09/2021 - iss.rs

09/2021

2021

,

-

3

5

18

19

(CEN)

2021 21

2021 30

2021 39

(CENELEC)

2021 47

2021 53

2021 57

(ETSI)

62

(ISO)

2021 64

2021 74

(I C)

2021 86

2021 91

3

5

18

19

9/2021

www.iss.rs 3

a

www.iss.rs.

,

,

http://www.iss.rs/

9/2021

4 www.iss.rs

1. Величине, јединице, симболи и сл.

SRPS EN ISO 80000-3:2021,

A :

ISO 80000-

2. КОЗМЕТИЧКО-ХЕМИЈСКИ ПРОИЗВОДИ

SRPS EN ISO 22716:2011,

A :

3. ХРАПАВОСТ ПОВРШИНА, ТОЛЕРАНЦИЈА МЕРА И ОБЛИКА

SRPS EN ISO 9222-1:2011,

A :

SRPS EN ISO 9222-2:2011,

A :

9/2021

www.iss.rs 5

. 3187/42-51-02/2021

30. .

I

o

:

1. ЗАШТИТА ОД ПОЖАРА

SRPS EN 54-1 (en),

SRPS EN 54-1:2012 (en),

2. ХЕМИКАЛИЈЕ ЗА ПРЕЧИШЋАВАЊЕ ВОДЕ

SRPS EN 1018 (en), -

SRPS EN 1018:2015 (en), -

3. ИСПИТИВАЊЕ ФИЗИЧКИХ СВОЈСТАВА ВОДЕ

SRPS EN ISO 13162 (en),

SRPS EN ISO 13162:2016 (en),

4. ХЕМИЈСКЕ КАРАКТЕРИСТИКЕ ЗЕМЉИШТА


SRPS EN 16123:2014 (en),

SRPS EN ISO 12404:2016 (en),

5. ЗАШТИТА ЖИВОТНЕ СРЕДИНЕ


9/2021

6 www.iss.rs

SRPS ISO 14031:2016 (sr),

6. ОПРЕМА ЗА ТРАНСФУЗИЈУ, ИНФУЗИЈУ И ИНЈЕКЦИЈСКА ОПРЕМА


SRPS EN ISO 22413:2014 (en),

7. СИСТЕМИ ИСПИТИВАЊА ЗА ДИЈАГНОСТИКУ IN VITRO


In vitro -

SRPS EN ISO 17511:2008 (en),

in vitro -


in vitro -

SRPS CEN/TS 16945:2016 (en),

in vitro -

8. СТЕРИЛИЗАЦИЈА И ДЕЗИНФЕКЦИЈА УОПШТЕ


--

SRPS EN ISO 14160:2012 (en),

--

9. БИОЛОШКО ВРЕДНОВАЊЕ МЕДИЦИНСКИХ СРЕДСТАВА

SRPS EN ISO 10993-12 (en),

-

SRPS EN ISO 10993-12:2014 (en),

12: -

10. ПОМОЋНА СРЕДСТВА И ПРИЛАГОЂАВАЊЕ КРЕТАЊУ


SRPS EN ISO 11199-1:2008 (en),

9/2021

www.iss.rs 7


SRPS EN ISO 11199-2:2008 (en),

11. СТОМАТОЛОШКA ОПРЕМА


-

SRPS EN ISO 3630-3:2017 (en),

-

12. ЦЕВОВОДИ И ЕЛЕМЕНТИ ЦЕВОВОДА

SRPS EN 14917 (en),

SRPS EN 14917:2012 (en),

13. ИНСТАЛАЦИЈЕ У ЗГРАДАМА

SRPS EN 303-5 (en),

500 kW

SRPS EN 303-5:2016 (sr),

500 kW

14. ПОСУДЕ ЗА СКЛАДИШТЕЊЕ ФЛУИДА


SRPS EN ISO 14245:2020 (en),


SRPS EN ISO 15995:2020 (en),

15. ОПРЕМА ЗА РУКОВАЊЕ НАФТНИМ ПРОИЗВОДИМА И ПРИРОДНИМ ГАСОМ

SRPS EN 1473 (en),

SRPS EN 1473:2016 (en),

16. ЛИФТОВИ – ПОКРЕТНЕ СТЕПЕНИЦЕ

SRPS EN 81-22 (en),

9/2021

8 www.iss.rs

SRPS EN 81-22:2014 (en),

SRPS EN 81-70 (en),

SRPS EN 81-70:2018 (en),

SRPS EN 115-2 (en),

SRPS EN 115-2:2011 (en),

17. ВУЧЕНА ВОЗИЛА

SRPS EN 16116-2 (en),

SRPS EN 16116-2:2015 (en),

18. МИНЕРАЛНИ МАТЕРИЈАЛИ И ПРОИЗВОДИ

SRPS EN 16301 (en),

-

SRPS EN 16301:2014 (en),

-

19. ВРАТА И ПРОЗОРИ

SRPS EN 14500 (en),

SRPS EN 14500:2009 (en),

SRPS EN 14501 (en),

-

SRPS EN 14501:2008 (en),

-

20. МИКРОБИОЛОГИЈА ХРАНЕ


- - Staphylococcus

aureus -

9/2021

www.iss.rs 9

SRPS EN ISO 6888-1:2009 (sr),

-

(Staphylococcus aureus --

SRPS EN ISO 6888-1:2009/ A2:2018 (en),

-

(Staphylococcus aureus -- -


-- Staphylococcus

aureus

SRPS EN ISO 6888-2:2009 (sr),

-

(Staphylococcus aureus -

21. УЉА И МАСТИ БИЉНОГ И ЖИВОТИЊСКОГ ПОРЕКЛА


SRPS EN ISO 6321:2009 (sr),

22. СЕНЗОРСКЕ АНАЛИЗЕ


SRPS EN ISO 4120:2012 (sr),

SRPS EN ISO 4120:2012 (en),

23. КОРОЗИЈА МЕТАЛА


SRPS EN ISO 7539-9:2012 (en),

24. НАФТНИ ПРОИЗВОДИ УОПШТЕ

SRPS EN 15199-4 (en),

SRPS EN 15199-4:2016 (en),

9/2021

10 www.iss.rs

25. ЧЕЛИЦИ


SRPS EN ISO 15349-2:2012 (en),

26. ЧЕЛИЦИ ПОГОДНИ ЗА ТЕРМИЧКУ ОБРАДУ


SRPS EN 10085:2012 (en),

27. ЧЕЛИЦИ ЗА РАД ПОД ПРИТИСКОМ

SRPS EN 10222-2 (en),

SRPS EN 10222-2:2017 (en),

SRPS EN 10222-4 (en),

SRPS EN 10222-4:2017 (en),

28. НЕРЂАЈУЋИ ЧЕЛИЦИ

SRPS EN 10250-4 (en),

SRPS EN 10250-4:2012 (en),

SRPS EN 10253-2 (en),

SRPS EN 10253-2:2011 (en),

29. ОПРЕМА ЗА СКЛАДИШТЕЊЕ

SRPS EN 15620 (en),

SRPS EN 15620:2011 (en),

30. ПРОИЗВОДИ ОД АЛУМИНИЈУМА

SRPS EN 1706 (en),

9/2021

www.iss.rs 11

SRPS EN 1706:2020 (en),

SRPS EN 1706:2020 (sr),

31. ИСПИТИВАЊЕ БЕЗ РАЗАРАЊА


SRPS EN ISO 3452-1:2014 (en),

SRPS EN ISO 3452-1:2014 (sr),


SRPS EN ISO 3452-2:2014 (en),

SRPS EN ISO 3452-2:2014 (sr), 2:

32. ВАЗДУХОПЛОВСТВО

SRPS EN 2854-003 (en),

55 °C

SRPS EN 2854-003:2012 (en),

2

55 °C °C

SRPS EN 4700-002 (en),

SRPS EN 4700-002:2017 (en),

002:

33. МЕТАЛНИ ФИТИНЗИ

SRPS EN 1254-1 (en),

-

SRPS EN 1254-1:2009 (en),

-


SRPS EN 1254-2:2009 (en),


SRPS EN 1254-3:2009 (en),

9/2021

12 www.iss.rs


SRPS EN 1254-4:2009 (en),


SRPS EN 1254-5:2009 (en),


SRPS EN 1254-6:2014 (en),


SRPS EN 1254-8:2014 (en),

-

34. ПРОИЗВОДИ ОД БАКРА

SRPS EN 13601 (en),

SRPS EN 13601:2016 (sr),

SRPS EN 13605 (en),

SRPS EN 13605:2016 (sr),

35. МЕТАЛНЕ ПРЕВЛАКЕ

SRPS EN 13603 (en),

SRPS EN 13603:2014 (en),

9/2021

www.iss.rs 13

II

1. МРЕЖЕ ЗА ПРЕНОС И ДИСТРИБУЦИЈУ ЕЛЕКТРИЧНЕ ЕНЕРГИЈЕ

SRPS EN 50110-2 (en),

2. ЕНЕРГЕТСКИ КОНДЕНЗАТОРИ

SRPS EN IEC 63210 (en),

3. ЦЕВИ ЗА ЕЛЕКТРИЧНЕ СВРХЕ

SRPS EN 61534-1:2011/A2 (en),

SRPS EN 61534-1:2011/A11 (en), 11

SRPS EN IEC 61386-21 (en),

SRPS EN IEC 61386-21:2021/A11 (en),


SRPS EN IEC 61386-22:2021/A11 (en), 2


SRPS EN IEC 61386-23:2021/A11 (en), 3

4. НИСКОНАПОНСКЕ РАСКЛОПНЕ АПАРАТУРЕ



5. ОСИГУРАЧИ И ДРУГЕ НАПРАВЕ ЗА ЗАШТИТУ ОД ПРЕКОМЕРНЕ СТРУЈЕ

SRPS EN 60898-2 (en),

SRPS EN IEC 63052 (en),

SRPS HD 62640:2015/A12 (en), --

6. УРЕЂАЈИ ЗА СПАЈАЊЕ

SRPS EN 61995-1:2010/A11 (en),

9/2021

14 www.iss.rs

7. ОЦЕЊИВАЊЕ УСАГЛАШЕНОСТИ

SRPS EN ISO/IEC 17000 (sr, en),

8. ИСПИТИВАЊЕ ФИЗИЧКИХ СВОЈСТАВА ВОДЕ

SRPS EN ISO 22515 (en), -55

9. АКУСТИКА И АКУСТИЧКА МЕРЕЊА

SRPS ISO 20906 (sr),

10. СТЕРИЛИЗАЦИЈА И ДЕЗИНФЕКЦИЈА УОПШТЕ

SRPS EN ISO 11737-1:2018/A1 (en), -

11. ЗАШТИТНА ОПРЕМА ЗА ГЛАВУ


12. СТОМАТОЛОШКИ ИНСТРУМЕНТИ



13. ЦЕВОВОДИ И ЕЛЕМЕНТИ ЦЕВОВОДА

SRPS EN 13480-3:2017/A1 (en), 1

SRPS CEN/TS 12007-6 (en),

--U)

14. ОПРЕМА ЗА РУКОВАЊЕ НАФТНИМ ПРОИЗВОДИМА И ПРИРОДНИМ ГАСОМ

SRPS EN ISO 20257-2 (en), -

15. КОТРЉАЈНИ ЛЕЖАЈИ

SRPS ISO 10317 (sr), -

16. ИНЖЕЊЕРСТВО ШИНСКОГ САОБРАЋАЈА УОПШТЕ

SRPS EN 17168 (en),

17. ОПРЕМА ЗА ГРАЂЕЊЕ

SRPS EN 12609 (en),

9/2021

www.iss.rs 15

18. МЛЕКО И ПРИЗВОДИ ОД МЛЕКА УОПШТЕ

SRPS CEN ISO/TS 23758 (en),

19. УЉА И МАСТИ БИЉНОГ И ЖИВОТИЊСКОГ ПОРЕКЛА

SRPS EN ISO 18363-4 (en), -

2-MCPD, 3- -MS/MS

20. ОСТАЛЕ МЕТОДЕ ИСПИТИВАЊА МЕТАЛА

SRPS EN ISO 642 (sr),

21. ПРОИЗВОДИ ОД АЛУМИНИЈУМА

SRPS EN 1676 (sr),

22. ИСПИТИВАЊЕ БЕЗ РАЗАРАЊА

SRPS EN 12679 (sr),

SRPS EN ISO 16526-1 (sr), -

SRPS EN ISO 16526-3 (sr), -

23. ЧЕЛИЦИ

SRPS EN 10373 (en),

24. ВАЗДУХОПЛОВСТВО

SRPS EN 4866 (en),

25. МЕТАЛНИ ФИТИНЗИ

SRPS EN 1254-7 (en), -

SRPS EN 1254-20 (en), -

9/2021

16 www.iss.rs

III

. 1. МЕХАНИЧКЕ КОНСТРУКЦИЈЕ ЗА ЕЛЕКТРОНСКУ ОПРЕМУ

SRPS HD 391 S3:2008 (en),

2. СИСТЕМИ НАПАЈАЊА ЕЛЕКТРИЧНОМ ЕНЕРГИЈОМ

SRPS HD 60364-7-722:2017 (sr), - -

3. КАБЛОВИ

SRPS EN 60332-3-10:2010 (en), -

SRPS EN 60332-3-21:2010 (en), -

SRPS EN 60332-3-22:2010 (en), -

SRPS EN 60332-3-23:2010 (en), -

SRPS EN 60332-3-24:2010 (en), -

SRPS EN 60332-3-25:2010 (en), -

4. ГОРИОНИЦИ – КОТЛОВИ

SRPS EN 12514-1:2011 (en),

SRPS EN 12514-2:2011 (en),

9/2021

www.iss.rs 17

5. ЦЕМЕНТ – ГИПС – КРЕЧ – МАЛТЕР

SRPS B.B6.011:1982 (sr),

6. МАШИНЕ ЗА ОБРАДУ ДРВЕТА

SRPS EN 1218-1:2011 (en),

SRPS EN 1218-2:2010 (en),

-

SRPS EN 1218-5:2010 (en),

9/2021

18 www.iss.rs

1. ГОРИОНИЦИ – КОТЛОВИ

SRPS EN 12514:2021/AC (en),

:

1. ОСИГУРАЧИ И ДРУГЕ НАПРАВЕ ЗА ЗАШТИТУ ОД ПРЕКОМЕРНЕ СТРУЈЕ

SRPS EN 50550:2011/ AC:2012 (en),

2. НИСКОНАПОНСКЕ РАСКЛОПНЕ АПАРАТУРЕ

SRPS EN 61439-1:2018/ Ispr. 1:2019 (sr),

9/2021

www.iss.rs 19

[email protected].

СРПСКИ СТАНДАРДИ КОЈИ ЋЕ СЕ ПОВУЋИ

KS U189,

1. SRPS B.D8.070:2016 (sr),

2. SRPS B.D8.080:2016 (sr),

mailto:[email protected].

(CEN)

2021 21

2021 30

2021 39

(CENELEC)

2021 47

2021 53

2021 57

(ETSI)

62

9/2021

www.iss.rs 21

(CEN)

2021

:

2021

1. CEN/CLC/JTC 5 – Space

prCEN/TR 17603-32-21 Space engineering Adhesive bonding handbook 2021-09-08

prCEN/TR 17603-32-22 Space engineering Insert design handbook 2021-09-08

prCEN/TR 17603-32-23 Space engineering Threaded fasteners handbook 2021-09-08

prCEN/TR 17603-32-24 Space engineering Buckling of structures 2021-09-08

prCEN/TR 17603-32-25 Space engineering Mechanical shock design and verification handbook

2021-09-08

prCEN/TR 17603-32-26 Space engineering Spacecraft mechanical loads analysis handbook

2021-09-08

prCEN/TR 17603-40 Space engineering Software engineering handbook 2021-09-08

prCEN/TR 17603-40-01 Space engineering Agile software development handbook

2021-09-08

prCEN/TR 17603-50 Space engineering Communication guidelines 2021-09-08

2. CEN/CLC/JTC 13 – Cybersecurity and Data Protection

WI JT013043 (WI=JT013043)

Multi-layered approach for a set of requirements for information/cyber security controls for Cloud Services

2021-09-08

WI JT013044 (WI=JT013044)

Requirements for Conformity Assessment Bodies certifying Cloud Services

2021-09-08

3. CEN/SS F05 – Measuring Instruments

prEN ISO 5167-5 rev Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 5: Cone meters

2021-09-09

9/2021

22 www.iss.rs

2021

prEN ISO 5167-6 rev Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 6: Wedge meters

2021-09-09

4. CEN/TC 19 – Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin

prEN 16709 rev Automotive fuels High FAME diesel fuel (B20 and B30) Requirements and test methods

2021-09-09

5. CEN/TC 33 – Doors, windows, shutters, building hardware and curtain walling

EN 1527:2019 + A1:2021 Building hardware Hardware for sliding doors and folding doors Requirements and test methods

2021-09-23

6. CEN/TC 55 – Dentistry

prEN ISO 7405 rev Dentistry Evaluation of biocompatibility of medical devices used in dentistry

2021-09-07

prEN ISO 18397 rev Dentistry Powered scaler 2021-09-07

prEN ISO 20749 rev Dentistry Pre-capsulated dental amalgam 2021-09-15

prEN ISO 20896-1 rev Dentistry Digital impression devices Part 1: Methods for assessing accuracy

2021-09-07

7. CEN/TC 89 – Thermal performance of buildings and building components

prEN ISO 9288 rev Thermal insulation Heat transfer by radiation Physical quantities and definitions

2021-09-22

8. CEN/TC 92 – Water meters

prEN ISO 4064-1 rev Water meters for cold potable water and hot water Part 1: Metrological and technical requirements (ISO 4064-1:2014)

2021-09-02

prEN ISO 4064-2 rev Water meters for cold potable water and hot water Part 2: Test methods (ISO 4064-2:2014)

