes an X156LP heavy duty bucket tooth, an X156FL bolt on adapter, and a P156 roll pin 7.93

Hensley Style Heel ShroudsES6697-2 HEEL SHROUD Hensley style bolt on heel plate. 43.40ES6697-3 HEEL SHROUD Hensley style heel shroud 29.76Hensley Style Lip Shrouds10WS LIP SHROUD Hensley style lip shroud 23.5913WS LIP SHROUD Hensley style lip shroud 47.4018WS LIP SHROUD Hensley style lip shroud 79.37WS80 LIP SHROUD Hensley style lip shroud 37.92Hensley Style KitsRK156 STANDARD 5/8" lip, X156 tooth, 230X156 adapterRK1561 STANDARD 1" lip, X156 tooth, 550X156 adapterRK156F FLARE 1" lip, 156F tooth, 500X156 adapterRK156TC TIGER 1" lip, 156T tooth, 550X156 adapterRK156WTC TWIN TIGER 1" lip, 156WT tooth, 550X156 adapterX156L KT 156L TOOTH KIT X156L Kit 10.00Hensley Style Pins29SPS SPOOL Esco style spool, takes a 29W1W wedge 1.102K2901 STEEL PIN Hensley style steel pin for a 290 series bucket tooth 0.332K3301 STEEL PIN Hensley style steel pin for a 330 series bucket tooth 0.662K3701 STEEL PIN Hensley style steel pin for a 370 series bucket tooth 0.732K4101 STEEL PIN Hensley style steel pin for a 410 series bucket tooth 0.822K4501 STEEL PIN Hensley style steel pin for a 450 series bucket tooth 1.612K5001 STEEL PIN Hensley style steel pin for a 500 series bucket tooth 2.432K5501 STEEL PIN Hensley style steel pin for a 550 series bucket tooth 2.21EMP003 PIN Hensley style pin for a vertical schroud protector, takes an EMI004 plug 0.50K290 STEEL PIN Hensley style steel pin for a 290 series bucket tooth; Use Item # 2K2901 0.33K290S STEEL PIN Hensley style steel pin for a 290 series bucket tooth; Use Item # 2K2901 0.33K330 STEEL PIN Hensley style steel pin for a 330 series bucket tooth; Use Item # 2K3301 0.66K330S STEEL PIN Hensley style steel pin for a 330 series bucket tooth; Use Item # 2K3301 0.66K370 STEEL PIN Hensley style steel pin for a 370 series bucket tooth; Use Item # 2K3701 0.73K370S STEEL PIN Hensley style steel pin for a 370 series bucket tooth; Use Item # 2K3701 0.73K410 STEEL PIN Hensley style steel pin for a 410 series bucket tooth; Use Item # 2K4101 0.82K410S STEEL PIN Hensley style steel pin for a 410 series bucket tooth; Use Item # 2K4101 0.82K450 STEEL PIN Hensley style steel pin for a 450 series bucket tooth; Use Item # 2K4501 1.61K450S STEEL PIN Hensley style steel pin for a 450 series bucket tooth; Use Item # 2K4501 1.61K500 STEEL PIN Hensley style steel pin for a 500 series bucket tooth; Use Item # 2K5001 2.43K500R STEEL PIN Hensley style steel pin for a 500 series bucket tooth, Use Item # 2K5001 2.43K500S STEEL PIN Hensley style steel pin for a 500 series bucket tooth; Use Item # 2K5001 2.43K550 STEEL PIN Hensley style steel pin for a 550 series bucket tooth; Use Item # 2K5501 2.21K550S STEEL PIN Hensley style steel pin for a 550 series bucket tooth; Use Item # 2K5501 2.21

P156 ROLL PIN Hensley style roll pin for a 156 series bucket tooth, this pin is 2" long and has a .375" pin diameter 0.04P160 ROLL PIN Hensley style roll pin for a 160 series bucket tooth; the pin is 3" long with a 1/2" pin diameter 0.12P162 PIN Hensley style flex pin for a 162 series bucket tooth 0.20P225 PIN Hensley style flex pin for a 200 series bucket tooth 0.50P235 PIN Hensley style pin, takes a 3G9549 retainer 0.60P236 PIN Hensley style flex pin 1.00P290 PIN Hensley style flex pin for a 290 series bucket tooth 0.22P2900 PIN Hensley style flex pin for a 290 series bucket tooth 0.10

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)P295 PIN Hensley style pin for a 295 series bucket tooth 0.44P300 PIN H&L style flex pin for a 27 series bucket tooth; Use Item #27FP 0.20P330 FLEX PIN Hensley style flex pin for a 330 series bucket tooth 0.44P335 PIN Hensley style pin for a 335 series bucket tooth 0.60P350/400 PIN Hensley style flex pin for a 350 / 400 series bucket tooth 0.44P370 PIN Hensley style flex pin for a 370 series bucket tooth; Use Item #ROP3700 0.90P370STP PIN Hensley style flex pin for a 370 series bucket tooth 0.99P385 PIN Hensley style pin; Use Item #4T2479 1.00P400HD PIN Hensley style HD flex pin for a 400 series bucket tooth 0.51P400SA SPOOL Hensley style spool for a 400 series bucket tooth 0.30P400SB WEDGE Hensley style wedge for a 400 series bucket tooth 0.24P410 PIN Hensley style flex pin for a 410 series bucket tooth; Use Item #ROP4100 1.00P410STP PIN Hensley style flex pin for a 410 series bucket tooth 1.32P435 PIN Hensley style pin for a 435 series bucket tooth 1.80P450 PIN Hensley style flex pin for a 450 series bucket tooth 1.10P475HD PIN Hensley style heavy duty flex pin for a 475 series bucket tooth 1.00P485 PIN Hensley style pin for a 485 series bucket tooth 1.00P500 PIN Hensley style flex pin for a 500 series bucket tooth 1.20P550 PIN Hensley style flex pin for a 550 series bucket tooth 1.25ROP3700 PIN Hensley style flex pin for a 370 series bucket tooth 0.90ROP4100 PIN Hensley style flex pin for a 410 series bucket tooth; Use Item #P410 1.05VS272T PIN Hensley style pin for a VS500 vertical shroud protector, takes a VSR3 rubber bushing 0.50VSP2-SL VERTICAL SHROUD PIN Hensley style vertical shroud/protector pin, takes a VSR3-SL rubber bushing 1.00VSP3 PIN Hensley style vertical shroud/protector pin, takes a VSR3 rubber bushing 0.22VSP3-SL VERTICAL SHROUD PIN Hensley style vertical shroud/protector pin, takes a VSR3-SL rubber bushing 0.50VSP35L PIN Hensley style vertical shroud/protector pin, takes a VSR3 rubber bushing; Use Item # VSP3 0.22X702P PIN Hensley style flex pin for a 702 series bucket tooth 0.50Hensley Style ProtectorsVS385 PROTECTOR Hensley style vertical shroud/protector, takes 2 - EMP003 pins and 2 - EMI004 plugs 32.80VS410 PROTECTOR Hensley style vertical shroud/protector, takes 2 - EMP003 pins and 2 - EMI004 plugs 29.65VS450 PROTECTOR Hensley style vertical shroud/protector, takes 2 - EMP003 pins and 2 - EMI004 plugs 46.30VS500 PROTECTOR Hensley style vertical shroud/protector, takes a VSP3-SL pin and a VSR3-SL retainer 74.25

VS550VERTICAL SHROUDPROTECTOR Hensley style vertical shroud/protector, takes a VSP3-SL pin and a VSR3-SL retainer 77.16

Hensley Style Retainers29W1W WEDGE Esco style fluted wedge, takes a 29SPS spool 1.65EMI004 RUBBER BUSHING Hensley style rubber bushing for a vertical shroud protector, takes an EMP003 pin 0.20P235W WASHER Hensley style retainer, takes a P235 pin; Use Item # 3G9549 0.10VSR3 RUBBER BUSHING Hensley style rubber bushing for a vertical shroud protector, takes a VSP3 pin 0.44VSR3-SL RUBBER BUSHING Hensley style vertical shroud/protector rubber bushing, takes a VSP3-SL pin 0.50VSR35L RUBBER BUSHING Hensley style rubber bushing for a vertical shroud protector, takes a VSP3 pin; Use Item # VSR3 0.44Hensley Style Sidecutters120SCL LH SIDECUTTER Hitachi style left hand, 4 bolt, excavator sidecutter SX120SCL; Use Item # 2015428 22.93120SCR RH SIDECUTTER Hitachi style right hand, 4 bolt, excavator sidecutter SX120SCR; Use Item # 2015429 22.93200SCL LH SIDECUTTER Hitachi style left hand, 6 bolt, excavator sidecutter SX200SCL; Use Item # 2014503 30.42200SCR RH SIDECUTTER Hitachi style right hand, 6 bolt, excavator sidecutter SX200SCR; Use Item # 2014504 30.42

300SCL LH SIDECUTTERHitachi style left hand, 6 bolt, excavator sidecutter SX300SCL; takes 6 - 100X300 plow bolts and 6 - 100 hex nuts; Use Item # 2021232 40.70

300SCR RH SIDECUTTERHitachi style right hand, 6 bolt, excavator sidecutter SX300SCR; takes 6 - 100X300 plow bolts and 6 - 100 hex nuts; Use Item # 2021233 40.70

400SCL LH SIDECUTTER Hitachi style left hand, 5 bolt, excavator sidecutter SX400SCL; Use Item # 1010517 45.10400SCR RH SIDECUTTER Hitachi style right hand, 5 bolt, excavator sidecutter SX400SCR; Use Item # 1010518 42.90B102RH RH SIDECUTTER Hensley style right hand, 4 bolt sidecutter for an excavator 62.67B103LH LH SIDECUTTER Hensley style left hand, 4 bolt sidecutter for an excavator 62.68

B330RH RH SIDECUTTERHensley style right hand, 4 bolt sidecutter for an excavator, takes 4 - 100 X 300 plow bolts and 4 - 100 hex nuts 53.00

B331LH LH SIDECUTTERHensley style left hand, 4 bolt sidecutter for an excavator, takes 4 - 100 X 300 plow bolts and 4 - 100 hex nuts 53.00

Hensley Style Teeth25T TIGER TOOTH Hensley style tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item # 250T 6.193CHXL CRIMP ON TOOTH Hensley style heavy duty crimp on bucket tooth 2.203CT TIGER TOOTH Hensley style heavy duty, crimp on tiger bucket tooth 2.20EMT002 TOOTH Hensley style bucket tooth, fits on an EMS001 bucket adapter 9.70F15518 DIRT TOOTH Hensley style dirt bucket tooth for a 400 series, takes a P400HD flex pin; Use Item # X400 16.75T3C TIGER TOOTH Hensley style heavy duty, crimp on tiger bucket tooth; Use Item # 3CT 2.20X100C CENTER TOOTH Hensley style 100 series center bucket tooth, takes a P156 roll pin 3.09X100LH LH TOOTH Hensley style 100 series left hand bucket tooth, takes a P156 roll pin 2.87X100RH RH TOOTH Hensley style 100 series right hand bucket tooth, takes a P156 roll pin 2.93X156 DIRT TOOTH Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin 1.20X156F FLARE TOOTH Hensley style flare bucket tooth for a 156 series, takes a P156 roll pin 2.87X156L LONG TOOTH Hensley style long bucket tooth for a 156 series, takes a P156 roll pin 1.76X156LP HD TOOTH Hensley style heavy duty bucket tooth for a 156 series, takes a P156 roll pin 3.04X156T TIGER TOOTH Hensley style tiger bucket tooth for a 156 series, takes a P156 roll pin 2.57X156T-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 156 series, takes a P156 roll pin 1.98X156WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin 2.65X156WT-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 156 series, takes a P156 roll pin 3.50X160 DIRT TOOTH Hensley style dirt bucket tooth for a 160 series, takes a P160 roll pin 6.24X160ST STAR TOOTH Hensley style parabolic star bucket tooth for a 160 series, takes a P160 roll pin 4.41X160T TIGER TOOTH Hensley style tiger bucket tooth for a 160 series, takes a P160 roll pinX160WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 160 series, takes a P160 roll pinX162HD HD TOOTH Hensley style heavy duty bucket tooth for a 162 series, takes a P160 roll pin 4.74

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)X162WT TWIN TIGER TOOTH Hensley style parabolic twin tiger bucket tooth for a 162 series, takes a P160 roll pin 6.72X220 DIRT TOOTH Hensley style dirt bucket tooth for a 220 series, takes a P160 roll pin 6.61X220-SB DIRT TOOTH Hensley style SBIC dirt bucket tooth for a 220 series, takes a P160 roll pin 6.60X220DP ROCK TOOTH Hensley style rock bucket tooth for a 220 series, takes a P160 roll pin 6.82X220F FLARE TOOTH Hensley style flare bucket tooth for a 220 series, takes a P160 roll pin 7.87X220F-SB FLARE TOOTH Hensley style SBIC flare bucket tooth for a 220 series, takes a P160 roll pin 7.30X220T TIGER TOOTH Hensley style tiger bucket tooth for a 220 series, takes a P160 roll pin 6.02X220T-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 220 series, takes a P160 roll pin 6.20X220WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 220 series, takes a P160 roll pin 7.23X220WT-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 220 series, takes a P160 roll pin 8.60X225 DIRT TOOTH Hensley style dirt bucket tooth for a 225 series, takes a P225 flex pin 5.72X290 DIRT TOOTH Hensley style dirt bucket tooth for a 290 series, takes a P290 flex pin 7.94X290-SB DIRT TOOTH Hensley style SBIC dirt bucket tooth for a 290 series, takes a P290 flex pin 8.14X290AP HD TOOTH Hensley style all purpose heavy duty bucket tooth for a 290 series, takes a P290 flex pin 10.36X290F FLARE TOOTH Hensley style flare bucket tooth for a 290 series, takes a P290 flex pin 12.72X290F-SB FLARE TOOTH Hensley style SBIC flare bucket tooth for a 290 series, takes a P290 flex pin 12.50X290RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 290 series, takes a P290 flex pin 9.90X290RP2 ROCK PENETRATOR TOOTH 13.00X290T TIGER TOOTH Hensley style tiger bucket tooth for a 290 series, takes a P290 flex pin 8.05X290T-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 290 series, takes a P290 flex pin 7.70X290WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 290 series, takes a P290 flex pin 10.14X290WT-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 290 series, takes a P290 flex pin 10.12X295 STANDARD TOOTH Hensley style standard bucket tooth for a 295 series, takes a P295 spring clip pin 8.82X295-SB FLARE TOOTH Hensley style SBIC flare bucket tooth for a 295 series, takes a P295 spring clip pin 8.80X295AP ALL PURPOSE TOOTH Hensley style all purpose bucket tooth for a 295 series, takes a P295 spring clip pin 11.24X295F FLARE TOOTH Hensley style flare bucket tooth for a 295 series, takes a P295 spring clip pin 9.80X295RP2 ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth for a 295 series, takes a P295 spring clip pin 14.00X295T TIGER TOOTH Hensley style tiger bucket tooth for a 295 series, takes a P295 spring clip pin 8.64X295WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 295 series, takes a P295 spring clip pin 10.58X310 DIRT TOOTH Hensley style dirt bucket tooth for a 310 series, takes a P160 roll pin 9.68X310ABR ABRASION TOOTH Hensley style abrasion bucket tooth for a 310 series, takes a P160 roll pin 14.88X310AP ALL PURPOSE TOOTH Hensley style all purpose bucket tooth for a 310 series, takes a P160 roll pin 10.06X310F FLARE TOOTH Hensley style flare bucket tooth for a 310 series, takes a P160 roll pin 9.68X310F-SB FLARE TOOTH Hensley style SBIC flare bucket tooth for a 310 series, takes a P160 roll pin 9.60X310T TIGER TOOTH Hensley style tiger bucket tooth for a 310 series, takes a P160 roll pin 10.40X310T-SB ABRASION TOOTH Hensley style SBIC abrasion bucket tooth for a 310 series, takes a P160 roll pin 11.22X310WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 310 series, takes a P160 roll pin 9.33X310WT-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 310 series, takes a P160 roll pin 12.60X330 DIRT TOOTH Hensley style dirt bucket tooth for a 330 series, takes a P330 flex pin 12.57X330-SB DIRT TOOTH Hensley style SBIC dirt bucket tooth for a 330 series, takes a P330 flex pin 11.50X330ABR ABRASION TOOTH Hensley style parabolic heavy duty abrasion bucket tooth for a 330 series, takes a P330 flex pin 16.31X330AP ALL PURPOSE TOOTH Hensley style all purpose heavy duty bucket tooth for a 330 series, takes a P330 flex pin 16.09X330F FLARE TOOTH Hensley style flare bucket tooth for a 330 series, takes a P330 flex pin 18.52X330PT ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth for a 330 series, takes a P330 flex pin 20.46X330RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 330 series, takes a P330 flex pin 15.62X330RP2 ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth for a 330 series, takes a P330 flex pin 19.18X330T TIGER TOOTH Hensley style tiger bucket tooth for a 330 series, takes a P330 flex pin 11.68X330T-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 330 series, takes a P330 flex pin 11.20X330WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 330 series, takes a P330 flex pin 14.88X330WT-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 330 series, takes a P330 flex pin 14.56X335 DIRT TOOTH Hensley style dirt bucket tooth for a 335 series, takes a P335 spring clip pin 11.91X335F FLARE TOOTH Hensley style flare bucket tooth for a 335 series, takes a P335 spring clip pin 18.52X335RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 335 series, takes a P335 spring clip pin 16.75X335RP2 ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth for a 335 series, takes a P335 spring clip pin 19.18X335T TIGER TOOTH Hensley style tiger bucket tooth for a 335 series, takes a P335 spring clip pin 13.88X335WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 335 series, takes a P335 spring clip pin 13.67X350 DIRT TOOTH Hensley style bucket tooth for a 350 series, takes P350/P400 flex pins 16.00X370 DIRT TOOTH Hensley style dirt bucket tooth for a 370 series, takes a P370 flex pin 19.97X370-SB DIRT TOOTH Hensley style SBIC dirt bucket tooth for a 370 series, takes a P370 flex pin 17.80X370ABR ABRASION TOOTH Hensley style parabolic heavy duty abrasion bucket tooth for a 370 series, takes a P370 flex pin 26.61X370AP ALL PURPOSE TOOTH Hensley style all purpose bucket tooth for a 370 series, takes a P370 flex pin 21.76X370F FLARE TOOTH Hensley style flare bucket tooth for a 370 series, takes a P370 flex pin 23.15X370PT ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth for a 370 series, takes a P370 flex pin 28.22X370RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 370 series, takes a P370 flex pin 21.00X370T TIGER TOOTH Hensley style tiger bucket tooth for a 370 series, takes a P370 flex pin 16.95X370T-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 370 series, takes a P370 flex pin 18.15X370WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 370 series, takes a P370 flex pin 21.56X370WT-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 370 series, takes a P370 flex pin 21.00X385 DIRT TOOTH Hensley style dirt bucket tooth for a 385 series, takes a P385 spring clip pin 21.61X385F FLARE TOOTH Hensley style flare bucket tooth for a 385 series, takes a P385 spring clip pin 26.67X385RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 385 series, takes a P385 spring clip pin 26.67X385T TIGER TOOTH Hensley style tiger bucket tooth for a 385 series, takes a P385 spring clip pin 23.14X385WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 385 series, takes a P385 spring clip pin 25.35X400 DIRT TOOTH Hensley style dirt bucket tooth for a 400 series, takes a P400HD flex pin 16.75X400-SB DIRT TOOTH Hensley style SBIC dirt bucket tooth for a 400 series, takes a P400HD flex pin 17.05X400ABR ABRASION TOOTH Hensley style heavy duty abrasion bucket tooth for a 400 series, takes a P400HD flex pin 26.23X400F FLARE TOOTH Hensley style flare bucket tooth for a 400 series, takes a P400HD flex pin 21.94X400PT ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth for a 400 series, takes a P400HD flex pin 26.32X400RP2 ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth for a 400 series, takes a P400HD flex pin 36.71X400T TIGER TOOTH Hensley style tiger bucket tooth for a 400 series, takes a P400HD flex pin 15.43X400T-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 400 series, takes a P400HD flex pin 16.13X400WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 400 series, takes a P400HD flex pin 23.15

