01-33 dvp3005 eu

DVD VIDEO PLAYER DVP3005

User manual

Thank you for choosing Philips.

Need help fast?Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support

Important notes for users in theU.K.

Mains plugThis apparatus is fitted with an approved 13Amp plug. To change a fuse in this type of plugproceed as follows:

1 Remove fuse cover and fuse.

2 Fix new fuse which should be a BS1362 5 Amp,A.S.T.A. or BSI approved type.

3 Refit the fuse cover.

If the fitted plug is not suitable for your jackoutlets, it should be cut off and an appropriateplug fitted in its place.If the mains plug contains a fuse, this should havea value of 5 Amp. If a plug without a fuse is used,the fuse at the distribution board should not begreater than 5 Amp.

Note: The severed plug must be disposed to avoida possible shock hazard should it be inserted into a13 Amp jack elsewhere.

How to connect a plugThe wires in the mains lead are coloured withthe following code: blue = neutral (N),brown = live (L).

¶ As these colours may not correspond with thecolour markings identifying the terminals in yourplug, proceed as follows:– Connect the blue wire to the terminalmarked N or coloured black.– Connect the brown wire to the terminalmarked L or coloured red.– Do not connect either wire to the earthterminal in the plug, marked E (or e) or colouredgreen (or green and yellow).

Before replacing the plug cover, make certainthat the cord grip is clamped over the sheath ofthe lead - not simply over the two wires.

Copyright in the U.K.Recording and playback of material may requireconsent. See Copyright Act 1956 and ThePerformer’s Protection Acts 1958 to 1972.

CAUTIONUse of controls or adjustments orperformance of procedures otherthan herein may result in hazardousradiation exposure or other unsafeoperation.

VAROITUSMuiden kuin tässä esitettyjentoimintojen säädön tai asetustenmuutto saattaa altistaa vaarallisellesäteilylle tai muille vaarallisilletoiminnoille.

CAUTIONVISIBLE AND INVISIBLE LASERRADIATION WHEN OPEN.AVOID EXPOSURE TO BEAM.ADVARSELSYNLIG OG USYNLIGLASERSTRÅLING VED ÅBNINGUNDGÅ UDSÆTTELSE FOR STRÅLINGVARNINGSYNLIG OCH OSYNLIGLASERSTRÅLNING NÄR DENNA DELÄR ÖPPNAD BETRAKTA EJ STRÅLENVARO!AVATTAESSA OLET ALTTIINANÄKYVÄLLE JA NÄKYMÄTTÖMÄLLELASER SÄTEILYLLE. ÄLÄ KATSOSÄTEESEENVORSICHTGEFAHR VON SICHTBARER UNDUNSICHTBARER LASERSTRAHLUNGBEI GEÖFFNETEM GEHÄUSE.ATTENTIONRAYONNEMENT LASER VISIBLE ETINVISIBLE EN CAS D’OUVERTUREEXPOSITION DANGEREUSE AUFAISCEAU

This compact DVD player is inconformity with the EMC directiveand low-voltage directive.

The apparatus shall not be exposed to drippingor splashing and that no objects filled withliquids, such as vases, shall be placed onapparatus.

3

Index

Due to the inconsistency of disc formatsprovided by various disc manufacturers, yourDVD system may require a playabilityenhancement or upgrade. As DVD technologyadvances, these enhancements will becomecommon and will be easy to complete.Go to www.philips.com/support forsoftware upgrade.

DKAdvarsel: Usynlig laserstråling vedåbning når sikkerhedsafbrydere er udeaf funktion. Undgå utsættelse forstråling.

Bemærk: Netafbryderen er sekundærtindkoblet og ofbryder ikke strømmenfra nettet. Den indbyggede netdel erderfor tilsluttet til lysnettet så længenetstikket sidder i stikkontakten.

SKlass 1 laseraparatVarning! Om apparaten används påannat sätt än i denna bruksanvisningspecificerats, kan användaren utsättasför osynlig laserstrålning, somöverskrider gränsen för laserklass 1.

Observera! Stömbrytaren är sekundärtkopplad och bryter inte strömmen frånnätet. Den inbyggda nätdelen ärdärför ansluten till elnätet så längestickproppen sitter i vägguttaget.SFLuokan 1 laserlaiteVaroitus! Laitteen käyttäminen muullakuin tässä käyttöohjeessa mainitullatavalla saattaa altistaa käyttäjänturvallisuusluokan 1 ylittävällenäkymättömälle lasersäteilylle.Oikeus muutoksiin varataan. Laite eisaa olla alttiina tippu-ja roiskevedelle.

Huom. Toiminnanvalitsin on kytkettytoisiopuolelle, eikä se kytke laitetta irtisähköverkosta. Sisäänrakennettuverkko-osa on kytkettynäsähköverkkoon aina silloin, kun pistokeon pistorasiassa.

En

gli

s hS

we

dis

hIt

ali

an

oE

spa

ño

lF

ran

ça

isD

eu

t sc

hD

an

sk

English --------------------------------------- 6

Français ------------------------------------ 34

Deutsch ------------------------------------ 62

Español ------------------------------------ 90

Italiano ------------------------------------ 118

Swedish ----------------------------------- 146

Dansk -------------------------------------- 174

General Information

CAUTION(WARNING LOCATION: ON THEBACKPLATE OF THE SET)

NEVER MAKE OR CHANGECONNECTIONS WITH THEPOWER SWITCHED ON.

Manufactured under license from DolbyLaboratories. “Dolby”, “Pro Logic” and thedouble-D symbol are trademarks of DolbyLaboratories.

Laser safety

This unit employs a laser. Due to possibleeye injury, only a qualified service personshould remove the cover or attempt toservice this device.

NOTE:PICTURES SHOWN MAYBEDIFFERENT BETWEENCOUNTRIES.

LASERType Semiconductor laser

GaAlAsWave length 650 nm (DVD)

780 nm (VCD/CD)Output Power 7 mW (DVD)

10 mW (VCD/CD)Beam divergence 60 degree

For Customer Use:

Read carefully the information located atthe rear/bottom of your DVD VIDEOplayer and enter below the Serial No.Retain this information for futurereference.

Model No. DVP 3005Serial No. _______________

Environmental InformationAll unnecessary packaging has beenomitted. The packaging has been madeeasy to separate into two materials:cardboard (box, buffer) and polyethylene(bags, protective foam sheet).

Your DVD player consists of materialswhich can be recycled and reused ifdisassembled by a specialised company.Please observe the local regulationsregarding the disposal of packagingmaterials, exhausted batteries and oldequipment.

Specifications are subject to changewithout notice. Trademarks are theproperty of Koninklijke Philips ElectronicsN.V. or their respective owners.

This product incorporates copyrightprotection technology that is protected bymethod claims of certain U.S. patents andother intellectual property rights owned byMacrovision Corporation and other rightsowners. Use of this copyright protectiontechnology must be authorized byMacrovision Corporation, and is intendedfor home and other limited viewing usesonly unless otherwise authorized byMacrovision Corporation. Reverseengineering or disassembly is prohibited.

