07 - midas pool products · mounting parts skimmers, ... stainless steel, gunmetal and bronze. ......

147

07

07 M

ount

ing

Part

s

Skimmers, drains, inlet nozzles and wall conduits are essential for the functioning of each pool. Built-in parts from MIDAS are available in the qualities plastic, stainless steel, gunmetal and bronze. Quality is important for the components.Styrofoam stones are first choice in pool construction and have integrated the thermal insulation. Swimming pool liners in many designs and colors always ensure the perfect look of your pool.

MOUNTING PARTS

OVERVIEW

148 Stainless Steel Skimmer

150 ABS Skimmer

152 Inlet fittings, inlet nozzles, floor drains, suction fittings,

wall conduits made of gunmetal and bronze

154 Wall Inlets Nozzles, Floor Inlets, Floor Drains Stainless Steel

155 ABS Wall Inlets, Floor Inlets, Floor Drains

156 Wall Conduits Stainless Steel + ABS

157 Gratings, Grating Plates, Equipment Gratings

159 Formwork stone

160 Swimming Pool Liners, Liquid Liner, Equipment

164 Ladders (V4A/AISI 316)

166 Ladders (V2A/AISI 304)

148

07 MOUNTING PARTS

ELEGANCE IN STAINLESS STEELThe skimmer in elegant design meets the highest standards and are a guarantee for visually successful solutions. Owner of stainless steel products are justifiably proud of the extravagance of shimmering silver surfaces. The harmonious overall impression is increased if further installation parts are used in the same material. But stainless steel is not only a good-looking material, it also excels in its high resistance to chemicals and aging.

WATER LEVEL CONTROLLER UNIVERSALMechanical water level controller, side water connection 3/8” made of brass, low noise

optional accessories Code kgWater level controller universal 40.01 0,36

PVC connection for overflow ¾" external thread x 25/20 mm plus reduction 50 mm x 25 mm

optional accessories Code kgPVC connection for overflow 0255-E1

SLIM LINE SKIMMER STAINLESS STEEL COMPLETE MADE OF STAINLESS STEEL V4A/AISI 316

• suction opening: 495 x 73 mm (545 x 130 mm outside)

• this new custom-made model impresses with its solid construction and its polished surfaces

• quality surface cleaner for a great look• with flange, gaskets, scews and cover for

installation in liner, fiberglass, polypropyle-ne and segment basins

• incl. device for water level controller MIDAS code 40.01

• depth: 525 mm• depth skimmer neck: 265 mm (bridges a

complete 25 pool wall)• connection: 2” internal thread (vertical

outlet)• flow-rate: 10–14 m3/h• 1“ Overflow connection

NEW

Article Code kgSlim Line Skimmer Stainless Steel for liner pools (incl. flange) 0255 17Slim Line Skimmer Stainless Steel for concrete pools 0255-B 17

149

07

07 M

ount

ing

Part

s

STAINLESS STEEL SKIMMER 25 LITER UNIVERSAL

Article Neck length Code kgSkimmer 70 mm 05.07 7,6Skimmer 250 mm 05.08 9,6with overflow connection 70 mm 05.09 7,7with overflow connection 250 mm 05.10 9,7

round lid opening,overflow connection

70 mm 05.19 7,7

Surface Skimmer for concrete pools and liner pools V2A/AISI 304 stainless steel, female thread connection 2“, overflow connection 2“, Overall height 370 mm, overall width 275 mm, 210 x 165 mm flap opening, delivered with gaskets, flange & screws, strainer made of ABS, Flow-rate: 25 m3/h.

STAINLESS STEEL SKIMMER 35 LITER UNIVERSAL

Article Code kgSkimmer 05.11 7,5with overflow connection 05.12 7,6

Surface Skimmer for concrete pools and liner pools V2A/AISI 304 stainless steel, female thread connection 2“, overflow connection 2“, Overall height 325 mm, overall width 410 mm, 370 x 110 mm flap opening, delivered with gaskets, flange & screws, strainer made of ABS, Flow-rate: 35 m3/h.