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)X400WT-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 400 series, takes a P400HD flex pin 23.65X410 DIRT TOOTH Hensley style dirt bucket tooth for a 410 series, takes a P410 flex pin 20.02X410-SB DIRT TOOTH Hensley style SBIC dirt bucket tooth for a 410 series, takes a P410 flex pin 21.45X410F FLARE TOOTH Hensley style flare bucket tooth for a 410 series, takes a P410 flex pin 34.61X410RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 410 series, takes a P410 flex pin 26.46X410T TIGER TOOTH Hensley style tiger bucket tooth for a 410 series, takes a P410 flex pin 22.70X410T-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 410 series, takes a P410 flex pin 22.60X410WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 410 series, takes a P410 flex pin 28.21X410WT-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 410 series, takes a P410 flex pin 27.60X435 DIRT TOOTH Hensley style dirt bucket tooth for a 435 series, takes a P435 spring clip pin 29.76X435RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 435 series, takes a P435 spring clip pin 37.47X435T TIGER TOOTH Hensley style tiger bucket tooth for a 435 series, takes a P435 spring clip pin 28.88X435WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 435 series, takes a P435 spring clip pin 34.02X450 DIRT TOOTH Hensley style dirt bucket tooth for a 450 series, takes a P450 flex pin 30.20X450-SB DIRT TOOTH Hensley style SBIC bucket tooth for a 450 series, takes a P450 flex pin 30.19X450AP ALL PURPOSE TOOTH Hensley style all purpose dirt bucket tooth for a 450 series, takes a P450 flex pin 38.60X450PT ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth, takes a P450 flex pin 45.18X450RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 450 series, takes a P450 flex pin 39.36X450RP2 ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth, takes a P450 flex pin 46.07X450T TIGER TOOTH Hensley style tiger bucket tooth for a 450 series, takes a P450 flex pin 29.70X450T-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 450 series, takes a P450 flex pin 31.30X450WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 450 series, takes a P450 flex pin 36.30X450WT-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 450 series, takes a P450 flex pin 37.50X475 DIRT TOOTH Hensley style dirt bucket tooth for a 475 series, takes a P475HD heavy duty flex pin 36.03X475-SB DIRT TOOTH Hensley style SBIC dirt bucket tooth for a 475 series, takes a P475HD heavy duty flex pin 35.80X475AP ALL PURPOSE TOOTH Hensley style all purpose bucket tooth for a 475 series, takes a P475HD flex pin 42.00X475F FLARE TOOTH Hensley style flare bucket tooth for a 475 series, takes a P475HD flex pinX475RP2 ROCK PENETRATION TOOTH Hensley style rock penetration bucket tooth for a 475 series, takes a P475HD flex pin 44.00X475TL TIGER TOOTH Hensley style tiger bucket tooth for a 475 series, takes a P475HD heavy duty flex pin 35.85X475TL-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 475 series, takes a P475HD heavy duty flex pin 33.39X475WTL TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 475 series, takes a P475HD heavy duty flex pin 42.26X475WTL-SB TWIN TIGER TOOTH Hensley style SBIC twin tiger bucket tooth for a 475 series, takes a P475HD heavy duty flex pin 37.30X485 DIRT TOOTH Hensley style dirt bucket tooth for a 485 series, takes a P485 flex pin 47.40X500 DIRT TOOTH Hensley style dirt bucket tooth for a 500 series, takes a P500 flex pin 42.10X500-SB DIRT TOOTH Hensley style SBIC dirt bucket tooth for a 500 series, takes a P500 flex pin 49.18X500AP ALL PURPOSE TOOTH Hensley style all purpose bucket tooth for a 500 series, takes a P500 flex pin 53.98X500RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 500 series, takes a P500 flex pin 57.10X500T TIGER TOOTH Hensley style tiger bucket tooth for a 500 series, takes a P500 flex pin 40.00X500T-SB TIGER TOOTH Hensley style SBIC tiger bucket tooth for a 500 series, takes a P500 flex pin 44.98X500WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 500 series, takes a P500 flex pin 45.00X550RC ROCK CHISEL TOOTH Hensley style rock chisel bucket tooth for a 550 series, takes a P550 flex pin 82.67X550RP2 ROCK PENETRATOR TOOTH Hensley style rock penetrator bucket tooth for a 550 series, takes a P550 flex pin 123.00X702TL RIPPER TOOTH Hensley style ripper tooth for a 702 series, takes an X702P flex pin 23.65Hensley Style Weld-On NosesC12WN NOSE PIECE Hensley style weld on nose for R300 series rippers 9.17X156WN NOSE PIECE Hensley style weld on nose for a 156 series 1.92X162WN NOSE PIECE Hensley style weld on nose for a 162 series 4.19X220WN NOSE PIECE Hensley style weld on nose for a 220 series, takes a P160 roll pin 5.51X295WN NOSE PIECE Hensley style weld on nose for a 295 series, takes a P295 pin 8.10X702WN NOSE PIECE Hensley style weld on nose for a 702 series 37.40Hensley Style WeldmentsVS410WNA WELDMENT Hensley style lower weldment, takes an EMP003 pin and an EMI004 rubber bushing 1.28VS410WNB WELDMENT Hensley style upper weldment, takes a EMP003 pin and an EMI004 rubber bushing 2.62VSM100 WELDMENT Hensley style 1" weldment, takes a EMP003 pin and an EMI004 rubber bushing 11.24VSM150 WELDMENT Hensley style 1 1/2" weldment, takes a EMP003 pin and an EMI004 rubber bushing 12.01VSM175 WELDMENT Hensley style 1 3/4" weldment, takes a EMP003 pin and an EMI004 rubber bushing 12.04VSM200 WELDMENT Hensley style 2" weldment, takes a EMP003 pin and an EMI004 rubber bushing 12.48VSM250 WELDMENT Hensley style 2" weldment, takes an EMP003 pin and an EMI004 rubber bushing 11.60

Hitachi Style PartsHitachi Style Adapters

X4245518 WELD ON ADAPTEREsco style weld-on adapter for an 18 series bucket tooth with a 3/4" lip thickness; Use Item # 1617-18 4.98

Hitachi Style Pins4135497 PIN Esco style pin for a 22 series, takes a 22LK lock; Use Item # 22PN 0.20X4080731 PIN Esco style pin, takes an 18-20LK lock; Use Item # 18-20PN 0.09X4501627 PIN Esco style pin for a 35 series bucket tooth, takes a 35-40LK lock; Use Item # 35PN 0.22X4512366 PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item # 40PN 0.57XZ963229 PIN Esco style pin for a 25 & 30 series bucket tooth, takes a 25-30LK lock; Use Item # 25-30PN 0.20Z968489 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item # 45PN 0.33Hitachi Style Retainers4135498 RUBBER LOCK Esco style rubber lock for a 22 series, takes a 22PN pin; Use Item # 22LK 0.05X4080732 RUBBER LOCK Esco style rubber lock, takes an 18-20PN pin; Use Item # 18-20LK 0.02X4501625 RUBBER LOCK Esco style rubber lock for a 35 & 40 series bucket tooth; Use Item # 35-40LK 0.11

XZ963227 RUBBER LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item # 25-30LK 0.02

Z968490 RUBBER LOCK Esco style rubber lock for a 45 series bucket tooth; Use Item # 45LK 0.11Hitachi Style Sidecutters1010517 LH SIDECUTTER Hitachi style left hand, 5 bolt, excavator sidecutter SX400SCL 45.101010518 RH SIDECUTTER Hitachi style right hand, 5 bolt, excavator sidecutter SX400SCR 42.90

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)2014503 LH SIDECUTTER Hitachi style left hand, 6 bolt, excavator sidecutter SX200SCL 30.422014504 RH SIDECUTTER Hitachi style right hand, 6 bolt, excavator sidecutter SX200SCR 30.422015428 LH SIDECUTTER Hitachi style left hand, 4 bolt, excavator sidecutter SX120SCL 22.932015429 RH SIDECUTTER Hitachi style right hand, 4 bolt, excavator sidecutter SX120SCR 22.93

2021232 LH SIDECUTTERHitachi style left hand, 6 bolt, excavator sidecutter SX300SCL; takes 6 - 100X300 plow bolts and 6 - 100 hex nuts 40.70

2021233 RH SIDECUTTERHitachi style right hand, 6 bolt, excavator sidecutter SX300SCR; takes 6 - 100X300 plow bolts and 6 - 100 hex nuts 40.70

120SCL LH SIDECUTTER Hitachi style left hand, 4 bolt, excavator sidecutter SX120SCL; Use Item # 2015428 22.93120SCR RH SIDECUTTER Hitachi style right hand, 4 bolt, excavator sidecutter SX120SCR; Use Item # 2015429 22.93200SCL LH SIDECUTTER Hitachi style left hand, 6 bolt, excavator sidecutter SX200SCL; Use Item # 2014503 30.42200SCR RH SIDECUTTER Hitachi style right hand, 6 bolt, excavator sidecutter SX200SCR; Use Item # 2014504 30.42

300SCL LH SIDECUTTERHitachi style left hand, 6 bolt, excavator sidecutter SX300SCL; takes 6 - 100X300 plow bolts and 6 - 100 hex nuts; Use Item # 2021232 40.70

300SCR RH SIDECUTTERHitachi style right hand, 6 bolt, excavator sidecutter SX300SCR; takes 6 - 100X300 plow bolts and 6 - 100 hex nuts; Use Item # 2021233 40.70

400SCL LH SIDECUTTER Hitachi style left hand, 5 bolt, excavator sidecutter SX400SCL; Use Item # 1010517 45.10400SCR RH SIDECUTTER Hitachi style right hand, 5 bolt, excavator sidecutter SX400SCR; Use Item # 1010518 42.90Hitachi Style Teeth

3056107 UNITOOTHKomatsu style unitooth with a .59" lip thickness and a 2.16" bolt hole spacing, center to center; takes 2 - 500x200 plow bolts and 2 - 500 hex nuts; Use Item # 107 3.40



X4080730 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; Use Item # 18TL 2.43

X4501626 DIRT TOOTHEsco style conical, standard, dirt bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock; Use Item # 35S 9.26

X4512365 DIRT TOOTHEsco style standard dirt bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock; Use Item # 40S 15.65

XZ963228 DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock; Use Item # 30S 5.95

Hyundai Style PartsHyundai Style Adapters61E7-0100 ADAPTER Hyundai style adapter 26.01

61E7-04600 WELD ON ADAPTERCaterpillar style heavy duty weld on adapter for a J450 series with a 2" lip thickness; Use Item # 8E6464 46.30

61N4-31200 WELD ON ADAPTERHyundai style weld on adapter with a 1.25" lip thickness, takes a 61N4-31210 series bucket tooth and a 66N4-30350 pin, and a 61E5-11150 retainer 13.23

E161-3017 WELD ON ADAPTERHyundai style weld on adapter with a 1 1/4" lip thickness; takes am E161-3027 dirt bucket tooth, a 9J2358 pin and a 3G9549 retainer 15.43

E262-3027 WELD ON ADAPTER Hyundai style weld on adapter 28.22Hyundai Style Pins61ECE-01320 PIN Esco style pin for a 25 & 30 series bucket tooth, takes a 25-30LK lock; Use Item # 25-30PN 0.2066N4-30350 PIN Hyundai style pin, takes a 61E5-11150 retainer 0.44952-40001 PIN Esco style pin, takes an 18-20LK lock; Use Item # 18-20PN 0.09E161-3035 PIN Hyundai style pin for a 61Q6-31310 style bucket tooth, takes a 61E5-11150 retainerE262-5004 PIN Hyundai style pin, takes a 3G9549 retainer; Use Item #P235 0.60P235 PIN Hensley style pin, takes a 3G9549 retainer 0.60Hyundai Style Retainers61E5-11150 RETAINER Hyundai style retainer for a 61Q6-31310 style bucket tooth, takes a E161-3035 pin

61ECE-01330 RUBBER LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item # 25-30LK 0.02

952-50001 RUBBER LOCK Esco style lock, takes an 18-20PN pin; Use Item # 18-20LK 0.02P235W WASHER Hyundai style washer, takes a P235 pin; Use Item #3G9549 0.10Hyundai Style Teeth

2713-1219TL TIGER TOOTHHyundai style tiger bucket tooth for a 2713 series, takes a 9J2358 pin and an 8E6359 sleeved retainer 17.00

2713-1219WTL TWIN TIGER TOOTHHyundai style twin tiger bucket tooth for a 2713 series, takes a 9J2358 pin and an 8E6359 sleeved retainer 18.50

2713-1269 DIRT TOOTH Daewoo style dirt bucket tooth for model #S220V; Use Item # 2713-1217 13.002713-1270 DIRT TOOTH Daewoo style dirt bucket tooth for model #S280V and #S290V; Use Item # 2713-1219 16.312713-9038TL TIGER TOOTH Hyundai style tiger bucket tooth for a 2713 series, takes a P235 pin and a 3G9549 retainer 17.202713-9038WTL TWIN TIGER TOOTH Hyundai style twin tiger bucket tooth for a 2713 series, takes a P235 pin and a 3G9549 retainer 18.70

61E04610 DIRT TOOTHCaterpillar style dirt bucket tooth for a J450 series, takes an 8E0486 pin and an 8E8469 sleeved retainer; Use Item # 9W8452 24.85

61E5-11150 RETAINER Hyundai style retainer takes a 66N4-30350 pin 0.4061E7-0101 DIRT TOOTH Hyundai style dirt bucket tooth, R420 model; takes an 8E0468 pin and an 8E0469 lock 26.01

61ECE-01300 DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock; Use Item # 25S 5.07

61EE-01300GG DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK rubber lock; Use Item #25S 5.07

61NA-31310F FLARE TOOTH Hyundai style Flare Tooth for a 61NA series; takes a 66N4-30350 pin and a 61E5-11150 retainer 32.50

61NA-31310GG DIRT TOOTHHyundai style dirt bucket tooth for a 61NA series, takes a 66N4-30350 pin and a 61E5-11150 retainer 30.86

61NA-31310TL TIGER TOOTHHyundai style tiger bucket tooth for a 61NA series, takes a 66N4-30350 pin and a 61E5-11150 retainer 31.80

61NA-31310WTL TWIN TIGER TOOTHHyundai style twin tiger bucket tooth for a 61NA series, takes a 66N4-30350 pin and a 61E5-11150 retainer 32.95

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)61N4-31210GG ROCK TOOTH Hyundai style rock bucket tooth, takes a 66N4-30350 pin and a 61E5-11150 retainer 9.9261N4-31210F FLARE TOOTH Hyundai style flare bucket tooth, takes a 66N4-30350 pin and a 61E5-11150 retainer 13.50

61N4-31210TL TIGER TOOTHHyundai style tiger bucket tooth for a 61N4 series, takes a 66N4-30350 pin and a 61E5-11150 retainer 10.20

61N4-31210WTL TWIN TIGER TOOTHHyundai style twin tiger bucket tooth for a 61N4 series, takes a 66N4-30350 pin and a 61E5-11150 retainer 11.50

61N8-31310F FLARE TOOTH Hyundai style Flare Tooth for a 61N8 series; takes a 66N4-30350 pin and a 61E5-11150 retainer 23.42

61N8-31310GG DIRT TOOTHHyundai style dirt bucket tooth for a 61N8 series, takes a 66N4-30350 pin and a 61E5-11150 retainer 22.27

61N8-31310TL TIGER TOOTHHyundai style tiger bucket tooth for a 61N8 series, takes a 66N4-30350 pin and a 61E5-11150 retainer 23.10

61N8-31310WTL TWIN TIGER TOOTHHyundai style twin tiger bucket tooth for a 61N8 series, takes a 66N4-30350 pin and a 61E5-11150 retainer 24.50

61Q6-31310GG ROCK TOOTH Hyundai style rock bucket tooth takes a E161-3035 pin and a 61E5-11150 retainer61Q6-31310GGF FLARE TOOTH Hyundai style flare bucket tooth takes a E161-3035 pin and a 61E5-11150 retainer61Q6-31310T TIGER TOOTH Esco style tiger bucket tooth, takes a E161-3035 pin and a 61E%-11150 retainer 21.0061Q6-31310WT TWIN TIGER TOOTH Esco style twin tiger bucket tooth, takes a E161-3035 pin and a 61E%-11150 retainer 23.00713-00025 DIRT TOOTH Daewoo style dirt bucket tooth for model #S220V; Use Item # 2713-1217 13.00713-00027 DIRT TOOTH Daewoo style dirt bucket tooth for model #S280V and #S290V; Use Item # 2713-1219 16.31

952-36001 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; Use Item # 18TL 2.43

E161-3027 DIRT TOOTH Hyundai style dirt bucket tooth, takes a 9J2358 pin and a 3G9549 retainer 11.02E161-3027-SB TOOTH Hyundai style SBIC bucket tooth, takes a 9J2358 pin and a 3G9549 retainer 11.10E161-3027RC ROCK CHISEL TOOTH Hyundai style rock chisel bucket tooth, takes a 9J2358 pin and a 3G9549 retainer 14.00E161-3027TL TIGER TOOTH Hyundai style tiger bucket tooth, takes a 9J2358 pin and a 3G9549 retainer 9.46E161-3027WTL TWIN TIGER TOOTH Hyundai style twin tiger bucket tooth, takes a 9J2358 pin and a 3G9549 retainer 9.35E262-3046 DIRT TOOTH Hyundai style dirt bucket tooth for a E262 series, takes a 9J2358 pin and a 3G9549 retainer 17.19E262-3046TL TIGER TOOTH Hyundai style tiger bucket tooth for a E262 series, takes a 9J2358 pin and a 3G9549 retainer 17.95

E262-3046WTL TWIN TIGER TOOTH Hyundai style twin tiger bucket tooth for a E262 series, takes a 9J2358 pin and a 3G9549 retainer 18.68E262-3146 TOOTH Hyundai style bucket tooth, takes a 9J2358 pin and a 3G9549 retainer 16.09

952-36001ABGG DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; Use Item #18TL 2.43

JCB Style PartsJCB Style Adapters

330/71191 SHORT LEG ADAPTERH&L style wrap around short leg adapter with a 3/4" lip thickness, takes a 230 series bucket tooth; Use Item # 2740W23 3.77

980/33602 WELD ON ADAPTER H&L style weld on adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item # 834-23 3.04JCB Style Cutting Edges

990/69901 CENTER EDGEJCB style bolt on center edge. This is a double beveled reversible center edge that is .75" thick, 8" wide and 95.985" in length. 150.10

993/99189 CENTER EDGEJCB style bolt on center cutting edge. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 92.52" in length. 142.00

JCB Style Pins

549/P156F ROLL PINHensley style roll pin for a 156 series bucket tooth, this pin is 2" long and has a .375" pin diameter; Use Item #P156 0.04

980/33603 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09JCB Style Sidecutters5310-3208 LH SIDECUTTER JCB style bolt-on, left hand sidecutter, takes 2 - 3/4" x 2 1/2" plow bolts and 2 - 3/4" hex nuts 12.265310-3209 RH SIDECUTTER JCB style bolt-on, right hand sidecutter, takes 2 - 3/4" x 2 1/2" plow bolts and 2 - 3/4" hex nuts 12.26JCB Style Teeth33071337 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.985310-3205 UNITOOTH JCB style bolt-on unitooth, takes 2 - 3/4" x 2 1/2" plow bolts and 2 - 3/4" hex nuts 5.45549/00037 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.20549/08002A DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.34549/AD156 DIRT TOOTH Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156 1.20549/AD156L LONG TOOTH Hensley style long dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156L 1.76549/AD156T TIGER TOOTH Hensley style tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156T 2.57549/AD156WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156WT 2.65980/33101 DIRT TOOTH H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98980/33601 DIRT TOOTH H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98

John Deere Style PartsJohn Deere Style 5 PacksTF23D 5 PACK 5 PACKS - DIRT John Deere style TF23D 5 Pack, includes 5 - TF23D dirt teeth and 5 - TF23 flex pins 19.40John Deere Style Adapters

AU13811 BOLT ON ADAPTERJohn Deere style bolt on adapter for a 1 1/4" lip thickness; takes a P160 roll pin; Use Item # U16864 10.67

T103190 CENTER ADAPTER John Deere style center loader adapter 23.60T103191 CORNER ADAPTER John Deere style corner loader adapter 23.60T103191-SB CORNER ADAPTER John Deere style SBIC corner adapter 23.60

T105692 ADAPTERJohn Deere style loader adapter; takes a T105690 dirt bucket tooth, a T112195 pin and a T112196 retainer 11.68

T105692-SB ADAPTERJohn Deere style adapter; takes a T105690 dirt bucket tooth, a T112195 pin and a T112196 retainer 10.80

T112163 CORNER ADAPTERJohn Deere style bolt on, corner loader for a 3/4" lip thickness; takes a T112195 pin and a T112196 retainer 13.67


T112164 CENTER ADAPTERJohn Deere style bolt on, center loader adapter for a 3/4" lip thickness; takes a T112195 pin and a T112196 retainer 9.26

T221X230 BOLT ON ADAPTERJohn Deere style bolt on adapter for a 230 series bucket tooth, takes a 23FP flex pin; Use Item #L3445-23 6.38

T25CA BOLT ON ADAPTER

John Deere style bolt on adapter with a 1" lip thickness, the bolt hole spacing is 3.5" from center to center of the bolt holes, this adapter takes a 1U3252 bucket tooth, a 9J2258 pin and an 8E6259 sleeved retainer

T25EA BOLT ON ADAPTERJohn Deere style bolt on adapter with a 1" lip thickness, this adapter takes a 1U3252 bucket tooth, a 9J2258 pin and an 8E6259 sleeved retainer

T30CA BOLT ON ADAPTER

John Deere style bolt on adapter with a 1.25" lip thickness, the bolt hole spacing is 4.875" from center to center of the bolt holes, this adapter takes a 1U3302 bucket tooth, a 9J2308 pin and an 8E6259 sleeved retainer

T30EA BOLT ON ADAPTERJohn Deere style bolt on adapter with a 1.25" lip thickness, this adapter takes a 1U3302 bucket tooth, a 9J2308 pin and an 8E6259 sleeved retainer

T36126 WELDON ADAPTER H&L style weld on adapter for a 230 series with a 3/4" lip thickness; Use Item #2740MW23 4.30

T40CA BOLT ON ADAPTERJohn Deere style bolt on adapter with a 1.5" lip thickness, this adapter takes a 7T3402 bucket tooth, a 7T3408 pin and an 8E8409 sleeved retainer

T40EA BOLT ON ADAPTERJohn Deere style bolt on adapter with a 2" lip thickness, this adapter takes a 7T3402 bucket tooth, a 7T3408 pin and an 8E8409 sleeved retainer

T427X240 WELD ON ADAPTERH&L style wrap around, weld on adapter with a 1 1/4" lip thickness for a 240 series bucket tooth, takes a 24FP flex pin; Use Item # 2740W24 4.76

T440X252 WELD ON ADAPTERH&L style wrap around, weld on adapter with a 1 1/4" lip thickness for a 250 series bucket tooth, takes a 25FP flex pin; Use Item # 2740W25 7.12

T716X2A WELD ON ADAPTER H&L style adapter with a .63" to .88" lip thickness for a 2A bucket tooth; Use Item # 835-2A 1.50

T716X3C WELD ON ADAPTERH&L style weld on adapter with a .63" to .75" lip thickness for a 3C bucket tooth; Use Item # 834-3C 2.68

T728X230 WELD ON ADAPTER H&L style weld on adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item # 834-23 3.04

