Diesel Compression tester Test Tools

TT-070C Diesel Compression TesterSupplied with one gauge and all necessary adapters.Gauge includes release valve and 368mm(14.5")of hous,dial reads from 0-1000 PSI and 0-70 BAR.Unique swivel end quick couplerallows the operator to connect the adapters quickly and easily.Included Ford/Navistar,GeneralMotors, Navistar, Audi,Cummins,Mercedes Benz, Volkswagen, Volvo, Cummins,Bacharach,Detrolt Diesel.

TT-070B Diesel Compression TesterSupplied with one gauge and all necessary adapters.Gauge includes release valve and 368mm(14.5")of hous,dial reads from 0-1000 PSI and 0-70 BAR. Unique swivel end quick couplerallows the operator to connect the adapters quickly and easily.Included Audi,Cummins,MercedesBenz, Volkswagen, Volvo, Cummins.

TT-070 Diesel Compression Tester2-1/2" dial, glycering filled gauge with glass lens in stainless steel housing. 4,500 PSI rated nylon jacketed pressure hose assembly. Dual scale -0-1,000 PSI; Metric Scale -0-70 BAR. 13 Piece adapter set Included Ford/Navistar,General Motors,Audi,Cummins,MercedsBenz, Volkswagen, Volvo,Bacharach,Allis Chalmers,Bedford,Case,J.I.,Deere, John,Fiat Allis,FordTractor,Interational Harvester, Mack Turk,Onan, Waukesha,BMW,Lincoln conntinetal,Mark Ⅶ,Peugeot, Chevy Luv, Isuzu,Toyota,General Motors,Detrolt Diesel,

TT-070A Diesel Compression Tester Adapter* Use to test all mack truck engines listed on application chart on reverse side2-1/2" dial, glycering filled gauge with glass lens in stainless steel housing. 4,500 PSI rated nylon jacketed pressure hose assembly. Dual scale -0-1,000 PSI; Metric Scale -0-70 BAR. 13 Pieceadapter set (Deere & BMW adapters included) Mack Truck,J.I. CASE,Onan,Waukesha,Aillis Chalmers,Bedfore,FiatAllis,Harvester.

TT-005 Diesel Compression Tester kitEasy-to-use compression tester is designed specifically for medium-duty engines; equipped withglow plugs. Dual reading gauge measures compression to 1000 PSI and 7000 kPa. Gauge has apush-button release valve and quick disconnect fittings on the hose end. Tester comes with all thenecessary glow plug and nozzle adapters in a handy storage case. Tester service these engines: *Cummins B and C; * Navistar DT466/DT360 * Ford / Navistar 6.9 & 7.3L; * GM 6.2L and 6.5L; *Hino diesel and Mitsubishi Fuso truck engines

TT-030 HD Global Diesel Compression Test SetContains compression tester and an assortment of adapters to test a wide variety of vehicles, trucks,heavy-duty equipment deluxe gauge with rubber boot. Tester service these engines:Audi,Mercedes,VW,Volvo,Cummins,Allis Chalmers, Bedford, J.I.Case, J.I.Case 70 Series,JohnDeere Pencil Type,John Deere,Flat Allis, Ford Tractor, International, Harvester, MackTruck,Massey Ferguson, Mitsubishi-Fuso, Onan, Scania,Waukesha,Wisconsin,White Farm, Kubota,Mitsubishi, Nissan, Toyota, UD-Nissan Truck,Detroit Diesel,Lincoln,Mark Ⅶ, Continental, Dodge,Case/Cummins "C"Series, Dodge,Navistar,

TT-025A Diesel Compression Test Set* A basic set for Diesel work in the American market.; * Tester has a handy deflator for releasingair & retesting. ; * A 16-1/2" wire reinforced hydraulic hose has a quick coupler on a swivel forease of connection. * A 2-1/2" gauge with easy to read red and black dial & snap-in lens. Recordspressures from 0-1000 PSI and 0-70 bar. * Adapters for All GM, Isuzu , Lincoln Mark Vll andContinental, Ford/ Navistar, Audi, Mercedes, Peugeot, Toyota, VW, Volvo- Bacharach conversionadapter also included. * Comes in a red metal box with insert; instructions and specificationsincluded.

TT-025 Diesel Compression test set* basic set for Diesel work in the American market. Tester has a handy deflator for releasing air &retesting.; * 16-1/2" wire reinforced hydraulic hose has a quick coupler on a swivel for ease ofconnection. * 2-1/2" gauge with easy to read red and black dial & snap-in lens. Records pressuresfrom 0-1000 PSI and 0-70 bar.

TT-005A Diesel Engine Compression GaugeWorks on any diesel engine to test compression up to 1000 PSI and 70 kg/cm2. Features include acheck valve,push but compression release,and a quick disconnect fitting on the hose end.Straightand 45。Hose connectors are included.