150

07 MOUNTING PARTS

SLIM LINE SKIMMER ABS PLASTIC

NEW

Article Code kgSlim Line Skimmer ABS plastic for liner pools (incl. flange) 0254 3,2Slim Line Skimmer ABS plastic for concrete pools 0254-B 3,7

• suction opening: 498 x 84 mm (550 x 135 mm outside)• convinces with new design and modern functionality• robust, made of high-quality ABS• incl. cover for liner pools or with flange, gaskets, scews and cover for

installation in liner, fiberglass, polypropylene and segment basins• with integrated threaded sleeves to fix the screws of flange• color: white• depth: 620 mm• depth skimmer neck: 370 mm• connection: 2” and 1½” inner thread (vertical outlet)• flow-rate: 7 m3/h• device for overflow connection 32 mm

151

07

07 M

ount

ing

Part

s

ABS MINI SKIMMER

Suitable for Code kgSteel wall pools 620-S 2,0

MINI skimmer ABS, complete set, Ø 32 mm and Ø 38 mm hose connection, incl. suction plate (skim vac), cover plate, basket, inlet nozzle and teflon tape, supplied with flange, gaskets and screws for suitable all steel wall pools, robust construction, Flow-rate: 5 m3/h, color: white.

A

C

B

D

E

F

GH

A CoverB Vac PlateC ScrewD Basket with plastic handleE WeirF Skimmer supportG Double layer gasketH Face plate

ABS STANDARD SKIMMER

Suitable for Code kgConcrete Pools 0249 5,3Liner/prefabricated pools (Flange) 0249F 6,0

Surfaces is an skimmer for concrete, liner and prefabricated pools, skimmer with universal solvent socket 50 d (closed) and 1½“ IG 2“ AG, overflow connection Ø 40 mm, lid opening 208 x 140 mm, Flow-rate: 5 m3/h, color: white.

0249 0249F

A Skimmer LidB Skimmer CollarC Vac PlateD Skimmer BasketE Skimmer BodyF Skimmer WeirI-1 GasketJ-1 Face Flange (for Vinyl Pools)K-1 Face Flange Cover (for Vinyl Pools)L-1 Face Flange Cover (for Concrete Pools)

Article Code kgCover (A) 620-S-E1Inlet nozzle (B) 620-S-E2Basket with plastic handle (D) 620-S-E3Flap (E) 620-S-E4Gasket (G) 620-S-E5

OPTIONLAL EQUIPMENT

ABS WIDE MOUTH SKIMMER DELUXESurfaces is an skimmer for liner and prefabricated pools , skimmer with universal female solvent socket 50 d (closed) and 1½“ IG 2“ AG, overflow connection Ø 40 mm, lid opening 353 x 167 mm, Flow-rate: 5 m3/h, color: white.

Suitable for Code kgLiner/prefabricated pools (Flange) 0250F 7,0

A Skimmer LidB Skimmer CollarC Vac PlateD Skimmer BasketE Skimmer BodyF Skimmer WeirH Wide Mouth

I-2 GasketJ-2 Face Flange (for Vinyl

Pools)K-2 Face Flange Cover (for

Vinyl Pools)L-1 Face Flange Cover (for

Concrete Pools)

152

07 MOUNTING PARTS

INFLATING TIGHTS WITH FLANGE SET2“ external thread, with cover and ball 4 x 8 mm Material: Stainless steel V4A / AISI 316L

Suitable for Material Lenght Code kgLiner pool (including flange set) gunmetal* 40 mm 03.22Liner pool (including flange set) bronze** 40 mm 03.22-BLiner pool (including flange set) gunmetal* 70 mm 03.24Liner pool (including flange set) bronze** 70 mm 03.24-B

NEW

COUNTERPIECE FOR PREFABRICATED BASIN

2“ internal thread, incl. seal

Suitable for Material Code kg

Counterpiece for prefabricated basin gunmetal* 03.25

INLET NOZZLES WITHOUT FLANGE SET2“ external thread, with cover and ball 4 x 8 mm, material: stainless steel V4A / AISI 316L

Suitable for material Lenght Code kg

Tiled and prefabricated pools (without counter replacement)

gunmetal* 40 mm 03.20


bronze** 40 mm 03.20-B


gunmetal* 70 mm 03.21


bronze** 70 mm 03.21-B

* not suitable for salt electrolysis ** max. salt concentration: 6 %

INLETS FLANGED PARTSWith cover and ball 4 x 8 mm, material: stainless steel V4A / AISI 316L for wall ducts # 03.32, 03.32-B, 03.33 and 03.33-B


Liner pool (including flange set) gunmetal* 03.34

Liner pool (including flange set) bronze** 03.34-B

FLOOR DRAIN 90 ° OUTLET1½“ internal thread, with anti-vortex cover Ø 168 mm, Material: Stainless steel V4A / AISI 316L.