U-10432 WELD ON ADAPTERH&L style weld-on, excavator adapter for a 230 series bucket tooth with a 1" lip thickness; Use Item #834-23 3.04

U-10580-U WELD ON ADAPTERH&L style weld- on, excavator adapter for a 2A bucket tooth with a .63" to .88" lip thickness; Use Item #835-2A 1.50

U-13928-U WELD ON ADAPTERH&L style weld-on, excavator adapter for a 230 series bucket tooth with a 1" lip thickness; Use Item #834-23 3.04

U-14436-U WELD ON ADAPTERH&L style weld-on, excavator adapter with a .63" to .75" lip thickness for a 3C bucket tooth; Use Item #834-3C 2.68

U14436 WELD ON ADAPTERH&L style weld on adapter with a .63" to .75" lip thickness for a 3C bucket tooth; Use Item # 834-3C 2.68

U16864 BOLT ON ADAPTERJohn Deere style bolt on adapter for a 1 1/4" lip thickness; takes a P160 roll pin; the front bolt hole takes a 625 hex nut, the back bolt hole takes a 625 x 300 plow bolt and a 625 hex nut 10.67

U41344 BOLT ON ADAPTER John Deere style bolt on adapter 5.62

U42750 WELD ON ADAPTERH&L style weld on, wrap around adapter for a 230 series with a 1" lip thickness; Use Item #2740AW23 3.53

U43792 WELD ON ADAPTERJohn Deere style weld on, wrap around, short leg adapter with a 1" lip thickness for a 230 series bucket tooth 1.87

John Deere Style Assemblies

RK290JDL 1 1/4" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 1 1/4" lip thickness, takes an X190-290 bolt on adapter, an X290 standard dirt bucket tooth and a P290 flex pin 28.94

RK290JDLC 1 1/4" STANDARD ASSEMBLYHensley style standard bucket tooth assembly for a 1 1/4" lip thickness, takes an X191-290 bolt on corner adapter, an X290 standard dirt bucket tooth and a P290 flex pin 34.99

John Deere Style Base Edges

U16966 BASE EDGE

John Deere style bolt base edge for a 455 John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is .875” thick, 6” wide and 80.984” in length. It takes 7 of a 5/8” X 2 1/4” (625X225) plow bolt and 7 of a 5/8” (625 HEX NUT) hex nut. 109.00

John Deere Style Cutting Edges

AT139622 END EDGEJohn Deere style bolt on end cutting edge for a 744 J John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.5” thick, 21.97” wide and 9.53” in length. 77.40

AT314220 CENTER EDGEJohn Deere style bolt on center edge for a 244 loader. This is a double beveled reversible center edge that is .625" thick, 6" wide and 27.391" in length. 26.60

AT314212 END EDGEJohn Deere style bolt on end edge for a 244 loader. This is a double beveled reversible end edge that is .625" thick, 6" wide and 15.748" in length. 15.30

KV12471 CENTER EDGEJohn Deere style bolt on 84" skid steer edge. This is a double beveled reversible bucket cutting edge that is .625" thick, 6" wide and 84" in length. 78.30

KV12758 CENTER EDGEJohn Deere style bolt on center edge for a 60" skid steer. This is a double beveled reversible center edge that is .625" thick, 6" wide and 60" long. 57.30

KV17819 CENTER EDGEJohn Deere style bolt on center edge for a 78" skid steer. This is a double beveled reversible center edge that is .625" thick, 6" wide and 78" long. 72.70

T101638 CENTER EDGEJohn Deere style bolt on center cutting edge for a 444E John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 41.5" in length. 111.11

T101639 END EDGEJohn Deere style bolt on right or left end cutting edge for a 444E John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 14" wide and 8" in length. 31.75

T101939 CENTER EDGEJohn Deere style center cutting edge for a John Deere Loader. This is a center cutting edge that is 1” thick, 10” wide and 45” long. 117.70

T101940 END EDGEJohn Deere style end cutting edge for a John Deere Loader. This is an end cutting edge that is 1” thick, 14.81” wide and 9.12” long. 35.50

T120979 CENTER EDGEJohn Deere style bolt on center edge for a 450 bulldozer. This is a double beveled reversible center edge that is .75" thick, 8" wide and 70.625" in length. 108.00

T120980 CENTER EDGEJohn Deere style bolt on center cutting edge for a 550G John Deere Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 78.625" in length. 122.14



T126774 CENTER EDGEJohn Deere style bolt on center cutting edge for a 710 John Deere Backhoe. This is a double beveled reversible bucket cutting edge that is .625" thick, 8" wide and 97" in length. 131.84


T129787 CENTER EDGE

John Deere style bolt on center cutting edge for a 624 John Deere Front End Loader. This is a double beveled reversible bucket center cutting edge that is 1” thick, 12” wide and 56.37” in length. 180.40

T129786 END EDGE

John Deere style bolt on end cutting edge for a 624 John Deere Front End Loader. This is a double beveled reversible bucket end cutting edge that is 1” thick, 12.5” wide and 22.33” in length. 70.80

T130078 CENTER EDGE

John Deere style bolt on center cutting edge for a 644G John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.25" thick, 13.874" wide and 62.883" in length. 269.00

T130079 END EDGE

John Deere style bolt on end cutting edge for a 644G John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.25" thick, 13.874" wide and 24.287" in length. 89.60


T146672 END EDGEJohn Deere style bolt on right or left end cutting edge for a 444E John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 14" wide and 8" in length. 31.75

T146673 CENTER EDGEJohn Deere style bolt on center cutting edge for a 444E John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 41.5" in length. 111.11

T150517 CENTER EDGEJohn Deere style bolt on center cutting edge for a 410 Backhoe. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide, and 85.984" in length. 136.00

T156530 CENTER EDGE

John Deere style bolt on center cutting edge for a 744 J John Deere Front End Loader. This is a double beveled reversible bucket center cutting edge that is 1.25” thick, 16” wide and 54.629” in length. 278.90

T157311 CENTER EDGEJohn Deere style bolt on center cutting edge for a 544H John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 41.625" in length. 111.33

T157492 CENTER EDGEJohn Deere style bolt on center cutting edge for a 624H John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 44.375" in length. 115.96

T167828 CENTER EDGEJohn Deere style bolt on center cutting edge for a John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 14" wide and 47.44" in length. 180.00

T167922 CENTER EDGEJohn Deere style bolt on center cutting edge for a 744 J John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.25” thick, 16” wide and 49.92” in length. 254.20

T171386 CENTER EDGE

John Deere style bolt on center cutting edge for a 644 H John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.18" thick, 14.17" wide and 50.267" in length. 209.00

T187988 CENTER EDGEJohn Deere style bolt on center cutting edge for a 850 John Deere Bulldozer. This is a double beveled reversible center cutting edge that is .75” thick, 10” wide and 47.88” in length. 92.90

T198126 CENTER EDGEJohn Deere style bolt on center cutting edge for an 844 J John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.25” thick, 16” wide and 37.598” in length. 190.20

T196455 END EDGE

John Deere style bolt on end cutting edge for an 844 J John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.25” thick, 21.984” wide and 11.122” in length. 77.90


T204083 END EDGEJohn Deere style bolt on end cutting edge for a 750 John Deere Bulldozer. This is a double beveled reversible center cutting edge that is .75” thick, 8” wide and 40.88” in length. 63.40

T209348 CENTER EDGEJohn Deere style bolt on center cutting edge for a D7 Caterpillar Bulldozer. This is a double beveled reversible center cutting edge that is 1.25” thick, 14.17” wide and 50.268” in length. 222.00

T223081 CENTER EDGEJohn Deere style center cutting edge for a John Deere Skid Steer 76” Bucket. This is a center edge that is .625” thick, 6” wide and 76” long. 73.80


T32742 CENTER EDGEJohn Deere style bolt on center cutting edge for a 450 John Deere Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 6" wide and 71.875" in length. 68.34

T79192 CENTER EDGEJohn Deere style bolt on center cutting edge for an 850 John Deere Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 41.875" in length. 64.82

T79193 CENTER EDGEJohn Deere style bolt on end cutting edge for an 850 John Deere Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 41.375" in length. 63.93

T79197 RH OR LH END EDGEJohn Deere style bolt on end cutting edge for a 750 John Deere Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 28.56" in length. 43.01

T79198 CENTER EDGEJohn Deere style bolt on center cutting edge for a 750 John Deere Bulldozer. This is a double beveled reversible bucket center cutting edge that is .75" thick, 8" wide and 35.88" in length. 99.21

T84182 CENTER EDGE

John Deere style bolt on center cutting edge for a 555 John deere Loader, this is a double bevel center cutting edge that is .75" thick, 8" wide and 72.5" long, it takes 7 of a 3/4 X 2 1/4(750X225) plow bolt and 7 of a 3/4(750 Hex Nut) the bolt hole spacing is 10.14" from center to center of the first 2 bolt holes, and 3.31" when measured from the edge of the cutting edge to the center of the first hole. 109.00

T84194 CENTER EDGEJohn Deere style bolt on center cutting edge for a 410 John Deere Front End Loader. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 92.375" in length. 143.74

U16748 CENTER EDGEJohn Deere style bolt on center cutting edge for a 450 John Deere Bulldozer. This is a double beveled reversible center cutting edge that is .625” thick, 6” wide and 65.88” in length. 61.30

John Deere Style End Bits

T112067 HOT CUPPED RH END BITJohn Deere style bolt on end bit for an 850 John Deere Bulldozer. This is a hot cupped right hand end bit that is .75” thick, 8.953” wide and 16.11” in length. 23.50

T112068 HOT CUPPED LH END BITJohn Deere style bolt on end bit for an 850 John Deere Bulldozer. This is a hot cupped left hand end bit that is .75” thick, 8.953” wide and 16.11” in length. 23.50

T120978 LEVEL CUT END BIT RH OR LHJohn Deere style bolt on end bit for a 450G John Deere Bulldozer. This is a level cut right hand or left hand end bit that is .75" thick, 8" wide and 13" in length. 20.28


T160425 RH END BIT

John Deere style bolt on end bit for a 750 John Deere Bulldozer. This is a level cut right hand end bit that is 1” thick, 10” wide and 18.375” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.2” from center to center of the first two bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 2.25” from center to center of the 1st and 2nd bolt holes. 41.80

T160426 LH END BIT

John Deere style bolt on end bit for a 750 John Deere Bulldozer. This is a level cut left hand end bit that is 1” thick, 10” wide and 18.375” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.2” from center to center of the first two bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 2.25” from center to center of the 1st and 2nd bolt holes. 41.80

T161730 LEVEL CUT END BIT RHJohn Deere style bolt on right hand end bit for a 750 John Deere Bulldozer. This is a level cut right hand end bit that is .75” thick, 8” wide and 14.88” in length. 21.90

T161731 LEVEL CUT END BIT LHJohn Deere style bolt on left hand end bit for a 750 John Deere Bulldozer. This is a level cut left hand end bit that is .75” thick, 8” wide and 14.88” in length. 21.90

T162841 LEVEL CUT END BIT RH OR LHJohn Deere style bolt on end bit for a 700 John Deere Bulldozer. This is a level cut right hand or left hand end bit that is .75" thick, 8" wide and 13" in length. 20.94

T167829 END BITJohn Deere style bolt on right hand or left hand end bit for a John Deere Front End Loader. This is a right hand or left hand end bit that is 1.38" thick, 19.19" wide and 9.19" in length. 63.56

T187243 LEVEL CUT END BIT RHJohn Deere style bolt on end bit for a 750 John Deere Bulldozer. This is a level cut right hand end bit that is .75" thick, 10" wide and 18.937" in length. 33.95

T187244 LEVEL CUT END BIT LHJohn Deere style bolt on end bit for a 750 John Deere Bulldozer. This is a level cut left hand end bit that is .75" thick, 10" wide and 18.937" in length. 33.95



T204080 RH END BITJohn Deere style bolt on end bit for a 750 John Deere Bulldozer. This is a level cut right hand end bit that is .75” thick, 8” wide and 18.937” in length. 26.90

T204081 LH END BITJohn Deere style bolt on end bit for a 750 John Deere Bulldozer. This is a level cut left hand end bit that is .75” thick, 8” wide and 18.937” in length. 26.90

T223519 RH END BITJohn Deere style bolt on end bit for a 700 John Deere Bulldozer. This is a level cut right hand end bit that is .75” thick, 8” wide and 13.661” in length. 19.20

T223520 LH END BITJohn Deere style bolt on end bit for a 700 John Deere Bulldozer. This is a level cut left hand end bit that is .75” thick, 8” wide and 13.661” in length. 19.20

T31148 LEVEL CUT END BIT LH/RHJohn Deere style bolt on level cut end bit RH/LH for a 450 John Deere Bulldozer. This is an end bit that is .75" thick, 6" wide and 12" in length. 13.80



T58191 LEVEL CUT END BIT RHJohn Deere style bolt on right hand end bit for a 750 John Deere Bulldozer. This is a level cut right hand end bit that is .75” thick, 8” wide and 13.44” in length. 19.10

T58192 LEVEL CUT END BIT LHJohn Deere style bolt on left hand end bit for a 750 John Deere Bulldozer. This is a level cut left hand end bit that is .75” thick, 8” wide and 13.44” in length. 19.10

John Deere Style Pins62380 PIN Pin for a 555 Ford bucket tooth 0.07PM18PN PIN Esco style pin, takes an 18-20LK lock; Use Item #18-20PN 0.09PMP290 FLEX PIN Hensley style flex pin for a 290 series bucket tooth; Use Item #P290 0.22PMP330 FLEX PIN Hensley style flex pin for a 330 series bucket tooth; Use Item #P330 0.44T-33144 PIN Esco style pin, takes a 25RBG bushing; Use Item #25RPG 0.11T-47165 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN 0.33T112195 PIN John Deere style pin, takes a T112196 retainer 0.14T23P FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09

T25101 ROLL PINHensley style roll pin for a 16 series bucket tooth; the pin is 3" long with a 1/2" pin diameter; Use Item #P160 0.12

T33147 PIN Esco style pin for a 35 series bucket tooth; Use Item #35PN 0.22T35517 PIN Esco style pin for a 35 series bucket tooth; Use Item #35PN 0.22T40910 FLEX PIN H&L style flex pin; Use Item #23FP 0.09

T67083 PINCaterpillar style pin for a J300 series bucket tooth, takes an 8E6259 sleeved retainer; Use Item #9J2308 0.24

TF23P FLEX PIN Fanggs style long flex pin for a 230 series bucket tooth 0.09

TP156 ROLL PINHensley style roll pin for a 156 series bucket tooth, this pin is 2" long and has a .375" pin diameter; Use Item #P156 0.04

U-13927-U FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09U45574 FLEX PIN H&L style flex pin; Use Item #25FP 0.20John Deere Style RetainersPM18LK RUBBER LOCK Esco style lock, takes an 18-20PN pin; Use Item #18-20LK 0.02T-33145 BUSHING Esco style bushing, takes a 25RPG pin; Use Item #25RBG 0.22T-33146 RUBBER LOCK Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK 0.11T-33188 RUBBER LOCK Esco style lock for a 35 series bucket tooth; Use Item #35-40LK 0.11T-47164 RUBBER LOCK Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK 0.11T112196 WASHER John Deere style retainer, takes a T112195 pin 0.09John Deere Style Segments

T149468 SEGMENTJohn Deere style bolt on segment for a 624E John Deere Front End Loader. This is a bucket segment that is 1" thick, 10" wide and 10" in length. 27.78

T157306 SEGMENTJohn Deere style bolt on segment for a 544H John Deere Front End Loader. This is a bucket segment that is 1" thick, 10" wide and 10.1875" in length. 27.12


T157493 SEGMENTJohn Deere style bolt on segment for a 624H John Deere Front End Loader. This is a bucket segment that is 1" thick, 10" wide and 11" in length. 29.98

John Deere Style Sidecutters

109-819 LH SIDECUTTERHitachi style left hand, 6 bolt, excavator sidecutter SX300SCL; takes 6 - 100X300 plow bolts and 6 - 100 hex nuts; Use Item # 2021232 40.70

109-820 RH SIDECUTTERHitachi style right hand, 6 bolt, excavator sidecutter SX300SCR; takes 6 - 100X300 plow bolts and 6 - 100 hex nuts; Use Item # 2021233 40.70

AT131085 SIDECUTTER KITEsco style 3 bolt hole sidecutter kit; comes with a PDE31329 sidecutter, 3 - 875x300 plow bolts and 3 - 875 hex nuts 18.26

T131080 SIDECUTTEREsco style 3 bolt hole sidecutter, takes 3 - 875x300 plow bolts and 3 - 875 hex nuts; Use Item # PDE31329 38.80

John Deere Style Teeth14271 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series; takes a 23FP flex pin; Use Item #230 2.98555T TIGER TOOTH Ford/New Holland style tiger bucket tooth for a 555 series, takes a 62380 pin 2.65555WT TWIN TIGER TOOTH Ford/New Holland style twin tiger bucket tooth for a 555 series; takes a 62380 pin 3.17

8282867 RIPPER TOOTHEsco style ripper bucket tooth for a 22 series; takes a 22RPG pin and a 22RBG bushing; Use Item # 22R10 10.36

70062160 SCARFIER TOOTH Caterpillar style heavy duty, scarifier bucket tooth; Use Item # 6Y5230HD 3.30

AT33513 DIRT TOOTH John Deere style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06AU-12534 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.20

EX21SYL DIRT TOOTHJohn Deere style standard dirt bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item #21SYL 7.06

IP8330ADI DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.98

IP8623TP TWIN TIGER TOOTH John Deere style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #23WTL 2.60

PM18TL DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series, takes an 18-20LK lock and an 18-20PN pin; Use Item #18TL 2.43

PMX156L LONG TOOTH Hensley style long dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156L 1.76PMX156WTL TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156WT 2.65

T-33327 RIPPER TOOTHEsco style 11" long ripper bucket tooth for a 25 series, takes a 25RPG pin and a 25RBG bushing; Use Item #25R11-2 11.24

T-54317 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98T034 FABRICATED TOOTH Fabricated style scarifier/ripper, crimp on bucket tooth; Use Item #1 3/4F 1.20T103189 DIRT TOOTH John Deere style dirt bucket tooth; takes a T112195 pin and a T112196 retainer 5.95T103189-SB DIRT TOOTH John Deere style SBIC dirt bucket tooth, takes a T112195 pin and a T112196 retainer 5.60T105690 DIRT TOOTH John Deere style dirt bucket tooth, takes a T112195 pin and a T112196 retainer 4.76T105690-SB DIRT TOOTH John Deere style SBIC dirt bucket tooth, takes a T112195 pin and a T112196 retainer 4.76T105690RP ROCK TOOTH John Deere style rock bucket tooth, takes a T112195 pin and a T112196 retainer 5.00

T107-3350 FLARE TOOTHCaterpillar style flare bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # 8J3350 17.64

T115117 DIRT TOOTH John Deere style dirt bucket tooth for a 160 series, takes a P160 roll pin; Use Item #X160 6.24T230ST STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230ST 2.65T230WTL TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230WT 3.61T23C DIRT TOOTH H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98T29887 DIRT TOOTH John Deere style dirt bucket tooth, takes a P160 roll pin 5.07T2A DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.34

T33187 DIRT TOOTHJohn Deere style standard dirt bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock; Use Item #40S 15.65

T35516 DIRT TOOTHJohn Deere style conical, standard dirt bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock; Use Item #35S 9.26

T47166 DIRT TOOTHJohn Deere style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45S 20.50

T54317 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98

T56004 DIRT TOOTH John Deere style dirt bucket tooth, takes a 9J2308 pin and a 3G9609 retainer; Use Item #T69647 10.14T56524 TIGER TOOTH H&L style tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.51T69647 DIRT TOOTH John Deere style dirt bucket tooth; takes a 9J2308 pin and a 3G9609 retainer 10.14T6J8812 TIGER TOOTH Caterpillar style ripper bucket tooth for a R450 series; takes a 4T2479 pin; Use Item # 9W2451 33.07T72547 FABRICATED TOOTH John Deere style fabricated bucket tooth, takes a 23FP flex pin; Use Item #3C 1.50T72548 FLARE TOOTH H&L style flare bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230F 3.37T72581 TIGER TOOTH John Deere style tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250T 6.19T72582 TIGER TOOTH H&L style tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item # 250T 6.19

T72583 DIRT TOOTH John Deere style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06T72584 TIGER TOOTH John Deere style tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.51TF220 FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 220 series, takes a P160 roll pin 6.99TF23D FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 230 series; takes a TF23P flex pin 3.79TF290 FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 290 series; takes a P290 flex pin 11.46TF330 FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 330 series; takes a P330 flex pin 15.22TF400 FANGGS TOOTH Fanggs style excavator or backhoe bucket tooth for a 400 series; takes a P400HD flex pin 21.90

TH100339 DIRT TOOTHJohn Deere style conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock; Use Item #30S 5.95

TH106698 DIRT TOOTHJohn Deere style standard dirt bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; Use Item #18TL 2.43

TH109818 DIRT TOOTHJohn Deere style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40S 15.65

TT156 TIGER TOOTH Hensley style tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156T 2.57TT230L TIGER TOOTH H&L style heavy duty, tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.51TT290 TIGER TOOTH Hensley style tiger bucket tooth for a 290 series, takes a P290 flex pin; Use Item #X290T 8.05TT330 TIGER TOOTH Hensley style tiger bucket tooth for a 330 series, takes a P330 flex pin; Use Item #X330T 11.68TX156 DIRT TOOTH Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156 1.20

