02 - casing, tubing, and line pipe

74
Chapter 2 Casing, Tubing, and Line Pipe William 0. Clinedinst, Consultant Casing The successful production of oil and gas depends on the proper performance of casing, which serves as a structural retainer in the well, excludes undesirable fluids, and con- fines and conducts oil or gas from subsurface strata to ground level. Casing must be capable of withstanding ex- ternal collapsing pressure from fluid surrounding the casing, internal pressure encountered in conducting oil or gas from the producing formation, and tension loads resulting from its own suspended weight. It also must be equipped with threaded joints that can be made up easily and that provide leakproof connections. API Casing API developed specifications for casing that meet the major needs of the oil and gas industry and published these in API specifications and bulletins. I-6 These provide stan- dard dimensions, strength and performance properties, and the required thread-gauging practice to ensure com- plete interchangeability. In addition to the API strength grades, the following tables include information on higher-strength casing de- veloped to meet the needs of unusually deep wells. Tables 2.1 and 2.2 give the tensile requirements and range lengths of API casing and liner casing. Table 2.3 lists the mini- mum performance properties of casing. Table 2.4 lists the minimum collapse resistance under axial loads for var- ious API casing grades. Tables 2.5 through 2.7 give the dimensions, weights, and tolerances of round-thread and buttress-thread coupling and length of upset for extreme- line API casing (see also Figs. 2.1 through 2.3). Factors for conversion of gross linear footage to net footage of API short-thread, long-thread, buttress-thread. and extreme-line casings are shown in Tables 2.8 through 2. I 11 respectively. Equations for calculating performance properties of casing are given in a later section. Special Casing Joints A number of special casing joints are available that are useful where higher strength, leak resistance, or clearance is needed than that provided by the standard API round- thread, buttress-thread, or extreme-line casing joints. These special joints obtain their improved properties by various means, such as (1) couplings or box ends with seal rings of teflon, etc.; (2) special thread profiles, such as Acme; (3) torque shoulders; (4) metal-to-metal seals; (5) internal upsets; (6) external upsets; (7) integral joints; and (8) flush joints. API Liner Casing Table 2.12 shows the minimum performance properties of API Grade J-55 plain-end liner casing. Table 2.13 shows the minimum collapse resistance under axial loads of API Grade J-55 liner casing. Design of Casing Strings Oil, Water, and Mud-Weight Factors. Table 2.14 gives the oil, water, and mud weight factors used in casing string design. Safety factors commonly used in the design of casing strings are the following: collapse strength, 1.125; joint strength, 1.80; plain-end yield strength, 1.25; and internal yield pressure, 1.OO. These safety factors will be used in the following casing string designs. However, it is the re- sponsibility of the designer to select safety factors to suit particular needs. Single Weight and Grade Casing String. Collapse Safe- ty Factor. The collapse pressure for a single weight and grade casing string is determined by multiplying the height of the head of mud by the factor for the mud weight found

Upload: kevin-william-timothy

Post on 25-Nov-2015

198 views

Category:

Documents


28 download

DESCRIPTION

oil and gas

TRANSCRIPT

  • iternal collapsing pressure from fluid surrounding the casing, internal pressure encountered in conducting oil or gas from the producing formation, and tension loads resulting from its own suspended weight. It also must be equipped with threaded joints that can be made up easily and that provide leakproof connections.

    API Casing

    API developed specifications for casing that meet the major needs of the oil and gas industry and published these

    These special joints obtain their improved properties by various means, such as (1) couplings or box ends with seal rings of teflon, etc.; (2) special thread profiles, such as Acme; (3) torque shoulders; (4) metal-to-metal seals; (5) internal upsets; (6) external upsets; (7) integral joints; and (8) flush joints.

    API Liner Casing

    Table 2.12 shows the minimum performance properties of API Grade J-55 plain-end liner casing. Table 2.13

    pse resistance under axial loads casing.

    gs

    eight Factors. Table 2.14 gives eight factors used in casing string in API specifications and bulletins. I-6 These provide stan- dard dimensions, strength and performance properties, and the required thread-gauging practice to ensure com- plete interchangeability.

    In addition to the API strength grades, the following tables include information on higher-strength casing de- veloped to meet the needs of unusually deep wells. Tables

    shows the minimum collaof API Grade J-55 liner

    Design of Casing Strin

    Oil, Water, and Mud-Wthe oil, water, and mud wdesign. Chapter 2

    Casing, Tubing, and LWilliam 0. Clinedinst, Consultant

    Casing The successful production of oil and gas depends on the proper performance of casing, which serves as a structural retainer in the well, excludes undesirable fluids, and con- fines and conducts oil or gas from subsurface strata to ground level. Casing must be capable of withstanding ex- 2.1 and 2.2 give the tensile requirements and range lengths of API casing and liner casing. Table 2.3 lists the mini- mum performance properties of casing. Table 2.4 lists the minimum collapse resistance under axial loads for var- ious API casing grades. Tables 2.5 through 2.7 give the dimensions, weights, and tolerances of round-thread and buttress-thread coupling and length of upset for extreme- line API casing (see also Figs. 2.1 through 2.3). Factors for conversion of gross linear footage to net footage of API short-thread, long-thread, buttress-thread. and extreme-line casings are shown in Tables 2.8 through 2. I 1 1 respectively. Equations for calculating performance properties of casing are given in a later section. ne Pipe

    Special Casing Joints

    A number of special casing joints are available that are useful where higher strength, leak resistance, or clearance is needed than that provided by the standard API round- thread, buttress-thread, or extreme-line casing joints. Safety factors commonly used in the design of casing strings are the following: collapse strength, 1.125; joint strength, 1.80; plain-end yield strength, 1.25; and internal yield pressure, 1 .OO. These safety factors will be used in the following casing string designs. However, it is the re- sponsibility of the designer to select safety factors to suit particular needs.

    Single Weight and Grade Casing String. Collapse Safe- ty Factor. The collapse pressure for a single weight and grade casing string is determined by multiplying the height of the head of mud by the factor for the mud weight found

  • G UIR

    nimenstren

    (Ps60,75,95,95,95,00,00,05,10,25,35,60,

    75,

    A O2 AL=194257+

    in Table 2.14. Thushead of mud with a(ll,OOOft~0.5psi/ftlapse safety factor, psi (1.125 x 5,500)

    In Table 2.3, thea collapse resistancwith a collapse resshould select the mmeets the performaing the 7,020-psi colapse pressure, the1.276 (see Table 2

    Joint Sfrengfh Satotal load on the jobuoyancy effects) is(11,000 ft) and th319,000 lbm. Dividstrength of 7-in., 29in Table 2.3 on min319,000-lbm weighfor joint strength.

    Pipe Body Yield body yield strengt676,000-lbm pipe 319,000-lbm weighsafety factor.

    Factor. The bottomhole i. The internal yield pres- in., 29-lbm, N-80 long- 2.3). The 8,160-psi in-

    the 5,500-psi BHP yields

    esigning a combination casing required to resist ttom of the well (Table r this weight and grade grade with a lower col- e procedure is repeated west possible collapse il a higher-weight casing s of a lower-cost material tion and handling prob-

    casing is affected by any e bottom section is not

    ns above the bottom sec- sistance reduced by the 'J i

    where AL = mmimum elongation in 2 I I percent to nearest /z%. A j = cross-sectional area of the tens,le test specimen I,. square ,nches based on speclf,ed OD

    or nom~naf specimen width and speclfled wall tfvckness rounded to the nearest 0 01 or

    0 75 sq m.. whichever IS smaller, and O, = speclfled m~nmwm ultimate tenslIe strength, psi

    + Restncted yeld strength Inlended for se I sour gas service

    t Non-API

    Speaal requwnents an toughness. uniform hardness, and mill testing

    the collapse pressure for an 1 1 ,OOO-ft weight of 9.625 lbm/gal is 5,500 PSI =5,5OOpsi).Tomeetthe 1.125col a collapse resistance of at least 6,188 is required. lightest weight of 7-in. casing with e of at least 6,188 psi is 29-lbm N-80 istance of 7,020 psi. (The designer

    ost economical weight and grade that nce property requirements.) By divid- llapse resistance by the 5,500-psi col- collapse safety factor is found to be .15). fety Factor. For the same string, the int at the top of the well (ignoring the product of the length of the string e 29-lbm/ft weight of the casing or ing the 597,000-lbm minimum joint -lbm, N-80 long-thread casing given imum performance properties by the t of casing yields a 1.87 safety factor

    Safety Factor. In Table 2.3, the pipe

    Internal Yield Pressure Safetypressure (BHP) given is 5,500 pssure (pressure resistance) for 7-thread casing is 8,160 psi (Tableternal yield pressure divided by a 1.48 safety factor.

    Combination Casing Strings

    Collapse Safety Factors. In dcasing string, first determine thethe collapse pressure at the bo2.16). Then, determine how famust be run before a weight andlapse resistance can be used. Thuntil the weight with the loresistance has been used, or untis chosen because the advantageare offset by increased identificalems. The collapse resistance of axial load applied to it. Only thaffected by axial loading. Sectiotion will have their collapse re2-2

    TABLE 2.1-API CASINTENSILE REQ

    Casing Yield Strength (psi)

    Grade Minimum Maximum

    H-40 40,000 80,000 J-55 55,000 80,000 K-55 55,000 80,000 c-75 + 75,000 90,000 L-80 80.000 95,000 N-80 8o;ooo 110,000 c-90 90,000 105,000

    MiTS

    ~

    11

    c-95+ 95,000 110,000 1HC-95* 95.000 1P-110 110,000 Q-125* 125,000 v-150* 150,000

    Liner Casing J-55 55,000

    140,000 1150,000 1180,000 1

    80,000

    A O2 AL = 625,000+

    01

    and I metr,c utvts, h is found to be 676.000 lbm. The body yield strength divided by the t of the casing string yields the 2.12 PETROLEUM ENGINEERING HANDBOOK

    AND LINER CASING EMENTS

    um Minimum ile Maximum

    Hardness Elongation

    gth in 2 in.**

    i) HRC BHN WI - - 000 000 000 000 000 23 241 000 000 25.4 255 000 000 000 000 000

    000 weight of the casing below. Because the axial load acting on the casing and the collapse pressure are both depend- ent on the depth at which the new casing item is intro- duced, the changeover point must be determined by

  • x(3,335-2,055)=2,868 ft,

    which is rounded to the next 50-ft multiple to yield 2,900 ft. Cols. 1, 2,5, 7, and 8 were back-calculated from Co]. CASING, TUBING, AND LINE PIPE

    successive approximation or trial-and-error calculations. When design calculations are made with a computer,

    the collapse resistance under axial loading can be calcu- lated by use of the method described in the section on equations. Take the depth to which the weight and grade being considered will set with the desired safety factor without axial load as a starting point. Then decrease the depth by suitable increments (perhaps 50 ft), calculating the axial load, the collapse resistance, the collapse pres- sure, and the safety factor for each increment until the desired safety factor value is obtained.

    When design calculations are made without a computer, collapse resistance values can be obtained from Table 2.4 (minimum collapse resistance under axial loading). This table lists collapse resistance under axial stress increments of 5.000 psi. For stresses intermediate to the 5.000-psi increments, collapse resistance can be determined by interpolation. The following collapse calculations for the design of the 7-in., I 1 ,OOO-ft string were made from Table 2.4.

    29-lbm N-SO Bottom-Section Collapse Safety Factor. The method for selection of 29-lbm N-SO for the bottom section and the determination of the 1.276 collapse safe- ty factor is identical to that shown for the 11 ,OOO-ft sin- gle weight and grade string.

    26lbm N-80 Intermediate-Section Collapse Safety Factor. Determination of the length of the bottom section and the changeover point to 26 Ibm, the next lower weight, is facilitated by constructing Table 2.17.

    In this table, starting with the tabulated values of axial stress and the corresponding collapse resistance for 26-lbm N-80 casing, the lengths of the 29-lbm casing required to cause the stress and the corresponding collapse safety factors are calculated.

    Co]. 1 gives the axial stress values in 5,00@psi incre- ments. Col. 3 gives collapse resistance under axial load for the cross-sectional area obtained from Table 2.4 for Grades L-80 and N-80. Co]. 2 is the product of Col. 1 and the cross-sectional area. Col. 4 is determined by cal- culating the weight of casing below the section for which the length is being determined. (This is the general format of the table for use with all sections. In this case, the weight of casing below the section is zero because there is no casing below the 29-lbm N-80.) Co]. 5 is the differ- ence between Cols. 2 and 4. Co]. 6 is Col. 5 divided by 29. Co]. 7 is the depth to the bottom of the 26-lbm sec- tion-the changeover point-in this case 11 .OOO ft minus Co]. 6. Co]. 8 is Co]. 7 multiplied by the mud factor (0.5), and Col. 9 is Col. 3 divided by Co]. 8.