Liner pool (including flange set) gunmetal* 03.11-F

Liner pool (including flange set) bronze** 03.11-FB

Concrete pool gunmetal* 03.11-B

Concrete pool bronze** 03.11-BB

NEW

NEW

Made in Germany

Made in Germany

Made in Germany

Made in Germany

Made in Germany

153

07

07 M

ount

ing

Part

s

* not suitable for salt electrolysis ** max. salt concentration: 6 %

FLOOR DRAIN VERTICAL EXIT1½“ internal thread, with anti-vortex cover Ø 168 mm Material: Stainless steel V4A / AISI 316L, Ø 168 mm

Suitable for Material Code kgLiner pool (including flange set) gunmetal* 03.18-FLiner pool (including flange set) bronze** 03.18-FBPrefabricated pool (including counter flange) gunmetal* 03.18-FEPrefabricated pool (including counter flange) bronze** 03.18-FEBConcrete pool gunmetal* 03.18-BConcrete pool bronze** 03.18-BB

SUCTION FITTINGSPlug-in base element 2“ AG, with cover made of stainless steel V4A / AISI 316L

Suitable for Material Lenght Code kg

Liner pool (including flange set) gunmetal* 40 mm 03.26-F

Liner pool (including flange set) bronze** 40 mm 03.26-FB


gunmetal* 40 mm 03.26-FE


bronze** 40 mm 03.26-FEB


gunmetal* 70 mm 03.27-FE


bronze** 70 mm 03.27-FEB

ACCESSORY BASE ELEMENTS

Article Material Code kg

Hose nozzle 38 mm with O-ring gunmetal* 03.28

Hose nozzle 38 mm with O-ring bronze** 03.28-B

Sealing plug with O-ring V4A/AISI 316L 03.29

Counterparts 2” for prefabricated pools (including seal)

gunmetal* 03.25

WALL CONDUIT2 x 2“ internal thread, for tile and liner pools

Material Lenght Code kg

Gunmetal* 240 mm 03.32

Bronze** 240 mm 03.32-B

Gunmetal* 300 mm 03.33

Bronze** 300 mm 03.33-B

03.26-F

03.26-FE / 03.27-FE

03.28

03.29

03.25

NEW

NEW

Made in Germany

Made in Germany

Made in Germany

Made in Germany

154

07 MOUNTING PARTS

Suitable for external thread Code kgLiner/prefabricated pools perpendicular 03.04 0,4Liner/prefabricated pools horizontal 03.05 0,6Liner/prefabricated pools comb. perpendicular 03.06 0,5Concrete pools perpendicular 03.07 0,2Concrete pools horizontal 03.08 0,4Concrete pools comb. perpendicular 03.09 0,4

Suitable for Code kg#03.04 incl. 300 mm wall conduit 03.14 0,9#03.05 incl. 300 mm wall conduit 03.15 1,2#03.06 incl. 300 mm wall conduit 03.16 1,1

GROUND INLET NOZZLE 1½” EXTERNAL THREAD

WITH WALL DUCT

Head: polished stainless steel AISI 304, Body: Stainless steel matt AISI 304, Ø 94 mm

ECO-FLOOR DRAIN ROUND UNPOLISHED

Suitable for Connections d Code kgConcrete pools 1½” IG 160 mm 04.10 1,1Concrete pools 2½” IG 260 mm 04.11 2,0

FLOOR DRAIN SQUARE POLISHED

Suitable for Connections Dimension (bxt) Code kgLiner pools 1½” IG 150 x 150 mm 04.05 1,7Liner pools 1½” IG 165 x 165 mm 04.06 1,8Liner pools 2” IG 250 x 250 mm 04.08 4,0Liner pools 2½” AG 200 x 200 mm 04.17 2,8Concrete pools 1½” IG 165 x 165 mm 04.07 1,4

FLOOR DRAIN ROUND POLISHED

Suitable for Connections d Code kgLiner pools 1½” IG 155 mm 04.01 1,3Liner pools 2” IG 165 mm 04.02 1,5Liner pools 2” IG 250 mm 04.03 3,0Liner pools 2½” AG 200 mm 04.16 2,5Liner pools 2½” AG 320 mm 04.04 4,2Concrete pools 1½” IG 155 mm 04.09 1,2

Head: polished stainless steel AISI 304, Body: stainless steel matt AISI 304

Polished stainless steel AISI 304, Body: stainless steel matt AISI 304, height: 135 mm