Diesel Engine Tester Test Tools Diesel compression service

TT-145A Diesel Engine Compression Tool master kitthis kit but with the addition of it Clamp-on Injector Adaptor Set. Large, 2-1/2",70bar(1000psi) gauge with rubber bumper,Glow plug Adaptor: Wide range of Alfa , BMW , Chrysler , Daewoo , Fait , Ford ,Hyuidai , Izusu , LandRover , LDV , Mazda , Mercedes , Mitsubishi , Nissan , Opel ,PSA , Renault , Saab , Suzuki , Toyota , VAG , Vauxhall , Volvo diesel engines;Injector: M20 , M22 , M24 ＆ Ford Stanadyne injector plus clamp-on injector

TT-110 Diesel Engine Compression Tester Set* comprehensive tester kit for both direct and indirect diesel injected cars. * for use on direct orindirect injection engines. * checks engine compression under cranking conditions. small profile,quick coupling adapters for speed & security. * built-in pressure relief valve enables repeat tests.* flexible hose(355mm) give access to restricted plug/injector ports.* dual scale 80MM DIA gauge 0-1000 LB/IN2 & 0-70 BAR.

TT-110A Diesel Engine Compression Tester Set* comprehensive test kit for both direct and indirect diesel injected cars. * simple & easy to use.*for use on both direct or indirect injection engines. * checks engine compression undercrankin11g conditions. * small profile, quick coupling adapters for speed & security. * built-inpressure relief valve enables repeat tests without dismantling. * flexible hose(355MM) givesaccess to restricted plug & injector ports. * dual scale 80MM DIA gauge 0-1000 LB/IN2 & 0-70BAR.

TT-115 Diesel Engine Compression Tester set (C.V.S)* comprehensive kit for checking compression on both direct and indirect dieselinjected commercial, marine and industrial engines. * for commercials, marine &industrial engines.* checks engine compression when cranking. * for use on direct orindirect fuel injection engines. * built-in pressure release enables complete tests withoutdismantling. * small profile, quick release coupling system. * dual scale 80MMDIAgauge 0-1000 LB/IN2 &0-70 BAR. flexible hose(355mm)to give access in restrictedspaces.

TT-145 Diesel Engine Cylinder Leakage Test kitsThree diesel engine cylinder leakage test kits that cover the wide range of modernengines ,including HDi, TDCi and Pumpe Duse . This kit covers mosy popular cars andvans, it has additional glow plug adaptors for increased coverage and with furtherincludes an adaptor set for clamp-type injectors to give even winder coverage ofcar,van,truck and bus, agricultural and marine applications. Glow plug Adaptor: Widerange of Alfa , BMW , Chrysler , Daewoo , Fait , Ford , Hyuidai , Izusu , LandRover ,LDV , Mazda , Mercedes , Mitsubishi , Nissan , Opel , PSA , Renault , Saab , Suzuki ,Toyota , VAG , Vauxhall , Volvo diesel engines; Injector: M20 , M22 , M24 ＆ FordStanadyne injector plus clamp-on injector

TT-110D Diesel Compression Tester Set (CARS/C.V.S)*comprehensive test kit for both direct and indirect diesel injected cars. *for commercials,marine & industrial engines. *checks engine compression when cranking. *small profile, quickrelease coupling system. *built-in pressure release enables complete tests without dismantling.*flexible hose(355MM) gives access to restricted plug & injector ports. *dual scale 80MM DIAgauge 0-1000 PSI & 0-70 kg/cm2. *simple & easy to use.

TT-115A Diesel Engine Compression Tester set (C.V.S)*comprehensive kit for checking compression on both direct and indirect diesel injectedcommercial, marine and industrial engines. *for commercials, marine & industrialengines. *checks engine compression when cranking. * for use on direct or indirectfuel injection engines. * built-in pressure release enables complete tests withoutdismantling. *small profile, quick release coupling system.

Compression Tester Test Tools

TT-190 Diesel Engine Compression Tool Kit*Set included dual scale 80MM DIA gauge 0-1000 PSI & 0-70 kg/cm2 with rubberbumper,straight and right angled quick connect fittings and an extensive range of glow plug andinjector adaptors; Glow plug Adaptor: Wide range of Alfa , BMW , Chrysler ,Fait , Ford , Hyundai , Isuzu , LandRover , Mazda , Mercedes , Mitsubishi ,Nissan , Opel , Renault , Suzuki , Toyota , Volvo diesel engines.

TT-145G Diesel Engine Compression Tool KitGlow plug Adaptor: Wide range of Hyuidai , LDV , Mazda , Mitsubishi , Nissan, Suzuki , Toyota diesel engines

TT-145D Diesel Engine Compression Tool kitGlow plug Adaptor: Wide range of Alfa , BMW , Chrysler , Daewoo , Ford ,LandRover , Mercedes , Mitsubishi , Nissan , PSA , Renault , Saab , VAG ,Vauxhall , Volvo diesel engines

TT-145B Diesel Engine Leakage Adaptor test SetClamp-on injector adaptors covering car, van,truck and bus,agricultural andmarine injector sizes.

TT-145C Diesel Engine Compression Tool KitGlow plug Adaptor: Wide range of Alfa , BMW , Chrysler , Daewoo , Ford ,LandRover , Mercedes , Mitsubishi , Nissan , PSA , Renault , Saab , VAG ,Vauxhall , Volvo diesel engines; Injector: M20 , M22 , M24 ＆ Ford Stanadyneinjector plus clamp-on injector

TT-035 Universal Compression Tester KitThis versatile kit provides a quick method to obtain cylinder compression pressure onengines with deep, recessed spark plugs and difficult access. A special air-hold valve isincluded for easy resetting of the gauge, which is graduated from 10 to 300 psi (0 to 21kg/cm2). Gauge assembly includes pressure relief valve.

