the mgc pro-2000 fire & gas detection control system is a distributed microprocessor based...
TRANSCRIPT
Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or omissions that may appear in this document. Except as permitted by license, no part of this publication may be reproduced, stored in a retrieval system, transmitted in any form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd.
Mircom™, MGC™, Secutron™, Summit™, Mircom Engineered Systems™, Mircom ES™ and U.E.C™ names and graphic design are the exclusive property of 7049587 Canada Ltd., used under licence by Mircom Technologies Ltd.
CORPORATE/CANADA
25 Interchange Way
Vaughan, Ontario
L4K 5W3
Tel: 888.660.4655
Fax: 888.660.4113
USA
4575 Witmer Industrial Estates
Niagara Falls, N.Y.
14305
Tel: 888.660.4655
Fax: 888.660.4113
INTERNATIONAL
25 Interchange Way
Vaughan, Ontario
L4K 5W3
Tel: 905.660.4655
Fax: 905.660.4113
www.mircomgroup.com
Corporate head office and manufacturing facility, Vaughan, Ontario, Canada
About the Mircom™ Group of Companies
The Mircom Group of Companies (MGC™) is North America’s largest independent designer, manufacturer and distributor of advanced Fire Detection & Alarm, Voice Evacuation & Communication Systems, and Controlled Access & Security Solutions, serving the global marketplace for over 20 years.
MGC owns the Mircom™, Secutron™, and Summit™ branded line of products. With corporate headquarters located in Toronto (Vaughan), Ontario, Canada and Niagara Falls, New York, U.S.A., MGC operates a dedicated network of sales and service branch offices throughout North America and abroad, under its Mircom Engineered Systems™ brand (Mircom ES™).
MGC Systems International Limited supports the sales and installation of MGC systems in more than 50 countries worldwide, with regional offices located in Mexico City, Mexico; Buenos Aires, Argentina; Bangalore, India; Dubai, UAE; and Singapore. Under its United Export Corporation (U.E.C.™) division, MGC distributes a broad range of exceptional fire protection equipment to more than 70 international markets.
MGC-PRO2000-BR_rev07/12
SEAMLESS INTEGRATION
• Analog addressable fire detection devices –
thermal, smoke and manual call points
• Addressable flame and gas sensors – IR, UV,
explosion proof and toxic gas sensors
• Audible and visual alarm indicators
• RS-485 communication with MODBUS protocol
replaces the traditional 4-20 mA and provides
two way communication
• Extensive diagnostic capabilities simplify maintenance
and calibration of gas transmitters
• Fully compliant with NFPA 72 requirements
• Approved for releasing service
FLEXIBILITY & RELIABILITY
• Closed loop communication
• Local panels may be used as local annunciators
• Graphic interface – geographic synoptic board
• Display unit
• Optional 100% redundancy
APPROVALS
• UL 864 rev.9
• ULC
• ABS
• USCG
• CCG
PROGRAMMING CAPABILIty
• Adjustable alarm set point
• Programmable logic for alarm annunciation, alarm
evacuation, smoke control and release of fire
extinguishing agent
• Centralized and/or distributed MODBUS Interface for
Distributed Control System (DCS) and/or Emergency
Shutdown System (ESS)
• Control of safety mimic matrix for fire & gas devices
• Local display of status for each field device
• Electrical isolation for loop circuits and serial interface
lines
• Hardwire capability for critical Emergency Shutdown
System (ESS) signals and functions
BUILDING A
MGC’S PRO-2000 SERIESAddressable gas, flame, smoke and thermal sensors are continuously monitored for alarm signals, malfunctions, open and/or short circuit conditions through a reliable and proven digital communication link. The operator is provided with analog values pertaining to combustible and toxic gas levels as well as the presence of a fire through the smoke or thermal sensors in the protected spaces.
Designed to interface with other systems through an RS-485 data highway and using a thoroughly proven MODBUS RtU and/or Bacnet Communication protocol the PRO-2000 links directly to any host computer, Distributed Control System (DCS) and/or Emergency Shutdown System (ESS).
Enhanced reliability against short circuit conditions and RS-485 Splitter Module provides complete isolation for power and communication lines alike.
Designed with safety and reliability in mind, the PRO-2000 affords end-users and operators continuous operation through protection against single-point-failure mode.
A self diagnostic feature minimizes trouble shooting problems and makes system integration an easy and simple process.
APPLICAtIONS
Hundreds of hazardous environments can benefit from
the versatility and flexibility of the PRO-2000 system. By
combining and integrating in a single package the
traditionally autonomous fire detection and PLC based
gas detection systems, PRO-2000 redefines the words
Safety, Reliability, and Confidence.
Applications Including:
• Liquid Propane Gas plants
• Aircraft hangars
• Power plants
• tank farms
• Offshore platforms
• Naval & marine vessels
• Chemical plants
• Refineries
• Oil Rig
• Military applications
• Agent releasing
The MGC PRO-2000 Fire & Gas Detection Control System is a distributed microprocessor based package, providing seamless integration of �re and gas detection within a single control panel.
Our team of engineers and specialists will work with you to design the most cost e�cient solution without compromising the protection of personnel, equipment and property.