Head: polished stainless steel AISI 304, Body: stainless steel matt AISI 304

WALL INLET NOZZLE

Suitable for external thread Code kg

Liner/prefabricated pools (Flange) 1“ 03.03 0,15Liner/prefabricated pools (Flange) 1½” 03.01 0,40Concrete pools 1½” 03.02 0,25Concrete pools 2“ 03.30 0,35

Suitable for Code kg#03.01 incl. 300 mm wall conduit 03.12 1,0#03.03 incl. 300 mm wall conduit 03.13 0,8

WALL INLET NOZZLE WITH WALL DUCT

Head: polished stainless steel AISI 304, Body: Stainless steel matt AISI 304, Ø 90 mm

155

07

07 M

ount

ing

Part

s

3” GROUND INLET NOZZLE ADJUSTABLE

Suitable for Grid material Packing Code kgConcrete pools ABS 2 0796 1,35Concrete pools stainless steel 2 0798 1,40Liner/prefabricated ABS 2 0795 1,35Liner/prefabricated stainless steel 2 0797 1,40

Made of ABS for concrete and liner pools, Grid of stainless steel V2A/AISI 304, flow rate adjust-able by turn on the grid, supplied with gaskets & bolts, for liner/prefabricated pools additionally with flange, connection 90 mm bonded socket joint, inlet surface area: 0,015 m², recommended flow rate: 20 m³/h at 0,4 m/s, maximum flow rate: 26 m³/h at 0,5 m/s, color: white.

2“ FLOOR DRAIN

Suitable for Connections Packing Code kgConcrete pools 2” IG 4 1467 1,6Liner/prefabricated 2” IG 4 1467F 1,0

Made of ABS, Ø 170 mm, for concrete pools, with side 2“ IG-connection, cover is detach-able, max. flow rate 15 m³/h, min. 2 floor drains per pool are recommended, supplied with gaskets & bolts, for liner/prefabricated pools additionally with flange, color: white.

INLET NOZZLE MULTI-FLOW ADJUSTABLE

Suitable for Connections Packing Code kgConcrete pools d 50 mm/2“

External thread24 0295 0,18

Prefabricated pools d 50 mm/2“ External thread

24 0295F 0,19

Liner pools d 50 mm/2“ External thread

12 0330 0,38

Adjustable inlet nozzle for screwing with screw collar, made of ABS, for concrete pools, size and flow rate with cherry adjustable, ball diameter 14-20-25, for prefabricated pools delivery with gaskets and nuts, max. recommended flow rate 2,2 m³/h - 4,5 m³/h - 7,0 m³/h, for liner pools additionally with flange and stainless steel screws, color: white

2” GROUND INLET NOZZLE ADJUSTABLE

Suitable for Connections Packing Code kgConcrete pools d 50 mm/2” External thread 1 2825 0,45Liner/prefabricated pools d 50 mm/2” External thread 1 2825F 0,45

Made of ABS, 360° regulation of the fresh water flow, for concrete pools max. recom-mended flow rate is 12,0 m³/h, chemical resistant, supplied with gaskets & bolts, for liner/prefabricated pools additionally with flange, connections inside with bonded socket joint d = 50 mm and outside 2“ External thread, color: white

2825

2825F

0295 0295F0330

DRAIN GRILL, SQUARE FRAME

Article Packing Code kgFloor drain quadrat 300 x 300 mm 12 2812Floor drain quadrat 230 x 230 mm 12 2809

300 x 300 mm or 230 x 230 mm, max. flow rate: 43 m³/h, color: white.

156

07 MOUNTING PARTS

2” VACUUM FITTING

Article Connections Packing Code kgConcrete pools Ø 60 mm slip outside 48 0300 0,18Concrete pools d 50 / 2” External thread 24 0301 0,16Prefabricated pools d 50 / 2” External thread 24 0301F 0,17

Made of ABS for concrete and prefabricated pools, closing lid: 1 ½“ AG, max. pressure: 6 bar, for prefabricated pools delivery with gaskets and bolts, color: white

2” WALL CONDUIT OF PVC

Front side Packing Code kgØ 60 mm slip connection 6 0324E 0,52“ Internal thread connection 6 0324 0,5

For concrete pools, 300 mm long, rear side 2“ external thread, color: grey

Length mm Internal-thread Packing Code kg300 1½” 1 09.01 0,65400 1½” 1 09.02 0,90300 2” 1 09.03 0,90400 2” 1 09.04 1,20