TT-145I Petrol & Diesel Engine Compression Tool Kit‧Set included clamp-on Injector Adaptor Set. Large, 2-1/2" , 0-50 BAR(700psi) gaugewith rubber bumper,straight and right angled quick connect fittings and an extensiverange of glow plug and injector adaptors enable this kit to cover the vast majority ofcar,van,truck and bus, agricultural and marine diesel engines.Supplied in plastic casewith pre formed liner and foam filled lid. ‧Glow plug Adaptor: Wide range of Alfa ,BMW , Chrysler , Daewoo , Fiat , Ford , Hyuidai , Isuzu , LandRover , LDV , Mazda, Mercedes , Mitsubishi , Nissan , Opel , PSA , Renault , Saab , Suzuki , Toyota , VAG, Vauxhall , Volvo diesel engines; Spark plug size : 10 , 12 , 14 , 18mm, ‧Injector:M20 , M22 , M24 ＆ Ford Stanadyne injector plus clamp-on injector

TT-145F Diesel Engine Compression Tool KitGlow plug Adaptor: Wide range of Isuzu , Mercedes , Renault , Vauxhall dieselengines

TT-145E Diesel Engine Compression Tool kitGlow plug Adaptor: Wide range of Alfa , Fait , Ford , PSA diesel engines

Test Tools Compression Tester

TT-080B Unique Compression Tester*Easy-reading 2-1/2" diameter gauge features colour-coated quadruple calibrations 0-300 psi,21kg/cm,21bar&2100 kpa. *13" durable rubber hose with 14mm/18mmadapter. *6" heavy-duty stem with universal rubber cone adapter fits all plug holes.

TT-080C Compression Tester*Start and run engine up to normal operating temperature. *Mark sure the battery is fullycharged. *Removed dust from spark plug wells.Remove all spark plugs. *Ground hi-tensionterminal of the ignition coil avoid spark during test. *Fit 12 mm spark plug threads

TT-035B Universal Compression Tester KitThis versatile kit provides a quick method to obtain cylinder compression pressure onengines with deep, recessed spark plugs and difficult access. A special air-hold valve isincluded for easy resetting of the gauge, which is graduated from 10 to 300 psi (0 to 21kg/cm2). Gauge assembly includes pressure relief valve.

Compression TesterChecks cylinder compression from 0 to 300 PSI (0 to 21 kg/cm2). Equipped with air-hold valve and gauge reset button. 12"flexible rubber hoseTT-045 Fit 14 & 18mm spark plug holesTT-045A Fit 18 mm spark plug threadsTT-045B Fit 10, 12 & 14mm spark plug threadsTT-045C Fit 10 mm spark plug threadsTT-045D Fit 14 mm spark plug threadsTT-045E Fit 12 mm spark plug threadsTT-045F Fit 14 mm spark plug threadsTT-045G Fit 14 & 18mm spark plug threadsTT-045H Fit 12 mm spark plug threads

TT-075 Compression Test KitCompression test on vehicles with gasoline engines. Long flex hose and adapters eliminate theneed to remove secondary equipment such as power brakes, steering, air conditioning, andmanifold components. Side release valve for quick re-testing of cylinder. Set includes gauge and14mm/18mm solid short adapter, 14mm/18mm long flexible adapter, 14mm long reach adapter,and instruction manual. * Large 2-1/2" gauge with dual inch/metric readings: 0 to 300PSI and 0 to 21 kg/cm2. * Boot on gauge provides extra protection from roughhandling. * Small 1-1/2" gauge w/dual inch/metric readings 0-200 PSI and 0 to 14kg/cm2. Application: American motors, Chrysler, Ford, GM, Mitsubishi, Nissan,Peugeot porsche, Subaru, Suzuki.Toyota, Jeep, Saturn, Saura, Audi, BMW, Daihatsu,Hoda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Land rover, Lexus, Mazda, Mercedes.

TT-075A Digital Compression Test KitCompression test on vehicles with gasoline engines. Long flex hose and adapters eliminate theneed to remove secondary equipment such as power brakes, steering, air conditioning, andmanifold components. Side release valve for quick re-testing of cylinder. Set includes digitalgauge and 14mm/18mm solid short adapter, 14mm / 18mm long flexible adapter, 14mm longreach adapter, and instruction manual.

TT-160 Compression TesterFeatures a quick disconnect with a pressure release valve and a 300 psi. gauge.Designed to check cylinder compression . Contains hoses for 10 , 12 & 14 mmspark plug applications.

TT-150 Petrol Engine Compression Tester Deluxe KitLarge 2-1/2" gauge fitted with protective cover and 445mm hose . Scale reads from 0-350 psi ( 0-25 bar ) and conforms to BS 1780-1985 . Suitable for petrol engines with 10, 12 , 14 or 18mm spark plugs and includes a long reach adaptor for 16v and v6 engines. Also includes 445mm hose and quick release connector for air input .

