01. ete-m spec

_________________________________________________________________

System

Tactical Exchange

ETE-M

Technical Description

December, 2015

Rev. 1.0

Function

Organization

Name

Phone No.

Signature

Date

Prepared by

Peryphon

Electrical Design

Peryphon

and Engineering

Mechanical Design

Peryphon

and Engineering

Engineering &

Development &

Peryphon

Project Manager

Check, Approved

Peryphon

23 Hamelacha St., entrance B, floor 2, New Industrial Park Rosh-Ha’ayin 48091 Israel Page 1 of 12

TEL: +972-3-9025682 +972-3-9025684 FAX:

www.peryphon-dev.co m X

File name - ETE-M Spec.docx

_________________________________________________________________

Copyright Peryphon Dev Ltd

Proprietary Notice

This document contains classified and confidential information and is owned by Peryphon Dev. It is prohibited to copy, use, or transmit this document and/or any part thereof to any unauthorized persons without the written permission of Peryphon Dev Ltd

Revision History Table

Revision

Date Issued

Description of Change

Source of

Change

1

2

3

4


TEL: +972-3-9025682 +972-3-9025684 FAX:


_________________________________________________________________

TABLE OF CONTENTS

Para. Title of Para. Page

1. ETE-M 5X

1.1 PRODUCT DESCRIPTION 5X

1.2 ELECTRICAL SPECIFICATIONS 7X

1.3 MAIN FEATURES 7X

1.4 CONFIGURATION, SETUP AND TESTING 8X

1.5 CONNECTORS AND INDICATIONS 8X

1.6 MIL-STD COMPLIANT 9X

1.7 PHYSICAL CHARACTERISTICS AND ENVIRONMENTAL CONDITIONS 10X

1.8 INSTALLATION AND CARRY 10X

1.9 LINE DISTRIBUTION FRAME – LDF12 11X

LIST OF FIGURES

Figure Title of Figure Page

Figure 1. ETE-M (for reference only) 5X

Figure 2. ETE-M Connectivity example 6X


TEL: +972-3-9025682 +972-3-9025684 FAX:


_________________________________________________________________

LIST OF ABBREVIATIONS

Abbreviation

Clarification

FXS

Foreign Exchange subscriber

FXO

Foreign Exchange Office

LAN

Local Area Network

WAN

Wide Area Network

TEL: +972-3-9025682 +972-3-9025684 FAX:


_________________________________________________________________

ETE-M

Figure 1. ETE-M (for reference only)

PRODUCT DESCRIPTION

The ETE-M is a compact, heavy duty, military grade PBX that supports 140 extensions total, including 36 FXS subscribers, 4 FXO lines and up to 100 IP phones using external switches. This rugged and waterproof product operates on a 10.8-33VDC power source.

ETE-M subscribers include CB telephones and IP phones. CB telephones are connected via field wire, using standard binding posts on the unit's front panel for fast and secure connection.

The subscribers can make calls from one extension to the other by dialing the required extension number. The product also provides telephony features such as Call Transfer, Call forward, call waiting, three way conferences and hunt groups.

The 1st 12 FXS interface are accessible via binding post pairs on the front panel. The other 24 FXS interfaces are accessible via two line distribution frames (LDF-12) that connect to the ETE-M via two connectors on the ETE front panel.

The ETE-M has four FXO lines (also accessible via binding post pairs on the front panel) which allow connection to a subscriber line of another telephony exchange (e.g. a PSTN line drop or any other military PBX). The following figure shows a typical deployment:


TEL: +972-3-9025682 +972-3-9025684 FAX:

_________________________________________________________________

Figure 2. ETE-M Connectivity example

As the ETE-M includes a state of the art VoIP telephony exchange, it also supports up to 5 IP phones that can be connected directly to its local LAN interfaces, or up to 100 IP

Phones via an external IP switch, in addition to the 36 FXS extension and 4 FXO extensions.

The ETE-M can also be connected to a higher and lower echelon PBX via one of its LAN/WAN interfaces, using modern VoIP protocols (SIP/RTP).


TEL: +972-3-9025682 +972-3-9025684 FAX:


_________________________________________________________________

ELECTRICAL SPECIFICATIONS

Power

Power feed 10.8-33VDC (Approx. 80W±20% maximum when all lines are active simultaneously at nominal input voltage of 24VDC)

Subscriber interfaces

36 FXS lines (CB telephone extensions with loop current of 25mA which can support up to 10Km communication link using ETP-1 telephone connected with WD-TT1 tactical wire. It is possible to connect 2 additional ETP-1 phones on the end-side. The cable used to connect each of the additional 2 phones shall be less than 100m in length.