    The 1,600-i? length of the 29-lbm section found in Co]. 6 and the 1.126 safety factor for the 26-lbm section at the changeover point were determined by interpolation according to the following method. The length of the 29-lbm section found in Co]. 6 was estimated by cal- culating

    1,302+[(1.125-1.095)/(1.23X-1.095)]

    x(2,605- 1,302)= 1,575 ft,

    which is rounded to the next 50-ft multiple to yield 1,600

    ft. Cols. 1, 2, 5. 7. and 8 were back-calculated from Co]. 6. For instance, the axial stress found in Col. 1 equals (1,600~ 29)/7.549, which equals 6,147 psi. 6. The collapse resistance of the 23.lbm section that cor- responds to the l&299-psi axial stress is estimated by cal- culating

    3,690-[(18,299-15,000)1(20,000-15,000)]

    x(3,690-3,620)=3,644 psi,

    which is rounded to the nearest 10 psi according to API procedures to yield 3,640 psi. The 1.120 collapse safety factor at the 23-lbm section bottom that is listed in Co]. 9 is obtained by dividing Col. 3 by Col. 8. By increasing the length of the 29-lbm intermediate section to 2,950 ft and by repeating the calculations for collapse resistance, 2-3

    TABLE 2.2-API CASING AND LINER CASING RANGE LENGTHS

    Casing Total range length,

    inclusive 16to25 25to34 34to48

    Range length for 95% or more of carload

    Permissible variation, maximum 6 5 6

    Permissible length, minimum 18 28 36

    Loners Same requirements as for casing in Ranges 2 and 3

    The collapse resistance for the 26-lbm section that cor- responds to the 6,147-psi axial stress is estimated by cal- culating

    5,310-[(6,147-5,000)/(10,000-5,000)]

    x(5,310-5,200)=5,285 psi,

    which is rounded to the nearest 10 psi according to API procedures to yield 5,290 psi. The collapse safety factor at the 26-lbm section bottom that is shown in Col. 9 is obtained by dividing Col. 3 by Co]. 8.

    23-lbm N-80 Top Section Collapse Safety Factor. The length of the 26-lbm intermediate section and the change- over point to the next lower weight are calculated with Table 2.18. In Table 2.18, Cols. 5 through 9 cannot be calculated until Col. 2 exceeds Col. 4. The 2,900-Ii length of the 26-lbm section that is shown in Co]. 6 and the 1.120 safety factor of the 23-lbm section at the changeover point were determined by interpolation.

    The length of the 26-lbm section listed in Col. 6 was estimated by calculating

    2,055+[(1.125-1.005)/(1.194-1.005)] we obtain a safety factor of 1.129.

    (continued on page 32)

  • 2-4 PETROLEUM ENGINEERING HANDBOOK TABLE 2.3~MINIMUM PERFORMANCE PROPERTIES OF CASING

    1 2 3 4 5 6 7 8

    Nomrnal Threaded and Coupled

    Weight, OD Threads OD Special

    and Wall Drift of Clearance OD Coupling Thrckness ID Diameter Coupling Coupling (in.) (Ibmlft) Grade (in.) (in.) (in.) (in.) (in.)

    4% 9.50 H-40 0.205 4.090 3.965

    9.50 J-55 0.205 4.090 3.965 10.50 J-55 0.224 4.052 3.927 11.60 J-55 0.250 4.000 3.875

    9.50 K-55 10.50 K-55 11.60 K-55

    11.60 c-75 13.50 c-75

    11.60 L-80 13.50 L-80

    11.60 N-80 13.50 N-80

    11.60 c-90 13.50 C-90

    11.60 C-95 13.50 c-95

    - 11.60 HC-95 1 13.50 HC-95 * 15.10 HC-95

    11.60 P-110 13.50 P-110 15.10 P-110

    15.10 Q-125 1 16.60 Q-125 1 19.10 Q-125

    * 15.10 v-150 f 16.60 v-150 t 1910 v-150

    0.205 4.090 3.965 0.224 4.052 3.927 0.250 4.000 3.875

    0.250 4.000 3.875 0.290 3.920 3795

    0.250 4.000 3.875 0.290 3.920 3.795

    0.250 4.000 3.875 0.290 3.920 3.795

    0.250 4.000 3.875 0.290 3.920 3.795

    0.250 4.000 3.875 0.290 3.920 3.795

    0.250 4.000 3.875 0.290 3.920 3.795 0.337 3.826 3.701

    0.250 4.000 3.875 0.290 3.920 3.795 0.337 3.826 3.701

    0.337 3.826 3.701 0.375 3.750 3.625 0.437 3.626 3.501

    0.337 3.826 3.701 0.375 3.750 3.625 0.437 3.626 3501

    5.000

    5.000 5.000 5.000

    5.000 5.000 5.000

    5.000 5.000

    5.000 5.000

    5.000 5.000

    5.000 5.000

    5.000 5.000

    5.000 5.000 5.000

    5.000 5.000 5.000

    5.000 5.000 5.000

    5.000 5.000 5 000

    - -

    4.875 4.875

    4.875 4.875

    4.875 4.875

    4.875 4.875

    4.875 4.875

    4.875 4.675

    4.875 4.875

    4.875 4.075 4.875

    4.875 4.875 4.875

    4.875 4.875 4.875

    4.875 4.875 4.875

    9 10 11

    Extreme Line

    OD Drift of Box Collapse

    Drameter Powertight Resistance (in.) (in.) (psi) - - -

    -

    - - -

    - - - -

    - -

    - - - -

    -

    - - - -

    - -

    - - -

    - -

    - -

    -

    2,760

    3,310 4,010 4,960

    3,310 4,010 4,960

    6,100 8,140

    6.350 8,540

    6.350 8,540

    6,820 9.300

    7,030 9.660

    8,650 10,380 12,330

    7,580 10,680 14,350

    15,840 19,100 21,920

    18,110 22,330 26.300

    5 11.50 J-55 13.00 J-55 15.00 J-55

    11.50 K-55 1300 K-55 15.00 K-55

    15.00 c-75 18.00 c-75 21.40 c-75 23.20 c-75 24.10 c-75

    15.00 L-80 18.00 L-80 21.40 L-80 23.20 L-80 24.10 L-80

    15.00 N-80 18.00 N-80 21.40 N-80 23.20 N-80 24.10 N-80

    15.00 c-90 18.00 c-90 21.40 c-90 23.20 C-90 24.10 c-90

    Non-API we~ghls and grades

    0.220 4.560 4.435 0.253 4.494 4.369 0 296 4.408 4.283

    0.220 4.560 4.435 0.253 4.494 4.369 0.296 4.408 4.283

    0.296 4.408 4.283 0.362 4.276 4.151 0.437 4.126 4.001 0.478 4.044 3.919 0.500 4.000 3.875

    0.296 4.408 4.283 0.362 4.276 4.151 0.437 4.126 4.001 0.478 4.044 3.919 0.500 4.000 3.875

    0.296 4.408 4.283 0.362 4.276 4.151 0437 4.126 4.001 0.478 4.044 3.919 0.500 4.000 3.875

    0.296 4.408 4.283 0362 4.276 4.151 0437 4.126 4.001 0.478 4.044 3.919 0.500 4.000 3.875

    5.563 5.563 5.563

    5.563 5.563 5.563

    5.563 5.563 5.563 5.563 5.563

    5.563 5.563 5.563 5.563 5.563

    5.563 5.563 5.563 5.563 5.563

    5.563 5.563 5.563 5.563 5.563

    - 5.375 5.375 -

    5.375 5.375

    5.375 5.375 5.375 5.375 5.375

    5.375 5.375 5.375 5.375 5.375

    5.375 5.375 5.375 5.375 5.375

    5.375 5.375 5.375 5.375 5.375

    - -

    4.151

    - -

    4.151

    4.151 4.151 -

    4.151 4.151

    -

    4.151 4.151 - -

    4.151 4.151

    -

    - -

    5.360 -

    5.360

    5.360 5.360 -

    5.360 5.360

    -

    5.360 5.360

    -

    5.366 5.366

    - -

    3,060 4.140 5,560

    3,060 4.140 5,560

    6,940 9,960

    11,970 12,970 13,500

    7.250 10,500 12,760 13,830 14,400

    7,250 10,500 12,760 13,830 14,400

    7,840 11,530 14,360 15.560 16.200

    12

    Pipe-Body Yield

    Strength (1,000 Ibf)

    111

    152 165 184

    152 165 184

    250 288

    267 307

    267 307

    300 345

    317 364

    317 364 419

    367 422 485

    551 608 697

    661 729 837

    182 208 241

    182 208 241

    328 396 470 509 530

    350 422 501 543 566

    350 422 501 543 566

    394 475 564 611 636

  • CASING. TUBING. AND LINE PIPE 2-5

    E13

    Plain

    End or

    xtreme Lfne

    3.190

    4.380 4 790 5350

    4 380 4 790

    5.350

    7290 0460

    7 780

    9 020

    7 780

    9 020

    8 750 10.150

    9.240 10710

    9240 10710

    12,450

    10690

    12410 14420

    16 380 16230 21 240

    19660

    21.880 25490

    4240

    4.870 5,700

    4,240

    4.870 5.700

    7.770 9,500

    11,470

    12,550 13.130

    8.290 10.140

    12.240

    13.380

    14.000

    8.290 10.140 12.240 13.380

    14.000

    9,320

    11.400 13.770

    15.060 15.750

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued)

    14 15 16 17 18 19 20 21 22 23 24 25 26 27

    Joint Strength" (1.000 Ibl)

    Internal Pressure Reslstancet (PSI) Threaded and Coupled Bullress Thread Buttress Thread

    Special

    Regular ClEiranCe Special

    Round Coupling Coupling Round Regular Clearance

    Thread Same Hlaher Same Maher Thread Couollna SCJl3Xl

    Reaular

    Short Lono Grade Gkde Grade G&de Short I

    - 3.190 4380 4.790 5.350

    4 380 4 790

    5.350

    .ong Coupling

    Higher

    Grade' Clearance

    Coupling

    Coupling

    Higher

    Grade'

    -

    - 4 240

    4.870 5,700

    4.240 4.870 5 700

    -

    -

    -

    -

    - -

    5.350

    -

    4.790 5.350

    5 350

    7290 8.460

    7 780 9020

    7 780 9020

    8 750 10150

    9240 10710

    9240 10 710

    12.450

    10690

    12410 14420

    16380 16.650 16650

    19660

    19980 19.980

    -

    4.790

    5.350

    7.290 8.460

    7.760 9.020

    7.760 9.020

    8.750 10150

    9.240 10.710

    9 240 10.710

    11.630

    10.690 12.410

    13.460

    15,300 15 300 15.300

    18.360 18.360

    18.360

    4.870 4.870 5.700 5.700

    -

    4.870 5.700

    7.770 9.500

    10.140

    10.140 10,140

    8.290

    10,140

    10.810 10.810

    10.810

    8.290 10.140

    10.810 10.810

    10.810

    9.320

    11.400 12.170

    12.170 12.170

    4.870 5.700

    7.770 9.290

    9.290

    9.290 9,290

    8.290

    9.910

    9,910 9.910 9.910

    8.290 9.910

    9.910 9.910

    9.910

    9.320 11,150 11.150

    11.150 11.150

    77

    - ~ 101 4.790 4 790 4.790 132 5.350 5350 5.350 154

    - - - 112 4.790 4 790 4.790 146

    5350 5350 5.350 170

    ~ 7.290 ~ - 7.490 - -

    7.780 7 780 7.780 -

    9020 7990 9.020 ~

    7.780 7 780 7.780 ~ 9.020 7990 9020 ~

    ~ 8750 ~ ~ - 9 000 ~

    - 9.240 - - ~ 9 490 ~ ~

    9.240 9 240 9.240 ~ 10.710 9500 10.710 -

    12.450 9 500 11.000 ~

    10.690 10690 10.690 ~ 12,410 10990 12.410 -- 14.420 10990 13.910 ~

    ~ 12490 ~ 18.230 12490 14.980 -

    18.370 12.490 14.980 ~

    - 14980 - -

    - 14980 ~ - 14980 ~

    - - 133

    4.870 4,870 4.870 169 5,700 5.130 5.700 207

    - - 147

    4,870 4.870 4,870 186 5 700 5.130 5.700 228

    - 6.990 - - ~ 6.990 - -

    - 6.990 - ~

    - 7.000 - - ~ 6,990 - -

    8.290 7.460 8.290 -

    10.140 7.460 10.140 ~

    - 7,460 - - - 7.460 - ~

    - 7.460 - -

    8,290 7.460 8.290 - 10.140 7460 10.140 ~

    12.240 7.460 10.250 - 13.380 7.460 10.250 ~

    13.620 7.460 10.250 -

    - 8.400 - -

    - 8.400 - - - 8.400 ~

    ~ 8.400 - - - 8.400 ~ ~

    -

    - 162

    - 203 225

    203 203 203 225 225 225

    -

    180

    212 257

    212

    257

    223

    270

    223 270

    234 284

    245 297

    357

    279

    338 406

    438 496 588

    519

    588 697

    -

    249 277

    288 331

    291

    334

    304 349

    309 355

    325 374

    338 388 446

    385

    443 509

    554 579 579

    658

    686 686

    249 277

    -

    249 249 277 277

    288

    320

    -

    304 349

    -

    291

    320

    304 337

    325 374

    338 388

    446

    385 443 509

    -

    611

    686

    -

    309 337

    325 353

    338 338 370 388 370 421

    385 385 421 443 421 509

    454 454

    -

    539 539

    539

    182 252 252 252 223 293 293 287

    201 246

    295 376

    466

    513 538

    -

    309 359

    375 452

    510

    510 510

    309 359

    309 359

    364 364

    364

    364 364

    295

    376

    466 513

    538

    -

    311

    396

    490 540

    567

    311

    396 490

    540 567

    379

    457

    510 510 510

    396 477

    537 537

    537

    404

    487 537

    537 537

    396 477

    566 614

    639

    364

    364

    364 364

    364

    383 383

    383 383

    383

    383

    383 383

    383 383

    -

    304 349

    -

    -

    539

    539

    252 293

    -

    309 359

    - -

    -

    -

    -

    396 477

    479 479

    479

    -

    -

    Extreme Line

    Standard OptIonal Joint

    -

    - - -

    -

    -

    -

    -

    - -

    -

    -

    - -

    328

    416

    416 446

    -

    416

    446 -

    - -

    437 469 -

    -

    430

    469 - -

  • 2-6 PETROLEUM ENGINEERING HANDBOOK TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued)

