05 - hardware - bullivants- lifting, rigging, safety ... · pdf file05 - hardware shackles...
TRANSCRIPT
05 -
HA
RD
WA
RE
ShacklesEyeboltsEyenuts, Lifting Loops & Concrete Lifting EyesRigging Screws & TurnbucklesWire Rope TerminationsThimblesFerrulesNCG Cable StockingsSheave BlocksHooks
106 - 147
WWW.BULLIVANTS.COM 107
05 -
HA
RD
WA
RE
ShacklesA shackle is used for interconnecting components in lifting, tensioning and staying systems. A shackle consists of a body, a removable pin and any applicable locking device.Types of ShacklesScrew Pin Shackles mainly used for non-permanent applications.Bolt with Safety Pin Shackles preferable for long term or permanent applications or where the load may slide on the pin causing rotation to the pin. Also used on equipment that may vibrate to ensure pin does not become dislodged.Dee Shackles only used for single leg applications - never multi leg as the body and pin may distort.Bow Shackles can be used on either single or multi-leg applications.Grade M Shackles generally comply with AS2741. In accordance with AS2741 shackles should be marked with
number.Grade S Shackles generally comply with Australian Standard 2741 with approximately twice the working load limit of Grade M Shackles. In accordance with AS2741 shackles should
material and batch number.Commercial Grade Shackles are not to be used for lifting purposes.Stainless Steel Shackles are not to be used for lifting purposes.Care & Use • Ensure that all markings are clearly legible. • Ensure pin is the correct type. Never replace the pin of a shackle with a bolt. • The threads of the pin and body are undamaged and the pin screws freely into position. • The body and pin is not unduly worn and free from distortion, nicks, gouges, cracks and excessive wear and corrosion. • The pin is screwed tightly with the collar and the pin is bedded evenly on the surface of the shackle eye. • The correct type of pin is used for the application. • A bolt type shackle has a split cotter (safety pin) attached correctly. • Shackles should not be heat treated as this may affect their working load limit. • Never modify, repair or reshape a shackle by welding, heating or bending as this will affect the working load limit.
Grade M Black Screw Dee Shackles: Unit of Measure - Each
OR
DER
CO
DE
Size
d (i
n.)
Size
d (m
m)
WLL
(ton
nes)
D (m
m)
W (m
m)
L (m
m)
Clo
sing
M
etho
d
Wei
ght (
kg)
160638 1/4” 6.35 0.25 10 13 25 Screw 0.09
160629 3/8” 9.53 0.50 13 19 38 Screw 0.18
160630 1/2” 12.70 0.75 16 28 54 Screw 0.37
160631 5/8” 15.88 1.50 19 32 63 Screw 0.66
160632 3/4” 19.05 2.00 22 38 73 Screw 1.04
160634 7/8” 22.23 3.00 25 44 83 Screw 1.61
160639 1” 25.40 3.80 29 51 95 Screw 2.27
160640 1 1/8” 28.58 5.00 32 54 105 Screw 3.24
Other sizes available.Tolerances on Dimensions +8% - 5% as per AS2741.
Grade M Galvanised Screw Dee Shackles: Unit of Measure - Each
OR
DER
CO
DE
Size
d (i
n.)
Size
d (m
m)
WLL
(ton
nes)
D (m
m)
W (m
m)
L (m
m)
Wei
ght (
kg)
160628 1/4” 6.35 0.25 10 13 25 0.09
160625 3/8” 9.53 0.50 13 19 38 0.18
160626 1/2” 12.70 0.75 16 28 54 0.37
160627 5/8” 15.88 1.50 19 32 63 0.66
160633 3/4” 19.05 2.00 22 38 73 1.04
160635 7/8” 22.23 3.00 25 44 83 1.61
160636 1” 25.40 3.80 29 51 95 2.27
160637 1 1/8” 28.58 5.00 32 54 105 3.24
160644 1 1/4” 31.75 6.00 35 60 114 4.5
160641 1 3/8” 34.93 7.00 38 67 127 6.18
160642 1 1/2” 38.10 9.50 44 70 137 8.22
Other sizes available.
The colour of the Shackle pin is related to the supplier and not the Standards.
05 -
HA
RD
WA
RE
1300 722 999108
Grade S Tested Galvanised Screw Bow Shackles: Unit of Measure - EachO
RD
ER C
OD
E
Size
d (m
m)
WLL
(ton
nes)
D (m
m)
W (m
m)
B (m
m)
L (m
m)
Wei
ght (
kg)
160554 5 0.33 6 10 15 22 0.02
160555 6 0.50 8 12 20 29 0.06
160556 8 0.75 10 13 21 31 0.11
160557 10 1.00 11 17 26 37 0.15
160558 11 1.50 13 18 29 43 0.21
160559 13 2.00 16 21 33 48 0.37
160560 16 3.25 19 27 43 61 0.65
160561 19 4.70 22 32 51 72 1.06
160562 22 6.50 25 37 58 84 1.56
160563 25 8.50 29 43 68 95 2.32
160573 29 9.50 32 46 74 108 3.30
160564 32 12.00 35 52 83 119 4.51
160574 35 13.50 38 57 92 133 5.93
160575 38 17.00 41 60 98 146 7.89
160577 44 25.00 51 73 127 178 14.99
160600 51 35.00 57 83 146 197 18.85
Other sizes available.
Grade S Tested Galvanised Screw Dee Shackles: Unit of Measure - Each
OR
DER
CO
DE
Size
d (m
m)
WLL
(ton
nes)
D (m
m)
W (m
m)
L (m
m)
Wei
ght (
kg)
160508 6 0.50 8 12 22 0.60
160509 8 0.75 10 13 26 0.11
160510 10 1.00 11 17 32 0.15
160511 11 1.50 13 18 37 0.21
160512 13 2.00 16 21 41 0.37
160513 16 3.20 19 27 51 0.65
160514 19 4.70 22 32 60 1.06
160515 22 6.50 25 37 71 1.56
160516 25 8.50 29 43 81 2.32
160528 29 9.50 32 46 90 3.28
160517 32 12.00 35 52 100 4.51
160529 35 13.50 38 57 113 5.93
160531 38 17.00 41 60 124 7.89
160532 44 25.00 51 73 146 14.99
Other sizes available.
WWW.BULLIVANTS.COM 109
05 -
HA
RD
WA
RE
Grade S Tested Galvanised Safety Pin Bow Shackles: Unit of Measure - Each
OR
DER
CO
DE
Size
d (m
m)
WLL
(ton
nes)
D (m
m)
w (m
m)
B (m
m)
L (m
m)
Wei
ght (
kg)
160565 13 2.00 16 21 33 48 0.44
160567 16 3.25 19 27 43 61 0.79
160569 19 4.75 22 32 51 72 1.06
160570 22 6.50 25 37 58 84 1.88
160572 25 8.50 29 43 68 95 2.78
160589 29 9.50 32 46 74 108 3.87
160591 32 12.00 35 52 83 119 5.26
160594 35 13.50 38 57 92 133 6.94
160595 38 17.00 41 60 98 146 8.79
160576 44 25.00 51 73 127 178 14.99
160598 51 35.00 57 83 146 197 20.65
160618 57 42.50 63 95 160 222 29.10
160602 63 55.00 70 105 184 267 41.05
160604 76 85.00 83 127 200 330 62.24
165024 89 120.00 95 146 241 381 110.00
Other sizes available.
Green Pin ShacklesVan Beest manufacture high quality Green Pin® Shackles. The Shackles can be
pin.Galvanised Safety Pin Bow Shackles: Unit of Measure - Each
OR
DER
CO
DE
Size
(in.
)
Size
(mm
)
WLL
(ton
nes)
Pin
Dia
. (m
m)
Wei
ght (
kg)
160581 3/8” 10 1.00 11 0.16
160605 7/16” 11 1.50 13 0.22
160584 1/2” 13 2.00 16 0.42
160585 5/8” 16 3.25 19 0.74
160607 3/4” 19 4.75 22 1.18
160608 7/8” 22 6.50 25 1.77
160587 1” 25 8.50 28 2.58
160592 1 1/4” 32 12.00 35 4.91
160599 2” 51 35.00 57 19.85
160619 2 1/4” 57 42.50 65 28.33
160603 2 1/2” 65 55.00 70 39.59
160623 3 1/2” 95 120.00 95 110.00
160624 4” 105 150.00 108 160.00
Other sizes available.
05 -
HA
RD
WA
RE
1300 722 999110
Galvanised Screw Bow Shackles: Unit of Measure - EachO
RD
ER C
OD
E
Size
(in.
)
Size
(mm
)
WLL
(ton
nes)
Pin
Dia
. (m
m)
Wei
ght (
kg)
160578 3/16” 5 0.33 6 0.02
160579 1/4” 6 0.50 8 0.05
160580 5/16” 8 0.75 10 0.10
160582 3/8” 10 1.00 11 0.14
160583 7/16” 11 1.50 13 0.19
160566 1/2” 13 2.00 16 0.36
160568 5/8” 16 3.25 19 0.63
160586 3/4” 19 4.75 22 1.01
160571 7/8” 22 6.50 25 1.50
160588 1” 25 8.50 28 2.21
160590 1 1/8” 29 9.50 32 3.16
160593 1 1/4” 32 12.00 35 4.31
160613 1 3/8” 35 13.50 38 5.55
160596 1 1/2” 38 17.00 42 7.43
160597 1 3/4” 45 25.00 50 12.84
160601 2” 51 35.00 57 18.15
Other sizes available.
Galvanised Screw Dee Shackles: Unit of Measure - Each
OR
DER
CO
DE
Size
(in.
)
Size
(mm
)
WLL
(ton
nes)
Pin
Dia
. (m
m)
Wei
ght (
kg)
160518 1/4” 6 0.50 6 0.05
160519 5/16” 8 0.75 10 0.09
160520 3/8” 10 1.00 11 0.14
160521 7/6” 11 1.50 13 0.19
160523 1/2” 13 2.00 16 0.32
160524 5/8” 16 3.25 19 0.54
160525 3/4” 19 4.75 22 0.87
160526 7/8” 22 6.50 25 1.34
160530 1 3/8” 35 13.50 38 5.14
160533 1 3/4” 44 25.00 50 11.45
Other sizes available.
WWW.BULLIVANTS.COM 111
05 -
HA
RD
WA
RE
Crosby G-2130 Safety Shackles: Unit of Measure - Each
OR
DER
CO
DE
Nom
. Siz
e (in
.)
WLL
(ton
nes)
* W
eigh
t Eac
h (k
g)
Dimensions (mm) Tolerance +/-
A B C D E F H L N C A
160676 1/2 2 0.36 20.6 16.0 47.8 12.7 33.3 30.2 83.5 58.5 12.7 3.30 1.50
160701 5/8 3-1/4 0.62 26.9 19.1 60.5 16.0 42.9 38.1 106.0 74.5 17.5 6.35 1.50
160702 3/4 4-3/4 1.23 31.8 22.4 71.5 19.1 51.0 46.0 126.0 89.0 20.6 6.35 1.50
160703 7/8 6-1/2 1.79 36.6 25.4 84.0 22.4 58.0 53.0 148.0 102.0 24.6 6.35 1.50
160704 1 8 8-1/2 2.28 42.9 28.7 95.5 25.4 68.5 60.5 167.0 119.0 26.9 6.35 1.50
160705 1-1/8 9-1/2 3.75 46.0 31.8 108.0 28.7 74.0 68.5 190.0 131.0 31.8 6.35 1.50
160706 1-1/4 12 5.31 51.5 35.1 119.0 31.8 82.5 76.0 210.0 146.0 35.1 6.35 1.50
160707 1-3/8 13-1/2 7.18 57.0 38.1 133.0 35.1 92.0 84.0 233.0 162.0 38.1 6.35 3.30
160708 1-1/2 17 8.62 60.5 41.4 146.0 38.1 98.5 92.0 254.0 175.0 41.1 6.35 3.30
160709 1-3/4 25 15.4 73.0 51.0 178.0 44.5 127.0 106.0 313.0 225.0 57.0 6.35 3.30
160710 2 35 23.7 82.5 57.0 197.0 51.0 146.0 122.0 348.0 253.0 61.0 6.35 3.30
* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.
Crosby G-209R ROV Shackles: Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
*
Wei
ght E
ach
(kg)
Dimensions (mm)
A +/- 6.35 B C H L O P S T
160711 6-1/2 1.79 36.6 25.4 84.0 148 102 50 58 17 10
160712 8-1/2 2.28 42.9 28.7 95.5 167 119 50 61 18 10
160713 9-1/2 3.75 46.0 31.8 108 190 131 70 83 18 12
160714 12 5.31 51.5 35.1 119 210 146 70 84 23 12
160715 13-1/2 7.18 57.0 38.1 133 233 162 75 91 23 15
160716 17 9.43 60.5 41.4 146 254 175 75 93 24 15
160717 †25 15.4 73.0 51.0 178 313 225 90 114 29 17.5
160718 †35 23.7 82.5 57.0 197 348 253 106 132 30 20
160719 †55 44.6 105 70.0 267 453 327 120 145 45 25
* Minimum Ultimate Load is 5 times the Working Load Limit.† Furnished with Galvanized Finish.
05 -
HA
RD
WA
RE
1300 722 999112
Commercial Grade ShacklesGalvanised Screw Pin Bow Shackles Commercial Grade: Unit of Measure - Each
Not approved for lifting applications.
