05-hlr9820 smu global data issue1.1

HUAWEI TECHNOLOGIES CO., LTD.

All rights reserved

www.huawei.com

Internal

OWF003202 HLR9820 SMU Global Data

Configuration

ISSUE 1.1

HUAWEI TECHNOLOGIES CO., LTD. All rights reserved

HLR global data should be configured at

SMU Client. It will be sent to HDU by

SMU Server.

Global data defines properties of MAP

layer and parameters of subscriber

service.


References

<Operation Manual - HLR9820 Data

Configuration>

Online help of SMU client


Upon completion of this course, you

will be able to:

Know the purpose of global data

configuration.

Understand the procedure to

configure global data and the

relationship between each step.


Chapter 1 Configuration for MAP ServiceChapter 1 Configuration for MAP Service

Chapter 2 Configuration for CFWChapter 2 Configuration for CFW

Chapter 3 Configuration for Other ServicesChapter 3 Configuration for Other Services

Chapter 4 ExampleChapter 4 Example



1.1 SET INTROFF1.1 SET INTROFF

1.2 SET MAPSERV1.2 SET MAPSERV

1.3 SET MAPCONF1.3 SET MAPCONF


MAP Data Configuration

Local HLR No.

Country Code

These two attributes should be consistent with what be

configured at SAU client using the command SET OFI.

SET INTROFF



CFNR Time

Delete Subscriber’s Location

Maximum Times of Call Forward

Support of USSD Function Value

Restriction FTN Length

SET MAPSERV



PLMN-SS when HLR insert subscriber data

PLMN-SS when HLR return MSRN

PLMN-SS when HLR return MSRN or forwarded-to number

These parameters define whether PLMN specific supplementary

service data is delivered when HLR insert subscriber data or send

routing information.

PLMN-SS Barring

It specifies which PLMN-SS is used to bar USSD. If

DELETE_PLMNSS is selected it means there is no way to bar

USSD.

SET MAPSERV



Message Waiting Information (MWI)

MWISUPP, Cancel SC, Repetition Times of ALERT_SC Fail

Call Forwarding (CFW)

Area Limitation, Number Structure Limitation

Support CFD when subscriber is international roaming

MAP Version

Any Time Interrogation (ATI)

Unstructured Supplementary Service (USSD)

SET MAPCONF



2.1 Basic Concepts2.1 Basic Concepts

2.2 CFW Check Configuration2.2 CFW Check Configuration

2.3 CFW Restriction Configuration2.3 CFW Restriction Configuration


2.1 Call Forwarding (CFW)

A — Calling subscriber

B — Forwarding subscriber or called subscriber,

the subscriber who register call forwarding

service

C — Forwarded to subscriber

For B, C number is Forwarded to Number (FTN)

For A, C number is Connected Line Number

CFB, CFNRc, CFNRy, CFU, CFD

A B C


2.1 Questions

What’s the function of CFW data configuration?

Validate FTN registered by subscriber

Standardize FTN

CC + Area code + PSTN numberPSTN

MSISDN CC + MSISDN number


2.2 CFW Check Configuration

ADD IMSIARC

IMSI, Area Code

ADD CALLEDNA

Called Number Prefix

Service Property (local, national, international, PLMN)

Information Flag, Entertainment Flag

ADD CNTRCD

ADD DAREA



IMSIARC CALLEDNA

00 — internationalCNTRCD

DAREA0 — national

1~9 local

PLMN prefix

NumberStandardization



Number Standardization

CC + Area code + PSTN numberPSTN

MSISDN CC + MSISDN number

SET INTROFF

ADD IMSIARC



Area Limitation - Check subscriber number and FTN

No limitation

In same state, compare the country code of B subscriber and FTN

In same area

Number Limitation

IMSIARC

PSTN

ISDNARC

Area Code of B

Check

Area Code of C



Number Structure Limitation

Check number structure of FTN

Area code without country code

Area code with county code

No limitation

Number Limitation



SET DEFNCS

Set the default value of whether notify to

calling subscriber when call is forwarded.

Notify, Not notify, User define

ADD FTNNCS

Whether notify to calling subscriber

according to FTN

FTN

Whether notify to calling subscriber

Notify Calling Subscriber

Whether set FTNNCS

Notify or do not notify

Yes

No

Undefined or

User define

NotifyDo not notifyDEFNCS

Notification set by subscriber

when register CFW


2.3 CFW Restriction Configuration

ADD FRFWDNO

The FTN with a full-matched record in this table will be

restricted, such as emergency number 110.