    1 2 3 4 5 6 7 8 9 10 11 12

    Nominal Threaded and Coupled

    Weight. OD Extreme Line

    Threads 00 Special OD Pipe-Body and Wall Drift of Clearance Drift of Box Collapse .Yield

    OD Coupling Thickness ID Diameter Couplmg Coupling Diameter Powertight Resistance Strength (in.) (Ibmlft) Grade (in ) (in.) (in.) (In.) (in.) (in.) (in.) (psi) (1,000 Ibf) _~~

    5 15.00 18.00 21 40 23.20 2410

    t 1500 II 1800 + 23.20

    15.00 18.00 21 40 2320 24.10

    15.00 1800 23 20 24.10

    * 15.00 II 18.00 f 23.20

    c-95 0.296 4408 4.283 5.563 c-95 0.362 4276 4.151 5.563 c-95 0.437 4126 4.001 5.563 c-95 0.478 4044 3.919 5.563 c-95 0.500 4.000 3.875 5.563

    HC-95 0.296 4.408 4 283 5.563 HC-95 0.362 4276 4151 5.563 HC-95 0.478 4044 3919 5.563

    P-110 P-110 P-110 P-110 P-110

    Q-125 Q-125 Q-125 Q-125

    v-150 v-150 v-150

    0.296 4408 4283 5.563 0 362 4276 4.151 5.563 0.437 4.126 4.001 5.563 0.478 4.044 3919 5.563 0.500 4.000 3875 5.563

    0.296 4408 4.283 5.563 0.362 4276 4151 5.563 0.478 4.044 3.919 5.563 0.500 4.000 3.875 5.563

    0.296 4.408 4.283 5.563 0.362 4.276 4151 5.563 0.478 4.044 3919 5.563

    5% 14.00

    14.00 15.50 17.00

    H-40 0.244 5.012

    J-55 0.244 5.012 J-55 0.275 4.950 J-55 0.304 4.892

    14.00 15.50 17.00

    17.00 20.00 23.00

    K-55 0.244 5.012 K-55 0.275 4.950 K-55 0.304 4.892

    c-75 0.304 4.892 c-75 0.361 4.778 c-75 0.415 4.670

    17.00 L-80 0.304 20.00 L-80 0.361 23.00 L-80 0.415

    17.00 20.00 23.00

    17.00 20.00 23.00 26.00 35.00

    17.00 20.00 23.00

    N-80 N-80 N-80

    c-90 c-90 c-90 c-90 c-90

    c-95 c-95 c-95

    * 17.00 HC-95 t 20.00 HC-95 f 23.00 HC-95

    17.00 P-110 20.00 P-110 23.00 P-110

    . 17.00 Q-125 t 20.00 Q-125

    23.00 Q-125 * 26.80 Q-125

    f 20.00 v-150 1 23.00 v-150 . 26.80 v-150

    0.304 0.361 0.415

    0.304 0.361 0.415 0.476 0.650

    0.304 0.361 0.415

    0.304 0.361 0.415

    0.304 0.361 0.415

    0.304 0.360 0.415 0.500

    0.361 0.415 0.500

    Non-API weights or grades

    5.375 5.375 5.375 5375 5.375

    5.375 5.375 5.375

    5.375 5.375 5.375 5.375 5.375

    5.375 5.375 5.375 -

    5.375 5.375 5.375

    4.892 4.778 4.670

    4.892 4.778 4.670

    4.892 4.778 4.670 4.548 4.200

    4.892 4.778 4.670

    4.892 4.778 4.670

    4.892 4.778 4.670

    4.892 4.778 4.670 4.500

    4.778 4.670 4.500

    4.887

    4.887 4.825 4.767

    4.887 4.825 4.767

    4.767 4.653 4.545

    4.767 4.653 4.545

    4.767 4.653 4.545

    4.767 4.653 4.545 4.423 4.075

    4.767 4.653 4.545

    4.767 4653 4.545

    4.767 4.653 4.545

    4.767 4.653 4.545 4.375

    4.653 4.545 4.375

    6.050

    6.050 6.050 6.050

    6.050 6.050 6.050

    6.050 6.050 6.050

    6.050 6.050 6.050

    6.050 6.050 6.050

    6.050 6.050 6.050 6.050 6.050

    6.050 6.050 6.050

    6.050 6050 6.050

    6.050 6.050 6.050

    6.050 6.050 6.050 6.050

    6.050 6.050 6.050

    - - -

    5.875 4.653 5.875 4.653 -

    5.875 5.875

    5.875 5.875 5.875

    5.875 5.875 5.875

    5.875 5.875 5.875

    5.875 5.875 5.875 5.875 5.875

    5.875 5.875 5.875

    5.875 5.875 5.875

    5.875 5.875 5.875

    5.875 5.875 5.875 5.875

    5.875 5.875 5.875

    4.653 4.653

    4.653 4.653 4.545

    4.653 4.653 4.545

    4.653 4.653 4.545

    4.653 4.653 4.545

    -

    4.653 4.653 4.545 - -

    4.653 4.653 4.545 - - - -

    - -

    4151 5.360 4151 5.360 - -

    - -

    - - - -

    4151 5.360 4.151 5.360 - - - -

    - -

    - -

    - -

    - -

    -

    5.860 5.860

    -

    5.860 5.860

    5.860 5860 5.860

    5.860 5.860 5.860

    5.860 5.860 5.860

    5.860 5.860 5.860 - -

    5.860 5.860 5.860

    -

    5.860 5860 5.860

    - - -

    8,110 416 12,030 501 15,160 595 16,430 645 17,100 672

    9,380 416 11,880 501 15,820 645

    8,850 481 13,470 580 17,550 689 19,020 747 19,800 778

    9,480 547 14,830 659 21,620 849 22,500 884

    10,250 656 16,860 791 25,940 1,019

    2,620

    3.120 4,040 4,910

    3,120 4.040 4,910

    6,040 8,410

    10,470

    6,280 8,830 11,160

    6,280 8,830

    11,160

    6,740 9,630

    12.380 14,240 18,760

    6,940 10,010 12,940

    8,580 10,630 12,450

    7,480 11,100 14,540

    7,890 12,080 16,070 20,660

    13,460 18,390 24.790

    161

    222 248 273

    222 248 273

    372 437 497

    397 466 530

    397 466 530

    447 525 597 676 891

    471 554 630

    471 554 630

    546 641 729

    620 729 829 982

    874 995

    1.178

  • CASING, TUBING, AND LINE PIPE 2-7 TABLE 2.3~MINIMUM PERFORMANCE PROPERTIES OF CASING (continued)

    13 14 15 16 17 16 19 20 21 22 23 24 25 26 27

    Joint Strenath" (1 000 lbf)

    Plain

    End or

    Extreme

    Lfne

    9.840 12.040

    14.530 15 890

    16630

    9.840

    12.040 15.890

    11 400

    13940 16.820 18,400

    19.250

    12.950 15840 20.910

    21.880

    15.540

    19010 25 090

    3.110

    4.270 4.610 5.320

    4.270 4.810 5.320

    7 250

    8.610

    9.900

    7 740

    9 190 10:560

    7 740 9190

    10.560

    6.710 10.340 11.880

    13.630

    18.610

    9.190

    10.910 12.540

    9.190 10.910 12.540

    10.640 12.640 14520

    12.090

    14.360 16.510 19890

    17.230 19.810 23.860

    Internal Pressure Reslstancet (PSI)

    - Threaded and Coupled

    Buttress Thread Buttress Thread

    Special

    Regular ClC331aWX Special

    Couphng Coupling Round Regular Clearance

    Round

    Thread same Higher -

  • 2-8 PETROLEUM ENGINEERING HANDBOOK TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued)

    1 2 3 4 5 6 7 8 9 IO 11 12

    Nominal Weraht. Threads

    and

    Threaded and Coupled

    OD

    Wall Draft

    Extreme Line

    OD Special of Clearance Drift

    OD Pipe-Body of Box Collapse Yield

    Powertight Resistance Strength

    (In.1 (1,000 Ibf) (Psi) 2,520

    2,970 4,560

    2,970 4,560

    5,550 7,790 9,800

    5,760 8,170 10,320

    5,760 8,170 10,320

    6,140 8.880 11,330

    6,310 9,220 11,810

    229

    7.000

    7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    315 382

    315 382

    520 610 688

    555 651 734

    555 651 734

    624 732 826

    659 773 872

    OD Coupling Thickness ID Diameter Coupling Coupling Diameter (In.) (Ibm/ft) Grade (in.) On.) (in.) (In.) (in.) (in.)

    7.000 7.000

    7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    7.000 7.000 7.000

    - -

    -

    7.375 7.375

    7.375 7.375

    7.375 7.375 7.375 7.375 7.375 7.375

    7.375 7.375 7375 7.375

    ' 7.375 7.375

    7.375 7.375 7.375 7.375 7.375 7.375

    5.730

    -

    5.730

    5.730 5.666 5.550

    5.730 5.666 5.550

    5.730 5.666 5.550

    5.730 5.666 5.550

    5.730 5.666 5.550

    5.730 5.666 5.550

    - - -

    - - -

    -

    6.151 6.151

    -

    7.390 7.390

    -

    6.151 6.151

    6.151 6.151 6.059 5.969 5.879 5.795

    7.390 7.390

    7.390 7.390 7.390 7.390 7.530 7.530

    6.151 7.390 6.151 7.390 6.059 7.390 5.969 7.390 5.879 7.530 5.795 7.530

    6.151 7.390 6.151 7.390 6059 7.390 5.969 7.390 5.879 7.530 5.795 7.530

    6,730 763 10,160 895 13,220 1,009

    7,020 867 10,990 1,017 14,530 1,147

    7,340 1,041 12,120 1,220 16,500 1,317

    1,420 1,970

    2,270 3,270 4.320

    2.270 3,270 4,320

    3,750 5,220 6,730 8,200 9,670 10,680

    3,830 5,410 7,020 8,610 10,180 11,390

    3,830 5,410 7,020 8,610 10,180 11.390

    196 230

    316 366 415

    316 366 415

    499 566 634 699 763 822

    532 604 676 745 814 877

    532 604 676 745 814 877

    6% 20.00 H-40 20.00 J-55 24 00 J-55

    20 00 K-55 24.00 K-55

    24.00 c-75 28.00 c-75 32.00 c-75

    24.00 L-80 28.00 L-80 32.00 L-80

    24 00 N-80 28.00 N-80 32.00 N-80

    24.00 C-90 28.00 C-90 32.00 C-90

    24.00 C-95 28.00 c-95 32.00 C-95

    24.00 P-110

    0288 6.049 5.924 7.390

    0.288 6.049 0.352 5.921

    0.288 6.049 0.352 5.921

    5.924 5.796

    5.924 5.796

    0.352 5.921 0.417 5.791 0.475 5.675

    0.352 5.921 0.417 5.791 0.475 5.675

    0.352 5.921 0.417 5.791 0.475 5.675

    0.352 5 921 0.417 5.791 0.475 5.675

    0.352 5.921 0.417 5.791 0.475 5.675

    28.00 P-110 32.00 P-110

    * 24.00 Q-125 * 28.00 Q-125 * 32.00 Q-125

    * 24.00 v-150 * 28.00 v-150 . 32.00 v-150

    0.352 5.921 0.417 5.791 0.475 5.675

    0.352 5.921 0.417 5.791 0.475 5.675

    0.352 5.921 0.417 5.791 0.475 5.675

    5.796 5.666 5.550

    5.796 5.666 5.550

    5.796 5.666 5.550

    5.796 5.666 5.550

    5.796 5.666 5.550

    5.796 5.666 5.550

    5.796 5.666 5.550

    5.796 5.666 5 550

    7.390 7.390

    7.390 7.390

    7.390 7.390 7.390

    7.390 7.390 7.390

    7390 7.390 7.390

    7.390 7.390 7.390

    7.390 7390 7390

    7.390 7.390 7.390

    7.390 7.390 7.390

    7390 7390 7390

    7 17.00 H-40 0.231 6.538 6.413 7.656 20.00 H-40 0.272 6.456 6.331 7.656

    20.00 J-55 0.272 6.456 6.331 23.00 J-55 0317 6.366 6.241 26 00 J-55 0.362 6.276 6151

    7.656 7.656 7.656

    20.00 K-55 0.272 6.456 6.331 23.00 K-55 0.317 6.366 6.241 26.00 K-55 0362 6 276 6 151

    23.00 c-75 0.317 6.366 6.241 26.00 c-75 0.362 6.276 6.151 29.00 c-75 0.408 6.184 6.059 32.00 c-75 0.453 6.094 5.969 3500 c-75 0.498 6.004 5.879 38 00 c-75 0540 5.920 5 795