OR
DER
CO
DE
Size
(mm
)
Gra
de
Wei
ght (
kg)
160666 5 Untested 0.28
160658 6 Untested 0.34
160659 8 Untested 0.70
160660 10 Untested 0.13
160661 12 Untested 0.26
160662 16 Untested 0.50
160663 20 Untested 0.80
Other sizes available.
Galvanised Screw Pin Dee Shackles Commercial Grade: Unit of Measure - Each
Not approved for lifting applications.
OR
DER
CO
DE
Size
(mm
)
Gra
de
Wei
ght (
kg)
160654 5 Untested 0.19
160651 6 Untested 0.34
160652 8 Untested 0.70
160653 10 Untested 0.13
160655 12 Untested 0.24
160656 16 Untested 0.55
160657 20 Untested 0.80
160664 22 Untested 1.30
160665 25 Untested 2.00
Gunnebo Standard Shackle No. 855 : Unit of Measure - Each
Standard: • U.S. Fed. Spec. RR.C-271/EN-13889 • DNV 2.7-1 Type Approval No. • S-5661 (WLL 2.0 to 25 tonnes)Material: • High Tensile strength • Quenched and Tempered, Grade 6Finish: • All parts hot dip galvanised • Brown colour markingDocumentation:
Temperature: • -20°C to 200°C
OR
DER
CO
DE
Nom
inal
Siz
e
WLL
(ton
nes)
kgs/
100
pcs
Gun
nebo
Pa
rt N
o.
160813 6 0.50 7 A085506
160814 8 0.75 13 A085508
160815 9 1.00 17 A085509
160816 11 1.50 25 A085511
160817 13 2.00 42 A085513
160818 16 3.25 70 A085516
160819 19 4.75 120 A085519
160820 22 6.50 170 A085522
160821 25 8.50 250 A085525
160822 28 9.50 340 A085528
160823 32 12.00 480 A085532
160824 35 13.50 700 A085535
160825 38 17.00 900 A085538
160826 45 25.00 1500 A085545
160827 50 35.00 2100 A085552
160828 57 42.50 2900 A085556
160829 65 55.00 4100 A085564
160830 75 85.00 6200 A085576
160831 89 120 11000 A085589
WWW.BULLIVANTS.COM 113
05 -
HA
RD
WA
RE
Gunnebo Arctic Shackle No. 856: Unit of Measure - Each
Standard: • U.S. Fed. Spec. RR.C-271/EN-13889 • DNV 2.7-1 Type Approval No. • S-5661 (WLL 2.0 to 25 tonnes)Material: • Special Alloy Steel, • Quenched and Tempered, Grade 8Finish: • All parts hot dip galvanised • Brown colour markingDocumentation:
Temperature: • -40°C to 200°C
OR
DER
CO
DE
Nom
inal
Siz
e
WLL
(ton
nes)
Wei
ght (
kgs)
Gun
nebo
Pa
rt N
o.
160832 1/2” - 13 2.00 0.42 A085613
160833 5/8” - 16 3.30 0.70 A085616
160844 3/4” - 19 4.80 1.20 A085619
160845 7/8” - 22 6.50 1.70 A085622
160846 1” - 25 8.50 2.50 A085625
160847 1.1/8” - 28 9.50 3.40 A085628
160848 1.1/4” - 32 12.00 4.80 A085632
160849 1.3/8” - 35 13.50 7.00 A085635
160850 1.1/2” - 38 17.00 9.00 A085638
160851 1.3/4” - 45 25.00 15.00 A085645
160852 2” - 50 35.00 21.00 A085652
160853 2 1/2” - 65 55.00 41.00 A085664
160854 3” - 75 85.00 62.00 A085676
Gunnebo Super Shackle No. 858: Unit of Measure - Each
Standard: • U.S. Fed. Spec. RR.C-271 • Type IVA Class 3, Grade BMaterial: • High Tensile Steel. • Quenched and Tempered, Grade 8Finish: • All parts hot dip galvanised • Brown colour markingSafety factor: • 5:1Documentation:
OR
DER
CO
DE
Nom
inal
Siz
e
WLL
(ton
nes)
Wei
ght(k
gs)
Gun
nebo
Pa
rt N
o.
160855 1/2” - 13 3.30 0.42 A085813
160856 5/8” - 16 5.00 0.70 A085816
160857 3/4” - 19 7.00 1.20 A085819
160858 7/8” - 22 9.50 1.70 A085822
160859 1” - 25 12.50 2.50 A085825
160860 1.1/8” - 28 15.00 3.40 A085828
160861 1.1/4” - 32 18.00 4.80 A085832
160862 1.3/8” - 35 21.00 7.00 A085835
160863 1.1/2” - 38 30.00 8.80 A085838
160864 1.3/4” - 45 40.00 15.00 A085845
160865 2” - 57 55.00 22.00 A085857
160866 2.1/2” - 70 85.00 38.00 A085870
160867 3.1/4” - 83 120 70.00 A085883
160868 4” - 95 150 110 A085895
All lifting shackles conforming to AS2741 are recognisable by markings showing - WLL, manufacturers id, grade of material and batch number - and will have a larger pin material than the body of the shackle. If in doubt contact Bullivants who have a trained team on hand to assist with your compliance and safety.
05 -
HA
RD
WA
RE
1300 722 999114
Gunnebo ROV Shackle No. 860: Unit of Measure - Each
Material: • High Tensile Steel. • Quenched and TemperedFinish: • All parts hot dip galvanised • Brown colour markingSafety factor: • 5:1Documentation:
OR
DER
CO
DE
Nom
inal
Siz
e
WLL
(ton
nes)
Wei
ght (
kgs)
Gun
nebo
Pa
rt N
o.
160869 32 12 4.80 A086032
160870 38 17 9.00 A086038
160871 45 25 15.00 A086045
160872 50 35 20.00 A086052
160873 65 55 41.00 A086064
Secured with threads and lock pin.
RUD VIP Foolproof Shackles - VV - GSCH: Unit of Measure - Each
• Clevis mounting • Bolt-pin retained by roll-pin for extra security
OR
DER
CO
DE
Cha
in S
ize
(mm
)
WLL
(ton
nes)
RU
D P
art N
o.
121911 6 1.5 VV GSCH 6
121912 8 2.5 VV GSCH 8
121913 10 4.0 VV GSCH 10
121914 13 6.7 VV GSCH 13
121915 16 10.0 VV GSCH 16
121916 20 16.0 VV GSCH 20
121626 22 20.0 VV GSCH 22
EyeboltsEyebolts of 12mm or smaller should not be used in general lifting, staying or tensioning purposes, because high torsional stresses are easily induced in smaller sizes by being screwed up too tightly.When installing an eyebolt it should be screwed fully down to the face of the lifted load.Types of EyeboltsForged Collared Eyebolts generally complies with AS2317. In accordance with AS2317 eyebolts should be marked with
WLL.DIN Standard 580/582 Eyebolts these eyebolts can be used for lifting but do not conform to AS2317. Normally supplied with metric coarse thread.Commercial Grade Eyebolts are not to be used for lifting purposes and should not be used for supporting loads.Stainless Steel Eyebolts are not to be used for lifting purposes.
and can be used for tensioning.
Care & Use • WLL markings are clear and suit the application. • Conduct a visual inspection for deformation and cracking. • Conduct a visual inspection of the inside eye for wear. • Conduct a visual inspection and check for damaged threads. • Ensure the thread centre is aligned with centre of eye. • Ensure the eyebolt’s thread form and the thread form in the corresponding hole or nut is the same. • Avoid excessive tightening of eyebolts. • Metric and imperial eyebolts that conform to the; Australian Standard have a safety factor of 6:1, DIN Standard have a safety factor of 5:1 and Grade 100 have a safety factor of 4:1. • When using eyebolts in pairs, it is essential that care be taken to properly align them. Eyebolts must not be forced into alignment as overstress will cause a reduction in the WLL. • A continuous sling should not be used with pairs of eyebolts. When lifting with pairs of eyebolts supported by slings, always use slings with individual lengths.Eyebolts should be inspected periodically by a competent person as per AS2317.
WWW.BULLIVANTS.COM 115
05 -
HA
RD
WA
RE
Lifting Collared Eyebolts - AS2317: Unit of Measure - EachEnsure that eyebolts are not screwed into threaded holes of a different size or type of thread.
OR
DER
CO
DE
Met
ric N
omin
al
Size
(mm
)
Impe
rial N
omin
al
(in.)
WLL
Axi
al (t
)
Trun
ion
Type
M
ount
ing
WLL
(to
nnes
)
Perp
endi
cula
r Ty
pe M
ount
ing
WLL
(ton
nes)
0º to
30º
WLL
(to
nnes
)
31º t
o 60
º WLL
(to
nnes
)
61º t
o 90
º WLL
(to
nnes
)
Thre
ad P
itch
Net
Wei
ght (
kg)
164178 M10 3/8” 0.25 0.06 0.12 0.31 0.2 0.12 1.5 0.06
164170 M12 1/2” 0.4 0.1 0.2 0.5 0.32 0.2 1.75 0.15
164172 M16 5/8” 0.8 0.2 0.4 1 0.64 0.4 2 0.28
164184 M20 3/4” 1.6 0.4 0.8 2 1.28 0.8 2.5 0.46
164197 M22 7/8” 2 0.5 1 2.5 1.6 1 2.5 0.85
164185 M24 1” 2.5 0.62 1.25 3.1 2 1.25 3 1.1
164201 M30 1 1/8” 4 1 2 5 3.2 2 3.5 2.1
164302 M36 n/a 6.3 1.57 3.1 7.9 5 3.1 4 3.7
Reduction factor for single eyebolt use
1 0.25 0.25 0.63 0.4 0.25
BSW Lifting Collared Eyebolts: Unit of Measure - Each
OR
DER
CO
DE
Size
(in.
)
WLL
(ton
nes)
Thre
ad P
itch
Net
Wei
ght
(kg)
164176 3/8 0.25 16 0.06
164179 1/2 0.4 12 0.14
164180 5/8 0.8 11 0.32
164182 3/4 1.6 10 0.53
164198 7/8 2 9 0.85
164200 1 2.5 8 1.1
Other sizes available.
UNC Thread Lifting Collared Eyebolts: Unit of Measure - Each
OR
DER
CO
DE
Size
(in.
)
WLL
(ton
nes)
Thre
ad P
itch
Net
Wei
ght
(kg)
164177 3/8 0.25 16 0.06
164171 1/2 0.4 13 0.15
164181 5/8 0.8 11 0.28
164183 3/4 1.6 10 0.46
164199 7/8 2 9 0.85
164186 1 2.5 8 1.1
164202 1 1/4 5 7 2.2
164203 1 1/2 7 6 3.7
Other sizes available.
General Purpose Zinc Eyebolts: Unit of Measure - Each
Not approved for lifting applications.
OR
DER
CO
DE
Size
(mm
)
Thre
ad P
itch
Net
Wei
ght
(kg)
164191 M8 1.25 0.03
164263 M10 1.5 0.06
164193 M12 1.75 0.13
164278 M16 2 0.21
164286 M20 2.5 0.38
164291 M24 3 0.83
05 -
HA
RD
WA
RE
1300 722 999116
RUD Starpoint Eyebolts - Grade 100 - VRS-F: Unit of Measure - Each
• 1 to 32 tonne • Multi-directional threaded design • *Stamped with F2 WLL • Adjusts to direction of pull • Can be used for both axial and angular loading
• Available in metric and UNC thread sizes
OR
DER
CO
DE
WLL
F1
(kg)
WLL
F2
(kg)
*
D (m
m)
K (m
m)
L (m
m)
RU
D P
art N
o.
164234 1000 400 25 47 12 VRS-F-M8
164235 1000 400 25 47 15 VRS-F-M10
164238 2000 750 30 56 18 VRS-F-M12
164243 4000 1500 35 65 24 VRS-F-M16
164245 6000 2300 40 75 30 VRS-F-M20
164247 8000 3200 48 90 36 VRS-F-M24
164396 12000 4500 60 112 45 VRS-F-M30
164397 16000 7000 72 135 54 VRS-F-M36
164398 24000 9000 82 158 63 VRS-F-M42
164266 32000 12000 94 180 72 VRS-F-M48
RUD Starpoint Eyebolt - UNC Imperial Thread - VRS-F: Unit of Measure - Each • Starpoint Eye Bolt with locking component (UNC thread) • 360° rotation • *Stamped with F2 WLL
OR
DER
CO
DE
WLL
F1
(kg)
WLL
F2
(kg)
*
D (m
m)
K (m
m)
L (m
m)
RU
D P
art N
o.
164236 1000 400 25 47 15 VRS-F 3/8” UNC
164239 2000 750 30 56 18 VRS-F 1/2” UNC
165460 4000 1500 35 63 24 VRS-F 5/8” UNC
165461 6000 2300 40 75 30 VRS-F 3/4” UNC
164391 6000 2300 40 75 32 VRS-F 7/8” UNC
165462 8000 3200 48 90 36 VRS-F 1” UNC
164248 12000 4500 60 112 45 VRS-F 1 1/4” UNC
165463 16000 7000 72 135 54 VRS-F 1 1/2” UNC
165464 24000 9000 82 158 63 VRS-F 1 3/4” UNC
165465 32000 12000 94 180 72 VRS-F 2” UNC
RUD Eyebolt - Grade 80 - RS: Unit of Measure - Each
• Can be used for both axial and angular loading • Metric (coarse) threads • Rated for use in both single-part and multi-part lifts • *Stamped with F2 WLL.
OR
DER
CO
DE
WLL
F1
(kg)
WLL
F2
(kg)
*
C (m
m)
D (m
m)
RU
D P
art N
o.