2021-09-03

9. CEN/TC 107 – Prefabricated district heating and district cooling pipe system

EN 13941-1:2019 + A1:2021 District heating pipes Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks Part 1: Design

2021-09-21

9/2021

www.iss.rs 23

2021

EN 13941-2:2019 + A1:2021 District heating pipes Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks Part 2: Installation

2021-09-21

10. CEN/TC 121 – Welding and allied processes

prEN ISO 12224-1 rev Solder wire, solid and flux cored Specification and test methods Part 1: Classification and perfor-mance requirements

2021-09-16

prEN ISO 12224-2 rev Flux cored solder wire Specification and test methods Part 2: Determination of flux content

2021-09-16

11. CEN/TC 122 – Ergonomics

prCEN ISO/IEC TR 25060 rev Systems and software engineering Systems and software product Quality Requirements and Eva-luation (SQuaRE) Common Industry Format (CIF) for usability: General framework for usability- -related information

2021-09-22

12. CEN/TC 127 – Fire safety in buildings

prEN 1366-8 rev Fire resistance tests for service installations Part 8: Smoke extraction ducts

2021-09-20

prEN 1366-9 rev Fire resistance tests for service installations Part 9: Single compartment smoke extraction ducts

2021-09-20

prEN 15269-2 rev Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 2: Fire resistance of hinged and pivoted steel doorsets

2021-09-21

13. CEN/TC 133 – Copper and copper alloys

prEN 12163 rev Copper and copper alloys Rod for general purposes 2021-09-06

prEN 12164 rev Copper and copper alloys Rod for free machining purposes

2021-09-06

prEN 12165 rev Copper and copper alloys Wrought and unwrought forging stock

2021-09-06

prEN 12166 rev Copper and copper alloys Wire for general purposes 2021-09-06

prEN 12167 rev Copper and copper alloys Profiles and bars for general purposes

2021-09-06

prEN 12168 rev Copper and copper alloys Hollow rod for free machining purposes

2021-09-06

prEN 12420 rev Copper and copper alloys Forgings 2021-09-06

9/2021

24 www.iss.rs

2021

14. CEN/TC 134 – Resilient, textile and laminate

floor coverings

EN ISO 26986:2012/prA1 Resilient floor coverings Expanded (cushioned) poly(vinyl chloride) floor covering Specification (ISO 26986:2010)

2021-09-14

15. CEN/TC 136 – Sports, playground and

other recreational facilities and equipment

EN 1177:2018 + AC:2019/ prA1

Impact attenuating playground surfacing Methods of test for determination of impact attenuation

2021-09-17

prEN 16474 rev Plastics and rubber machines Tyre curing machines Safety requirements

2021-09-20

16. CEN/TC 145 – Plastics and rubber machines

WI 162468 (WI=162468)

Protective clothing against solid airborne particles including radioactive contamination Part 3: Requ-irements and test methods for chemical protective suit combined with powered filtering devices, pro-tecting the body and the respiratory tract

2021-09-23

prCEN ISO/TR 8546 Hand protection Guide for Selection and use 2021-09-22

prEN ISO 22615 Protective clothing Performance requirements and test methods for protective clothing against infective agents

2021-09-22

17. CEN/TC 164 – Water supply

prEN 973 rev Chemicals used for treatment of water intended for human consumption Sodium chloride for regeneration of ion exchangers

2021-09-01

prEN 1302 rev Chemicals used for treatment of water intended for human consumption Aluminium-based coagulants

Analytical methods

2021-09-01

prEN 1405 rev Chemicals used for treatment of water intended for human consumption Sodium alginate

2021-09-01

prEN 1407 rev Chemicals used for treatment of water intended for human consumption Anionic and non-ionic polyacrylamides

2021-09-01

prEN 1408 rev Chemicals used for treatment of water intended for human consumption Poly (diallyldimethyl-ammonium chloride)

2021-09-01

prEN 1409 rev Chemicals used for water treatment intended for human consumption Polyamines

2021-09-01

9/2021

www.iss.rs 25

2021

prEN 1410 rev Chemicals used for treatment of water intended for human consumption Cationic polyacrylamides

2021-09-01

prEN 12122 rev Chemicals used for treatment of water intended for human consumption Ammonia solution

2021-09-01

18. CEN/TC 170 – Ophthalmic optics

prEN ISO 10943 rev Ophthalmic instruments Indirect ophthalmoscopes 2021-09-22

19. CEN/TC 185 – Fasteners

prEN ISO 3506-6 Fasteners Mechanical properties of corrosion-resistant stainless steel fasteners Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners

2021-09-21

20. CEN/TC 205 – Non-active medical devices

prEN ISO 24072 Aerosol bacterial retention test method for air-inlet on administration devices

2021-09-20

21. CEN/TC 211 – Acoustics

prEN ISO 17201-6 Acoustics Noise from shooting ranges Part 6: Sound pressure measurements close to the source for determining exposure to sound

2021-09-17

prEN ISO 26101-1 Acoustics Test methods for the qualification of the acoustic environment Part 1: Qualification of free-field environments

2021-09-09

prEN ISO 26101-2 Acoustics Test methods for the qualification of the acoustic environment Part 2: Determination of the environmental correction

2021-09-22

22. CEN/TC 216 – Chemical disinfectants and antiseptics

WI 216139 (WI=216139)

English title: Chemical disinfectants and antiseptics Quantitative test method for the evaluation of

sporicidal activity against Clostridioides difficile on non-porous surfaces with mechanical action employing wipes in the medical area (4- field test) Test method and requirements (phase 2, step 2)

2021-09-07

WI 216140 (WI 216140)

Chemical disinfectants and antiseptics Interpre-tation of water controls in EN 16615: 2015

2021-09-09

23. CEN/TC 230 – Water analysis

prEN ISO 9308-2 rev Water quality Enumeration of Escherichia coli and coliform bacteria Part 2: Most probable number method

2021-09-22

9/2021

26 www.iss.rs

2021

24. CEN/TC 235 – Gas pressure regulators and associated safety devices for use in gas transmission and distribution

EN 334:2019/prA1 Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)

2021-09-13

25. CEN/TC 238 – Test gases, test pressures, appliance categories and gas appliance types

prCEN/TR 1404 Determination of emissions from appliances burning gaseous fuel during tape-testing

2021-09-17

prCEN/TR 1472 General guidance for the marking of gas appliances 2021-09-20

26. CEN/TC 243 – Cleanroom technology

prEN ISO 14644-5 rev Cleanrooms and associated controlled environments Part 5: Operations (ISO 14644-5:2004)

2021-09-06

27. CEN/TC 248 – Textiles and textile products

prEN 14682 rev Safety of children's clothing Cords and drawstrings on children's clothing Specifications

2021-09-09

28. CEN/TC 249 – Plastics

WI 00249A0K (WI=00249A0K)

Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors Classifica-tion, requirements and test methods Part 2: PVC-U profiles covered with foils bonded with adhesives

2021-09-20

29. CEN/TC 250 – Structural Eurocodes

WI 250223 (WI=250223)

EN 1993-3 Eurocode 3 Design of steel structures Part 3: Towers, masts and chimneys

2021-09-14

prEN 1993-1-6 rev Eurocode 3 Design of steel structures Part 1-6: Strength and Stability of Shell Structures

2021-09-14

prEN 1993-1-7 rev Eurocode 3 Design of steel structures Part 1-7: Plated structures subject to out of plane loading

2021-09-14

prEN 1993-4-1 rev Eurocode 3 Design of steel structures Part 4-1: Silos

2021-09-14

prEN 1993-4-2 rev Eurocode 3 Design of steel structures Part 4-2: Tanks

2021-09-14

prEN 1993-5 rev Eurocode 3 Design of steel structures Part 5: Piling

2021-09-14

prEN 1993-6 rev Eurocode 3 Design of steel structures Part 6: Crane supporting structures

2021-09-14

9/2021

www.iss.rs 27

2021

30. CEN/TC 262 – Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys

prEN ISO 9717 rev Metallic and other inorganic coatings Phosphate conversion coating of metals

2021-09-13

31. CEN/TC 264 – Air quality

prEN 14211 rev Ambient air Standard method for the measu-rement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence

2021-09-06

prEN 14212 rev Ambient air Standard method for the measu-rement of the concentration of sulphur dioxide by ultraviolet fluorescence

2021-09-06

prEN 14625 rev Ambient air Standard method for the measu-rement of the concentration of ozone by ultraviolet photometry

2021-09-06

prEN 14626 rev Ambient air Standard method for the measu-rement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

2021-09-06

prEN 14662-1 rev Ambient air Standard method for the measu-rement of benzene concentrations Part 1: Pumped sampling followed by thermal desorption and gas chromatography

2021-09-06

32. CEN/TC 285 – Non-active surgical implants

prEN ISO 7197 rev Neurosurgical implants Sterile, single-use hydro-cephalus shunts and components

2021-09-15

33. CEN/TC 287 – Geographic Information

prEN ISO 19144-2 Geographic information Classification systems Part 2: Land Cover Meta Language (LCML)

2021-09-14

34. CEN/TC 298 – Pigments and extenders

prEN ISO 23157 Determination of the silanol group content on the surface of fumed silica Reaction gas chromato-graphic method

2021-09-20

35. CEN/TC 305 – Potentially explosive atmos-pheres – Explosion prevention and protection

WI 305158 (WI=305158)

Screw conveyors explosion isolation systems 2021-09-08

prCEN/TR 15281 rev Guidance on Inerting for the Prevention of Explosions 2021-09-08

prEN 14986 rev Design of fans working in potentially explosive atmospheres

2021-09-13

9/2021

28 www.iss.rs

2021

36. CEN/TC 307 – Oilseeds, vegetable and animal fats and oils and their by-products – Methods of sampling and analysis

prEN ISO 12872 rev Olive oils and olive-pomace oils Determination of the 2-glyceryl monopalmitate content

2021-09-22

37. CEN/TC 331 – Postal services

prEN 14534 rev Postal services Quality of service Measurement of the transit time of end-to-end services for bulk mail

2021-09-21

38. CEN/TC 346 – Conservation of Cultural Heritage

WI 346056 (WI=346056)

Conservation of cultural heritage Desalination of porous inorganic materials by poultices

2021-09-21

39. CEN/TC 351 – Construction Products – Ass-essment of release of dangerous substances

WI 351056 (WI=351056)

Construction products: Assessment of release of dangerous substances Pros and cons of methods for communicating the potential release of dangerous substances into soil, groundwater or surface water and indoor air

2021-09-01

40. CEN/TC 392 – Cosmetics

EN ISO 11930:2019/prA1 Cosmetics Microbiology Evaluation of the antimicrobial protection of a cosmetic product Amendment 1

2021-09-15

EN ISO 16212:2017/prA1 Cosmetics Microbiology Enumeration of yeast and mould Amendment 1

2021-09-15

EN ISO 18415:2017/prA1 Cosmetics Microbiology Detection of specified and non-specified microorganisms Amendment 1

2021-09-15

EN ISO 18416:2015/prA1 Cosmetics Microbiology Detection of Candida albicans Amendment 1

2021-09-15

EN ISO 21149:2017/prA1 Cosmetics Microbiology Enumeration and detec-tion of aerobic mesophilic bacteria Amendment 1

2021-09-15

EN ISO 21150:2015/prA1 Cosmetics Microbiology Detection of Escherichia coli Amendment 1

2021-09-15

EN ISO 22717:2015/prA1 Cosmetics Microbiology Detection of Pseudo-monas aeruginosa Amendment 1

2021-09-15

EN ISO 22718:2015/prA1 Cosmetics Microbiology Detection of Staphylo-coccus aureus mendment 1

2021-09-15

9/2021

www.iss.rs 29

2021

41. CEN/TC 430 – Nuclear energy, nuclear

technologies, and radiological protection

prEN ISO 20785-3 rev Dosimetry for exposures to cosmic radiation in civilian aircraft Part 3: Measurements at aviation altitudes

2021-09-22

42. CEN/TC 438 – Additive Manufacturing

prCEN ISO/ASTM TR 52913-1 Additive manufacturing Feedstock materials Part 1: Parameters for characterization of powder flow properties

2021-09-20

prEN ISO/ASTM 52945 Additive manufacturing for Automotive Qualifi-cation principles Generic machine evaluation and specification of Key Performance Indicators for PBF-LB/M processes

2021-09-21

43. CEN/TC 444 – Test methods for environ-

mental characterization of solid matrices

prEN ISO 22036 Sludge, treated biowaste and soil Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)

2021-09-26

44. CEN/TC 459/SC 1 – Test methods for steel

(other than chemical analysis)

prEN ISO 148-1 rev Metallic materials Charpy pendulum impact test Part 1: Test method

2021-09-22

prEN ISO 148-2 rev Metallic materials Charpy pendulum impact test Part 2: Verification of testing machines

2021-09-22

prEN ISO 148-3 rev Metallic materials Charpy pendulum impact test Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

2021-09-22

45. CEN/TC 459/SC 10 – Steel tubes, and iron

and steel fittings

prEN 10284 rev Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems

2021-09-22

46. CEN/TC 464 – Small Craft

EN ISO 15083:2020/prA1 Small craft Bilge-pumping systems Amendment 1 2021-09-15

9/2021

30 www.iss.rs

2021

www.iss.rs,

1. ASD-STAN – Aerospace

prEN 3361 Aerospace series Steel X5CrNiCu15 5 (1.4545) Con-sumable electrode remelted Solution treated and precipitation treated Sheets and strips a ≤ 6mm

1 070 MPa ≤ Rm ≤ 1 220 MPa

2021-09-16

prEN 3364 Aerospace series Steel X5CrNiCu15 5 (1.4545) Consumable electrode remelted, softened Forging stocks a or D ≤ 300 mm

2021-09-16

prEN 3479 Aerospace series Steel X5CrNiCu15 5 (1.4545) Consumable electrode remelted Solution treated and precipitation treated Plates 6 mm < a ≤ 20 mm 1 070 MPa ≤ Rm ≤ 1 220 MPa

2021-09-16

prEN 4258 Aerospace series Metallic materials General organization of standardization Link between types of European Standards and their use

2021-09-16

prEN 4287 Aerospace series Aluminium alloy AL-P7010 Forging stock

2021-09-16

prEN 4902 Aerospace series Surface treatments Definitions and test methods

2021-09-16

prEN 4904 Aerospace series Steel 36NiCrMo16 1 000 MPa ≤ Rm ≤ 1 200 MPa Bars 100 ≤ D ≤ 250 mm

2021-09-16


prEN ISO 27007 Information security, cybersecurity and privacy pro-tection Guidelines for information security mana-gement systems auditing (ISO/IEC 27007:2020)

2021-09-02

http://www.iss.rs/

9/2021

www.iss.rs 31

3. CEN/SS S26 – Environmental management

prEN ISO 14015 Environmental management Guidelines for Environmental Due Diligence Assessment (ISO/DIS 14015:2021)

2021-09-09

4. CEN/TC 10 – Lifts, escalators and moving walks

prEN 81-43 Safety rules for the construction and installation of lifts Special lifts for the transport of persons and goods Part 43: Lifts for cranes

2021-09-09

5. CEN/TC 23 – Transportable gas cylinders

prEN 13322-1 Transportable gas cylinders Refillable welded steel gas cylinders Design and construction Part 1: Carbon steel

2021-09-23

6. CEN/TC 33 – Doors, windows, shutters, building hardware and curtain walling

prEN 14024 Metal profiles with thermal barrier Mechanical performance Requirements, proof and tests for assessment

2021-09-16

7. CEN/TC 38 – Durability of wood and wood-based products

prEN 113-3 Durability of wood and wood-based products Test method against wood destroying basidiomycetes Part 3: assessment of durability of wood-based panels

2021-09-09

8. CEN/TC 49 – Gas cooking appliances

prEN 30-1-2 Domestic cooking appliances burning gas Safety Part 1-2: Appliances having forced-convection ovens

2021-09-09

9. CEN/TC 58 – Safety and control devices for burners and appliances burning gaseous or liquid fuels

EN 13611:2019/prA1 Safety and control devices for burners and appli-ances burning gaseous and/or liquid fuels General requirements

2021-09-23

10. CEN/TC 69 – Industrial valves

prEN 15714-3 Industrial valves Actuators Part 3: Pneumatic part-turn actuators for industrial valves Basic requirements

2021-09-23

9/2021

32 www.iss.rs

prEN 15714-6 Industrial valves Actuators Part 6: Hydraulic linear actuators for industrial valves Basic requirements

2021-09-23


prEN ISO 15614-4 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 4: Finishing welding of aluminium castings (ISO/DIS 15614-4:2021)

2021-09-09

prEN ISO 15614-6 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys (ISO/DIS 15614-6:2021)

2021-09-09

12. CEN/TC 138 – Non-destructive testing

prEN ISO 18563-1 Non-destructive testing Characterization and veri-fication of ultrasonic phased array equipment Part 1: Instruments (ISO/DIS 18563-1:2021)

2021-09-02

13. CEN/TC 139 – Paints and varnishes

prEN 927-2 Paints and varnishes Coating materials and coating systems for exterior wood Part 2: Performance specification

2021-09-02

14. CEN/TC 144 – Tractors and machinery for agriculture and forestry

EN ISO 28139:2021/prA1 Equipment for crop protection Knapsack combus-tion engine-driven airblast sprayers Safety and environmental requirements and test methods Amendment 1 (ISO 28139:2019/DAM 1:2021)

2021-09-16

15. CEN/TC 160 – Protection against falls from height including working belts

prEN 353-2 Personal fall protection equipment Part 2: Guided type fall arresters including a flexible anchor line

2021-09-23

prEN 813 Personal fall protection equipment Sit harnesses 2021-09-23

16. CEN/TC 164 – Water supply

prEN 14944-1 Influence of cementitious products on water intended for human consumption Test methods Part 1: Influence of factory made cementitious products on organoleptic parameters