‘CONSUMERS SHOULD NOTE THAT NOTALL HIGH DEFINITION TELEVISION SETSARE FULLY COMPATIBLE WITH THISPRODUCT AND MAY CAUSE ARTIFACTSTO BE DISPLAYED IN THE PICTURE. INCASE OF 525 OR 625 PROGRESSIVE SCANPICTURE PROBLEMS, IT IS RECOMMENDEDTHAT THE USER SWITCH THECONNECTION TO THE ‘STANDARDDEFINITION’ OUTPUT. IF THERE AREQUESTIONS REGARDING OUR TV SETCOMPATIBILITY WITH THIS MODEL 525pAND 625p DVD PLAYER, PLEASE CONTACTOUR CUSTOMER SERVICE CENTER.’

En

gli

s h

5

Abkhazian 6566Afar 6565Afrikaans 6570Amharic 6577Arabic 6582Armenian 7289Assamese 6583Avestan 6569Aymara 6589Azerhaijani 6590Bahasa Melayu 7783Bashkir 6665Belarusian 6669Bengali 6678Bihari 6672Bislama 6673Bokmål, Norwegian 7866Bosanski 6683Brezhoneg 6682Bulgarian 6671Burmese 7789Castellano, Español 6983Catalán 6765Chamorro 6772Chechen 6769Chewa; Chichewa; Nyanja 7889 9072Chuang; Zhuang 9065Church Slavic; Slavonic 6785Chuvash 6786Corsican 6779Česky 6783Dansk 6865Deutsch 6869Dzongkha 6890English 6978Esperanto 6979Estonian 6984Euskara 6985�� 6976Faroese 7079Français 7082Frysk 7089Fijian 7074Gaelic; Scottish Gaelic 7168Gallegan 7176Georgian 7565Gikuyu; Kikuyu 7573Guarani 7178Gujarati 7185Hausa 7265Herero 7290Hindi 7273Hiri Motu 7279Hrwatski 6779Ido 7379Interlingua (International)7365Interlingue 7365Inuktitut 7385

Inupiaq 7375Irish 7165Íslenska 7383Italiano 7384Ivrit 7269Japanese 7465Javanese 7486Kalaallisut 7576Kannada 7578Kashmiri 7583Kazakh 7575Kernewek 7587Khmer 7577Kinyarwanda 8287Kirghiz 7589Komi 7586Korean 7579Kuanyama; Kwanyama 7574Kurdish 7585Lao 7679Latina 7665Latvian 7686Letzeburgesch; 7666Limburgan; Limburger 7673Lingala 7678Lithuanian 7684Luxembourgish; 7666Macedonian 7775Malagasy 7771Magyar 7285Malayalam 7776Maltese 7784Manx 7186Maori 7773Marathi 7782Marshallese 7772Moldavian 7779Mongolian 7778Nauru 7865Navaho; Navajo 7886Ndebele, North 7868Ndebele, South 7882Ndonga 7871Nederlands 7876Nepali 7869Norsk 7879Northern Sami 8369North Ndebele 7868Norwegian Nynorsk; 7878Occitan; Provencal 7967Old Bulgarian; Old Slavonic 6785Oriya 7982Oromo 7977Ossetian; Ossetic 7983Pali 8073Panjabi 8065Persian 7065Polski 8076Português 8084

Pushto 8083Russian 8285Quechua 8185Raeto-Romance 8277Romanian 8279Rundi 8278Samoan 8377Sango 8371Sanskrit 8365Sardinian 8367Serbian 8382Shona 8378Shqip 8381Sindhi 8368Sinhalese 8373Slovensky 8373Slovenian 8376Somali 8379Sotho; Southern 8384South Ndebele 7882Sundanese 8385Suomi 7073Swahili 8387Swati 8383Svenska 8386Tagalog 8476Tahitian 8489Tajik 8471Tamil 8465Tatar 8484Telugu 8469Thai 8472Tibetan 6679Tigrinya 8473Tonga (Tonga Islands) 8479Tsonga 8483Tswana 8478Türkçe 8482Turkmen 8475Twi 8487Uighur 8571Ukrainian 8575Urdu 8582Uzbek 8590Vietnamese 8673Volapuk 8679Walloon 8765Welsh 6789Wolof 8779Xhosa 8872Yiddish 8973Yoruba 8979Zulu 9085

Language Code

En

glish

6

Language Code .......................... 5

IntroductionSupplied accessories ....................................... 8Care and safety information .......................... 8

ConnectionsConnecting TV ............................................ 9-10

Using SCART jack ........................................... 9Using Composite Video jacks (CVBS) ........ 9Using Component Video jacks (Pr Pb Y) . 10Using an accessory RF modulator ............ 10

Connecting the power cord ........................ 11Optional: Connecting to an Audio System .............................................................................. 12

Stereo system has Dolby Pro Logic or Right/ Left Audio In jack ....................................... 12

Optional: Connecting Digital AV Receiver .............................................................................. 12

Receiver has a PCM, Dolby Digital, orMPEG2 decoder ............................................ 12

Functional OverviewFront and Rear Panels .................................. 13Remote Control ............................................ 14

Getting StartedStep 1: Inserting batteries into theRemote Control ............................................ 15

Using the Remote Control to operate thePlayer ............................................................... 15

Step 2: Setting up the TV ........................ 15-17Setting up Progressive Scan feature (forProgressive Scan TV only) ........................... 16To deactivate Progressive manually .......... 17Selecting the colour system thatcorresponds to your TV .............................. 17

Step 3: Setting language preference ........... 18Setting the OSD Language .......................... 18Setting the Audio, Subtitle and Disc menulanguage .......................................................... 18

Disc OperationsPlayable Discs ................................................. 19Region Codes ................................................. 19Playing discs ..................................................... 19Basic playback controls ................................. 20Selecting various repeat/shuffle functions 20

Repeat play mode ......................................... 20Repeating a section within a chapter/track .......................................................................... 20

Operations for video playback ................... 21Using the Disc Menu .................................... 21Zooming in ..................................................... 21Resuming playback from the last stoppedpoint ................................................................ 21Slow motion ................................................... 21OSD (On-Screen Display) .......................... 21

Special DVD features .................................... 22Playing a Title ................................................. 22Camera Angle ................................................ 22Changing the Audio Language .................... 22Subtitles .......................................................... 22

Special VCD & SVCD Features ................... 22Playback Control (PBC) .............................. 22

Playing MP3/JPEG (Kodak) Picture CD ..... 23General Operation ....................................... 23Playback selection ......................................... 23Repeat ............................................................. 23Fast Forward/Reverse (MP3) ..................... 23

Contents

En

gli

s h

7

Contents

DVD Setup Menu OptionsGeneral Setup menu ..................................... 24

Dimming player’s display panel .................. 24OSD Language ............................................... 24Sleep ................................................................ 24Screen Saver - turning on/off ..................... 24

Audio Setup Menu ......................................... 25Setting the Downmix ................................... 25Digital Audio Setup ....................................... 25

Video Setup Menu ................................... 26-27TV Type ........................................................... 26Setting the TV Display ................................. 26Progressive - turning on/off ........................ 27Sharpness ........................................................ 27Brightness/Contrast ..................................... 27Switching the YUV/RGB .............................. 27

Preference Page ........................................ 28-29Audio, Subtitle, Disc Menu .......................... 28Restricting playback by Parental Control .............................................................................. 28Changing the Password ............................... 29Restoring to original settings ..................... 29

Troubleshooting ......................... 30–31

Specifications ...................................... 32

Glossary ......................................................................33

En

glish

8

Supplied accessories

Remote Controlandtwo AA batteries

Introduction

Care and safety information� Power consumption

– When the system is switched toStandby mode, it is still consuming power.To disconnect the system from the powersupply completely, remove the AC powerplug from the wall jack.

