Yokogawa South Africa (Pty) Limited 764 Golf Club Terrace, Constantia Kloof, RoodepoortEmail: nico.marneweck@za.yokogawa.comPhone: (+27) 011-831 6300 Fax: (+27) 011-831 6350

Field Instrumentation Customised Product Training Programme

ObjectivesThe training course is designed to provide the delegates with necessary skills to understand and improve measurements solutions facilitated in the Industrial Automation Industry. Enable delegates to understand the fundamental and terminology of the selected topics.

The training will include background information, overview of terminology, principle of operation, standard applications, installation requirements and safety instruction. The Field Instrumentation Customised Training includes the following specialist topics:

� Communication Protocols in Industrial Automation � Introduction to Industrial Network Systems

� Network System Fundamentals � Yokogawa Industrial Network

� Fault Finding Techniques in Industrial processes � Process Control (PID) technology � Gas Chromatograph GC8000 � Zirconia O2 Analyser and � Final Control Element (Valves)

Who should attend?The course is suitable for Artisans, junior Instrument Engineers, Technicians, Technologists, Project Engineers and Supervisors who required a practical knowledge for selection and implementation of measurement systems.

Prerequisite KnowledgeMinimum requirement is a Control & Instrumentation Trade Test with related Electrical Engineering subjects. Delegates with minimum of five years industrial automation orientated plant knowledge can also participate in the course.

DurationThe training can be facilitated consecutively over a 5-day period or customers can select 1-day or 2-days Field Instrumentation Customised Training topics. Delegates can attend a full 5-day course or select the areas they are particularly interested in learning more about.

Programme selection� Communication Protocols in Industrial Automation – 1 day workshop

� History� Analog Pneumatic protocol� Analog 4-20mA protocol� HART / Smart Digital protocol� Profibus PA / DP Digital protocol� Foundation Fieldbus FF Digital protocol� Modbus serial communication Digital protocol

Yokogawa South Africa (Pty) Limited 764 Golf Club Terrace, Constantia Kloof, RoodepoortEmail: nico.marneweck@za.yokogawa.comPhone: (+27) 011-831 6300 Fax: (+27) 011-831 6350

� Introduction to Industrial Network Systems – 2 day workshop1st day Network System Fundamentals � Introduction to Networks � Network Topology� Network Links� Network Nodes� Communication Protocols� Basic Network Configuration� Setting up a Home / Office based network

2nd day Yokogawa Industrial Network � Setting up a Yokogawa based Network� Practical Exercises

� Fault Finding Techniques in Industrial processes – 1 day workshop� Introduction to fault finding� Fault finding tools� Transducer terminology - explained� Root cause analysis and Post-mortems� Useful information

� Process Control (PID) technology – 1 day workshop� Basic Control concepts� Introduction to PID control� Ratio control� Cascade control� Feed forward control� Digital PID Controllers

� Gas Chromatograph GC8000 – 2 day workshop1st day Gas Chromatograph Principles� What is a Gas Chromatograph?� Introduction and fundamentals of GC8000� Explanation of hardware for GC8000� Protection system, Electronic system, and Pressure / Flow� Oven, Columns, Valves and Injection system� Detectors� Local LCD display Operation� Calibration / Validation procedure� Introduction of GCMT/ ASET software� KGC Document (Operation Data)

Yokogawa South Africa (Pty) Limited 764 Golf Club Terrace, Constantia Kloof, RoodepoortEmail: nico.marneweck@za.yokogawa.comPhone: (+27) 011-831 6300 Fax: (+27) 011-831 6350

2nd day Gas Chromatograph Operation� Start up and Shutdown procedures� Sample Loop Systems� Maintenance practices� Trouble-shooting techniques� Demonstration of PGC� Local LCD Operation / Calibration Procedure (Practical)

Gas (Dry) analysis – Zirconia O2 Analyser - 2 day workshop1st day Explain O2 Gas Analyser� Oxygen element� Principle of operation� Yokogawa Product Line� Yokogawa Suffix Codes� Calibration� Installation� Service� Practical Demonstration

2nd day Advanced Maintenance� Theoretical Assessment� Practical Assessment

� Final Control Element (Valves) – 1 day workshop� Introduction to control valves � Common valve types and their configurations � Valve sizing, applications and considerations � Valve calibration methods

Yokogawa and its International partners can facilitate the above Field Instrumentation Customised Product Training topics according the needs of our Loyal Customers. Customers can select from the course list to compile 5x days training

Day Workshop Title Maximum Number of Delegates

Monday Communication Protocols in Industrial Automation 1x day 4Introduction to Industrial Network System 2x days 4

Tuesday • Network Fundamentals 4Wednesday • Yokogawa Industrial Networks 4Thursday Fault Finding techniques in Industrial processes 1x day 4Friday Process Control (PID) technology 1x day 4Additional days Gas Chromatograph GC8000 2x days 4Additional days Zirconia O2 Analyser 2x days 4Additional day Final Control Element (Valves) 1x day 4