0504 inv - sketch constraints iv
DESCRIPTION
y dryftu u c6u 6u 6uruxryuxru rx6u rxuxru rx 6uxrurxu rxurxuxr uxru6xrux ruxruxruxrTRANSCRIPT
-
Sketch Constraints IVUsing Autodesk Inventor
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
1.INITIALIZATION
Continued From Sketch Constraints III
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
a. Startup
Start: Inventor
Select:Projects
Browse:
Project Name:
2/21/2014 Inventor - Sketch Constraints IV -jcS
Example Project Window Your folders will be different
-
a. Inventor: Folder | Project
Find / openProject:
Select / VerifyWorkspace
Libraries
2/21/2014 Inventor - Sketch Constraints IV -jcS
Example Project Window Your folders will be different
-
EXAMPLE 4
2D Sketch Constraints
Symmetrical
Colinear
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
a. Open (given file)
OpenLibrary:
File:
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
b. Save a Copy
Save-As: Save in:
File name
File type:
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
c. Edit the sketch
Pick the line
Edit Sketch
Note: Parallel / Perpendicular
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
d. Sketch - Rotate
Rotate:
Select:
Center Point
Angle
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
e. Sketch: move
Move:Select: all
Base Point: Select
Locate
Line 2:
Verify Results:
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
f. Centerlines
Centerline
Line
Midpoint:
Midpoint:
Vertical:
Line:
Repeat:
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
g. horizontal -vertical
Lines: Horizontal
Vertical
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
h. Position - Verify
Drag: Initial:
Final:
Note: Symmetry
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
i. Dimension
Pick : Sketch:
Dimension:
Results:Values:
Restraints:
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
h. Position - Verify
Drag: Initial:
Final:
Note: S
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
i. Add Constraint
ColinearLine 1
Line 2
Results:
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
j. Constrain | Dimension
SymmetricLine 1
Line 2
Centerline
Dimension
Results:
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
k. Continue
Position (Drag)
Constrain Colinear
Symmetric
Constrain: Dimension
Equal
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
l. Finish
Position (Drag)
Constrain Colinear
Symmetric
Dimension
Equal
Horizontal (points)
Vertical (points)
Verify Constraints
Degrees of Freedom
2/21/2014 Inventor - Sketch Constraints IV -jcS
-
m. region properties
Pick: Region Properties
The region:
Results:
2/21/2014 Inventor - Sketch Constraints IV -jcS