� Avoid high temperatures, moisture,water and dust– Do not expose the player, batteries ordiscs to humidity, rain, sand or excessiveheat (caused by heating equipment ordirect sunlight.)

PREVIEWPREVIEW MUTEMUTE

� Avoid condensation problem– The lens may cloud over when theplayer is suddenly moved from cold towarm surroundings, making it impossibleto play a disc. Leave the player in thewarm environment until the moistureevaporates.

� Do not block the vents– Do not operate the DVD Player in anenclosed cabinet, allow about 10 cm (4inches) of free space all around the playerfor adequate ventilation.

10 cm(4 inches)

10 cm(4 inches)

10 cm(4 inches)

PHILIPS

� Care of the cabinet– Use a soft cloth slightly moistened witha mild detergent solution. Do not use asolution containing alcohol, spirits,ammonia or abrasives.

� Finding a suitable location– Place the player on a flat, hard, andstable surface.

� Disc handling– To clean a CD, wipe it in astraight line from the centertowards the edge using a soft,lint-free cloth. A cleaningagent may damage the disc!– Write only on the printedside of a CDR(W) and only with a soft felt-tipped pen.– Handle the disc by its edge, do nottouch the surface.

En

gli

s h

9

Connections

Connecting TV

Using Composite Video jacks(CVBS)

1 Use the composite video cable (yellow) toconnect the DVD Player’s CVBS (VIDEO)jack to the video input jack (or labeled asA/V In, Video In, Composite or Baseband)on the TV (cable not supplied).

2 To hear the sound of this DVD Playerthrough your TV, use the audio cables(white/red) to connect AUDIO OUT(L/R) jacks of the DVD Player to thecorresponding AUDIO IN jacks on the TV(cable not supplied).

AUDIO

OUT

DIGITAL

OUT

CVBS

VIDEO

OUT

AUDIO IN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

21

IMPORTANT!– You only need to make one videoconnection from the followingoptions, depending on thecapabilities of your TV system.– Connect the DVD Player directlyto the TV.– SCART connection will let youuse the features of both the Audioand Video in the DVD Player.

Using SCART jack

� Use the SCART cable (black) to connectthe DVD Player’s SCART jack (TV OUT)to the corresponding Scart input jacks onthe TV (cable not supplied).

Helpful Hint:– Ensure that the “TV” indication onSCART cable is connected to the TVset and “DVD” indication on SCARTcable is connected to the DVD Player.

AUDIO

OUT

DIGITAL

OUT

CVBS

VIDEO

OUT

AUDIO IN

S-VIDEOIN

VIDEO IN

TV IN

AUDIO IN

S-VIDEOIN

VIDEO IN

TV IN

1

En

glish

10

AUDIO

OUT

DIGITAL

OUT

CVBS

VIDEO

OUT

AUDIO IN

R LVIDEO

INTO TVINT IN

CH3 CH4

2

1

Connections

IMPORTANT!– If your TV only has a singleAntenna In jack (or labeled as 75ohm or RF In,) you will need an RFmodulator in order to view the DVDplayback on the TV. See yourelectronics retailer or contactPhilips for details on RF modulatoravailability and operations.

Using an accessory RF modulator

1 Use the composite video cable (yellow) toconnect the DVD Player’s CVBS jack tothe video input jack on the RF modulator.

2 Use the RF coaxial cable (not supplied) toconnect the RF modulator to your TV’sRF jack.

RF coaxial cable to TV

Back of RF Modulator(example only)

Antenna orCable TV signal

AUDIO

OUT

DIGITAL

OUT

CVBS

VIDEO

OUT

AUDIO IN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

2 1

IMPORTANT!– The progressive scan videoquality is only possible when using YPb Pr and a progressive scan TV isrequired.

Using Component Video jacks(Y Pb Pr)

1 Use the component video cables (red/blue/green) to connect the DVD system’sY Pb Pr jacks to the correspondingComponent video input jacks (or labeledas Y Pb Pr) on the TV (cable not supplied).

2 To hear the sound of this DVD Playerthrough your TV, use the audio cables(white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to thecorresponding AUDIO IN jacks on the TV(cable not supplied).

3 Proceed to page 16 for detailedProgressive Scan set up.

En

gli

s h

11

After everything is connectedproperly, plug in the AC power cordto the power outlet.Never make or change any connectionswith the power switched on.

When no disc is loaded, pressSTANDBY ON on the DVD Playerfront panel,“NO DISC” may appear on thedisplay panel.

Connecting the power cord

NO DISC

AUDIO

OUT

DIGITAL

OUT

~ AC MAINS

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

Connections

En

glish

12

Connections

Stereo system has Dolby Pro Logicor Right / Left Audio In jack

1 Select one of the video connections(CVBS VIDEO IN or COMPONENTVIDEO IN) depending on the optionsavailable on your TV.

2 Use the audio cables (white/red) toconnect AUDIO OUT (L/R) jacks ofthe DVD Player to the correspondingAUDIO IN jacks on the stereo system(cable not supplied).

Optional: Connecting to anAudio System

Optional: Connecting Digital AVReceiver

Receiver has a PCM, Dolby Digital,or MPEG2 decoder

1 Select one of the video connections(CVBS VIDEO IN or COMPONENTVIDEO IN) depending on the optionsavailable on your TV.

2 Connect the COAXIAL jack of the DVDPlayer to the corresponding Digital AudioIn jack on your Receiver (cable notsupplied).

3 Set the DVD Player’s Digital Output toPCM-ONLY or ALL depending on thecapabilities of your Receiver (see page 25“Digital Output”).

Helpful Hint:– If the audio format of the Digital Outputdoes not match the capabilities of yourreceiver, the receiver will produce a strong,distorted sound or no sound at all.

AUDIO

OUT

DIGITAL

OUT

CVBS

VIDEO

OUT

AUDIO IN

STEREO

DIGITAL

AUDIO

OUT

DIGITAL

OUT

CVBS

VIDEO

OUT

AUDIO IN

DIGITAL

AV Receiver

En

gli

s h

13

Functional Overview

Front and Rear Panels

T NEXT– To select next chapter or track

IR Sensor– Point the remote control towards this

sensor

9 STOP– To stop playback

2; PLAY– To start or interrupt playback

PREV S– To select previous chapter or track

STANDBY-ON B– To switch the DVD Player to Standby

mode or ON

Disc tray

OPEN/CLOSE /– Open/Close the disc tray

Display– Shows the current status of the DVD

Player

Caution: Do not touch the inner pins of the jacks on the rear panel.Electrostatic discharge may cause permanent damage to the unit.