WALL CONDUIT OF STAINLESS STEEL

Length mm Internal-thread Packing Code kg300 1½” 1 09.07 1,0400 1½” 1 09.08 1,0300 2” 1 09.09 1,0400 2” 1 09.10 1,0

WALL CONDUIT OF STAINLESS STEEL WITH FLANGE

MULTIFLOW-ADJUSTER

Article Packing Code kgMultiflow-adjuster, blue 1 0299 1,0

For concrete pools, V2A/AISI 304

for prefabricated pools, V2A/AISI 304

For simple regulating of flow rate at the inlet nozzle, suitable only for multiflow type adjustable

0301 0301F

0300

157

07

07 M

ount

ing

Part

s

Heigth x width mm Packing Code kg22 x 195 470 350 0,03422 x 245 320 351 0,04322 x 295 300 352 0,06022 x 335 250 353 0,068

35 x 195 450 354 0,03735 x 245 300 355 0,04735 x 295 290 356 0,06735 x 335 250 357 0,072

GRATING FOR ROUND MODELMade of polypropylen, connection via click system, approx. 45 pieces per meter

Art. / Code h (mm) L (mm) L1 (mm) R (mm) r (mm)# 350 22 200 195 445 250# 351 22 250 245 545 300# 352 22 300 295 645 350# 353 22 340 335 785 450# 354 35 200 195 445 250# 355 35 250 245 545 300# 356 35 300 295 645 350# 357 35 340 335 785 450

Heigth x width mm Packing Code kg22 x 195 340 358 0,03522 x 245 305 359 0,043

GRATINGMade of polypropylen, the grating is chained with cable, approx. 49 pieces per meter

Art. / Code h (mm) L (mm) L1 (mm)# 358 22 200 195

# 359 22 200 245

Article Packing Code kgFastening cable stainless steel 1 m 360 21,0Endpiece for cable fixing 1 361 1,50

FASTENING CABLEStainless steel V4A/AISI 316 (14571), plastic cover ø 2,5 mm, to chain the grating, please specify the wanted cable length, pricing per meter

510

510

158

07 MOUNTING PARTS

Heigth x width mm Packing Code kg22 x 245 52 363 0,43822 x 295 45 364 0,51322 x 335 38 365 0,579

GRATING PLATEMade of polypropylen, the plates are connected with a clip-system 5 pieces = 0,975 m

Art. / Code h (mm) L (mm) L1 (mm)# 363 22 250 245

# 364 22 300 295

# 365 22 340 335

Heigth x width mm Packing Code kg22 x 195 4 370 0,7022 x 245 4 371 0,9022 x 295 4 372 1,2022 x 335 4 373 1,43

35 x 195 4 374 0,8035 x 245 4 375 1,0535 x 295 4 376 1,3335 x 335 4 378 1,55

CORNER TILE 90°Made of polypropylen

Art. / Code A (mm) H (mm) L (mm) P (mm)# 370 245 22 195 127# 371 295 22 245 127# 372 345 22 295 127# 373 385 22 335 127# 374 245 35 195 -# 375 295 35 245 -# 376 345 35 295 -# 378 385 35 335 -

GUIDE RAIL FOR GRATINGS AND RAILINGS

Made of polypropylen, for all fitting over flow channels, useful double-sided. For gratings with heigth of 22, 24 & 35 mm, fixed length 2,0 m, inside dimension 24 x 37 mm

Article Packing Code kgGuide Rail 25 379 0,56

510

510

159

07

07 M

ount

ing

Part

s

FORMWORK STONE• material: EPS• manufactured in accordance with

EN ISO 9001:2008• including inserter for end-stone:

25 pieces1 at XXL stones (height 50 cm) 50 pieces1 at L-stones (height 25 cm)

• compressive stress in accordance with EN 836: 150 kPa at 10 % compression

• Thermal conductivity according to EN 12667: 0,035 lambda (W/(m*K))

• divisible in steps of 25 cm

First formwork in the pool area in accordance with DIN EN 13163.

1 for a pool (depth 150 cm, 4 corners), when using the XXL stones (height 50 cm), 24 inserters are required, when using the L stones (height 25 cm), 48 inserters are required (8 pieces per layer). For additional corners, stairs or special shapes additional inserters are needed (against payment).