164445 400 100 12 25 RS-M6164255 800 200 12 25 RS-M8164264 1000 250 15 25 RS-M10164194 1600 400 18 30 RS-M12164446 3000 750 21 35 RS-M14164280 4000 1000 24 35 RS-M16164287 6000 1500 30 40 RS-M20164293 8000 2000 36 50 RS-M24164298 12000 3000 45 60 RS-M30164303 16000 4000 54 90 RS-M36164307 24000 6000 63 90 RS-M42164447 32000 8000 68 90 RS-M48
Eyenuts, Lifting Loops & Concrete Lifting EyesRUD Weld-On Eye Plates - VRBS: Unit of Measure - Each
• Multi-directional loading • Weld-on design • Forged alloy steel load ring
• Rated capacity can be
lashing applications
OR
DER
CO
DE
WLL
(kg)
B (m
m)
D (m
m)
E (m
m)
Wei
ght (
kg)
RU
D P
art N
o.
165041 4000 16 48 135 0.8 VRBS - 4165042 6700 20 60 170 1.8 VRBS - 6.7165043 10000 22 65 195 2.8 VRBS - 10165044 16000 30 90 266 6.6 VRBS - 16165045 30000 42 130 375 19 VRBS - 30165449 50000 70 250 620 85.0 VRBS - 50
WWW.BULLIVANTS.COM 117
05 -
HA
RD
WA
RE
RUD Uni Directional Ring Bolts - Grade 100: Unit of Measure - Each • 0.3 - 20 tonne • Omni directional • Simple mounting with only one hole required • Compact design • In-built clamping spring secures
• Longer bolts available for all sizes
• Load ring manufactured from Grade 80 material • Rotates through 360° • Fully rated for loading in any direction • Available in metric and UNC thread sizes
OR
DER
CO
DE
Nom
inal
Siz
e (k
g)
Gra
de
C (m
m)
H (m
m)
T (m
m)
RU
D P
art N
o.
164347 300 10.9 34 11 75 VLBG 0.3t M8164220 630 10.9 34 16 75 VLBG 0.63t M10164222 1000 10.9 34 21 75 VLBG 1t M12164399 1500 10.9 36 24 85 VLBG 1.5t M16164400 2500 10.9 54 32 110 VLBG 2.5t M20164401 4000 10.9 54 37 125 VLBG 4t M24164402 4000 10.9 65 39 147 VLBG 4t M27164403 5000 10.9 65 49 147 VLBG 5t M30164404 7000 8.8* 65 52 146 VLBG 7t M36164365 8000 10.9 82 63 197 VLBG 8t M36164369 10000 10.9 80 73 162 VLBG 10t M42164405 15000 10.9 100 63 222 VLBG 15t M42164406 20000 10.9 100 73 222 VLBG 20t M48*Captive bolt: VLBG automatically turns in direction of load
RUD Ring Bolt with Longer Vario Bolts - VLBG: Unit of Measure - Each
OR
DER
CO
DE
Nom
inal
Siz
e (k
g)
Gra
de
C (m
m)
H (m
m)
T (m
m)
RU
D P
art N
o.
165466 300 10.9 34 60 75 VLBG 0.3 M8 With Vario Bolt (H Max = 60)
165467 630 10.9 34 77 75 VLBG 0.63 M10 With Vario Bolt (H Max = 77)
165468 1000 10.9 34 91 75 VLBG 1 M12 With Vario Bolt (H Max = 91)
421252 1500 10.9 36 116 85 VLBG 1.5 M16 With Vario Bolt (H Max = 116)
421253 2500 10.9 54 152 110 VLBG 2.5 M20 With Vario Bolt (H Max 152)
421254 4000 10.9 54 176 125 VLBG 4 M24 With Vario Bolt (H Max = 176)
165469 5000 10.9 65 213 147 VLBG 5 M30 With Vario Bolt (H Max = 213)
421255 8000 10.9 82 158 197 VLBG 8 M36 With Vario Bolt (H Max = 158)
421256 10000 10.9 80 198 162 VLBG 10 M42 With Vario Bolt (H Max = 198)
165470 15000 10.9 100 188 222 VLBG 15 M42 With Vario Bolt (H Max = 188)
165471 20000 10.9 100 223 222 VLBG 20 M48 With Vario Bolt (H Max = 223)
RUD Ring Bolt with UNC Bolt (Imperial) - VLBG-Z: Unit of Measure - Each
OR
DER
CO
DE
Nom
inal
Siz
e (k
g)
C (m
m)
H (m
m)
T (m
m)
RU
D P
art N
o.
164221 1000 34 22 75 VLBG-Z 1 1/2” UNC164223 1500 36 24 85 VLBG-Z 1.5 5/8” UNC164226 2500 54 28 110 VLBG-Z 2.5 3/4” UNC164353 2500 54 27 110 VLBG-Z 2.5 7/8” UNC164228 4000 54 41 125 VLBG-Z 4 1” UNC165482 5000 82 41 147 VLBG-Z 5 1 1/4” UNC
05 -
HA
RD
WA
RE
1300 722 999118
RUD Weld-On Load Rings - Grade 100: Unit of Measure - Each
• 1.5 to 16 tonne • Multi-directional loading • Weld-on design • Forged alloy steel load ring with captive position holding spring
lashing applications • Available with and without internal position holding springs
OR
DER
CO
DE
WLL
(kg)
C (m
m)
E (m
m)
F (m
m)
RU
D P
art N
o.
165049 1500 38 40 13.5 VLBS-1.5
165472 2500 45 48 13.5 VLBS-2.5
165050 4000 51 52 16.5 VLBS-4
165051 6700 67 73 22.5 VLBS-6.7
165052 10000 67 71 26.5 VLBS-10
165053 16000 100 105 26.5 VLBS - 16
RUD Weld-On Load Rings with Spring: Unit of Measure - Each • With captive position holding spring
OR
DER
CO
DE
WLL
(kg)
C (m
m)
E (m
m)
F (m
m)
RU
D P
art N
o.
165473 1500 38 40 13.5 VLBS-1.5 with spring
165474 2500 45 48 13.5 VLBS-2.5 with spring
165475 4000 51 52 16.5 VLBS-4 with spring
165476 6700 67 73 22.5 VLBS-6.7 with spring
165477 10000 67 71 26.5 VLBS-10 with spring
RUD Uni-Directional Variable Length Swivel Lifting Rings - Grade 100 - VWBG-V: Unit of Measure - Each
• 0.3 - 5 tonne • Designed for loads that need to be turned or rotated • Will rotate 360° under load • Thread size M8 - M30 • Oversized load rings • Longer bolts available for all sizes
OR
DER
CO
DE
WLL
(kg)
A (m
m)
C (m
m)
F (m
m)
RU
D P
art N
o.
164407 300 8 29 12 VWBG-V-0.3 M8164378 450 8 29 15 VWBG-V-O.5 M10164379 600 10 35 21 VWBG-V-0.6 M12164381 1300 10 35 30 VWBG-V-1.3 M16164408 2000 13 35 33 VWBG-V-2.0 M20164384 3500 18 40 40 VWBG-V-3.5 M24164409 5000 22 50 50 VWBG-V-5.0 M30
RUD Heavy-duty Uni-Directional Swivel Lifting Rings - Grade 100 - VWBG: Unit of Measure - Each
• 8 - 40 tonne • Designed for loads that need to be turned or rotated • Will rotate 360° under load • Thread size M36 - M90 • Oversized load rings
OR
DER
CO
DE
WLL
(kg)
A (m
m)
C (m
m)
F (m
m)
RU
D P
art N
o.
164385 8000 22 50 54 VWBG 8 M36164386 12000 26 65 63 VWBG 12 M42164410 13000 26 65 68 VWBG 13 M48164411 16000 32 70 84 VWBG 16 M56164412 16000 32 70 94 VWBG 16 M64164413 40000 46 90 135 VWBG 40 M90
WWW.BULLIVANTS.COM 119
05 -
HA
RD
WA
RE
RUD Metric Course Eyenut - Grade 80 - RM: Unit of Measure - Each
• Can be used for both axial and angular loading • Metric (coarse) threads • Rated for use in both single-part and multi-part lifts
OR
DER
CO
DE
WLL
F1
(kg)
WLL
F2
(kg)
A (m
m)
C (m
m)
D (m
m)
RU
D P
art N
o.164414 400 100 35 11 25 RM-M6164415 800 200 35 11 25 RM-M8164416 1000 250 35 11 25 RM-M10164417 1600 400 41 13 30 RM-M12164418 3000 750 48 15 35 RM-M14164419 3200 800 48 15 35 RM-M16164420 6000 1500 55 17 40 RM-M20164421 8000 2000 70 21 50 RM-M24164422 12000 3000 85 26 60 RM-M30164423 16000 4000 130 43 90 RM-M36164424 24000 6000 130 43 90 RM-M42164425 32000 8000 130 43 90 RM-M48
RUD Bolt-On Eye Plates - Grade 80 - RBG/VRBG: Unit of Measure - Each
• 3 to 80 tonne • Multi-directional loading • Bolt-On design • Load ring manufactured from Grade 80 material
lashing applications
OR
DER
CO
DE
WLL
(kg)
D (m
m)
L (m
m)
Bol
t
RU
D P
art N
o.
164426 3200 48 178 M16 x 50 RBG - 3164427 10000 65 194 M20 x 70 VRBG - 10164428 16000 90 270 M30 x 90 VRBG - 16
RUD Weld-On Swivelling Eye Connection - WPP-B: Unit of Measure - Each • Non swivelling versions available on request
OR
DER
CO
DE
WLL
(kg)
A (m
m)
B (m
m)
C (m
m)
D (m
m)
E (m
m)
G (m
m)
RU
D P
art N
o.
121900 630 9 65 35 40 105 40 WPP-B 0.63t121024 1500 11 65 35 46 115 50 WPP-B 1.5t121901 2500 13 74 40 61 135 61 WPP-B 2.5t121902 4000 16 95 45 80 172 77 WPP-B 4t121903 5000 21 130 60 95 223 93 WPP-B 5t121904 8000 24 140 65 100 242 102 WPP-B 8t
RUD Weld-On Swivelling Universal Connection - WPP-S: Unit of Measure - Each • Will rotate 360° under load • Complete with welding instructions • Fixed welded versions also available
OR
DER
CO
DE
WLL
(kg)
A (m
m)
B (m
m)
C (m
m)
D (m
m)
E (m
m)
F (m
m)
RU
D P
art N
o.
121905 630 13 75 18 40 115 40 WPP-S 0.63t121906 1500 20 97 25 46 147 50 WPP-S 1.5t121907 2500 28 126 30 61 187 61 WPP-S 2.5t121908 4000 36 150 35 80 227 77 WPP-S 4t121909 5000 37 174 40 95 267 93 WPP-S 5t121910 8000 49 208 48 100 310 102 WPP-S 8t
05 -
HA
RD
WA
RE
1300 722 999120
RUD PP-B Bolt-On Swivelling: Unit of Measure - EachO
RD
ER C
OD
E
WLL
(kg)
A (m
m)
B (m
m)
C (m
m)
D (m
m)
E (m
m)
F (m
m)
G (m
m)
M (m
m)
SW (m
m)
RU
D P
art N
o.
164429 630 9 65 35 40 105 18 41 12 36 PP-B M12
164430 1500 11 65 35 46 115 24 50 16 41 PP-B M16
164431 2500 13 75 40 61 135 30 61 20 55 PP-B M20
164432 4000 16 95 45 78 172 36 78 24 70 PP-B M24
164433 5000 21 130 60 95 223 45 93 30 85 PP-B M30
164434 8000 24 140 65 100 242 54 102 36 90 PP-B M36
RUD PP-S Bolt-On Swivel Universal Connection - Metric: Unit of Measure - Each • New generation bolt-on lifting system • Quick and easy to mount • Double ball-bearings provide 360° rotation under load • 4:1 safety factor on WLL
OR
DER
CO
DE
WLL
(kg)
A (m
m)
B (m
m)
C (m
m)
D (m
m)
E (m
m)
F (m
m)
G (m
m)
M (m
m)
SW (m
m)
RU
D P
art N
o.
164435 630 3 75 18 40 116 18 41 12 36 PP-S M12
164436 1500 20 9 25 46 147 25 50 16 41 PP-S M16
164437 2500 28 126 30 61 187 30 61 20 55 PP-SM20
164438 4000 36 150 35 78 227 36 77 24 70 PP-S M24
164439 5000 37 174 40 95 267 45 93 30 85 PP-S M30
164440 8000 49 208 48 100 310 54 102 36 90 PP-S M36
RUD ABA Weld-On Lifting Point: Unit of Measure - Each • Manufactured in Germany using high tensile CrNiMo - steel • 100% Electro-magnetic crack detection tested • Complies with DIN 5691 and EN 1677 • 4:1 safety factor on WLL • Temperature Range -40°C to 100°C no reduction in WLL • Full working load in all directions • Patented wear markings on the inside and on the outside
OR
DER
CO
DE
WLL
(kg)
A (m
m)
B (m
m)
C (m
m)
D (m
m)
E (m
m)
F (m
m)
T (m
m)
Wei
ght (
kg)
RU
D P
art N
o.
