01 blc720 spec - acuitybrandslighting.com · lcb 22ft linear plan winona offers the ability to...
TRANSCRIPT
IP66
Controller (Easyl™ Solo / Touch / Pro)DMX-Power Integrator (required for installation)Feed Cable (required for installation)Jumper Cable
See page 4See page 4See page 4See page 4
IntroductionPARATA 729W Series linear surface mount luminaires are designed to graze or wash exterior architectural features or facades with vibrant color. The PLS729W is available in 1ft, 2ft, 3ft, or 4ft lengths with various optics that provide the user exceptional beam control placing the light where it is required. Parata 729W Series linear surface mount luminaires produce best in class efficacy, producing 546 lumens per foot while consuming only 10.5 watts per foot. Each luminaire is factory calibrated for color consistency and specific CCT 2700K, 3000K, 3500K, or 4000K personalities may be selected for white light. Remote device management (RDM) capability allows bi-directional communication simplifying installation. Resolution can be field selected as per fixture or per foot.
Hit the Tab key or mouse over the page to see all interactive elements.
Project
QTY
Type
NOTES
Describe Modification: Accessories
PARĀTAPLS729W RGBLED Linear Surface
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
1
Rev. 04/23/15PLS729W_PARATA
© 2011-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
WIN NAsolutions forms light
®
Specifications
Width:
Height 1:
Height 2:
Height 3:
2-3/4"(70 mm)
3"(76 mm)
4-5/16"(110 mm)
4-1/16"(103 mm)
12-9/16"(319 mm)
24-3/8"(619 mm)
36-3/16"(919 mm)
48"(1219 mm)
3.5 lbs(1.6 kg)
7 lbs(3.2 kg)
10.5 lbs(4.8 kg)
14 lbs(6.4 kg)
700ADJ2 - Adjustable MountAdditional mountsshown on page 5Length/Weight:
700FMCMount
700ADJ1Mount
700ADJ2Mount
L
H3W
OW
H1 H2
W
WARRANTY5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C.Specifications subject to change without notice.
Ordering Information EXAMPLE: PLS729W LCB 20FT MSL4 700ADJ2 15DEG RGB MVOLT FCLP10A BKT
PLS729W
Parata RGB LED Linear Surface Wet
PLS729W Linear Center BalanceLinear Longest PossibleLinear Same Length
LCBLLPLSL
Series Linear Plan
1FT Section Length2FT Section Length3FT Section Length4FT Section Length
MSL1MSL2MSL3MSL4
Linear Plan
FT——
Total Run Length
NOFCLFCLP10AFCLP50A
No feed cable (order separate)10FT (1418) Feed Cable Linear Parata50FT (1418) Feed Cable Linear Parata
MOD Modification/Consult FactoryBKTWHTDBTSITCPF
Voltage Electrical Option Finish Special
MVOLT Multi Volt 120V thru 277V Black TexturedWhite TexturedDark Bronze TexturedSilver TexturedCustom Paint Finish
MVOLTRGB
RGB Color Changing
Source
15DEG55X15DEG60DEG70X40DEG
15 Degrees55 Degrees x 15 Degrees60 Degrees70 Degrees x 40 Degrees
Mounting Accessory Distribution
Adjustable Mount Hinge (700 Series)Adjustable Mount (700 Series)Fixed Mount (700 Series)
700ADJ1
700ADJ2
700FMC(See page 2 for definitions)
IES data is available at www.winonalighting.com. Always refer to our website for the latest IES file updates.