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)TX160 DIRT TOOTH John Deere style dirt bucket tooth for a 160 series, takes a P160 roll pin; Use Item #X160 6.24TX290 DIRT TOOTH Hensley style standard dirt bucket tooth for a 290 series, takes a P290 flex pin; Use Item #X290 7.94TX290WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 290 series, takes a P290 flex pin; Use Item #X290WT 10.14TX330 DIRT TOOTH Hensley style dirt bucket tooth for a 330 series, takes a P330 flex pin; Use Item #X330 12.57TX330WT TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 330 series, takes a P330 flex pin; Use Item #X330WT 14.88U10577 FABRICATED TOOTH John Deere style fabricated bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.34U13449 DIRT TOOTH John Deere style dirt bucket tooth, takes a P156 roll pin 2.29U13929 FABRICATED TOOTH H&L style fabricated bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #23F 2.00U14437 FABRICATED TOOTH John Deere style fabricated bucket tooth; Use Item #3C 1.50U16086 DIRT TOOTH John Deere style dirt bucket tooth for a 160 series, takes a P160 roll pin 4.41U42751 FABRICATED TOOTH John Deere style fabricated bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #23F 2.00

U43790 CAST TOOTHJohn Deere style heavy duty, cast bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #23FC 2.09

Komatsu Style PartsKomatsu Style Adapters

203-70-64210 WELD ON ADAPTEREsco style weld on adapter for a 30 series bucket tooth with a 1 3/8" lip thickness; Use Item # 855-30 8.15

205-939-7120 WELD ON ADAPTER Komatsu style weld on adapter, takes a 205-70-19570 dirt bucket tooth and an 092-44-02496 pin 14.77

207-70-34151 WELD ON ADAPTEREsco style weld-on adapter for a 40 series bucket tooth with a 1 1/2" lip thickness; Use Item # 1899-40 31.68

207-939-3120 WELD ON ADAPTER Komatsu style weld on adapter 22.93

208-70-34150 WELD ON ADAPTEREsco style weld-on adapter for a 45 series bucket tooth with a 2" lip thickness; Use Item # 2810-45 39.60

208-939-3120 WELD ON ADAPTER Komatsu style weld on bucket adapter 29.32

20X-70-23150 WELD ON ADAPTEREsco style weld on adapter for a 25 series bucket tooth with a 1 3/16" lip thickness; Use Item # 855-25 7.03

20Y-70-14180 WELD ON ADAPTEREsco style weld-on adapter for a 35 series bucket tooth with a 1 1/2" lip thickness; Use Item # 1899-35 22.71

20Y-70-14520 WELD ON ADAPTERKomastu style PC200 weld on, backhoe or excavator adapter for a 1 1/4" lip thickness; use a 205-70-19570 bucket tooth 14.00

468314-R1 WELD ON ADAPTERH&L style weld on, backhoe or excavator adapter with a .63" to .75" lip thickness for a 3C bucket tooth; Use Item #834-3C 2.68

486912-R1 WELD ON ADAPTERH&L style weld on, backhoe or excavtor adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #834-23 3.04

K110015 WELD ON ADAPTER Komatsu weld on adapter with a 1" lip thickness 12.90K112515 WELD ON ADAPTER Komatsu weld on adapter with a 1 1/4" lip thickness 18.30K115015 WELD ON ADAPTER Komatsu weld on adapter with a 1 1/2" lip thickness 12.90K120040 WELD ON ADAPTER Komatsu weld on adapter with a 2" lip thickness 43.50Komatsu Style Cutting Edges

12F-70-31251 CENTER EDGEKomatsu style bolt on center cutting edge for a D31A17 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is .625" thick, 6.3125" wide and 29.875" in length. 31.09



12Y-72-11220 CENTER EDGEKomatsu style bolt on center cutting edge for a Komatsu Front End Loader. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 30" in length. 47.49

12Y-72-11230 END EDGEKomatsu style bolt on end cutting edge for a Komatsu Front End Loader. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 36" in length. 57.32

1282468H1 CENTER EDGEKomatsu style bolt on center cutting edge for a D39 Bulldozer. This is a double beveled reversible bucket center cutting edge that is 3/4” thick, 8” wide and 29.75” in length. 46.10

130-70-41130 CENTER EDGEKomatsu style bolt on center cutting edge for a D65 Bulldozer. This is a double beveled reversible bucket cutting edge that is 3/4” thick, 8” wide and 53” in length. 84.22

130-920-A180 END EDGEKomatsu style bolt on center cutting edge for a D65 Bulldozer. This is a double beveled reversible bucket cutting edge that is 3/4” thick, 8” wide and 47.125” in length. 73.10

134-72-61410 CENTER EDGEKomatsu style bolt on center cutting edge for a D61 Bulldozer. This is a double beveled reversible bucket cutting edge that is 3/4” thick, 8” wide and 53” in length. 82.20

134-72-61420 CENTER EDGEKomatsu style bolt on center cutting edge for a D61 Bulldozer. This is a double beveled reversible bucket cutting edge that is 3/4” thick, 8” wide and 49.5” in length. 76.80

134-72-61450 HOT CUPPED END BIT LHKomatsu style bolt on end bit for a D61 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1” thick, 8” wide and 12.8” in length. 28.2

134-72-61460 HOT CUPPED END BIT RHKomatsu style bolt on end bit for a D61 Komatsu Bulldozer. This is a hot cupped right hand end bit that is 1” thick, 8” wide and 12.8” in length. 28.2

13G-72-61410 CENTER EDGEKomatsu style bolt on center cutting edge for a D61 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is 3/4" thick, 8" wide and 56.25" in length. 87.10

13G-72-61420 END EDGEKomatsu style bolt on end cutting edge for a D61 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is 3/4" thick, 8" wide and 35" in length. 77.16

144-70-11131 CENTER EDGEKomatsu style bolt on center cutting edge for a D65EX-12 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 65.3125" in length. 103.62

144-920-1120 CENTER EDGEKomatsu style bolt on center cutting edge for a D60 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is 3/4" thick, 8" wide and 54.375" in length. 86.00

14X-71-11310 CENTER EDGEKomatsu style bolt on center cutting edge for a D65 Bulldozer. This is a double beveled reversible bucket cutting edge that is 3/4” thick, 8” wide and 54.375” in length. 88.18

14Y-71-11210 CENTER EDGEKomatsu style bolt on center cutting edge for a D65PX-12 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is .75" thick, 8" wide and 65.3125" in length. 101.63

154-70-11314 CENTER EDGEKomatsu style bolt on center cutting edge for a D65 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 45.625" in length. 120.00

175-70-21115 END EDGEKomatsu style bolt on end cutting edge for a D135A-1 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 55" in length. 140.00

17A-71-11351 END EDGEKomatsu style bolt on end cutting edge for a D155AX-3 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is 1 1/4" thick, 13" wide and 30" in length. 122.00


175-70-26310 CENTER EDGEKomatsu style bolt on center cutting edge for a D150 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is 1” thick, 10” wide and 41.875” in length. 109.50

17M-71-21550 END EDGEKomatsu style bolt on end cutting edge for a D275A Bulldozer. This is a double beveled reversible bucket end cutting edge that is 1.25” thick, 13” wide and 42.75” in length. 176.00

19571A1654 CENTER EDGEKomatsu style bolt on center edge for a D355 bulldozer. This is a double beveled reversible center edge that is 1.25" thick, 13" wide and 41.75" long. 179.80

195-70-12491 CENTER EDGE

Komatsu style bolt on center cutting edge for a D155AX-3 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is 1 1/4" thick, 13" wide and 52.25" in length.e center of the first hole. 221.00

195-70-12492 CENTER EDGEKomatsu style bolt on center cutting edge for a D155AX-3 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is 1 1/4" thick, 13" wide and 52.25" in length. 221.00

195-71-61550 CENTER EDGEKomatsu style bolt on center cutting edge for a D375 Bulldozer. This is a double beveled reversible bucket center cutting edge that is 1.5” thick, 16” wide and 34.94” in length. 220.00

198-71-A1540HD END EDGEKomatsu style bolt on end cutting edge for a D475A Bulldozer. This is a double beveled reversible bucket end cutting edge that is 1.75” thick, 16” wide and 33.75” in length. 240.70

198-71-A1550HD CENTER EDGEKomatsu style bolt on center cutting edge for a D475A Bulldozer. This is a double beveled reversible bucket center cutting edge that is 1.75” thick, 16” wide and 46.75” in length. 341.50

195-71-11654 CENTER EDGEKomatsu style bolt on center cutting edge for a D275A Bulldozer. This is a double beveled reversible bucket center cutting edge that is 1.25” thick, 13” wide and 41.75” in length. 179.80

198-71-11181HD CENTER EDGEKomatsu style bolt on center cutting edge for a D375A Bulldozer. This is a double beveled reversible bucket center cutting edge that is 1.50” thick, 16” wide and 47” in length. 295.60

198-72-A1181 END EDGEKomatsu style bolt on end cutting edge for a D375 Bulldozer. This is a double beveled reversible bucket end cutting edge that is 1.5” thick, 16” wide and 33.75” in length. 207.40

41E-70A-5221 CENTER EDGE

Komatsu style bolt on center cutting edge for a WD600 Bulldozer. This is a double beveled reversible bucket center cutting edge that is 1” thick, 10” wide and 53.75” in length. It takes 9 of a 7/8” X 3”(875X300) plow bolt and 9 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the first 2 bolt holes, and 2.875” when measured from the edge of the bucket cutting edge to the center of the first hole. 138.30

417-815-1210 CENTER EDGEKomatsu style bolt on center cutting edge for a WA180 Komatsu Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 53.562" in length. 139.99

417-815-1220 END EDGEKomatsu style bolt on end cutting edge for a WA180 Komatsu Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 21.094" in length. 56.00

417-815-3210 END EDGEKomatsu style bolt on end cutting edge for a WA180 Komatsu Front End Loader. This is a double beveled reversible bucket cutting edge that is 1" thick, 10" wide and 21.094" in length. 153.00

418-815-1210 CENTER EDGEKomatsu style bolt on center cutting edge for a WA300 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 58.75" in length. 296.00


418-815-1220 END EDGEKomatsu style bolt on end cutting edge for a WA300 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 23.22" in length. 116.64


418-815-A110 CENTER EDGEKomatsu style bolt on center cutting edge for a WA300 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 58.75" in length. 296.00



419-815-A120 END EDGEKomatsu style bolt on end cutting edge for a WA300 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 23.22" in length. 116.84

421-815-1110 CENTER EDGEKomatsu style bolt on center cutting edge for a WA450 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 76.8125" in length. 386.00

421-815-1111 CENTER EDGEKomatsu style bolt on center cutting edge for a WA450 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 76.8125" in length. 386.00


421-815-1121 END EDGEKomatsu style bolt on end edge for a WA450 Loader. This is a double beveled reversible bucket end edge that is 1.25" thick, 13" wide and 21.5625" in length. 89.50

421-815-1130 END EDGEKomatsu style bolt on end cutting edge for a WA450 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 21" in length. 105.60






421-815-2110 CENTER EDGEKomatsu style bolt on center edge for a WA450 Loader. This is a double beveled reversible bucket center edge that is 1.25" thick, 13" wide and 81.5" in length. 344.20

421-815-3210 CENTER EDGEKomatsu style bolt on center edge for a WA450 Loader. This is a double beveled reversible bucket center edge that is 1.25" thick, 13" wide and 51.3" in length. 215.20

421-815-3220 END EDGEKomatsu style bolt on end edge for a WA450 Loader. This is a double beveled reversible bucket end edge that is 1.25" thick, 17.921" wide and 11.22" in length. 65.20

421-815-A120 CENTER EDGEKomatsu style bolt on center cutting edge for a WA450 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is .875" thick, 13" wide and 76.8125" in length. 386.00

421-815-A130 END EDGEKomatsu style bolt on end cutting edge for a WA450 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1.375" thick, 13" wide and 21" in length. 105.60




423-815-A110 CENTER EDGEKomatsu style bolt on center cutting edge for a WA380 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1 1/4” thick, 13” wide and 64.031” in length. 268.70

423-815-A120 END EDGEKomatsu style bolt on end cutting edge for a WA380 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1.25” thick, 13” wide and 25” in length. 102.00







424-815-A130 END EDGEKomatsu style bolt on end cutting edge for a WA420 Komatsu Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.563" thick, 10" wide and 22.625" in length. 109.57

424-815-A140 CENTER EDGEKomatsu style bolt on center cutting edge for a WA420 Komatsu Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.563" thick, 10" wide and 68.812" in length. 333.00





425-815-2210 END EDGEKomatsu style bolt on end cutting edge for a WA500 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1 5/8” thick, 21.89” wide and 7.48” in length. 69.29

425-815-2220 CENTER EDGEKomatsu style bolt on center cutting edge for a WA500 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1 5/8” thick, 16” wide and 59.17” in length. 402.82




425-815-A320 END EDGEKomatsu style bolt on end cutting edge for a WA500 Komatsu Loader. This is a double beveled reversible bucket cutting edge that is 1.625" thick, 16" wide and 26" in length. 188.00

Komatsu Style End Bits

112-946-1510 LEVEL CUT END BIT RH OR LHKomatsu style bolt on end bit for a D31A17 Komatsu Bulldozer. This is a level cut right hand or left hand end bit that is .625" thick, 6.3125" wide and 14.1875" in length. 15.43

11G-71-31170 LEVEL CUT END BIT RH OR LHKomatsu style bolt on end bit for a D31A17 Komatsu Bulldozer. This is a level cut right hand or left hand end bit that is .625" thick, 6.3125" wide and 14.1875" in length. 15.43

1283143H1 LEVEL CUT END BIT RH/LHKomatsu style bolt on level cut right hand or left hand end bit for a D39 Bulldozer. This is a double beveled reversible bucket end bit that is 3/4” thick, 8” wide and 22.94” in length. 35.50

12Y-72-11210 END BITKomatsu style bolt on end bit for a Komatsu Front End Loader. This is a right hand or left hand end bit that is .625" thick, 6" wide and 14 15/16" in length. 13.89

13F-Z27-1572 LEVEL CUT END BIT LHKomatsu style bolt on end bit for a D65PX-12 Komatsu Bulldozer. This is a level cut left hand end bit that is 1" thick, 8" wide and 12.875" in length. 27.78

13F-Z27-1582 LEVEL CUT END BIT RHKomatsu style bolt on end bit for a D65PX-12 Komatsu Bulldozer. This is a level cut right hand end bit that is 1" thick, 8" wide and 12.875" in length. 27.78

14Y7111330 END BITKomatsu style bolt on end bit for a D61 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1” thick, 8.25” wide and 13” in length. 28.20

14Y7111340 END BITKomatsu style bolt on end bit for a D61 Komatsu Bulldozer. This is a hot cupped right hand end bit that is 1” thick, 8.25” wide and 13” in length. 28.20

140-70-11131 HOT CUPPED END BIT LHKomatsu style bolt on end bit for a D65EX-12 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1" thick, 8" wide and 10.63" in length. 33.29

140-70-11141 HOT CUPPED END BIT RHKomatsu style bolt on end bit for a D65EX-12 Komatsu Bulldozer. This is a hot cupped right hand end bit that is 1" thick, 8" wide and 10.63" in length. 33.29

140-70-11170 HOT CUPPED END BIT LHKomatsu style bolt on end bit for a D65EX-12 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1” thick, 8” wide and 10.63” in length. 33.29

144-70-11180 HOT CUPPED END BIT RHKomatsu style bolt on end bit for a D65EX-12 Komatsu Bulldozer. This is a hot cupped right hand end bit that is 1” thick, 8” wide and 10.63” in length. 33.29


144-70-11250 HOT CUPPED END BIT LHKomatsu style bolt on end bit for a D65EX-12 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1" thick, 8" wide and 10.63" in length. 33.29

144-70-11251 HOT CUPPED END BIT LHKomatsu style bolt on end bit for a D65EX-12 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1.19" thick, 9.3" wide and 12.8" in length. 39.24


144-70-11261 HOT CUPPED END BIT RHKomatsu style bolt on end bit for a D65EX-12 Komatsu Bulldozer. This is a hot cupped right hand end bit that is 1.19" thick, 9.3" wide and 12.8" in length. 39.24

150-70-21346 HOT CUPPED END BIT RHKomatsu style bolt on end bit for a D65 Komatsu Bulldozer. This is a hot cupped right hand end bit that is 1 1/4" thick, 12" wide and 18.25" in length. 61.99


150-70-21356 HOT CUPPED END BIT LHKomatsu style bolt on end bit for a D65 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1 1/4" thick, 12" wide and 18.25" in length. 61.99

175-70-21126 HOT CUPPED END BIT LHKomatsu style bolt on end bit for a D135A-1 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1.25" thick 89.00

175-70-21136 HOT CUPPED END BIT RHKomatsu style bolt on end bit for a D135A-1 Komatsu Bulldozer. This is a hot cupped right hand end bit that is 1.25" thick. 89.00

175-71-22272 HOT CUPPED END BIT LHKomatsu style bolt on end bit for a D155 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1.375" thick, 13" wide and 21.5" in length. 80.00

175-71-22282 HOT CUPPED END BIT RHKomatsu style bolt on end bit for a D155 Komatsu Bulldozer. This is a hot cupped right hand end bit that is 1.375" thick, 13" wide and 21.5" in length. 80.00

17M-71-21930 HOT CUPPED END BIT LHKomatsu style bolt on end bit for a D155AX-3 Komatsu Bulldozer. This is a hot cupped left hand end bit that is 1.63" thick, 13" wide and 25.94" in length. 136.02

17M-71-21940 HOT CUPPED END BIT RHKomatsu style bolt on end bit for a D155AX-3 Komatsu Bulldozer. This is a hot cupped right hand end bit that is 1.63" thick, 13" wide and 25.94" in length. 136.02

195-71-61930HD LH END BITKomatsu style bolt on hot cupped left hand end bit for a D375 Bulldozer. This is a LH end bit that is 2.25” thick, 19” wide and 29.50” in length. 265.90

195-71-61940HD RH END BITKomatsu style bolt on hot cupped right hand end bit for a D375 Bulldozer. This is a RH end bit that is 2.25” thick, 19” wide and 29.50” in length. 265.90

198-71-A1520HD LH END BITKomatsu style bolt on hot cupped left hand end bit for a D475 Bulldozer. This is a LH end bit that is 3” thick, 22.014” wide and 29.92” in length. 383.00

198-71-A1530HD RH END BITKomatsu style bolt on hot cupped right hand end bit for a D475 Bulldozer. This is a RH end bit that is 3” thick, 22.014” wide and 29.92” in length. 383.00

Komatsu Style Pins092-44-02489 PIN Komatsu style spring clip pin for a 202-70-12130 dirt bucket tooth 0.53092-44-02496 PIN Komatsu style spring clip pin for a 205-70-19570 dirt bucket tooth 0.68092-44-02508 RIPPER PIN Komatsu style spring clip pin for a 423-847-1140 dirt bucket tooth; Use Item # 175-78-21810 0.88092-44-02516 RIPPER PIN Komatsu style spring clip pin for a 423-847-1140 dirt bucket tooth; Use Item # 175-78-21810 0.88092-44-03036 PIN Komatsu style spring clip pin for a 208-70-14152 dirt bucket tooth 1.76100PN PIN Komatsu style spring clip pin, takes a 202-70-12130 dirt bucket tooth; Use Item # 092-44-02489 0.531137223C1 PIN Esco style pin for a 35 series bucket tooth, takes a 35-40LK lock; Use Item #35PN 0.22175-78-21740 RIPPER PIN Komatsu style spring clip pin for a 423-847-1140 dirt bucket tooth; Use Item #175-78-21810 0.88175-78-21810 RIPPER PIN Komatsu style spring clip pin for a 423-847-1110 dirt bucket tooth 0.88195-78-71360 RIPPER PIN Komatsu style spring clip ripper pin; Use Item #6J8811 1.61198-78-21340PL PIN Komatsu style spring clip pin for a 198-79-11320 bucket tooth 1.98198-79-11320 PIN Komatsu style spring clip pin; Use Item #198-78-21340PL 1.98200PN PIN Komatsu style spring clip pin for a 205-70-19570 dirt bucket tooth; Use Item # 092-44-02496 0.68205-70-19610 PIN Komatsu style spring clip pin for a 205-70-19570 dirt bucket tooth; Use Item # 092-44-02496 0.68205-70-69130 PIN Komatsu style spring clip pin for a 205-70-19570 dirt bucket tooth; Use Item # 092-44-02496 0.68207913A360 PIN Esco style pin for a 37 series bucket tooth, takes a 37VPL plug; Use Item #37VPN 0.55208913A230 PIN Esco style pin for a 47 series bucket tooth, takes a 47VPL plug; Use Item #47VPN 0.6620X-70-00100 PIN Komatsu style pin for a 20X-70-14160 bucket tooth20Y913A360 PIN Esco style pin for a 27 series bucket tooth, takes a 27VPL plug; Use Item #27VPN 0.4421N-72-14330 PIN Komatsu style pin 2.20400PN PIN Komatsu style spring clip pin for a 208-70-14152 dirt bucket tooth; Use Item # 092-44-03036 1.76421-847A150 PIN Esco style pin for a 27 series bucket tooth, takes a 27VPL plug; Use Item #27VPN 0.44426-847-1130 PIN Komatsu style spring clip pin for a 208-70-14152 dirt bucket tooth; Use Item #092-44-03036 1.76427-70-13790 PIN Komatsu style spring clip pin 1.00486914-R1 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09532925-R1 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item #24FP 0.12606036C1 PIN Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.20620835C1 PIN Esco style pin for an 18 or a 20 series bucket tooth, takes an 18-20LK lock; Use Item #18-20PN 0.09668979C1 PIN Esco style pin for a 35 series, takes a 35RBG bushing; Use Item #35RPG 0.2063078 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.0963079 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item #24FP 0.12710223-C1 FLEX PIN H&L style flex pin for a 250 series; Use Item #25FP 0.20881901C1 PIN Esco style pin for a 50 series bucket tooth, takes a 50LK lock; Use Item #50PN 0.79883268C1 PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock, Use Item #40PN 0.57924402508 RIPPER PIN Komatsu style spring clip pin; Use Item # 175-78-21810 0.88925473C1 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN 0.33A03-78-11730 PIN Komatsu style pin; Use Item # 092-44-03036 1.76KP15 PIN Komatsu pin for a K15SYL tooth 0.06VJ4011 PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN 0.57VL6114 PIN Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.20Komatsu Style Plow Bolts20Y913A140 PLOW BOLT Komatsu style 875x300 plow bolt, takes an 875 hex nut; Use Item #5J2409 0.5220Y913A150 PLOW BOLT Komatsu style 875x275 plow bolt, takes an 875 hex nut; Use Item #6F0196 0.48Komatsu Style Protectors195-78-21320 PROTECTOR Komatsu style protector; takes a 175-78-21740 pin 32.19195-78-21580 RIPPER SHANK PROTECTOR Komatsu style ripper shank protector; takes a 175-78-21740 pin 49.16Komatsu Style Retainers1206372H1 LOCK Esco style horseshoe lock for a 57 series bucket tooth; Use Item #57LK 0.901208543H1 LOCK Esco style horseshoe lock for a 47 series bucket tooth; Use Item #47LK 0.791208650H2 LOCK Esco style horseshoe lock for a 27 series bucket tooth; Use Item #27LK 0.401233359HJ LOCK Esco style horseshoe lock for a 21 series bucket tooth; Use Item #21LK 0.331259733H1 LOCK Esco style horseshoe lock for a 37 series bucket tooth; Use Item #37LK 0.70207913A370 PLUG Esco style plug for a 37 series bucket tooth, takes a 37VPN pin; Use Item #37VPL 0.15208913A240 PLUG Esco style plug for a 47 series bucket tooth, takes a 47VPN pin; Use Item #47VPL 1.0020Y913A370 PLUG Esco style plug for a 27 series bucket tooth, takes a 27VPN pin; Use Item #27VPL 0.11421-847A140 PLUG Esco style plug for a 27 series bucket tooth, takes a 27VPN pin; Use Item #27VPL 0.11