165478 1600 30 16 100 35 16 57 41.5 0.44 ABA 1.6t
165479 3200 41 23 137 50 21 80 59 1.1 ABA 3.2t
165480 5000 51 27 172 60 27.5 99 71.5 2.3 ABA 5t
165481 10000 70 38 228 80 35 130 95 5.3 ABA 10t
165483 20000 90 52 272 115 40 175 135 10.7 ABA 20t
165484 31500 108 64 320 130 50 204 154 18.3 ABA 31.5t
WWW.BULLIVANTS.COM 121
05 -
HA
RD
WA
RE
Gunnebo ELP Eye Lifting Point Grade 80: Unit of Measure - Each • Suitable for 1 legged slings
• Forged in Grade 80 material that permits higher WLL than conventional DIN 580 eyebolts.
OR
DER
CO
DE
WLL
(ton
nes)
B (m
m)
D (m
m)
G (m
m)
H (m
m)
L (m
m)
M (m
m)
Wei
ght (
kg)
Gun
nebo
Pa
rt N
o.
164279 1.0** 72 16 42 55 24 M16 0.4 ELP-M16-8
165028 1.5 ** 72 16 42 57 30 M20 0.5 ELP-M20-8
164292 2.0 ** 88 19 48 70 36 M24 0.9 ELP-M24-8
164297 3.0 ** 106 22 60 84 45 M30 1.4 ELP-M30-8
165029 4.0 ** 127 26 72 100 54 M36 2.3 ELP-M36-8
** In case of 1-leg application where loading is limited to straight loading in the direction of thread (no bending force) it is possible to use ELP with four times higher WLLNote: Threaded depths need to be at least 1xM for steel, 1.25 x M for cast iron and 2 x M for aluminium alloy.
Gunnebo RLP Rotating Lifting Point Grade 10: Unit of Measure - EachSuitable for applications where a conventional lifting point would not be fully adequate. Intended to be used as a Lifting Point, Lashing Point or Towing attachment. • Dismountable open D-ring. Enables assembly of roundsling, master link, link or hook directly onto the RLP. • Hexagon-headed screw for easy assembly/disassembly by means of ordinary wrench. • Forged in Grade 10 material permits higher WLL than Grade 8 and DIN 580 eyebolts. • For lifting with single or multi-leg slings. • Safety factor 4:1. • RLP can rotate 360° and articulate 180°. • Longer bolt can be supplied on request.
OR
DER
CO
DE
WLL
(all
dire
ctio
ns)
tonn
es
WLL
(str
aigh
t lift
) to
nnes
Bol
t Siz
e (m
m)
B (m
m)
D (m
m)
G (m
m)
H (m
m)
L (m
m)
Wei
ght (
kg)
Gun
nebo
Pa
rt N
o.
164346** 0.3 0.6 M8 42 12 35 60 15 0.3 RLP M8-10
164349** 0.5 1.0 M10 42 12 34 60 20 0.3 RLP M10-10
164350** 0.75 1.5 M12 57 19 46 85 19 0.9 RLP M12-10
164352** 1.5 3.0 M16 57 19 44 85 24 0.9 RLP M16-10
164354** 2.5 5.0 M20 83 28 56 111 32 2.8 RLP M20-10
164356 3.5 7.0 M24 83 28 53 111 37 2.8 RLP M24-10
165031 6.0 12.0 M30 114 34 69 144 49 7 RLP M30-10
165032 8.0 14.0 M36 114 34 65 144 61 7.3 RLP M36-10
165033 14.0 16.0 M42 149 40 90 185 65 14 RLP M42-10
165034 16.0 20.0 M48 149 40 86 185 75 14.9 RLP M48-10
** Available in UNC thread; 5/16”, 3/8”, 7/16”, 5/8”, 3/4”
05 -
HA
RD
WA
RE
1300 722 999122
Gunnebo SLP Screw-on Lifting Points Grade 80: Unit of Measure - Each • For use in applications where welding is not possible. • Forged D-ring and housing in Grade 80 material.
OR
DER
CO
DE
WLL
(ton
nes)
B (m
m)
C (m
m)
D (m
m)
H (m
m)
L (m
m)
M (m
m)
T (m
m)
R (m
m)
Wei
ght (
kg)
Gun
nebo
Pa
rt N
o.
165025 1.0 50 72 14 98 55 M14 139 24 0.9 SLP-1T
165026 3.0 58 84 17 114 50 M16 144 29 1.4 SLP-3T
164374 5.0 64 116 22 160 74 M20 203 33 2.9 SLP-5T
Gunnebo Weldable Lifting Point type WLP without Spring Grade 8: Unit of Measure - EachWeld-on lifting point for towing, lashing and lifting applications. • Forged D-ring and housing in Grade 80 material.
• Flat design • Can be supplied with or without spring for stay up function.
OR
DER
CO
DE
WLL
(ton
nes)
B (m
m)
D (m
m)
G (m
m)
L (m
m)
R (m
m)
T (m
m)
Wei
ght (
kg)
Gun
nebo
Pa
rt N
o.
164174 1.0 50 14 27 53 24 95 0.5 WLP-1T
164175 3.0 58 17 34 48 29 97 0.9 WLP-3T
164230 5.0 64 22 41 73 33 135 1.7 WLP-5T
165002 8.0 60 25 50 68 35 145 24 WLP-8T*
164232 15.0 88 34 65 92 40 190 5.8 WLP-15T*
* Painted red, without spring.
Gunnebo Universal Weld-on Hook UKN: Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
B (m
m)
C (m
m)
G (m
m)
H (m
m)
K (m
m)
L (m
m)
S(m
m)
Wei
ght (
kg)
Gun
nebo
Pa
rt N
o.
121307 1.0 20 72 17 25 25 95 6 0.6 UKN-1***
121138 2.0 26 86 20 30 30 114 8 1.0 UKN-2***
121139 3.0 30 105 23 32 35 132 10 1.3 UKN-3
121309 4.0 29 114 29 38 42 140 11 1.9 UKN-4
121310 5.0 34 131 30 47 45 165 12 2.9 UKN-5
121312 8.0 34 133 40 51 50 172 13 3.5 UKN-8
121313 10.0 47 170 43 58 55 220 14 6.4 UKN-10
121928 15.0 53 188 50 67 60 240 15 8.8 UKN-15
If welding on to an excavator or its accessories we recommend that the working load limit is reduced, where necessary, to meet any appropriate legislative requirements. Please contact Bullivants for further information.***Welding plate slightly curved
WWW.BULLIVANTS.COM 123
05 -
HA
RD
WA
RE
PWB Grade 80 Weld-On Hook: Unit of Measure - Each
for axial loading and positive locking with the safety latch.Welding instructions supplied with each unit.
OR
DER
CO
DE
WLL
(ton
nes)
P (m
m)
L (m
m)
T (m
m)
H (m
m)
W (m
m)
A (m
m)
M (m
m)
Mas
s (k
g)
PWB
Par
t No.
.
122555 1 18 70 18 27 95 7 4 0.6 40915Y
122556 2 25 85 20 30 115 8 5 1 40916Y
122557 3 28 107 23 30 133 9 6 1.4 40919Y
122558 4 28 114 30 38 142 10 7 2 40920Y
122559 5 30 135 31 47 167 12 7 3 40917Y
122560 8 32 137 39 52 176 12 8 3.8 40921Y
122561 10 44 170 42 56 222 13 8 6.3 40918Y
PWB Grade 80 Weld-On Lifting Point: Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
W (m
m)
K (m
m)
R (m
m)
L (m
m)
Mas
s (k
g)
PWB
Par
t No.
.
122562 1 50 38 24 105 0.5 42285
122563 3 58 48 29 112 0.8 42286
122564 5 64 61 33 154 1.8 42287
122565 8 61 73 34 169 2.6 42288
122566 10 75 73 41 191 3.1 42289
122567 15 91 93 50 234 6.5 42290
PWB Grade 80 Bolt-On Tie-Down Point: Unit of Measure - Each
• Supplied without bolt assembly.
OR
DER
CO
DE
WLL
(ton
nes)
A (m
m)
B (m
m)
R (m
m)
M (m
m)
K (m
m)
L (m
m)
Mas
s (k
g)
PWB
Par
t No.
.
122568 1 50 72 24 14 98 139 0.8 42277
122569 3 58 84 29 16 114 144 1.1 42278
122570 5 64 116 33 20 160 203 2.5 42279
*Distributed by PWB Anchor
*Distributed by PWB Anchor
*Distributed by PWB Anchor
05 -
HA
RD
WA
RE
1300 722 999124
Black Metric Eyenuts: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
Thre
ad P
itch
Net
Wei
ght
(kg)
164314 M10 1.5 0.12
164316 M12 1.75 0.18
164321 M16 2 0.3
164207 M20 2.5 0.57
Other sizes available.
Zinc Metric Eyenuts: Unit of Measure - Each
Not approved for lifting applications.
OR
DER
CO
DE
Size
(mm
)
Thre
ad P
itch
Net
Wei
ght
(kg)
164315 M10 1.5 0.1
164317 M12 1.75 0.15
164206 M16 2 0.24
Other sizes available.
UNC Thread Eyenut: Unit of Measure - Each
OR
DER
CO
DE
Size
(in.
)
Thre
ad P
itch
Net
Wei
ght
(kg)
164319 1/2” 13 0.18
3/8” to 3” available
BSW Thread Eyenut: Unit of Measure - Each
OR
DER
CO
DE
Size
(in.
)
Thre
ad P
itch
Net
Wei
ght
(kg)
164320 5/8 11 0.3
164328 1 8 1.20
3/8” to 3” available
Forged Lifting Loop: Unit of Measure - Each
OR
DER
CO
DE
Nom
. Siz
e (m
m)
Thre
ad P
itch
Wei
ght (
kg)
164173 24 3 1.28
20mm & 45mm also available
Concrete Lifting Eye: Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
633121 1.3
633122 2.5
633131 5
125
05 -
HA
RD
WA
RE
Working Load Limits (in tonnes) for symmetrical loading
OR
DER
CO
DE
Single Point WLL (tonne)
2, 3 or 4 Point
Maximum Included Angle
60° 90° 120°
165451 2.0 3.4 2.8 2.0
164453 4.0 6.9 5.6 4.0
165452 6.7 11.6 9.5 6.7
WARNING - NEVER EXCEED THE WORKING LOAD LIMIT (WLL).
WELD ON LIFTING POINT
MANUFACTURED IN AUSTRALIA USING
ONLY HEAT CERTIFIED AUSTRALIAN STEEL.
1300 722 999www.bullivants.com
Bullivants BlueLink Weld On Lifting Point: Unit of Measure - EachFeatures:• Australian made
• Forged D-ring and housing in Grade 100 material
• Flat design
• Multi directional loading
lashing applications
05 -
HA
RD
WA
RE
1300 722 999126
Rigging Screws & TurnbucklesTypes of Turnbuckles and Rigging ScrewsGrade L Rigging Screws & Turnbuckles must comply with AS2319. In accordance with AS2319 turnbuckles and rigging screws
Commercial Grade Turnbuckles are not to be used for lifting purposes. Commercial Grade Turnbuckles are not made to any standard. Usually used for tensioning or supporting light loads.Care & Use • Ensure the WLL suits the application. • Markings can be clearly read.
• Conduct a visual inspection for nicks, gouges, cracks and corrosion. • Conduct a visual inspection for damaged screw threads. • Care should be taken to ensure that rigging screws and turnbuckles are not excessively tightened.Turnbuckles and rigging screws should be inspected periodically by a competent person as per AS2319Rigging ScrewsRigging Screws are used to provide a means for length adjustment and for tensioning. They are also used with guys for masts, towers and other structures and engineering applications.
and the like.An observation hole is provided at the inner end of the thread, at each end of the body, which permits visual observation of the
Additionally, rigging screws have the innate facility for continuing lubrication as the enclosed section of the body provides a suitable reservoir for grease or other lubrication. Hence, they have an advantage in relative corrosive applications such as ship’s rigging and permanent outdoor guys.Rigging screws are not designed for continuous adjustment under rated load conditions.TurnbucklesTurnbuckles have the same applications as rigging screws, but generally have smaller size range and shorter adjustment.
for providing means for locking while in service.Turnbuckles are not designed for continuous adjustment under rated load.
Grade L Rigging ScrewsGrade L Rigging Screw - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
C (m
m)
D (m
m)
E (m
m)
F (m
m)
K (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
160063 12 340 525 15 35 8.5 230 10 0.5 0.97
160068 16 360 535 20 40 9 230 12 0.75 1.36
160070 20 390 555 22 46 10.5 230 16 1.25 2.35
160075 24 555 740 30 58 13 360 20 2.5 4.2
Other sizes available.
Grade L Rigging Screw - Eye & Eye: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
E (m
m)
F (m
m)
G (m
m)
H (m
m)
J (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
160046 16 350 525 9 230 17 36 12 0.75 1.09
160047 20 380 545 10.5 230 21 42 12 1.25 1.72
160072 24 540 725 13 360 25 51 17 2.5 3.2
Other sizes available.
WWW.BULLIVANTS.COM 127
05 -
HA
RD
WA
RE
Grade P Rigging ScrewsGrade P Rigging Screws - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
C (m
m)
D (m
m)
E (m
m)
F (m
m)
K (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
160064 12 340 525 15 35 8.5 230 10 1.00 0.97
160069 16 360 535 20 40 9.0 230 12 1.60 1.36
160071 20 390 555 22 46 10.5 230 16 2.50 2.35
165005 24 555 740 30 58 13.0 360 20 4.00 5.20
160079 M33 628 904 38 75 14.0 380 24 8.00 11.20
Other sizes available.