2021-09-02

9/2021

www.iss.rs 33

prEN 14944-3 Influence of cementitious products on water intended for human consumption Test methods Part 3: Migration of substances from factory-made cement-ititous products

2021-09-02

17. CEN/TC 166 – Chimneys

prEN 15287-1 Chimneys Design, installation and commissioning Part 1: Chimneys and connecting flue pipes for

non-room sealed combustion appliances

2021-09-16

prEN 15287-2 Chimneys Design, installation and commissioning Part 2: Chimneys and connecting flue pipes for

room sealed combustion appliances

2021-09-16

18. CEN/TC 172 – Pulp, paper and board

prEN ISO 5263-3 Pulps Laboratory wet disintegration Part 3: Disintegration of mechanical pulps at > 85°C (ISO/DIS 5263-3:2021)

2021-09-09

prEN ISO 5270 Pulps Laboratory sheets Determination of physical properties (ISO/DIS 5270:2021)

2021-09-16

19. CEN/TC 185 – Fasteners

prEN ISO 898-2 Fasteners Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes (ISO/DIS 898-2:2021)

2021-09-02

20. CEN/TC 189 – Geosynthetics

prEN 16416 Geosynthetic clay barriers Determination of water flux index Flexible wall permeameter method at constant head

2021-09-23

prEN 17738 Geotextiles and Geotextile related products Damage during installation procedure Full scale test

2021-09-23

21. CEN/TC 193 – Adhesives

prEN 302-1 Adhesives for load-bearing timber structures Test methods Part 1: Determination of longitudinal tensile shear strength

2021-09-09

prEN 302-2 Adhesives for load-bearing timber structures Test methods Part 2: Determination of resistance to delamination

2021-09-09

prEN 302-4 Adhesives for load-bearing timber structures Test methods Part 4: Determination of the effects of wood shrinkage on the shear strength

2021-09-09

9/2021

34 www.iss.rs

prEN 302-5 Adhesives for load-bearing timber structures Test methods Part 5: Determination of maximum assembly time under referenced conditions

2021-09-09

prEN 302-6 Adhesives for load-bearing timber structures Test methods Part 6: Determination of the minimum pressing time under referenced conditions

2021-09-09

prEN 302-7 Adhesives for load-bearing timber structures Test methods Part 7: Determination of the working life under referenced conditions

2021-09-09

22. CEN/TC 207 – Furniture

EN 1335-1:2020/prA1 Office furniture Office work chair Part 1: Dimensions Determination of dimensions

2021-09-09

prEN 15372 Furniture Strength, durability and safety Requi-rements for non-domestic tables

2021-09-09

prEN 17737 Hardware for furniture Test and evaluation methods for the corrosion resistance of furniture fittings

2021-09-23

23. CEN/TC 217 – Surfaces for sports areas

prEN 12230 Surfaces for sports areas Test method for the determination of tensile properties of synthetic sports surfaces

2021-09-02

24. CEN/TC 226 – Road equipment

prEN 1463-3 Road marking materials Part 3: Active road studs: performance requirements

2021-09-09


prEN 1875-3 Rubber- or plastics- coated fabrics Determination of tear strength Part 3: Trapezoidal method

2021-09-23

26. CEN/TC 250 – Structural Eurocodes

prEN 1990 Eurocode Basis of structural and geotechnical design 2021-09-02

prEN 1991-1-2 Eurocode 1: Actions on structures Part 1-2: General actions Actions on structures exposed to fire

2021-09-02

prEN 1991-2 Eurocode 1 Actions on structures Part 2: Traffic loads on bridges and other civil engineering works

2021-09-02

prEN 1992-1-1 Eurocode 2: Design of concrete structures Part 1-1: General rules Rules for buildings, bridges and civil engineering structures

2021-09-02

9/2021

www.iss.rs 35

prEN 1992-1-2 Eurocode 2: Design of concrete structures Part 1-2: General rules Structural fire design

2021-09-02

prEN 1996-3 Eurocode 6 Design of Masonry structures Part 3: Simplified calculation methods for unreinforced masonry structures

2021-09-02

27. CEN/TC 251 – Health informatics

prEN ISO/IEEE 11073-40101 Health informatics Device interoperability Part 40101: Foundational Cybersecurity Processes for vulnerability assessment (ISO/IEEE FDIS 11073-40101:2021)

2021-09-16

prEN ISO/IEEE 11073-40102 Health informatics Device interoperability Part 40102: Foundational Cybersecurity Capabilities for mitigation (ISO/IEEE FDIS 11073-40102:2021)

2021-09-16

28. CEN/TC 252 – Child use and care articles

EN 1888-2:2018/prA1 Child care articles Wheeled child conveyances Part 2: Pushchairs for children above 15 kg up to 22 kg

2021-09-16

29. CEN/TC 256 – Railway applications

EN 15355:2019/prA1 Railway applications Braking Distributor valves and distributor-isolating devices

2021-09-02

30. CEN/TC 261 – Packaging

prEN 13045 Packaging Flexible cylindrical plastic tubes Dimensions and tolerances

2021-09-23

prEN 16565 Packaging Flexible tubes Test method to determine the orientation of the flip-top cap

2021-09-02

prEN ISO 15750-3 Packaging Steel drums Part 3: Inserted flange -type closure systems (ISO/DIS 15750-3:2021)

2021-09-16

31. CEN/TC 268 – Cryogenic vessels and specific hydrogen technologies applications

prEN ISO 21012 Cryogenic vessels Hoses (ISO/DIS 21012:2021) 2021-09-16

32. CEN/TC 289 – Leather

prEN ISO 17072-2 Leather Chemical determination of metal content Part 2: Total metal content (ISO/DIS 17072-2:2021)

2021-09-16

prEN ISO 18218-1 Leather Determination of ethoxylated alkylphenols Part 1: Direct method (ISO/DIS 18218-1:2021)

2021-09-23

9/2021

36 www.iss.rs

prEN ISO 23702-1 Leather Per- and polyfluoroalkyl substances Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography (ISO/DIS 23702-1:2021)

2021-09-23

33. CEN/TC 305 – Potentially explosive atmospheres – Explosion prevention and protection

prEN 14983 Explosion prevention and protection in underground mines Equipment and protective systems for firedamp drainage

2021-09-23

34. CEN/TC 318 – Hydrometry

prEN 17694-1 Hydrometry Performance requirements and test procedures for water monitoring equipment Devices for the determination of flow Part 1: Open channel instrumentation

2021-09-02

prEN 17694-2 Hydrometry Performance requirements and test procedures for water monitoring equipment Devices for the determination of flow Part 2: Closed conduit instrumentation

2021-09-23

35. CEN/TC 341 – Geotechnical Investigation and Testing

EN ISO 17892-12:2018/prA2 Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of liquid and plastic limits Amendment 2 (ISO 17892-12:2018/ DAM 2:2021)

2021-09-16

36. CEN/TC 348 – Facility Management

prEN ISO 41018 Facility management Development of a facility management policy (ISO/DIS 41018:2021)

2021-09-16

37. CEN/TC 350 – Sustainability of construction works

prEN 15978-1 Sustainability of construction works Methodology for the assessment of performance of buildings Part 1: Environmental Performance

2021-09-09

38. CEN/TC 352 – Nanotechnologies

prEN ISO 21363 Nanotechnologies Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)

2021-09-02

9/2021

www.iss.rs 37

prEN ISO 80004-1 Nanotechnologies Vocabulary Part 1: Core terms and definitions (ISO/DIS 80004-1:2021)

2021-09-16

39. CEN/TC 429 – Food hygiene – Commercial

warewashing machines – Hygiene requi-

rements and testing

prEN 17735 Commercial dishwashing machines Hygiene requi-rement and testing

2021-09-16

40. CEN/TC 433 – Entertainment Technology –

Machinery, equipment and installations

prEN 17736 Entertainment technology Specifications for design and manufacture of aluminium stage decks and frames

2021-09-09

41. CEN/TC 437 – Electronic cigarettes and

e-liquids

prEN ISO 24211 Vapour products Determination of selected carbonyls in vapour product emissions (ISO/DIS 24211:2021)

2021-09-23

42. CEN/TC 438 – Additive Manufacturing

prEN ISO/ASTM 52931 Additive manufacturing of metals Environment, health and safety General principles for use of metallic materials (ISO/ASTM DIS 52931:2021)

2021-09-09

43. CEN/TC 442 – Building Information

Modelling (BIM)

prEN ISO 29481-3 Building information models Information delivery manual Part 3: Data schema and code (ISO/DIS 29481-3:2021)

2021-09-02

44. CEN/TC 463 – Microbiology of the food

chain

prEN ISO 15213-1 Microbiology of the food chain Horizontal method for the detection and enumeration of Clostridium spp. Part 1: Enumeration of sulfite-reducing Clostridium spp. by colony-count technique (ISO/DIS 15213-1:2021)

2021-09-16

9/2021

38 www.iss.rs

prEN ISO 20976-2 Microbiology of the food chain Requirements and guidelines for conducting challenge tests of food and feed products Part 2: Challenge tests to study inactivation potential and kinetic parameters (ISO/DIS 20976-2:2021)

2021-09-16

45. CEN/TC 464 – Small Craft

prEN ISO 10087 Small craft Craft identification Coding system (ISO/FDIS 10087:2021)

2021-09-02

9/2021

www.iss.rs 39

2021

date of availability).

2021

DAV

1. CEN/CLC/JTC 1 – Criteria for conformity

assessment bodies

EN ISO/IEC 17030:2021 Conformity assessment General requirements for third-party marks of conformity (ISO/IEC 17030:2021)

2021-09-22

2. CEN/CLC/JTC 3 – Quality management

and corresponding general aspects

for medical devices

EN ISO 13485:2016/A11:2021 Medical devices Quality management systems Requirements for regulatory purposes (ISO 13485:2016)

2021-09-08

3. CEN/CLC/JTC 4 – Services for fire safety

and security systems

EN 50710:2021 Requirements for the provision of secure remote services for fire safety systems and security systems

2021-09-24


EN 16602-70-15:2021 Space product assurance Non-destructive testing 2021-09-01

EN 16603-10-04:2021 Space engineering Space environment 2021-09-01

5. CEN/SS C01 – Food Products

EN ISO 11132:2021 Sensory analysis Methodology Guidelines for the measurement of the performance of a quantitative descriptive sensory panel (ISO 11132:2021)

2021-09-22

9/2021

40 www.iss.rs

2021

DAV

6. CEN/TC 10 – Lifts, escalators and moving walks

EN 81-22:2021 Safety rules for the construction and installation of lifts Lifts for the transport of persons and goods Part 22: Passenger and goods passenger lifts with inclined travel path

2021-09-01

7. CEN/TC 12 – Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

CEN ISO/TR 10400:2021 Petroleum and natural gas industries Formulae and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing (ISO/TR 10400:2018)

2021-09-22

8. CEN/TC 15 – Inland navigation vessels

EN 17556:2021 Inland navigation vessels Safety rota and safety plans for passenger vessels

2021-09-15

9. CEN/TC 19 – Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin.

EN 15199-4:2021 Petroleum products Determination of boiling range distribution by gas chromatography method Part 4: Light fractions of crude oil

2021-09-01

10. CEN/TC 55 – Dentistry

EN ISO 6877:2021 Dentistry Endodontic obturating materials (ISO 6877:2021)

2021-09-22

EN ISO 21563:2021 Dentistry Hydrocolloid impression materials (ISO 21563:2021)

2021-09-15

11. CEN/TC 58 – Safety and control devices for burners and appliances burning gaseous or liquid fuels

EN 13611:2019/AC:2021 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels General requirements

2021-09-01

12. CEN/TC 107 – Prefabricated district heating and district cooling pipe system

EN 17415-2:2021 District cooling pipes Bonded single pipe systems for directly buried cold water networks Part 2: Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene

2021-09-01

9/2021

www.iss.rs 41

2021

DAV

EN 17415-3:2021 District cooling pipes Bonded single pipe systems for directly buried cold water networks Part 3: Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene

2021-09-01

13. CEN/TC 113 – Heat pumps and air conditioning units

EN 1397:2021 Heat exchangers Hydronic room fan coil units Test procedures for establishing the performance

2021-09-01


EN ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)

2021-09-22

EN ISO 13918:2018/A1:2021 Welding Studs and ceramic ferrules for arc stud welding Amendment 1 (ISO 13918:2017/ /Amd 1:2021)

2021-09-15

15. CEN/TC 132 – Aluminium and aluminium alloys

EN 603-3:2021 Aluminium and aluminium alloys Wrought forging stock Part 3: Tolerances on dimensions and form

2021-09-22

EN ISO 7668:2021 Anodizing of aluminium and its alloys Measu-rement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021)

2021-09-01

16. CEN/TC 134 – Resilient, textile and laminate floor coverings

EN 13329:2016 + A2:2021 Laminate floor coverings Elements with a surface layer based on aminoplastic thermosetting resins

Specifications, requirements and test methods

2021-09-22

EN 14978:2016 + A1:2021 Laminate floor coverings Elements with acrylic based surface layer, electron beam cured Speci-fications, requirements and test methods

2021-09-22

EN 15468:2016 + A1:2021 Laminate floor coverings Elements with directly applied printing and resin surface layer Speci-fications, requirements and test methods

2021-09-22

17. CEN/TC 136 – Sports, playground and other recreational facilities and equipment

EN 913:2018 + A1:2021 Gymnastic equipment General safety requirements and test methods

2021-09-15

9/2021

42 www.iss.rs

2021

DAV

18. CEN/TC 139 – Paints and varnishes

EN ISO 13885-1:2021 Gel permeation chromatography (GPC) Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020)

2021-09-01

EN ISO 13885-2:2021 Gel permeation chromatography (GPC) Part 2: N,N-Dimenthylacetamide (DMAC) as eluent (ISO 13885-2:2020)

2021-09-01

EN ISO 13885-3:2021 Gel permeation chromatography (GPC) Part 3: Water as eluent (ISO 13885-3:2020)

2021-09-01

EN ISO 22553-7:2021 Paints and varnishes Electro-deposition coatings Part 7: Electrical wet-film resistance (ISO

22553-7:2020)

2021-09-01

EN ISO 22553-8:2021 Paints and varnishes Electro-deposition coatings Part 8: Electric charge density (ISO 22553-8:2020)

2021-09-01

EN ISO 22553-9:2021 Paints and varnishes Electro-deposition coatings Part 9: Stoving loss (ISO 22553-9:2020)

2021-09-01

EN ISO 22553-11:2021 Paints and varnishes Electro-deposition coatings Part 11: Bath stability (ISO 22553-11:2020)

2021-09-01

EN ISO 22553-12:2021 Paints and varnishes Electro-deposition coatings Part 12: Sedimentation on horizontal areas

(ISO 22553-12:2020)

2021-09-01

19. CEN/TC 140 – In vitro diagnostic medical devices

EN ISO 6717:2021 In vitro diagnostic medical devices Single-use containers for the collection of specimens from humans other than blood (ISO 6717:2021)

2021-09-08

20. CEN/TC 172 – Pulp, paper and board

EN ISO 12625-7:2021 Tissue paper and tissue products Part 7: Determi-nation of optical properties Measurement of brigh-tness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2021)

2021-09-15

21. CEN/TC 189 – Geosynthetics

EN 12447:2021 Geotextiles and geotextile-related products Scree-ning test method for determining the resistance to hydrolysis in water

2021-09-01

22. CEN/TC 191 – Fixed firefighting systems

EN 14972-14:2021 Fixed firefighting systems Water mist systems Part 14: Test protocol for combustion turbines in enclosures exceeding 260 m³ for open nozzle systems

2021-09-15

EN 14972-15:2021 Fixed firefighting systems Water mist systems Part 15: Test protocol for combustion turbines in enclosures not exceeding 260 m³ for open nozzle systems

2021-09-15

9/2021

www.iss.rs 43

2021

DAV

23. CEN/TC 204 – Sterilization of medical devices

EN ISO 17664-1:2021 Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices Part 1: Critical and semi-critical medical devices (ISO 17664-1:2021)

2021-09-01

24. CEN/TC 210 – GRP tanks and vessels

EN 13121-1:2021 GRP tanks and vessels for use above ground Part 1: Raw materials Specification conditions and acceptance criteria

2021-09-22

25. CEN/TC 216 – Chemical disinfectants and antiseptics

EN 12353:2021 Chemical disinfectants and antiseptics Preser-vation of test organisms used for the determination of bactericidal (including Legionella), mycobacte-ricidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity

2021-09-01

26. CEN/TC 228 – Heating systems and water based cooling systems in buildings

EN ISO 11855-3:2021 Building environment design Embedded radiant heating and cooling systems Part 3: Design and dimensioning (ISO 11855-3:2021)

2021-09-01

EN ISO 11855-4:2021 Building environment design Embedded radiant heating and cooling systems Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2021)

2021-09-01

EN ISO 11855-5:2021 Building environment design Embedded radiant heating and cooling systems Part 5: Installation (ISO 11855-5:2021)

2021-09-01

27. CEN/TC 247 – Building Automation, Controls and Building Management

EN 14908-8:2021 Open Data Communication in Building Automation, Controls and Building Management Control Net-work Protocol Part 8: Communication using Broad-band over Power Line Networks with internet protocols

2021-09-01

EN 14908-9:2021 Open Data Communication in Building Automation, Controls and Building Management Control Net-work Protocol Part 9: Wireless Communication in ISM bands

2021-09-01

9/2021

44 www.iss.rs

2021

DAV


EN ISO 5470-2:2021 Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader (ISO 5470-2:2021)

2021-09-08

EN ISO 30023:2021 Textiles Qualification symbols for labelling work-wear to be industrially laundered (ISO 30023:2021)

2021-09-08

29. CEN/TC 249 – Plastics

EN 17410:2021 Plastics Controlled loop recycling of PVC-U profiles from windows and doors

2021-09-22

EN ISO 13000-1:2021 Plastics Polytetrafluoroethylene (PTFE) semifinis-hed products Part 1: Requirements and designation (ISO 13000-1:2021)