Scart (TV OUT)– Connect to Scart input of a TV

CVBS (VIDEO Out)– Connect to CVBS Video input of a TV

YPbPr (Component Video Out)– Connect to YPbPr input of a TV

AUDIO

OUT

DIGITAL

OUT

CVBS

VIDEO

OUT

Mains (AC Power Cord)– Connect to a standard AC outlet

Audio Out (Left/Right)– Connect to AUDIO inputs of an amplifier,

receiver or stereo system

COAXIAL (Digital audio out)– Connect to coaxial AUDIO input of a

digital audio equipment

En

glish

14

Functional Overview

Remote Control

PREVIEW MUTE

RETURN / TITLE– To go back to previous menu /

show title menu

DISC MENU– Enters or exits the disc contents

menu– Switches on or off the playback

control mode (for VCD version2.0 only)

1 2 3 4– Selects an item in the menu/

fast backward/forward, slow forward

OK– Acknowledge menu selection

S– To select previous chapter or track

STOP ( 9 )– To stop playback

PLAY ( B )– To start playback

PAUSE ( ; )– To pause playback temporarily /

frame-by-frame playback

REPEAT– Selects various repeat modes

REPEAT (A-B)– Repeats playback a specific section

on a disc

PREVIEW– Not applicable for this model

MUTE– Disables or enables sound output

POWER B– To switch the DVD player to

standby mode or ON

0-9 numerical key pad– Selects numbered items in a

menu

DISPLAY– Displays information on TV

screen during playback

SYSTEM MENU– Access or exit DVD Player’s

system menu

T– To select next chapter or track

SUBTITLE– To access subtitle language in disc

menu

ANGLE– Selects a DVD camera angle

ZOOM– Enlarge a picture on the TV

screen

AUDIO– To access audio language in disc

menu

En

gli

s h

15

PREVIEWPREVIEW MUTEMUTE

Getting Started

Step 1: Inserting batteries intothe Remote Control

1

3

2

1 Open the battery compartment.

2 Insert two batteries type R06 or AA,following the indications (+-) insidethe compartment.

3 Close the cover.

Using the Remote Control tooperate the Player

1 Aim the Remote Controldirectly at the remotesensor (IR) on the frontpanel.

2 Do not put any objectsbetween the RemoteControl and the DVDPlayer while operating theDVD Player.

CAUTION!– Remove batteries if they areexhausted or if the Remote Controlis not being used for a long time.– Do not use old and new ordifferent types of batteries incombination.– Batteries contain chemicalsubstances, so they should bedisposed properly.

Step 2: Setting up the TV

IMPORTANT!Make sure you have completed allthe necessary connections. (Seepages 9-10 “Connecting TV”).

1 Turn on the TV and set to the correctvideo-in channel. You should see thePhilips DVD background screen on theTV.

2 Usually these channels are between thelowest and highest channels and may becalled FRONT, A/V IN, or VIDEO. See yourTV manual for more details.➜ Or, you may go to channel 1 on yourTV, then press the Channel down buttonrepeatedly until you see the Video Inchannel.➜ Or, the TV Remote Control may have abutton or switch that chooses differentvideo modes.➜ Or, set the TV to channel 3 or 4 if youare using an RF modulator.

3 If you are using external equipment, (eg.audio system or receiver), turn it on andselect the appropriate input source forthe DVD Player output. Refer to theequipment owner’s manual for detail.

En

glish

16

Getting Started

Setting up Progressive Scan feature(for Progressive Scan TV only)

The progressive scan display twice thenumber of frames per seconds thaninterlaced scanning (ordinary normal TVsystem). With nearly double the numberof lines, progressive scan offers higherpicture resolution and quality.

IMPORTANT!Before enabling the progressive scanfeature, you must ensure:1) Your TV can accept progressive signals,

a progressive scan TV is required.2) You have connected the DVD player to

your TV using Y Pb Pr (see page 10.)

1 Turn on your TV.

2 Turn off your TV progressive scan modeor turn on interlaced mode (refer to yourTV user manual.)

3 Press POWER on the remote control toturn on the DVD player.

4 Select the correct Video Input channel.(See page 15).➜ The DVD background screen appearson the TV.

5 Press SYSTEM MENU.

6 Press 2 repeatedly to select {VIDEOSETUP PAGE}.

General Audio Video Preference

TY Type

TV Display

Progressive On

Sharpness Off

Brightness

Contrast

Component

- - Video Setup Page - -

7 Select {COMPONENT} to {YUV}, thenpress OK to confirm.

8 Select {PROGRESSIVE} to {ON}, then OKto confirm.➜ The instruction menu appears on theTV.

1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.

2. CONNECT USING YPBPR (GBR) VIDEO CABLE.

3. IF THERE IS DISTORTED PICTURE,

CancelOK

ACTIVATING PROGRESSIVE SCAN:

WAIT 15 SECONDS FOR AUTO RECOVERY.

9 Press 1 to highlight OK in the menuand press OK to confirm.

There will be a distorted picture onyour TV at this state until you turnon the progressive scan mode onyour TV.

0 Turn on your TV progressive scan mode(refer to your TV user manual.)➜ The below menu appears on the TV.

CONFIRM AGAIN TO USE PROGRESSIVE

SCAN. IF THE PICTURE IS GOOD,

PRESS OK BUTTON ON REMOTE.

CancelOK

! Press 1 to highlight OK in the menuand press OK to confirm.➜ The set up is complete now and youcan start enjoy the high quality picture.

TIPS: To return to the previous menu, press 1.To remove the menu, press SYSTEM MENU.

En

gli

s h

17

Selecting the colour system thatcorresponds to your TV

This DVD Player is compatible with bothNTSC and PAL. In order for a DVD discto play on this Player, the colour system ofthe Disc, the TV and the DVD Playershould match.


TY Type PAL

TV Display Multi

Progressive NTSC

Sharpness

Brightness

Contrast

Component



2 Press 2 repeatedly to select {VIDEOSETUP PAGE}.

3 Press 3 4 to highlight {TV TYPE}, thenpress 2.

Getting Started


4 Press 3 4 to highlight one of the optionsbelow:

PAL – Select this if the connected TV isPAL system. It will change the video signalof a NTSC disc and output in PAL format.

NTSC – Select this if the connected TVis NTSC system. It will change the videosignal of a PAL disc (VCD only) andoutput in NTSC format.

Multi – Select this if the connected TV iscompatible with both NTSC and PAL(multi-system). The output format will bein accordance with the video signal of thedisc.

5 Select an item and press OK.

Helpful Hints:– Before changing the current TVStandard setting, ensure that your TVsupports the ‘selected TV Type’ system.– If there is no proper picture onyour TV, wait for 15 seconds for autorecovery.

CHANGING PAL TO NTSC:

1. ENSURE THAT YOUR TV SUPPORTS

NTSC STANDARD.

2. IF THERE IS DISTORTED PICTURE

DISPLAYED ON THE TV, WAIT 15

SECONDS FOR AUTO RECOVERY.

CANCELOK

CONFIRM AGAIN TO USE NEW TV

TYPE SETTING.

CANCELOK

To deactivate Progressive manually

� When the distorted picture stillappears on the TV, it may be due tothe connected TV does not acceptprogressive signals, and progressive is setby mistake. You must reset the unit tointerlace format.