Compression Tester Test Tools Injection Tester

TT-050B Fuel Injection Test Kit*All fittings have quick connect Schrader valves for safety and ease of hookup tothe gauge assembly. *Checked for Audi , Mercedes Benz , Volkswagen , andother European automotive engines.

TT-080 Gas Cylinder Compression Tester*Air gauge with quick coupling & release valve. *High - tension connecting pipe with safetylock coupling. *Crank shaft type test pipe with rubber plug.*Transverse axis test pipe with rubber plug. *M10-1.0 Adapter;*M12*1.25 Adapter ; *M14*1.25 Adapter; *M18*1.5 Adapter

TT-080A Compression TesterEasy -reading 2-1/2" diameter gauge features color-coded quadruple calibrations 0-300psi,21kg/cm,21bar&2100 kpa.; 13" durable rubber hose with 14mm/18mm adapter.6" heavy-duty stem with universal rubber cone adapter fits all plug holes. Convenientpressure -holding side release valve. Provides an accurate reading on high performanceengines.

TT-105 Petrol Engine Compression Tester Set*comprehensive kit based on petrol compression tester for vehicles with M10,M12,M14 and M18spark plug threads. complete with extensions, thread chasers and service kit.; *checks conditionof valves, piston rings, gaskets & cylinder heads.; * used on cars, vans & motorycles. ; *pressurerelief valve enables repeated testing of a cylinder without removing the gauge.

TT-050 Fuel Injection Test kit*The fuel injection test kit tests fuel injection systems on vehicles on most makesand models. *Pinpoints problems in filters,lines,and regulators. *This kit comescomplete with assorted hoses,hose barb fittings,and hose clamps to adapt toearlier vehicle models,as well as current. Checked models:Accura HondaHyundai, Mazda, Suzuki, Toyota, Audi, BMW, Mercedes, Puegot, Porshe, saabvw, Volvo W/CIS,CISE or K.jetroni.

TT-050A Fuel Injection Test Kit*All fittings have quick connect Schrader valves for safety and ease of hookup tothe gauge assembly. * Checked for Hyundai , Honda , Mitsubishi , and otherAsian automotive engines

TT-080F Digital Compression Tester*Digital manometer with quick coupling , 0-300 PSI , display in PSI / BAR / KPA ,supplied with adapters suitable for spark plug threads :*M10*1.0 Adapter; *M12*1.25 Adapter*M14*1.25 Adapter; *M18*1.5 Adapter*Rubber-sealed pressure piece for manual use , bent .*Rubber-sealed pressure piece for manual use , straight .

TT-040 Master Cummins Diesel Fuel Injection Test KitIncludes the fitting gauge needed to check fuel pressure, fuel volume,and fuel restrictions. Contains: * Special quick-disconnect banjo fitting (M14 x 1.5male). * Two fuel injection quick-coupler adapters. * Gauge assembly. * Quickdisconnect banjo fitting (M12 x 1.5 male). * Fuel volume test adapter. * Diesel fuelinlet restriction test adapter. Applied: 1988-98 Dodge pickups and vans with 5.9L 12-valve, and 1998 1/2-newer 5.9L 24-valve Cummins Diesel engines.

Test Tools Fuel Injection Tester

CS-1021 Fuel Injection Test Kit3-1/2” gauge with dual readings of 0-120 psi .All adapters, gauges, and hose assemblies feature a quick coupling system forspeedy and efficient testing connection. The uniquely designed relief valverelieves the pressure and the fuel safely.

TT-065 Multi-Port Fuel Injection Pressure Test kit* Gauge and blow down hose assembly; * Adapter hose for schrader test ports with7/16-20 threads; * Adapter hose for schrader test ports with .308-32 threads;* Single end hose connector 1/4" , 5/16": and 3/8"* Double end hose connector 5/16" and 3/8"; * 6mm fuel bolt adapter

TT-065A Multi-Port Fuel Injection Pressure TesterContents of kit: * Gauge and blow down hose assembly; * Adapter hose for schradertest ports with 7/16-20 threads; * Adapter hose for schrader test ports with .308-32threads; * Single end hose connector 1/4" , 5/16: and 3/8"* Double end hose connector 5/16" and 3/8"; * 6mm fuel bolt adapter

TT-050C Fuel Injection Test Kit*All fittings have quick connect Schrader valves for safety and ease of hookupto the gauge assembly. *Checked for Hyundai , Honda , Mitsubishi , Audi ,Mercedes Benz , Volkswagen and other Asian and European automotiveengines .

TT-055C Fuel Injection Pressure Test( Added Ting Valves Per Each Adapters ) * A large 3-1/2" gauge with dual readingsof 0-145 psi and 0-1000 kpa. also a low pressure 2-1/2" gauge for accurate readingbelow 15 psi. The adapter set tests fuel injection systems on vehicles on most makesand models:Accura Honda Hyundai Mazda, Suzuki, Toyota, Audi, BMW, Mercedes,Puegot, Porshe, Saab vw, Volvo w/cis, CISE or K.jetroni.