SET BWFTN

Set FTN to be restricted or allowed in batch. The number

segment is defined from begin FTN to end FTN.

For The Whole HLR


2.3 CFW Restriction Configuration

ADD OFATPL

Set number prefix which is restricted or allowed to be a FTN.

It is applied when system provide CFW service to subscriber.

For Subscriber


Chapter 3 Configuration for Other Chapter 3 Configuration for Other ServicesServices

3.1 VLR/SGSN Type3.1 VLR/SGSN Type

3.2 USSD Service3.2 USSD Service

3.3 Roaming Restriction3.3 Roaming Restriction


3.1 VLR/SGSN Type

ADD VLRTYP/ ADD SGSNTYP

VLR Number Prefix

VLR Number Type

− Local, local domestic, cross domestic, local international, cross international

NCCTPL

ADD NCCTPL (Network Capability Configuration)

Set service and MAP phase supported by VLR. HLR will process

service and MAP flow according to this table . It will improve the

network capability and reduce version negotiation between VLR

and HLR.


3.2 USSD Service

Service Code

Function

GSM Mode, WAP Mode, GSMSCF, SearchIMSI

Forwarded-to Address

Set number of USSD center when GSM Mode is used.

ADD USSDDAT


3.3 Roaming Restriction

Set roaming restriction for all subscribers of the HLR.

VLR/SGSN number

Roaming Restriction Rule

Permission, Restriction

Default Roaming Restriction Rule

Permission, Restriction

MOD HLRRR


Example

SET INTROFF: LHLRNO="86138755", CCODE="86";

SET MAPSERV: MAXTIMECALLFWD=3, USSDSUPP=TRUE, MAPVER=TRUE;

SET MAPCONF: MWISUPP=TRUE, CANCELSC=FALSE, ALERTSCREP=3, FWDAREALIMIT=NORESTRICTION, NUMSTRUCTLIMIT= NORESTRICTION, MAPVER=GSMPHASE3, TIMEINTRSUPP=TRUE, ATI-PSISUPP=TRUE, GPRSSMSUPP=TRUE;

ADD DAREA: AREACODE="755", CITYNAME="SHENZHEN";

ADD CNTRCD: CNTRCODE="86", CNAME="China";

ADD VLRTYP: VLRPREFIX="86136111", VLRNAME="VLR1", TYPE=LOCALDOMESTIC;

ADD SGSNTYP: SGSNPREFIX="8613955", NAME="SGSN1", TYPE=LOCAL;

ADD FRFWDNO: FWDNO="112";

ADD ISDNARC: MSISDN="13875512345", AREACODE="755";

ADD IMSIARC: IMSI="460077551234567", AREACODE="755";


Example ADD CALLEDNA: CALLPREFIX="138", SERPROP=PLMN, INFOFLAG=FALSE,

ENTERFLAG=FALSE;

ADD CALLEDNA: CALLPREFIX="168", SERPROP=LOCAL, INFOFLAG=FALSE, ENTERFLAG=TRUE;

ADD CALLEDNA: CALLPREFIX="1860", SERPROP=LOCAL, INFOFLAG=TRUE, ENTERFLAG=FALSE;

ADD CALLEDNA: CALLPREFIX="00", SERPROP=INTERNATIONAL, INFOFLAG=FALSE, ENTERFLAG=FALSE;

ADD CALLEDNA: CALLPREFIX="0", SERPROP=NATIONAL, INFOFLAG=FALSE, ENTERFLAG=FALSE;

ADD CALLEDNA: CALLPREFIX="1", SERPROP=LOCAL, INFOFLAG=FALSE, ENTERFLAG=FALSE;

● ● ● (Configure call prefix from 1~9 as local )

ADD CALLEDNA: CALLPREFIX="9", SERPROP=LOCAL, INFOFLAG=FALSE, ENTERFLAG=FALSE;


Questions

What data should be configured when new IMSI segment is

created in HLR?

How to restrict local subscriber can only register local number as

FTN?


Summary

The function of global data configuration

MAP data configuration

CFW data configuration and check

procedure when subscriber register FTN

Service data configuration

www.huawei.com

Thank You

05-hlr9820 smu global data issue1.1

Documents