1 Turn off your TV progressive scan modeor turn on to interlaced mode (refer toyour TV user manual.)

2 Press OPEN/CLOSE on the DVD playerto open the disc tray.

3 Press numeric keypad ‘1’ on theremote control for few seconds.➜ The DVD blue background screenwill appear on the TV.

En

glish

18

Step 3: Setting languagepreference

You can select your preferred languagesettings. This DVD Player willautomatically switch to the language foryou whenever you load a disc.

Setting the OSD Language

The On-screen language for the systemmenu will remain as you set it, regardlessof various disc languages.

Display Dim

OSD Language ENGLISH

Sleep FRANÇAIS

Screen Saver DEUTSCH

NEDERLANDS

- - General Setup Page - -



2 Press 3 4 to highlight {OSDLANGUAGE}, then press 2.

3 Press 3 4 to select a language and pressOK.

Getting Started

Setting the Audio, Subtitle and Discmenu language

You can choose your own preferredlanguage or soundtrack from audio,subtitles and disc menu languages. If thelanguage selected is not available on thedisc, the disc’s default language will beused instead.


Audio English

Subtitle Chinese

Disc Menu French

Parental Spanish

Password Portuguese

Default Polish

Turkish

- - Preference Page - -

1 Press STOP twice then, press SYSTEMMENU.

2 Press 2 repeatedly to select{PREFERENCE PAGE}.

3 Press 3 4 to highlight one of the optionsbelow at a time, then press 2.– ‘Audio’ (disc’s soundtrack)– ‘Subtitle’ (disc’s subtitles)– ‘Disc Menu’ (disc’s menu)

4 Press 3 4 to select a language and pressOK.

If the language you want is not in thelist, then select {OTHERS},then use the numeric keypad (0-9) onthe remote to enter the 4-digit languagecode ‘XXXX’ (see page 5 “LanguageCode”) and press OK.

5 Repeat steps 3~4 for other languagesettings.


En

gli

s h

19

Disc Operations

IMPORTANT!– If the inhibit icon (ø) appears onthe TV screen when a button ispressed, it means the function is notavailable on the current disc or atthe current time.– Depending on the DVD or VIDEOCD, some operations may bedifferent or restricted.– Do not push on the disc tray orput any objects other than disc onthe disc tray. Doing so may causethe disc player malfunction.

Playable Discs

Your DVD Player will play:– Digital Versatile Discs (DVDs)– Video CDs (VCDs)– Super Video CDs (SVCDs)– Digital Video Discs +

Recordable[Rewritable] (DVD+R[W])– Compact Discs (CDs)– MP3 discs, picture (Kodak, JPEG) files

on CD-R(W).– JPEG/ISO 9660 format– Maximum 30 characters display.– Supported sampling frequencies :

32 kHz, 44.1 kHz, 48 kHz (MPEG-1)– Supported Bit-rates :

32~256 kbps (MPEG-1), variable bitrates

SUPER VIDEO

Region CodesDVD discs must be labeled for ALLregions or Region 2 in order toplay on this Player. You cannot playDiscs that are labeled for otherregions.

Helpful Hints:– It may not be possible to play CD-R/RWor DVD-R/RW in all cases due to the type ofdisc or condition of the recording.– If you are having trouble playing acertain disc, remove the disc and try adifferent one. Improper formatted disc willnot play on this DVD Player.

TIPS: The operating features described here might not be possible for certain discs. Always referto the instructions supplied with the discs.

Playing discs

1 Connect the power cords of the DVDPlayer and TV (and any optional stereo orAV receiver) to a power outlet.

2 Turn on the TV power and set to thecorrect Video In channel. (See page 15“Setting up the TV”).

3 Press STANDBY-ON on the DVD Playerfront panel.➜ You should see the Philips DVDbackground screen on the TV.

4 Press OPEN/CLOSE 0 button to openthe disc tray and load in a disc, then pressthe same button again to close the disctray.➜ Make sure the label side is facing up.For double-sided discs, load the side youwant to play facing up.

5 Playback will start automatically. If notpress PLAY B.➜ If a disc menu appears on the TV, seepage 21 “Using the Disc Menu”.

ALL

2

En

glish

20

Disc Operations

Basic playback controlsUnless otherwise stated, all operationsdescribed are based on Remote Controluse.

Pausing playback

1 During playback, press PAUSEÅ.➜ Playback will pause and sound will bemuted.

2 To resume normal playback, pressPLAY B.

Selecting track/chapter

1 Press T / S briefly during playbackto go to the next chapter/track or toreturn to the beginning of the currentchapter/track respectively.

2 To go directly to any chapter/track, enterthe chapter/track number using thenumerical keys (0-9).(e.g. single number of chapter/track withdigit ‘0’ in front, for example ‘06’)

� For DVD➜ Press S twice briefly to step backto the previous chapter/track.

� For VCD➜ It cannot work when PBC is set to‘ON’.

Searching backward/forward1 Press 1 2 during playback to select the

required speed: 2X, 4X, 8X, 16X or 32X(backward or forward).➜ Sound will be muted (DVD/VCD) orintermittent (CD).

2 To return to normal speed, press PLAY Bor OK.

Stopping playback� Press Ç.


Selecting various repeat/shufflefunctions

Repeat play mode

� Press REPEAT continuously to choose aRepeat mode during playback.

CHAPTER (DVD)– to repeat playback of the currentchapter.

TRACK/TITLE (SVCD/VCD/DVD)– to repeat playback of the currenttrack (SVCD/VCD)/title (DVD).

ALL– to repeat playback of the disc.

OFF– to cancel the repeat mode.

� Press REPEAT repeatedly to cancel therepeat mode.

Helpful Hint:– REPEAT function is not available for VCD2.0 when PCB is on.

Repeating a section within achapter/track

1 While playing a disc, press REPEAT A-Bat your chosen starting point.

2 Press REPEAT A-B again at your chosenend point.➜ The section will now repeatcontinuously.

3 To exit the sequence, press REPEATA-B.

En

gli

s h

21

Operations for video playback(DVD/VCD/SVCD)

Using the Disc Menu

Depending on the disc, a menu mayappear on the TV screen once you load inthe disc.

To select a playback feature or item� Use 1 2 3 4 keys or numeric keypad

(0-9) on the remote, then press OK tostart playback.

To access or remove the menu� Press DISC MENU on the remote.

Zooming in

This function allows you to enlarge thepicture on the TV screen and to panthrough the enlarged picture.

1 During playback, press ZOOMrepeatedly to display the picture withdifferent scales.➜ Use 1 2 3 4 keys to pan through theenlarged picture.➜ Playback will continue.

2 Press ZOOM repeatedly to return tothe original size.


Disc Operations

Resuming playback from the laststopped point

During playback, press STOP once (thedisc has not been ejected) to activate theresume mode.

� Press PLAY B.➜ Playback will start from the last stoppoint.

� Press STOP twice to cancel the resumemode.

Helpful Hint:– Resume option may not be available onsome discs.

Slow Motion

1 Press 3 during playback to select therequired speed: 1/2, 1/4, 1/8 or 1/16(forward).➜ Sound will be muted.

2 To return to normal speed, press PLAY B.

Helpful Hint:– Slow backward is not possible on VCDs.