TT-055 Fuel Injection Pressure Test* A large 3-1/2" gauge with dual readings of 0-145 psi and 0-1000 kpa.Also a low pressure 2-1/2" gauge for an accurate reading below 15 psi.The adapter set tests fuel injection systems on vehicles on most makes andmodels:Accura Honda Hyundai Mazda, Suzuki, Toyota, Audi, BMW,Mercedes, Puegot, Porshe, Saab vw, Volvo w/cis, CISE or K.jetroni.

TT-055A Fuel Injection Pressure Tester Kit * The set designed for most Japenese car. * Pick up the joints and adapters from # TIT-055 * Model No.:A,D,HE,HN,HO,HP,HQ,HR,HA,HE,F, * Repair Kit,Instruction Manual. * All the specification is the same as # TT-055

TT-055B Fuel Injection Pressure Tester Kit* The set designed for most European car.* Pick up the joints and adapters from # TIT-055* Model No.:A,D,G,F,AM × 2,AE,AI,AT,AA,AB, AL,AG,AK,AC,E,RepairKit,Instruction Manual. * All the specification is the same as # TT-055

Fuel Injection Tester Test Tools

TT-200 Gasoline Injection Pressure Test setPressure testing diagnosis on a wide range of Single Point, Multi-point ,Mechanicaland Electronic Injection System. A modular range comprising 3 × Test Kits and 2 ×Workshop Combination Sets each designed to cover fuel injection system groups. Eachkit progressively builds up the application coverage start with Gauge/Hose and adptorsfor TestPort entry, increase to encompass Single Point (TBi) and Electronic systems(EFi), and finally, add Mechanical Fuel Injection (CIS) applications.

TT-200A Gasoline Injection Pressure Test setPressure testing diagnosis on a wide range of Single Point, Multi-point ,Mechanicaland Electronic Injection System.A range each designed to cover fuel injection system groups. Each kit progressivelybuilds up the application coverage start with Gauge/Hose and adaptors for test portentry, increase to encompass Single Point and Electronic systems , and finally, addMechanical Fuel Injection applications.

TT-100 GM Throttle-Body Injection Fitting kitThis kit has everything you need to quickly and easily check the fuel pressure inGM throttle-body injection systems.It's designed for 1982 and newer low-pressure TBI system.

TT-095C Asian Fuel Injection Fitting Kit*Diagnoses fuel related problems such as hesitation,stumble,stall,and lack of power onnearly every Asian import system by simply checking fuel pressure and volume. Withjust a few quick connections you'll know if the problem is caused by low fuelpressure,a defective fuel pressure regulator,low fuel volume to the injectors plus muchmore. *Each fitting comes with a quick-connect Schrader valve for safety and easyhookup to the gauge assembly. *Fitting seals are compatible with most most popularcleaning solvents.

TT-095B European Fuel Injection Fitting KitThe fittings in this kit enable you to connect OTC No. 7211 gauge (not included) tomost Audi,Mercedes Benz, Volkswagen, and other European automotive engines, anddiagnose most common fuel system problems involving low fuel pressure and low fuelvolume at the injectors.It even works on CIS and CISE systems. Each fitting comeswith a quick-connect Schrader valve for safe, easy hookup to the gauge assembly.*Fitting seals are compatible with most popular cleaning solvents.

TT-095A Fuel Injection Canister Cleaner, 2 GaugesCleans fuel injectors restoring the original spray pattern and giving improved performance, fueleconomy, and emission tests. Cleans carbon from intake valves, fuel passages, and cylinderswith a professional carbon cleaning solution.Two gauges allow for checking the vehicle fuel pressure with the bottom gauge then setting thecleaning pressure with the top gauge by referring to vehicle fuel pressure on the bottom gauge.Uses shop air with any professional canister cleaning solution on the market. Ample capacity:holds 20 oz.

TT-095 Cleaning the Fuel InjectorsRead, understand, and follow "Safety Precautions" before using Fuel Injector Cleaner.Run thevehicle until the engine reaches normal operating temperature. Shut the engine OFF. Turnregulator on top of Fuel Injector Cleaner to full OPEN position (counterclockwise).Leave thefitting on the end of the regulator open-do NOT connect shop air. Close the shut-off valve at thebottom of the Fuel Injector Cleaner. Note: Valve Is OFF if it's turned all thewayclockwise.Remove top and regulator assembly from top of F309Fuel Injector Cleaner. Fillthe container with one bottle of D-Karbonizer. Install top and regulator assembly again.Connect the canister hose to a decarbonizing adapter .

Injection Pressure Tester Test Tools Flow Meter Common Rail

TT-135B 24 pcs set for Flow Meter Common RailDirect measurement of return flow of the injector;. Measurement of return flow usingexternal flow meter. * Possibility of simultaneous measurement of up to 6 injectors, * Boxfor transportation and storage is included; * Set included 24pc injector adaptors : apply forBOSH-01 , SIEMENS-02 , DENSO-03 and DELPHI injector

TT-135 Flow Meter Common Rail setThe purpose of this instrument is to measure rapidly and effectively the amount of fuel thatevery injector returns to the deposit tank, so that you will know if any injector is damaged.Features: Direct measurement of return flow of the injector. * Measurement of return flowusing external flow meter; . Possibility of simultaneous measurement of up to 6 injectors. Box for transportation and storage is included

TT-200B Gasoline Injection Pressure Test setPressure testing diagnosis on a wide range of Single Point, Multi-point ,Mechanical andElectronic Injection System. A range each designed to cover fuel injection system groups.Each kit progressively builds up the application coverage start with Gauge/Hose andadaptors for test port entry, increase to encompass Single Point and Electronic systems ,and finally, add Mechanical Fuel Injection applications.

