05 o.k.i. 100 technical specifications.pdf
TRANSCRIPT
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 1/18
NOPOL ®
O.K.I. 100Technical Specifications
1. O.K.I. 111-32
2. O.K.I. 122-32
3. O.K.I. 122-42
4. O.K.I. 133-51 /133-53
5. O.K.I. 133-51 Concrete base
NOPON OY Turvekuja 6 FIN-00700 Helsinki Finland Tel +358 9 351 5700 Fax +358 9 351 5620E-mail: [email protected] internet: http://www.nopon.fi/
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 2/18
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 3/18
Technical specifications for NOPOL
O.K.I. Submersible Aerator Mixer
NOPOL® O.K.I. 111-32
1. General data • Reference drawing 20T3004-1/0
• Total weight ab. 530 kg (max) ab. 320 kg submerged
• Packing volume ab. 3,3 m3
• Overall dimensions 1355 x 1300 x 1775 (height)
2. Construction materials
• Stator, rotor, hood AISI 316• Frame Fe37B, epoxy painted
3.0 Drive unit 3.1 Motor
• Construction BTM-132ML
• Number of poles 4/6
• Rated output power 4,5 / 3 kW
• cos ϕ 0,79 / 0,72
• Speed 1440 / 960 rpm - 50 Hz 1740 / 1140 rpm - 60 Hz
• Insulation class F / 155 °C VDE 0530• Operation method S1, continuous
• Protection class IP 55 / IP 22 DIN 40050
• Temperature control PTC 155 °C
• Lubrication SKF LGHQ3
• Available standard voltages 380, 400, 415, 500, 660, 690 V - 50 Hz440, 460, 480, 575 V - 60 Hz220/230 V (special cable needed) - 50/60 Hz
3.2 Gear unit • Type NOPOL® helical gear reducer VUM 2080
• Reduction ratio 9,07 (50 Hz) 10,87 (60 Hz)
• Output speed 158 / 106 (50 Hz) 160 / 105 (60 Hz)
• Lubrication Mobil SHC 630, ISO VG 220
• Oil quantity ab. 3 l.
• Sealing NOPOL® HD MG7-seal
4.0 Power cable for electric motor • Type VSB-Aton
• Size 4*6 mm2 S / 4*6 mm2 S
• Sheath rubber ATON™
• Standard CENELEC HD 22 = H07RN-F
Nopon Oy reserves the right to make technical improvements and changes to above specifications
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 111-32 technical specifications Code 4.3.3.1 Page 1 (1)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 4/18
5.0 Signal cable for thermal switch of electric motor• Type VSB ATON
• Size 4*2,5 mm2
S• Sheath rubber ATON™
• Standard CENELEC HD22 = H07RN-F
6.0 Lifting cable• Construction material Stainless steel
• Type 6*36 + FC/soft core
• Diameter ∅ 14 mm, breaking strength >100 kN
7.0 Protection air hose• Material EPDM
• Material durability most chemicals, acid, water, ozone, UV-rad• Diameter ∅ 13/24 mm
8.0 Process air hose
8.1 Process air hose
• Material EPDM
• Material durability Most chemicals, acid, water, ozone, UV-rad
• Temperature range normal: -40...+100 °C, heavy duty: -40...+130 °C
• Diameter ∅ 76/96 mm
• Weight 3,5 kg/m
8.2 Rubber straps NOPOL® straps, EPDM8.3 Hose clamps 25-2R-95 HK, AISI 316 8.4 Flange for process air hose
• to aerator DN 65, boring DIN 2642, AISI 316 (angle 30°)
• to plant air manifold DN 65, boring DIN 2642, AISI 316 (angle 0°)
9.0 Other specifications
9.1 Lengths
• Power cables According to installation conditions, see
• Signal cable O.K.I. product manual
• Lifting cable• Protection air hose
• Process air hose
9.2 Number of items
• Straps 2 pcs / meter process air hose
• Hose clamps 5 pcs / process air hose
• Hose flanges 2 pcs / process air hose
Nopon Oy reserves the right to make technical improvements and changes to above specifications
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 111-32 technical specifications Code 4.3.3.1 Page 2 (2)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 5/18
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 6/18
Technical specifications for NOPOL
O.K.I. Submersible Aerator Mixer
NOPOL® O.K.I. 122-32
1. General data • Reference drawing 45T3006-1/0
• Total weight ab. 970 kg (max) ab. 580 kg submerged
• Packing volume ab. 6,6 m3
• Overall dimensions 1775 x 1700 x 1755 (height)
2. Construction materials
• Stator, rotor, hood AISI 316• Frame Fe37B, epoxy painted
3.0 Drive unit 3.1 Motor
• Construction UADF-160M
• Number of poles 4/6
• Rated output power 6 / 4 kW
• Speed 1460 / 960 rpm - 50 Hz
• Insulation class F VDE 0530
•Operation method S1, continuous• Protection class IP 55 / IP 22 DIN 40050
• Temperature control PTC 160 °C
• Lubrication SKF LGHQ3
• Available standard voltages 380, 400, 415, 500, 660, 690 V - 50 Hz440, 460, 480, 575 V - 60 Hz220/230 V (special cable needed) - 50/60 Hz
3.2 Gear unit • Type NOPOL® helical gear reducer VAM 2125
• Reduction ratio 12,66 (50 Hz)
• Output speed 115 / 76 (50 Hz)
• Lubrication Mobil SHC 630, ISO VG 220
• Oil quantity ab. 9 l.