    23.00 L-80 0.317 6.366 6.241 26.00 L-80 0.362 6.276 6.151

    7.656 7.656 7.656

    7.656 7.656 7.656 7.656 7.656 7.656

    29 00 L-80 0408 6 184 6.059 32.00 L-80 0.453 6.094 5.969 35.00 L-80 38.00 L-80

    23.00 N-80 26.00 N-80 29.00 N-80 32.00 N-80 35 00 N-80 3800 N-80

    'NO" API wqhls or grades

    0.498 6.004 5.879 0.540 5.920 5.795

    0.317 6.366 6.241 0.362 6 276 6.151 0.408 6.184 6.059 0.453 6.094 5.969 0.498 6.004 5.879 0.540 5.920 5.795

    7.656 7.656 7656 7.656 7.656 7.656

    7.656 7.656 7.656 7.656 7.656 7.656

  • CASING, TUBING, AND LINE PIPE 2-9

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued) 13

    PIaNn

    End or

    Extreme Line

    4 180 5.1 10

    4180

    5.1 10

    6 970 8 260 9.410

    7.440

    8 810

    10.040

    7440

    8810 10040

    8 370 9910 11290

    8.830

    10.460 11.920

    10.230 12.120

    13.800

    11.620

    13.770 15.680

    13.950 16.520

    18.820

    14 15 16 17 18- 19 20 21 22 23 24 25 26 27

    Jolnt Strength" (1.000 Ibf)

    Internal Pressure Reslstancet (PSI) Threaded and Coupled

    Buttress Thread Buttress Thread

    Round

    Thread

    Special

    Regular Clearance Special

    Coupling Couplmg Round Regular Clearance Coupling Special Extreme Line

    Same Higher Same Higher -T!r!!ad ~ Regular

    Short Long Grade Grade Grade Grade Short Long Coipllng / Clearance

    Couplmg Standard Opf~onai

    Jomt joint

    3.040 - - ~ 184

    4.180 4.180 4.180 4.180 4.060 4180 245 5.110 5.110 5 110 5.110 4.060 5 110 314

    4.180 4.180 4 180 4.180 4 060 4180 267

    5.110 5.110 5110 5110 4.060 5110 342

    -

    374 453

    453

    548

    477 477

    6.970 6.970

    8.260 8 260 9.410 9200

    7.440 7,440

    8.810 8.810

    10040 9 820

    7.440 7440

    8.810 8810 10040 9 820

    8370 8370 9910 9910 11.290 11.050

    8.830 8830

    10.460 10.460 11.830 11.660

    10.230 10.230 11,830 12,120

    11.830 13.500

    11.620 11.620 11.830 13 770 11.830 14,780

    11.830 13950 11.830 14780

    11.830 14 780

    - - -

    - 5 540 ~ 5540 ~ 5540

    ~ 5910 - 5 910

    ~ 5910

    7440 5 910

    8810 5910 10.040 9 910

    ~ 6650 - 6.650 - 6650

    - 7.020 - 7020 - 7.020

    10.230 8.120 12.120 8.120

    13.800 8.120

    - 8.310

    - 8.310 - 8310

    - 8.310 - 8.310

    - 8.310

    266 340

    290

    372

    453

    552 638

    473 576

    666

    481

    586 677

    520 633 732

    546

    665 769

    641 781

    904

    702

    855 989

    831 1.013 1172

    583

    683 771

    Htgher

    Grade'

    -

    374

    453

    453 548

    -

    374

    390

    453 494

    494 494 494

    494

    494 494

    520 520 520

    520 520 520

    546 546 546

    650 650

    650

    702

    702 -

    Couplmg

    Higher

    Grade'

    -

    374 453

    453

    520

    -

    -

    605

    605 648 717

    605

    648 717

    637

    682 755

    637

    682 755

    668

    716 793

    796 852 944

    -

    605

    605 644 644

    605

    644 644

    637 678 678

    637

    678 678

    668

    712 712

    796 848

    848

    7440 -

    6120 - 8120 -

    - -

    8.310 - 8.310 -

    8.310 -

    - -

    592 693

    783

    615 721 814

    633 742

    037

    665

    780 880

    786 992

    1040

    860 1.008 1 138

    1023 1 199

    1,353

    2.310

    2 720

    3.740 4.360 4.980

    3.740 4.360 4.980

    5.940

    6.790 7.650

    8.490 9.340

    10.120

    6.340

    7.240

    8.160 9 060

    9.960

    10.800

    6.340

    7.240 8 160

    9060

    9 960 10.800

    2.310

    2.720

    3.740 4.360 4.980

    3.740

    4.360 4.980

    - 4360 4.980

    - 4.360 4.980

    5940

    6 790 7.650

    8.490 8.660

    8.660

    6.340 7240

    8160 9060 9240

    9.240

    6.340 7.240 8.160

    9060 9240 9240

    - -

    4.360 4980

    -

    4360 4.980

    5.940

    6.790 7.650

    7930 7930 7930

    6 340

    7240 8 160 8460 8460

    8.460

    6340 7240 8.160 8.460

    8.460 8460

    4.360 4.980

    4.360 4.980

    -

    -

    6340

    7240 al60 9060

    9.960 10800

    6340 7.240 8.160

    9.060

    9.960 10.800

    - 3.950 3950

    3.950 3.950

    5.380

    5380 5380 5.380 5 380

    5380

    5 740

    5 740 5 740 5 740 5.740

    5.740

    5 740

    5 740 5 740

    5 740 5.740 5 740

    - 4 360 4 980

    - 4 360 4.980

    - 6 340

    7.240 7.890 7.890 7.890

    7 890

    6.340 7 240 7890

    7.890 7.890 7.890

    122

    176

    234

    284 334

    254

    309 364

    -

    432 490

    -

    522 592

    557

    631 707

    779 833 833

    565

    641 718 791 833 833

    588 667 746 823

    876 876

    - - -

    615 721 814

    - - -

    -

    786 922

    1.040

    - - -

    - 832 - 832 - 832

    - -

    -

    432 490

    421 421

    -

    522 592

    -

    - - - -

    -

    522 533

    533

    533 533

    533 533 533

    - - - - -

    533

    533 533 533 533 533

    588

    667 746 823

    898

    561 561 561 561

    561 561 968

    - -

    -

    615 650 650

    - - -

    -

    - -

    786 832

    832

    -

    - -

    -

    -

    - -

    -

    - -

    -

    -

    499 506

    -

    632 641

    632

    641 685

    761 850 917

    632

    641 685 761 850 917

    666 675 721

    801

    895 965

    - - -

    - - -

    - -

    -

    499 506

    -

    632 641

    632

    641 674

    674 761 761

    632

    641 674 674 761

    761

    666 675 709

    709

    801 801

  • 2-10 PETROLEUM ENGINEERING HANDBOOK TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued)

    1 2 3 4 5 6 7 8 9 10 11 12

    Nominal Threaded and Coupled

    Weight, OD Extreme Line

    Threads OD Special OD Pipe-Body and Wall Drift 01 Clearance Drift of Box Collapse Yield

    OD Couolino Thickness ID Diameter Couplinq Couplinq Diameter Powertiaht Resistance Strength - (in.) (Ibmlft) Grade (in.) (in.) (in.) (in.) (in.) (in.) (in.) (Psi) (1,000~lbf)

    23.00 26.00 29.00 32.00 35.00 38.00

    23.00 26.00 29.00 32.00 35.00 38.00

    c-90 0.317 c-90 0.362 c-90 0.408 c-90 0.453 c-90 0.498 c-90 0.540

    c-95 0.317 c-95 0.362 c-95 0.408 c-95 0.453 c-95 0.498 c-95 0.540

    23.00 HC-95 26.00 l-c-95 29.00 HC-95 32.00 HC-95

    0.317 0 362 0.408 0.453 0.498 0.540

    6.366 6.241 6.276 6.151 6.184 6.059 6.094 5.969 6.004 5.879 5.920 5.795

    6.366 6.241 6.276 6.151 6.184 6.059 6.094 5.969 6.004 5.879 5.920 5.795

    6.366 6.241 6.276 6.151 6.184 6.059 6.094 5.969

    35.00 HC-95 38.00 HC-95

    6.004 5.879 5.920 5.795

    26.00 P-110 0.362 6.276

    7.656 7.656 7.656 7.656 7.656 7.656

    7.656 7.656 7.656 7.656 7.656 7.656

    7.656 7.656 7.656 7.656 7.656 7.656

    6.151 7.656 6.059 7.656 5.969 7.656 5.879 7.656 5.795 7.656

    6.059 7.656 5.969 7.656 5.879 7.656 5.795 7.656 5.625 7.656

    6.059 7.656 5.969 7.656 5.879 7.656 5.795 7.656

    7.375 7.375 7.375 7.375 7.375 7.375

    7.375 7.375 7.375 7.375 7.375 7.375

    7.375 7.375 7.375 7.375 7.375 7.375

    7.375 7.375 7.375 7.375 7.375

    7.375 7.375 7.375 7.375 7.375

    7.375 7.375 7.375 7.375 7.375

    6.151 7.390 6.151 7.390 6.059 7.390 5.969 7.390 5.879 7.530 5.795 7.530

    6.151 7.390 6.151 7.390 6.059 7.390 5.969 7.390 5.879 7.530 5.795 7.530 - -

    - - - -

    6.151 6.059 5.969 5.879 5.795

    - -

    -

    - -

    7.390 7.390 7.390 7.530 7.530

    - -

    - - - - -

    - - - -

    - - - - -

    -

    8.010

    8.010

    8.010 8.010 8.010 8.010

    8.010 8.010 8.010 8.010 - - -

    8.010 8.010 a.010 8.010 -

    -

    4,030 599 5,740 679 7,580 760 9,380 839 11,170 915 12,820 986

    4,140 632 5,880 717 7,830 803 9,750 885

    11,650 966 13,440 1,041

    5,650 632 7,800 717 9,200 803 10,400 885 11,600 966 12,700 1,041

    6,230 830 8,530 929

    i 0,780 1,025 13,020 1,119 15,140 1,205

    9,100 1,056 11,720 1,165 14,310 1,272 16,750 1,370 20,330 1,565

    9,790 1,267 13,020 1,388 16,220 1,526 19,240 1,644 24.390 1,878

    29.00 P-110 0.408 6.184 32.00 P-110 0.453 6.094 35.00 38.00

    29.00 32.00 35.00 38.00 42 70

    29.00 32.00 35.00 38.00

    P-110 0.498 6.004 P-110 0.540 5.920

    O-l 25 0.408 6.184 O-l 25 0.453 6.094 O-1 25 0.498 6.004 O-125 0.540 5.920 O-l 25 0 625 5.750

    v-150 0 408 6.184 v-150 0.453 6.094 v-150 0 498 6.004 v-150 0.540 5.920

    I 42.70 v-150 0.625 5.750 5.625 7.656

    7% 24.00 H-40

    26.40 J-55

    26.40 K-55

    26.40 c-75 29.70 c-75 33.70 c-75 39.00 c-75 42 80 c-75 45.30 c-75 47.10 c-75

    26.40 L-80 29.70 L-80 33.70 L-80 39.00 L-80 42.80 L-80 45.30 L-80 47.10 L-80

    26.40 N-80 29.70 N-80 33.70 N-80 39.00 N-80 42.80 N-80 45.30 N-80 47.10 N-80

    Non-API weights or grades

    0.300 7.025 6.900

    0.328 6.969 6.844

    0.328 6.969 6.844

    0 328 6.969 6.844 0.375 6.875 6.750 0 430 6.765 6.640 0.500 6.625 6.500 0 562 6.501 6.376 0.595 6.435 6.310 0.625 6.375 6.250

    8.500

    8.500 8.125

    8.500 a.125

    8.500 a.125 8.500 8.125 8.500 8.125 8.500 8.125 8.500 a.125 8.500 8.125 a.500 a.125

    8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125

    8.500 a.125 8.500 a.125 8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125

    -

    6.750

    6.750

    6.750 6.750 6.640 6.500 -

    -

    6.750 6.750 6.640 6.500 - - -

    6.750 6.750 6.640 6.500 -

    -

    2,030

    2,890

    2,890

    3,280 4,650 6,300 8,400 10,240 10,790 11,290

    3,400 4,790 6,560 8,820

    io.aio 11,510 12,040

    3,400 4,790 6,560 8,820 10,810 11,510 12,040

    276

    414

    414

    564 641 729 839 935 986

    1,031

    602 683 778 895 998

    1,051 1,100

    602 683 778 895 998

    1,051 1,100

    0 328 6.969 6.844 0.375 6.875 6.750 0.430 6.765 6.640 0.500 6.625 6.500 0 562 6.501 6.376 0.595 6.435 6.310 0.625 6.375 6.250

    0.328 6.969 6.844 0 375 6.875 6.750 0.430 6.765 6.640 0.500 6.625 6.500 0.562 6.501 6.376 0.595 6.435 6.310 0.625 6.375 6.250

  • CASING. TUBING. AND LINE PIPE Z-11

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued) 13

    Plain

    End or

    Extreme

    Line

    I4 15 16 17 18 19 20 21 22 23 24 25 26 27

    Joint Strength" (1 000 Ibf)

    Internal Pressure Reslstancet (PSI) Threaded and Coupled

    Buttress Thread Buttress Thread

    Special

    Regular ClfZIGXlCe Special

    Round Couphng Coupling Round Regular ClfXSaflCe Coupling SpeClal Coupling Extreme Line

    Thread ~ Same Higher Same Higher Thread Regular Higher Clearance thgher Standard Optional Long Grade Grade Grade Grade Short Long Coupling Grade' Coupling Grade'