Grade P Rigging Screws - Eye & Eye: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
E (m
m)
F (m
m)
G (m
m)
H (m
m)
J (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
160675 16 350 525 9.0 230 17 36 12 1.60 1.09
160048 20 380 545 10.5 230 21 42 12 2.50 1.72
165006 24 540 725 13.0 360 25 51 17 4.00 3.20
160785 M33 660 936 14.0 380 33 70 24 8.00 9.11
Other sizes available.
Grade L TurnbucklesGrade L Turnbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
B (m
m)
C (m
m)
D (m
m)
F (m
m)
K (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
160875 10 240 350 30 14 30 150.0 10 0.30 0.50
160099 12 335 470 36 15 35 190.5 10 0.50 0.84
160053 16 355 490 45 20 40 204.0 12 0.75 1.53
160114 20 440 520 46 22 46 216.5 16 1.25 2.79
160123 24 450 585 59 30 58 232.0 20 2.50 4.57
Other sizes available.
Grade L Turnbuckles - Eye & Eye: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
F (m
m)
G (m
m)
H (m
m)
J (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
160093 10 230 335 150.0 11 21 7 0.30 0.35
160094 12 330 470 190.5 15 30 9 0.50 0.67
160102 16 350 485 204.0 17 36 12 0.75 1.55
160111 20 385 515 216.5 21 42 14 1.25 2.16
160119 24 440 570 232.0 25 51 17 2.50 3.20
Other sizes available.
05 -
HA
RD
WA
RE
1300 722 999128
Grade L Turnbuckles - Clevis (Jaw) & Eye: Unit of Measure - EachO
RD
ER C
OD
E
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
B (m
m)
C (m
m)
D (m
m)
F (m
m)
G (m
m)
H (m
m)
J (m
m)
K (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
165011 10 235 340 30 14 30 150.0 11 21 7 10 0.30 0.30
160097 12 330 470 36 15 35 190.5 15 30 9 10 0.50 0.50
165012 16 355 490 45 20 40 204.0 17 36 12 12 0.75 0.75
160055 20 390 520 55 22 46 215.5 21 42 14 16 1.25 1.25
160121 24 445 580 59 30 58 232.0 25 51 17 20 2.50 2.50
Other sizes available.
Grade P TurnbucklesGrade P Turnbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
B (m
m)
C (m
m)
D (m
m)
F (m
m)
K (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
160050 12 335 470 36 15 35 190.5 10 1.00 0.84
160105 16 355 490 45 20 40 204.0 12 1.60 1.60
160115 20 440 520 46 22 46 216.5 16 2.50 2.80
160124 24 450 585 59 30 58 232.0 20 4.00 4.57
160876 M33 630 780 78 38 76 252.0 24 8.00 8.00
Other sizes available.
Grade P Turnbuckles - Eye & Eye: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
F (m
m)
G (m
m)
H (m
m)
J (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
160103 16 350 485 204.0 17 36 12 1.60 1.50
160112 20 385 515 216.5 21 42 14 2.50 2.16
160120 24 440 570 232.0 25 51 17 4.00 3.50
160877 M33 656 806 252.0 33 70 24 8.00 6.50
Other sizes available.
Grade P Turnbuckles - Clevis (Jaw) & Eye: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
Clo
sed
A (m
m) O
pen
B (m
m)
C (m
m)
D (m
m)
F (m
m)
G (m
m)
H (m
m)
J (m
m)
K (m
m)
WLL
(ton
nes)
Wei
ght (
kg)
160098 12 330 470 36 15 35 190.5 15 30 9 10 1.00 0.70
160113 20 390 520 55 22 46 215.5 21 42 14 16 2.50 2.50
160122 24 445 580 59 30 58 232.0 25 51 17 20 4.00 4.00
160878 M33 643 793 78 38 76 252.0 33 70 24 24 8.00 7.50
Other sizes available.
WWW.BULLIVANTS.COM 129
05 -
HA
RD
WA
RE
Commercial Grade TurnbucklesCommercial Grade Eye & Eye Turnbuckles: Unit of Measure - EachNot approved for lifting applications.
OR
DER
CO
DE
Size
(mm
)
Styl
e
Wei
ght (
kg)
160153 5 Eye & Eye 0.02
160154 6 Eye & Eye 0.16
160148 8 Eye & Eye 0.24
160149 10 Eye & Eye 0.36
160150 12 Eye & Eye 0.64
160151 16 Eye & Eye 1.44
160155 20 Eye & Eye 2.55
160160 22 Eye & Eye 3.53
160163 25 Eye & Eye 4.34
Commercial Grade Hook & Eye Turnbuckles: Unit of Measure - EachNot approved for lifting applications.
OR
DER
CO
DE
Size
(mm
)
Styl
e
Wei
ght (
kg)
160158 5 Hook & Eye 0.02
160144 6 Hook & Eye 0.16
160145 8 Hook & Eye 0.24
160146 10 Hook & Eye 0.36
160147 12 Hook & Eye 0.64
160152 16 Hook & Eye 1.44
160156 20 Hook & Eye 2.55
160161 22 Hook & Eye 3.53
160157 25 Hook & Eye 4.34
• Hot dip galvanised steel.
• Turnbuckles recommended for straight on in-line pull only.
Type 1, Form 1 - Class 7, except those provisions required by the contractor. • Proof load is 2.5 times the WLL. Ultimate load is 5 times the WLL.
Superbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
OR
DER
CO
DE
Thre
ad D
ia. &
Ta
ke u
p (in
.)
Thre
ad D
ia. &
Ta
ke u
p (m
m)
WLL
(ton
nes)
Styl
e
A (m
m)
B (m
m)
E (m
m)
G (m
m)
J (m
m)
K (m
m)
M (m
m)
N (m
m)
BB
(mm
)
Wei
ght (
kg)
165007 3/8 x 6 9.53 x 152 0.54 Jaw & Jaw 9.65 13.7 54 22.1 410 258 441 289 152 0.37
160051 1/2 x 12 12.7 x 305 1.00 Jaw & Jaw 12.70 16.5 70 26.9 775 445 813 483 305 1.09
160052 5/8 x 12 15.9 x 305 1.59 Jaw & Jaw 16.00 20.1 89 33.3 814 478 867 530 305 1.77
160054 3/4 x 12 19.1 x 305 2.36 Jaw & Jaw 19.10 23.9 106 38.1 851 508 917 574 305 2.98
160109 3/4 x 18 19.1 x 457 2.36 Jaw & Jaw 19.10 23.9 106 38.1 1156 660 1222 726 457 3.64
160057 7/8 x 12 22.2 x 305 3.27 Jaw & Jaw 22.40 28.7 123 44.5 892 543 967 618 305 3.71
160128 1 x 12 25.4 x 305 4.54 Jaw & Jaw 25.40 34.0 140 52.5 933 577 1018 662 305 5.53
160135 1-1/4 x 18 31.8 x 457 6.89 Jaw & Jaw 31.80 44.5 183 71.5 1317 796 1423 903 457 11.2
160143 1-1/2 x 18 38.1 x 457 9.71 Jaw & Jaw 38.10 52.3 200 71.5 1359 826 1486 953 457 16.7
160139 2 x 24 51.0 x 610 16.80 Jaw & Jaw 51.00 66.5 301 93.5 1766 1157 1949 1339 610 42.8
160140 2-1/2 x 24 63.5 x 610 27.20 Jaw & Jaw 63.5 76.5 344 113.0 1854 1244 2087 1478 610 75
Other sizes available.
05 -
HA
RD
WA
RE
1300 722 999130
Superbuckles - Eye & Eye: Unit of Measure - Each
OR
DER
CO
DE
Thre
ad D
ia. &
Ta
ke u
p (in
.)
Thre
ad D
ia. &
Ta
ke u
p (m
m)
WLL
(ton
nes)
Styl
e
A (m
m)
J (m
m)
K (m
m)
M (m
m)
N (m
m)
R (m
m)
S (m
m)
X C
lose
d (m
m)
BB
(mm
)
Wei
ght (
kg)
160108 3/4 x 12 19.1 x 305 2.3 Eye & Eye 19.1 911 568 943 600 53 25.4 119 304 2.49
160056 7/8 x 12 22.2 x 305 3.27 Eye & Eye 22.4 942 592 980 630 60.4 31.7 130 304 3.27
160130 1-1/4 x 12 31.8 x 305 6.89 Eye & Eye 31.8 1087 719 1145 776 90.5 46 196 304 8.62
Other sizes available.
Superbuckles - Clevis (Jaw) & Eye: Unit of Measure - Each
OR
DER
CO
DE
Thre
ad D
ia. &
Ta
ke u
p (in
.)
Thre
ad D
ia. &
Ta
ke u
p (m
m)
WLL
(ton
nes)
Styl
e
A (m
m)
B (m
m)
E C
lose
d (m
m)
G (m
m)
J O
pen
(mm
)
K C
lose
d (m
m)
M O
pen
(mm
)
N C
lose
d (m
m)
R (m
m)
S (m
m)
X C
lose
d (m
m)
BB
(mm
)
Wei
ght (
kg)
165009 5/8 x 12 15.9 x 305 1.59 Jaw & Eye 16.0 20.1 89 33.3 838 501 877 541 44.4 22.3 99 304 1.64
160058 1-3/4 x 18 44.5 x 457 12.7 Jaw & Eye 44.5 66 239 86 1407 949 1518 1061 117 60.4 254 457 24.4
165010 1-3/4 x 24 44.5 x 610 12.7 Jaw & Eye 44.5 66 239 86 1711 1102 1823 1214 117 60.4 254 609 27.5
Other sizes available
WWW.BULLIVANTS.COM 131
05 -
HA
RD
WA
RE
Wire Rope TerminationsWedge SocketsWedge - type sockets are used in lifting, pulling, tensioning and staying systems as a simple mechanical connection to steel wire ropes, especially where steel wire ropes may require shortening. One end of the wedge type socket is able to clamp a rope with a
The wedge - type socket is designed for use on wire ropes up to and including 1770 grade wire with a wire rope core, however higher grade wire rope may be used, provided it meets the intent of this Standard.Metal or Spelter Sockets - Open and ClosedThe load is transferred between the rope and the socket forging or casting by means of adhesion between the rope wires and the metal or resin used in the socket bowl and subsequent wedging action provided by the bond between the rope’s wires and the metal or resin in the socket. Care should be taken to follow the correct socketing procedure. Properly applied poured socket attachments will withstand the actual breaking force of the wire rope.
SocketsCrosby S-501 Open Swage Sockets: Unit of Measure - Each
• Forged from special bar quality carbon steel, suitable for cold forming.
100% based on the catalogue strength of wire rope. • Hardness controlled by spheroidize annealing.
fractures (as per directions in National Swaging Brochure). • U.S. Patent 5,152,630 and foreign equivalents.
OR
DER
CO
DE
Rope Size*
Wei
ght E
ach
(kg)(mm) (in.)
160720 6 1/4 0.24
160721 8 5-16 0.51
160722 9-10 3/8 0.59
160723 11-12 7/16 0.94
160724 13 1/2 0.94
160725 14 9/16 2.12
160418 16 5/8 2.05
160403 18-20 3/4 3.62
160406 22 7/8 5.23
160726 24-26 1 8.07
160727 28 1-1/8 11.5
160728 32 1-1/4 16.1
160729 34-36 1-3/8 19.8
160730 38-40 1-1/2 26.5
160731 44 1-3/4 40.3
160732 48-52 2 66
Crosby S-502 Closed Swage Sockets: Unit of Measure - Each
• Forged from special bar quality carbon steel, suitable for cold forming.
100% based on the catalogue strength of wire rope. • Hardness controlled by spheroidize annealing.
fractures (as per directions in National Swaging Brochure). • U.S. Patent 5,152,630 and foreign equivalents.
OR
DER
CO
DE
Rope Size*
Wei
ght E
ach
(kg)(mm) (in.)
160733 6 1/4 0.15
160734 8 5/16 0.34
160735 9-10 3/8 0.33
160736 11-12 7/16 0.64
160737 13 1/2 0.64
160738 14 9/16 1.32
160739 16 5/8 1.29
160740 18-20 3/4 2.27
160741 22 7/8 3.08
160742 24-26 1 4.72
160678 28 1-1/8 6.72
160743 32 1-1/4 9.78
160744 34-36 1-3/8 12.9
160398 38-40 1-1/2 17.3
160399 44 1-3/4 23.1
160677 48-52 2 40.5
05 -
HA
RD
WA
RE
1300 722 999132
Crosby G-416 Open Spelter Sockets: Unit of Measure - Each
• Forged Steel Sockets thru 38 mm, cast alloy steel 40mm - 102mm.
of 100%, based on the catalogue strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope.
OR
DER
CO
DE Rope Dia.
Stru
ctur
al S
tran
d D
ia. (
mm
)
Ulti
mat
e Lo
ad (t
)
Wei
ght E
ach
(kg)
(mm) (in.)