606037C91 LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item #25-30LK 0.02

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)620833C1 LOCK Esco style lock for an 18 or a 20 series bucket tooth, takes an 18-20PN pin; Use Item #18-20LK 0.02668978C1 BUSHING Esco style bushing for a 35 series, takes a 35RPG pin; Use Item #35RBG 0.04881900C1 LOCK Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK 0.44883269C1 LOCK Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK 0.11925474C1 LOCK Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK 0.11VK4009 LOCK Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK 0.11

VL6116 LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item #25-30LK 0.02

Komatsu Style Ripper Shanks131-78-31180 RIPPER SHANK Komatsu style Ripper Shank for a D40, D50 or a D65 Dozer 132.28141-78-11241 RIPPER SHANK Komatsu style Ripper Shank for a D60, D65 or a D75 Dozer 231.48144-78-11245 RIPPER SHANK Komatsu style Ripper Shank 232.37

15A-79-11120 RIPPER SHANKKomatsu style ripper shank for a Komatsu D155A. This ripper is 3" thick, 12.75" wide and 81" long. 825.00

Komatsu Style Sidecutters205-70-74180L LH SIDECUTTER Komatsu style PC200 left hand sidecutter 33.07205-70-74190R RH SIDECUTTER Komatsu style PC200 right hand sidecutter 33.07Komatsu Style Teeth

107 UNITOOTHKomatsu style unitooth with a .59" lip thickness and a 2.16" bolt hole spacing, center to center; takes 2 - 1/2" x 2" CS cap screws and 2 - 1/2" CS nuts 3.40

103659C1 TIGER TOOTH H&L style heavy duty tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.51

10E-7-22211 UNITOOTHYanmar/Komatsu style unitooth, takes 2 - 625x225 plow bolts and 2 - 625 hex nuts; Use Item # Y211 3.30

1218749H1 ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47R 23.00

1218750H1 ABRASION TOOTHEsco style abrasion bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47ARLB 43.00

1233358H1 DIRT TOOTHEsco style standard dirt bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item #21SYL 7.06

1237300H1 DIRT TOOTHEsco style dirt bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a 27VPL plug; Use Item #27SYL 9.26

1243613H1 DIRT TOOTHEsco style standard dirt bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47SYL 23.81

1243616H1 DIRT TOOTHEsco style dirt bucket tooth for a 57 series. takes a 57LK horseshoe lock or a 57VPN pin and a 57VPL plug; Use Item #57SYL 38.36

1267599H1 TIGER TOOTHEsco style tiger bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and a 37VPL plug; Use Item #37VIP 14.27

1267600H1 DIRT TOOTHEsco style dirt bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and a 37VPL plug; Use Item #37SYL 15.87



131-78-31190 RIPPER TOOTH Komatsu style ripper bucket tooth 23.36141-78-11253 RIPPER TOOTH Komatsu style ripper bucket tooth, takes a 175-78-21810 pin 28.16175-78-31230 RIPPER TOOTH Komatsu style ripper bucket tooth, takes a 175-78-21810 pin 33.07175-78-31232 RIPPER TOOTH Komatsu style ripper bucket tooth; takes a 175-78-21810 pin 33.95175-78-61670 RIPPER TOOTH Komatsu style ripper tooth 33.07

195-78-21331 RIPPER TOOTH Komatsu style ripper bucket tooth, takes a 175-78-21810 pin 40.79195-78-21333 RIPPER TOOTH Komatsu style ripper bucket tooth; takes a 175-78-21810 pin 40.79195-78-71320 RIPPER TOOTH Komatsu style ripper bucket tooth 59.75198-78-21340 DIRT TOOTH Komatsu style dirt bucket tooth, takes a 175-78-21810 pin 85.53202-70-12130 DIRT TOOTH Komatsu style PC100 standard dirt bucket tooth, takes a 092-44-02496 pin 9.04202-70-12130-SB TOOTH Komatsu style SBIC PC100 standard bucket tooth, takes a 092-44-02496 pin 8.05

203-70-43150 DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock; Use Item # 30S 5.95

203-70-43180 DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock; Use Item # 30S 5.95

205-70-19570 DIRT TOOTH Komatsu style PC200 standard dirt bucket tooth, takes a 092-44-02496 pin 10.47205-70-19570-SB TOOTH Komatsu style PC200 SBIC standard bucket tooth, takes a 092-44-02496 pin 8.90205-70-19570RC ROCK CHISEL TOOTH Komatsu style PC200 rock chisel bucket tooth, takes a 092-44-02496 pin 11.90205-70-19570TL TIGER TOOTH Komatsu style PC200 tiger long bucket tooth, takes a 092-44-02496 pin 12.10

205-70-74272 DIRT TOOTHKomatsu style conical, standard dirt bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item #35S 9.26

206-70-54221 DIRT TOOTHEsco style standard dirt bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock; Use Item # 40S 15.65

206913A110 DIRT TOOTHEsco style dirt bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a 27VPL plug; Use Item #27SYL 9.26

207-70-14151 DIRT TOOTH Komatsu style PC300 standard dirt bucket tooth, takes a 175-78-21810 pin 15.98207-70-14151RC ROCK CHISEL TOOTH Komatsu style PC300 rock chisel bucket tooth, takes a 175-78-21810 pin 21.27207-70-14151TL TIGER TOOTH Komatsu style PC300 tiger long bucket tooth, takes a 175-78-21810 pin 17.85

207-70-34212 DIRT TOOTHEsco style standard dirt bucket tooth for a 40 series; takes a 40PN pin and a 35-40LK lock; Use Item # 40S 15.65

207913A110 DIRT TOOTHEsco style dirt bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and a 37VPL plug; Use Item #37SYL 15.87

208-70-14152 DIRT TOOTH Komatsu style PC400 standard dirt bucket tooth, takes a 092-44-03036 pin 21.61208-70-14152RC ROCK CHISEL TOOTH Komatsu style PC400 rock chisel bucket tooth, takes a 092-44-03036 pin 31.97208-70-14270 HEAVY DUTY TOOTH Komatsu style PC400 heavy duty bucket tooth, takes a 092-44-03036 pin 30.20208-70-14270TL TIGER TOOTH Komatsu style PC400 tiger long bucket tooth, takes a 092-44-03036 pin 28.60


208-70-34211 DIRT TOOTHEsco style standard dirt bucket tooth for a 45 series; takes a 45PN pin and a 45LK lock; Use Item # 45S 20.50

208913A210 DIRT TOOTHEsco style standard dirt bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47SYL 23.81

20T-70-13130 UNITOOTHKomatsu style unitooth with a .67" lip thickness and a 2.36" bolt hole spacing, center to center; takes 2 - 625 X 225 plow bolts and 2 - 625 hex nuts 5.30

20T-70-13130-SB UNITOOTHKomatsu style SBIC unitooth with a .67" lip thickness and a 2.36" bolt hole spacing, center to center; takes 2 - 625 X 225 plow bolts and 2 - 625 hex nuts 5.30

20T-70-72320 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; Use Item # 18TL 2.43

20X-70-14160 DIRT TOOTH Komatsu style PC60 standard dirt bucket tooth, takes a 20X-70-00100 pin 5.07

20X-70-23160 DIRT TOOTHEsco style PC100 conical, standard dirt bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock; Use Item # 25S 5.07

20X-70-23161 DIRT TOOTHEsco style PC100 conical, standard dirt bucket tooth for a 25 series; takes a 25-30PN pin and a 25-30LK lock; Use Item # 25S 5.07

21N-72-14410 DIRT TOOTH Komatsu style PC1000 dirt bucket tooth, takes a 175-78-21810 pin 105.40

3031710R1 DIRT TOOTHEsco style dirt bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #30S 5.95

3034790R1 DIRT TOOTHEsco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40S 15.65

3034797R1 DIRT TOOTHEsco style dirt bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #30S 5.95

3150641R1 DIRT TOOTHEsco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40S 15.65

3150643R1 ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40RDX 14.68

419-70-13164 HEAVY DUTY TOOTH Komatsu style heavy duty bucket tooth 33.07419-70-13174 HEAVY DUTY TOOTH Komatsu style heavy duty bucket tooth 33.07423-847-1140 DIRT TOOTH Komatsu style WA400 standard dirt bucket tooth, takes a 175-78-21740 pin 18.51423-847-1140-SB DIRT TOOTH Komatsu style WA400 SBIC standard dirt bucket tooth, takes a 175-78-21740 pin 17.60426-847-1110 DIRT TOOTH Komatsu style WA500 standard dirt bucket tooth, takes a 092-44-03036 pin 26.23426-847-1110-SB DIRT TOOTH Komatsu style SBIC WA500 standard dirt bucket tooth, takes a 092-44-03036 pin 25.29427-70-13731 DIRT TOOTH Komatsu style WA800 standard dirt bucket tooth 64.00485353-R1 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.20532948-R1 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98

606035C1 DIRT TOOTHEsco style standard dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #25S 5.07

615687C1 DIRT TOOTHEsco style standard dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #25S 5.07

615895CJ ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40RDX 14.68

620834C1 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series, takes an 18-20LK lock and an 18-20PN pin; Use Item #18TL 2.43

63090 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.9863091 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.19637587-R1 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.19637589-R1 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06

637608C1 TIGER TOOTHEsco style tiger bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #25VIP 5.87

637613C1 DIRT TOOTHEsco style standard dirt bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item #35S 9.26

637615C1 TIGER TOOTHEsco style tiger bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item #35VIP 7.94

637619C1 TIGER TOOTHEsco style tiger bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40VIP 16.53

637623C1 DIRT TOOTHEsco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45S 20.50

637624C1 TIGER TOOTH Esco style tiger bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45VIP 17.20

668977C1 RIPPER TOOTHEsco style 15" ripper bucket tooth for a 35 series, takes a 35RPG pin and a 35RBG bushing; Use Item #35R15-2A 28.44

710222-C1 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06711524-C1 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06711525-C1 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06E161-3027WTL TWIN TIGER TOOTH Komatsu style twin tiger bucket tooth, takes a 9J2358 pin and a 3G9549 sleeved retainer 9.35

PC100 DIRT TOOTHKomatsu style PC100 standard dirt bucket tooth, takes a 092-44-02496 pin; Use Item # 202-70-12130 9.04



PC400 DIRT TOOTH Komatsu style standard dirt bucket tooth, takes a 092-44-03036 pin; Use Item # 208-70-14152 21.61PC60 DIRT TOOTH Komatsu style standard dirt bucket tooth, takes a 21N-72-14330 pin; Use Item # 20X-70-14160 5.07

SX130 UNITOOTH UNITOOTHKomatsu style unitooth with a .67" lip thickness and a 2.36" bolt hole spacing, center to center; takes 2 - 625 X 225 plow bolts and 2 - 625 hex nuts; Use Item # 20T-70-13130 5.30

Kubota Style PartsKubota Style Adapters

70090-20853 WELD ON ADAPTERHensley style weld on adapter for a 156 series bucket tooth with a 1" lip thickness; Use Item # X550-156 4.40

70090-32082 WELD ON ADAPTER Hensley style weld on adapter for a 156 series with a 5/8" lip thickness; Use Item #X230-156 3.81

70090-33096 WELD ON ADAPTERH&L style weld on, excavator adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item # 834-23 3.04


70090-33111 WELD ON ADAPTERH&L style weld on, wrap around adapter with a 1 1/4" lip thickness for a 240 series bucket tooth; Use Item # 2740W24 4.76

Kubota Style Cutting Edges

3/8 X 4 X 48 CENTER CUTTING EDGEKubota bolt on center cutting edge, takes 7 of a 625X200 plow bolt and 7 of a 625 Hex Nut, the bolt hole spacing is 6" from center to center of the bolt holes 41.89

Kubota Style Pins

70090-32084 ROLL PINHensley style roll pin for a 156 series bucket tooth, this pin is 2" long and has a .375" pin diameter; Use Item #P156 0.04

70090-33094 PIN Esco style pin, goes with an 18-20LK lock; Use Item #18-20PN 0.0970090-33107 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.0970090-33108 ROLL PIN Hensley style roll pin for a 156 series bucket tooth; Use Item # P156 0.04Kubota Style Retainers70090-33095 RUBBER LOCK Esco style rubber lock, takes an 18-20PN pin; Use Item #18-20LK 0.02Kubota Style Shanks

70050-93015 SCARIFIER SHANKH&L style gannon shank for a 1 3/4" bucket tooth; it is 16" long, 2 3/8" wide and 5/8" thick; Use Item # H920 7.72

Kubota Style Teeth

6691 UNITOOTHKubota style unitooth with a .63" lip thickness and a 2.16" bolt hole spacing, center to center; takes 2 - 5/8" x 2" CS cap screws and 2 - 5/8" CS nuts 4.60

70050-93014 CRIMP ON TOOTH Fabricated style scarifier/ripper crimp-on bucket tooth; Use Item # 1 3/4F 1.2070090-32083 DIRT TOOTH Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156 1.2070090-32086 LONG TOOTH Hensley style long dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156L 1.7670090-32087 HD TOOTH Hensley style heavy duty bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156LP 3.0470090-32088 FLARE TOOTH Hensley style flare bucket tooth for a 156 series, takes a P156 roll pin; Use Item # X156F 2.8770090-32089 TIGER TOOTH Hensley style tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156T 2.5770090-32090 TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156WT 2.6570090-32091 HD TOOTH Hensley style heavy duty bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156LP 3.0470090-33080 STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230ST 2.65



70090-33101 DIRT TOOTH H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.9870090-33103 FLARE TOOTH H&L style flare bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230F 3.3770090-33104 TIGER TOOTH H&L style heavy duty tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230T 2.5170090-33105 TWIN TIGER TOOTH H&L style twin tiger bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230WT 3.6170090-33106 STAR TOOTH H&L style star bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230ST 2.6570090-33110 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item # 240 4.19

Liebherr Style PartsLiebherr Style Pins5934322 PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN 0.575934323 PIN Esco style pin for a 55 series bucket tooth, takes a 55LK lock; Use Item #55PN 0.995934324 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN 0.335934325 PIN Esco style pin for a 50 series bucket tooth, takes a 50LK lock; Use Item #50PN 0.79Liebherr Style Retainers


5934223 RUBBER LOCK Esco style rubber lock for a 55 series bucket tooth, takes a 55PN pin; Use Item #55LK 0.505934224 RUBBER LOCK Esco style rubber lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK 0.115934225 RUBBER LOCK Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK 0.44Liebherr Style Teeth

5934568 DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #25S 5.07







5934800 TIGER TOOTH H&L style tiger bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250T 6.19





Linkbelt Style PartsLinkbelt Style Pins3V-38 FLEX PIN H&L style flex pin for a 27 series bucket tooth; Use Item #27FP 0.203V0072 PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN 0.57

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)3V0074 PIN Esco style pin for a 45 series bucket tooth, takes a 35-40LK lock; Use Item #45PN 0.333V0277 PIN Esco style pin for a 25R series bucket tooth, takes a 25RBG bushing; Use Item #25RPG 0.11

3V0383 PIN Esco style pin for a 50 series bucket tooth, takes a 50LK lock; Use Item #50PN 0.793V0650 RIPPER PIN Esco style pin for a 35R series bucket tooth, takes a 35RBG bushing; Use Item #35RPG 0.203V0711 PIN Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.203V0712 PIN Esco style pin for a 35 series bucket tooth, takes a 35-40LK lock; Use Item #35PN 0.223V0714 PIN Esco style pin for a 55 series bucket tooth, takes a 55LK lock; Use Item #55PN 0.993V0741 SPOOL Esco style spool, takes a 29W1W wedge; Use Item #29SPS 1.10

3V0752 RATCHET PINEsco style ratchet pin for a 40 series bucket tooth, takes a 35-40LKR ratchet lock; Use Item #40PNR 0.26

3V0812 PIN Esco style pin for an 18 and a 20 series bucket tooth, takes an 18-20LK lock; Use Item #18-20PN 0.09

3V1138 RATCHET PINEsco style ratchet pin for a 25 and a 30 series bucket tooth, takes a 25-30LKR lock; Use Item #25-30PNR 0.20

3V1140 RATCHET PIN Esco style ratchet pin for a 35 series bucket tooth, takes a 35LKR ratchet lock; Use Item #35PNR 0.22



3V1145 RATCHET PIN Esco style ratchet pin for a 55 series bucket tooth, takes a 55LKR ratchet lock; Use Item #55PNR 0.803V60 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN 0.333V72 PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN 0.57Linkbelt Style Retainers3V0060 RUBBER LOCK Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK 0.113V0073 RUBBER LOCK Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK 0.11

3V0082 RUBBER LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth, takes a 25-30PN pin; Use Item #25-30LK 0.02

3V0276 BUSHING Esco style bushing for a 25R series bucket tooth, takes a 25RPG pin; Use Item #25RBG 0.223V0382 RUBBER LOCK Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK 0.443V0649 BUSHING Esco style bushing for a 35R series bucket tooth, takes a 35RPG pin; Use Item #35RBG 0.043V0713 RUBBER LOCK Esco style rubber lock for a 55 series bucket tooth, takes a 55PN pin; Use Item #55LK 0.503V0740 WEDGE Esco style fluted wedge, takes a 29SPS spool; Use Item #29W1W 1.65

3V0751 RATCHET LOCKEsco style ratchet lock for a 35 and a 40 series bucket tooth, takes a 40PNR pin; Use Item #35-40LKR 0.11

3V0813 RUBBER LOCK Esco style lock for an 18 series bucket tooth, takes an 18-20PN pin; Use Item #18-20LK 0.02

3V1139 RATCHET LOCKEsco style ratchet lock for a 25 and a 30 series bucket tooth, takes a 25-30PNR pin; Use Item #25-30LKR 0.02

3V1142 RATCHET LOCK Esco style ratchet lock for a 45 series bucket tooth, takes a 45PNR ratchet pin; Use Item #45LKR 0.11

3V1144 RATCHET LOCK Esco style ratchet lock for a 50 series bucket tooth, takes a 50PNR ratchet pin; Use Item #50LKR 0.15

3V1146 RATCHET LOCK Esco style ratchet lock for a 55 series bucket tooth, takes a 55PNR ratchet pin; Use Item #55LKR 0.153V1173 LOCK Esco style horseshoe lock for a 47 series bucket tooth; Use Item #47LK 0.793V1178 LOCK Esco style horseshoe lock for a 57 series bucket tooth; Use Item #57LK 0.903V1195 LOCK Esco style horseshoe lock for a 37 series bucket tooth; Use Item #37LK 0.703V1201 LOCK Esco style horseshoe lock for a 21 series bucket tooth; Use Item #21LK 0.333V1350 LOCK Esco style horseshoe lock for a 21 series bucket tooth; Use Item #21LK 0.333V1352 LOCK Esco style horseshoe lock for a 37 series bucket tooth; Use Item #37LK 0.703V1353 LOCK Esco style horseshoe lock for a 47 series bucket tooth; Use Item #47LK 0.793V1354 LOCK Esco style horseshoe lock for a 57 series bucket tooth; Use Item #57LK 0.903V383 RUBBER LOCK Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK 0.443V73 RUBBER LOCK Esco style lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK 0.113V74 RUBBER LOCK Esco style lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK 0.11Linkbelt Style Teeth17V-341 DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP roll pin; Use Item #2AC 1.343V-37 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.16

3V0061 DIRT TOOTHEsco style standard dirt bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45S 20.50

3V0071 DIRT TOOTHEsco style standard dirt bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40S 15.65


3V0278 RIPPER TOOTHEsco style 11" long ripper bucket tooth for a 25 series, takes a 25RPG pin and a 25RBG bushing; Use Item #25R11-2 11.24

3V0384 DIRT TOOTH Esco style dirt bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50S 24.43

3V0648 RIPPER TOOTHEsco style ripper bucket tooth for a 35 series, takes a 35RPG pin and a 35RBG bushing; Use Item #35R14-2 28.88

3V0701 FLARE TOOTHEsco style 7" conical, flare bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40S7F 15.20

3V0703 TIGER TOOTHEsco style tiger bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40VIP 16.53