Test Report: BAL17329IES LM 79-08PLS729W MLS4 15DEG 30KLumens: 2,182Wattage: 42WEfficacy: 52.1Max. Candela: 15,225
15° DISTRIBUTION 60° DISTRIBUTION55° X 15° DISTRIBUTIONTest Report: BAL17330IES LM 79-08PLS729W MLS4 55X15DEG 30KLumens: 2,143Wattage: 42WEfficacy: 51.1Max. Candela: 5,318
70° X 40° DISTRIBUTIONTest Report: BAL17331IES LM 79-08PLS729W MLS4 70X40DEG 30KLumens: 2,113Wattage: 42WEfficacy: 50.4Max. Candela: 2,195
464
928
1392
1856
Test Report: BAL17332IES LM 79-08PLS729W MLS4 60DEG 30KLumens: 2,142Wattage: 42WEfficacy: 51.1Max. Candela: 1,856
Beam WidthCenter Beam fc
11' 6"
23' 1"
34' 7"
46' 2"
57' 8"
17.5 fc
4.6 fc
2.1 fc
1.2 fc
0.7 fc
10'
20'
30'
40'
50'
3806
7613
11419
15225
ISO Candela Plot
1330
2659
3989
5318
ISO Candela Plot
549
1098
1646
2195
ISO Candela Plot ISO Candela Plot
Beam WidthCenter Beam fc
3' 6"
7' 0"
10' 7"
14' 1"
17' 8"
10'
20'
30'
40'
50'
Illuminance at a DistanceBeam WidthCenter Beam fc
11' 6"
23' 1"
34' 7"
46' 2"
57' 8"
3' 6"
7' 1"
10' 7"
14' 1"
17' 8"
50.1 fc
13.2 fc
5.9 fc
3.3 fc
2.1 fc
10'
20'
30'
40'
50'
Illuminance at a Distance Illuminance at a DistanceBeam WidthCenter Beam fc
10'
20'
30'
40'
50'
Illuminance at a Distance
20.9 fc
5.5 fc
2.5 fc
1.4 fc
0.9 fc
102.0 fc
33.7 fc
16.0 fc
9.2 fc
6.0 fc
55° 15°11' 6"
23' 1"
34' 7"
46' 2"
57' 8"
5' 4"
10' 9"
16' 1"
21' 5"
26' 10"
70° 40°
Linear Plan
Peformance Data
Photometric Diagrams
Lumen OutputLumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representativeof the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end-user environment and application. Contact factory for performance data on any configurations not shown here.
48 42
1555 x 1570 x 40
60
15225531821951856
2182214321132142
52515051
16163962
16556961
364282109
3690126104
LEDs SystemWatts
NominalDistribution
FieldAngle
BeamAngle
RGB
Max Cd Lumens LPW
15˚
55˚
40˚
70˚
60˚15˚
Model
PLS729W MLS4PLS729W MLS3PLS729W MLS2PLS729W MLS1
Current (A)
SystemWatts (W) 120V 208V 240V 277V 347V 480V
4231.521
10.5
0.350.260.180.09
0.200.150.100.05
0.180.130.090.04
0.150.110.080.04
Electrical Load
----
----
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
2
Rev. 04/23/15PLS729W_PARATA
© 2011-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
WIN NAsolutions forms light
®
Lumens: 546 lm per foot (15° optic)
Wattage: 10.5w/ft
Efficacy: 52 LPW
Voltage: 120 - 277V
Distribution: 15°, 55° x 15°, 70° x 40°, 60°
Control System: Easyl DMX512 controller with LCD touchscreen
FEATURES & SPECIFICATIONSCertification/Compliance: 729W -ETL wet location, cETL, IP66
Weight: 12" - 3.5 lbs / 24" - 7 lbs / 36" - 10.5 lbs / 48" - 14 lbs
Warranty: 5 years
Assembled in America: Buy American Act Compliant
Lumen Maintenance: 50,000 hours L70 @ 40°C
Size: 2.75"W x 3"H
Housing: Extruded aluminum
Finish: Polyester powder coat painted finish
Lens Material: Extruded acrylic
Temperature Ranges: -20° to 40°C
2' 4' 4' 4' 4' 4'
4'4'4'4'4'
4' 4' 4' 4'3' 3'
LLP 22FT
LSL 20FT
LCB 22FT
Linear PlanWinona offers the ability to provide a continuous run plan to suit your requirements by optionally offering three methods of configuration.