The FXS line can support up to 20Km communication link using one ETP-1 telephone connected with WD-TT1 tactical wire.

It is important to note that while the solution supports 10/20Km enabling the user to establish calls and conversation (with ability to clearly understand the words on both sides of the line), there may be reduced performance over long distances, as a result of the attenuation of the cable (the longer the cable, the more attenuation that is introduced onto the communication line)

4 FXO lines (Foreign Exchange Office)

LAN/WAN interfaces

5 Fast Ethernet (10/100Base-T) LAN ports

1 Fast Ethernet (10/100Base-T) WAN port

Serial console interfaces, including ability to reinitialize the board in case of software malfunction.

MAIN FEATURES

Subscriber to subscriber calls

Hot line / Automatic dialing

Call hold / retrieve

Consultation

Call Transfer

Call forward

Call waiting

Up to 10 simultaneous on-board 3way-conferences initiated by FXS subscribers.

Hunt groups

Flexible dialing plans


TEL: +972-3-9025682 +972-3-9025684 FAX:

_________________________________________________________________

CONFIGURATION, SETUP AND TESTING

Web based configuration for all telephony related features

CLI and SNMP Ver. 2 and Ver. 3

Configuration files

A rich set of build-in testing capabilities

CONNECTORS AND INDICATIONS

Front Panel

The front panel includes the following elements:

Power On/Off toggle Switch

DC Power-in connector

DC Power status indication LED:

Solid on Green: external power source is active.

3 Audiocodes boards Status indication LEDs (Green):

Solid on: board is active and ready

Flashing: board at initialization.

Off: board not active

12 Binding posts pairs for FXS subscribers

4 Binding posts pairs for FXO lines

2 Connectors towards external line distribution frames, 12 (FXS) lines each

LAN1 connector, including:

LAN1 of Board-1 (4 wires)

WAN of Board-1 (4 wires)

Serial console of Board-1 (3 wires, TX, RX, GND)









Ground Screw


TEL: +972-3-9025682 +972-3-9025684 FAX:


_________________________________________________________________

Rear Panels

Sealing screw / pressure equalizing nozzle (Breather)

MIL-STD COMPLIANT

Power supply according to Mil-STD-1275B

Temperature:

– High temperature / storage: MIL-STD-810F, Method 501.4 Procedure I, 71°C

– High temperature / operation: MIL-STD-810F, Method 501.4 Procedure II, 55°C

– Low temperature / storage: MIL-STD-810F, Method 502.4 Procedure I, -30°C

– Low temperature / operation: MIL-STD-810F, Method 502.4 Procedure II, -15°C

Vibration:

– Wheeled vehicle: MIL-STD 810F, Method 514.5 Procedure I, figure 514.5C-3.

– Tracked vehicle: MIL-STD 810E, Method 514.4, Procedure I, category 8, Table 514.4-AIII.

Transit drop: MIL-STD 810F, Method 516.5 Procedure IV, H=122Cm, 6 drops in transportation case on ground

Bench Handling: MIL-STD-810F, Method 516.5, Procedure VI

Functional shock: MIL-STD-810F, Method 516.5, Procedure I, 11mSec. 20g

Bounce (Loose Cargo): MIL-STD-810F, Method 514.5, Procedure II

Humidity: MIL-STD-810F, Method 507.4, 30°C to +60°C up to 95%RH,

Salt Fog: MIL-STD-810F, Method 509.4

Altitude: MIL-STD-810F, Method 500.4, Procedure I Non-operating 40,000 feet and Procedure II operating 15,000 feet

Sand & Dust: MIL-STD-810F, Method 510.4, Procedure I (Blowing Dust)

Fungus: MIL-STD-810F, Method 508.5

Rain: MIL-STD-810F, Method 506.4, Procedure I - Rain and Blowing Rain

Solar Radiation: MIL-STD-810F, Method 505.4, Procedure I

Lightning protection: per IEC 61000-4-5


TEL: +972-3-9025682 +972-3-9025684 FAX:


_________________________________________________________________

EMI/RFI: MIL-STD 461F:

– Bonding - 2.5mΩ

– CE102 - Conducted Emission, Power Leads 10KHz-10MHz

– CS101 - Conducted Susceptibility, Power Leads 30Hz-150KHz

– CS114 - Conducted Susceptibility, Bulk Cable Injection, 10 KHz - 200 MHz

– CS115 - Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation

– CS116 - Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads, 10 KHz-100 MHz