TT-135C Flow Meter Common Rail Adaptor setThe purpose of this instrument is to measure rapidly and effectively the amount of fuel thatevery injector returns to the deposit tank, so that you will know if any injector is damaged.Features: . Direct measurement of return flow of the injector . Measurement of return flowusing external flow meter . Possibility of simultaneous measurement of up to 8 injectors .Box for transportation and storage is included . Set included 32pc injector adaptors applyfor BOSH . SIEMENS . DENSO and DELPHI injector

TT-135A Flow Meter Common Rail Adaptor setThe purpose of this instrument is to measure rapidly and effectively the amount of fuel thatevery injector returns to the deposit tank, so that you will know if any injector is damaged.Features: . Direct measurement of return flow of the injector. Measurement of return flow using external flow meter; . Possibility of simultaneousmeasurement of up to 6 injectors; Box for transportation and storage is included; Setincluded 24pc injector adaptors : apply for BOSH . SIEMENS . DENSO and DELPHIinjector

TT-165 4-Stroke Engine Leak Down TesterGauge will register the total percentage of leakage past the rings , head gasket , intake andexhaust valves . With an air source of 70 to 160 psi. , this system will pressurize thecylinder with 60 psi. of air . Designed to check the amount of cylinder leakage in a 4-strokeengine . Speeds up troubleshooting & helps to isolate bad components . 10 , 12 & 14mmspark plug thread hoses , regulator and gauge included .

TT-170 Engine Leakaging Tester Kit* Differences between the individual cylinder up to two graduation lines (= 4% pressureloss) are acceptable. * The pressure which have run less than 5000 kilometers may behigher, because the cylinder, the piston and the piston rings have not yet reached their fullsmoothness. * Risk of burning on warmed-up engines - never touch hot parts. * Necessarytesting pressure: 6 to 12 bar.

TT-200C Gasoline Injection Pressure Test setA range each designed to cover fuel injection system groups. Each kit progressively buildsup the application coverage start with Gauge/Hose and adaptors for test port entry, increaseto encompass Single Point and Electronic systems , and finally, add Mechanical FuelInjection applications.

Flow meter common rail Test Tools

TT-175D Flow Meter Common Rail Adaptor set (quick-release)The purpose of this instrument is to measure rapidly and effectively the amount of fuelthat every injector returns to the deposit tank, so that you will know if any injector isdamaged. Features: . Direct measurement of return flow of the injector. Measurement of return flow using external flow meter; . Possibility of simultaneousmeasurement of up to 8 injectors;Set included 32pc injector adaptors : apply for BOSH . SIEMENS . DENSO andDELPHI injector

TT-175G 48 pcs/set Flow Meter Common Rail (quick-release). Direct measurement of return flow of the injector; . Measurement of return flowusing external flow meter; . Possibility of simultaneous measurement of up to 6injectors; . Box for transportation and storage is included; . Set included 36pc injectoradaptor: apply for BOSH-01 , SIEMENS-02 , DENSO-03 and DELPHI injector

TT-175B 24 pcs/set Flow Meter Common Rail (quick-release). Direct measurement of return flow of the injector; . Measurement of return flowusing external flow meter; . Possibility of simultaneous measurement of up to 6injectors; . Box for transportation and storage is included; . Set included 24pc injectoradaptor: apply for BOSH-01 , SIEMENS-02 , DENSO-03 and DELPHI injector

TT-175C 36 pcs/set Flow Meter Common Rail (quick-release). Direct measurement of return flow of the injector; . Measurement of return flowusing external flow meter; . Possibility of simultaneous measurement of up to 6injectors; . Set included 36pc injector adaptor: apply for BOSH-01 , SIEMENS-02 ,DENSO-03 and DELPHI injector

TT-135E 32 pcs set for Flow Meter Common RailDirect measurement of return flow of the injector;. Measurement of return flow using externalflow meter. * Possibility of simultaneous measurement of up to 6 injectors, * Box fortransportation and storage is included; * Set included 24pc injector adaptors : apply for BOSH-01 , SIEMENS-02 , DENSO-03 and DELPHI injector

TT-135D Flow Meter Common Rail SetThe purpose of this instrument is to measure rapidly and effectively the amount of fuelthat every injector returns to the deposit tank, so that you will know if any injector isdamaged. Features: . Direct measurement of return flow of the injector. Measurement of return flow using external flow meter; . Possibility of simultaneousmeasurement up to 8 injectors;

TT-175A Flow Meter Common Rail set (quick-release). Direct measurement of return flow of the injector. Measurement of return flow using external flow meter. Possibility of simultaneous measurement of up to 6 injectors

TT-175 Flow Meter Common Rail Adaptor set (quick-release). Direct measurement of return flow of the injector. Measurement of return flow using external flow meter. Possibility of simultaneous measurement of up to 6 injectors. Set included 24pc injector adaptors : apply for BOSH . SIEMENS . DENSO andDELPHI injector.