• Sealing NOPOL® HD MG7-seal
4.0 Power cable for electric motor • Type VSB-Aton
• Size 4*6 mm2 S / 4*6 mm2 S
• Sheath rubber ATON™
• Standard CENELEC HD 22 = H07RN-F
Nopon Oy reserves the right to make technical improvements and changes to above specifications
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 122-32 technical specifications Code 4.3.3.1 Page 1 (1)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 7/18
5.0 Signal cable for thermal switch of electric motor• Type VSB ATON
• Size 4*2,5 mm2
S• Sheath rubber ATON™
• Standard CENELEC HD22 = H07RN-F
6.0 Lifting cable• Construction material Stainless steel
• Type 6*36 + FC/soft core
• Diameter ∅ 14 mm, breaking strength >100 kN
7.0 Protection air hose• Material EPDM
• Material durability most chemicals, acid, water, ozone, UV-rad• Diameter ∅ 13/24 mm
8.0 Process air hose
8.1 Process air hose
• Material EPDM
• Material durability Most chemicals, acid, water, ozone, UV-rad
• Temperature range normal: -40...+100 °C, heavy duty: -40...+130 °C
• Diameter ∅ 76/96 mm
• Weight 3,5 kg/m
8.2 Rubber straps NOPOL® straps, EPDM8.3 Hose clamps 25-2R-95 HK, AISI 316 8.4 Flange for process air hose
• to aerator DN 65, boring DIN 2642, AISI 316 (angle 30°)
• to plant air manifold DN 65, boring DIN 2642, AISI 316 (angle 0°)
9.0 Other specifications
9.1 Lengths
• Power cables According to installation conditions, see
• Signal cable O.K.I. product manual
• Lifting cable• Protection air hose
• Process air hose
9.2 Number of items
• Straps 2 pcs / meter process air hose
• Hose clamps 5 pcs / process air hose
• Hose flanges 2 pcs / process air hose
Nopon Oy reserves the right to make technical improvements and changes to above specifications
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 122-32 technical specifications Code 4.3.3.1 Page 2 (2)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 8/18
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 9/18
Technical specifications for NOPOL
O.K.I. Submersible Aerator Mixer
NOPOL® O.K.I. 122-42
1. General data • Reference drawing 45T3007-1/0
• Total weight ab. 1040 kg (max) ab. 590 kg submerged
• Packing volume ab. 6,8 m3
• Overall dimensions 1830 x 1835 x 2105 (height)
2. Construction materials
• Stator, rotor, hood AISI 316• Frame Fe37B, epoxy painted
3.0 Drive unit 3.1 Motor
• Construction UADF-160LKE
• Number of poles 4/6
• Rated output power 11 / 7,5 kW
• Speed 1470 / 970 rpm - 50 Hz
• Insulation class F VDE 0530
•Operation method S1, continuous• Protection class IP 55 / IP 22 DIN 40050
• Temperature control PTC 160 °C
• Lubrication SKF LGHQ3
• Available standard voltages 380, 400, 415, 500, 660, 690 V - 50 Hz440, 460, 480, 575 V - 60 Hz220/230 V (special cable needed) - 50/60 Hz
3.2 Gear unit • Type NOPOL® helical gear reducer VAM 2125
• Reduction ratio 12,66 (50 Hz)
• Output speed 116 / 77 (50 Hz)
• Lubrication Mobil SHC 630, ISO VG 220
• Oil quantity ab. 9 l.