Other Projects• Long-term care facilities • Manufacturing facilities• Government institutions• Schools and universities• Condominiums• Retail stores• Military bases• Restaurants• Refineries• Hospitals• Hotels
BUILDING B
BUILDING C
SEAMLESS INTEGRATION
• Analog addressable fire detection devices –
thermal, smoke and manual call points
• Addressable flame and gas sensors – IR, UV,
explosion proof and toxic gas sensors
• Audible and visual alarm indicators
• RS-485 communication with MODBUS protocol
replaces the traditional 4-20 mA and provides
two way communication
• Extensive diagnostic capabilities simplify maintenance
and calibration of gas transmitters
• Fully compliant with NFPA 72 requirements
• Approved for releasing service
FLEXIBILITY & RELIABILITY
• Closed loop communication
• Local panels may be used as local annunciators
• Graphic interface – geographic synoptic board
• Display unit
• Optional 100% redundancy
APPROVALS
• UL 864 rev.9
• ULC
• ABS
• USCG
• CCG
PROGRAMMING CAPABILIty
• Adjustable alarm set point
• Programmable logic for alarm annunciation, alarm
evacuation, smoke control and release of fire
extinguishing agent
• Centralized and/or distributed MODBUS Interface for
Distributed Control System (DCS) and/or Emergency
Shutdown System (ESS)
• Control of safety mimic matrix for fire & gas devices
• Local display of status for each field device
• Electrical isolation for loop circuits and serial interface
lines
• Hardwire capability for critical Emergency Shutdown
System (ESS) signals and functions
• Approved for releasing service• Approved for releasing service
FLELEXIBILITY & RELIABILITY
• Closed loop communication• Closed loop communication
• Local panels may be used as local annunciators• Local panels may be used as local annunciators
• Graphic interface – geographic synoptic board• Graphic interface – geographic synoptic board
• Display unit• Display unit
• Optional 100% redundancy• Optional 100% redundancy
APPROVALSAPPROVALS
• UL 864 rev.9• UL 864 rev.9
• ULC• ULC
• ABS• ABS
• USCG• USCG
• CCG• CCG
• Hardwire capability for critical Emergency Shutdown
System (ESS) signals and functions
BUILDING A
MGC’S PRO-2000 SERIESAddressable gas, flame, smoke and thermal sensors are continuously monitored for alarm signals, malfunctions, open and/or short circuit conditions through a reliable and proven digital communication link. The operator is provided with analog values pertaining to combustible and toxic gas levels as well as the presence of a fire through the smoke or thermal sensors in the protected spaces.
Designed to interface with other systems through an RS-485 data highway and using a thoroughly proven MODBUS RtU and/or Bacnet Communication protocol the PRO-2000 links directly to any host computer, Distributed Control System (DCS) and/or Emergency Shutdown System (ESS).
Enhanced reliability against short circuit conditions and RS-485 Splitter Module provides complete isolation for power and communication lines alike.
Designed with safety and reliability in mind, the PRO-2000 affords end-users and operators continuous operation through protection against single-point-failure mode.
A self diagnostic feature minimizes trouble shooting problems and makes system integration an easy and simple process.
APPLICAtIONS
Hundreds of hazardous environments can benefit from
the versatility and flexibility of the PRO-2000 system. By
combining and integrating in a single package the
traditionally autonomous fire detection and PLC based
gas detection systems, PRO-2000 redefines the words
Safety, Reliability, and Confidence.
Applications Including:
• Liquid Propane Gas plants
• Aircraft hangars
• Power plants
• tank farms
• Offshore platforms
• Naval & marine vessels
• Chemical plants
• Refineries
• Oil Rig
• Military applications
• Agent releasing
The MGC PRO-2000 Fire & Gas Detection Control System is a distributed microprocessor based package, providing seamless integration of �re and gas detection within a single control panel.
Our team of engineers and specialists will work with you to design the most cost e�cient solution without compromising the protection of personnel, equipment and property.
Other Projects• Long-term care facilities • Manufacturing facilities• Government institutions• Schools and universities• Condominiums• Retail stores• Military bases• Restaurants• Refineries• Hospitals• Hotels
BUILDING B
BUILDING C
Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or omissions that may appear in this document. Except as permitted by license, no part of this publication may be reproduced, stored in a retrieval system, transmitted in any form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd.
Mircom™, MGC™, Secutron™, Summit™, Mircom Engineered Systems™, Mircom ES™ and U.E.C™ names and graphic design are the exclusive property of 7049587 Canada Ltd., used under licence by Mircom Technologies Ltd.
CORPORATE/CANADA
25 Interchange Way
Vaughan, Ontario
L4K 5W3
Tel: 888.660.4655
Fax: 888.660.4113
USA
4575 Witmer Industrial Estates
Niagara Falls, N.Y.
14305
Tel: 888.660.4655
Fax: 888.660.4113
INTERNATIONAL
25 Interchange Way
Vaughan, Ontario
L4K 5W3
Tel: 905.660.4655
Fax: 905.660.4113
www.mircomgroup.com
Corporate head office and manufacturing facility, Vaughan, Ontario, Canada
About the Mircom™ Group of Companies
The Mircom Group of Companies (MGC™) is North America’s largest independent designer, manufacturer and distributor of advanced Fire Detection & Alarm, Voice Evacuation & Communication Systems, and Controlled Access & Security Solutions, serving the global marketplace for over 20 years.
MGC owns the Mircom™, Secutron™, and Summit™ branded line of products. With corporate headquarters located in Toronto (Vaughan), Ontario, Canada and Niagara Falls, New York, U.S.A., MGC operates a dedicated network of sales and service branch offices throughout North America and abroad, under its Mircom Engineered Systems™ brand (Mircom ES™).
MGC Systems International Limited supports the sales and installation of MGC systems in more than 50 countries worldwide, with regional offices located in Mexico City, Mexico; Buenos Aires, Argentina; Bangalore, India; Dubai, UAE; and Singapore. Under its United Export Corporation (U.E.C.™) division, MGC distributes a broad range of exceptional fire protection equipment to more than 70 international markets.
MGC-PRO2000-BR_rev07/12