LSL Linear Same Length: In this configuration each segment is the same length is standardized based on the longest length available and is the only option provided. Because it is dependent on one segment length there are mathematical limitations on what overall row lengths can be achieved. Example: 22 FT row would be achieved with (5) 4FT long segments equaling 20 FT (nominal).
LCB Linear Center Balanced:This configuration incorporates the longest center segment(s) along with any additional lengths required to fill located at each end. Example: 22FT row would have (2) 3FT segments (one at each end) and (4) 4FT intermediate segments located in between.
LLP Linear Longest Possible:In this plan the longest length available is optimized resulting in the fewest segments and mounting locations. Caution should be used where balanced appearance is a concern. Example: 22FT row would have (5) 4FT segments and (1) 2 FT segment located at one end.
The Easyl controller is a self-contained DMX controller providing one universe of DMX-512 control. A complete system RDM set-up and playback control solution, the Easyl includes:- Pre-loaded shows, random show, rainbow feature, and chase feature- On-screen manual color select with favorite presets store/recall- On-screen master intensity slider and speed control slider- Compatibility with RDM and non-RDM DMX-512 fixtures- All show editing done through LCD user interface- User-configurable logo on screen saver
Belden 9829 cable is the preferred communication/data cable used to carry the DMX signal to and from the PARATA luminaires. The total length of this cable must not exceed 1000 feet from the DMX controller to the last luminaire in the chain.
DPI box (Data Power Integration) is used to bundle DMX to line voltage and deliver them to the luminaire. This box provides necessary isolation between the DMX control and line voltage and is required for all PARATA installations. The DPI box also serves as a 4-channel splitter enabling up to 128 fixtures to be controlled from a single DPI box. Refer to installation instructions for dimensions and mounting details.
120V-277V input to DPI box. Metallic conduit and standard fittings are compatible as are multi-conductor cords provided they are appropriate to the mounting location.
Feed cable connects junction box with first fixture in a run. 14 ga. conductors carry power, shielded 18 ga. conductors carry data. Input end is stripped for connection to the junction box, output end includes a female plug forfixture connection. Also included with each feed cable is a sealing cap for the end of each run.(Contact factory for availability of custom feed cable lengths)
A maximum of 32 luminaires can be connected to a single output channel of the DPI box. The maximum length of cord and luminaire run combined is 1000' per DMX/RDM specification.
Power and Data can be run to junction box locations in rigid conduit. Use Belden 9829 for data and copper wire per local code for power. Use appropriate fitting for combination cord.
To ensure data integrity, a 120 Ohm termination resistor is required at the last luminaire in each run. See installation instructions.
A
B
C
D
E
F
G
H
This very basic system wiring diagram provides an overview of components and materials required for a simple dynamic color installation of PARĀTA luminaires controlled by an Easyl controller. These diagrams should not be used in place of actual installation instructions or submittal drawings prepared for a specific project.
Basic System Wiring Information
Easyl Controller
A dynamic color-changing luminaire installation can be as simple as a single luminaire and one control to many different luminaires in multiple locations being triggered and manipulated in real time. Consulting with the factory at the beginning stages of the project will ensure the required equipment be specified and properly installed.