OSD (On-Screen Display)

This function displays disc information onthe TV screen during playback.

1 During playback, press DISPLAYrepeatedly.➜ A list of available disc informationappears on the TV screen.

2 Use 1 2 keys to select an option.

3 Enter hours, minutes and seconds fromleft to right in the time edit box usingremote control numerical key pad.➜ Playback will change to the chosen timeor to the selected title/chapter/track.

For DVD➜ {Title CT:TT Chapter XX/TC}: displaysthe total available title and chapters in thedisc and enable to select a chapter forviewing.➜ {Title CT:TT Time X:XX:XX}: displaysthe total available title in the disc andenable to select the hour, minute andsecond of the title.➜ {Chapter CC:TC Time X:XX:XX}:displays the total available chapter in thedisc and enable to select the hour, minuteand second of the title.

For Super VCD or VCD➜ {Disc Go To XX:XX}: enable to selectany part within the disc.➜ {Track Go To XX:XX}: enable to selectany part within the current track.➜ {Select Track XX:TT}: enable to selectany track.

En

glish

22

Disc Operations

Special DVD Features

Playing a Title

1 Press DISC MENU.➜ The disc menu appears on the TVscreen.

2 Use 341 2 keys or numeric keypad(0-9) to select a play option.

3 Press OK key to confirm.

Camera Angle

� Press ANGLE repeatedly to selectdifferent desired angle.

Changing the Audio Language

For DVD

� Press AUDIO repeatedly to selectdifferent audio languages.

Changing the Audio Channel

For VCD

� Press AUDIO to select the availableaudio channels provided by the disc(MONO LEFT, MONO RIGHT, MIX-MONO, STEREO).

Subtitles

� Press SUBTITLE repeatedly to selectdifferent subtitle languages.

Special VCD & SVCD Features

Playback Control (PBC)

For VCD with Playback Control (PBC)feature (version 2.0 only)

� Press DISC MENU to toggle between‘PBC ON’ and ‘PBC OFF’.➜ If you select ‘PBC ON’, the disc menu(if available) will appear on the TV.➜ Use the S / T or the numerickeypad (0-9) to select a play option.

� During playback, pressing RETURN/TITLE will return to the menu screen (ifPBC is on).

If you want to skip the index menuand playback directly from thebeginning,

� Press DISC MENU key on the remotecontrol to switch to PBC off.


En

gli

s h

23

Disc Operations


Playing MP3/JPEG (Kodak)Picture CD

IMPORTANT!You have to turn on your TV and set tothe correct Video In channel. (See page15 “Setting up the TV”).

� Load a Picture disc (Kodak Picture CD,JPEG).➜ For Kodak disc, the slide show willbegin.➜ For JPEG disc, the picture menuappears on the TV screen. Press PLAY Bto start the slide-show playback.

General Operation

1 Load an MP3/JPEG Picture CD disc.➜ The data disc menu appears on the TVscreen.

2 Press 3 4 to select the folder and pressOK to open the folder.

00:00 04:52 128Kbps002/020

Coco - Before

Coco - I love

Coco - Jazz

Coco - Hot spring

Coco - I believe

--

\ Coco Lee \

MP3

MP3

MP3

MP3

MP3

3 Press 3 4 or use the numeric keypad(0-9) to highlight an option.

4 Press OK to confirm.➜ Playback will start from the selectedfile to the end of the folder.

Playback selection

During playback, you can;

� Press S / T to select another track/file in the current folder.

� Press ; / B repeatedly to pause/resumeplayback.

Repeat

� Press REPEAT continuously to accessdifferent ‘Play Mode’.

In STOP mode (folder view),™ SINGLE™ REPEAT ONE™ REPEAT FOLDER™ FOLDER™ SHUFFLE

In PLAY mode,™ SINGLE™ REPEAT ONE™ REPEAT ALL™ REPEAT OFF™ SHUFFLE

Fast forward / reverse (MP3)

� During playback, press 1 2 to fast forwardor reverse playback.

� To resume normal playback, press PLAYB.

En

glish

24

DVD Setup Menu Options


Dimming player’s display panel

You can select different levels ofbrightness for the display screen.

1 In ‘GENERAL SETUP PAGE’, press 3 4 tohighlight {DISPLAY DIM}, then press 2.

100%Select this for full brightness.

70%Select this for medium brightness.

40%Select this for dimming the display.

2 Press 3 4 to select a setting, then pressOK to confirm your selection.

This DVD Player setup is carried out viathe TV, enabling you to customise theDVD Player to suit your particularrequirements.

General Setup menu

1 In disc mode, press SYSTEM MENU.

2 Press 1 2 to select ‘General Setup’ icon.

3 Press OK to confirm.

Display Dim

OSD Language

Sleep

Screen Saver

- - General Setup Page - -


OSD Language

This menu contains various languageoptions for display language on the screen.For details, see page 18.

Sleep

Sleep function allows you to turn off theDVD Player automatically after a presettime.

1 In ‘GENERAL SETUP PAGE’, press 3 4 tohighlight {SLEEP}, then press 2.

15 MinsTurn off the DVD Player after 15 minutes.




OFFTurn off the sleep function.


Screen Saver - turning on/off

The screen saver will help to prevent yourTV display device from becomingdamaged.

1 In ‘GENERAL SETUP PAGE’, press 3 4 tohighlight {SCREEN SAVER}, then press 2.

ONSelect this if you wish to turn off the TVscreen when disc playback is stopped orpaused for more than 15 minutes.

OFFSelect this to disable the screen saverfunction.


En

gli

s h

25



Audio Setup Menu


2 Press 1 2 to select ‘Audio Setup’ icon.



Downmix

Digital Audio

- - Audio Setup Page - -

Setting the Downmix

This options allows you to set the stereoanalog output of your DVD Player.

1 In ‘AUDIO SETUP PAGE’, press 3 4 tohighlight {DOWNMIX}, then press 2.

LT/RTSelect this option if your DVD Player isconnected to a Dolby Pro-Logic decoder.

STEREOSelect this to change channel output tostereo which delivers sound from only thetwo front speakers.


Digital Audio Setup

The options included in Digital AudioSetup are: ‘Digital Audio’ and ‘LPCM’.

1 In ‘AUDIO SETUP PAGE’, press 3 4 tohighlight {DIGITAL AUDIO}, then press 2.

2 Press the 3 4 keys to highlight an option.

3 Enter its submenu by pressing 2.

4 Move the cursor by pressing the 3 4keys to highlight the selected item.

Digital OutputSet the Digital output according to youroptional audio equipment connection.➜ All: If you have connected yourDIGITAL AUDIO OUT to a multi-channeldecoder/receiver.➜ PCM Only: Only if your receiver isnot capable of decoding multi-channelaudio.

Helpful Hints:– If DIGITAL AUDIO is set to ‘All’, all audiosettings except MUTE are invalid.

LPCM Output

If you connect the DVD Player to a PCMcompatible receiver via the digitalterminals, such as coaxial or optical etc,you may need to adjust ‘LPCM’.Discs are recorded at a certain samplingrate. The higher the sampling rate, thebetter the sound quality.

➜ 48k: Playback a disc recorded at thesampling rate of 48kHz.➜ 96k: Playback a disc recorded at thesampling rate of 96kHz.