Common rail return fuel tester Test Tools Oil Pressure Tester

TT-130 Transmission Pressure Gauge Set*For all major manufacturer domestic and import vehicles. *Set contains two gaugeassemblies for high and low pressure ranges. *Nine adaptors to test a wide variety ofdomestic and import automatic transmissions. Four special fittings are also included forconnection to hard-to-reach test ports in areas requiring a 45。or 90。angle.

TT-010 Oil Pressure Gauge SetUse on diesel and gasoline engines . Includes standard and metric adaptors for mostpopuiar domestic and import cars, trucks, tractors and stationary engines Features bright,easy- to-read gauge with green protective boot. Included : 0-100 PSI (0-700 kPa)-GaugeAssembly. Adaptor: (1/8-27 to 1/4-18); (1/8-27 to 3/8-18); (1/8-27 to 1/-28 BSPT); (1/8-27 to 10-1.0); (1/8-27 to 1/-28 BSPT); (1/8-27 to 10-1.0) Street Elbow; 2" Large Nipple;Coupling.

TT-015 Engine Oil Pressure TesterDesigned to check engine oil pressure in both cars and trucks. Easy to read dual scalegauge. Complete with 24"(600mm) of oil proof hose with 1/8" NPT. * Also includes 1/4"NPT and 3/8" NPT adaptors. * Dual gauge readings; 0 to 300psi (0 to 21 bar)* Gauge diameter: 2.5"

TT-020 Oil Pressure Check kitFor testing engine oil pressure at the oil filter on most passenger cars and light trucks.Adapters are included for both domestic and imported engines. Gauge range 0-100PSI.

TT-120 Oil Pressure Tester Set* helps to diagnose worn oil pumps and engines, faulty oil pressure switches and warningindicators.. * large clear dual scaled gauge. * accurately test oil pump pressure, switch& warning indicators. * quick coupling adapters, with shut-off valve, for speed &security. * permanently oil primed, long, flexible hose.

TT-195 Common rail return fuel tester‧Comprehensive test kit for both direct and indirect diesel injected cars. ‧Checksengine compression under cranking conditions.‧Built-in pressure relief valve enablesrepeat tests without dismantling. ‧Flexible hose(355MM) gives access to restricted plug& injector ports.‧Set included dual scale 80MM DIA gauge 0-1000 PSI & 0-70 kg/cm2with rubber bumper,straight and right angled quick connect fittings and an extensiverange of glow plug and injector adaptors. ‧Glow plug Adaptor: Wide range of Alfa , BMW ,Chrysler , Fait , Ford , Hyundai , Isuzu , LandRover , Mazda , Mercedes , Mitsubishi , Nissan ,Opel , Renault , Suzuki , Toyota , Volvo diesel engines.

TT-180 Common Rail Injector, Return Flow Pressure Measurement TesterFor testing the return flow pressure from common rail injectors of Bosch,VDO/Siemens & Delphi engine system. Suitable for testing the condition of a piezopass or fail statement.

TT-090 Cylinder Leak Detector & Crank Stopper kit (2 gauge)*Kit allows easy identification of compression problems*Detector measures exact leakage amount and locates leaks area*Crank stopper locks engine in place to facilitate installation of timing belts,removal ofharmonic balance pulleys and replacing spark plugs.

TT-090A Cylinder Leak Detector & Crank Stopper kit*Kit allows easy identification of compression problems*Detector measures exact leakage amount and locates leaks area*Crank stopper locks engine in place to facilitate installation of timing belts,removal ofharmonic balance pulleys and replacing spark plugs.

Carburetor Synchronizer Test Tools Brake Pressure tester

TT-060C Brake & Clutch Master Cylinder Pressure tester kit*Adapters install directly into master cylinder line access holes.*Measures pressure at front or back of master cylinder.*Comes with complete line of adapters,gauge assembly,a complete instruction manualand vehicle look-up table. *Analog pressure gauge 0-3000 PSI and is accurate to 4%of scale. *JIC quick disconnect for easy connection.*Complete adapter line with annual updates offered as needed.

TT-060B Brake & Clutch Cylinder Pressure Tester Kit* Adapters install directly into master cylinder line access holes.; * Measures pressureat front or back of master cylinder.; * Comes with complete line of adapters, gaugeassembly,a complete instruction manual and vehicle look-up table. *Analog pressuregauge 0-3000 PSI and is accurate to 4% of scale. * JIC quick disconnect for easyconnection.

TT-060 Deluxe Brake Pressure Test KitFeatures two 3,000-psi gauge assemblies. Dual scale dial - standard scale 0-3,000 psiand metric scale 0-200 kg/c㎡. 4,500 psi rated pressure hose assembly. Include 22-piece adapter set. Includes high impact blow-molded carrying case & reference chart.

TT-060A ABS & Brake Pressure Test Kit*Adapters install into wheel cylinder or back caliper line access holes.*Measures pressure at front or back of master cylinder or ABS port.*Comes with a complete line of adapters,gauge assembly,a complete instructionmanual and vehicle look-up table. *Analog pressure gauge 0-3000 PSI and is accurateto 4% of scale. *JIC quick disconnect for easy connection.*Complete adapter line with annual updates offered as needed.