2021-09-01

EN ISO 13000-2:2021 Plastics Polytetrafluoroethylene (PTFE) semifinis-hed products Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)

2021-09-01

30. CEN/TC 256 – Railway applications

EN ISO 3381:2021 Railway applications Acoustics Noise measu-rement inside railbound vehicles (ISO 3381:2021)

2021-09-22

31. CEN/TC 267 – Industrial piping and pipelines

EN 13480-3:2017/A4:2021 Metallic industrial piping Part 3: Design and calculation

2021-09-22

32. CEN/TC 276 – Surface active agents

EN 17035:2021 Surface active agents Bio-based surfactants Requirements and test methods

2021-09-22

33. CEN/TC 278 – Intelligent transport systems

CEN ISO/TS 17573-3:2021 Electronic fee collection System architecture for vehicle-related tolling Part 3: Data dictionary (ISO/TS 17573-3:2021)

2021-09-15

34. CEN/TC 290 – Dimensional and geometrical product specification and verification

EN ISO 10360-10:2021 Geometrical product specifications (GPS) Accep-tance and reverification tests for coordinate mea-suring systems (CMS) Part 10: Laser trackers (ISO 10360-10:2021)

2021-09-15

9/2021

www.iss.rs 45

2021

DAV

EN ISO 10360-13:2021 Geometrical product specifications (GPS) Accep-tance and reverification tests for coordinate mea-suring systems (CMS) Part 13: Optical 3D CMS (ISO 10360-13:2021)

2021-09-22

35. CEN/TC 301 – Road vehicles

EN 17507:2021 Road vehicles Portable Emission Measuring Systems (PEMS) Performance assessment

2021-09-15

36. CEN/TC 329 – Tourism services

EN ISO 18513:2021 Tourism services Hotels and other types of tourism accommodation Vocabulary (ISO 18513:2021)

2021-09-08

37. CEN/TC 333 – Cycles

EN 17406:2020 + A1:2021 Classification for bicycles usage 2021-09-22

38. CEN/TC 341 – Geotechnical Investigation and Testing

EN ISO 17892-12:2018/ A1:2021

Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of liquid and plastic limits Amendment 1 (ISO 17892-12:2018/ /Amd 1:2021)

2021-09-08

EN ISO 22476-4:2021 Geotechnical investigation and testing Field testing Part 4: Prebored pressuremeter test by Ménard procedure (ISO 22476-4:2021)

2021-09-15

39. CEN/TC 343 – Solid Recovered Fuels

EN ISO 22940:2021 Solid recovered fuels Determination of elemental composition by X-ray fluorescence (ISO 22940:2021)

2021-09-08

40. CEN/TC 386 – Photocatalysis

EN 16980-1:2021 Photocatalysis Continuous flow test methods Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials

2021-09-15


EN ISO 21392:2021 Cosmetics Analytical methods Measurement of traces of heavy metals in cosmetic finished products using ICP/MS technique (ISO 21392:2021)

2021-09-01


EN 13012:2021 Petrol filling stations Construction and performance of automatic nozzles for use on fuel dispensers

2021-09-15

9/2021

46 www.iss.rs

2021

DAV

EN 13617-1:2021 Petrol filling stations Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

2021-09-15

EN 13617-2:2021 Petrol filling stations Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers

2021-09-15

EN 13617-3:2021 Petrol filling stations Part 3: Safety requirements for construction and performance of shear valves

2021-09-15

EN 13617-4:2021 Petrol filling stations Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers

2021-09-15

43. CEN/TC 459/SC 5 – Steels for heat

treatment, alloy steels, free-cutting

steels and stainless steels

EN 10132:2021 Cold rolled narrow steel strip for heat treatment Technical delivery conditions

2021-09-15

44. CEN/TC 463 – Microbiology of the food

chain

EN ISO 6888-1:2021 Microbiology of the food chain Horizontal method for the enumeration of coagulase-positive staphylo-cocci (Staphylococcus aureus and other species) Part 1: Method using Baird-Parker agar medium (ISO 6888-1:2021)

2021-09-08

EN ISO 6888-2:2021 Microbiology of the food chain Horizontal method for the enumeration of coagulase-positive staphylo-cocci (Staphylococcus aureus and other species) Part 2: Method using rabbit plasma fibrinogen agar medium (ISO 6888-2:2021)

2021-09-08

9/2021

www.iss.rs 47

(CENELEC)

2021

:

2021

1. CEN/CLC/Guides – Group for CEN-CENELEC Guides

CEN/CLC Guide 38 Guide for multifuel stations 2021-09-15


prCEN/TR 17603-32-21 Space engineering Adhesive bonding handbook 2021-09-08

prCEN/TR 17603-32-22 Space engineering Insert design handbook 2021-09-08

prCEN/TR 17603-32-23 Space engineering Threaded fasteners handbook 2021-09-08

prCEN/TR 17603-32-24 Space engineering Buckling of structures 2021-09-08

prCEN/TR 17603-32-25 Space engineering Mechanical shock design and verification handbook

2021-09-08

prCEN/TR 17603-32-26 Space engineering Spacecraft mechanical loads analysis handbook

2021-09-08

prCEN/TR 17603-40 Space engineering Software engineering handbook 2021-09-08

prCEN/TR 17603-40-01 Space engineering Agile software development handbook

2021-09-08

prCEN/TR 17603-50 Space engineering Communication guidelines 2021-09-08


WI JT013043 (WI=JT013043)

Multi-layered approach for a set of requirements for information/cyber security controls for Cloud Services

2021-09-08

WI JT013044 (WI=JT013044)

Requirements for Conformity Assessment Bodies certifying Cloud Services

2021-09-08

9/2021

48 www.iss.rs

2021

4. CLC/SR 107 – Process management for avionics

EN IEC 62668-1:2019/prA1 Process management for avionics Counterfeit prevention Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components

2021-09-06

5. CLC/SR 112 – Evaluation and qualification of electrical insulating materials and systems (to be defined)

prEN IEC 61857-42 Electrical insulation systems Procedures for thermal evaluation Part 42: Specific requirements for evaluation of an electrical insulation system (EIS) used for road transportation applications

2021-09-20

prEN IEC 62631-3-2 Dielectric and resistive properties of solid insulating materials Part 3-2: Determination of resistive properties (DC methods) Surface resistance and surface resistivity

2021-09-20

6. CLC/SR 125 – Personal e-Transporters (PeTs)

prEN IEC 63281-2-1 Personal e-Transporters Part 2-1: Test method for total run time of e-scooter with consideration to environmental conditions of actual use

2021-09-20

7. CLC/SR 46F – RF and microwave passive components

prEN IEC 61169-70 IEC 61169-70 Ed 1.0: Radio-frequency connectors Part 70: Sectional specifications RF coaxial connec-tors with bayonett locking and characteristic impe-dance 75 Ohm (Type HD-BNC)

2021-09-20

prEN IEC 61169-72 RADIO-FREQUENCY CONNECTORS Part 72: Sectional specification for Precision SMP3 series coaxial connectors as test connector

2021-09-20

8. CLC/SR 47D – Mechanical standardization of semiconductor devices

prEN IEC 63378-3 Thermal standardization on semiconductor packages Part 3: Thermal circuit simulation models of

semiconductor packages for transient analysis

2021-09-20

9. CLC/SR 68 – Magnetic alloys and steels

prEN IEC 63311 Permanent magnet (magnetically hard) materials Method of measurement based upon the pulsed

field magnetometry (PFM) technique

2021-09-20

9/2021

www.iss.rs 49

2021

10. CLC/SR 96 – Transformers, reactors, power supply units, and combinations thereof

prEN IEC 61558-2-20 Safety of transformers, reactors, power supply units and combinations thereof Part 2-20: Particular requirements and tests for small reactors

2021-09-13

11. CLC/TC 13 – Electrical energy measurement and control

prEN IEC 62052-31 Electricity metering equipment (AC) General requirements, tests and test conditions Part 31: Product safety requirements and tests

2021-09-13

prEN IEC 62057-3 IEC 62057-3 ED1 Test equipment, techniques and procedures for electrical energy meters Part 3: Automatic Meter Testing System (AMTS)

2021-09-20

12. CLC/TC 20 – Electric cables

prEN IEC 61442 Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

2021-09-13

13. CLC/TC 21X – Secondary cells and batteries

EN 62620:2015/prA1 Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for use in industrial applications

2021-09-13

14. CLC/TC 26 – Electric welding

FprEN IEC 60974-1:2021/ prAA

Arc welding equipment Part 1: Welding power sources

2021-09-15

15. CLC/TC 37A – Low voltage surge protective devices

prEN IEC 61643-21 Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks Performance requirements and testing methods

2021-09-13

16. CLC/TC 57 – Power systems management and associated information exchange

prEN IEC 61850-7-410 Communication networks and systems for power utility automation Part 7-410: Basic communication structure Hydroelectric power plants Communi-cation for monitoring and control

2021-09-20

9/2021

50 www.iss.rs

2021

prEN IEC 61970-303 Energy Management System Application Program Interface (EMS-API) Part 303: Common information model (CIM), Network Model Management

2021-09-20

prEN IEC 61970-459 Energy Management System Application Program Interface (EMS-API) Part 459: Framework for managing shared network model information

2021-09-20

17. CLC/TC 59X – Performance of household and similar electrical appliances

WI 74539 (WI=74539)

Household and similar electrical appliances Material Efficiency Assessment of applicability of EN 4555X

2021-09-15

18. CLC/TC 61 – Safety of household and similar electrical appliances

EN 60335-2-27:2013/prAC Household and similar electrical appliances Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

2021-09-23

EN 60335-2-50:2003/prAA Household and similar electrical appliances Safety Part 2-50: Particular requirements for commercial

electric bains-marie

2021-09-08

EN IEC 60335-2-110:202X/ prA1

Household and similar electrical appliances Safety Part 2-110: Particular requirements for commercial

microwave appliances with insertion or contacting applicators

2021-09-08

19. CLC/TC 62 – Electrical equipment in medical practice

prEN IEC 62220-2 Medical electrical equipment Characteristics of digital X-ray imaging devices Part 2: Determination of dual-energy subtraction efficiency Detectors used for dual-energy radiographic imaging

2021-09-20

20. CLC/TC 64 – Electrical installations and protection against electric shock

HD 60364-5-52:2011/prA1 Low-voltage electrical installations Part 5-52: Selection and erection of electrical equipment Wiring systems

2021-09-20

21. CLC/TC 65X – Industrial-process measu-rement, control and automation

prEN IEC 62453-1 Field device tool (FDT) interface specification Part 1: Overview and guidance

2021-09-13

9/2021

www.iss.rs 51

2021

prEN IEC 63187 Functional safety Framework for safety critical E/E/PE systems for defence industry applications

2021-09-13

22. CLC/TC 66X – Electrical and electronic test and measuring instruments, systems and accessories

prEN IEC 61010-2-011 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-011: Particular requirements for refrigerating equipment

2021-09-20

prEN IEC 61010-2-012 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment

2021-09-20

23. CLC/TC 69X – Electrical systems for electric road vehicles

prEN IEC 61851-23-3 Electric vehicle conductive charging system Part 23-3: DC electric vehicle supply equipment for Megawatt charging systems

2021-09-13

prEN IEC 63243 Interoperability and safety of dynamic wireless power transfer (WPT) for electric vehicles

2021-09-20

24. CLC/TC 78 – Equipment and tools for live working

prEN IEC 60903 Live working Electrical insulating gloves 2021-09-20

prEN IEC 60984 Live working Electrical insulating sleeves 2021-09-20

25. CLC/TC 81X – Lightning protection

prEN IEC 62561-4 Lightning protection system components (LPSC) Part 4: Requirements for conductor fasteners

2021-09-20

26. CLC/TC 82 – Solar photovoltaic energy systems

EN 61853-2:2016/prA1 Photovoltaic (PV) module performance testing and energy rating Part 2: Spectral responsivity, incidence angle and module operating temperature measurements

2021-09-20

prEN IEC 62109-1 Safety of power converters for use in photovoltaic power systems Part 1: General requirements

2021-09-20

prEN IEC 62109-2 Safety of power converters for use in photovoltaic power systems Part 2: Particular requirements for inverters

2021-09-20

9/2021

52 www.iss.rs

2021

prEN IEC 63257 Power line communication for DC shutdown equipment

2021-09-20

27. CLC/TC 86BXA – Fibre optic interconnect,

passive and connectorised components

prEN IEC 61300-2-33 Fibre optic interconnecting devices and passive components Basic test and measurement proce-dures Part 2-33: Tests Assembly and disassembly of fibre optic mechanical splices, fibre management systems and protective housings

2021-09-20

28. CLC/TC 100X – Audio, video and

multimedia systems and equipment

and related sub-systems

prEN IEC 62087-2 Audio, video, and related equipment Determination of power consumption Part 2: Signals and media (TA 19)

2021-09-13

prEN IEC 62087-3 Audio, video, and related equipment Determi-nation of power consumption Part 3: Television sets (TA 19)

2021-09-13

29. CLC/TC 111X – Environment

prEN IEC 62321-3-1 DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS Part 3-1: Ele-mental Screening by X-ray fluorescence spectrometry

2021-09-20

30. CLC/TC 205 – Home and Building Electronic

Systems (HBES)

prEN 50090-6-3 Home and Building Electronic Systems (HBES) Part 6-3 -3rd Party HBES IoT API

2021-09-15

31. CLC/TC 210 – Electromagnetic Compatibility

(EMC)

prEN IEC 55037 Industrial, scientific and medical equipment Radio-frequency disturbance characteristics Limits and methods for measurements in situ and at defined site

2021-09-13

9/2021

www.iss.rs 53

2021

www.iss.rs,

2021


prEN ISO 27007 Information security, cybersecurity and privacy pro-tection Guidelines for information security mana-gement systems auditing (ISO/IEC 27007:2020)

2021-09-02

2. CLC/SR 46F – RF and microwave passive components

prEN IEC 61169-69:2021 Radio Frequency Connectors Part 69: Sectional specification for series SMP3 RF coaxial connectors

2021-09-03

3. CLC/TC 14 – Power transformers

prEN IEC 60076-25:2021 Power transformers Part 25: Neutral grounding resistors

2021-09-17

4. CLC/TC 34 – Lamps and related equipment

EN IEC 60810:2018/prA2:2021 Amendment 2 Lamps, light sources and LED pac-kages for road vehicles Performance requirements

2021-09-03

prEN IEC 62386-101:2021 Digital addressable lighting interface Part 101: General requirements System components

2021-09-17

prEN IEC 62386-102:2021 Digital addressable lighting interface Part 102: General requirements Control gear

2021-09-17

http://www.iss.rs/

9/2021

54 www.iss.rs

2021

prEN IEC 62386-103:2021 Digital addressable lighting interface Part 103: General requirements Control devices

2021-09-17

5. CLC/TC 46X – Communication cables

prEN IEC 62037-7:2021 Passive RF and Microwave devices, intermodulation level measurement Part 7: Field measurements of passive intermodulation

2021-09-03

prEN IEC 62037-8:2021 Measurement of passive intermodulation generated by objects exposed to RF radiation

2021-09-03

6. CLC/TC 59X – Performance of household and similar electrical appliances

prEN IEC 61855:2021 Household and similar use electrical hair care app-liances Methods for measuring the performance

2021-09-10


EN 50570:2013/prA2:2021 Household and similar electrical appliances Safety Particular requirements for commercial electric tumble dryers

2021-09-03

EN 50571:2013/prA2:2021 Household and similar electrical appliances Safety Particular requirements for commercial electric washing machines

2021-09-03

prEN IEC 60335-2-34:2021 Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors

2021-09-10

prEN IEC 60335-2-34:2021/ prA11:2021

Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors

2021-09-10

FprEN IEC 60335-2-58:2021/ prAA:2021

Household and similar electrical appliances Safety Part 2-58: Particular requirements for commercial electric dishwashing machines

2021-09-03

FprEN IEC 60335-2-103:2021/ prA1:2021

Household and similar electrical appliances Safety Part 2-103: Particular requirements for drives for gates, doors and windows

2021-09-03

FprEN IEC 60335-2-103:2021/ prA2:2021


2021-09-03

FprEN IEC 60335-2-103:2021/ prAA:2021


2021-09-03

prEN IEC 60335-2-113:2021 Household and similar electrical appliances Safety Part 2-113: Particular requirements for cosmetic and beauty care appliances incorporating lasers and intense light sources

2021-09-10

9/2021

www.iss.rs 55

2021

prEN IEC 60335-2-113:2021/ prA11:2021

Household and similar electrical appliances Safety Part 2-113: Particular requirements for cosmetic and beauty care appliances incorporating lasers and intense light sources

2021-09-10

prEN IEC 60335-2-115:2021 Household and similar electrical appliances Safety Part 2-115: Particular requirements for skin beauty care appliances

2021-09-10

prEN IEC 60335-2-115:2021/ prA11:2021

Household and similar electrical appliances Safety Part 2-115: Particular requirements for skin beauty care appliances

2021-09-10

8. CLC/TC 62 – Electrical equipment in medical practice

EN IEC 80601-2-26:2020/ prA1:2021

Amendment 1 Medical electrical equipment Part 2-26: Particular requirements for the basic safety and essential performance of electro-encephalograph

2021-09-10

EN IEC 80601-2-59:2019/ prA1:2021

Amendment 1 Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening

2021-09-10

prEN IEC 60601-2-54:2021 Medical electrical equipment Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

2021-09-10

9. CLC/TC 65X – Industrial-process measu-rement, control and automation

prEN IEC 61139-2:2021 Industrial networks Single-drop digital communi-cation interface Part 2: Functional safety extensions

2021-09-03

prEN IEC 63206:2021 Industrial Process control systems Recorders 2021-09-10


EN IEC 61215-1-3:2021/ prA1:2021

Amendment 1 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules

2021-09-03

EN IEC 61215-1-4:2021/ prA1:2021

Amendment 1 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules

2021-09-03

9/2021

56 www.iss.rs

2021

11. CLC/TC 86BXA – Fibre optic interconnect,

passive and connectorised components

prEN IEC 61300-2-5:2021 Fibre optic interconnecting devices and passive components Basic test and measurement proce-dures Part 2-5: Tests Torsion

2021-09-10

prEN IEC 61300-3-35:2021 Fibre optic interconnecting devices and passive components Basic test and measurement proce-dures Part 3-35: Examinations and measurements

Visual inspection of fibre optic connectors and fibre-stub transceivers

2021-09-10

12. CLC/TC 99X – Power installations

exceeding 1 kV a.c. (1,5 kV d.c.)

prEN IEC 60071-12:2021 Insulation co-ordination Part 12: Application guidelines for LCC HVDC converter stations

2021-09-24

13. CLC/TC 213 – Cable management systems

prEN IEC 61537:2021 Cable management Cable tray systems and cable ladder systems

2021-09-10

prEN IEC 61537:2021/ prAA:2021

Cable management Cable tray systems and cable ladder systems

2021-09-10

prEN IEC 63355:2021 Cable management systems Test method for content of halogens

2021-09-03

9/2021

www.iss.rs 57

2021

(DAV date of availability).