• Sealing NOPOL® HD MG7-seal
4.0 Power cable for electric motor • Type VSB-Aton
• Size 4*6 mm2 S / 4*6 mm2 S
• Sheath rubber ATON™
• Standard CENELEC HD 22 = H07RN-F
Nopon Oy reserves the right to make technical improvements and changes to above specifications
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 122-42 technical specifications Code 4.3.3.1 Page 1 (1)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 10/18
5.0 Signal cable for thermal switch of electric motor• Type VSB ATON
• Size 4*2,5 mm2
S• Sheath rubber ATON™
• Standard CENELEC HD22 = H07RN-F
6.0 Lifting cable• Construction material Stainless steel
• Type 6*36 + FC/soft core
• Diameter ∅ 14 mm, breaking strength >100 kN
7.0 Protection air hose• Material EPDM
• Material durability most chemicals, acid, water, ozone, UV-rad• Diameter ∅ 13/24 mm
8.0 Process air hose
8.1 Process air hose
• Material EPDM
• Material durability Most chemicals, acid, water, ozone, UV-rad
• Temperature range normal: -40...+100 °C, heavy duty: -40...+130 °C
• Diameter ∅ 76/96 mm
• Weight 3,5 kg/m
8.2 Rubber straps NOPOL® straps, EPDM8.3 Hose clamps 25-2R-95 HK, AISI 316 8.4 Flange for process air hose
• to aerator DN 65, boring DIN 2642, AISI 316 (angle 30°)
• to plant air manifold DN 65, boring DIN 2642, AISI 316 (angle 0°)
9.0 Other specifications
9.1 Lengths
• Power cables According to installation conditions, see
• Signal cable O.K.I. product manual
• Lifting cable• Protection air hose
• Process air hose
9.2 Number of items
• Straps 2 pcs / meter process air hose
• Hose clamps 5 pcs / process air hose
• Hose flanges 2 pcs / process air hose
Nopon Oy reserves the right to make technical improvements and changes to above specifications
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 122-42 technical specifications Code 4.3.3.1 Page 2 (2)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 11/18
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 12/18
Nopon Oy reserves the right to make technical improvements and changes to above specifications
Technical specifications for NOPOL O.K.I. Submersible Aerator Mixer
NOPOL®
O.K.I. 133-51
1. General data • Reference drawing 85T3017-1/0
• Total weight ab. 1810 kg (max) ab. 1150 kg submerged
• Packing volume ab. 12,2 m3
• Overall dimensions 2315 x 2341 x 2249 (height)
2. Construction materials• Stator, rotor, hood AISI 316
• Frame Fe37B, epoxy painted
3.0 Drive unit 3.1 Motor
• Construction Brook Hansen WUDF 180LD
• Standard IEC
• Number of poles 4
• Rated output power 22,0 kW
• Speed 1465 rpm - 50 Hz 1760 rpm - 60 Hz
• cos ϕ 0,85
• Insulation class F / 155 °C VDE 0530
• Operation method S1, continuous
• Protection class IP 55 / IP 22 DIN 40050
• Temperature control PTC 155 °C
• Lubrication Esso Unirex N3
• Available standard voltages 380, 400, 415, 500, 660, 690 V - 50 Hz440, 460, 480, 575 V - 60 Hz
220/230 V (special cable needed) - 50/60 Hz
3.2 Gear unit • Type NOPOL® VAM 2140
• Reduction ratio 12,97 (50 Hz) 15,52 (60 Hz)
• Output speed 113 (50 Hz) 113 (60 Hz)Lubrication Mobil SHC 630, ISO VG-220
• Oil quantity ab. 12,0 l
• Sealing NOPOL® HD MG7,1-seal
4.0 Power cable for electric motor • Type VSB-Aton
• Size 4*10 mm2
• Sheath rubber ATON™
• Standard CENELEC HD 22 = H07RN-F
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 133-51 technical specifications, rev 1 Code 4.3.3.1 Page 1 (1)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 13/18
Nopon Oy reserves the right to make technical improvements and changes to above specifications
5.0 Signal cable for thermal switch of electric motor• Type VSB ATON
• Size 4*2,5 mm2
• Sheath rubber ATON™
• Standard CENELEC HD22 = H07RN-F