3V0704 DIRT TOOTHEsco style conical dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #25S 5.07

3V0705 TIGER TOOTHEsco style tiger bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #25VIP 5.87




3V0708 TIGER TOOTH Esco style tiger bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45VIP 17.20

3V0725 ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40RDX 14.68

3V0730 TIGER TOOTH Esco style tiger bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50VIP 30.20

3V0734 TWIN TIGER TOOTHEsco style twin tiger bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40TVIP 18.72

3V0735 TWIN TIGER TOOTHEsco style twin tiger bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45TVIP 18.87

3V0748 DIRT TOOTHEsco style standard, conical dirt bucket tooth for a 30 series, takes a 25-30LK lock and a 25-30PN pin; Use Item #30S 5.95

3V0753 ROCK TOOTH Esco style rock bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50R 23.15

3V0811 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; Use Item #18TL 2.43

3V0818 ROCK TOOTH Esco style rock bucket tooth for a 55 series, takes a 55PN pin and a 55LK lock; Use Item #55LP 37.50

3V0823 ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40RDX 14.68

3V1031 DIRT TOOTHEsco style standard, conical dirt bucket tooth for a 25 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #25S 5.07

3V1037 DIRT TOOTHEsco style standard, conical dirt bucket tooth for a 30 series, takes a 25-30LK lock and a 25-30PN pin; Use Item #30S 5.95

3V1049 TIGER TOOTHEsco style tiger bucket tooth for a 30 series, takes a 25-30PN pin and a 25-30LK lock; Use Item #30VIP 6.17

3V1052 ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item #35R 7.50

3V1053 FLARE TOOTHEsco style flare, conical bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item #35S6F 14.90



3V1062 FLARE TOOTHEsco style flare, 6" conical bucket tooth for a 40 series, takes a 40PN pin and a 35-40LK lock; Use Item #40S6F 13.67



3V1069 FLARE TOOTHEsco style conical, flare bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45S8F 28.44



3V1103 TIGER TOOTHEsco style tiger bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; Use Item #18VIP 1.76


3V1105 TWIN TIGER TOOTHEsco style twin tiger bucket tooth for a 35 series, takes a 35PN pin and a 35-40LK lock; Use Item #35TVIP 12.80


3V1107 TIGER TOOTH Esco style tiger bucket tooth for a 45 series, takes a 45PN pin and a 45LK lock; Use Item #45VIP 17.203V1108 TIGER TOOTH Esco style tiger bucket tooth for a 50 series, takes a 50PN pin and a 50LK lock; Use Item #50VIP 30.20

3V1179 DIRT TOOTHEsco style dirt bucket tooth for a 57 series, takes a 57LK horseshoe lock or a 57VPN pin and a 57VPL plug; Use Item #57SYL 38.36

3V1180 TIGER TOOTHEsco style tiger bucket tooth for a 57 series, takes a 57LK horseshoe lock or a 57VPN pin and a 57VPL plug; Use Item #57VIP 33.95

3V1184 ABRASION TOOTHEsco style abrasion bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47ARLB 43.00

3V1185 ROCK TOOTHEsco style rock bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47LP 19.00

3V1186 ROCK CHISEL TOOTHEsco style rock chisel bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47R 23.00

3V1187 TWIN TIGER TOOTHEsco style twin tiger bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47TVIP 26.90






3V1246 FLARE TOOTHEsco style flare bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and a 37VPL plug; Use Item #37S8F 26.59


3V1274 DIRT TOOTHEsco style standard dirt bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item #21SYL 7.06




3V1347 FLARE TOOTHEsco style flare bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47S9F 32.98






Linkbelt Style Weld-On NosesWN30 NOSE PIECE Esco style weld on nose for a 30 series 6.00WN37 NOSE PIECE Esco style weld on nose for a 37 series 15.80

Massey Ferguson Style PartsMassey Ferguson Adapters

1753221-M1 WELD ON ADAPTERH&L style weld on, excavator or backhoe adapter with a .63" to .88" lip thickness for a 2A bucket tooth; Use Item #835-2A 1.50

2756708-M1 WELD ON ADAPTERH&L style weld on, excavator or backhoe adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #834-23 3.04

705308-M1 WELD ON ADAPTERH&L style weld on, excavator or backhoe adapter with a .63" to .75" lip thickness for a 3C bucket tooth; Use Item #834-3C 2.68

706271-M1 WELD ON ADAPTER H&L style wrap around, weld on adapter with a 1 1/4" lip thickness; Use Item # 2740W25 7.12

707716-M1 WELD ON ADAPTERH&L style weld on adapter with a 1" lip thickness for a 230 series bucket tooth, takes a 23FP flex pin; Use Item # 834-23 3.04

707718-M91 WELD ON ADAPTERH&L style weld on, excavator or backhoe adapter with a 1" lip thickness for a 230 series bucket tooth; Use Item #834-23 3.04

WB834-3C WELD ON ADAPTERH&L style weld on, excavator or backhoe adapter with a .63" to .75" lip thickness for a 3C bucket tooth; Use Item #834-3C 2.68

Massey Ferguson Pins2756710-M1 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09707715-M1 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.09708514-M1 FLEX PIN H&L style flex pin for a 220 series bucket tooth; Use Item # 22FP 0.10722252-M1 FLEX PIN H&L style flex pin for a 270 series bucket tooth; Use Item #27FP 0.20722258-M1 FLEX PIN H&L style flex pin for a 250 series bucket tooth; Use Item #25FP 0.20723984-M1 FLEX PIN H&L style flex pin for a 240 series bucket tooth; Use Item #24FP 0.12

Massey Ferguson Teeth1096823-M1 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.981752958-M1 DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP flex pin; Use Item #2AC 1.342756709-M1 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.98571530-M91 CRIMP ON TOOTH Fabricated style scarifier/ripper crimp-on bucket tooth; Use Item # 1 3/4F 1.20671530-M91 FABRICATED TOOTH H&L style fabricated scarifier/ripper crimp on bucket tooth; Use Item # 1 3/4F 1.20705056-M1 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.20707229-M1 CRIMP ON TOOTH H&L style heavy duty, crimp on bucket tooth; Use Item #3CHXL 2.20707736-M1 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98708966-M1 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.98723985-M1 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.19726240-M1 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.16726269-M1 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.06

New Holland Style PartsNew Holland Cutting Edges

115631A1 CENTER EDGENew Holland style bolt on center edge for a DC85 Bulldozer. This is a double beveled reversible center edge that is .75" thick, 8" wide and 34.13" long. 53.00





76598268 CENTER EDGENew Holland style bolt on center edge for a DC80 Bulldozer. This is a double beveled reversible center edge that is .75" thick, 6" wide and 41.75" in length. 48.60

86577165 CENTER EDGENew Holland style bolt on center edge for a Backhoe. This is a double beveled reversible center edge that is .75" thick, 8" wide and 59.874" long. 92.00

86577167 CENTER EDGENew Holland style bolt on center edge for a backhoe. This is a double beveled reversible center edge that is .75" thick, 8" wide and 65.874" long. 102.00

86577171 CENTER EDGENew Holland style bolt on center cutting edge for a New Holland Backhoe. This is a double beveled reversible bucket center cutting edge that is .75” thick, 8” wide and 77.87” in length. 121.80

New Holland End Bits

76598267 RH END BITNew Holland style bolt on level cut right hand end bit for a DC80 Bulldozer. This is a right hand end bit that is .75" thick, 6" wide and 13" in length. 14.00

76599870 LH END BITNew Holland style bolt on level cut left hand end bit for a DC80 Bulldozer. This is a left hand end bit that is .75" thick, 6" wide and 13" in length. 14.00

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)Romac Style PartsRomac Adapters8110 SCARIFIER SHANK champion scarifier/ripper shank 12.56Romac Counter Display

CD1 COUNTER DISPLAYRomac's counter display comes with box and 1 each of the following: 230, 23FP, 6737325, 6737326, 1U3202, 9W7112, 8E6209 8.40

CD2 COUNTER DISPLAY 107.94CD3 COUNTER DISPLAY 273.54Romac Pins, Tools, Blocks & BitsKB250 SOIL TOOL 2.12KB250B BLOCK 2.50Romac Plow Bolts & Nuts1 1/4" CONE NUT Caterpillar style 125 cone nut (5P8362) 0.521 1/4" X 4 PLOW BOLT Caterpillar style 125x400 plow bolt (5P8823) 1.721 1/4" X 5 PLOW BOLT Caterpillar style 125x500 plow bolt (5P8361) 1.861/2 X 2 INCH BOLT BOLT 1/2 X 2 Inch Bolt 0.101/2 INCH NUT NUT 1/2 Inch Nut 0.061/2 INCH LOCK WASHER WASHER 1/2 Inch Lock Washer 0.035/8 X 3 INCH BOLT BOLT 5/8 X 3 Inch Bolt 0.105/8 INCH NUT NUT 5/8 Inch Nut 0.065/8 INCH LOCK WASHER WASHER 5/8 Inch Lock Washer 0.033/4 X 3 INCH BOLT BOLT 3/4 X 3 0.103/4 INCH NUT NUT 3/4 Inch Nut 0.063/4 INCH LOCK WASHER WASHER 3/4 Inch Lock Washer 0.031 X 3 PLOW BOLT Caterpillar style 100x300 plow bolt (4F4042) 0.671 X 4 PLOW BOLT Caterpillar style 100x400 plow bolt (8J2928) 0.921" HEX NUT Caterpillar style 100 hex nut (2J3507) 0.291" CONE NUT Caterpillar style 100 cone nut (8J2933) 0.29100 CONE NUT CONE NUT Caterpillar style 100 cone nut (8J2933) 0.26100 HEX NUT HEX NUT Caterpillar style 100 hex nut (2J3507) 0.29100X275 PLOW BOLT Caterpillar style 100x275 plow bolt (1J5607) 0.70100X300 PLOW BOLT Caterpillar style 100x300 plow bolt (4F4042) 0.67100X325 PLOW BOLT Caterpillar style 100x325 plow bolt (4J9058) 0.73100X350 PLOW BOLT Caterpillar style 100x350 plow bolt (4J9208) 0.79100X375 PLOW BOLT Caterpillar style 100X375 grade 8 plow bolt, takes a 100 Hex Nut 0.85100X400 PLOW BOLT Caterpillar style 100x400 plow bolt (5P8136) 0.92100X450 PLOW BOLT Caterpillar style 100X450 plow bolt, takes a 100 Hex Nut(1J3527) 1.05100X500 PLOW BOLT Caterpillar style 100x500 grade 8 plow bolt (1J2034) 1.17125 CONE NUT CONE NUT Caterpillar style 125 cone nut (5P8362) 0.52125 HEX NUT HEX NUT Caterpillar style 125 hex nut (3K9770) 0.54125X400 PLOW BOLT Caterpillar style 125x400 plow bolt (5P8823) 1.72125X450 PLOW BOLT Caterpillar style 125x450 plow bolt (6V8360) 1.94125X500 PLOW BOLT Caterpillar style 125x500 plow bolt (5P8361) 1.86125X550 PLOW BOLT Caterpillar style 125X550 plow bolt, takes a 125 Hex Nut 1.93125X600 PLOW BOLT Caterpillar style 125x600 grade 8 plow bolt (2H1537) 2.002J2548 PLOW BOLT Caterpillar style 875x350 grade 8 plow bolt (2J2548) 0.664F3671 PLOW BOLT Caterpillar style 625x400 grade 8 plow bolt (4F3671) 0.385/8 INCH LOCK NUT Bobcat style hex nut for a bobcat assembly 0.065/8 INCH FN FLANGE NUT Bobcat style flange nut for a bobcat assembly 0.095/8 INCH X 2 INCH FLAT HEAD CAP SCREW Bobcat style flat head cap screw for a bobcat assembly 0.205J4772 PLOW BOLT Caterpillar style 875x250 grade 8 plow bolt (5J4772) 0.44625 HEX NUT HEX NUT Caterpillar style 625 grade 8 hex nut (4K0367) 0.10625X200 PLOW BOLT Caterpillar style 625x200 grade 8 plow bolt (4F3654) 0.17625X225 PLOW BOLT Caterpillar style 625x225 grade 8 plow bolt (3F5108) 0.20625X250 PLOW BOLT Caterpillar style 625x250 grade 8 plow bolt (4F3656) 0.22625X275 PLOW BOLT Caterpillar style 625x275 grade 8 plow bolt (4F3657) 0.27625X300 PLOW BOLT Caterpillar style 625x300 grade 8 plow bolt (4F3658) 0.29625X350 PLOW BOLT Caterpillar style 625x350 grade 8 plow bolt (4F3665) 0.33750 HEX NUT HEX NUT Caterpillar style 750 grade 8 hex nut (2J3506) 0.15750X200 PLOW BOLT Caterpillar style 750x200 grade 8 plow bolt (4F3672) 0.26750X225 PLOW BOLT Caterpillar style 750x225 grade 8 plow bolt (4F7827) 0.28750X250 PLOW BOLT Caterpillar style 750x250 grade 8 plow bolt (5J4773) 0.31750X275 PLOW BOLT Caterpillar style 750x275 grade 8 plow bolt (5J4771) 0.34750X300 PLOW BOLT Caterpillar style 750x300 grade 8 plow bolt (4F0138) 0.37750X350 PLOW BOLT Caterpillar style 750X350 plow bolt, takes a 750 Hex Nut 0.45750X400 PLOW BOLT Caterpillar style 750x400 grade 8 plow bolt (1D4612) 0.53750X450 PLOW BOLT Caterpillar style 750x450 grade 8 plow bolt (051627) 0.59875 HEX NUT HEX NUT Caterpillar style 875 grade 8 hex nut (2J3505) 0.20875X275 PLOW BOLT Caterpillar style 875x275 grade 8 plow bolt (6F0196) 0.48875X300 PLOW BOLT Caterpillar style 875x300 grade 8 plow bolt (5J2409) 0.52875X325 PLOW BOLT Caterpillar style 875X325 plow bolt, takes a 875 Hex Nut(8J2935) 0.60875X400 PLOW BOLT Caterpillar style 875x400 grade 8 plow bolt (1D4630) 0.759F1351 PLOW BOLT Caterpillar style 875x500 grade 8 plow bolt (9F1351) 0.989F9522 PLOW BOLT Caterpillar style 875x225 grade 8 plow bolt (9F9522) 0.40Romac Sidecutters

03SCL LH SIDECUTTERLeft hand mini excavator or backhoe 3 bolt hole sidecutter, takes 3 - 500x200 plow bolts and 3 - 500 hex nuts 1.98

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)03SCR RH SIDECUTTER

Right hand mini excavator or backhoe 3 bolt hole sidecutter, takes 3 - 500x200 plow bolts and 3 - 500 hex nuts 1.98

Romac Style TeethPRT-1 PIN REMOVAL TOOL Pin Removal Tool 6.70PRT-2 PIN REMOVAL TOOL Pin Removal Tool 3.62

Rubber TracksRubber TracksASV Rubber Tracks

457-101.6-51ASV POSITRACK RUBBER TRACK

A Caterpillar ASV positrack style rubber track(J track) that is 18 inches wide and has 51 internal metal crossbars that are 4 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 287B; ASV style RC85, RC100.

271.00


A Caterpillar ASV positrack style rubber track(J track) that is 18 inches wide and has 56 internal metal crossbars that are 4 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 267B, 277B; ASV style MD702810, 2800/2810, 4500/4520, 4810.

291.00

Bobcat Rubber Tracks

180-72-39 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) that is 7.09 inches wide and has 39 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style MT50; Ditch Witch style 520, SK500; Kubota style KX21; Takeuchi style TB08.

55.00


An excavator rubber track(J track) that is 9.06 inches wide and has 45 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 220, 320; Caterpillar style MS10; Kubota style KC120, Kc140; Mitsubishi style MS10.

100.40


An excavator rubber track(J track) that is 9.84 inches wide and has 45 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style X220, X320-2, X322-1; Caterpillar style MS010; Ditch Witch style XT850; Kubota style KC120.

125.60

300-52.5N-74 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 74 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 325, 328.

253.10


An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 76 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 76; Hitachi style EX25-2, EX300UR, HX64-B; Kobelco style SK25SR-2; Kubota style K022, K025; New Holland style EC25SR.

259.90


An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 80 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style X231, X331, X331E, X334; Ditch Witch style MX27; New Holland style EC35/SR; Kubota style K028, K030, KX91, KX92, KX92S; Komatsu style PC15.2, PC15.3, PC15, PC15R, PC20-6, PC20-7, 20R1S, PC25R/8, PC25MR-2, PC27R, PC28UU-1, PC35MR, PC35MR2; Case style CK32, CX27.

273.60


An excavator rubber track(J track) with a normal 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 92 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 430; Ditch Witch style JT2720, 2720, 2320.

314.60


An excavator rubber track(J track) that is 12.6 inches wide and has 78 internal metal crossbars that are 2.13 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 331; Ditch Witch style MX27; Komatsu style PC20-6, PC20-7, PC25R/8; Kubota style K028, K030, KX91, KX92, KX92S; New Holland style EC35/SR.

278.50


An excavator rubber track(J track) that is 12.6 inches wide and has 90 internal metal crossbars that are 2.13 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 430; Ditch Witch style 2320, 2720.

321.30

320-84C-50 SKID STEER RUBBER TRACK

A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 12.6 inches wide and has 50 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

343.00


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 12.6 inches wide and has 53 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 864, T200; John Deere style CT332, CT322; Komatsu style CK20, CK25.

364.00

320-84MB-46 SKID STEER RUBBER TRACK

A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 46 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T140.

318.30


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 50 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

346.00

320-86BC-49 SKID STEER RUBBER TRACK

A skid steer rubber track(J track) with a special Bobcat c tread pattern, this rubber track is 12.6 inches wide and has 49 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

332.00


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 12.6 inches wide and has 48 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T190, T180; Takeuchi style TL126.

334.00




352.60


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 48 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T190, T180; Takeuchi style TL126.

331.20


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 52 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T300; John Deere style CT322; Takeuchi style TL130.

358.80


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 52 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 864, T200; John Deere style CT322; JCB style 190T.

460.70

400-72.5R-74 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) with a special bottom roller style tread pattern, this rubber track is 15.75 inches wide and has 74 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style X337, X341; Case style CK50; Daewoo style Solar 55, Solar 55V; JCB style 805, 805-2; Volvo style ECR58, EC55, EC55B; Kubota style KX161-2, KX161-3; Kobelco style E45SR.

692.60

400-72.5W-74 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) with a wide 2.25 inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 74 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style X337, X341; Case style CK50, CK50 Maxi; JCB style 805, 805-2, 8052, 8060; Volvo style ECR 58, EC55, EC55B; Kobelco style E45SR; Caterpillar style 304.5/CR, 305CR; Hitachi style EX58MU; John Deere style 50DD; New Holland style EH55; Kubota style KX161, U45-3, RX502/VA.

632.70


An excavator rubber track(J track) with a wide 2 1/4 inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 76 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style E60; Caterpillar style 305CCR; Hitachi style TX55-1; Kubota style KH055; New Holland style PC60.

649.80


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 53 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 864 SSL 18”, T200 18”; John Deere style CT322.

542.20


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 17.72 inches wide and has 56 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T250, T300, T320; New Holland style C185, C195; Case style 450CT.

572.90


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 55 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T250, T300, T320; Case style 445CT, 445CT; New Holland style C185 and C195.

552.20



557.00

R300-52.5C-92 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track) with a split c tread pattern that is 11.81 inches wide and has 92 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 430; Ditch Witch style 2320, 2720.

285.00

R300-52.5N-74 EXCAVATOR RUBBER TRACK

An excavator rubber track (R track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 74 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 325, 328.

230.00


An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 76 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 76; Hitachi style EX25-2, EX300UR, HX64-B; Kobelco style SK25SR-2; Kubota style K022, K025; New Holland style EC25SR.

236.00


An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 80 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style X231, X331, X331E, X334; Ditch Witch style MX27; New Holland style EC35/SR; Kubota style K028, K030, KX91, KX92, KX92S; Komatsu style PC15.2, PC15.3, PC15, PC15R, PC20-6, PC20-7, 20R1S, PC25R/8, PC25MR-2, PC27R, PC28UU-1, PC35MR, PC35MR2; Case style CK32, CX27.

248.00


An excavator rubber track(R track) that is 11.81 inches wide and has 82 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 331; Ditch Witch style MX27; Komatsu style PC20-6, PC20-7, PC25R/8; Kubota style K028, K030, KX91, KX92, KX92S; New Holland style EC35/SR.

248.00


An excavator rubber track(R track) with a normal 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 92 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 430; Ditch Witch style JT2720, 2720, 2320.

285.00

R320-86C-48 SKID STEER RUBBER TRACK

A skid steer rubber track(R track) with a split c tread pattern, this rubber track is 12.6 inches wide and has 48 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

306.00


R320-86MB-48 SKID STEER RUBBER TRACK

A skid steer rubber track(R track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 48 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T190, T180; Takeuchi style TL126.

306.00


A skid steer rubber track(R track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 49 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

312.00


A skid steer rubber track(R track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 52 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T300; John Deere style CT322; Takeuchi style TL130.

331.00


A skid steer rubber track(R track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 54 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 864, T200; John Deere style CT332, CT322; Komatsu style CK20, CK25.

331.00

R320-86X-44 SKID STEER RUBBER TRACK

A skid steer rubber track(R track) with an X or polar tread pattern, this rubber track is 12.6 inches wide and has 44 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T140.

289.00

R320-86X-53 VTS RUBBER TRACK

A VTS (versatile track system) (R track) that bolts directly to your skid steer standard hubs. This is a skid steer rubber track with an X or polar tread pattern; this rubber track is 12.6 inches wide and has 53 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 259C, 259B3; Bobcat style T200.