– RE102 - Radiated Emission, Electric Field; Army ground; Figure RE102-4 - 2 MHz-18 GHz

– RS103 - Radiated Susceptibility, Electric Field, 2 MHz-18 GHz 20V/m

MIL-STD-1275B:

– Steady state voltage – 23-33VDC

– Voltage surge – 100V

– Voltage spike imported into device – spike 250V

PHYSICAL CHARACTERISTICS AND ENVIRONMENTAL CONDITIONS

Weight: less than 13.7 Kg

Width: 420 mm (not including 19" brackets)

Height: 180 mm (including bottom spacers)

Depth: 384 mm (including Binding Posts and front handles)

Color & Paint Definitions:

OLIVE DRAB EPOXY PAINTING

PAINT P513.1 PER MIL-F-14072D(ER)

FINAL PAINT FILM PER MIL-C-22750F

CHIP COLOR #24084 PER FED-STD-595B (Dark Green)

DRY FILM THICKNESS TO BE 25-40 Micron

Operation temp.: -15 ºC to +55 ºC.

Storage temp: -30 ºC to +71 ºC.

INSTALLATION AND CARRY

Two spring based recessed handles for two man carry

No special installation is needed.

Table top, or installation in a 19" rack in a 5U space, using a pair of brackets

23 Hamelacha St., entrance B, floor 2, New Industrial Park Rosh-Ha’ayin 48091 Israel

TEL: +972-3-9025682 +972-3-9025684 FAX: www.peryphon-dev.co m X

Page 10 of 12

_________________________________________________________________

LINE DISTRIBUTION FRAME – LDF12

Introduction

The Line Distribution Frame (seen on Figure 1) is a heavy duty; military grade unit connected to ETE-M, up to 2 boxes can be connected to each ETE-M, to supports additional subscribers, twelve subscribers per each box.

The subscribers are connected using standard binding posts located on the unit's top panel, for fast and secure connection.

Physical Characteristics and Environmental Conditions

Weight: Less than 2.2 Kg

Width: 167 mm

Height: 55 mm (not including binding posts)

Depth: 224 mm (not including connector and GND screw)

Color & Paint Definitions:

OLIVE DRAB EPOXY PAINTING

PAINT P513.1 PER MIL-F-14072D(ER)

FINAL PAINT FILM PER MIL-C-22750F

CHIP COLOR #24084 PER FED-STD-595B (Dark Green)

DRY FILM THICKNESS TO BE 25-40 Micron

Operation temp.: -15 ºC to +55 ºC.

Storage temp.: -30 ºC to +71 ºC.

MIL-STD Compliant

Temperature:

– High temperature / storage: MIL-STD-810F, Method 501.4 Procedure I, 71°C

– High temperature / operation: MIL-STD-810F, Method 501.4 Procedure II, 55°C

– Low temperature / storage: MIL-STD-810F, Method 502.4 Procedure I, -30°C

– Low temperature / operation: MIL-STD-810F, Method 502.4 Procedure II, -15°C

Vibration:

– Wheeled vehicle: MIL-STD 810F, Method 514.5 Procedure I, figure 514.5C-3

– Tracked vehicle: MIL-STD 810E, Method 514.4, Procedure I, category 8, Table 514.4-AIII

Transit drop: MIL-STD 810F, Method 516.5 Procedure IV, H=122Cm, 6 drops in transportation case on ground

Bench Handling: MIL-STD-810F, Method 516.5, Procedure VI

Functional shock: MIL-STD-810F, Method 516.5, Procedure I, 11mSec. 20g


TEL: +972-3-9025682 +972-3-9025684 FAX: www.peryphon-dev.co m X

Page 11 of 12

_________________________________________________________________

Bounce (Loose Cargo): MIL-STD-810F, Method 514.5, Procedure II

Humidity: MIL-STD-810F, Method 507.4, 30°C to +60°C up to 95%RH

Salt Fog: MIL-STD-810F, Method 509.4

Altitude: MIL-STD-810F, Method 500.4, Procedure I Non-operating 40,000 feet and Procedure II operating 15,000 feet for 1 hour

Sand & Dust: MIL-STD-810F, Method 510.4, Procedure I (Blowing Dust)

Fungus: MIL-STD-810F, Method 508.5

Immersion: MIL-STD-810F, Method 512.4, Procedure I

Solar Radiation: MIL-STD-810F, Method 505.4, Procedure I

Installation

The Line Distribution Frame can be installed on a surface using 6 screws


TEL: +972-3-9025682 +972-3-9025684 FAX: www.peryphon-

dev.co m X

01. ete-m spec

Documents