6.0 Lifting cable• Construction material Stainless steel
• Type 6*36 + FC/soft core
• Diameter φ 14 mm, breaking strength >100 kN
7.0 Protection air hose• Material EPDM
• Material durability most chemicals, acid, water, ozone, UV-rad
• Diameter 13/24 mm
8.0 Process air hose
8.1 Process air hose
• Material EPDM
• Material durability Most chemicals, acid, water, ozone, UV-rad
• Temperature range normal: -40...+100 °C, heavy duty: -40...+130 °C
• Diameter 127/149 mm
• Weight 5,9 kg/m
8.2 Rubber straps NOPOL® straps, EPDM8.3 Hose clamps 25-2R-150 HK, AISI 316 8.4 Flange for process air hose
• to aerator DN 125, boring DIN 2642, AISI 316 (angle 30°)
• to plant air manifold DN 125, boring DIN 2642, AISI 316 (angle 0°)
9.0 Other specifications
9.1 Lengths
• Power cables According to installation conditions, see
• Signal cable O.K.I. product manual
• Lifting cable• Protection air hose
• Process air hose
9.2 Number of items
• Straps 2 pcs / meter process air hose
• Hose clamps 5 pcs / process air hose
• Hose flanges 2 pcs / process air hose
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 133-51 technical specifications, rev 1 Code 4.3.3.1 Page 2 (2)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 14/18
Nopon Oy reserves the right to make technical improvements and changes to above specifications
Technical specifications for NOPOL O.K.I. Submersible Aerator Mixer
NOPOL®
O.K.I. 133-53
1. General data • Reference drawing 85T3017-1/0
• Total weight ab. 1820 kg (max) ab. 1260 kg submerged
• Packing volume ab. 11,3 m3
• Overall dimensions 2315 x 2341 x 2249 (height)
2. Construction materials• Stator, rotor, hood AISI 316
• Frame Fe37B, epoxy painted
3.0 Drive unit 3.1 Motor
• Construction Brook Hansen WUDF 180LD
• Standard IEC
• Number of poles 4/6
• Rated output power 18/12 kW
• Speed 1460/970 rpm - 50 Hz 1750/1160 rpm - 60 Hz
• cos ϕ 0,85/0,75
• Insulation class F / 150 °C VDE 0530
• Operation method S1, continuous
• Protection class IP 55 / IP 22 DIN 40050
• Temperature control PTC 160 °C
• Lubrication Esso Unirex N3
• Available standard voltages 380, 400, 415, 500, 660, 690 V - 50 Hz440, 460, 480, 575 V - 60 Hz
220/230 V (special cable needed) - 50/60 Hz
3.2 Gear unit • Type NOPOL® VAM 2140
• Reduction ratio 12,97 (50 Hz) 15,52 (60 Hz)
• Output speed 113/75 (50 Hz) 113/75 (60 Hz)
• Lubrication Mobil SHC 630, ISO VG-220
• Oil quantity ab. 12,0 l
• Sealing NOPOL® HD MG7,1-seal
4.0 Power cable for electric motor • Type VSB-Aton
• Size 4*10 mm2 / 4*10 mm2
• Sheath rubber ATON™
• Standard CENELEC HD 22 = H07RN-F
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 133-53 technical specifications, rev 1 Code 4.3.3.1 Page 1 (1)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 15/18
Nopon Oy reserves the right to make technical improvements and changes to above specifications
5.0 Signal cable for thermal switch of electric motor• Type VSB ATON
• Size 4*2,5 mm2
• Sheath rubber ATON™
• Standard CENELEC HD22 = H07RN-F
6.0 Lifting cable• Construction material Stainless steel
• Type 6*36 + FC/soft core
• Diameter φ 14 mm, breaking strength >100 kN
7.0 Protection air hose• Material EPDM
• Material durability most chemicals, acid, water, ozone, UV-rad
• Diameter 13/24 mm
8.0 Process air hose
8.1 Process air hose
• Material EPDM
• Material durability Most chemicals, acid, water, ozone, UV-rad
• Temperature range normal: -40...+100 °C, heavy duty: -40...+130 °C
• Diameter 127/149 mm
• Weight 5,9 kg/m
8.2 Rubber straps NOPOL® straps, EPDM8.3 Hose clamps 25-2R-150 HK, AISI 316 8.4 Flange for process air hose
• to aerator DN 125, boring DIN 2642, AISI 316 (angle 30°)
• to plant air manifold DN 125, boring DIN 2642, AISI 316 (angle 0°)