333.00

R400-72.5R-74 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track) with a special bottom roller style tread pattern, this rubber track is 15.75 inches wide and has 74 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style X337, X341; Case style CK50; Daewoo style Solar 55, Solar 55V; JCB style 805, 805-2; Volvo style ECR58, EC55, EC55B; Kubota style KX161-2, KX161-3; Kobelco style E45SR.

685.00

R400-72.5W-74 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track) with a wide 2.25 inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 74 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style X337, X341; Case style CK50, CK50 Maxi; JCB style 805, 805-2, 8052, 8060; Volvo style ECR 58, EC55, EC55B; Kobelco style E45SR; Caterpillar style 304.5/CR, 305CR; Hitachi style EX58MU;

550.00


An excavator rubber track(R track) with a wide 2 1/4 inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 76 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style E60; Caterpillar style 305CCR; Hitachi style TX55-1; Kubota style KH055; New Holland style PC60.

550.00


A skid steer rubber track(R track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 53 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 864 SSL 18”, T200 18”; John Deere style CT322.

472.00


A skid steer rubber track(R track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 56 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T250, T300, T320; Case style 445CT, 445CT; New Holland style models C185 and C195.

498.00


A skid steer rubber track(R track) with a multi bar tread pattern, this rubber track is 17.72 inches wide and has 56 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T250, T300, T320; New Holland style C185, C195; Case style 450CT.

463.00

Case Rubber Tracks



273.60


An excavator rubber track(J track) with a wide 1.5 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 84 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 303/CR, 303.5/CR, ME35, MM35, MX35, MM35B, MM35t, MM40SR; Daewoo style Solar 035; JCB style 803, 804, 830, 8027Z, 8032Z; Kubota style 30, 35; Case style CX36; Kobelco style SK027, SK030; Komatsu style PC35MR-2.

314.20


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 14.96 inches wide and has 50 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Case style 420CT, 440CT.

443.00



692.60


An excavator rubber track(J track) with a wide 2 ¼ inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 72 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; Case style 50, 50Maxi, 50RTB, CK52; Caterpillar style 304, 304.5, MM40CR, MM40B, MM40T, MM45, MM45B, MM45T, MM55SR, MM57SR, MX45, 305CR, 305SR; Hitachi style EX40, EX50, 50U; John Deere style 50ZTS; Kobelco style Z16; Kubota style KH040, KX040, KX161-2, K040, K045, K151, KH045, KH130, KH151, KX045, KX151.2, U45, U56G; New Holland style BC45, EC45, EC45SR; Takeuchi style TB55R, TB55UR; Terex style TC48, TC50.

615.60




632.70



572.90



552.20



248.00


An excavator rubber track(R track) with a wide 1.5 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 84 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 303/CR, 303.5/CR, ME35, MM35, MX35, MM35B, MM35t, MM40SR; Daewoo style Solar 035; JCB style 803, 804, 830, 8027Z, 8032Z; Kubota style 30, 35; Case style CX36; Kobelco style SK027, SK030; Komatsu style PC35MR-2.

296.00



685.00


An excavator rubber track(R track) with a wide 2 ¼ inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 72 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; Case style 50, 50Maxi, 50RTB, CK52; Caterpillar style 304, 304.5, MM40CR, MM40B, MM40T, MM45, MM45B, MM45T, MM55SR, MM57SR, MX45, 305CR, 305SR; Hitachi style EX40, EX50, 50U; John Deere style 50ZTS; Kobelco style Z16; Kubota style KH040, KX040, KX161-2, K040, K045, K151, KH045, KH130, KH151, KX045, KX151.2, U45, U56G; New Holland style BC45, EC45, EC45SR; Takeuchi style TB55R, TB55UR; Terex style TC48, TC50.

535.00


An excavator rubber track(R track) with a wide 2.25 inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 74 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style X337, X341; Case style CK50, CK50 Maxi; JCB style 805, 805-2, 8052, 8060; Volvo style ECR 58, EC55, EC55B; Kobelco style E45SR; Caterpillar style 304.5/CR, 305CR; Hitachi style EX58MU; John Deere style 50DD; New Holland style EH55; Kubota style KX161, U45-3, RX502/VA.

550.00



498.00



463.00

Caterpillar Rubber Tracks



100.40


An excavator rubber track(J track) that is 9.06 inches wide and has 31 internal metal crossbars that are 3.78 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 301.1/301.5, MM15; Kobelco style SK013/1, SK014, SK015/1; Komatsu style PC05, PC05 R/7, PC05-6 5001; Kubota style KX41-3.

119.70



125.60


An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 90 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 303.5CCR

307.80


An excavator rubber track(J track) with a wide 1 ½ inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 78 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 302.5; Kobelco style SK024, SK025, Z13, SK024.1, SK025.1, SK025.2, SK025SR, SK25SR; Mitsubishi style MM25; Takeuchi style TB025, TB125; Volvo style EC25, EC30.

291.70




314.20

320-86BC-54 VTS RUBBER TRACK

A VTS (versatile track system) (J track) that bolts directly to your skid steer standard hubs. This is a skid steer rubber track with a special Bobcat c tread pattern; this rubber track is 12.6 inches wide and has 54 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit Caterpillar VTS models.

372.60


A Caterpillar ASV positrack style rubber track(J track) that is 14.96 inches wide and has 42 internal metal crossbars that are 4 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 247, 257.

158.00



615.60



632.70



649.80


An excavator rubber track(J track) that is 17.72 inches wide and has 82 internal metal crossbars that are 2.80 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 307 A/SSR, E70/B.

794.60

450-86C-59 VTS RUBBER TRACK

A VTS (versatile track system) (J track) that bolts directly to your skid steer standard hubs. This is a skid steer rubber track with a split c tread pattern; this rubber track is 17.72 inches wide and has 59 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit Caterpillar style VTS models.

592.40

450-86C-60 VTS RUBBER TRACK

A VTS (versatile track system) (J track) that bolts directly to your skid steer standard hubs. This rubber track has a split c tread pattern; this rubber track is 17.72 inches wide and has 60 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 279-C, 289-C, 299-C.

602.40

450-86MB-59 VTS RUBBER TRACK

A VTS (versatile track system) (J track) that bolts directly to your skid steer standard hubs. This is a skid steer rubber track(J track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 59 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit Caterpillar style VTS models.

583.00


A Caterpillar ASV positrack style rubber track(J track) that is 18 inches wide and has 51 internal metal crossbars that are 4 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 287B; ASV style RC85, RC100.

271.00


A Caterpillar ASV positrack style rubber track(J track) that is 18 inches wide and has 56 internal metal crossbars that are 4 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 267B, 277B; ASV style MD702810, 2800/2810, 4500/4520, 4810.

291.00

R230-96-31 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track) that is 9.06 inches wide and has 31 internal metal crossbars that are 3.78 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 301.1/301.5, MM15; Kobelco style SK013/1, SK014, SK015/1; Komatsu style PC05, PC05 R/7, PC05-6 5001; Kubota style KX41-3.

109.00


An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 90 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 303.5CCR.

279.00


An excavator rubber track(R track) with a wide 1 ½ inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 78 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 302.5; Kobelco style SK024, SK025, Z13, SK024.1, SK025.1, SK025.2, SK025SR, SK25SR; Mitsubishi style MM25; Takeuchi style TB025, TB125; Volvo style EC25, EC30.

275.00



296.00


A VTS (versatile track system) (R track) that bolts directly to your skid steer standard hubs. This is a skid steer rubber track with an X or polar tread pattern; this rubber track is 12.6 inches wide and has 53 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 259C, 259B3; Bobcat style T200.

333.00




535.00



550.00



550.00


An excavator rubber track(R track) that is 17.72 inches wide and has 82 internal metal crossbars that are 2.80 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 307 A/SSR, E70/B.

756.00


A VTS (versatile track system) (J track) that bolts directly to your skid steer standard hubs. This is a skid steer rubber track(R track) that has an X or polar tread pattern, this rubber track is 17.72 inches wide and has 59 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit Caterpillar style VTS models.

557.00


A VTS (versatile track system)(R track) that bolts directly to your skid steer standard hubs. This rubber track has an X or polar tread pattern; this rubber track is 17.72 inches wide and has 60 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Caterpillar style 279-C, 289-C, 299-C.

573.00

Daewoo Rubber Tracks


An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 84 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Daewoo style Solar 035, Solar 035 plus; Hyundai style Robex 35.5; Hitachi style UE30; Komatsu style PC20. PC25, PC30, PC35, PC38.

287.30



314.20



692.60


An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 84 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Daewoo style Solar 035, Solar 035 plus; Hyundai style Robex 35.5; Hitachi style UE30; Komatsu style PC20. PC25, PC30, PC35, PC38.

261.00



296.00



685.00

Ditch Witch Rubber Tracks


An excavator rubber track(J track) that is 7.09 inches wide and has 32 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style SK300/350; Kobelco style SK300.

45.10



55.00


An excavator rubber track(J track) that is 7.09 inches wide and has 42 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style SK650.

59.20


An excavator rubber track(J track) that is 9.06 inches wide and has 39 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style HT25, JT1200, JT2511; Yanmar style YB10R.

87.00

230-72-56 TRENCHER RUBBER TRACK

A trencher rubber track(J track) that is 9.06 inches wide and has 56 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style JT3510, JT820, JT920, JT920L.

124.90



An excavator rubber track(J track) that is 9.84 inches wide and has 39 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style JT2511.

108.80



125.60

280-72-56 TRENCHER RUBBER TRACK

A trencher rubber track(J track) that is 11.02 inches wide and has 56 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style 1220, 1720, 2020, 3510.

156.20



273.60


An excavator rubber track(J track) with a normal 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 92 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 430; Ditch Witch style JT2720, 2720, 2320.

314.60


An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 98 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style JT2720 Mach1, JT3020.

335.20



278.50


An excavator rubber track(J track) that is 12.6 inches wide and has 90 internal metal crossbars that are 2.13 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 430; Ditch Witch style 2320, 2720.

321.30

R300-52.5C-92 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track) with a split c tread pattern that is 11.81 inches wide and has 92 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 430; Ditch Witch style 2320, 2720.

285.00



248.00



248.00


An excavator rubber track(R track) with a normal 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 92 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 430; Ditch Witch style JT2720, 2720, 2320.

285.00


An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 98 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style JT2720 Mach1, JT3020.

304.00

Hitachi Rubber Tracks


An excavator rubber track(J track) that is 7.09 inches wide and has 37 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Hitachi style EX7, EX8; Kobelco style SK002, SK007, SK009; Komatsu style PC03, PC09; Kubota style K007, K008; Takeuchi style TB007, TB108; Yanmar style B07, B08.

52.20


An excavator rubber track(J track) that is 9.06 inches wide and has 33 internal metal crossbars that are 3.78 inches apart when measured from center to center. This rubber track will fit the following models; Hitachi style ZX16/18.

127.40



259.90


An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 78 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Hitachi style EX20UR/UR3, EX25/1, EX27U/29U, EX12/1/2, EX15/1/2, EX15/U; John Deere style 27ZTS; Kobelco style SK25SR; Yanmar style B27-2.

266.80



287.30


An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 86 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Hitachi style EX35, EX35U, EX36U, EX40UR; John Deere style 35ZTS/D, 35D; Terex style TC37; Komatsu style PC30MRX.

294.10



An excavator rubber track(J track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 88 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Hitachi style ZX30-2/35-2.

301.00



615.60



632.70



649.80


An excavator rubber track(R track) that is 9.06 inches wide and has 33 internal metal crossbars that are 3.78 inches apart when measured from center to center. This rubber track will fit the following models; Hitachi style ZX16/18.

116.00



236.00


An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 78 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Hitachi style EX20UR/UR3, EX25/1, EX27U/29U, EX12/1/2, EX15/1/2, EX15/U; John Deere style 27ZTS; Kobelco style SK25SR; Yanmar style B27-2.

242.00



261.00


An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 86 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Hitachi style EX35, EX35U, EX36U, EX40UR; John Deere style 35ZTS/D, 35D; Terex style TC37; Komatsu style PC30MRX.

267.00


An excavator rubber track(R track) with a narrow 1 inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 88 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Hitachi style ZX30-2/35-2.

273.00



535.00



550.00



550.00

Hyundai Rubber Tracks



287.30



261.00

JCB Rubber Tracks




314.20


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 12.6 inches wide and has 50 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

343.00


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 50 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

346.00

320-86BC-49 SKID STEER RUBBER TRACK

A skid steer rubber track(J track) with a special Bobcat c tread pattern, this rubber track is 12.6 inches wide and has 49 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

332.00



460.70



692.60



632.70



296.00


A skid steer rubber track(R track) with a split c tread pattern, this rubber track is 12.6 inches wide and has 48 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

306.00


A skid steer rubber track(R track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 49 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T180, T190, T200; JCB style 190T.

312.00



685.00



550.00

John Deere Rubber Tracks



266.80



294.10



364.00



352.60




358.80



460.70


An excavator rubber track(J track) with a narrow 19/16 inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 72 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; John Deere style 50C; Komatsu style PC40, PC45, PC50, PC50MR-2.

594.00



615.60



632.70



542.20


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 56 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; John Deere style CT332; Komatsu style CK30, CK35.

562.20



557.00



242.00



267.00



331.00



331.00


An excavator rubber track(R track) with a narrow 19/16 inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 72 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; John Deere style 50C; Komatsu style PC40, PC45, PC50, PC50MR-2.

517.00



535.00



550.00


A skid steer rubber track(R track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 53 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style 864 SSL 18”, T200 18”; John Deere style CT322.

472.00



A skid steer rubber track(R track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 57 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; John Deere style CT332; Komatsu style CK30, CK35.

507.00

Kobelco Rubber Tracks


An excavator rubber track(J track) that is 7.09 inches wide and has 32 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style SK300/350; Kobelco style SK300.

45.10



52.20



119.70



259.90



266.80



291.70



314.20


An excavator rubber track(J track) with a wide 1 ½ inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 90 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Kobelco style SK038.

336.60



692.60



615.60



632.70

450-81N-74 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) with a 19/16 inch sprocket inside guide width, this rubber track is 17.72 inches wide and has 74 internal metal crossbars that are 3.19 inches apart when measured from center to center. This rubber track will fit the following models; Kobelco style SK60/1/2/3.

767.00

450-83.5K-72 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) with a Komatsu style tread pattern, this rubber track is 17.72 inches wide and has 72 internal metal crossbars that are 3.29 inches apart when measured from center to center. This rubber track will fit the following models; Kobelco style SK60/1/2/3.

769.70



109.00



236.00



242.00




275.00



296.00


An excavator rubber track(R track) with a wide 1 ½ inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 90 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Kobelco style SK038.

317.00



685.00



535.00



550.00

R450-81N-74 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track) with a 19/16 inch sprocket inside guide width, this rubber track is 17.72 inches wide and has 76 internal metal crossbars that are 3.19 inches apart when measured from center to center. This rubber track will fit the following models; Kobelco style SK60/1/2/3.

531.00

Komatsu Rubber Tracks



52.20



119.70


An excavator rubber track(J track) that is 9.06 inches wide and has 35 internal metal crossbars that are 3.78 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC15; Kubota style KX41; Takeuchi style TB15.

135.10



273.60



287.30



294.10



314.20



278.50



364.00




352.60


An excavator rubber track(J track) that is 15.75 inches wide and has 46 internal metal crossbars that are 4.21 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC40FR-1; Yanmar style VIO40.

506.00


An excavator rubber track(J track) with a narrow19/16th’sinchsprocketinsideguidewidth,thisrubbertrackis15.75incheswideandhas70internalmetalcrossbarsthatare2.85inchesapartwhenmeasuredfromcentertocenter.Thisrubbertrackwillfitthefollowingmodels;KomatsustylePC40,PC50.

577.50


An excavator rubber track(J track) with a narrow 19/16 inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 72 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; John Deere style 50C; Komatsu style PC40, PC45, PC50, PC50MR-2.

594.00

400-75.5-74EXCAVATOR OFFSET RUBBER TRACK

An excavator rubber track(J track) with an offset tread pattern, this rubber track is 15.75 inches wide and has 74 internal metal crossbars that are 2.97 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC40FR-2, FM40; Yanmar style VIO57, VIO-55, B50-2B, VIO50-2.

659.30


An excavator rubber track(J track) with a 19/16 inch sprocket inside guide width, this rubber track is 17.72 inches wide and has 76 internal metal crossbars that are 3.19 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC60-5, PC60-6, PC60-7, PC75-1, PC75-2, PC75-3, PC75UU, PC75UU-2, PC75UU-3; Yanmar style VI70, VI75.

788.00


An excavator rubber track(J track) with a Komatsu style tread pattern, this rubber track is 17.72 inches wide and has 74 internal metal crossbars that are 3.29 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC60-5, PC60-6, PC60-7, PC75-1, PC75-2, PC75-3, PC75UU, PC75UU-2, PC75UU-3; Yanmar style VI70, VI75.

791.10


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 56 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; John Deere style CT332; Komatsu style CK30, CK35.

562.20



109.00


An excavator rubber track(R track) that is 9.06 inches wide and has 35 internal metal crossbars that are 3.78 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC15; Kubota style KX41; Takeuchi style TB15.

123.00



248.00



248.00



261.00



267.00



296.00



331.00


An excavator rubber track(R track) with a narrow19/16th’sinchsprocketinsideguidewidth,thisrubbertrackis15.75incheswideandhas70internalmetalcrossbarsthatare2.85inchesapartwhenmeasuredfromcentertocenter.Thisrubbertrackwillfitthefollowingmodels;KomatsustylePC40,PC50.

517.00


An excavator rubber track(R track) with a narrow 19/16 inch sprocket inside guide width, this rubber track is 15.75 inches wide and has 72 internal metal crossbars that are 2.85 inches apart when measured from center to center. This rubber track will fit the following models; John Deere style 50C; Komatsu style PC40, PC45, PC50, PC50MR-2.

517.00



An excavator rubber track(R track) with a 19/16 inch sprocket inside guide width, this rubber track is 17.72 inches wide and has 76 internal metal crossbars that are 3.19 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC60-5, PC60-6, PC60-7, PC75-1, PC75-2, PC75-3, PC75UU, PC75UU-2, PC75UU-3; Yanmar style VI70, VI75.

748.00


A skid steer rubber track(R track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 57 internal metal crossbars that are 3.31 inches apart when measured from center to center. This rubber track will fit the following models; John Deere style CT332; Komatsu style CK30, CK35.

507.00

Kubota Rubber Tracks



52.20



55.00



100.40



119.70



135.10



125.60


An excavator rubber track(J track), with a Komatsu style tread pattern, this rubber track is 11.81 inches wide and has 80 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Kubota style KX91-3.

312.80



259.90



273.60



314.20



278.50

350-54.5-86 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) that is 13.78 inches wide and has 86 internal metal crossbars that are 2.15 inches apart when measured from center to center. This rubber track will fit the following models; Kubota style KX121-2, KX121-3.

444.60

350-56R-84 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) with a special bottom roller style, this rubber track is 13.78 inches wide and has 84 internal metal crossbars that are 2.21 inches apart when measured from center to center. This rubber track will fit the following models; Kubota style KX121-2, KX121-3.

458.60



692.60



615.60




632.70



649.80

450-81W-76 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) with a wide 1.97 inch sprocket inside guide width, this rubber track is 17.72 inches wide and has 76 internal metal crossbars that are 3.19 inches apart when measured from center to center. This rubber track will fit the following models; Kubota style KX080-3.

813.20



109.00



123.00

R300-52.5K-80 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track), with a Komatsu style tread pattern, this rubber track is 11.81 inches wide and has 80 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Kubota style KX91-3.

288.00



236.00



248.00



248.00



296.00

R350-56R-84 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track) with a special bottom roller style, this rubber track is 13.78 inches wide and has 84 internal metal crossbars that are 2.21 inches apart when measured from center to center. This rubber track will fit the following models; Kubota style KX121-2, KX121-3.

380.00

R350-86R-84 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track), with a special bottom roller style tread pattern. This rubber track is 13.78 inches wide and has 84 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Kubota style KX121-2, KX121-3.

380.00



685.00



535.00



550.00



550.00

R450-81W-76 EXCAVATOR RUBBER TRACK

An excavator rubber track(R track) with a wide 1.97 inch sprocket inside guide width, this rubber track is 17.72 inches wide and has 76 internal metal crossbars that are 3.19 inches apart when measured from center to center. This rubber track will fit the following models; Kubota style KX080-3.

748.00

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)Mitsubishi Rubber Tracks



100.40



291.70


An excavator rubber track(J track) with a narrow19/16th’sinchsprocketinsideguidewidth,thisrubbertrackis15.75incheswideandhas74internalmetalcrossbarsthatare2.85inchesapartwhenmeasuredfromcentertocenter.Thisrubbertrackwillfitthefollowingmodels;MitsubishistylePC50MR2;TakeuchistyleTB045,TB145,TB35FR.

610.50



275.00


An excavator rubber track(R track) with a narrow19/16th’sinchsprocketinsideguidewidth,thisrubbertrackis15.75incheswideandhas74internalmetalcrossbarsthatare2.85inchesapartwhenmeasuredfromcentertocenter.Thisrubbertrackwillfitthefollowingmodels;MitsubishistylePC50MR2;TakeuchistyleTB045,TB145,TB35FR.

531.00

New Holland Rubber Tracks



259.90



273.60


An excavator rubber track(J track) with a wide 1 ½ inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 88 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; New Holland style EH/LE35, EH35.

329.10



278.50



615.60



632.70



649.80



572.90



552.20



236.00




248.00



248.00


An excavator rubber track(R track) with a wide 1 ½ inch sprocket inside guide width, this rubber track is 11.81 inches wide and has 88 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; New Holland style EH/LE35, EH35.

310.00



535.00



550.00



550.00



498.00



463.00

Takuchi Rubber Tracks



52.20



55.00



135.10



291.70


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 12.6 inches wide and has 48 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T190, T180; Takeuchi style TL126.

334.00


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 48 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T190, T180; Takeuchi style TL126.