    7130 8 150

    9.180 10.190

    11.210

    12150

    Short

    - -

    -

    7.130

    8.150

    9.180 9.520

    9 520 9.520

    7 130

    8.150

    9.180 9.520 9.520

    9520

    7.530 8.600 9.690

    10.760 11 830 12.820

    7.530 7.530

    8.600 8.600 9.520 9.690

    9 520 10050 9 520 10050 9.520 10.050

    7.530

    8.600 9.690

    IO 760 11.830

    12830

    7.530 7.530

    8 600 a 600

    s 520 9 690 9 520 10 050 9 520 10 050

    3 520 10.050

    9.960

    11.220 12460 13700

    14850

    9 520 9.960 9.960 7 480 7480

    9 520 11.220 11220 7480 7480 9 520 11640 11 790 7 480 7480 9 520 11 640 11 790 7 480 7480 3 520 11 640 11 790 7480 7480

    12.750 14.160

    15.560 16880 19530

    -

    --

    - - -

    - -

    -

    -

    .-

    -

    - -

    -

    -

    2750

    4,140

    4.140

    3 520 11 790 7480 9 520 11.790 7480

    9 520 11 790 7 480 9 520 11.790 7 480 9 520 11 790 7 480

    15300 16 990

    18680 20250 23440

    9 520 11.790 7480 9 520 11 790 7 480

    9 520 11 790 7 480 9 520 11 790 7 480

    9 520 11 790 7 480

    2750

    4,140

    4.140

    4140

    4.140

    4,140

    4,140

    5650 5,650 5,650

    6450 6.450 6.450

    7,400 7.400 7.400

    8,610 8610 8.610 9.670 9.670 9.190

    10.240 9,840 9.180

    10,760 9,840 9.190

    6.020 6.020

    6.890 6.890 7.900 7,900

    9,180 9.180

    10,320 10.320 10.920 10,500

    11.480 10.490

    6,020

    6,890 7.900

    9.180 10.320 10,920 11,480

    6.020

    6,890 7.900 9,180

    10.320 10,500 10,490

    6.020 6,890 7,900 9.180

    9,790 9.790

    9,790

    6.020 6.890

    7.900 9.180 9,790 9.790 9,790

    6.450

    6.450 6450 6 450

    6 450

    6 450

    -

    -

    -

    561

    561 561 561

    561

    561

    -

    - -

    6810 6 810 6 810

    6 810 6 810 6810

    - -

    -

    7.530

    447 605

    563 687 648 768 729 847 809 876

    883 876

    505 636 593 722 683 808

    768 891 853 920 931 920

    512 659 602 747

    692 836 779 922 865 964 344 964

    693 853 797 955 897 1053 996 1096

    1087 1096

    885 1045 996 1183

    t 106 1183 1207 1183 1277 1183

    I 049 1.243 1 180 1402

    1310 1402 1430 1402 1514 1402

    - -

    346 483

    377 581

    461 624

    542 709 635 806

    751 929 852 1,035 905 1.090 953 1.140

    482 635 566 721 664 820 786 945

    a92 1,053 947 1,109

    997 1,160

    490 659

    575 749 674 852 798 981 905 1,093

    962 1,152 1013 1.205

    589 589 589

    589 589 589

    -

    8.600

    9.690 10 760 11.630

    11 630

    6 810 7480

    6 810 7480

    6 810 7480 6910 7480 6 810 7480 6810 7480

    -

    659 747

    836 922

    1007 1085

    a53

    955 1053 1 150 1239

    -

    -

    617

    617 617 617 617 617

    -

    - -

    659

    701

    701 701 701

    701

    853

    898 898 898 898

    -

    Jolnt

    666 675 721 801

    a95 965

    699 709 757

    841 940

    1013

    - - -

    - -

    Joml

    666 675

    709 709

    801

    801

    699 709 744

    744 841 841

    - -

    - -

    4.140

    4.140

    6,020

    6,890 7,900 9,180

    6,020 6,020 6.020

    6.890 6,550 6.890

    7.900 6.550 7,900

    9.180 6,550 9.000

    10,320 6.550 9,000 10,920 6.550 8.030 11.480 6.550 9.000

    -

    4.140

    4,140

    5.650 6.140 6,140

    6.140 6.140 6.140 6.140

    6,020

    6,550 6,550 6,550

    6,550 6.550

    6.550

    4.140

    4.140

    6.020

    6.890 7,900 9.000 -

    -

    212

    315

    342

    -

    - -

    - -

    - -

    - - -

    - -

    -

    - -

    -

    -

    483

    581

    -

    -

    659

    749

    852 981

    1,093 1.152 1,204

    702

    702 702 702 702

    757 757

    757 757 757

    898 898

    898 898 898

    -

    -

    - -

    483 483

    581 581

    624 709 735

    735 735 764 735

    635 721

    735 735

    735 764

    735

    659 749

    773 773 773 804 773

    - -

    -

    - -

    659 749

    852 967 967

    1.005 967

    844

    902 1.002 1.118

    1.207

    -

    -

    844

    886 886

    1.002 1.002

    - - -

    -

    -

    - -

    -

    553 553

    700 700

    700 700

    700 700 766 744

    851 744

    700 700 766 851 - - -

    737 737

    806 896 -

    700 700 744 744 - - -

    737 737

    784 784

    - -

  • 2-12 PETROLEUM ENGINEERINGHANDBOOK

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASlNG(continued)

    1 2 3 4 5 6. 7 8 9 10 11 12

    Threaded and Coupled Nomlnal Weight, OD Extreme Line

    Pipe-Body Collapse Yield Resistance Strenoth

    (PSI) (l.OOO-lbf)

    Threads OD Special and Wall Drift of Clearance

    OD Coupling Thickness ID Diameter Coupling Coupling (in.) (Ibm/ft) Grade (in.) (In.1 (In.) (in.) (in.)

    OD Drift of Box

    Diameter PowertIght

    (In.) (in.)

    7% 26.40 29 70 33.70 39 00 42.80 45.30 47.10

    c-90 0.328 c-90 0375 c-90 0.430 c-90 0.500 c-90 0.562

    6.969 6.844 6.875 6.750 6.765 6.640

    c-90 0.595 c-90 0.625

    6.625 6.500 6 501 6.376

    6.310 6.250

    8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125 8.500 8.125

    26.40 c-95 0.328 29.70 c-95 0.375 33 70 c-95 0.430 39.00 c-95 0.500 42.80 c-95 0 562 45.30 c-95 0.595 47.10 c-95 0.625

    6.435 6.375

    6.969 6.875 6.765 6.625 6.501 6.435 6.375

    6.844 8.500 8.125 6.750 8.500 8.125 6.640 8.500 8.125 6.500 8.500 8.125 6.376 8.500 8.125 6.310 8.500 8.125 6.250 8.500 8.125

    I 26.40 . 29.70 II 33.70 * 39.00 I 45.30

    HC-95 0.328 HC-95 0.375 HC-95 0.430 HC-95 0.500 HC-95 0.595

    6.969 6.875 6.765 6.625 6.435

    6.844 8.500 8.125 6.750 8.500 8.125 6.640 8.500 8.125 6.500 8.500 8.125 6.310 8.500 8.125

    29.70 P-110 0.375 6.875 6.750 8.500 8.125 33.70 P-110 0.430 6.765 6.640 8.500 8.125 39.00 P-110 0.500 6.625 6.500 8.500 8.125 42.80 P-110 0.562 6.501 6.376 8.500 8.125 45.30 P-110 0.595 6.435 6.310 8.500 8.125 47.10 P-110 0.625 6.375 6.250 8.500 8.125

    - 29.70 1 33.70

    39.00 42.80 45.30 47.10

    Q-125 0.375 Q-125 0.430 Q-125 0.500 Q-125 0.562 Q-125 0.595 Q-125 0.625

    6.875 6.765 6.625 6.501

    6.750 6.640

    6.435 6.375

    6.500 6.376 6.310 6.250

    8.500 8.500 8.500 8.500 8.500 8.500

    8.125 8.125 8.125 8.125 8.125 -

    f 29.70 . 33.70 f 39.00 f 45.30

    v-150 0.375 6.875 6.750 8.500 8.125 v-150 0.430 6.765 6.640 8.500 8.125 v-150 0.500 6.625 6 500 8.500 8.125 v-150 0.595 6.435 6.310 8.500 8.125

    677 769 875

    1.007 1.122 1.183 1,237

    714 811 923

    1,063 1,185 1,248 1,306

    714 811 923

    1,063 1,248

    940 1,069 1,231 1,372 1,446 1,512

    1,068 1,215 1,399 1,559 1,643 1,718

    1,282 1,458 1.679 1,971

    318 366

    381 503 568

    381 503 568

    775 867 957

    1,059

    827 925

    1,021 1,129

    3,610 5,040 7,050 9,620 11,890 12.950 13.540

    3,710 5,140 7,280

    10,000 12,410 13,660 14.300

    4,850 7,150 8,800 10,600 12,900

    5,350 7,870 11,080 13,920 15,430 16,550

    5,670 8,350 12,060 15,350 17,090 18,700

    6,060 8,850 13,440 19,660

    6.750 8.010 6.750 8.010 6.640 8.010 6.500 8.010

    - -

    6.750 8.010 6.750 8.010 6.640 8.010 6.500 8.010

    -

    -

    - -

    6.750 6.640 6.500

    -

    - -

    -

    -

    -

    8.010 8.010 8.010 - - -

    8% 28.00 H-40 32.00 H-40

    0.304 8.017 7.892 9.625 - 0.352 7.921 7.796 9.625 -

    0.264 8.097 7.972 9.625 0.352 7.921 7.796 9.625 9.125 0.400 7.825 7.700 9.625 9.125

    0.264 8.097 7972 9.625 0.352 7.921 7.796 9.625 9.125 0.400 7.825 7.700 9.625 9.125

    - 1,610 2,200

    1,370

    - 24.00 J-55 32.00 J-55 36.00 J-55

    24.00 K-55 32.00 K-55 36.00 K-55

    36.00 c-75 40.00 c-75 44.00 c-75 49.00 c-75

    36.00 L-80 40.00 L-80 44.00 L-80 49.00 L-80

    Non-API wetghls or grades

    9.120 9.120

    9.120 9.120

    9.120 9.120

    2,530 3,450

    1,370 2,530 3,450

    4,000 5,330 6,660 8,180

    4,100 5,520 6,950

    0.400 7.825 7.700 9.625 9.125 7.700 0.450 7.725 7.600 9.625 9.125 7.600 0.500 7.625 7.500 9.625 9.125 0.557 7.511 7.386 9.625 9.125

    0.400 7.825 7.700 9.625 9.125 0.450 7.725 7.600 9.625 9.125 0.500 7.625 7.500 9.625 9.125 0.557 7.511 7.386 9.625 9.125

    7.500 9.120 7.386 9.120

    7.700 7.600 7.500 7.386

    9,120 9.120 9.120 9.120 8,580

  • CASING. TUBING, AND LINE PIPE 2-13

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued)

    13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

    Joint Strength" (1.000 Ibf)

    Internal Pressure Resistancef (PSI) Threaded and Coupled

    Buttress Thread Buttress Thread

    Platn

    End 01

    Extreme

    Line

    6.760 7.750

    8.880 10.330 11,610

    12,290 12.910

    7.150 8.180 9.380

    10,900 12.250 12.970 13.630

    7 150

    8.180 9.380

    10.900 12.970

    9.470 10.860

    12,620 14.190 15.020 15.780

    10.760

    12,340

    14.340 16.120

    17.070

    17.930

    12,910

    14.600 17,210

    20.480

    2.470 2,470

    2.860 2.860

    2950 2,950 3.930 3,930

    4.460 4.460

    -

    3,930

    4,460

    3.930 3.930

    4.460 4,460

    2.950 2.950

    3,930 3.930 4.460 4.460

    3.930 4,460

    6090 6.850

    7.610 8480

    3.930 3,930 4.460 4.460

    6.090 6.850

    7.610 8.480

    6.090 6.850

    7.610 8 480

    6 490 7 300 8.120

    9.040

    6.490 6.490 6.490 7.300 7.300 7,300 8120 6.120 8,120 9.040 9.040 9.040

    6.490 - 6.490 6.490 6.490 7.300 - 7.300 7,300 7,300 8.120 - 8.120 6.120 8.120 9.040 - 9.040 9.040 9.040

    Round

    Thread

    Spew

    Regular Clearance Specfal

    Couptlng Coupttng Round Regular Clearance Coupling Special Coupling Extreme Lfne

    Same Htgher Same Higher Thread Regular Hqher

    Short

    - -

    Long Grade Grade Grade Grade Short Long Couphng Grade'

    Clearance

    Couplmg

    6.760 - 7.370 ~

    7,370 - 7.370 - 7.370 -

    7.370 ~ 7,370 -

    7.150 - 7.780 - 7.780 -

    7.780 - 7.780 -

    7.780 ~

    7.780 -

    7.150 7.150

    7.780 8,030 7.780 8.030 7.780 8.030 7.780 8.030

    9.000 9.470 9.000 10.860 6.030 8,030

    6.030 8,030 8.030 8.030 8,030 8.030

    8,030 ~

    8,030 -

    8.030 - - -

    6.030 - - -

    8.030 ~ 8.030 - 8.030 ~

    Standard Opttonal

    6.780 6.780 7.750 7.750

    8.880 8.680 10.330 10.330 11.610 11,020

    11.800 11,020 11.600 11.020

    - 532 ~ 625

    - 733 - 867 - 984

    - 1.045 - 1,100

    ~ 560 - 659

    - 772

    - 914 - 1,037

    - 1,101 - 1,159

    - 568

    - 668 ~ 763

    - 926 - 1.116

    ~ 769 - 901

    - 1.066 - 1.210 - 1.285

    - 1.353

    - 861 - 1.009 - 1,194 - 1.355 - 1,439 - 1,515

    - 1,030 - 1,207

    ~ 1.428

    681

    773

    880 1.013 1,129

    1.169 1.239

    - 681 773

    804 804 804

    804 604

    Htgher

    Grade'