9.0 Other specifications
9.1 Lengths
• Power cables According to installation conditions, see
• Signal cable O.K.I. product manual
• Lifting cable• Protection air hose
• Process air hose
9.2 Number of items
• Straps 2 pcs / meter process air hose
• Hose clamps 5 pcs / process air hose
• Hose flanges 2 pcs / process air hose
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 133-53 technical specifications, rev 1 Code 4.3.3.1 Page 2 (2)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 16/18
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 17/18
Nopon Oy reserves the right to make technical improvements and changes to above specifications
Technical specifications for NOPOL O.K.I. Submersible Aerator Mixer
NOPOL®
O.K.I. 133-51 with a concrete base
1. General data • Reference drawing 85T3012-2/1
• Total weight approx. 1900 kg (max) approx. 1150 kg submerged
• Packing volume approx. 13,3 m3
• Overall dimensions 2660 x 2400 x 2400 (height)
2. Construction materials• Stator, rotor, hood AISI 316
• Frame AISI 316 and steel reinforced concrete
3.0 Drive unit 3.1 Motor
• Construction Brook Hansen UADF-180LD
• Standard IEC / NEMA
• Number of poles 4
• Rated output power 22 kW
• Speed 1465 rpm - 50 Hz 1760 rpm - 60 Hz
• cos ϕ 0,85
• Insulation class F / 155 °C VDE 0530
• Operation method S1, continuous• Protection class IP 55 / IP 22 DIN 40050
• Temperature control PTC 160 °C
• Lubrication SKF LGHQ3
• Available standard voltages 380, 400, 415, 500, 660, 690 V - 50 Hz440, 460, 480, 575 V - 60 Hz220/230 V (special cable needed) - 50/60 Hz
3.2 Gear unit • Type NOPOL® VAM 2140
• Reduction ratio 12,97 (50 Hz) 15,52 (60 Hz)
• Output speed 113 (50 Hz) 113 (60 Hz)• Lubrication Mobil SHC 630, ISO VG-220
• Oil quantity approx. 11 l.
• Sealing NOPOL® HD MG7,1-seal
4.0 Power cable for electric motor • Type VSB-Aton
• Size 4*10 mm2
• Sheath rubber ATON™
• Standard CENELEC HD 22 = H07RN-F
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 133-51 conc.base, tech. specific, rev 1 Code 4.3.3.1 Page 1 (1)
Written by: JL Inspected by: OMO Accepted by: ERN
8/14/2019 05 O.K.I. 100 Technical Specifications.pdf
http://slidepdf.com/reader/full/05-oki-100-technical-specificationspdf 18/18
Nopon Oy reserves the right to make technical improvements and changes to above specifications
5.0 Signal cable for thermal switch of electric motor• Type VSB ATON
• Size 4*2,5 mm2
• Sheath rubber ATON™
• Standard CENELEC HD22 = H07RN-F
6.0 Lifting cable• Construction material Stainless steel
• Type 6*36 + FC/soft core
• Diameter ∅ 14 mm, breaking strength >100 kN
7.0 Protection air hose• Material EPDM
• Material durability most chemicals, acid, water, ozone, UV-rad
• Diameter 13/24 mm
8.0 Process air hose
8.1 Process air hose
• Material EPDM
• Material durability Most chemicals, acid, water, ozone, UV-rad
• Temperature range normal: -40...+100 °C, heavy duty: -40...+130 °C
• Diameter 127/149 mm
• Weight 5,9 kg/m
8.2 Rubber straps NOPOL® straps, EPDM8.3 Hose clamps 25-2R-150 HK, AISI 316 8.4 Flange for process air hose
• to aerator DN 125, boring DIN 2642, AISI 316 (angle 30°)
• to plant air manifold DN 125, boring DIN 2642, AISI 316 (angle 0°)
9.0 Other specifications
9.1 Lengths
• Power cables According to installation conditions, see
• Signal cable O.K.I. product manual
• Lifting cable
• Protection air hose
• Process air hose
9.2 Number of items
• Straps 2 pcs / meter process air hose
• Hose clamps 5 pcs / process air hose
• Hose flanges 2 pcs / process air hose
Nopon Oy Technical documents Document level 4 Date: 22.4.2002
O.K.I. 133-51 conc.base, tech. specific, rev 1 Code 4.3.3.1 Page 2 (2)