DAV

1. CEN/CLC/JTC 1 – Criteria for conformity

assessment bodies

EN ISO/IEC 17030:2021 Conformity assessment General requirements for third-party marks of conformity (ISO/IEC 17030:2021)

2021-09-22

2. CEN/CLC/JTC 3 – Quality management and corresponding general aspects for medical devices

EN ISO 13485:2016/ A11:2021

Medical devices Quality management systems Re-quirements for regulatory purposes (ISO 13485:2016)

2021-09-08

3. CEN/CLC/JTC 4 – Services for fire safety and security systems

EN 50710:2021 Requirements for the provision of secure remote services for fire safety systems and security systems

2021-09-24


EN 16602-70-15:2021 Space product assurance Non-destructive testing 2021-09-01

EN 16603-10-04:2021 Space engineering Space environment 2021-09-01

EN IEC 60152:2021 Designation of phase differences by hour numbers in three-phase AC systems

2021-09-03

EN IEC 60445:2021 Basic and safety principles for man-machine interface, marking and identification Identification of equip-ment terminals, conductor terminations and conductors

2021-09-03

5. CLC/SR 86C – Fibre optic systems and active devices

EN IEC 61757-2-1:2021 Fibre optic sensors Part 2-1: Temperature measure-ment Temperature sensors based on fibre Bragg gratings

2021-09-17

9/2021

58 www.iss.rs

DAV

6. CLC/SR 89 – Fire hazard testing

EN IEC 60695-6-1:2021 Fire hazard testing Part 6-1: Smoke obscuration General guidance

2021-09-17

7. CLC/SR 91 – Electronics assembly technology

EN IEC 60068-2-21:2021 Environmental testing Part 2-21: Tests Test U: Robustness of terminations and integral mounting devices

2021-09-03

EN IEC 61760-2:2021 Surface mounting technology Part 2: Transportation and storage conditions of surface mounting devices (SMD) Application guide

2021-09-03

8. CLC/TC 9X – Electrical and electronic applications for railways

EN 50546:2020/AC:2021-09 Railway applications Rolling Stock Three-phase shore (external) supply system for rail vehicles and its connectors

2021-09-24

9. CLC/TC 11 – Overhead electrical lines exceeding 1 kV a.c. (1,5 kV d.c.)

EN IEC 60652:2021 Overhead line structures Loading tests 2021-09-17

10. CLC/TC 17AC – High-voltage switchgear and controlgear

EN IEC 62271-101:2021 High-voltage switchgear and controlgear Part 101: Synthetic testing

2021-09-17

EN IEC 62271-112:2021 High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines

2021-09-03

11. CLC/TC 21X – Secondary cells and batteries

EN 62133-2:2017/A1:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Part 2: Lithium systems

2021-09-03

12. CLC/TC 23E – Circuit breakers and similar devices for household and similar applications

EN 62423:2012/AC:2021-09 Type F and type B residual current operated circuit- -breakers with and without integral overcurrent protection for household and similar uses

2021-09-10

EN IEC 61316:2021 Industrial cable reels 2021-09-03

9/2021

www.iss.rs 59

DAV

13. CLC/TC 40XA – Capacitors and EMI suppre –ssion components

EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment Part 24: Sectional specification Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte

2021-09-03

EN IEC 60384-25:2021 Fixed capacitors for use in electronic equipment Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte

2021-09-03

14. CLC/TC 45AX – Instrumentation, control and electrical systems of nuclear facilities

EN IEC 60987:2021 Nuclear power plants Instrumentation and control important to safety Hardware requirements

2021-09-17

15. CLC/TC 46X – Communication cables

EN IEC 62153-4-7:2021 Metallic cables and other passive components test methods Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies Triaxial tube in tube method

2021-09-03

EN IEC 62153-4-15:2021 Metallic cables and other passive components test methods Part 4-15: Electromagnetic compatibility (EMC) Test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell

2021-09-17

16. CLC/TC 55 – Winding wires

EN IEC 60317-84:2021 Specifications for particular types of winding wires Part 84: Polyesterimide enamelled round copper wire, class 200

2021-09-17


EN IEC 60335-2-87:2020/ A1:2021

Household and similar electrical appliances Safety Part 2-87: Particular requirements for electrical animal-stunning equipment

2021-09-10

18. CLC/TC 64 – Electrical installations and protection against electric shock

HD 60364-8-2:2018/ A12:2021

Low-voltage electrical installations Part 8-2: Prosumer's low-voltage electrical installations

2021-09-03

9/2021

60 www.iss.rs

DAV

19. CLC/TC 66X – Electrical and electronic test and measuring instruments, systems and accessories

EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

2021-09-10

EN IEC 61010-2-051:2021/ A11:2021

Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

2021-09-10

EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-061: Particular requirements for laboratory atomic spectro-meters with thermal atomization and ionization

2021-09-10

EN IEC 61010-2-061:2021/ A11:2021

Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-061: Particular requirements for laboratory atomic spectro-meters with thermal atomization and ionization

2021-09-10


EN 50524:2021 Data sheet for photovoltaic inverters 2021-09-10

21. CLC/TC 86A – Optical fibres and optical fibre cables

EN IEC 60794-1-401:2021 Optical fibre cables Part 1-401: Generic specification Basic optical cable test procedures Electrical test

methods Short-circuit test (for OPGW, OPPC and OPAC), Method H1

2021-09-17

EN IEC 60794-1-402:2021 Optical fibre cables Part 1-402: Generic specification Basic optical cable test procedures Electrical

test methods Lightning test (for OPGW, OPPC and OPAC), Method H2

2021-09-17

22. CLC/TC 95X – Measuring relays and protection equipment

EN IEC 60255-187-1:2021 Measuring relays and protection equipment Part 187-1: Functional requirements for differential protection Restrained and unrestrained differential protection of motors, generators and transformers

2021-09-17

23. CLC/TC 116 – Safety of motor-operated electric tools

EN 50632-2-5:2016/A1:2021 Electric motor-operated tools Dust measurement procedure Part 2-5: Particular requirements for circular saws

2021-09-24

9/2021

www.iss.rs 61

DAV

EN 50632-2-14:2016/ A1:2021

Electric motor-operated tools Dust measurement procedure Part 2-14: Particular requirements for planers

2021-09-24

EN 50632-2-17:2016/ A1:2021

Electric motor-operated tools Dust measurement procedure Part 2-17: Particular requirements for routers and trimmers

2021-09-24

EN 50632-2-19:2016/ A1:2021

Electric motor-operated tools Dust measurement procedure Part 2-19: Particular requirements for jointers

2021-09-24

EN 50632-3-1:2016/A1:2021 Electric motor-operated tools Dust measurement procedure Part 3-1: Particular requirements for transportable table saws

2021-09-24

EN 50632-3-9:2016/A1:2021 Electric motor-operated tools Dust measurement procedure Part 3-9: Particular requirements for transportable mitre saws

2021-09-24

24. CLC/TC 213 – Cable management systems

EN 50520:2020/A1:2021 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations

2021-09-17

EN 61534-21:2014/A1:2021 Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

2021-09-24

EN 61534-21:2014/ A11:2021

Powertrack systems Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

2021-09-24

EN 61534-22:2014/A1:2021 Powertrack systems Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation

2021-09-24

EN 61534-22:2014/ A11:2021

Powertrack systems Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation

2021-09-24

9/2021

62 www.iss.rs

7

(see http://webapp.etsi.org/action/pu/20210905/20210905.htm)

85


1


http://webapp.etsi.org/action/pu/20210905/20210905.htm



(ISO)

2021 64

2021 74

(I C)

2021 86

2021 91

9/2021

64 www.iss.rs

(ISO)

2021

,

-

-

1. ISO/IEC JTC 1 – Information technology

ISO/IEC DIS 5733 Information technology Cloud Data Management Interface (CDMITM) Version 2.0

2021-09-24

2. ISO/IEC JTC 1/SC 24 – Computer graphics, image processing and environmental data representation

ISO/IEC DIS 3721-1 Information technology Computer graphics, image processing and environmental data representation Information model for Mixed and Augmented Reality Contents Part 1: Core Objects and Attributes

2021-09-01

3. ISO/IEC JTC 1/SC 27 – Information security, cybersecurity and privacy protection

ISO/IEC DIS 27036-2 Cybersecurity Supplier relationships Part 2: Requirements

2021-09-09

9/2021

www.iss.rs 65

4. ISO/IEC JTC 1/SC 28 – Office equipment

ISO/IEC DIS 22954 Information technology Office equipment Automated colour profile distribution

2021-09-21

5. ISO/IEC JTC 1/SC 37 – Biometrics

ISO/IEC DIS 19794-14 Information technology Biometric data interchange formats Part 14: DNA data

2021-09-28

6. IULTCS – International Union of Leather

Technologists and Chemists Societies

ISO/DIS 14268 Leather Physical and mechanical tests Determination of water vapour permeability

2021-09-30

ISO/DIS 17072-2 Leather Chemical determination of metal content Part 2: Total metal content

2021-09-16

ISO/DIS 18218-1 Leather Determination of ethoxylated alkylphenols Part 1: Direct method

2021-09-21

ISO/DIS 23702-1 Leather - Per- and polyfluoroalkyl substances Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography

2021-09-21

7. ISO/TC 6 – Paper, board and pulps

ISO/DIS 5263-3 Pulps Laboratory wet disintegration Part 3: Disinte-gration of mechanical pulps at > 85°C

2021-09-10

ISO/DIS 5270-2 Pulps Laboratory sheets Determination of physical properties

2021-09-13

ISO/DIS 24196 Lignins Determination of lignin content in kraft lignin, soda lignin, and hydrolysis lignin

2021-09-02

8. ISO/TC 6/SC 2 – Test methods and quality

specifications for paper and board

ISO/DIS 12625-18 Tissue paper and tissue products Part 18: Determination of surface friction

2021-09-14

9. ISO/TC 8 – Ships and marine technology

ISO/DIS 23806 Ships and marine technology Cyber safety 2021-09-02

10. ISO/TC 8/SC 3 – Piping and machinery

ISO/DIS 24224 Ships and marine technology Tanker cargo manifold shore connection Technical requirements

2021-09-01

9/2021

66 www.iss.rs

ISO/DIS 24225 Ships and marine technology Pneumatic quick-closing control devices

2021-09-23

11. ISO/TC 20/SC 16 – Unmanned aircraft systems

ISO/DIS 23629-12 UAS traffic management (UTM) Part 12: Requirements for UTM service providers

2021-09-20

ISO/DIS 24356 General requirements for tethered unmanned aircraft systems

2021-09-30

12. ISO/TC 21/SC 3 – Fire detection and alarm systems

ISO/DIS 7240-12 Fire detection and alarm systems Part 12: Line type smoke detectors using a transmitted optical beam

2021-09-01

13. ISO/TC 22/SC 31 – Data communication

ISO/DIS 15118-4 Road vehicles Vehicle to grid communication interface Part 4: Network and application protocol confor-

mance test

2021-09-29

14. ISO/TC 22/SC 36 – Safety and impact testing

ISO/DIS 13215-2 Road vehicles Reduction of misuse risk of child restraint systems Part 2: Requirements and test procedures for correct installation (panel method)

2021-09-27

ISO/DIS 13215-3 Road vehicles Reduction of misuse risk of child restraint systems Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA)

2021-09-27

15. ISO/TC 23/SC 6 – Equipment for crop protection

ISO 28139:2019/DAmd 1 Equipment for crop protection Knapsack combustion engine-driven airblast sprayers Safety and environ-mental requirements and test methods Amendment 1

2021-09-17

16. ISO/TC 27/SC 1 – Coal preparation: Terminology and performance

ISO/DIS 7936 Coal Determination and presentation of float and sink characteristics General directions for apparatus and procedures

2021-09-03

17. ISO/TC 27/SC 5 – Methods of analysis

ISO/DIS 23380 Coal Selection of methods for the determination of trace elements

2021-09-10

9/2021

www.iss.rs 67

18. ISO/TC 34 – Food products

ISO/DIS 24583 Quantitative nuclear magnetic resonance spectroscopy Purity determination of organic compounds used for foods and food products General requirements

2021-09-20

19. ISO/TC 34/SC 9 – Microbiology

ISO/DIS 15213-1 Microbiology of the food chain Horizontal method for the detection and enumeration of Clostridium spp. Part 1: Enumeration of sulfite-reducing Clostridium spp. by colony-count technique

2021-09-13

ISO/DIS 20976-2 Microbiology of the food chain Requirements and guidelines for conducting challenge tests of food and feed products Part 2: Challenge tests to study inactivation potential and kinetic parameters

2021-09-13

20. ISO/TC 35/SC 12 – Preparation of steel

substrates before application of paints

and related products

ISO/DIS 8504-4 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 4: Acid pickling

2021-09-06

21. ISO/TC 37/SC 3 – Management of terminology

resources

ISO/DIS 12620-1 Management of terminology resources Data categories Part 1: Specifications

2021-09-30

22. ISO/TC 38 – Textiles

ISO/DIS 4333 Textiles Determination of reduction activity of specific proteins derived from pollen and mite and other sources on textile products

2021-09-22

23. ISO/TC 43/SC 1 – Noise

ISO/DIS 5128 Acoustics Measurement of interior vehicle noise 2021-09-20

24. ISO/TC 44/SC 10 – Quality management in the

field of welding

ISO/DIS 15614-4 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 4: Finishing welding of aluminium castings

2021-09-07

9/2021

68 www.iss.rs

ISO/DIS 15614-6 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 6: Arc and gas welding of copper and its alloys

2021-09-09

25. ISO/TC 45/SC 3 – Raw materials (including

latex) for use in the rubber industry

ISO/DIS 2006-1 Rubber latex, synthetic Determination of mechanical stability Part 1: High-speed method

2021-09-01

ISO/DIS 24329 Low-protein natural rubber latex concentrate Speci-fication

2021-09-07

26. ISO/TC 46 – Information and documentation

ISO/DIS 233-3 Information and documentation Transliteration of Arabic characters into Latin characters Part 3: Persian language Transliteration

2021-09-14

27. ISO/TC 46/SC 8 – Quality – Statistics and

performance evaluation

ISO/DIS 2789 Information and documentation International library statistics

2021-09-09

28. ISO/TC 46/SC 9 – Identification and description

ISO/DIS 23527 Information and documentation Research activity identifier information technology Learning, education, training and research (RAiD)

2021-09-20

29. ISO/TC 59/SC 2 – Terminology and harmoni-

zation of languages

ISO/DIS 6707-3 Buildings and civil engineering works Vocabulary Part 3: Sustainability terms

2021-09-20

30. ISO/TC 61/SC 2 – Mechanical behavior

ISO/DIS 11403-2 Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties

2021-09-27

31. ISO/TC 61/SC 14 – Environmental aspects

ISO/DIS 5412 Biodegradable plastic shopping bags for industrial composting

2021-09-09

ISO/DIS 5424 Industrial compostable drinking straws 2021-09-09

9/2021

www.iss.rs 69

32. ISO/TC 67/SC 2 – Pipeline transportation systems

ISO/DIS 24139-1 Petroleum and natural gas industries Corrosion resistant alloy clad bends and fittings for pipeline transportation system Part 1: Clad bends

2021-09-20

33. ISO/TC 79/SC 5 – Magnesium and alloys of cast or wrought magnesium

ISO/DIS 4155 Magnesium and magnesium alloys Determination of nickel Inductively coupled plasma optical emission spectrometric method

2021-09-30

ISO/DIS 4177 Magnesium and magnesium alloys Determination of chromium Inductively coupled plasma optical emission spectrometric method

2021-09-30

ISO/DIS 4181 Magnesium and magnesium alloys Determination of strontium Inductively coupled plasma optical emission spectrometric method

2021-09-30

ISO/DIS 4188 Magnesium and magnesium alloys Determination of arsenic Inductively coupled plasma optical emission spectrometric method

2021-09-30

ISO/DIS 4189 Magnesium and magnesium alloys Determination of sodium Inductively coupled plasma optical emission spectrometric method

2021-09-30

34. ISO/TC 85 – Nuclear energy, nuclear technolo-gies, and radiological protection

ISO/DIS 12749-2 Nuclear energy, nuclear technologies, and radiological protection Vocabulary Part 2: Radiological protection

2021-09-03

35. ISO/TC 85/SC 2 – Radiological protection

ISO/DIS 20044 Measurement of radioactivity in the environment Air: aerosols Test method using sampling by filter media

2021-09-28

36. ISO/TC 102/SC 3 – Physical testing

ISO/DIS 7992 Iron ores for blast furnace feedstocks Determination of reduction under load