Article Dimensions Concrete capacity Density Color Packing Code kgFormwork stone PS30L 100 x 25 x 25 cm 30,20 l 30 g/l white 40 PS30L-M 1,00Formwork stone PS30XXL 125 x 50 x 25 cm 66,15 l 30 g/l white 16 PS30XXL-M 2,70Formwork stone PS40L 100 x 25 x 25 cm 30,20 l 40 g/l grey 40 PS40L-M 1,29Formwork stone PS40XXL 125 x 50 x 25 cm 66,15 l 40 g/l grey 16 PS40XXL-M 3,60inserter vor end-stone 14 x 8 x 4 cm – 30 g/l white 1 PE-E-M 0,01

Made in Germany

inserter for end-stone

160

07 MOUNTING PARTS

THE PERFECT LOOK In large measure the pool liners determine not only the pool look, but also the appearance of the entire pool area. The best way to get a long term waterproof and easy to clean swimming pool, into apply a reinforced swimming-pool membrane. Besides, numerous combinations and a wide color spectrum are conceivable. Color, shape, material, surface feel and appearance of the pool liner affect significantly the overall look and decide about the comfort factor.

FABRIC REINFORCED SWIMMING POOL LINERS SBG 150 SUPRA

Color Code kgWhite 20.049 80,44Adriatic blue 20.410 80,44Light blue 20.052 80,44Sand 20.051 80,44Grey 20.055 80,44Anthracite 20.786 80,44

Color Code kgWhite 20.048 97,50Adriatic blue 20.409 97,50Light blue 20.053 97,50Sand 20.054 97,50Anthracite 20.910 97,50

With high-quality surface protection, more stable / resistant against dirt and discoloration, antimicrobial equipped, stable against UV radiation, cold-resistant, tear-resistant and durable.

ROLL-SIZE 25 m (length) x 1,65 m (width) ROLL-SIZE 25 m (length) x 2,00 m (width)

FABRIC REINFORCED SWIMMING POOL LINER SBG 150The fabric reinforced swimming pool liners are an ideal material for the lining of station-ary pools of all sizes and shapes for indoor and outdoor use. Extremely tearproof, durable and resistant to weathering, cold, fungus and bacteria. Suitable for any stable surface.

Color Code kgWhite 20.045 80,44Adriatic blue 20.061 80,44Light blue 20.403 80,44Sand 20.405 80,44Grey 20.073 80,44Anthracite 20.529 80,44Black 20.579 80,44

Color Code kgWhite 20.047 97,50Adriatic blue 20.063 97,50Light blue 20.404 97,50Sand 20.406 97,50Grey 20.072 97,50

ROLL-SIZE 25 m (length) x 2,00 m (width)ROLL-SIZE 25 m (length) x 1,65 m (width)

AVAILABLE COLORS - UNICOLORFor technical reasons, color variations are possible.

LIGHT BLUE Grey ANTHRACITE BLACKWHITE ADRIATIC BLUE

SAND

SURFACE-COATED

510

DIMENSIONSThickness: 1,5 mmWidth: 1,65 / 2,00 mRoll length: 25 mPacking unit: 8 rolls/pallet

510

DIMENSIONSThickness: 1,5 mmWidth: 1,65 / 2,00 mRoll length: 25 mPacking unit: 8 rolls/pallet

Made in Germany

Made in Germany

161

07

07 M

ount

ing

Part

sThe mother of pearl effect ensures - depending on the light, source or degree of illumination - for a uniquely vibrant and colorful iridescent play of colors. PHOTO: WHITE PEARL

For technical reasons, color variations are possible.

Swimming pool membranes with a very nice pecatescent refelction effect. By day through the sunlight, by night through underwater lights.

FABRIC REINFORCED SWIMMING POOL LINERSPRINTED ”PEARL-REFLECTION-DESIJUS“

WHITE PEARL BLACK PEARL BLUE PEARL SAND PEARL

DIMENSIONSThickness: 1,6 mmWidth: 1,65 mRoll length: 25 mPacking unit: 8 rolls/pallet

510

Color Code kgwhite pearl 20.787 80,44black pearl 20.776 80,44blue pearl 20.777 80,44sand pearl 20.984 80,44

ROLL-SIZE 25 m (length) x 1,65 m (width)

Made in Germany

162

07 MOUNTING PARTS

LIQUID PVCSeam sealer for fabric reinforced swimming pool linings. Package size: 950 ml (can). Also available separately.