Power & DMX Connection in DPI Box
F
H120-277V
A
E
G
D
B
C
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
3
Rev. 04/23/15PLS729W_PARATA
© 2011-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
WIN NAsolutions forms light
®
+ -DMX THRU
+
-COM
L1 N GRND GRNDL1 N
GRNDL1 NL1 N GRND
COM
DMX IN
1 2 3 4
+
-COM
1 2 3 4
+
-COM
1 2 3 4
+
-COM
1 2 3 4
1234
+ -
COM
1234
FEED CABLE CODING
LINE VOLTAGE120-277V
INPUT POWERDMX THRU
TO NEXT DPI
DMX INPUTFROM EASYL
BLACKWHITE
GREENBARE DRAIN WIRE
GREYVIOLET
ORANGE(CAP DO NOT USE)
DMX OUT A DMX OUT B DMX OUT C DMX OUT D
GRND
Maximum Run Length
Model
PLS729W
Voltage MaxFixtures
MaxRun
Length
120V277V
28*32
112ft128ft
*4ft fixtures max. Runs of shorter fixtures will allow up to 32 fixtures
Accessory Options
EasylTM LED Show Controller with LCD touchscreen (integral power supply)
EasylEZ Easyl Solo
Easyl Touch
Easyl Pro
EZSOLOEZTOUCHEZPRO
120/277347
120V or 277V347
blackwhite
BKWH
EZ
Family Version Finish Supply Voltage
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
4
Rev. 04/23/15PLS729W_PARATA
© 2011-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
WIN NAsolutions forms light
®
Integrates DMX signal & 120-277 line voltage onto a single cable. Exterior rated, up to 4 output feeds, Silver Textured Finish
liquid-tight cord gripCORDGP2
Liquid-Tight Cord Grip
Model
CORDGP2
10 1/4"(260mm)
6 5/16"(160mm)
3 9/16"(90mm)
1 3/4"(44mm)
Cable Diameter Range.44 - .50 diameter
1/2 NPSM Threads
1FT JUMPER(1418) CABLE LINEAR 3FT JUMPER(1418) CABLE LINEAR 5FT JUMPER(1418) CABLE LINEAR
JCL1AJCL3AJCL5A
Jumper Cable (Linear) *Optional*
Model
10FT (1418) FEED CABLE LINEAR BLANCA50FT (1418) FEED CABLE LINEAR BLANCA
FCLP10AFCLP50A
Feed Cable (Linear) *Required for all installations*
Model
DPI4W- DMX/POWER INTEGRATOR BOXDPI4W
DMX / Power Integrator
Model
Feed cable connects junction box with first fixture in a run. 14 ga. conductors carry power, shielded 18 ga. conductors carry data. Input end is stripped for connection to the junction box, output end includes a female plug for fixture connection. Also included with each Parata feed cable is a end of run termination plug.(Contact factory for availability of custom feed cable lengths)
Jumper cable provides additional spacing between linear fixtures in the same run. 14 ga. conductors carry power, shielded 18 ga. conductors carry data. Input end includes a male connector, output end includes a female connector.
10'(3.48m)
50'(15.24m)
12"(305mm)
36"(914mm)
60"(1524mm)
DPI4W
4 1/16"(103mm)
Dimensions & Mounting
700ADJ2 - Linear Surface With Adjustable Mount Brackets
48" (1219mm)36 3/16" (919mm)24 3/8" (619mm)12 9/16" (319mm)
39 1/2" (1003mm)27 11/16" (703mm)15 7/8" (403mm)10 7/16" (265mm)
3 5/16"(84mm)
4 1/4"(108mm)
48" (1219mm)36 3/16" (919mm)24 3/8" (619mm)12 9/16" (319mm)
48" (1219mm)36 3/16" (919mm)24 3/8" (619mm)12 9/16" (319mm)
ADJUSTABLE
FLEXIBLE MOUNT
3 1/32"(77mm)
2 3/4"(70mm)
2 3/4"(70mm)
3 3/4"(95mm)
3"(95mm)
4 1/8"(105mm)
3 1/32"(77mm)
4 5/16"(110mm)
ADJUSTABLE IN10 DEG INCREMENTS
700ADJ1 - Linear Surface With Adjustable Hinge Mounts
700FMC - Linear Surface With Fixed Mounts
4 1/4"(108mm)
Brackets slide toadjust to variousmounting widths
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
5
Rev. 04/23/15PLS729W_PARATA
© 2011-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
WIN NAsolutions forms light
®