2021-09-09

37. ISO/TC 107/SC 4 – Hot dip coatings (galvanized, etc.)

ISO/DIS 1461 Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methods

2021-09-28

9/2021

70 www.iss.rs

38. ISO/TC 108/SC 2 – Measurement and evaluation

of mechanical vibration and shock as applied to machines, vehicles and structures

ISO/DIS 21940-21 Mechanical vibration Rotor balancing Part 21: Description and evaluation of balancing machines

2021-09-28

39. ISO/TC 111/SC 3 – Components and accessories

ISO/DIS 2415 Forged shackles for general lifting purposes Dee shackles and bow shackles

2021-09-15

40. ISO/TC 121/SC 3 – Respiratory devices and related equipment used for patient care

IEC 80601-2-26:2019/ DAmd 1

Medical electrical equipment Part 2-26: Particular requirements for the basic safety and essential perfor-mance of electroencephalographs Amendment 1

2021-09-10

IEC 80601-2-59:2017/ DAmd 1

Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential perfor-mance of screening thermographs for human febrile temperature screening Amendment 1

2021-09-10

41. ISO/TC 122 – Packaging

ISO/DIS 15750-3 Packaging Steel drums Part 3: Inserted flange-type closure systems

2021-09-13

42. ISO/TC 126/SC 3 – Vape and vapour products

ISO/DIS 24211 Vapour products Determination of selected carbonyls in vapour product emissions

2021-09-21

43. ISO/TC 131/SC 4 – Connectors and similar products and components

ISO/DIS 16028 Hydraulic fluid power Flush-face type, quick-action couplings for use at pressures of 10 MPa (200 bar) to 31,5 MPa (315 bar) Specifications

2021-09-29

44. ISO/TC 135/SC 3 – Ultrasonic testing

ISO/DIS 18563-1 Non-destructive testing Characterization and verifi-cation of ultrasonic phased array equipment Part 1: Instruments

2021-09-02

45. ISO/TC 150/SC 2 – Cardiovascular implants and extracorporeal systems

ISO 18242:2016/DAmd 1 Cardiovascular implants and extracorporeal systems Centrifugal blood pumps Amendment 1: Worst-case conditions for testing

2021-09-01

9/2021

www.iss.rs 71

46. ISO/TC 154 – Processes, data elements and documents in commerce, industry and administration

ISO/DIS 34000 Date and time Concepts and vocabulary 2021-09-16

47. ISO/TC 156/SC 1 – Corrosion control engineering life cycle

ISO/DIS 24239 Fossil Fuel Power Plants Corrosion Control Engineering Life Cycle General Requirements

2021-09-02

48. ISO/TC 172/SC 3 – Optical materials and components

ISO/DIS 9802 Raw optical glass Vocabulary 2021-09-13

49. ISO/TC 176/SC 3 – Supporting technologies

ISO/DIS 10010 Quality management Organizational quality culture Guidance to achieve sustained success

2021-09-23

50. ISO/TC 180/SC 1 – Climate - Measurement and data

ISO/DIS 9845-1 Solar energy Reference solar spectral irradiance at the ground at different receiving conditions Part 1: Direct normal and hemispherical solar irradiance for air mass 1,5

2021-09-13

51. ISO/TC 182 – Geotechnics

ISO 17892-12:2018/ DAmd 2

Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of liquid and plastic limits Amendment 2

2021-09-15

52. ISO/TC 184/SC 4 – Industrial data

ISO/DIS 8000-150 Data quality Part 150: Data quality management: Roles and responsibilities

2021-09-23

53. ISO/TC 204 – Intelligent transport systems

ISO/DIS 5345 Intelligent transport systems Identifiers Processes 2021-09-03

54. ISO/TC 206 – Fine ceramics

ISO/DIS 18755 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of thermal diffusivity of monolithic ceramics by flash method

2021-09-30

9/2021

72 www.iss.rs

55. ISO/TC 207/SC 2 – Environmental auditing and

related environmental investigations

ISO/DIS 14015 Environmental management Guidelines for Environ-mental Due Diligence Assessment

2021-09-07

56. ISO/TC 212 – Clinical laboratory testing and

in vitro diagnostic test systems

ISO/DIS 17593 Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self- -testing of oral anticoagulant therapy

2021-09-01

57. ISO/TC 215/SC 1 – Genomics Informatics

ISO/DIS 4454 Genomics informatics Phenopackets: A format for phenotypic data exchange

2021-09-28

58. ISO/TC 220 – Cryogenic vessels

ISO/DIS 21012 Cryogenic vessels Hoses 2021-09-17

59. ISO/TC 224 – Service activities relating to

drinking water supply, wastewater and

stormwater systems

ISO/DIS 24525 Activities relating to drinking water and wastewater services Guidelines for the management of basic on- -site domestic wastewater services Operation and maintenance activities

2021-09-07

60. ISO/TC 228 – Tourism and related services

ISO/DIS 13810 Tourism and related services Visits to industrial tourism organizations and to natural, cultural and historical sites Requirements and recommendations

2021-09-29

61. ISO/TC 229 – Nanotechnologies

ISO/DIS 80004-1 Nanotechnologies Vocabulary Part 1: Core terms and definitions

2021-09-14

62. ISO/TC 249 – Traditional Chinese medicine

ISO/DIS 23964 Traditional Chinese Medicine Saposhnikovia divaricata root and rhizome

2021-09-16

9/2021

www.iss.rs 73

63. ISO/TC 261 – Additive manufacturing

ISO/ASTM DIS 52931 Additive manufacturing of metals Environment, health and safety General principles for use of metallic materials

2021-09-09

64. ISO/TC 267 – Facility management

ISO/DIS 41018 Facility management Development of a facility mana-gement policy

2021-09-14

65. ISO/TC 269/SC 2 – Rolling stock

ISO/DIS 24478 Railway applications Braking Generic vocabulary 2021-09-20

66. ISO/TC 276 – Biotechnology

ISO/DIS 20691 Biotechnology Requirements for data formatting and description in the life sciences

2021-09-21

ISO/DIS 24088-1 Biotechnology Biobanking Requirements for the collection, processing, storage and transportation of microorganisms Part 1: Bacteria and archaea

2021-09-02

ISO/DIS 24603 Biotechnology Biobanking Requirements for human and mouse pluripotent stem cells

2021-09-06

ISO/DIS 24651 Biotechnology Biobanking Requirements for human mesenchymal stromal cells derived from bone marrow

2021-09-09

67. ISO/TC 292 – Security and resilience

ISO/DIS 22379 Security and resilience Guidelines for hosting and organizing citywide or regional events

2021-09-13

68. ISO/TC 296 – Bamboo and rattan

ISO/DIS 21629-2 Bamboo floorings Part 2: Outdoor use 2021-09-28

9/2021

74 www.iss.rs

2021

1. ISO/CASCO – Committee on conformity

assessment

ISO/IEC 17030:2021 Conformity assessment General requirements for third-party marks of conformity

2021-09-09

2. ISO/CASCO – Committee on conformity

assessment

ISO/IEC/IEEE 8802-1AX:2021 Telecommunications and exchange between infor-mation technology systems Requirements for local and metropolitan area networks Part 1AX: Link aggregation

2021-09-13

ISO/IEC/IEEE 8802-1Q:2020/ Amd 2:2021

Telecommunications and exchange between infor-mation technology systems Requirements for local and metropolitan area networks Part 1Q: Bridges and bridged networks Amendment 2: YANG data model

2021-09-13

ISO/IEC/IEEE 8802-1Q:2020/ Amd 3:2021

Telecommunications and exchange between infor-mation technology systems Requirements for local and metropolitan area networks Part 1Q: Bridges and bridged networks Amendment 3: Virtual station interface (VSI) discovery and con-figuration protocol (VDP) extension to support network virtualization overlays over layer 3 (NVO3)

2021-09-13

3. ISO/IEC JTC 1/SC 7 – Software and

systems engineering

ISO/IEC 24773-3:2021 Software and systems engineering Certification of software and systems engineering professionals

Part 3: Systems engineering

2021-09-02

9/2021

www.iss.rs 75

4. ISO/IEC JTC 1/SC 17 – Cards and security devices for personal identification

ISO/IEC 18013-5:2021 Personal identification ISO-compliant driving licence Part 5: Mobile driving licence (mDL) application

2021-09-30

ISO/IEC 18745-2:2021 Test methods for machine readable travel docu-ments (MRTD) and associated devices Part 2: Test methods for the contactless interface

2021-09-16

5. ISO/IEC JTC 1/SC 27 – Information security, cybersecurity and privacy protection

ISO/IEC 18014-2:2021 Information security Time-stamping services Part 2: Mechanisms producing independent tokens

2021-09-09

ISO/IEC 18033-1:2021 Information security Encryption algorithms Part 1: General

2021-09-10

ISO/IEC 27036-1:2021 Cybersecurity Supplier relationships Part 1: Overview and concepts

2021-09-09

ISO/IEC 27551:2021 Information security, cybersecurity and privacy protection Requirements for attribute-based unlinkable entity authentication

2021-09-07

6. ISO/IEC JTC 1/SC 29 – Coding of audio, picture, multimedia and hypermedia information

ISO/IEC 10918-7:2021 Information technology Digital compression and coding of continuous-tone still images Part 7: Reference software

2021-09-15

ISO/IEC 15444-16:2021 Information technology JPEG 2000 image coding system Part 16: Encapsulation of JPEG 2000 images into ISO/IEC 23008-12

2021-09-15

ISO/IEC 23001-10:2020/ Amd 1:2021

Information technology MPEG systems techno-logies Part 10: Carriage of timed metadata metrics of media in ISO base media file format Amendment 1: Support for content-guided trans-coding and spatial relationship of immersive media

2021-09-20

7. ISO/IEC JTC 1/SC 31 – Automatic identifi-cation and data capture techniques

ISO/IEC 22603-1:2021 Information technology Digital representation of product information Part 1: General requirements

2021-09-28

8. ISO/IEC JTC 1/SC 32 – Data management and interchange

ISO/IEC 19075-2:2021 Information technology Guidance for the use of database language SQL Part 2: Time-related information

2021-09-01

9/2021

76 www.iss.rs

ISO/IEC 19075-3:2021 Information technology Guidance for the use of database language SQL Part 3: SQL embedded in programs using the JavaTM programming language

2021-09-01

ISO/IEC 19075-4:2021 Information technology Guidance for the use of database language SQL Part 4: Routines and

2021-09-01

ISO/IEC 19075-5:2021 Information technology Guidance for the use of database language SQL Part 5: Row pattern recognition

2021-09-01

ISO/IEC 19075-6:2021 Information technology Guidance for the use of database language SQL Part 6: Support for JSON

2021-09-01

ISO/IEC 19075-7:2021 Information technology Guidance for the use of database language SQL Part 7: Polymorphic table functions

2021-09-01

ISO/IEC 19075-8:2021 Information technology Guidance for the use of database language SQL Part 8: Multidimensi-onal arrays

2021-09-01

ISO/IEC 19763-16:2021 Information technology Metamodel framework for interoperability (MFI) Part 16: Metamodel for document model registration

2021-09-07

9. ISO/IEC JTC 1/SC 41 – Internet of Things

and related technologies

ISO/IEC 21823-3:2021 Internet of things (IoT) Interoperability for IoT systems Part 3: Semantic interoperability

2021-09-22

10. ISO/PC 325 – Sex toys - Design and safety

requirements for products in direct

contact with genitalia, the anus, or both

ISO 3533:2021 Sex toys Design and safety requirements for products in direct contact with genitalia, the anus, or both

2021-09-24

11. ISO/TC 1 – Screw threads

ISO 965-1:2013/Amd 1:2021 ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data Amendment 1

2021-09-29

12. ISO/TC 4/SC 12 – Ball bearings

ISO 20515:2021 Rolling bearings Radial bearings, retaining slots Dimensions, geometrical product specifications (GPS) and tolerance values

2021-09-22

9/2021

www.iss.rs 77

13. ISO/TC 8/SC 1 – Maritime safety

ISO 24136:2021 Ships and marine technology Pilot ladder winch reels

2021-09-06

14. ISO/TC 8/SC 11 – Intermodal and Short Sea Shipping

ISO 23323:2021 Ships and marine technology Specification for software-based planned maintenance systems

2021-09-17

15. ISO/TC 8/SC 13 – Marine technology

ISO 23446:2021 Marine technology Product water quality of seawater reverse osmosis (RO) desalination Guidelines for municipal water supply

2021-09-29

16. ISO/TC 20/SC 10 – Aerospace fluid systems and components

ISO 8153-2:2021 Aerospace fluid systems and components Vocabulary Part 2: Fittings and couplings

2021-09-02

17. ISO/TC 20/SC 14 – Space systems and operations

ISO 23020:2021 Space systems Determination of test methods to characterize material or component properties required for break-up models used for Earth re-entry

2021-09-15

ISO 23129:2021 Space systems Thermal control coatings for spacecraft Atomic oxygen protective coatings on polyimide film

2021-09-27

ISO 23670:2021 Space systems Vibration testing 2021-09-13

18. ISO/TC 20/SC 16 – Unmanned aircraft systems

ISO 23629-7:2021 UAS traffic management (UTM) Part 7: Data model for spatial data

2021-09-29

19. ISO/TC 22/SC 31 – Data communication

ISO 15765-5:2021 Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 5: Speci-fication for an in-vehicle network connected to the diagnostic link connector

2021-09-22

20. ISO/TC 22/SC 33 – Vehicle dynamics and chassis components

ISO 4138:2021 Passenger cars Steady-state circular driving behaviour Open-loop test methods

2021-09-20

9/2021

78 www.iss.rs

21. ISO/TC 22/SC 35 – Lighting and visibility

ISO 13837:2021 Road vehicles Safety glazing materials Method for the determination of solar transmittance

2021-09-28

22. ISO/TC 22/SC 36 – Safety and impact testing

ISO/TS 13396:2021 Road vehicles Sled test method to enable the evaluation of side impact protection of child restraint systems Essential parameters

2021-09-29

23. ISO/TC 22/SC 37 – Electrically propelled vehicles

ISO 23274-2:2021 Hybrid-electric road vehicles Exhaust emissions and fuel consumption measurements Part 2: Externally chargeable vehicles

2021-09-08

24. ISO/TC 22/SC 39 – Ergonomics

ISO 2575:2021 Road vehicles Symbols for controls, indicators and tell-tales

2021-09-07

25. ISO/TC 23/SC 7 – Equipment for harvesting and conservation

ISO 6689:2021 Equipment for harvesting Combine harvesters and functional components Vocabulary

2021-09-03

26. ISO/TC 28 – Petroleum and related products, fuels and lubricants from natural or synthetic sources

ISO 20884:2019/Amd 1:2021 Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry Amendment 1: Addition of the SSD detector to the Monochromatic excitation part of Table 1

2021-09-28

27. ISO/TC 31 – Tyres, rims and valves

ISO 19447:2021 Passenger car tyres Method for measuring ice grip performance Loaded new tyres

2021-09-17

28. ISO/TC 33 – Refractories

ISO 13765-7:2021 Refractory mortars Part 7: Determination of permanent change in dimensions on heating

2021-09-27

ISO 8840:2021 Refractory materials Determination of bulk density of granular materials (grain density)

2021-09-14

9/2021

www.iss.rs 79

29. ISO/TC 34/SC 5 – Milk and milk products

ISO 23970:2021 Milk, milk products and infant formula Determi-nation of melamine and cyanuric acid by liquid chromatography and tandem mass spectrometry (LC-MS/MS)

2021-09-16

30. ISO/TC 34/SC 6 – Meat, poultry, fish, eggs and their products

ISO 23722:2021 Meat and meat products Vocabulary 2021-09-27

ISO 23781:2021 Operating procedures of pig slaughtering 2021-09-07

ISO 23854:2021 Fermented meat products Specification 2021-09-07

ISO 23855:2021 Frozen surimi Specification 2021-09-08

31. ISO/TC 34/SC 12 – Sensory analysis

ISO 11132:2021 Sensory analysis Methodology Guidelines for the measurement of the performance of a quantitative descriptive sensory panel

2021-09-08

32. ISO/TC 37/SC 2 – Terminology workflow and language coding

ISO 12616-1:2021 Terminology work in support of multilingual communication Part 1: Fundamentals of trans-lation-oriented terminography

2021-09-02

33. ISO/TC 41/SC 1 – Friction

ISO 9982:2021 Belt drives Pulleys and V-ribbed belts for industrial applications PH, PJ, PK, PL and PM profiles: dimensions

2021-09-01

34. ISO/TC 43/SC 1 – Noise

ISO 3381:2021 Railway applications Acoustics Noise measu-rement inside railbound vehicles

2021-09-08

35. ISO/TC 43/SC 2 – Building acoustics

ISO 23591:2021 Acoustic quality criteria for music rehearsal rooms and spaces

2021-09-22

36. ISO/TC 44/SC 10 – Quality management in the field of welding

ISO 13918:2017/Amd 1:2021 Welding Studs and ceramic ferrules for arc stud welding Amendment 1

2021-09-07

9/2021

80 www.iss.rs

ISO 3834-1:2021 Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements

2021-09-10

37. ISO/TC 45/SC 1 – Rubber and plastics

hoses and hose assemblies

ISO 13775-1:2021 Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applications

2021-09-17

ISO 2929:2021 Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification

2021-09-17

38. ISO/TC 45/SC 4 – Products (other

than hoses)

ISO 22941:2021 Rubber sheets for livestock Dairy cattle Specification

2021-09-14

ISO 6450:2021 Rubber- or plastics-coated fabrics Determination of resistance to liquids

2021-09-15

39. ISO/TC 54 – Essential oils

ISO/TS 24106:2021 Essential oils Name harmonization of components 2021-09-09

40. ISO/TC 59/SC 8 – Sealants

ISO 21265:2021 Building and civil engineering sealants Assessment of the fungal growth on sealant surfaces