Color Packing Code kgWhite 6 21.054 0,95Navy blue 6 21.047 0,95Adriatic blue 6 21.048 0,95Light blue 6 21.053 0,95Sand 6 21.056 0,95Grey 6 21.046 0,95Anthracite 6 21.154 0,95Black 6 21.190 0,95Transparent 6 21.055 0,95

PVC COATED METALS / PROFILES

Article Color Dimensions (mm) Code kgPanel blue 2000 x 1000 21.063 10,00External angle blue 70 x 30 x 2000 21.068 1,00Internal angle blue 70 x 30 x 2000 21.067 1,00Strip blue 70 x 2000 21.071 1,00

For the assembling of fabric reinforced swimming pool liningsThickness of liner composite panel: 1,2 mm

PACKINGpacking unit: 30/palletExterior angle, strips,Interior angle: packing unit: 10 / Pk

FABRIC REINFORCED ANTI SLIP MEMBRANEAnti slip protection for stairs and children pools

Color Code kgWhite 20.765 34,32Adriatic blue 20.772 34,32Light blue 20.768 34,32Sand 20.766 34,32Grey 20.767 34,32Anthracite 20.771 34,32Black 20.770 34,32

ROLL-SIZE 10 m (length) x 1,65 m (width) – (15 % expences for cutting for neaded length).

RETRACTOR

Article Code kgMobile retractor 2321 11,00

Mobile retractor for swimming pool liner, aluminium, total length: 6,30 m

510

DIMENSIONSThickness: 1,5 mmWidth: 1,65 mRoll length: 10 mPacking unit: 15 rolls/pallet

Length cut possible

163

07

07 M

ount

ing

Part

s

SEPARATION AND PROTECTION FLEECE / GEO TEXTILESeparation and protection fleece available in 300 g/m² and 500 g/m², thermally solidified polyester fibers, drilling and screw-proof, rot proof, vapor permeable, film and bitumen compatible, color: white. Also available separately.

Article Quality Packing Code kgFleece 300g/m² 6 rolls/pallet 20.500 22,5

SIZE: 1,50 METER – 75 m2

SIZE: 2,00 METER – 100 m2

Article Quality Packing Code kgFleece 300g/m² 6 rolls/pallet 20.501 30,00Fleece 500g/m² 6 rolls/pallet 20.502 50,00

DIMENSIONSThickness: 2 mm (300 g/m²)Thickness: 4 mm (500 g/m²)Width: 1,50 / 2,00 mRoll length: 50 m

510

Article Packing Code kg

Spray bottle, 500 ml 5 21.000

Drive fasteners short, 20,3 mm 12 pack (200 pieces) 21.381

Drive fasteners long, 35 mm 12 pack (100 pieces) 21.382

Non-woven adhesive, 5 kg 1 21.397

Contact adhesive F 143, 700 g 6 21.042

Welding agent THF, 1.000 ml 6 21.039

ACCESSORIES FOR PROFESSIONAL INSTALLATIONSwimming pools membranes can be used to house indoor and outdoor swimming pools in every pool shape and size. This applies to new construction as well as to the rehabilitation of existing swimming pools with subfloors made of concrete, walls, wood, steel, aluminum or polyester. The right accessory for laying is a must, so that the lining of the swimming pool is professionally executed.

NEW

21.000 21.381 21.382 21.397

21.042

21.039

164

07 MOUNTING PARTS

Article Code kg

Mounting set flange mounting for V4A ladders, 1 pair 119

Mounting set tilt joint with flange mounting V2A for V4A ladders, 1 pair 120

EQUIPMENT (FOR HOLM TIGHT CURVED AND HOLM WIDE CURVED)

LIFEGUARD CHAIRAnti slip ladder. Made of AISI 304 or 316 quality stainless steel and Ø 42 mm pipe.

Article Dimensions Max. weight of user

Packing Code kg

Lifeguard chair AISI 304

180 x 165 x 262 cm 90 kg 1 178 60

Lifeguard chair AISI 316

180 x 165 x 262 cm 90 kg 1 179 60

ACCESS LADDER (V4A/AISI 316)High quality stainless steel ladder (V4A/AISI 316), holm Ø 43 mm, highly polished stainless steel, steps with anti-slip characteristics, incl. accessories.