TT-085D Carburetor Synchronizer(Vacuum)Specifications: Carburetor Synchronize For testing fuel pump carburetor andtransmission check auto with 2~4pcs carburetors; * 4pcs 3-1/2" synchronizer gaugeswith fixed plate; *Pressure Range:0~76cmHg; *rubber hose 4pc 8×5×750mm;*extension tube 4pc 3.9×52mm 4pc 3.9×122mm; *cone type connector 8 pc 8×40mm; * 4pc 10×53mm(M6×0.75); * 4pc 10×60mm(M6×1.0)

TT-085F Carburettor Synchronizer(Vacuum)Specifications: For testing fuel pump carburetor and transmission check auto with2~4pcs carburetors; *rubber hose 4pc 8×5×950mm* 4pcs 2" synchronizer gauges with fixed plate;*Pressure Range: 0~76cmHg*Connector 4pc M5×0.8×169mm; connector 4pc M5×0.75×53mm*Connector 4pc M5×0.8×100mm; connector 1pc 6×55mm*Cconnector 4pc M6×0.75×53mm; connector 4pc M6×1.0×60mm

TT-125 Power Steering Tester Kit* For accurate,reliable power steering analysis. * Determines if trouble is infront suspension or steering linkage. * Saves valuable time when rebuilding orreplacing parts not actually defective.; * Set contains 2,000 PSI gauge withmetering valve. connection hose, 13 adapters and power steering pressurespecifications. American Motors,Chrvsier Corp,Ford Motor.

TT-085C Basic Exhaust Back Pressure Set*Enables technician to test exhaust back pressure through oxygen sensor. *Oxygensensor adapter includes M12 and M18 thread. *The special 2-1/4 in.gauge has twomulti-colored bands-idle 2500RPM,with pressure shown in PSI and bar. *Hose is 6ft.,enough length for the techinician to test from the driver's seat.

Test Tools Injector pressure tester

TT-085 Carburetor Synchronize test kit* For testing fuel pump carburetor and transmission check auto with 2~4 pcscarburetors * 4 pcs 3-1/2" synchronizer gauges with fixed plate* Rubber hose 4pc 8x5x7500mm; * Extension tube 4pc 3.9x52mm 4pc3.9x122mm; * Cone type connector 8 pc 8x40mm* 4 pcs 10x53mm(M6 x 0.75), 4 pcs 10 x 60mm (M6 x1.0)

TT-085A Deluxe Vacuum/Fuel Pump Tester KitDiagnoses valve leaks,incorrect timing,leaky intake manifold & cloggedmufflers. 3-1/2"diameter gauge,includes 3 brass fittings and 4' tubing.

BT-095 Injector Pressure Testing DeviceTesting petrol and diesel fuel injector for examination of opening pressure , spraypattern and leaking tightness of the injection nozzles.Includes: 3.5 inch dial gauge reading 0-400 bar also reading 0-5800 psi .*Pressure line tread M12*1.5 with adaptor M14*1.5*M12 * 1.25 adaptor; *M17 * 0.75 adaptor

BT-090 Diesel injector test and calibrating hand pump• Material alumiuium alloy (A356) ; • 3.5 inch dial gauge reading 0-600 bar alsoreading 0-8700 Lbs/sq.lncg; •The liquid tank is provided with a filter.• Set included 2 pipes: M14xM14 and M14xM12 pipes.WARMING: Keep away from any heat places we recommend using special fluidsto operate this device properly,suck as Shell oil S.9365. or 1P Fanum Fluid Cd.

BT-095A Injector Pressure Testing DeviceTesting petrol and diesel fuel injector for examination of opening pressure , spraypattern and leaking tightness of the injection nozzles.Includes: *3.5 inch dial gauge reading 0-600 bar also reading 0-8700 Lbs/sq.lncg*Pressure line tread M12*1.5 with adaptor M14*1.5*M12 * 1.25 adaptor; *M17 * 0.75 adaptor

TT-085B Vacuum & Fuel Pressure Tester*Check fuel pump suction pressure; *Tests settings of the carburetor. *Checks forsticking valves,valve timing and burnt valves or insufficient valve tappet clearance.*Delect weak valve springs,worn valve stem guides or leaking head gasket.*Quick,accurate testing for many applications

OT-279 Cooling System Tester KitTest pressure cap and cooling system for leaks. Cap has rotating lever for finepressure adjustment. Include hand pump, tester head with 12” hose and cap testeradaptor in a plastic case. Also includes radiator adaptor and cap adaptor for testingNissan/Datsun, Mitsubishi, Mazda, Subaru, Toyota systems as well as Honda water-cooled motorcycles with 45mm cap. Readings are in both psi and kPa. To handlemost applications, see optional adaptors in chart below.

OT-278 Radiator & Cap Adapter Set applied for GM/Ford Threaded 1995 to current.

OT-951 Cooling System Tester* For Testing cooling systems and pressure caps for leaks * Cap features arotating level for fine pressure adjustment includesHand pump and tester headwith/2" hose Three popular adapters. OT-279A OT-279B OT-279C