2021-09-22

41. ISO/TC 67 – Materials, equipment and

offshore structures for petroleum,

petrochemical and natural gas industries

ISO 18797-2:2021 Petroleum, petrochemical and natural gas indu-stries External corrosion protection of risers by coatings and linings Part 2: Maintenance and field repair coatings for riser pipes

2021-09-13

42. ISO/TC 68/SC 8 – Reference data for

financial services

ISO 24165-1:2021 Digital token identifier (DTI) Registration, assignment and structure Part 1: Method for registration and assignment

2021-09-28

ISO 24165-2:2021 Digital token identifier (DTI) Registration, assignment and structure Part 2: Data elements for registration

2021-09-28

9/2021

www.iss.rs 81

43. ISO/TC 69/SC 4 – Applications of statistical methods in product and process management

ISO 7870-4:2021 Control charts Part 4: Cumulative sum charts 2021-09-21

44. ISO/TC 94/SC 14 – Firefighters' personal equipment

ISO 15384:2018/Amd 1:2021 Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing Amendment 1

2021-09-27

45. ISO/TC 106/SC 1 – Filling and restorative materials

ISO 6877:2021 Dentistry Endodontic obturating materials 2021-09-08

46. ISO/TC 107 – Metallic and other inorganic coatings

ISO 14922:2021 Thermal spraying Quality requirements for manufacturers of thermal sprayed coatings

2021-09-22

47. ISO/TC 108/SC 5 – Condition monitoring and diagnostics of machine systems

ISO 18436-6:2021 Condition monitoring and diagnostics of machines Requirements for certification of personnel

Part 6: Acoustic emission

2021-09-15

48. ISO/TC 113/SC 5 – Instruments, equipment and data management

ISO 23350:2021 Hydrometry Catching-type liquid precipitation measuring gauges

2021-09-24

49. ISO/TC 130 – Graphic technology

ISO 12642-3:2021 Graphic technology Input data for characteri-zation of 4-colour process printing Part 3: Extended data set including near neutral scale

2021-09-30

ISO 20616-1:2021 Graphic technology File format for quality control and metadata Part 1: Print requirements eX-change (PRX)

2021-09-30

50. ISO/TC 131/SC 3 – Cylinders

ISO/TS 13725:2021 Hydraulic fluid power Method for evaluating the buckling load of a hydraulic cylinder

2021-09-16

9/2021

82 www.iss.rs

51. ISO/TC 134 – Fertilizers, soil conditioners and beneficial substances

ISO 20620:2021 Fertilizers and soil conditioners Determination of total nitrogen by combustion

2021-09-30

52. ISO/TC 136 – Furniture

ISO 7170:2021 Furniture Storage units Test methods for the determination of strength, durability and stability

2021-09-20

53. ISO/TC 138/SC 2 – Plastics pipes and fittings for water supplies

ISO 15877-3:2009/ Amd 2:2021

Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings Amendment 2

2021-09-28

ISO 9624:2019/Amd 1:2021 Thermoplastics piping systems for fluids under pressure Flange adapters and loose backing flanges Mating dimensions Amendment 1

2021-09-29

54. ISO/TC 142 – Cleaning equipment for air and other gases

ISO 29461-1:2021 Air intake filter systems for rotary machinery Test methods Part 1: Static filter elements

2021-09-15

55. ISO/TC 146/SC 2 – Workplace atmospheres

ISO 24095:2021 Workplace air Guidance for the measurement of respirable crystalline silica

2021-09-13

56. ISO/TC 150 – Implants for surgery

ISO 13179-1:2021 Implants for surgery Coatings on metallic surgical implants Part 1: Plasma-sprayed coatings derived from titanium or titanium-6 aluminum-4 vanadium alloy powders

2021-09-30

57. ISO/TC 150/SC 2 – Cardiovascular implants and extracorporeal systems

ISO/TS 17137:2021 Cardiovascular implants and extracorporeal systems Cardiovascular absorbable implants

2021-09-15

58. ISO/TC 159/SC 5 – Ergonomics of the physical environment

ISO 14505-4:2021 Ergonomics of the thermal environment Evalu-ation of thermal environments in vehicles Part 4: Determination of the equivalent temperature by means of a numerical manikin

2021-09-15

9/2021

www.iss.rs 83

ISO 23456-1:2021 Dynamic signs in physical environments Part 1: General requirements

2021-09-14

59. ISO/TC 163/SC 1 – Test and measurement methods

ISO 23327:2021 Hygrothermal performance of building materials and products Determination of moisture adsorption/desorption properties in response to periodic temperature variation

2021-09-28

60. ISO/TC 172/SC 3 – Optical materials and components

ISO 9211-7:2021 Optics and photonics Optical coatings Part 7: Minimum requirements for neutral beam splitter coatings

2021-09-16

61. ISO/TC 182 – Geotechnics

ISO 22476-4:2021 Geotechnical investigation and testing Field testing Part 4: Prebored pressuremeter test by Ménard procedure

2021-09-01

62. ISO/TC 184 – Automation systems and integration

ISO/IEC TR 63306-2:2021 Smart manufacturing standards map (SM2) Part 2: Catalogue

2021-09-22

63. ISO/TC 184/SC 4 – Industrial data

ISO 10303-59:2021 Industrial automation systems and integration Product data representation and exchange Part 59: Integrated generic resource: Quality of product shape data

2021-09-07

64. ISO/TC 190/SC 3 – Chemical and physical characterization

ISO 11916-3:2021 Soil quality Determination of selected explosives and related compounds Part 3: Method using liquid chromatography-tandem mass spectrometry (LC-MS/MS)

2021-09-17

65. ISO/TC 204 – Intelligent transport systems

ISO/SAE PAS 22736:2021 Taxonomy and definitions for terms related to driving automation systems for on-road motor vehicles

2021-09-01

9/2021

84 www.iss.rs

ISO/TR 4445:2021 Intelligent transport systems Mobility integration Role model of ITS service application in smart

cities

2021-09-06

66. ISO/TC 205 – Building environment design

ISO 11855-2:2021 Building environment design Embedded radiant heating and cooling systems Part 2: Determi-nation of the design heating and cooling capacity

2021-09-15

ISO/TS 23764:2021 Methodology for achieving non-residential zero-energy buildings (ZEBs)

2021-09-24

67. ISO/TC 207/SC 4 – Environmental performance evaluation

ISO 14030-1:2021 Environmental performance evaluation Green debt instruments Part 1: Process for green bonds

2021-09-14

ISO 14030-2:2021 Environmental performance evaluation Green debt instruments Part 2: Process for green loans

2021-09-14

ISO 14030-4:2021 Environmental performance evaluation Green debt instruments Part 4: Verification programme requirements

2021-09-14

68. ISO/TC 213 – Dimensional and geometrical product specifications and verification

ISO 10360-13:2021 Geometrical product specifications (GPS) Accep-tance and reverification tests for coordinate mea-suring systems (CMS) Part 13: Optical 3D CMS

2021-09-09

69. ISO/TC 215 – Health informatics

IEC 80001-1:2021 Safety, effectiveness and security in the implemen-tation and use of connected medical devices or connected health software Part 1: Application of risk management

2021-09-22

70. ISO/TC 216 – Footwear

ISO 19957:2021 Footwear Test methods for heels Heel pin holding strength

2021-09-14

ISO/TR 16178:2021 Footwear Critical substances potentially present in footwear and footwear components Lists of critical chemical substances

2021-09-22

71. ISO/TC 218 – Timber

ISO 24294:2021 Timber Round and sawn timber Vocabulary 2021-09-09

9/2021

www.iss.rs 85

72. ISO/TC 229 – Nanotechnologies

ISO/TS 23151:2021 Nanotechnologies Particle size distribution for cellulose nanocrystals

2021-09-30

73. ISO/TC 262 – Risk management

ISO 31030:2021 Travel risk management Guidance for organi-zations

2021-09-14

74. ISO/TC 269/SC 2 – Rolling stock

ISO 22749-1:2021 Railway applications Suspension components Part 1: Characteristics and test methods for elastomer-mechanical parts

2021-09-28

75. ISO/TC 276 – Biotechnology

ISO 21709:2020/Amd 1:2021 Biotechnology Biobanking Process and quality requirements for establishment, maintenance and characterization of mammalian cell lines Amendment 1

2021-09-08

76. ISO/TC 281 – Fine bubble technology

ISO 20480-3:2021 Fine bubble technology General principles for usage and measurement of fine bubbles Part 3: Methods for generating fine bubbles

2021-09-22

ISO 24261-2:2021 Fine bubble technology Elimination method for sample characterization Part 2: Fine bubble elimination techniques

2021-09-20

77. ISO/TC 301 – Energy management and

energy savings

ISO 50005:2021 Energy management systems Guidelines for a phased implementation

2021-09-14

78. ISO/TC 309 – Governance of organizations

ISO 37000:2021 Governance of organizations Guidance 2021-09-14

9/2021

86 www.iss.rs

(IEC)

2021

,

.

-

2021.

1. TC 14 – Power transformers

IEC 60076-25 ED1 Power transformers Part 25: Neutral grounding resistors

2021-09-17

2. TC 23/SC 23A – Cable management systems

IEC 61537 ED3 Cable management Cable tray systems and cable ladder systems

2021-09-10

IEC 63355 ED1 Cable management systems Test method for content of halogens

2021-09-03

3. TC 34 – Lamps and related equipment

IEC 62386-101 ED3 Digital addressable lighting interface Part 101: General requirements System components

2021-09-17

IEC 62386-102 ED3 Digital addressable lighting interface Part 102: General requirements Control gear

2021-09-17

9/2021

www.iss.rs 87

2021.

IEC 62386-103 ED2 Digital addressable lighting interface Part 103: General requirements Control devices

2021-09-17

4. TC 34/SC 34A – Lamps

IEC 60810/AMD2 ED5 Amendment 2 Lamps, light sources and LED packages for road vehicles Performance requirements

2021-09-03

5. TC 46 – Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories

IEC 62037-7 ED1 PASSIVE RF AND MICROWAVE DEVICES, INTER-MODULATION LEVEL MEASUREMENT Part 7: Field measurements of passive intermodulation

2021-09-10

IEC 62037-7 ED1 PASSIVE RF AND MICROWAVE DEVICES, INTER-MODULATION LEVEL MEASUREMENT Part 7: Field measurements of passive intermodulation

2021-09-03

IEC 62037-8 ED1 Measurement of passive intermodulation generated by objects exposed to RF radiation

2021-09-10

IEC 62037-8 ED1 Measurement of passive intermodulation generated by objects exposed to RF radiation

2021-09-03

6. TC 46/SC 46A – Coaxial cables

IEC 61196-4 ED4 Coaxial communication cables Part 4: Sectional specification for radiating cables

2021-09-17

IEC 61196-4-1 ED2 Coaxial communication cables Part 4-1: Blank detail specification for radiating cables

2021-09-17

7. TC 46/SC 46F – RF and microwave passive components

IEC 61169-69 ED1 Radio Frequency Connectors Part 69: Sectional speci-fication for series SMP3 RF coaxial connectors

2021-09-10

IEC 61169-69 ED1 Radio Frequency Connectors- Part 69: Sectional speci-fication for series SMP3 RF coaxial connectors

2021-09-03

8. TC 48/SC 48B – Electrical connectors

IEC 63171-4 ED1 Connectors for electrical and electronic equipment Part 4: Detail specification for shielded or unshielded, free and fixed connectors with up to 8 ways Mechanical mating information, pin assignment and additional requirements for Type 4

2021-09-24

9. TC 59/SC 59F – Surface cleaning appliances

IEC/ASTM 62885-6 ED2 Surface cleaning appliances Part 6: Wet hard floor cleaning appliances for household or similar use Methods for measuring the performance

2021-09-24

9/2021

88 www.iss.rs

2021.

10. TC 59/SC 59L – Small household appliances

IEC 61855 ED2 Household and similar use electrical hair care appliances Methods for measuring the performance

2021-09-10

11. TC 62/SC 62B – Diagnostic imaging equipment

IEC 60601-2-54 ED2 Medical electrical equipment Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

2021-09-10

12. TC 62/SC 62D – Electromedical equipment

IEC 80601-2-26/ AMD1 ED1

Amendment 1 Medical electrical equipment Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograph

2021-09-10

IEC 80601-2-59/ AMD1 ED2

Amendment 1 Medical electrical equipment Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening

2021-09-10

13. TC 65/SC 65B – Measurement and control devices

IEC 63206 ED1 INDUSTRIAL-PROCESS CONTROL SYSTEMS RECORDERS

2021-09-10

14. TC 65/SC 65C – Industrial networks

IEC 61139-2 ED1 Industrial networks Single-drop digital communication interface Part 2: Functional safety extensions

2021-09-03

15. TC 80 – Maritime navigation and radio-communication equipment and systems

IEC 63173-2 ED1 Maritime navigation and radiocommunication equ-ipment and systems Data interface Part 2: Secure communication between ship and shore (SECOM)

2021-09-03

16. TC 82 – Solar photovoltaic energy systems

IEC 61215-1-3/ AMD1 ED2

Amendment 1 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-3:

Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules

2021-09-03

IEC 61215-1-4/ AMD1 ED2

Amendment 1 Terrestrial photovoltaic (PV) modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules

2021-09-03

9/2021

www.iss.rs 89

2021.

17. TC 86/SC 86B – Fibre optic interconnecting

devices and passive components

IEC 61300-2-43 ED3 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 2-43: Tests Screen testing of return loss of single-mode PC optical fibre connectors

2021-09-10

IEC 61300-2-5 ED4 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 2-5: Tests Torsion

2021-09-17

IEC 61300-2-5 ED4 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 2-5: Tests Torsion

2021-09-10

IEC 61300-3-35 ED3 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 3-35: Examinations and measurements Visual inspection of fibre optic connectors and fibre-stub transceivers

2021-09-17

IEC 61300-3-35 ED3 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 3-35: Examinations and measurements Visual inspection of fibre optic connectors and fibre-stub transceivers

2021-09-10

IEC 61300-3-4 ED4 Fibre optic interconnecting devices and passive compo-nents Basic test and measurement procedures Part 3-4: Examinations and measurements Attenuation

2021-09-10

18. TC 99 – System engineering and erection of

electrical power installations in systems with

nominal voltages above 1 kV a.c. and 1,5 kV

d.c., particularly concerning safety aspects

IEC 60071-12 ED1 Insulation co-ordination Part 12: Application guidelines for LCC HVDC converter stations

2021-09-24

19. TC 103 – Transmitting equipment for

radiocommunication

IEC 63098-2 ED1 Transmitting and receiving equipment for radiocom-munication Radio-over-fibre technologies and their performance standard Part 2: Radio over fibre based fronthaul network for railway communication system

2021-09-17

20. TC 110 – Electronic display devices

IEC 62629-62-11 ED1 3D display devices Part 62-11: Measurement methods for virtual-image type Optical

2021-09-10

9/2021

90 www.iss.rs

2021.

21. TC 113 – Nanotechnology for electrotechnical

products and systems

ISO 80004-1 ED1 Nanotechnologies Vocabulary Part 1: Core terms and definitions

2021-09-24

ISO 80004-1 ED1 Nanotechnologies Vocabulary Part 1: Core terms and definitions

2021-09-17

22. TC 117 Solar thermal electric plants

IEC 62862-5-2 ED1 Solar thermal electric plants Part 5-2: Systems and components General requirements and test methods for large-size linear Fresnel collectors

2021-09-17

9/2021

www.iss.rs 91

IEC

2021

1. IECEE – IEC Conformity Assessment

for Electrotechnical Equipment and

Components

IECEE TRF 60320-2-1A:2021 This Test Report Form applies to: IEC 60320-2-1:2018 in conjunction with IEC 60320-1:2015, IEC 60320-1:2015/AMD1:2018

2021-09-24

IECEE TRF 60335-2-24M:2021 This Test Report Form applies to: IEC 60335-2-65:2002, IEC 60335-2-65:2002/AMD1:2008, IEC 60335-2-65:2002/AMD2:2015 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/ /AMD1:2013, IEC 60335-1:2010/AMD2:2016

2021-09-30

IECEE TRF 60335-2-28J:2021 This Test Report Form applies to: IEC 60335-2-28:2002, IEC 60335-2-28:2002/AMD1:2008 used in conjunction with IEC 60335-1:2010

2021-09-30

IECEE TRF 60335-2-34K:2021 This Test Report Form applies to: IEC 60335-2-34:2021 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/ /AMD2:2016

2021-09-24

IECEE TRF 60335-2-40T:2021 This Test Report Form applies to: IEC 60335-2-40:2018 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/ /AMD2:2016

2021-09-03

IECEE TRF 60335-2-44I:2021 This Test Report Form applies to: IEC 60335-2-44:2002, IEC 60335-2-44:2002/AMD1:2008, IEC 60335-2-44:2002/AMD2:2011 in conjunction with IEC 60335-1:2010

2021-09-30

IECEE TRF 60335-2-78H:2021 This Test Report Form applies to: IEC 60335-2-78:2002, IEC 60335-2-78:2002/AMD1:2008, IEC 60335-2-78:2002/AMD2:2019 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/AMD2:2016

2021-09-30

9/2021

92 www.iss.rs

IECEE TRF 60335-2-81F:2021 This Test Report Form applies to: IEC 60335-2-81:2015, IEC 60335-2-81:2015/AMD1:2017, IEC 60335-2-81:2015/AMD2:2020 in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/AMD2:2016

2021-09-24

IECEE TRF 60335-2-82G:2021 This Test Report Form applies to: IEC 60335-2-82:2002, IEC 60335-2-82:2002/AMD1:2008, IEC 60335-2-82:2002/AMD2:2015 for use in conjunction with IEC 60335-1:2010, IEC 60335-1:2010/ /AMD1:2013, IEC 60335-1:2010/AMD2:2016

2021-09-30

IECEE TRF 60598-2-11E:2021 This Test Report Form applies to: IEC 60598-2-11:2013 used in conjunction with IEC 60598-1:2020