    -

    Jofnt

    737 737

    806 896

    Jofnt

    737

    737

    784 784 -

    -

    -

    -

    - -

    -

    -

    - -

    -

    - - - - -

    - -

    - - -

    -

    -

    -

    - - -

    -

    7,150 7.150 8.180 6,160 9.380 9.380

    10,900 10.900 11,600 11,620

    11.600 11.630

    11.600 11,620

    - - -

    - -

    7.150 7 150 7,150

    8.180 8.180 8.160 9.380 9,380 9.380

    10.900 10,900 10.900 11.800 11 630 12.680

    9.470 9.470 10.860 10,860

    11.800 12,620

    11,800 12.680 11.800 12 680 11.800 12.680

    10.760 10,760

    11,800 12.340

    11.800 12.680 11.800 12.680

    11.800 12680

    11.600 12.680

    9.470 10860 12.620

    12.680 12.680 12.680

    -

    - - -

    11,800 12.660 11.600 12.680 11.800 12,680

    11.800

    -

    12,680 8.030

    -

    3.930

    4,060

    3,930 4,060

    5.530 5.530

    5.530 5.530

    5.900 5.900 5.900

    5.900

    5.900 5.900 5.900

    5.900

    3.930 4.460

    3,930 4.460

    6.490 7 300 8.110

    8.110

    6.340 6,340 6.340

    6.340

    716 813 925

    1.065 1.187 1.251

    1,300

    -

    740

    641 957

    1.101 1.293

    740

    841 957 101 293

    960 960 1,093 ,093 1.258 ,258 1.402 402 1,477 ,477

    1.545 1,545

    1,052 1,197

    1.379 1,536 1,619

    1.673

    1,252 1,424

    1.640

    ~ 1.721 1.926

    233 - 279 ~

    244 - -

    372 417 579

    434 486 654

    263 -

    402 452 690 468 526 780

    - 646 647 ~ 742 947

    - 834 1.046 - 939 1.157

    - 678 864 - 776 966

    - 874 1.066 - 983 1.160

    - 688 895 - 788 1.001 - 887 1.105 - 997 1.222

    579

    654

    690 780

    690 780

    839 839

    839 839

    839 839

    839 839

    683 a03 883

    895 1.001

    1.105 1.222 883

    716 812

    812

    812 812

    854 812

    740 841 885

    885 885

    960 967

    967 967

    1.005

    967

    1.052 1.086

    1.066

    1,066

    1,252 1,287 1,287

    1,287

    -

    579

    654

    - -

    740 841

    957 1.005 1.005

    960 1,093

    1,237 1,237 1.287 1.237

    -

    -

    - 579 654

    -

    690 780

    686 686

    - -

    869 869 871 871

    -

    871 871 942 886

    1.007 886 1.007 886

    - 871 942

    1.007 1.007

    895 917 1.001 992 1.103 1.060 1.103 1.060

    774 774 774 774

    846 823 941 623

    -

    -

    922 1.008

    1,120

    - -

    922 979

    979 - - -

    -

    -

    - -

    - - -

    -

    -

    -

    - - -

    - -

    -

    686

    688

    871 886

    866 686

    917 932 932

    932

  • 2-14 PETROLEUM ENGINEERING HANDBOOK

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued)

    1 2 3 4 5 6 7 a 9 10 11 12

    Nominal Threaded and Coupled nn Weight,

    Threads and Wall Drift

    OD Coupling Thickness ID Drameter (In.) (Ibmlft) Grade (In 1 (in ) (In.)

    as/a 36.00 N-B0 0.400 7.825 7.700

    Extreme Lfne

    OD SpZial OD Pipe-Body of Clearance Drift of Box Collapse Yield

    Coupling Coupling Diameter Powertight Resistance Strength (in.) On ) (in.) (in ) (Psi) (1,000 Ibf)

    9 625 9.125 7.700 7.600 7.500 7.386

    7.700 7.600 7.500 7.386

    7.700 7.600 7.500 7.386

    9.120 9.120 9.120 9.120

    9.120 9.120 9.120 9.120

    9.120 9.120 9.120 9.120 -

    9.120 9.120 9.120

    - -

    -

    -

    4,100 a27 40.00 N-80 0.450 7.725 7.600 9.625 9.125 44.00 N-80 0.500 7.625 7.500 9.625 9.125

    5.520 925 6,950 1,021

    49 00 N-80 0.557 7.511 7.386 9.625 9.125

    36.00 c-90 0.400 7.025 7.700 9.625 9.125 40.00 c-90 0.450 7725 7.600 9.625 9.125 44.00 c-90 0.500 7.625 7.500 9.625 9.125 49.00 c-90 0.557 7.511 7.386 9.625 9.125

    36.00 c-95 0.400 7.825 7.700 9.625 9.125 40.00 c-95 0.450 7.725 7.600 9.625 9.125 44.00 c-95 0.500 7.625 7.500 9.625 9.125 49.00 c-95 0.557 7.511 7.386 9.625 9.125

    36.00 HC-95 0.400 7.825 7.700 9.625 9.125 40.00 tic-95 0.450 7.725 7.600 9.625 9.125 44.00 HC-95 0.500 7.625 7.500 9.625 9.125 49.00 HC-95 0.557 7.511 7.386 9.625 9.125

    40.00 P-110 0.450 7.725 7.600 9.625 9.125 44.00 P-110 0.500 7.625 7.500 9.625 9.125 49.00 P-110 0.557 7.511 7.386 9.625 9.125

    40.00 Q-125 0.450 7.725 7.600 9.625 9.125

    8.580 1,129

    4.250 930 5,870 1,040 7.490 1,149 9,340 1,271

    4,350 982 6,020 1,098 7.740 1,212 9,710 1,341

    6,060 982 7,900 1,098 9,100 1.212 10,400 1,341

    6,390 1,271 8,420 1,404 10,740 1,553

    6,630 1,445 8,980 1,595 11,660 1,765

    9,640 1,914 12,950 2,118

    7.600 7.500 7.386

    * 44.00 Q-125 0.500 7.625 7.500 9.625 9.125 49.00 Q-125 0.557 7.511 7.386 9.625 9.125

    * 44.00 v-150 0.500 7.625 7.500 9.625 9.125 * 49 00 v-150 0.557 7.511 7.386 9.625 9.125 -

    9% 3230 36.00

    3600 4000

    36.00 40.00

    4000 43.50 47.00 5350

    40.00 43.50 4700 53.50

    40.00 43.50 4700 53.50

    4000 43.50 47.00 5350

    40.00 43.50 47.00 53.50

    * 40.00 * 43.50 * 4700 f 53.50

    H-40 H-40

    J-55 J-55

    K-55 K-55

    c-75 c-75 c-75

    0.312 0.352

    0.352 0 395

    c-75

    0352 0.395

    0.395 0.435 0472 0.545

    L-80 0.395 L-80 0.435 L-80 0 472 L-80 0.545

    N-B0 0.395 N-80 0.435 N-80 0 472 N-80 0 545

    c-90 c-90 c-90 c-90

    c-95 c-95 c-95 c-95

    0.395 0.435 0.472 0.545

    HC-95

    HC-95 HC-95 HC-95

    HC-95

    HC-95

    P-110 P-110 P-110

    0.395

    0.595

    0.435 0.472 0.545

    0.625

    0.395 0.435

    0435

    0.472 0545

    0.472 0545

    9.001 a.921

    a.921 a835

    8921 8.835

    8.835 a.755 8.681 a.535

    a.835 a.755 a.681 a.535

    a.835 a.755 a.681 a.535

    a.835 a.755 8.681 a.535

    8.835 a.755 a.681 8535

    8.835 a755 a.681 8.535 a435 8.375

    8 755 8681 a535

    8.845 8.765

    8.765 8679

    8765 8.679

    8.679 a.599 8.525 a.379

    8.679 a.599 a525 a.379

    8.679 a 599 8.525 a.379

    8.679 8.599 a.525 a.379

    8.679 8.599 a.525 8.379

    8.679 a.599 a.525 a.379 a 279 a.219

    a.599 a.525 a.379

    10.625 10.625

    10.625 10.625

    10.625 10.625

    10.625 10.625 10.625 10.625

    10.625 10.625 10.625 10.625

    10.625 10.625 10.625 10.625

    10.625 10.625 10.625 10.625

    10.625 10.625 10.625 10.625

    10.625 10.625 10.625 10.625 10625 10.625

    10.625 10.625 10.625

    -

    10.125 10.125 a.599

    10125 10.125

    10.125 10.125 10.125 10.125

    10.125 10.125 10.125 10.125

    10.125 10.125 10.125 10.125

    10.125 10.125 10.125 10.125

    10.125 10.125 10.125 10.125

    10.125 10.125 10.125 10.125 10.125 10.125

    -

    a.599

    8.599 8 599 8.525 8.379

    a.599 8.599 a.525 8.379

    a.599 8.599 a.525 a.379

    a.599 8.599 a.525 a.379

    8.599 a.599 a.525 a.379

    - -

    10.125 8.599 10.125 8525 10.125 8.379

    -

    - 10.100

    10.100

    10.100 10.100 10.100 10.100

    10.100 10.100 10.100 10.100

    10.100 10.100 10.100 10.100

    10.100 10.100 IO. 100 10.100

    10.100 10.100 10.100 10.100 - -

    -

    10.100 10.100

    1,370 1.720

    2,020 2,570

    365 410

    564 630

    2,020 564 2.570 630

    2,990 859 3.730 942 4,610 1.018 6,350 1.166

    3.090 916 3.810 1.005 4.760 1,086 6.620 1,244

    3.090 916 3.810 1,005 4.760 1,086 6,620 1,244

    3,250 4.010 5.000 7.120

    3.320 4,120 5,090 7,340

    4.230 5,600 7,100 8,850 9,950 10,500

    4.420 5,300

    1,031 1,130 1,221 1,399

    1,088 1,193 1,289 1,477

    1,088 1,193 1,289 1,477 1,604 1,679

    1,381 1,493

    * 5840 * 61.10

    43.50 47.00 53.50 10.100 7,950 1,710

  • CASING, TUBING, AND LINE PIPE 2-15

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued)

    13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

    Joint Strength" (1,000 Ibf)

    Threaded and Couoled Internal Pressure Reslstancet (PSI)