HOLM TIGHT CURVED HOLM WIDE CURVED

ACCESS LADDERS V4A/AISI 316

Steps a (mm) Code kg2 696 31124 10,03 946 31132 12,04 1196 31140 13,25 1446 31157 14,0

Steps a (mm) Code kg2 696 11928 10,03 946 11936 11,84 1196 11944 13,05 1446 11951 14,0

Example 3-stage Example 3-stage

165

07

07 M

ount

ing

Part

s

Steps a (mm) Code kg2 515 21869 14,53 765 21877 15,54 1015 21885 16,55 1265 21893 17,5

Steps Code kg

5 525 65,0

6 526 72,0

7 527 85,0

ACCESS LADDER (V4A/AISI 316)

2-SECTION LADDER (V4A/AISI 316)High quality 2-section stainless steel ladder (V4A/AISI 316), holm Ø 43 mm, highly polished stainless steel, steps with anti-slip characteristics, incl. accessories

The stainless steel ladder is suitable for rehabilitation pool, as well as for swimmers with physical disabilities. The height of the staircase can be adapted to local conditions. Anti-slip steps with specific dimensions 657 x 350 mm.

2-SECTION LADDER

Type a (mm) b (mm)5 Steps 1100-1340 16006 Steps 1350-1590 18507 Steps 1600-1800 2100

DIMENSION ACCESS LADDER

Example 3-stage

166

07 MOUNTING PARTS

Version number of steps

max. burden

Code kg

Holm tight curved

2 120 kg 510-N 10,0

Holm tight curved

3 120 kg 511-N 11,8

Holm tight curved

4 120 kg 512-N 13,2

Holm tight curved

5 120 kg 513-N 14,0

2-SECTION LADDER (V2A/AISI 304) ACCORDING TO DIN EN 16582-12-SECTION

High quality 2-section stainless steel ladder (V2A/AISI 304), highly polished stainless steel, holm Ø 43 mm, with all accessories, holm distance: 500 mm, distance to the wall: 144 mm, step distance: 265 mm (Distance ground to first stage 250 mm), both parts with flange mounting, stainless steel non-slip steps.

Article number of steps max. burden Code kg

Access Ladder 3 120 kg 531-U 22,5Access Ladder 4 120 kg 532-U 23,5

Version number of steps

max. burden

Code kg

Holm wide curved

2 120 kg 520-W 10,0

Holm wide curved

3 120 kg 521-W 11,8

Holm wide curved

4 120 kg 522-W 13,2

Holm wide curved

5 120 kg 523-W 10,4

ACCESS LADDERS V2A/AISI 304

ACCESS LADDER (V2A/AISI 304) ACCORDING TO DIN EN 16582-1Highly polished stainless steel V2A/AISI 304, holm Ø 43 mm, with all accessories, holm distance: 500 mm, distance to the wall: 144 mm, step distance: 265 mm (Distance ground to first stage 250 mm), stainless steel non-slip steps.

HOLM TIGHT CURVED HOLM WIDE CURVED

Article Code kg

Mounting set flange mounting AISI 304, 1 pair for ladders tight and curved 510

EQUIPMENT (FOR HOLM TIGHT CURVED AND HOLM WIDE CURVED)

Example 3-stage Example 3-stage

Example 3-stage

167

07

07 M

ount

ing

Part

s

Pool height number of steps max. burden Code kg1,00 m 3/3 120 kg 515-H 18,01,20 m 4/4 120 kg 516-H 20,51,50 m 5/5 120 kg 517-H 23,81,20 m 4/1 120 kg 518-H 16,01,50 m 5/1 120 kg 519-H 19,5

Conversion-Sets (single sided) adapt to DIN EN 16582-1 Code kg

Conversion-Set Folding Lock for High Pool Ladders with 3 steps 5910 8,0



* To comply with DIN EN 16582-1: Coversion required

Pool height number of steps

max. burden Code kg

1,00 m 3 120 kg 515-HD 20,5

1,20 m 4 120 kg 516-HD 23,5

1,50 m 5 120 kg 517-HD 26,8

LADDER HANDLE ARCH (V2A/AISI 304)Height 850 mm, 1200 mm outreach, holm Ø 43 mm, stainless steel V2A/AISI 304 polished

Article Packing Code kgLadder handle arch 12 510.1 5,5

HIGH POOL LADDER (V2A/AISI 304) ACCORDING TO DIN EN 16582-1*Highly polished stainless steel V2A/AISI 304, holm Ø 43 mm, with anti-slip steps and platform made of plastic, 500 mm wide.

HIGH POOL SAFETY LADDER ACCORDING TO DIN EU NORMcomplete with folding part

Steps: 4/4 Steps: 4/1

07 - midas pool products · mounting parts skimmers, ... stainless steel, gunmetal and bronze. ......

Documents