2021-09-14

IECEE TRF 60598-2-21C:2021 This Test Report Form applies to: IEC 60598-2-21:2014 used in conjunction with IEC 60598-1:2014, IEC 60598-1:2014/AMD1:2017

2021-09-16

IECEE TRF 60598-2-21D:2021 This Test Report Form applies to: IEC 60598-2-21:2014 used in conjunction with IEC 60598-1:2020

2021-09-16

IECEE TRF 60598-2-24H:2021 This Test Report Form applies to: IEC 60598-2-24:2013 used in conjunction with IEC 60598-1:2020

2021-09-24

IECEE TRF 60601-1-11G:2021 This Test Report Form applies to: IEC 60601-1-11:2015, IEC 60601-1-11:2015/AMD1:2020 for use in conjunction with IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012, IEC 60601-1:2005/AMD2:2020

2021-09-16

IECEE TRF 60601-2-2H:2021 This Test Report Form applies to: IEC 60601-2-2:2017 for use in conjunction with IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012

2021-09-03

IECEE TRF 60745-2-7C:2021 This Test Report Form applies to: IEC 60745-2-7:1989 used in conjunction with IEC 60745-1:1982

2021-09-28

IECEE TRF 60947-4-3D:2021 This Test Report Form applies to: IEC 60947-4-3:2020 2021-09-28

IECEE TRF 61029-1C:2021 This Test Report Form applies to: IEC 61029-1:1990 2021-09-28

IECEE TRF 61029-2-11C:2021 This Test Report Form applies to: IEC 61029-2-11:2001

2021-09-28

IECEE TRF 61029-2-3B:2021 This Test Report Form applies to: IEC 61029-2-3:1993, IEC 61029-2-3:1993/AMD1:2001 in con-junction with IEC 61029-1:1990

2021-09-17

IECEE TRF 61029-2-5D:2021 This Test Report Form applies to: IEC 61029-2-5:1993, IEC 61029-2-5:1993/AMD1:2001 in con-junction with IEC 61029-1:1990

2021-09-28

IECEE TRF 61029-2-7C:2021 This Test Report Form applies to: IEC 61029-2-7:1993 used in conjunction with IEC 61029-1:1990

2021-09-28

IECEE TRF 61558-2-16H:2021 This Test Report Form applies to: IEC 61558-2-16:2021 in conjunction with IEC 61558-1:2017

2021-09-17

IECEE TRF 61558-2-4E:2021 This Test Report Form applies to: IEC 61558-2-4:2021 in conjunction with IEC 61558-1:2017

2021-09-30

9/2021

www.iss.rs 93

IECEE TRF 62841-2-6A:2021 This Test Report Form applies to: IEC 62841-2-6:2020 for use in conjunction with IEC 62841-1:2014

2021-09-20

IECEE TRF 63044-5-1A:2021 This Test Report Form applies to: IEC 63044-5-1:2017

2021-09-20

2. ISO/CASCO – Committee on conformity assessment

ISO/IEC 17030:2021 Conformity assessment General requirements for third-party marks of conformity

2021-09-09

3. ISO/IEC JTC 1/SC 6 – Telecommunications and information exchange between systems

ISO/IEC/IEEE 8802-1AX:2021 Telecommunications and exchange between infor-mation technology systems Requirements for local and metropolitan area networks Part 1AX: Link aggregation

2021-09-13

ISO/IEC/IEEE 8802-1Q:2020/ AMD2:2021

Amendment 2 Telecommunications and exchange between information technology systems Requ-irements for local and metropolitan area networks

Part 1Q: Bridges and bridged networks YANG data model

2021-09-13

ISO/IEC/IEEE 8802-1Q:2020/ AMD3:2021

Amendment 3 Telecommunications and exchange between information technology systems Requ-irements for local and metropolitan area networks

Part 1Q: Bridges and bridged networks Virtual station interface (VSI) discovery and configuration protocol (VDP) extension to support network virtualization overlays over layer 3 (NVO3)

2021-09-13

4. ISO/IEC JTC 1/SC 7 – Software and systems engineering

ISO/IEC 24773-3:2021 Software and systems engineering Certification of software and systems engineering professionals

Part 3: Systems engineering

2021-09-02

5. ISO/IEC JTC 1/SC 17 – Cards and personal identification

ISO/IEC 18013-5:2021 Personal identification ISO-compliant driving licence Part 5: Mobile driving licence (mDL) application

2021-09-30

ISO/IEC 18745-2:2021 Test methods for machine readable travel docu-ments (MRTD) and associated devices Part 2: Test methods for the contactless interface

2021-09-16

9/2021

94 www.iss.rs

6. ISO/IEC JTC 1/SC 27 – IT security techniques

ISO/IEC 18014-2:2021 Information security Time-stamping services Part 2: Mechanisms producing independent tokens

2021-09-09

ISO/IEC 18033-1:2021 Information security Encryption algorithms Part 1: General

2021-09-10

ISO/IEC 27036-1:2021 Cybersecurity Supplier relationships Part 1: Overview and concepts

2021-09-09

ISO/IEC 27551:2021 Information security, cybersecurity and privacy protection Requirements for attribute-based unlinkable entity authentication

2021-09-07

7. ISO/IEC JTC 1/SC 29 – Coding of audio, picture, multimedia and hypermedia information

ISO/IEC 10918-7:2021 Information technology Digital compression and coding of continuous-tone still images Part 7: Reference software

2021-09-15

ISO/IEC 15444-16:2021 Information technology JPEG 2000 image coding system Part 16: Encapsulation of JPEG 2000 images into ISO/IEC 23008-12

2021-09-15

ISO/IEC 23001-10:2020/ AMD1:2021

Amendment 1 Information technology MPEG systems technologies Part 10: Carriage of timed metadata metrics of media in ISO base media file format Support for content-guided transcoding and spatial relationship of immersive media

2021-09-20

8. ISO/IEC JTC 1/SC 31 – Automatic identifi-cation and data capture techniques

ISO/IEC 22603-1:2021 Information technology Digital representation of product information Part 1: General requirements

2021-09-28

9. ISO/IEC JTC 1/SC 32 – Data management and interchange

ISO/IEC 19075-2:2021 Information technology Guidance for the use of database language SQL Part 2: Time-related information

2021-09-01

ISO/IEC 19075-3:2021 Information technology Guidance for the use of database language SQL Part 3: SQL embedded in

2021-09-01

ISO/IEC 19075-4:2021 Information technology Guidance for the use of database language SQL Part 4: Routines and

2021-09-01

9/2021

www.iss.rs 95

ISO/IEC 19075-5:2021 Information technology Guidance for the use of database language SQL Part 5: Row pattern recognition

2021-09-01

ISO/IEC 19075-6:2021 Information technology Guidance for the use of database language SQL Part 6: Support for JSON

2021-09-01

ISO/IEC 19075-7:2021 Information technology Guidance for the use of database language SQL Part 7: Polymorphic table functions

2021-09-01

ISO/IEC 19075-8:2021 Information technology Guidance for the use of database language SQL Part 8: Multidimensional arrays

2021-09-01

ISO/IEC 19763-16:2021 Information technology Metamodel framework for interoperability (MFI) Part 16: Metamodel for document model registration

2021-09-07

10. ISO/IEC JTC 1/SC 41 – Internet of Things and related technologies

ISO/IEC 21823-3:2021 Internet of Things (IoT) Interoperability for IoT systems Part 3: Semantic interoperability

2021-09-21

11. SyC SM – Smart Manufacturing

ISO/IEC TR 63306-2:2021 Smart manufacturing standards map (SM2) Part 2: Catalogue

2021-09-21

12. TA 20 – Analogue and digital audio

IEC 60958-1:2021 Digital audio interface Part 1: General 2021-09-01

IEC 60958-1:2021 RLV Digital audio interface Part 1: General 2021-09-01

IEC 60958-3:2021 Digital audio interface Part 3: Consumer applications

2021-09-02

IEC 60958-3:2021 RLV Digital audio interface Part 3: Consumer applications

2021-09-02

13. TC 1 – Terminology

IEC 60050-103:2009/ AMD4:2021

Amendment 4 International Electrotechnical Vocabulary (IEV) Part 103: Mathematics Functions

2021-09-03

IEC 60050-131:2002/ AMD5:2021

Amendment 5 International Electrotechnical Vocabulary (IEV) Part 131: Circuit theory

2021-09-03

IEC 60050-466:1990/ AMD3:2021

Amendment 3 International Electrotechnical Vocabulary (IEV) Part 466: Overhead lines

2021-09-03

IEC 60050-705:1995/ AMD7:2021

Amendment 7 International Electrotechnical Voca-bulary (IEV) Part 705: Radio wave propagation

2021-09-03

9/2021

96 www.iss.rs

IEC 60050-715:1996/ AMD3:2021

Amendment 3 International Electrotechnical Vocabulary (IEV) Part 715: Telecommunication networks, teletraffic and operation

2021-09-03

IEC 60050-721:1991/ AMD5:2021

Amendment 5 International Electrotechnical Vocabulary (IEV) Part 721: Telegraphy, facsimile and data communication

2021-09-03

IEC 60050-723:1997/ AMD7:2021

Amendment 7 International Electrotechnical Vocabulary (IEV) Part 723: Broadcasting: Sound, television, data

2021-09-03

IEC 60050-726:1982/ AMD7:2021

Amendment 7 International Electrotechnical Vocabulary (IEV) Part 726: Transmission lines and waveguides

2021-09-03

IEC 60050-801:1994/ AMD4:2021

Amendment 4 International Electrotechnical Vocabulary (IEV) Part 801: Acoustics and electroacoustics

2021-09-03

IEC 60050-811:2017/ AMD1:2021

Amendment 1: International Electrotechnical Vocabulary (IEV) Part 811: Electric traction

2021-09-03

14. TC 8/SC 8A – Grid Integration of Renewable Energy Generation

IEC TS 63102:2021 Grid code compliance assessment methods for grid connection of wind and PV power plants

2021-09-03

15. TC 22/SC 22F – Power electronics for electrical transmission and distribution systems

IEC 60700-1:2015/AMD1:2021 Amendment 1 Thyristor valves for high voltage direct current (HVDC) power transmission Part 1: Electrical testing

2021-09-15

IEC 60700-1:2015 + AMD1:2021 CSV

Thyristor valves for high voltage direct current (HVDC) power transmission Part 1: Electrical testing

2021-09-15

IEC TR 62001-4:2021 High-voltage direct current (HVDC) systems Gui-dance to the specification and design evaluation of AC filters Part 4: Equipment

2021-09-07

IEC TR 62001-4:2021 RLV High-voltage direct current (HVDC) systems Guidance to the specification and design evaluation of AC filters Part 4: Equipment

2021-09-07

16. TC 33 – Power capacitors and their applications

IEC 60143-2:2012/AMD1:2021 Amendment 1 Series capacitors for power systems Part 2: Protective equipment for series capacitor banks

2021-09-02

9/2021

www.iss.rs 97

IEC 60143-2:2012 + AMD1:2021 CSV

Series capacitors for power systems Part 2: Protective equipment for series capacitor banks

2021-09-02

17. TC 35 – Primary cells and batteries

IEC 60086-5:2021 Primary batteries Part 5: Safety of batteries with aqueous electrolyte

2021-09-30

IEC 60086-5:2021 RLV Primary batteries Part 5: Safety of batteries with aqueous electrolyte

2021-09-30

18. TC 38 – Instrument transformers

IEC 61869-11:2017/ISH1:2021 Interpretation sheet 1 Instrument transformers Part 11: Additional requirements for low-power passive voltage transformers

2021-09-15

19. TC 44 – Safety of machinery – Electro-technical aspects

IEC 60204:2021 SER Safety of machinery Electrical equipment of machines ALL PARTS

2021-09-15

IEC 60204-1:2016/ AMD1:2021

Amendment 1 Safety of machinery Electrical equipment of machines Part 1: General requ-irements

2021-09-15

IEC 60204-1:2016 + AMD1:2021 CSV

Safety of machinery Electrical equipment of machines Part 1: General requirements

2021-09-15

20. TC 47 – Semiconductor devices

IEC 63244-1:2021 Semiconductor devices Semiconductor devices for wireless power transfer and charging Part 1: General requirements and specifications

2021-09-14

21. TC 47/SC 47F – Micro-electromechanical systems

IEC 62047-40:2021 Semiconductor devices Micro-electromechanical devices Part 40: Test methods of micro-electro-mechanical inertial shock switch threshold

2021-09-03

22. TC 49 – Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection

IEC 60444-6:2021 Measurement of quartz crystal unit parameters Part 6: Measurement of drive level dependence (DLD)

2021-09-01

9/2021

98 www.iss.rs

IEC 60444-6:2021 RLV Measurement of quartz crystal unit parameters Part 6: Measurement of drive level dependence (DLD)

2021-09-01

IEC 63041-1:2021 Piezoelectric sensors Part 1: Generic specifications 2021-09-17

IEC 63041-1:2021 RLV Piezoelectric sensors Part 1: Generic specifications 2021-09-17

23. TC 61 – Safety of household and similar

electrical appliances

IEC 60335-2-74:2021 Household and similar electrical appliances Safety Part 2-74: Particular requirements for portable immersion heaters

2021-09-03

IEC 60335-2-74:2021 RLV Household and similar electrical appliances Safety Part 2-74: Particular requirements for portable immersion heaters

2021-09-03

24. TC 62/SC 62A – Common aspects of

electrical equipment used in medical

practice

IEC 80001-1:2021 Application of risk management for IT-networks incorporating medical devices Part 1: Safety, effectiveness and security in the implementation and use of connected medical devices or connected health software

2021-09-21

25. TC 62/SC 62D – Electromedical equipment

IEC 60601-2-41:2021 Medical electrical equipment Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis

2021-09-03

26. TC 69 – Electric road vehicles and electric

industrial trucks

IEC PAS 62840-3:2021 Electric vehicle battery swap system Part 3: Particular safety and interoperability requirements for battery swap systems operating with removable RESS/battery systems

2021-09-27

27. TC 70 – Degrees of protection provided

by enclosures

IEC 62262:2002/AMD1:2021 Amendment 1 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

2021-09-03

9/2021

www.iss.rs 99

IEC 62262:2002 + AMD1:2021 CSV

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

2021-09-03

28. TC 82 – Solar photovoltaic energy

systems

IEC TS 63163:2021 Terrestrial photovoltaic (PV) modules for consumer products Design qualification and type approval

2021-09-14

29. TC 85 – Measuring equipment for electrical

and electromagnetic quantities

IEC 60688:2021 Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals

2021-09-16

IEC 60688:2021 RLV Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals

2021-09-16

IEC 62586-2:2017/AMD1:2021 Amendment 1 Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements

2021-09-15

IEC 62586-2:2017 + AMD1:2021 CSV

Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements

2021-09-15

30. TC 86/SC 86A – Fibres and cables

IEC TR 62000:2021 Guidelines for combining different single-mode fibre sub-categories

2021-09-03

IEC TR 62000:2021 RLV Guidelines for combining different single-mode fibre sub-categories

2021-09-03

31. TC 86/SC 86B – Fibre optic interconnecting

devices and passive components

IEC 61753-101-03:2021 Fibre optic interconnecting devices and passive components performance standard Part 101-03: Fibre management systems for category OP Outdoor protected environment

2021-09-27

IEC 61753-111-07:2021 Fibre optic interconnecting devices and passive components Performance standard Part 111-07: Sealed closures Category A Aerial

2021-09-03

IEC 61753-111-09:2021 Fibre optic interconnecting devices and passive components Performance standard Part 111-09: Sealed closures Category S Subterranean

2021-09-14

9/2021

100 www.iss.rs

32. TC 91 – Electronics assembly technology

IEC 61189-2-807:2021 Test methods for electrical materials, printed boards and other interconnection structures and assemblies

Part 2-807: Test methods for materials for interconnection structures Decomposition temperature (Td) using TGA

2021-09-03

33. TC 100 – Audio, video and multimedia systems and equipment

IEC 60958:2021 SER Digital audio interface ALL PARTS 2021-09-02

34. TC 104 – Environmental conditions, classification and methods of test

IEC 60068-3-3:2019/ COR1:2021

Corrigendum 1 Environmental testing Part 3-3: Supporting documentation and guidance Seismic test methods for equipment

2021-09-29

35. TC 110 – Electronic display devices

IEC 62629-1-2:2021 3D display devices Part 1-2: Generic Termino-logy and letter symbols

2021-09-17

IEC 62629-1-2:2021 RLV 3D display devices Part 1-2: Generic Termino-logy and letter symbols

2021-09-17

36. TC 111 – Environmental standardization for electrical and electronic products and systems

IEC 62321-3-3:2021 Determination of certain substances in electro-technical products Part 3-3: Screening Poly-brominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromato-graphy-mass spectrometry using a pyrolyser/thermal desorption accessory (Py/TD-GC-MS)

2021-09-14

37. TC 119 – Printed Electronics

IEC TR 62899-402-4:2021 Printed electronics Part 402-4: Printability Measurement of qualities Classification and measurement methods for morphology

2021-09-21

38. TC 120 – Electrical Energy Storage (EES) Systems

IEC TR 62933-2-200:2021 Electrical energy storage (EES) systems Part 2-200: Unit parameters and testing methods Case study of electrical energy storage (EES) systems located in EV charging station with PV

2021-09-03

85+ГОДИНА СА ВАМА!

ISSN 0353–8524

ИНСТИТУТ ЗА СТАНДАРДИЗАЦИЈУ СРБИЈЕ

Београд, Стевана Бракуса 2, поштански фах бр. 2105

Телефон: (011) 75-41-256

Телефакс: (011) 75-41-257

www.iss.rs

ИНФОРМАЦИОНИ ЦЕНТАР

Телефон: (011) 34-09-310

[email protected].

ПРОДАЈА

Телефон: (011) 34-09-385

[email protected]

http://www.iss.rs/

mailto:[email protected].

mailto:/[email protected]

09/2021 - iss.rs

Documents