160745 6-7 1/4 - 4.50 0.50
160746 8-10 5/16 - 3/8 - 12.0 0.59
160478 11-13 7/16 - 1/2 - 20.0 1.02
160480 14-16 9/16 - 5/8 12-13 27.0 1.63
160747 18 3/4 14-16 43.0 2.64
160487 20-22 7/8 18-19 55.0 4.38
160748 24-26 1 20-22 78.0 7.03
160492 28-30 1 - 1/8 24-26 92.0 9.75
160495 32-35 1 - 1/4 - 1-3/8 28 136 14.1
160749 38 1 - 1/2 30-32 170 21.4
160750 *40 - 42 * 1 - 5/8 33-35 188 24.9
160751 *44 - 48 *1 - 3/4 - 1-7/8 36-40 268 37.2
160752 *50 - 54 *2 - 2 - 1/8 42-45 291 59
160753 *56 - 60 *2 - 1/4 - 2 - 3/8 46-48 360 76
160754 * 64 - 67 *2 - 1/2 - 2-5/8 50-54 424 114
160755 *70 - 73 *2 - 3/4 - 2 - 7/8 56-62 511 143
160756 *75 - 80 *3 - 3 - 1/8 64-67 563 172
Crosby G-417 Closed Speltor Sockets: Unit of Measure - Each
• Forged Steel Sockets thru 38 mm, cast alloy steel 40mm - 100mm.
of 100%, based on the catalogue strength of wire rope. Ratings are based on the recommended use with 6 x 7, 6 x 19 or 6 x 37, IPS or XIP (EIP) , XXIP (EEIP), RRL, FC or IWRC wire rope.
OR
DER
CO
DE Rope Dia.
Stru
ctur
al S
tran
d D
ia.(m
m)
Ulti
mat
e Lo
ad (t
)
Wei
ght E
ach
(kg)
(mm) (in.)
160757 6 - 7 1/4 - 4.50 116
160465 8 - 10 5/16 - 3/8 - 12.0 0.34
160466 11 - 13 7/16 - 1/2 - 20.0 0.68
160758 14 - 16 9/16 - 5/8 12-13 30.8 1.13
160467 18 3/4 14-16 43.5 1.92
160759 20 - 22 7/8 18-19 65.3 3.28
160760 24 - 26 1 20-22 81.6 4.76
160761 28 - 30 1 - 1/8 24-26 100 6.46
160762 32 - 35 1 - 1/4 - 1 - 3/8 28 136 8.95
160763 38 1 - 1/2 30-32 170 13.24
160764 †40 - 42 †1 - 5/8 33-35 188 16.32
160765 †44 - 48 †1 - 3/4 - 1 - 7/8 36-40 268 25.96
160766 †50 - 54 †2 - 2 - 1/8 42-45 309 35.83
160767 †56 - 60 †2 - 1/4 - 2 - 3/8 46-48 360 47.62
160768 †64 - 67 †2 - 1/2 - 2 - 5/8 50-54 424 63.50
160769 †70 - 73 †2 - 3/4 - 2 - 7/8 56-62 549 99.79
160770 †75 - 80 †3 - 3 - 1/8 64-67 656 125
WWW.BULLIVANTS.COM 133
05 -
HA
RD
WA
RE
Crosby S-421T Terminator Wedge Sockets: Unit of Measure - Each
80% based on the catalogue strength of XXIP wire rope. • Crosby products meet or exceed all requirements of
factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide
• Individually magnetic particle inspected. • Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. • Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “Punch out” of the wedge. • Eliminates the need for an extra piece of rope, and is easily installed. • The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to fatigue. • The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse. • Utilises standard Crosby Red-U-Bolt® wire rope clip. • The 9-10mm thru 30-32mm standard S-421 wedge
wedge. • Available with Bolt, Nut, and Cotter Pin. • U.S. patent 5,553,360, Canada patent 2,217,004 and foreign equivalents.
OR
DER
CO
DE
Wire Rope Dia.
(mm) (in.)
160443 9 - 10 3/8
160446 11 - 13 1/2
160449 14 - 16 5/8
160451 18 - 19 3/4
160771 20 - 22 7/8
160463 24 - 26 1
160772 28 1-1/8
160773 30 - 32 1-1/4
PWB Forged Open Swage Socket, with Round Pin: Unit of Measure - Each
• Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing. • When correctly assembled Swage socket terminations
strength of wire rope. • Recommended for use with 6 x 19, 6 x 37 and IWRC wire rope and are approved for use with galvanized bridge rope. • All slings swaged with sockets shall be proof loaded in accordance with AS1666.1/2009
OR
DER
CO
DE
Fini
sh
Rope Size
Max
Afte
r Sw
age
(mm
)
Net
Wei
ght
(kg)
PWB
Par
t No.
(mm) (in.)
160879 Self Colour 6-7 1/4 12 0.2 46812
160880 Self Colour 8 5/16 18 0.7 46813
160881 Self Colour 9-10 3/8 18 0.6 46814
160882 Self Colour 11-12 7/16 23 1.2 46818
160883 Self Colour 13 ½ 23 0.9 46819
160884 Self Colour 14-15 9/16 30 2.1 46820
160885 Self Colour 16 5/8 30 2.1 46821
160886 Self Colour 18-20 ¾ 36 3.8 46822
160887 Self Colour 22-23 7/8 40 5.4 46823
160387 Self Colour 24-25 1 46 8.8 46824
160888 Self Colour 28 1-1/8 52 12.6 46826
160889 Self Colour 32 1-1/4 59 17.2 46827
160890 Self Colour 36 1-3/8 65 20.8 46828
160891 Self Colour 38 1-1/2 72 26.5 46829
160892 Self Colour 45 1-3/4 78 40.3 43830
160893 Self Colour 50 2 91 66.4 46831
160894 Galvanised 6-7 1/4 12 0.2 46796
160895 Galvanised 8 5/16 18 0.7 46797
160896 Galvanised 9-10 3/8 18 0.6 46798
160897 Galvanised 11-12 7/16 23 1.2 46799
160898 Galvanised 13 ½ 23 0.9 46800
160899 Galvanised 14-15 9/16 30 2.1 46801
160900 Galvanised 16 5/8 30 2.1 46802
160901 Galvanised 18-20 ¾ 36 3.8 46803
160902 Galvanised 22-23 7/8 40 5.4 46804
160903 Galvanised 24-25 1 46 8.8 46805
160904 Galvanised 28 1-1/8 52 12.6 46806
160905 Galvanised 32 1-1/4 59 17.2 46807
160906 Galvanised 36 1-3/8 65 20.8 46808
160907 Galvanised 38 1-1/2 72 26.5 46809
160908 Galvanised 45 1-3/4 78 40.3 46810
160909 Galvanised 50 2 91 66.4 46811
*Distributed by PWB Anchor
05 -
HA
RD
WA
RE
1300 722 999134
PWB Forged Closed Swage Wire Rope Socket (Self Colour): Unit of Measure - Each • Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing.
rating of 100% based on the catalogue strength of wire rope. • Recommended for use with 6 x 19, 6 x 37 and IWRC wire rope and are approved for use with galvanized bridge rope. • All slings swaged with sockets shall be proof loaded in accordance with AS1666.1/2009
OR
DER
CO
DE
Rope Size
Max
Afte
r Sw
age
(mm
)
Net
Wei
ght
(kg)
PWB
Par
t No.
(mm) (in.)
160910 6-7 1/4 12 0.2 46832
160911 8 5/16 18 0.3 46833
160912 9-10 3/8 18 0.3 46834
160913 11-12 7/16 23 0.7 46835
160914 13 1/2 23 0.6 46836
160915 14-15 9/16 30 1.4 46837
160916 16 5/8 30 1.3 46838
160917 18-20 3/4 36 2.2 46839
160394 22-23 7/8 39 3.1 46840
160918 24-25 1 46 4.8 46841
160919 28 1-1/8 52 6.7 46842
160920 32 1-1/4 58 10.1 46843
160921 36 1-3/8 65 12.9 46844
160922 38 1-1/2 71 16.9 46845
160923 45 1-3/4 78 24.3 46846
160924 50 2 90 40.5 46847
PWB Forged Closed Spelter Wire Rope Socket (Self Colour): Unit of Measure - Each • Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing.
rating of 100% based on the catalogue strength of wire rope. • Socket size 1/4” thru 3/4” use one groove, 7/8” thru 1-1/2” use 2 grooves • In accordance with AS1666.1/2009 all assembly slings with poured Spellter Sockets, shall be proof loaded
OR
DER
CO
DE
Rope Size Structural Strand Dia.
Net
Wei
ght
(kg)
PWB
Par
t No.
(mm) (in.) (mm) (in.)
160925 6-7 1/4 - - 0.3 46770
160926 8-10 5/16-3/8 - - 0.4 46771
160927 11-13 7/16-1/2 - - 1.5 46772
160928 14-16 9/16-5/8 13 1/2 2.6 46773
160929 18-20 3/4 14-16 9/16-5/8 4.3 46774
160930 22-23 7/8 18-20 1 1/16 – 3/4 7.9 46775
160932 28-30 1 1/8 24-25 15/16-1 15.2 46780
160933 32-35 1 ¼-1 3/8 26-28 1 1/16- 1 1/8 22.7 46781
160934 36-39 1 1/2 30-32 1 3/16 – 1 1/4 30.9 46782
*Distributed by PWB Anchor
*Distributed by PWB Anchor
WWW.BULLIVANTS.COM 135
05 -
HA
RD
WA
RE
PWB Forged Open Spelter Wire Rope Socket, with round pin: Unit of Measure - Each • Forged from special bar quality carbon steel with superior hardness controlled by spheroidize annealing.
rating of 100% based on the catalogue strength of wire rope. • Socket size 1/4” thru 3/4” use one groove, 7/8” thru 1-1/2” use 2 grooves • In accordance with AS 1666.1/2009 all assembly slings with poured Spelter Sockets, shall be proof loaded
OR
DER
CO
DE
Rope Size Structural Strand Dia.
Net
Wei
ght
(kg)
PWB
Par
t No.
(mm) (in.) (mm) (in.)
160935 6-7 1/4 - - 0.5 46783
160936 8-10 5/16-3/8 - - 0.6 46785
160937 11-13 7/16-1/2 - - 1.1 46786
160938 14-16 9/16-5/8 13 1/2 1.7 46787
160939 18-20 3/4 14-16 9/16-5/8 2.6 46788
160940 22-23 7/8 18-20 11/16-3/4 4.7 46789
160941 24-26 1 22-23 13/16-7/8 7.4 46791
160942 28-30 1 1/8 24-25 15/16-1 10.0 46793
160943 32-35 1 1/4-1 3/8 26-28 1 1/16-1 1/8 14.9 46794
160944 36-39 1 1/2 30-32 1 3/16-1 1/4 20.8 46795
PWB Steel Swage Sleeve (Zinc Plated): Unit of Measure - Each
OR
DER
CO
DE
Rop
e Si
ze
(in.)
Max
Afte
r Sw
age
Dim
. (in
.)
Net
Wei
ght
(Lbs
)
PWB
Par
t No.
164465 ¼ 0.57 0.05 46848
164466 5/16 0.75 0.14 46849
164467 3/8 0.75 0.14 46850
164468 7/16 1.01 0.3 46851
164469 ½ 1.01 0.4 46852
164470 5/8 1.24 0.6 46854
164471 ¾ 1.46 0.9 46855
164472 7/8 1.68 1.3 46856
164473 1 1.93 2.0 46857
164474 1-1/8 2.13 2.6 46858
164475 1-1/4 1.32 3.6 46859
164476 1-3/8 2.52 4.2 46860
164477 1-1/2 2.71 5.0 46861
164478 1-3/4 3.10 8.0 46862
164479 2 3.56 11.3 46863
164480 2-1/4 4.12 19.4 46864
164481 2-1/2 4.50 23.5 46865
164482 2-3/4 4.70 28.0 46866
164483 3 4.96 29.4 46867
164484 3-1/2 5.77 46.4 46868
164485 3-3/4 6.23 55.0 46869
164486 4 6.69 68.0 46870
*Distributed by PWB Anchor
*Distributed by PWB Anchor
05 -
HA
RD
WA
RE
1300 722 999136
Wire Rope GripsWire Rope Grips AS2076: Unit of Measure - Each
Not for lifting applications.
OR
DER
CO
DE
Size
(mm
)
A (m
m)
B (m
m)
D (m
m)
G (m
m)
Wei
ght (
kg)
160002 8 M8 41 22 8 0.06
160003 10 M10 49 27 10 0.12
160004 12 M12 59 32 12 0.21
160010 13-14 M14 70 38 14 0.23
160005 16 M14 77 41 14 0.48
160011 18-19 M16 89 47 16 0.53
160007 22 M20 108 58 20 0.58
160008 26 M20 117 61 20 1.12
160012 28 M22 127 66 22 1.41
160013 32 M22 136 70 22 2.07
Other sizes up to 75mm are available upon request.
Commercial Grade Wire Rope Grips: Unit of Measure - EachNot for lifting applications.
OR
DER
CO
DE
Rop
e Si
ze
(mm
)
OR
DER
CO
DE
Rop
e Si
ze
(mm
)
160041 3 160036 12
160029 3/4 160042 14
160030 5 160037 16
160031 6 160043 20
160032 8 160044 22
160035 10 160045 25
Other sizes available.
Double Throat Grips: Unit of Measure - Each
OR
DER
CO
DE
Rop
e D
ia.