    Buttress Thread

    Plain Special

    End Regular Cll?XaWe

    or Round Coupling Coupling

    Extreme Thread Same Higher Same Htghet

    Ltne Short Lona Grade Grade Grade Grade

    Buttress Thread

    Special

    Round Regular Clearance

    Thread Coupling Soecial Couphng

    Reaular Hloher

    Short Long Cotpllng Grade*

    Clearance Higher Coupling Gradei

    Extreme Lane

    Standard Opttonal

    883 883 883 003

    927 927 927

    Jomt Joint

    917 992

    1.060 1.060

    963

    1.042 1.113

    917 992 932 932

    963 979 979

    7.300 8.220 9.130

    10170

    7.710

    8.670 9.640 10.740

    7.710

    8.670 9 640

    I0740

    10.040

    11 160

    12430

    11.410

    12.680 14130

    15220

    16.950

    2.270

    2.560

    3.520

    3.950

    3.520 3,950

    5,390 5,930

    6,440

    7,430

    5.750 6,330

    6,870

    7,930

    5,750 6,330 6,870

    7,930

    6,460

    7,120 7,720 8.920

    6,820 7,510

    8,150 9,410

    6820 7,510

    8,150 9,410

    10,280 10,800

    8 700

    9,440 10,900

    - -

    - - - - - -

    - - -

    -

    - -

    - - -

    ~ 749 928 - 858 1.038 - 965 1.146 - 1.085 1.268

    - 789 976

    ~ 904 1.092 - 1.017 1.206

    6.340 - 6.340 - 6.340 - 6.340 -

    6,340 - 6.340 ~ 6.340 - 6.340 -

    6.340 6.340

    6.340 6.340 6.340 6.340 6.340 6.340

    6.340 6.340

    6.340 6.340

    6.340 6.340

    6.340 -

    6.340 - 6,340 -

    7.300 7 300 8.220 8.220 9.130 9.130

    10.170 10.170

    7,710 7,710

    8.670 8.670 9.640 9.640 10.380 10.740

    7,710 7.710

    8.670 8.670 9640 9.640

    10.380 10.740

    10.040 10.040

    10.380 11.160

    10.380 11.230

    10.380 11.230

    10.380 11.230 10.380 11.230

    - - -

    - -

    1.008 1,127 1,244

    1,377

    1,288 1,423

    1,574

    1,008

    1,104 1 104

    1.104

    1.288 1.412 1,412

    1.113 979

    -

    ,114 1.334

    800 1.008 916 1.127 ,030 1.244 ,159 1,377

    ,055 1.288 ,186 1.423

    ,335 1.574

    ,182 1,415

    ,330 1.562 ,496 1.728

    ,591 1.859 ,789 2,056

    - -

    453 639 520 714

    489 755 561 843

    694 926 776 1,016

    852 1.098

    999 1,257

    927

    971

    971 971

    971

    1,103

    1.103 1,103

    1.192 1.192

    1,413 1.413

    639 714

    755 843

    926 934

    934

    934

    934 934

    934

    934

    979

    983 983 983

    983 983

    983 983

    1.032 1.032

    1.032 1.032

    1.082 1.082

    1.082 1.082 1.082

    1.082

    1.229

    1.229 1,229

    7.710

    8.670 9 640

    10,740

    10.040

    11 160

    11.230

    -

    - 1.165

    1.165 1.165

    -

    1.240 1.326

    1.326

    - -

    10.380 11.230 - 6.340 - 10.380 11.230 - 6,340 ~

    -

    2,270

    2,560

    3.520

    3.950

    3,520 3.950

    -

    -

    -

    - -

    -

    - -

    -

    - -

    -

    -

    254

    294

    394

    452

    423 486

    -

    -

    -

    - 727 947 813 1.038 893 1.122

    - 1.047 1.286

    - 737 979 - 825 1,074 - 905 1,161 - 1,062 1,329

    - 804 1,021 - 899 1.119

    - 987 1.210 - 1 157 1386

    - 847 1.074 ~ 948 1 178

    - 1.040 1.273 - 1220 1458

    - 858 1,106 ~ 959 1,213

    - 1,053 1,311 ~ 1,235 1,502 - 1.357 1,631

    - 1.430 1,707

    - 1.106 1.388 ~ 1,213 1,500 - 1422 1,718

    639

    714

    755 843

    639 714

    755 843

    3.520 3,520 3,520 3,520 3.520

    3.950 3,950 3.950 3.660 3.950

    3.520 3,520 3,520 3.520 3.520 3.950 3,950 3.950 3.660 3.950

    5,390 5.390 - 4.990 - 5.930 5,930 - 4.990 -

    6,440 6,440 - 4.990 -

    7,430 7.430 - 4.990 -

    770

    975

    975 975

    1.032 1.173

    770

    975 975

    1.032

    979 1,074 1.161 1.229

    - -

    -

    - -

    1.173

    1.027 1,027 1.086 1.235

    027 027 086 ,235

    ,078 ,078

    ,141 ,297

    975

    975 975

    1.032

    1.053

    975 975

    1.032 1.053

    1.027

    1.027 1.086

    1.109

    027 027 086 ,109

    ,078

    ,078 ,141 ,164

    1.106 1.213

    1,229 1,229 1.229 1.229

    - -

    -

    -

    1.388 1.283 1,283 1500 1.358 1.358 1.573 1,544 1,386

    5,750 5,750 - 5.140 - 6,330 6.330 - 5140 - 6,870 6,870 - 5,140 -

    7,930 7,930 - 5.140 -

    979 1,074 1,161 1,329

    5,750 5.750

    6.330 6,330 6.870 6.870 7.930 7.930

    6.460 7,120

    7.720 8.460

    6.820 7.510

    8.150 8.460

    6 820 7,510

    8,150 8.460 8,460 8.460

    8.700

    9,440 9.670

    6.460 7.120

    7,720 8,920

    6.820

    7.510

    8,150 8.460

    6.820 7,510

    8.150 9160

    9.160 9,160

    8.700

    9.160 9.160

    5,750 6,330 6.870 7.930

    5,140 5.140 5.140 5.140 5.140 5140 5.140 5.140

    5.140 - 5.140 -

    5.140 - 5,140 -

    5,140 - 5.140 -

    5.140 - 5.140 -

    5,140 5,140 5,140 5,140

    5.140 5,140 5.140 5.140 5.140 5,140

    5.140 5,140

    5.140 5.140 5,140 5,140 5.140 5140

    6,820 7,510

    8,150 9,160 9,160

    9.160

    8.700 9.160 9,160

    1 106 1213

    1311

    1502 1631

    1707

    1388

    1500 1718

  • 2-16 PETROLEUM ENGINEERING HANDBOOK

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued) 1 2 3 4 5 6 7 a 9 10 11 12

    Nominal Weiqht, Threads and

    Threaded and Coupled

    OD

    Wall Dnft

    Extreme Lrne

    OD Specral of Clearance Drrft

    OD Pipe-Body of Box Collapse Yield

    Powertight Resrstance Strenath

    (In ) (Psi) (l.OOO-fbf) Grade 00 Coupling (in.) (Ibm/ft)

    Thrckness ID (in.) (in.)

    Diameter (in.)

    9% 47.00 Q-125 0.472 8681 a525 53.50 Q-125 0.545 8535 8.379

    f 58.40 Q-125 0.595 8435 8279 f 61.10 Q-125 0.625 a375 a219

    Coupling Coupling Dtameter (In.) (in.) (in.)

    10.625 10.625 10.625 10.625

    10.625 10625 10625 10.625

    -

    10.125 10.125

    10.125 10.125 10.125 10.125

    H-40 0.279 10 192 10.036 11.750 H-40 0.350 10.050 9 894 11.750

    J-55 0.350 10.050 9.894 11.750 J-55 0.400 9.950 9 794 11.750 J-55 0.450 9.850 9.694 11.750

    K-55 0 350 10.050 9.894 11.750 K-55 0.400 9.950 9.794 11.750 K-55 0.450 9.850 9.694 11.750

    c-75 0.450 9.850 9.694 11.750 c-75 0.495 9 760 9.604 11.750

    L-80 0.450 9.850 9.694 11.750 L-80 0.495 9.760 9.604 11.750

    N-80 0.450 9.850 9.694 il.750 N-80 0.495 9.760 9.604 11.750

    -

    11.250 11.250 11.250

    11.250 11.250 11.250

    11.250 11.250

    11.250 11.250

    11.250 11.250

    11.250 11.250

    11.250 11.250

    11.250 11.250 11.250 11.250 11.250

    11.250 11.250 11.250 11.250

    11.250 11.250 11.250 11.250 11.250 11.250

    11.250 11.250 11.250 11.250 11.250

    - -

    9.794 11.460 9 694 11.460

    51.00 c-90 0.450 9.850 9.694 11.750 55.50 c-90 0.495 9.760 9.604 11.750

    9.850 9.694 11.750 9.760 9.604 11.750

    9.850 9.694 11.750 9.760 9.604 11.750 9.660 9.504 11.750 9.560 9.404 11.750 9.450 9.294 11.750

    9.850 9.694 11.750 9.760 9.604 11.750 9.660 9.504 11.750 9560 9.404 11.750

    9.760 9.604 11.750 9.660 9.504 11.750 9.560 9.404 11.750 9.450 9.294 11.750 9.406 9.250 11.750 9.282 9.126 11.750

    9.660 9.504 11.750 9.560 9.404 11.750 9.450 9.294 11.750 9.406 9.250 11.750 9.282 9.126 11.750

    9.794 9.694

    9.694 9604

    9 694 9604

    9.694 9.604

    9.694 9.604

    9.694 9.604

    9.694 9.604 9.504 -

    12.750

    12.750 12.750 12.750

    12.750 12.750 12.750

    -

    -

    - - -

    -

    - - -

    - - -

    5,640 8,440 10,530 I 1.800

    8,960 11.560 13,120 18,800

    -

    11.430 11.460

    11.460 11.460

    11.460 11.460

    11.460 11 460

    11.460 11.460

    11.460 11.460

    -

    - -

    11.460 11.460 11.460

    -

    - -

    - -

    1.697 1,943 2,110 2,209

    2,332 7,532 2,651 3,075

    . 53.50 v-150 0.545 a535 1 58.40 v-150 0.595 8435

    a379 8 279 8 219 * 61.10 v-150 0 625 8375

    1 70.30 v-150 0.734 8157 8001

    10 % 32 75 40.50

    840 1.390

    1.580 2.090 2,700

    1,580 2,090 2,700

    3,110 3,920

    3.220 4,020

    3,220 4,020

    3,400 4,160

    3,480 4,290

    4,460 5,950 7.550 8,640 9,600

    3,660 4,610 5,880 7.500

    4.850 6.070 7.920 9.990 10,810 13,150

    6,550 8,320 10,880 11,900 14,790

    367 457

    629 715 801

    629 715 801

    1,092 1,196

    1,165 1.276

    1,165 1,276

    1.310 1,435

    1,383 1,515

    1.383 1,515 1.660 1,803 1.959

    1,602 1.754 1,922 2,088

    1,993 2,184 2.373 2,573 2,660 2,887

    2,621 2,847 3,094 3,191 3,464

    40.50 45.50 51.00

    40.50 45 50 51.00

    51 00 5550

    51.00 55 50

    51 00 5550

    51.00 55.50

    c-95 c-95

    0.450 0.495

    * 51.00 HC-95 0.450 t 55.50 w-95 0.495 + 60.70 HC-95 0.545 t 65.70 HC-95 0.595 * 71.10 HC-95 0.650

    51.00 P-110 0.450 55.50 P-110 0.495 60.70 P-110 0.545 65.70 P-110 0.595

    I/ 55.50 60.70 65.70

    . 71.10 1 73.20 1 79.20

    Q-125 0.495 Q-125 0.545 Q-125 0.595 Q-125 0.650 Q-125 0.672 Q-125 0.734

    60.70 / 65.70 * 71.10 * 73.20

    v.150 v-150 v-150 v-150 v-150

    0.545 0.595 0650 0.672 0.734 * 79.20

    11% 42.00 H-40 0.333 11.084 10.928

    I 1.000 10.844 10.880 10.724 10.772 10.616

    I 1.000 10.844 10.880 10.724 10.772 10.616

    1.070 478

    1.510 737 2.070 850 2.660 952

    1.510 737 2.070 850 2.660 952

    47.00 J-55 0.375 54.00 J-55 0.435 60.00 J-55 0.489

    47.00 K-55 0.375 54.00 K-55 0.435 60.00 K-55 0.489

  • CASING. TUBING. AND LINE PIPE 2-17

    TABLE 2.3~MINIMUM PERFORMANCE PROPERTIES OF CASING (continued)

    13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Internal Pressure Reslstancet (psi)

    JOIN Strenglh" (1 000 Ibf)

    Threaded and Coupled

    Buttress Thread Buttress Thread

    Regular Couplmg Specral Htgher

    Grade' Clearance Couplrng

    Speual Clearance Coupling

    Higher Grade'