En

glish

26

Setting the TV Display

Set the aspect ratio of the DVD Playeraccording to the TV you have connected.The format you select must be availableon the disc. If it is not, the setting for TVdisplay will not affect the picture duringplayback.

1 In ‘VIDEO SETUP PAGE’, press 34 tohighlight {TV DISPLAY}, then press 2.

2 Press 3 4 to highlight one of the optionsbelow:

4:3 PAN SCAN –Select this if you havea normal TV and wantboth sides of thepicture to be trimmed or formatted to fityour TV screen.

4:3 LETTER BOX –Select this if you have anormal TV. In this case, awide picture with blackbands on the upper and lower portions ofthe TV screen will bedisplayed.

16:9 – Select this ifyou have a wide-screen TV.

3 Select an item and press OK.



Video Setup Menu


2 Press 1 2 to select ‘Video Setup’ icon.



TY Type

TV Display

Progressive

Sharpness

Brightness

Contrast

Component


TV Type

This menu contains the options forselecting the colour system that matchesthe connected TV. For details, see page17.

En

gli

s h

27



Sharpness

You can personalize your picture colourby adjusting sharpness.

1 In ‘VIDEO SETUP PAGE’, press 3 4 tohighlight {SHARPNESS}, then press 2.

HIGHChoose high to make the picture’s edgesharper.

MEDIUMChoose medium to get a standardpicture.

LOWChoose low to make the picture’s edgesofter.


Brightness / Contrast

Increasing the value will brighten thepicture or vice versa. Choose zero (0) foraverage setting.

1 In ‘VIDEO SETUP PAGE’, press 3 4 tohighlight {BRIGHTNESS} or{CONTRAST}, then press 2.➜ The menu appears.

Brightness 0

Contrast 0

2 Press 1 2 to adjust the setting that bestsuit your personal preference.


Progressive - turning on/off

In the progressive scan mode, you canenjoy the high quality picture with lessflickers. It only works when you haveconnected the DVD player’s Y Pb Pr jacksto your TV that supports the progressivevideo input. Otherwise, the a distortedpicture will appear on the TV. For properprogressive scan set up, see page 16.

1 In ‘VIDEO SETUP PAGE’, press 3 4 tohighlight {PROGRESSIVE}, then press 2.

ONTo enable Progressive Scan function.

OFFTo disable Progressive Scan function.

2 Press 3 4 to select a setting, then pressOK to confirm your selection.➜ Follow the instructions shown on theTV to confirm the selection (if any).➜ If a distorted picture appears on the TVscreen, wait for 15 seconds for autorecovery.

Switching the YUV/RGB

This setting allows you to toggle theoutput of the video signal between RGB(on scart) and Y Pb Pr (YUV).

1 In ‘VIDEO SETUP PAGE’, press 3 4 tohighlight {COMPONENT}, then press 2.

YUVSelect this for Y Pb Pr connection.

RGBSelect this for Scart connection.


Warning:– When the player is set to Y Pb Pr(YUV), some TV may not properlysynchronise with player on theSCART connector.– When RGB is selected,progressive scan output will bedeactivated.

En

glish

28



Preference Page

1 Press Ç twice to stop playback (if any),then press SYSTEM MENU.

2 Press 1 2 to select the ‘Preference Page’icon.



Audio

Subtitle

Disc Menu

Parental

Password

Default


Audio, Subtitle, Disc Menu

These menus contain various languageoptions for audio, subtitle and disc menuwhich may be recorded on the DVD. Fordetails, see page 18.

Restricting playback by ParentalControl

Some DVDs may have a parental levelassigned to the complete disc or tocertain scenes on the disc. This featurelets you set a playback limitation level.The rating levels are from 1 to 8 and arecountry dependent. You can prohibit theplaying of certain discs that are notsuitable for your children or have certaindiscs played with alternative scenes.

1 In ‘PREFERENCE PAGE’, press 34 tohighlight {PARENTAL}, then press 2.


Audio 1 KID SAFE

Subtitle 2 G

Disc Menu 3 PG

Parental 4 PG 13

Password 5 PGR

Default 6 R

7 NC17

8 ADULT


2 Press 34 to highlight a rating level for thedisc inserted and press OK.➜ To disable Parental controls and haveall Discs play, select {8 ADULT}.

3 Use the numeric keypad (0-9) to enterthe six-digit password (see page 29“Changing the password”).➜ DVDs that are rated above the levelyou selected will not play unless you enteryour six-digit password.

Helpful Hints:– VCD, SVCD, CD have no level indication,so parental control function has no effect onthese type of discs. This applies to most illegalDVD discs.– Some DVDs are not encoded with arating though the movie rating may beprinted on the Disc cover. The rating levelfeature does not work for such Discs.

En

gli

s h

29


Restoring to original settings

Setting the DEFAULT function will resetall options and your personal settings tothe factory defaults, except yourpassword for Parental Control.

1 In ‘PREFERENCE PAGE’, press 3 4 tohighlight {DEFAULT}, then press 2 toselect {RESET}.

2 Press OK to confirm.➜ All settings will now reset to factorydefaults.


Changing the Password

This feature is used for Parental Control.Enter your six-digit password whenprompted on the screen. The defaultpassword is 136900.

1 In ‘PREFERENCE PAGE’, press 3 4 tohighlight {PASSWORD}, then press 2 toselect {CHANGE}.


Old Password

New Password

Confirm PWD

OK

2 Use the numeric keypad (0-9) to enteryour old six-digit password.➜ When doing this for the first time, keyin ‘136900’.➜ If you forget your old six-digitpassword, key in ‘136 900’.

3 Enter the new six-digit password.

4 Enter the new six-digit password a secondtime to confirm.➜ The new six-digit password will nowtake effect.


En

glish

30

WARNINGUnder no circumstances should you try to repair the system yourself, as this willinvalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. Ifyou are unable to remedy a problem by following these hints, consult your dealer orPhilips for help.

Problem Solution

No power – Check if the AC power cord is properly connected.– Press the STANDBY ON on the front of the DVD

system to turn on the power.

No picture – Refer to your TV’s manual for correct Video Inchannel selection. Change the TV channel until yousee the DVD screen.

– Check if the TV is switched on.– If the progressive scan feature is activated but the

connected TV does not support progressive signalsor the cables are not connected accordingly, seepage 16 for proper progressive scan set up ordeactivate the progressive scan feature as below:

1) Turn off your TV progressive scan mode or turn onto interlaced mode.

2) Press OPEN/CLOSE to open the disc tray.3) Press numeric keypad ‘1’ on the remote control for

few seconds.

Distorted picture – Sometimes a small amount of picture distortion mayappear depending on the disc being played back. Thisis not a malfunction.

Completely distorted picture or – Connect DVD Player directly to the TV.black/white picture with DVD – Make sure the disc is compatible with the DVD/

Player.– Ensure that the DVD Player’s TV Type is set to match

that of the Disc and your TV.

No sound or distorted sound – Adjust the volume.– Check that the speakers are connected correctly.

No audio at digital output – Check the digital connections.– Check if your receiver can decode MPEG-2 and if

not, please make sure the digital output is set to ALL.– Check if the audio format of the selected audio

language matches your receiver capabilities.