(mm
)
Bea
ring
Surf
ace
(mm
)
Wid
th (m
m)
Dia
. of “
U”
Bol
t (m
m)
160009 10/12 40 52 10
160016 16 46 58 10
ThimblesThimbles are used at the ends of wire rope to reinforce the eye and obviate damage and wear to the wire rope from any connected lifting tackle or other connection.Types of ThimblesWire Rope Thimbles are made from mild steel and are hot dipped galvanised with blue paint on the tips in accordance with AS1138.Commercial Grade Thimbles are not manufactured to any standard and are made from light gauge material. Normally used in light applications and supplied in electro galvanised
Stainless Steel Thimbles are not manufactured to any standard and are usually used with stainless steel wire rope when corrosion could be a cause for concern.Solid Thimbles are used for loads that are secured by a bolt or pin and can be drilled (bored) out to match that pin or bolt, refer to AS1138.Wire Rope Thimbles - AS1138: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
A (m
m)
B (m
m)
F (m
m)
G (m
m)
H (m
m)
J (m
m)
160315 8 20 31 12 3.6 9 4.4
160316 10 25 38 15 4.5 11 5.5
160317 12 30 46 18 5.4 13 6.6
160333 14 35 54 21 6.3 15 7.7
160318 16 40 61 24 7.2 18 8.8
160319 20 50 76 31 9 22 11
160321 22 55 84 34 9.9 24 12
165054 24 60 92 37 11 26 13
160337 26 65 99 40 12 28 14
160323 28 70 107 43 13 30 15
160324 32 80 122 49 15 35 24
160327 36 90 137 55 17 39 27
160340 44 110 168 68 20 48 33
160329 52 130 198 80 24 56 39
WWW.BULLIVANTS.COM 137
05 -
HA
RD
WA
RE
Crosby G-414 Thimbles: Unit of Measure - Each • Available in Hot Dip galvanized or Stainless Steel (Type 304). • Stainless steel recommended for more corrosive environments where greater protection is required. • Greater protection against wear and deformation of the wire rope eye. • Longer service life.
OR
DER
CO
DE
Rope Dia.
Wei
ght P
er
100
(kg)
Dimensions (mm)
(mm) (in.) A B C D E F G H
160774 *6-7 1/4 2.95 55.5 41.4 38.1 22.4 11.2 7.10 1.50 5.85
160775 *8 5/16 5.35 63.5 47.8 46.0 26.9 14.0 8.65 2.05 7.10
160776 *9-10 3/8 9.80 73.0 54.0 54.0 28.7 16.8 10.4 2.80 8.65
160777 11-12 7/16 15.7 82.5 60.5 60.5 31.8 18.8 11.9 3.30 9.65
160778 *13-15 1/2 - 9/16 23.1 92.0 70.0 70.0 38.1 23.4 13.5 3.55 10.4
160779 *16 5/8 34.3 108 82.5 79.5 44.5 26.2 16.8 4.05 12.7
160780 *18-20 3/4 72 127 95.5 96.5 51.0 33.0 19.8 5.60 16.8
160781 22 7/8 81 140 108 108 57.0 37.3 23.9 5.60 19.1
160782 24-26 1 142 156 114 125 63.5 44.5 26.9 6.35 22.4
160783 28-32 1 - 1/8 - 1-1/4 181 178 130 149 73.0 47.8 33.3 6.35 28.7
160784 32-35 1 - 1/4 - 1-3/8 402 230 165 173 89.0 57.2 36.6 9.65 28.7
160785 35-38 1 - 3/8 - 1-1/2 587 229 159 181 89.0 66.5 39.6 12.7 28.7
160786 40 1 - 5/8 771 286 203 207 102 76.2 43.7 12.7 35.1
160787 44 1 - 3/4 805 310 229 216 114 77.7 46.7 12.7 33.3
160788 48-52 1 - 7/8 - 2 1259 384 305 264 152 85.9 53.0 12.7 38.1
160789 56 2 - 1/4 1792 435 356 302 178 98.6 60.5 16.0 41.4
Solid Heart Thimbles: Unit of Measure - Each
OR
DER
CO
DE
Rop
e D
ia.
(mm
)
A (m
m)
B (m
m)
C (m
m)
D (m
m)
E (m
m)
Wei
ght (
kg)
160330 16 96 71 27 52 17 1
160331 20 117 84 29 63 22 1.05
160364 28 170 125 44 90 30 4.2
Other sizes available.
Commercial Grade Galvanised Thimbles: Unit of Measure - Each
Ord
er C
ode
Rop
e Si
ze
(mm
)
160380 3
160374 5
160373 6
160375 8
160376 10
160377 12
160382 16
Other sizes available.
05 -
HA
RD
WA
RE
1300 722 999138
FerrulesAluminium Ferrules DIN Grade 3093: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
160233 1.5
160198 2
160199 2.5
160173 3
160174 3.5
160175 4
160237 4.5
160176 5
160164 6
160200 6.5
160177 7
160165 8
160166 9
160167 10
160178 11
160168 12
160179 13
160169 14
160170 16
160171 18
160180 20
160172 22
160181 24
160182 26
160183 28
160184 30
160243 32
160185 34
160201 38
160202 40
160203 42
160245 44
160204 46
160205 54
Copper Ferrules DIN Grade 3093: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
160207 1.5
160186 2
160208 2.5
160209 3
160187 3.5
160188 4
160211 4.5
160189 5
160190 6
160191 6.5
160212 7
160213 8
160192 9
160193 10
160214 11
160194 12
160215 13
160195 14
160216 16
160217 18
160218 22
Steel Ferrules: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
165040 16
160282 18
160285 22
160228 26
160229 32
Australoc Ferrules – Grade S505: Unit of Measure - Each
OR
DER
CO
DE
Size
(in.
)
160226 3/8
160196 1/2
160197 5/8
160227 3/4
160289 1
160290 1-1/8
160293 1-3/4
160294 2
Other sizes available.
Hand Swaged Copper Ferrules: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
160219 1.6
160221 3.2
160223 4
160225 4.8
Other sizes available.
Hand Swaged Nickel Plated Copper Ferrules: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
Bra
nd
160220 3 Bridge & Co
160222 3.2 Dolphin Marine
160224 4 Dolphin Marine
160260 4 Bridge & Co
Hand Swaged Alloy Ferrules: Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)160206 4
160249 4.8
160250 5
160251 6
160252 6.4
WWW.BULLIVANTS.COM 139
05 -
HA
RD
WA
RE
Crosby S-409 Swage Buttons: Unit of Measure - Each
on the catalog strength of wire rope. • Special processed, low carbon steel. • COLD TUFF® for better swageability.
(as per directions in National Swaging Brochure).
OR
DER
CO
DE
Size
No.
Rope Size
Wei
ght P
er
100
(kg)
Before Swage Dimensions (mm)
After Swage Dimensions (mm)
(mm) (in.) A B C D Max. After Swage Dimensions E Length*
160790 1 SB 3 1/8 0.91 10.7 12.7 3.56 10.2 15.5
160791 3 SB 5 3/16 1.81 14.2 17.8 5.08 13.2 21.3
160792 5 SB 6-7 1/4 3.63 17.3 26.9 7.87 14.7 33.5
160793 7 SB 8 5/16 7.26 22.4 28.7 9.14 19.6 33.8
160794 8 SB 9-10 3/8 6.80 22.4 37.6 10.7 19.6 42.9
160795 9 SB 11 7/16 13.6 28.7 41.4 12.2 26.2 49.3
160796 10 SB 13 1/2 22.7 33.3 48.0 14.0 29.5 55.1
160797 11 SB 14 9/16 31.8 36.6 51.3 15.5 32.8 61.2
160798 12 SB 16 5/8 45.4 39.6 61.5 17.0 36.1 73.4
160799 13 SB 18-20 3/4 59 42.7 69.6 20.3 39.6 82.6
160800 14 SB 22 7/8 100 50.8 83.1 23.9 45.7 98.0
160801 15 SB 25-26 1 141 57.2 93.2 26.9 52.1 111
160802 16 SB 28-29 1-1/8 204 65.0 103 30.2 58.4 122
160803 17 SB 31-32 1-1/4 295 71.4 116 33.8 65.0 138
* NOTE: Length is measured from outside end of termination.
05 -
HA
RD
WA
RE
1300 722 999140
NCG Cable StockingsCable stockings are available in a variety of designs to suit different applications including cable hauling, load restraint, cable splicing (joining), re-roping cranes and airline or hydraulic hose restraint.Our cable stockings are serial numbered, stamped with
plastic adhesive to reduce manual handling risks.Fitting Precautions1. Always ensure the entire plaited length of the stocking is in contact with the cable to be hauled.2. Ease out any ‘bubbles’ or slack in the stocking to ensure maximum contact of grip to cable.3. Always fasten the mouth end of the stocking to the cable by means of tie wire or similar. This will guard against accidental release, especially in the case of a reverse haul.4. Always tape over the fastening at the mouth end to ensure a smooth transition from stocking to cable.Variations • Any sizes outside this range available on request • 2070 Galvanised Strand OR 316 Stainless Steel Strand • Copper OR Stainless Steel Ferrules • Soft Eye OR Thimbles
Standard Cable StockingsLace Up: Unit of Measure - Each
cable or rope at any position, and secured with a lace. This type
the end of the cable.
OR
DER
CO
DE
To S
uit D
iam
eter
of
Cab
le (m
m)
165439 14-19
165441 19-28
165443 28-40
165445 40-55
165446 55-75
165447 75-95
165448 95-120
Single Eye “Cap” Style (Tubular): Unit of Measure - Each
This is the most commonly used type of cable stocking. It is
OR
DER
CO
DE
To S
uit D
iam
eter
of
Cab
le (m
m)
165130 14-19
165131 19-28
165189 28-40
165196 40-55
165200 55-75
165209 75-95
165212 95-120
Offset Eye (Tubular): Unit of Measure - Each
This design allows the cable to pass through the stocking so it
to support electrical and hydraulic and other hoses in marine, industrial and mining applications. Also used for strain relief on trailing supply lines.
OR
DER
CO
DE
To S
uit D
iam
eter
of
Cab
le (m
m)
165336 14-19
165337 19-28
165190 28-40
165338 40-55
165339 55-75
165340 75-95
165341 95-120
WWW.BULLIVANTS.COM 141
05 -
HA
RD
WA
RE
Double Eye (Tubular): Unit of Measure - Each
This design has similar properties to the offset eye in that it can
When hauling with only one eye the breaking strength is greatly reduced.
OR
DER
CO
DE
To S
uit D
iam
eter
of
Cab
le (m
m)
165432 19-28
165433 28-40
165434 40-55
165201 55-75
165435 75-95
165436 95-120
Specialty StockingsHeavy Duty (Tubular): Unit of Measure - Each
Stockings are available for added tensile strength and durability.
OR
DER
CO
DE
To S
uit D
iam
eter
of
Cab
le (m
m)
165437 10-14
165438 14-19
165440 19-28
165442 28-40
165444 40-55
Open Both Ends (Tubular): Unit of Measure - Each
Stockings are a tubular design with no eye which allow a cable to be spliced or joined.
OR
DER
CO
DE
To S
uit D
iam
eter
of
Cab
le (m
m)
165408 10-14
165409 14-19
165178 19-28
165410 28-40
165411 40-55
Non Conductive (Tubular): Unit of Measure - Each
Nylon stockings are available to suit Low and High Voltage Aerial Bundled Conductor overhead lines.
OR
DER
CO
DE
To S
uit D
iam
eter
of
Cab
le (m
m)
165412 2 x 35mm² LV ABC
165413 2 x 50mm² LV ABC
165414 2 x 95mm² LV ABC
165415 3 x 120mm² HV ABC
165416 3 x 150mm² HV ABC
05 -
HA
RD
WA
RE
1300 722 999142
Heavy Duty Graded Weave (Tubular): Unit of Measure - Each
bare or insulated conductor lines. They utilise extra material for higher breaking strengths at smaller cable diameters, and extra length for assured grip onto bare metal conductor.
OR
DER
CO
DE
To S
uit D
iam
eter
of
Cab
le (m
m)
165417 8-11
165418 10-15
165419 15-21
165420 20-29
165421 27-35
165422 32-37
Hose Restraints (Tubular): Unit of Measure - Each
These are double eyed cable stockings with a protective adhesive sheath over the “legs” of the stocking. They are designed to contain a pressurised hose in the event of hose connection failure. Hose Restraints are also available in custom lengths with double eyes at both ends to secure both ends and the entirety of a hose.
OR
DER
CO
DE
To S
uit D
iam
eter
of
Cab
le (m
m)
165423 19-28
165425 28-40
165426 40-50
165427 50-60
165428 60-70
165429 70-85
165430 85-100
165431 100-120
WWW.BULLIVANTS.COM 143
05 -
HA
RD
WA
RE
Sheave BlocksBullivants can supply a broad range of blocks including Single, Snatch, Double, Treble and the world renown Crosby range of pulley blocks, up to 50 tonne WLL. Types and SelectionBlocks are used in a variety of applications from crane hoist and
and many more.
PWB Anchor Manually Operated Sheave BlocksAn extensive range of manually operated Snatch and Sheave
Wire Rope. With fully interchangeable sheaves and supplied with either drop forged swivel hooks or eyes, this range comes with beckets standard on single and double blocks. Bronze Bushes and safety latches are also standard across the range.PWB Anchor Snatch Blocks - Wire Rope: Unit of Measure - Each
OR
DER
CO
DE
Shea
ve D
ia.
(mm
)
Rop
e Si
ze
(mm
)
Cap
acity
(kg)
Hea
d Fi
tting
PWB
Par
t No.
.
164078 63 5.0 250 Hook 45623
164081 75 6.0 250 Hook 45640
164090 100 8.0 500 Hook 45673
164099 125 10.0 1000 Hook 45707
164009 150 12.0 1000 Hook 45724
164010 200 16.0 2000 Hook 45758
165016 63 5.0 250 Eye 45615
164079 75 6.0 250 Eye 45632
164088 100 8.0 500 Eye 45665
164097 125 10.0 1000 Eye 45699
164008 150 12.0 1000 Eye 45716
164111 200 16.0 2000 Eye 45750
PWB Anchor Snatch Blocks - Manilla Rope: Unit of Measure - Each
OR
DER
CO
DE
Shea
ve D
ia.