    Special

    Clearance Coupling

    Same Hlqher

    Plaln

    End or Round

    Extreme Thread

    Regular Coupling

    Same Hlqher

    Round Thread

    Extreme Line

    Regular

    - - -

    -

    Standard Optronal JOlnt Joint

    -

    1326 1328

    1.574 1,574 1,574 1.574

    - -

    700 796

    822

    819 931

    1,041

    1,041

    1.041

    1.041 1,041

    1.096

    1.096

    1,112 1,112

    1,151 1151

    1,223 1.223

    1.223

    1.223 1.223

    1.370 1.370 1.370 1.370

    1.501 1.501 1501

    1.501 1.501 1.501

    1.779 1,779 1.779

    1.779 1779

    Long

    9,670

    9.670 9.670 9670

    9670 9670 9670 9670

    -

    Grade Grade Grade Grade Short Long Couplmg

    9160

    9.160

    9 160 9.160

    9.160 9.160 9.160 9.160

    -

    - -

    5,140

    5.140

    5 140 5.140

    5 140 5.140 5 140 5 140

    --

    1.650

    1 890

    2052 2149

    2.251 2.444 2,553 2.812

    - -

    3,130

    3.580 4.030

    3.130 3.560 4.030

    5.490

    6.040

    5,860 6.450

    5.660 6,450

    6,590 7,250

    3,130 3,290

    3.290

    3,130

    3.560 4.030

    3,130 3.580 4,030

    -

    3.130 3,560

    4.030

    3.130 3,290 3,290

    3.130 3,580 4.030

    - 5.860 6.450

    -

    4,150

    4.150

    -

    6.960 7.450 -

    6.960 6.960 7.450 7.450

    7.450 7.450

    7.450 7.450 7.450 7.450

    7.450 7.450

    7.450 7.450

    -

    -

    4.150

    4.150

    4.150 4,150

    4.150 4.150

    4.150 4.150

    4.150 4.150

    4.150 4.150

    4.150

    4.150 4.150

    4.150 4.150

    4.150 4.150

    4,150

    4.150 4.150

    4.150

    4.150 4,150

    4.150 4.150 4 150

    ~ 1.361

    ~ 1595 - 1754 - 1848

    - 1595 .- 1754

    - 1.848 - 2 185

    205 - 314 -

    420 -

    493 ~

    565 -

    450 - 528 - 606 -

    756 ~

    843 ~

    794 ~ 884 -

    a04 ~

    895 -

    632 - 771 ~~

    927 - 1032 -

    737 - 821 -

    914 ~

    1005 - 1105 -

    1080 - 1203 ~

    1338 - 1472 -

    1351 - 1503 - 1.653 -

    1.817 - 1.862 -

    2063 -

    i 798 - 1,918 - 2174 -

    2.252 ~ 2469 -

    - 4.150 4.150

    4.150

    4.150 4.150

    4.150 4.150

    4.150 4.150

    -

    -

    700 796

    891

    819 931

    1.043

    1.160 1.271

    1,190 1.303

    1.228 1.345

    1,287 1,409

    1.354 1.483

    1.392 1.524

    1.670

    1.614 1.971

    1.594 1,745 1.912

    2.077

    1.925 2,109 2.291

    2.489 2.568

    2.639

    2 513

    2.730 2 366 3,060 3.127

    Line Short

    10.730 ~

    12,390 - 13.520 - 14,200 -

    12.390 - 13,520 ~

    14.200 - 16.680 -

    1.820 1.620

    2,280 2.280

    3.130 3.130

    3.580 3.580

    4.030 4.030

    3.130 3.130

    3.580 3.580 4.030 4,030

    5.490 5.490

    6.040 6.040

    5.860 5.660 6,450 6.450

    5.660 5.660

    6.450 6.450

    6.590 6.590 7.250 6,860

    6.960 6.880 7660 6 880

    6.960 6860 7.660 6,880

    6,430 6.880

    9.200 6,880 10.050 6.880

    8.060 7.860 8.860 7,660

    9.760 7,860 10.650 7.860

    10.070 7,860 11.090 7,860 12,110 7,860

    13.230 7.860 13,670 7,860 14,940 7,860

    13,310 7,860 14.530 7,860 15.670 7.660

    16.410 7.860 17.920 7.860

    1,980 1.980

    3.070 3,070 3.560 3,560

    4,010 4,010

    3.070 3.070 3.560 3.560

    4.010 4.010

    807 931 ,042

    935 079

    ,208

    -

    700 796

    891

    819 931

    1.043

    -

    I 228

    1.345

    -

    1389 1.389 I 389

    1.389 ,389

    1534 ,745 ,754 ,754

    -

    -

    -

    - -

    -

    975 1092

    -

    1.236 1.363

    1383 1515

    1.363 1.515

    1.456 1,595

    1,456 1.595

    1.529 1.675

    - -

    -

    1820 1993 2000

    --

    - -

    -

    700

    796 691

    819 931

    1,043

    - .-

    -

    1.228 1.345

    -

    -

    - -

    1.392 1.524

    1.670

    1.814 1.971

    1.594 1.745 1.912 2,077

    -

    -

    -

    - -

    3,070 3.070 3.560 3.560

    4.010 4,010

    3,070 3070 3.560 3,560

    4.010 4,010

    307 -

    477 -

    568 - 649 -

    509 - 606 -

    693 -

    - 807 931

    1,042

    935 1.079

    1.208

    -

    -

  • 2-18 PETROLEUM ENGINEERING HANDBOOK

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASlNG(conlinued)

    1 2 3 4 5 6 7 8 9 IO 11 12

    Nominal Threaded and Coupled

    Weight. OD Extreme Line

    Threads 00 Special OD and Wall Drift of Clearance Drift of Box Collapse

    OD Coupling Thickness ID Diameter Coupling Coupling Diameter Powertight Resistance (in.) (Ibmift) Grade (in.) (in 1 (in.) (in.) (in.) (in.) (in.) (psi)

    1 1% 60.00 c-75 0.489 10.772 10.616 12.750 - - 3,070

    60.00 L-80 0.489 10.772 10.616 12.750 - - 3,180

    60.00 N-80 0.489 10.772 10.616 12750 - 3,180

    60.00 c-90 0.489 10.772 10.616 12.750 - 3,360

    60.00 c-95 0.489 10.772 10.616 12750 3,440

    (r 60.00 HC-95 0.489 10.772 10.616 12.750 4,410

    60.00 P-110 0.489 10.772 10.616 12.750 3,610

    60.00 Q-125 0.489 10.772 10.616 12.750 - 3,680 * 66.70 Q-125 0.547 10.656 10.500 12.750 - - - 4,980

    f 66.70 v-150 0.547 10.656 10.500 12.750 - - - 5,200

    13% 48.00 H-40 0.330

    54.50 J-55 0.380 61.00 J-55 0.430 68.00 J-55 0.480

    54.50 K.55 0.380 61.00 K-55 0.430 68.00 K-55 0.480

    68.00 c-75 0.480 72.00 c-75 0.514

    68.00 72.00

    68.00 72.00

    L-80 L-80

    N-80 N-80

    68.00 72.00

    68.00 72.00

    . 72.00 f 86.00

    68.00 72.00

    c-90 c-90

    c-95 c-95

    HC-95 HC-95

    P-110 P-110

    72.00 . 76.60 * 92.50

    * 92.50 f 100.30

    Q-125 Q-125 Q-125

    v-150 v-150

    0.480 0.514

    0.480 0.514

    0.480 0.514

    0.480 0.514

    0.514 0.625

    0.480 0.514

    0514 0.547 0672

    0672 0.734

    12.715 12.559 14.375

    12.615 12.459 14.375 12.515 12.359 14.375 12.415 12.259 14.375

    12.615 12.459 14.375 12.515 12.359 14.375 12.415 12.259 14.375

    12.415 12.259 14.375 12.347 12.191 14.375

    12.415 12.259 14.375 12.347 12.191 14.375

    12.415 12.259 14.375 12.347 12.191 14.375

    12.415 12.259 14.375 12.347 12.191 14.375

    12.415 12.259 14.375 12.347 12.191 14.375

    12.347 12.191 14.375 12.125 11.969 14.375

    12.415 12.259 14.375 12.347 12.191 14.375

    12.347 12.191 14.375 12.281 12.125 14.375 12.031 11.875 14.375

    12.031 11.875 14.375 11.907 11.751 14.375

    16 65.00 H-40 0.375 15.250 15.062 17.000

    75.00 J-55 0.438 15.124 14.936 17.000 84.00 J-55 0 495 15.010 14.822 17.000

    75.00 K-55 0438 15.124 14.936 17.000 84.00 K-55 0.495 15.010 14.822 17.000

    - - - - - - - - - - -

    - - - - - - -

    - - - - - - - - - - - - - -

    - - -

    - - - - - -

    - - - - - - - - - - - -

    740 541

    1,130 853 1,540 962 1,950 1,069

    1,130 853 1,640 962 1.950 1,069

    2.220 1,458 2,600 1,558

    2,260 1,556 2,670 1,661

    2.260 1,556 2.670 1.661

    2,320 1,750 2,780 1,869

    2,330 1,847 2,820 1,973

    3,470 1,973 6,240 2,378

    2,330 2,139 2,880 2,284

    2,800 2.596 3,490 2,756 5,950 3,352

    6,400 4,023 8,090 4.373

    Pipe-Body Yield

    Strength (1,000 Ibf)

    1,298

    1,384

    I,384

    1,557

    1,644

    1,644

    1,903

    2,162 2,407

    2,888

    - - - 630 736 - - - 1,020 1,178 - - - 1,410 1,326

    - - - 1,020 1,178 - - - 1,410 1,326

    ~8% 87.50 H-40 0.435 17.755 17.567 20.000 - - - 630' 994 87.50 J-55 0.435 17.755 17.567 20.000 - - - 630' 1,367

    87.50 K-55 0.435 17.755 17.567 20.000 - - - 630' 1,367

    20 94.00 H-40 0.438 19.124 18.936 21.000 - - -

    94.00 J-55 0.438 19.124 18.936 21.000 - - - 106.50 J-55 0.500 19.000 18.812 21.000 - - - 133.00 J-55 0.635 18.730 18.542 21.000 - - -

    94.00 K-55 0.438 19.124 18.936 21.000 - - 106.50 K-55 0.500 19.000 18.812 21.000 - - -

    133.00 K-55 0.635 18.730 18.542 21.000 -

    1

    520' 1,077

    520* 1,480 770' 1.685 ,500 2,125

    520' 1.480 770' 1,685 ,500 2,125 Non-API WlQhtS or grades

  • CASING, TUBING, AND LINE PIPE 2-19

    TABLE 2.3-MINIMUM PERFORMANCE PROPERTIES OF CASING (continued) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

    Joint Strength * (1,000 Ibf)

    Internal Pressure Reslstancet (PSI) Threaded and Coupled

    Buttress Thread Buttress Thread

    Spew

    Regular Clearance Special

    Coupling ^ Louprlng Round

    Regular Clearance Extreme Line

    Same Higher Same HIoh& Thread Coupilng Special Couphng

    Grade Grade Grade

    Reqular Hlaher Clearance Grade Short Lono Cot&a Grade*

    Hrgher

    Couolina Grade * Standard Optronal

    Jornt Joint

    Plain

    End or

    Extreme

    Round

    Thread

    Long

    -

    -

    5.460 -

    5,830 -

    5,830 -

    6,300 - -

    6.300 - -

    6.300 - -

    6,300 6,300 - 6.300 -

    6,300 - -

    6,300 - -

    Line Short

    5,460 5,460

    5,830 5,820

    5,830 5,820

    6,550 5.820

    6,920 5,820

    6,920 5.820

    8,010 5.820 9.100 6.650

    10,180 6.650

    12.220 6,650

    1,730 1.730

    2.730 2.730 3,090 3,090

    3,450 3.450

    2,730 2.730

    3.090 3.090 3.450 3.450

    4.710 4,550 5.040 4,550

    5.020 4.550 5,380 4,550

    5.020 4.550 5,380 4,550

    5.650 4.550

    6.050 4.550

    5,970 4,550

    6,390 4,550

    6,390 4,550

    7,770 4,550

    6,910 4,550

    7400 4.550

    8,400 4.550 8,950 4,550

    10,990 4.550

    13,190 4.550

    14,410 4.550

    1640 1.640

    2630 2.630

    2,980 2.980

    2,630 2.630

    2.980 2,980

    -

    -

    869 - 1.361

    913 - 1,399

    924 - 1,440

    ,011 - 1,517

    ,066 - 1,596

    ,078 - 1,638

    ,242 - 1.877 ,395 - 2,074

    ,582 - 2.308

    ,893 - 2,752

    322 - -

    514 - 909 595 - 1.025

    675 - 1,140

    547 - 1,038

    633 - 1,169 718 - 1.300

    905 - 1,496 978 - 1,598

    952 - 1,545

    -

    1,440 -

    -

    1,877

    -

    909 - 1,025 1,140

    1,038 - 1,169 1,300 -

    -

    -

    -

    1585

    1,693

    -

    -

    2,079 - 2.221

    -

    -

    1,200

    1,351

    1,331

    1,499

    1329

    1,427

    1402

    1 596 -

    2,012

    1,479 1 683 2 123

    -

    - -

    - - - - - - - - -

    - - - -

    - -

    2,730 2,730 3,090 3,090

    3,450 3,450

    2.730 2,730

    3.090 3,090 3,450 3450

    4,710 - 4,930 -

    4,930 - 4.930 -

    4,930 4,930 4,930 4.930

    4.930 - 4,930 -

    4,930 ~

    4,930 -

    4.930 -

    4.930 -

    4,930 4.930 4,930 4.930

    4.930 - 4,930 -

    4.930 -

    4.930 -

    4,930 -

    - - - - -

    -

    2.630 2.630 2,980 2.980

    2,630 2.630

    2.980 2.980

    1.630 1.630 -

    2.250 2.250 -

    2,250 2,250 -

    1.530 1.530 1,530

    2.110 2.110 2.110

    2.410 2.400 2.400

    3.060 2.400 2.400

    2.110 2.110 2,110

    2.410 2.400 2.400 2.320 2.320 3.060 2,400 2.400 2.320 2,320

    2.250 2.250

    2.250 2,250

    -

    2.110 2.110

    2.320 2.320

    2.320 2.320

    2.110 2.110

    - - -

    1.029 - 1,650

    963 - 1.585 1,040 - 1.693

    1,057 - 1.683 1,142 - 1,797

    1.114 ~ 1,772

    1.204 - 1.893

    1.215 - 1,935

    1.507 - 2,333

    1,297 - 2,079 1,402 - 2.221

    1,576 - 2,463 1.690 - 2.615

    2.113 - 3.181

    2.529 - 3,795

    2,776 - 3.863

    -

    -

    -

    439 - -

    710 - 1.200 817 - 1.351

    752 - 1,331

    865 - 1.499

    960 1.113 1.683 1253 1.453 2123

    559 - -

    754 - 1.329

    794 - 1.427

    -

    -

    581 - -

    784 907 1.402

    913 1.057 1,596 1.192 1.380 2,012

    824 955 1.479

    -

    -

    -

    - -

    - - - - -

    - .-. - - -

    - -

    - - - - - -

    -

    -

  • 2-20 PETROLEUM ENGINEERING HANDBOOK

    TABLE 2.4a-MINIMUM COLLAPSE RESISTANCE UNDER AXIAL LOAD, GRADE H-40

    Axial Stress. ps

    - 10.000 - 5 000 0 5 000 10.000 15000 20000 25.000 30.000 35.000 40.000 45,000 50000 Weqht AE2, (Ibmilt) d,ie (W In 1

    95 21 95 2 766

    14 22 54 4 029

    Collapse Pressure. ps,

    2.930 2.860 2.760 2640 2.500 2.320 2.100 1.840 - - - - -

    2.770 2 710 2 620 2 510 2.360 2.220 2.010 1.760 -

    36 2734 10254 1.330 1.150 1 770 1,670 1.590 2 100 2.070 2.020 1 920 I a50 1.460 1.970

    40

    405 455 51

    47 54 60

    54 5 61 68

    75 84

    075

    94 1065 133

    2437 11454

    30 71 11435 2688 13006 2369 14 561

    3133 13401 2701 15463 2403 173

    352 15514 31 1 17487 2786 19445

    3653 21414 3232 24112

    4262 24858

    4566 26918 40 30631 315 38632

    1.630 1.280

    1.090 960 1.370 1.160 1.680 1.310

    1.050 930 1.360 1.170 1.660 1300

    a60 770 1060 940 1290 1 120

    BOO 720 1 DO0 090

    580 530

    490 470 670 610

    1040 920

    2.290