Troubleshooting

Visit us at www.philips.com/support for service support

En

gli

s h

31

Disc can’t be played – The DVD+R/CD-R must be finalised.– Ensure the disc label is facing up.– Check if the disc is defective by trying another disc.– Region code incorrect.

Picture freezes momentarily – Check the disc for fingerprints/scratches andduring playback clean with a soft cloth wiping from centre to edge.

No return to start-up screen when – Reset the unit by switching the player off, then ondisc is removed again.

The player does not respond to – Aim the Remote Control directly at the sensorthe Remote Control on the front of the player.

– Reduce the distance to the player.– Replace the batteries in the Remote Control.– Re-insert the batteries with their polarities (+/–

signs) as indicated.

Buttons do not work – To completely reset the player, unplug the ACcord from the AC outlet for 15-20 seconds.

Player does not respond to some – Operations may not be permitted by the disc.operating commands during playback. Refer to the instructions of the disc jacket.

DVD Player cannot read – Use a commonly available cleaning CD/DVD toCDs/DVDs clean the lens before sending the DVD Player for

repair.

Menu items cannot be selected – Press STOP twice before selecting System Menu.– Depending on the disc availability, some menu items

cannot be selected.

Troubleshooting

Problem Solution

Visit us at www.philips.com/support for service support

En

glish

32

TV STANDARD (PAL/50Hz) (NTSC/60Hz)Number of lines 625 525Playback Multistandard (PAL/NTSC)

VIDEO PERFORMANCEDA Converter 12 bit, 108 mHzYPbPr 0.7 Vpp — 75 ohmVideo Output 1Vpp — 75 ohmRGB (SCART) 0.7 Vpp — 75 ohm

VIDEO FORMATDigital Compression MPEG 2 for DVD,SVCD

MPEG 1 for VCD

DVD 50Hz 60HzHoriz. resolution 720 pixels 720 pixelsVertical resolution 576 lines 480 lines

VCD 50Hz 60HzHoriz. resolution 352 pixels 352 pixelsVertical resolution 288 lines 240 lines

AUDIO FORMATDigital MPEG/ AC-3/ compressed Digital

PCM 16, 20, 24 bitsfs, 44.1, 48, 96 kHz

MP3(ISO 9660) 96, 112, 128, 256kbps & variablebit rate fs, 32, 44.1,48 kHz

Analog Sound StereoDolby Surround compatible downmix from Dolby Digitalmulti-channel sound

Specifications

AUDIO PERFORMANCEDA Converter 24 bit, 192 kHzDVD fs 96 kHz 4Hz- 44kHz

fs 48 kHz 4Hz- 22kHzSVCD fs 48 kHz 4Hz- 22kHz

fs 44.1kHz 4Hz- 20kHzCD/VCD fs 44.1kHz 4Hz- 20kHzSignal-Noise (1kHz) > 90 dBDynamic range(1kHz) > 90 dBCrosstalk (1kHz) > 80 dBDistortion/noise (1kHz) > 70 dBMPEG MP3 MPEG Audio L3

CONNECTIONSScart Output EuroconnectorYPbPr Output Cinch 3xVideo Output Cinch (yellow)Audio Output(L+R) Cinch (white/red)Digital Output 1 coaxial

IEC60958 for CDDA / LPCMIEC61937 for MPEG 1/2,Dolby Digital

CABINETDimensions (w x h x d) 360 x 37 x 265 mmWeight Approximately 2.0 kg

POWER CONSUMPTIONPower Supply Rating 230V; 50HzPower consumption < 10 WPower consumption in Standby mode < 0.8 W

Specifications subject to change without prior notice

En

gli

s h

33

Analog: Sound that has not been turned intonumbers. Analog sound varies, while digital sound hasspecific numerical values. These jacks send audiothrough two channels, the left and right.Aspect ratio: The ratio of vertical and horizontalsizes of a displayed image. The horizontal vs. verticalratio of conventional TVs. is 4:3, and that of wide-screens is 16:9.AUDIO OUT Jacks: Jacks on the back of the DVDSystem that send audio to another system (TV, Stereo,etc.).Bit Rate: The amount of data used to hold a givenlength of music; measured in kilobits per seconds, orkbps. Or, the speed at which you record. Generally,the higher the bit rate, or the higher the recordingspeed, the better the sound quality. However, higherbit rates use more space on a Disc.Chapter: Sections of a picture or a music piece on aDVD that are smaller than titles. A title is composedof several chapters. Each chapter is assigned a chapternumber enabling you to locate the chapter you want.Component Video Out Jacks: Jacks on the back ofthe DVD System that send high-quality video to a TVthat has Component Video In jacks (R/G/B, Y/Pb/Pr,etc.).Disc menu: A screen display prepared for allowingselection of images, sounds, subtitles, multi-angles, etcrecorded on a DVD.Digital: Sound that has been converted intonumerical values. Digital sound is available when youuse the DIGITAL AUDIO OUT COAXIAL orOPTICAL jacks. These jacks send audio throughmultiple channels, instead of just two channels asanalog does.Dolby Digital: A surround sound system developedby Dolby Laboratories containing up to six channelsof digital audio (front left and right, surround left andright, center and subwoofer).DTS: Digital Theatre Systems. This is a surroundsound system, but it is different from Dolby Digital.The formats were developed by different companies.JPEG: A very common digital still picture format. Astill-picture data compression system proposed by theJoint Photographic Expert Group, which features smalldecrease in image quality in spite of its highcompression ratio.

MP3: A file format with a sound data compressionsystem. “MP3” is the abbreviation of Motion PictureExperts Group 1 (or MPEG-1) Audio Layer 3. By usingMP3 format. one CD-R or CD-RW can contain about10 times as much data volume as a regular CD can.Multichannel: DVD is specified to have each soundtrack constitute one sound field. Multichannel refersto a structure of sound tracks having three or morechannels.Parental Control: A function of the DVD to limitplayback of the disc by the age of the users accordingto the limitation level in each country. The limitationvaries from disc to disc; when it is activated, playbackwill be prohibited if the software’s level is higher thanthe user-set level.PCM (Pulse Code Modulation): A system forconverting analog sound signal to digital signal forlater processing, with no data compression used inconversion.Playback control (PBC): Refers to the signalrecorded on video CDs or SVCDs for controllingreproduction. By using menu screens recorded on aVideo CD or SVCD that supports PBC, you can enjoyinteractive-type software as well as software having asearch function.Progressive Scan: It displays all the horizontal linesof a picture at one time, as a signal frame. This systemcan convert the interlaced video from DVD intoprogressive format for connection to a progressivedisplay. It dramatically increases the verticalresolution.Region code: A system for allowing discs to beplayed back only in the region designated beforehand.This unit will only play discs that have compatibleregion codes. You can find the region code of yourunit by looking on the product label. Some discs arecompatible with more than one region (or ALLregions).Title: The longest section of a picture or musicfeature on DVD, music, etc., in video software, or theentire album in audio software. Each title is assigned atitle number enabling you to locate the title you want.VIDEO OUT jack: Jack on the back of the DVDSystem that sends video to a TV.

Glossary

01-33 dvp3005 eu

Documents