(mm
)
Rop
e Si
ze
(mm
)
Cap
acity
(kg)
Hea
d Fi
tting
PWB
Par
t No.
.
164448 63 10.0 250 Hook 45622
164080 75 12.0 250 Hook 45639
164089 100 16.0 500 Hook 45672
164098 125 20.0 1000 Hook 45706
164102 150 24.0 1000 Hook 45723
164454 200 32.0 2000 Hook 45757
164455 63 10.0 250 Eye 45614
164456 75 12.0 250 Eye 45631
164087 100 16.0 500 Eye 45664
164457 125 20.0 1000 Eye 45698
164458 150 24.0 1000 Eye 45715
164459 200 32.0 2000 Eye 45749
PWB Anchor Single Sheave Blocks - Wire Rope: Unit of Measure - Each
OR
DER
CO
DE
Shea
ve D
ia.
(mm
)
Rop
e Si
ze
(mm
)
Cap
acity
(kg)
Hea
d Fi
tting
PWB
Par
t No.
Wei
ght (
kg)
164021 63 5.0 250 Hook 45624 1.0
164025 75 6.0 250 Hook 45641 1.0
164034 100 8.0 500 Hook 45674 2.3
164043 125 10.0 1000 Hook 45708 4.2
164049 150 12.0 1000 Hook 45725 6.7
164054 200 16.0 2000 Hook 45759 13.8
164019 63 5.0 250 Eye 45616 0.8
164023 75 6.0 250 Eye 45633 1.0
164032 100 8.0 500 Eye 45666 2.1
164449 125 10.0 1000 Eye 45700 3.8
164450 150 12.0 1000 Eye 45717 6.1
164451 200 16.0 2000 Eye 45751 13.6
PWB Anchor Single Sheave Blocks – Manilla Rope: Unit of Measure - Each
05 -
HA
RD
WA
RE
1300 722 999144
OR
DER
CO
DE
Shea
ve D
ia.
(mm
)
Rop
e Si
ze
(mm
)
Cap
acity
(kg)
Hea
d Fi
tting
PWB
Par
t No.
164020 63 10 250 Hook 45621
164024 75 12 250 Hook 45638
164033 100 16 500 Hook 45671
164042 125 20 1000 Hook 45705
164460 150 24 1000 Hook 45722
203749 200 32 2000 Hook 45756
164461 63 10 250 Eye 45613
164462 75 12 250 Eye 45630
164031 100 16 500 Eye 45663
164463 125 20 1000 Eye 45697
164464 150 24 1000 Eye 45714
164053 200 32 2000 Eye 45748
PWB Anchor Double Sheave Blocks – Wire Rope: Unit of Measure - Each
OR
DER
CO
DE
Shea
ve D
ia.
(mm
)
Rop
e Si
ze
(mm
)
Cap
acity
(kg)
Hea
d Fi
tting
PWB
Par
t No.
164018 63 5 250 Hook 45620
164487 75 6 250 Hook 45637
164488 100 8 750 Hook 45670
164041 125 10 1000 Hook 45704
164048 150 12 1500 Hook 45721
164489 200 16 3000 Hook 45755
164490 63 5 250 Eye 45612
164491 75 6 250 Eye 45629
164492 100 8 750 Eye 45662
164493 125 10 1000 Eye 45696
164047 150 12 1500 Eye 45713
164494 200 16 3000 Eye 45747
PWB Anchor Double Sheave Blocks – Manilla Rope: Unit of Measure - Each
OR
DER
CO
DE
Shea
ve D
ia.
(mm
)
Rop
e Si
ze
(mm
)
Cap
acity
(kg)
Hea
d Fi
tting
PWB
Par
t No.
164017 63 10 250 Hook 45619
164022 75 12 250 Hook 45636
164495 100 16 750 Hook 45669
164040 125 20 1000 Hook 45703
164496 150 24 1500 Hook 45720
164497 63 10 250 Eye 45611
164498 75 12 250 Eye 45628
164499 100 16 750 Eye 45661
164500 125 20 1000 Eye 45695
164501 150 24 1500 Eye 45712
164502 200 32 3000 Eye 45746
PWB Anchor Treble Sheave Blocks – Wire Rope: Unit of Measure - Each
OR
DER
CO
DE
Shea
ve D
ia.
(mm
)
Rop
e Si
ze
(mm
)
Cap
acity
(kg)
Hea
d Fi
tting
PWB
Par
t No.
164503 63 5 250 Hook 45626
164504 75 6 250 Hook 45643
164505 100 8 750 Hook 45676
164506 125 10 1000 Hook 45710
164507 150 12 1500 Hook 45727
164508 200 16 4000 Hook 45761
164509 75 6 250 Eye 45635
164510 100 8 750 Eye 45668
164511 125 10 1000 Eye 45702
164512 150 12 1500 Eye 45719
PWB Anchor Treble Sheave Blocks – Manilla Rope:
WWW.BULLIVANTS.COM 145
05 -
HA
RD
WA
RE
Unit of Measure - Each
OR
DER
CO
DE
Shea
ve D
ia.
(mm
)
Rop
e Si
ze
(mm
)
Cap
acity
(kg)
Hea
d Fi
tting
PWB
Par
t No.
164513 63 10 250 Hook 45625
164026 75 12 250 Hook 45642
164514 100 16 750 Hook 45675
164515 125 20 1000 Hook 45709
164516 150 24 1500 Hook 45726
164517 75 12 250 Eye 45634
164518 100 16 750 Eye 45667
164519 125 20 1000 Eye 45701
164520 150 24 1500 Eye 45718
PWB Anchor Trawl Blocks: Unit of Measure - Each
• Manufactured with the highest quality steel available • Corrosive resistant for increased block life in a salt water environment
longer lock life • Bearings are sealed for increased block life and performance • Each block is individually tested for maximum safety
OR
DER
CO
DE
Type
WLL
(ton
nes)
Shea
ve D
im.
(in.)
Rim
Th
ickn
ess
Net
Wei
ght
(kg)
PWB
Par
t No.
164521 Needle 5 6 2 ¾ 11.9 46732
164522 Tapered 10 8 2 7/8 19.7 46741
164523 Bronze Brushed 5 6 2 ¾ 14.2 46736
Crosby Snatch Blocks • Drop forged, heat treated swivel hook or swivel shackle. • Hook and shackle assemblies on 8” through 14” sizes can be interchanged. • Can be furnished with bronze bushings or roller bearings.
• 430 and 431 blocks have exclusive bolt retaining spring to assure no lost bolts. • Can be furnished with hook latch. • 8” and 10” models furnished with dual rated wireline sheaves. • Fatigue Rated. • All sizes are RFID EQUIPPED.Crosby 419 Snatch Blocks Unit of Measure - Each
OR
DER
CO
DE
Shea
ve D
ia.
(in.)
Bea
ring
Cod
e
Wire
Rop
e Si
ze (m
m)
WLL
(ton
nes)
*
Wei
ght E
ach
(kg.
)
165450 *3 BB 8-10 2 1.90
165342 **3 BB 8-10 2 1.81
165343 **4-1/2 BB 10-13 4 5.44
165344 6 BB 16-19 8 12.6
165345 6 RB 16-19 8 12.6
165346 8 BB 16-19 8 15.4
165347 8 RB 16-19 8 15.4
165348 10 BB 16-19 8 19.1
165349 10 RB 16-19 8 19.1
165350 12 BB 16 8 22.2
165351 12 RB 16 8 22.2
165352 12 BB 19 8 22.2
165353 12 RB 19 8 22.2
165354 14 BB 16 8 25.4
165355 14 RB 16 8 25.4
165356 14 BB 19 8 25.4
165357 14 RB 19 8 25.4
165358 16 BB 19 15 61
165359 16 RB 19 15 61
165360 16 BB 22 15 61
165361 16 RB 22 15 61
165362 18 BB 22 15 70
165363 18 RB 22 15 70
165364 18 BB 26 15 70
165365 18 RB 26 15 70
*Distributed by PWB Anchor
05 -
HA
RD
WA
RE
1300 722 999146
Crosby 431 Snatch Blocks: Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
*
Shea
ve D
ia.
(in.)
Bea
ring
Cod
e
Wire
Rop
e Si
ze (m
m)
Wei
ght E
ach
(kg.
)
165366 20 8 BB 26-28 39.5
165367 20 8 RB 26-28 39.5
165368 20 10 BB 26-28 45.8
165369 20 10 RB 26-28 45.8
165370 20 12 BB 26 52
165371 20 12 RB 26 52
165372 20 12 BB 28 52
165373 20 12 RB 28 52
165374 20 14 BB 26 61
165375 20 14 RB 26 61
165376 20 14 BB 28 61
165377 20 14 RB 28 61
165378 25 18 BB 26 118
165379 25 18 RB 26 118
165380 25 18 BB 28 118
165381 25 18 RB 28 118
165382 30 20 BB 28 181
165383 30 20 RB 28 181
165384 30 20 BB 32 181
165385 30 20 RB 32 181
165386 30 24 BB 28 215
165387 30 24 RB 28 215
165388 30 24 BB 32 215
165389 30 24 RB 32 215
Crosby M-491 Tower Derrick Hoist Block: Unit of Measure - Each
• 4, 8, 12 or 15 metric ton capacity • 10mm to 25mm wire line sizes
• 203mm and 254mm blocks furnished with dual rated wireline sheaves. • Forged steel swivels, tees, yokes and shackles are Quenched & Tempered. • Sheave lubrication through center pin for easy maintenance. • Design factor of 4 to 1 • All blocks 356mm and larger are furnished with McKissick®
• Recessed sideplate design reduces the gap between the sheave rim and the sideplate, allowing the sheave assembly to be captured in the block if loss of center pin occurs. • Sealed tapered roller bearings extend the life of the center pin and bearings, and allows for faster line speeds than recommended with standard snatch blocks.
• Suitable for hoisting personnel, contingent upon all employees, including the winch operator, being trained to follow any applicable Federal, local and industry standards. • Tugger/Derrick applications: API RP54 • Tower applications: OSHA directive CPL 2-1.36 • Holes through side plates are available for secondary block securement device.
ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide
• All sizes are RFID EQUIPPED.
OR
DER
CO
DE
WLL
(ton
nes)
*
Shea
ve D
ia.
(mm
)
Wire
Rop
e Si
ze (m
m)
Wei
ght E
ach
(kg.
)
165407 4 203 10 - 13 16
165390 8 254 10 - 13 25
165391 8 254 13 - 14 25
165392 12 254 13 - 14 25
165393 12 356 16 43
165394 12 356 19 43
165395 15 406 22 68
165396 15 406 25 48
*Ultimate Load is 4 times the Working Load Limit
WWW.BULLIVANTS.COM 147
05 -
HA
RD
WA
RE
Gunnebo Johnson Swivel Hook - Snatch Block Wire: Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
Shea
ve D
ia.
(mm
)
To S
uit W
ire
Size
(in.
)
Hea
d Fi
tting
Gun
nebo
Pa
rt N
o.
Wei
ght (
kg)
164075 4 100 3/8-1/2 Swivel Hook JSB04S04BS 7
Other sizes and capacities available.
Gunnebo Johnson Swivel Shackle - Snatch Block Wire: Unit of Measure - Each
OR
DER
CO
DE
Shea
ve D
ia.
(mm
)
To S
uit W
ire
Size
(in.
)
WLL
(ton
nes)
Hea
d Fi
tting
Gun
nebo
Pa
rt N
o.
Wei
ght (
kg)
164004 75 5/16-3/8 2 Swivel Shackle SB2S3BS 2.4
164005 100 3/8-1/2 4 Swivel Shackle SB4S4BS 6.8
164076 152 3/8-1/2 4 Swivel Shackle SB4S6BS 8.2
164006 150 5/8-3/4 8 Swivel Shackle SB8S6BS 13.2
164007 203 5/8-3/4 8 Swivel Shackle SB8S8BS 16.5
164441 250 3/4-7/8 12 Swivel Shackle SB12S10BS 30
164442 350 3/4-7/8 15 Swivel Shackle SB15S14BS 50
164443 400 1-1 1/8 20 Swivel Shackle SB22S16BS 80
164444 500 1 1/8-1 1/4 30 Swivel Shackle SB30S20BS 155
Other sizes and capacities available.
Grip Clip (R Clip): Unit of Measure - Each
OR
DER
CO
DE
Size
(mm
)
To s
uit S
haft
Size
(mm
)
160033 3 10-12
160034 4 12-22
Other sizes available.
HooksTypes and SelectionSwivel Crane hooks and Shank hooks are available in a standard range up to 25t with larger available. Are manufactured in accordance with AS3777.Swivel Alloy Hooks with Thrust Bearing & Seals: Unit of Measure - Each
Fitted with industrial thrust bearing to rotate under load and seals.Compact design for easy handling.
OR
DER
CO
DE
WLL
(ton
nes)
Eye
Size
(mm
)
Wei
ght (
kg)
164132 16 88 15.8
164133 18 105 16
Other sizes available.
Alloy Shank Hook with Latch: Unit of Measure - Each
OR
DER
CO
DE
WLL
(ton
nes)
Wei
ght (
kg)
121525 11 6.12
165030 15 8.16
Other sizes available.
Lynch Pin: Unit of Measure - Each
OR
DER
CO
DE
Pin
Dia
met
er
(mm
)
165046 4.5
165135 6
165136 8
165251 11
Other sizes available.