331.20



358.80

350-52.5-86 EXCAVATOR RUBBER TRACK

An excavator rubber track(J track) that is 13.78 inches wide and had 86 internal metal crossbars that are 2.07 inches apart when measured from center to center. This rubber track will fit the following models; Takeuchi style TB035, TB135.

366.40


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 14.96 inches wide and has 48 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Takeuchi style TL126, TL26.

425.30


An excavator rubber track(J track) with a narrow19/16th’sinchsprocketinsideguidewidth,thisrubbertrackis15.75incheswideandhas74internalmetalcrossbarsthatare2.85inchesapartwhenmeasuredfromcentertocenter.Thisrubbertrackwillfitthefollowingmodels;MitsubishistylePC50MR2;TakeuchistyleTB045,TB145,TB35FR.

610.50




615.60


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 48 internal metal crossbars that are 3.94 inches apart when measured from center to center. This rubber track will fit the following models; Takeuchi style TL140.

599.00


A skid steer rubber track(J track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 50 internal metal crossbars that are 3.94 inches apart when measured from center to center. This rubber track will fit the following models; Takeuchi style TL150, TL250.

624.00



595.20



620.00


A skid steer rubber track(J track) with a multi bar tread pattern, this rubber track is 17.72 inches wide and has 52 internal metal crossbars that are 3.94 inches apart when measured from center to center. This rubber track will fit the following models; Takeuchi style TL140.

607.00



123.00



275.00


A skid steer rubber track(R track) with a multi bar tread pattern, this rubber track is 12.6 inches wide and has 48 internal metal crossbars that are 3.39 inches apart when measured from center to center. This rubber track will fit the following models; Bobcat style T190, T180; Takeuchi style TL126.

306.00



331.00


An excavator rubber track(R track) with a narrow19/16th’sinchsprocketinsideguidewidth,thisrubbertrackis15.75incheswideandhas74internalmetalcrossbarsthatare2.85inchesapartwhenmeasuredfromcentertocenter.Thisrubbertrackwillfitthefollowingmodels;MitsubishistylePC50MR2;TakeuchistyleTB045,TB145,TB35FR.

531.00



535.00


A skid steer rubber track(R track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 48 internal metal crossbars that are 3.94 inches apart when measured from center to center. This rubber track will fit the following models; Takeuchi style TL148, TL248.

539.00



561.00


A skid steer rubber track(R track) with a split c tread pattern, this rubber track is 17.72 inches wide and has 52 internal metal crossbars that are 3.94 inches apart when measured from center to center. This rubber track will fit the following models; Takeuchi style TL140.

539.00



561.00

Terex Rubber Tracks



294.10



615.60




267.00



535.00

Vermeer Rubber Tracks

230-72-54 RUBBER TRACK

An excavator rubber track(J track) that is 9.06 inches wide and has 54 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Vermeer style D7x11, D10x15, D16x20. 120.40

Volvo Rubber Tracks



291.70



692.60



632.70



275.00



685.00



550.00

Yanmar Rubber Tracks



52.20


An excavator rubber track(J track) that is 9.06 inches wide and has 39 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Ditch Witch style HT25, JT1200, JT2511; Yanmar style YB10R.

87.00


An excavator rubber track(J track) that is 9.06 inches wide and has 47 internal metal crossbars that are 2.84 inches apart when measured from center to center. This rubber track will fit the following models; Yanmar style B17-2, B18EX, VIO15/2.

104.80



266.80


A rubber track(J track) with an offset tread pattern, this rubber track is 11.81 inches wide and has 78 internal metal crossbars that are 2.19 inches apart when measured from center to center. This rubber track will fit the following models; Yanmar style B27, VI027, VI027.2..

316.70

300-55.5-82 OFFSET RUBBER TRACK

A rubber track(J track) with an offset tread pattern, this rubber track is 11.81 inches wide and has 82 internal metal crossbars that are 2.19 inches apart when measured from center to center. This rubber track will fit the following models; Yanmar style VI035, VI030, B37V.

332.90


An excavator rubber track(J track) that is 15.75 inches wide and has 46 internal metal crossbars that are 4.21 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC40FR-1; Yanmar style VIO40.

506.00


An excavator rubber track(J track) with an offset tread pattern, this rubber track is 15.75 inches wide and has 74 internal metal crossbars that are 2.97 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC40FR-2, FM40; Yanmar style VIO57, VIO-55, B50-2B, VIO50-2.

659.30



An excavator rubber track(J track) with a 19/16 inch sprocket inside guide width, this rubber track is 17.72 inches wide and has 76 internal metal crossbars that are 3.19 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC60-5, PC60-6, PC60-7, PC75-1, PC75-2, PC75-3, PC75UU, PC75UU-2, PC75UU-3; Yanmar style VI70, VI75.

788.00


An excavator rubber track(J track) with a Komatsu style tread pattern, this rubber track is 17.72 inches wide and has 74 internal metal crossbars that are 3.29 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC60-5, PC60-6, PC60-7, PC75-1, PC75-2, PC75-3, PC75UU, PC75UU-2, PC75UU-3; Yanmar style VI70, VI75.

791.10



242.00


An excavator rubber track(R track) with a 19/16 inch sprocket inside guide width, this rubber track is 17.72 inches wide and has 76 internal metal crossbars that are 3.19 inches apart when measured from center to center. This rubber track will fit the following models; Komatsu style PC60-5, PC60-6, PC60-7, PC75-1, PC75-2, PC75-3, PC75UU, PC75UU-2, PC75UU-3; Yanmar style VI70, VI75.

748.00

Takeuchi Style PartsTakeuchi Style Pins1914200023 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item #23FP 0.091914200183 PIN Esco style pin, takes an 18-20LK lock; Use Item #18-20PN 0.09

1914210183 ROLL PINHensley style roll pin for a 156 series bucket tooth, this pin is 2" long and has a .375" pin diameter; Use Item #P156 0.04

Takeuchi Style Retainers1914200183 RUBBER LOCK Esco style rubber lock, takes an 18-20PN pin; Use Item #18-20LK 0.09Takeuchi Style Teeth

1914200182 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; Use Item #18TL 2.43

1914200230 DIRT TOOTH H&L style dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item #230 2.981914210182 DIRT TOOTH Hensley style dirt bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156 1.201914299142 TWIN TIGER TOOTH Hensley style twin tiger bucket tooth for a 156 series, takes a P156 roll pin; Use Item #X156WT 2.65

2412P641E1 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series, takes an 18-20PN pin and an 18-20LK lock; Use Item #18TL 2.43

U111500002 DIRT TOOTH H&L style dirt bucket tooth, takes a 2AP flex pin; Use Item #2AC 1.34

Terex Style PartsTerex Cutting Edges

4198855 CENTER EDGETerex style bolt on center cutting edge. This is a double beveled reversible bucket cutting edge that is .75" thick, 10" wide and 91.25" in length 180.78

9252042 CENTER EDGETerex style bolt on center cutting edge for a Terex Scraper. This is a double beveled reversible bucket cutting edge that is 1” thick, 16” wide and 28.42” in length. 61.30

Terex Style Pins9019777 FLEX PIN H&L style flex pin for a 270 series bucket tooth; Use Item # 27FP 0.209211361 FLEX PIN H&L style flex pin for a 25 series bucket tooth; Use Item #25FP 0.209243984 FLEX PIN H&L style flex pin for a 270 series bucket tooth; Use Item # 27FP 0.209360562 PIN Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.2015006895 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item # 23FP 0.0992113924 FLEX PIN Hensley style flex pin for a 200 series bucket tooth; Use Item # P162 0.20Terex Style Retainers


Terex Style Teeth9003922 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.069010794 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.069019778 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.169019779 DIRT TOOTH H&L style standard dirt bucket tooth for a 270 series, takes a 27FP flex pin; Use Item #270 8.169211362 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.069213933 DIRT TOOTH H&L style standard dirt bucket tooth for a 240 series, takes a 24FP flex pin; Use Item #240 4.199243922 DIRT TOOTH H&L style standard dirt bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250 7.069360560 FLARE TOOTH H&L style flare bucket tooth for a 250 series, takes a 25FP flex pin; Use Item #250F 6.8215006896 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.98

Volvo Style PartsVolvo Style Adapters

1071-01850 WELD ON ADAPTEREsco style weld-on adapter for an 18 series bucket tooth with a 3/4" lip thickness; Use Item # 1617-18 4.98

1071-02510 WELD ON ADAPTEREsco style weld-on adapter for a 35 series bucket tooth with a 1 1/2" lip thickness; Use Item # 157B-35 21.61

Volvo Style Cutting Edges

11045808 END EDGEVolvo style bolt on end cutting edge. This is a double bevel reversible bucket cutting edge that is 1" thick, 18.1563" wide and 24.563" in length. 118.61

11045809 CENTER EDGEVolvo style bolt on center cutting edge. This is a double bevel reversible cutting edge that is 1" thick, 13.78" wide and 63.94" in length. 233.00

11081065 CENTER EDGEVolvo style bolt on center cutting edge for a L150 Volvo Loader. This is a double beveled reversible bucket cutting edge that is 1 1 1/4” thick, 15” wide and 65.6” in length. 190.00

11081069 END EDGEVolvo style bolt on end cutting edge for a L150 Volvo Loader. This is a double beveled reversible bucket cutting edge that is 1 1 1/4” thick, 19” wide and 34” in length. 288.00


11082664-1 END EDGEVolvo style end edge for a L180 Loader. This is a double beveled reversible end edge that is 1.125" thick, 18.9" wide and 27.07" in length. 151.00

11082666-6 CENTER EDGEVolvo style center edge for a L180 Loader. This is a double beveled reversible center edge that is 1.125" thick, 14.96" wide and 71.57" in length. 315.00

11111775 END EDGEVolvo style bolt on end edge for a L150 Volvo Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.125” thick, 19” wide and 28.3” in length. 158.00

11111776 CENTER EDGEVolvo style bolt on center edge for a L150 Volvo Front End Loader. This is a double beveled reversible bucket cutting edge that is 1.125” thick, 15” wide and 77” in length. 337.00

11111885 END EDGEVolvo style bolt on end edge for a L150 Loader. This is a double beveled reversible end edge that is 1.25" thick, 18.898" wide and 26.181" in length. 150.00

11111886 CENTER EDGEVolvo style bolt on center edge for a L150 loader. This is a double beveled center edge that is 1.25" thick, 14.96" wide and 66.22" in length. 301.00

Volvo Grader Blades

75439 GRADER BLADECaterpillar style 5/8" x 6" x 7' curved, heat treated, 15 hole grader blade; takes 15 - 5/8" x 2 3/4" (625x275) plow bolts and 15 - 5/8" (625 hex nut) hex nuts 78.26

Volvo Style Pins1502964 PIN Esco style pin for a 45 series bucket tooth, takes a 45LK lock; Use Item #45PN 0.331502974 PIN Esco style pin for a 40 series bucket tooth, takes a 35-40LK lock; Use Item #40PN 0.571504272 PIN Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.201528526 PIN Esco style pin, takes an 18-20LK lock, Use Item #18-20PN 0.091542393 PIN Esco style pin for a 25 and a 30 series bucket tooth, takes a 25-30LK lock; Use Item #25-30PN 0.201545175 PIN Esco style pin for a 50 series bucket tooth, takes a 50LK lock; Use Item #50PN 0.79

1801985 RATCHET PIN Esco style ratchet pin for a 45 series bucket tooth, takes a 45LKR ratchet lock; Use Item #45PNR 0.701802026 PIN Esco style pin for a 56 series bucket tooth, takes a 56LK lock; Use Item #56PNP 1.7611079151 PIN Esco style V pin for a 27 series bucket tooth, takes a 27VPL plug; Use Item #27VPN 0.4412580973 PIN Esco style V pin for a 57 series bucket tooth, takes a 57VPL plug; Use Item #57VPN 0.5012580976 PIN Esco style V pin for a 47 series bucket tooth, takes a 47VPL plug; Use Item #47VPN 0.661071-00660 PIN Caterpillar style pin for a J550 series bucket tooth, takes an 8E5559 retainer; Use Item #1U1558 1.101071-01860 PIN Esco style pin, takes an 18-20LK lock; Use Item # 18-20PN 0.09

2520692 RATCHET PIN Esco style ratchet pin for a 50 series bucket tooth, takes a 50LKR ratchet lock; Use Item #50PNR 0.803677327 PIN Esco style pin for a 55 series bucket tooth, takes a 55LK lock; Use Item #55PN 0.998240-01400 FLEX PIN H&L style flex pin for a 230 series bucket tooth; Use Item # 23FP 0.09

961881 RATCHET PIN Esco style ratchet pin for a 40 series bucket tooth, takes a 40LKR ratchet lock; Use Item #40PNR 0.26Volvo Style Retainers1071-01870 RUBBER LOCK Esco style lock, takes an 18-20PN pin; Use Item # 18-20LK 0.0211079152 PLUG Esco style V plug for a 27 series bucket tooth, takes a 27VPN pin; Use Item #27VPL 0.1112580974 PLUG Esco style V plug for a 57 series bucket tooth, takes a 57VPN pin; Use Item #57VPL 0.1912580975 PLUG Esco style V plug for a 47 series bucket tooth, takes a 47VPN pin; Use Item #47VPL 1.001502965 RUBBER LOCK Esco style rubber lock for a 45 series bucket tooth, takes a 45PN pin; Use Item #45LK 0.111502973 RUBBER LOCK Esco style rubber lock for a 35 and a 40 series bucket tooth; Use Item #35-40LK 0.11


1528524 RUBBER LOCK Esco style rubber lock, takes an 18-20PN pin; Use Item #18-20LK 0.02

1542394 RUBBER LOCKEsco style rubber lock for a 25 and a 30 series bucket tooth; takes a 25-30PN pin; Use Item #25-30LK 0.02

1545176 RUBBER LOCK Esco style rubber lock for a 50 series bucket tooth, takes a 50PN pin; Use Item #50LK 0.44

1801986 RATCHET LOCK Esco style ratchet lock for a 45 series bucket tooth, takes a 45PNR ratchet pin; Use Item #45LKR 0.111802027 RUBBER LOCK Esco style rubber lock for a 56 series bucket tooth, takes a 56PNP pin; Use Item #56LK 0.901802376 LOCK Esco style horseshoe lock for a 21 series bucket tooth; Use Item #21LK 0.331802383 LOCK Esco style horseshoe lock for a 27 series bucket tooth; Use Item #27LK 0.401802390 LOCK Esco style horseshoe lock for a 37 series bucket tooth; Use Item #37LK 0.701802401 LOCK Esco style horseshoe lock for a 47 series bucket tooth; Use Item #47LK 0.79

2520693 RATCHET LOCKEsco style rubber ratchet lock for a 50 series bucket tooth, takes a 50PNR ratchet pin; Use Item #50LKR 0.15

2551626 LOCK Esco style horseshoe lock for a 57 series bucket tooth; Use Item #57LK 0.903677444 RUBBER LOCK Esco style rubber lock for a 55 series bucket tooth, takes a 55PN pin; Use Item #55LK 0.50

961882 RATCHET LOCKEsco style ratchet lock for a 35 and a 40 series bucket tooth, takes a 40PNR pin; Use Item #35-40LKR 0.11

Volvo Style Segments

11111761 SEGMENTVolvo style segment for a L150 Loader. This is a segment that is 1.125" thick, 15" wide and 13" long. 58.00

Volvo Style Teeth

1071-00460 DIRT TOOTHCaterpillar style standard, dirt bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer; Use Item # 1U3352 13.16

1071-02520 DIRT TOOTHEsco style conical, standard, dirt bucket tooth for a 35 series; takes a 35PN pin and a 35-40LK lock; Use Item # 35S 9.26

1071-02590 DIRT TOOTHEsco style conical, standard dirt bucket tooth for a 30 series; takes a 25-30PN pin and a 25-30LK lock; Use Item # 30S 5.95

12566084 ABRASION TOOTHEsco style abrasion bucket tooth for a 47 series, takes a 47VPN pin and a 47VPL plug; Use Item #47ARLB 43.00

12567136 DIRT TOOTHEsco style standard dirt bucket tooth for a 47 series, takes a 47LK horseshoe lock or a 47VPN pin and a 47VPL plug; Use Item #47SYL 23.81

1542261 DIRT TOOTHEsco style standard, conical dirt bucket tooth for a 30 series, takes a 25-30LK lock and a 25-30PN pin; Use Item #30S 5.95






1802374 DIRT TOOTHEsco style standard dirt bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item #21SYL 7.06

1802375 ROCK TOOTH Esco style rock bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item #21TG 6.501802397 ROCK TOOTH Esco style rock bucket tooth for a 47 series, takes a 47LK horseshoe lock; Use Item #47R 23.00

1802400 ABRASION TOOTHEsco style abrasion bucket tooth for a 47 series, takes a 47LK horseshoe lock; Use Item #47ARLB 43.00

1804010 ROCK TOOTH Esco style rock bucket tooth for a 47 series, takes a 47LK horseshoe lock; Use Item #47LP 19.001805081 ROCK TOOTH Esco style rock bucket tooth for a 21 series, takes a 21LK horseshoe lock; Use Item #21TG 6.502516568 ROCK TOOTH Esco style rock bucket tooth for a 55 series, takes a 55PN pin and a 55LK lock; Use Item #55LP 37.50

2561686 DIRT TOOTHEsco style SYL dirt bucket tooth for a 37 series, takes a 37LK horseshoe lock or a 37VPN pin and a 37VPL plug; Use Item #37SYL 15.87

2562141 DIRT TOOTHEsco style SYL dirt bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a 27VPL plug; Use Item #27SYL 9.26

2562273 TIGER TOOTHEsco style tiger bucket tooth for a 27 series, takes a 27LK horseshoe lock or a 27VPN pin and a 27VPL plug; Use Item #27VIP 9.47

8240-01410 DIRT TOOTH H&L style standard dirt bucket tooth for a 230 series, takes a 23FP flex pin; Use Item # 230 2.98

Wear BarsWear Bars

B107 WEAR BAR

Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 153mm (6") in length, 38mm (1 1/2") in width and 33mm (1 1/4") in height; same as DLP295 3.31

B202 WEAR BAR

Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 210mm (8 1/4") in length, 50mm (2") in width and 50mm (2") in height; same as DLP369 9.04

DLP184 WEAR BAR

Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 150mm (5.91") in length, 75mm (2.95") in width and 39mm (1.53") in height 7.49

DLP295 WEAR BAR

Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 153mm (6") in length, 38mm (1 1/2") in width and 33mm (1 1/4") in height; same as B107 3.31

DLP369 WEAR BAR

Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 210mm (8 1/4") in length, 50mm (2") in width and 50mm (2") in height; same as B202 9.04

SB409 WEAR BAR

Wear bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 154 mm (6.06") in length, 101 mm (3.98") in width, and 34 mm (1.34") in height 8.16

Wear ButtonsWear Buttons

WB115 WEAR BUTTON115mm (4 1/2" diameter) wear button, 700 brunell high chromium white iron with a weldable mild steel backing plate 4.80





WB90HD WEAR BUTTON

90mm (3 1/2" diameter) wear button, 700 brunell high chromium white iron with a weldable mild steel backing plate, this wear button is 1.75" tall, 1.36" thick of white iron and .39" thick of the mild steel backing plate 4.63

Wear PlatesWear Plates

MP2218 WEAR PLATE

Wear plate is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 200mm (8") in length, 200mm (8") in width, with an 18mm (3/4") thickness, 12mm on 6mm backing plate. 12.57

MP2220 WEAR PLATE

Wear plate is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 200mm (8") in length, 200mm (8") in width, with a 20mm (7/8") thickness, 10mm on 10mm backing plate. 13.89

MP3318 WEAR PLATE

Wear plate is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 300mm (11 3/4") in length, 300mm (11 3/4") in width, with an 18mm (3/4") thickness, 12mm on 6mm backing plate 28.00

MP3320 WEAR PLATE

Wear plate is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. The dimensions are 300mm (11 3/4") in length, 300mm (11 3/4") in width, with a 20mm (7/8") thickness, 10mm on 10mm backing plate 31.15

Yanmar Style Parts

Romac Industrial Parts, Inc. Product CatalogItem # Item Name Description Wt. (lb.)Yanmar Style Pins172448-82580-1 PIN Esco style pin, takes an 18-20LK lock; Use Item # 18-20PN 0.09Yanmar Style Retainers172488-82590-1 RUBBER LOCK Esco style lock, takes an 18-20PN pin; Use Item # 18-20LK 0.02Yanmar Style Teeth

172448-82570-1 DIRT TOOTHEsco style standard dirt bucket tooth for an 18 series; takes an 18-20LK lock and an 18-20PN pin; Use Item # 18TL 2.43

SX211 UNITOOTHYanmar/Komatsu style unitooth with a .59" lip thickness and a 1.77" bolt hole spacing, center to center; takes 2 - 625x225 plow bolts and 2 - 625 hex nuts; Use Item #Y211 3.30

Y15 UNITOOTHKomatsu/Yanmar style unitooth with a .59" lip thickness and a 1.77" bolt hole spacing, center to center; takes 2 - 625x225 plow bolts and 2 - 625 hex nuts; Use Item # Y211 3.30

Y211 UNITOOTH Yanmar/Komatsu style unitooth, takes 2 - 625x225 plow bolts and 2 - 625 hex nuts 3.30

Y22 UNITOOTHYanmar/Komatsu style unitooth with a .83" lip thickness and a 1.76" bolt hole spacing, center to center; takes 2 - 625x225 plow bolts and 2 - 625 hex nuts 4.18

Y28 UNITOOTHKomatsu/Yanmar style unitooth with a .67" lip thickness and a 2.36" bolt hole spacing, center to center; takes 2 - 625x225 plow bolts and 2 - 625 hex nuts; Use Item # 20T-70-13130 5.38

Notes

2018 · table of contents by manufacturer adco 1 bobcat ... hensley style bolt on, excavator...

Documents