1 © 2014 ssi schäfer united states reusable packaging right-sized: how to evaluate the right...
TRANSCRIPT
1© 2014 SSI Schäfer
United States
Reusable Packaging Right-Sized: How to Evaluate the Right Reusable Container for your Product’s Protection, Internal Handling and Logistics
By:
David R. McCullochVP and Managing Director, Packaging Systems DivisionPlastics GroupSchaefer Systems International, Inc.
2© 2014 SSI Schäfer
United States
How do we select a Reusable Container System?
What are we shipping?How will we protect it?How are we shipping it?How will it be handled?Where is it being shipped?How many, how often?Etc., etc., etc……The choices are endless, but ONE THING
drives the choice “Logistically”
3© 2014 SSI Schäfer
United States
Packaging is not driven by the Product but by LOGISTICS!!
l In school I was taught that packaging is driven by the need to protect the Product being Distributed.
– Using the Primary / Secondary / Tertiary Principles Primary = DUNNAGE Secondary = Container Tertiary = Pallet / Skid / Palletized Load
• The Primary Tool for Calculating all of this is a Cube Analysis Process, one popular is CAPE™.
l So you say, what is the problem?
– CUBE in the DISTRIBUTION CHAIN, which was highlighted quickly when Gasoline and Diesel Fuel went over $ 4.00 USD / Gallon.
You pay for Correct Reusable Packaging only ONCE, you pay for freight forever!
4© 2014 SSI Schäfer
United States
Packaging is driven by LOGISTICS, not the Product!!
l What is taught in school is in reverse order for Distribution and Logistics!! Many Consider Packaging & Method of Distribution last!
– Using the Primary / Secondary / Tertiary Principles, we add a CRITICAL Fourth level or unit, and call it Quaternary.
Primary = DUNNAGE Secondary = Container Tertiary = Pallet / Skid / Palletized Load Quaternary = Truck / Train / Ship
• We still are working in Reverse, for Logistics:
l Note: Automated Storage Systems: Packaging 1st = Money $$$$ Saved in your System Installation
5© 2014 SSI Schäfer
United States
How am I shipping my product?
6© 2014 SSI Schäfer
United States
How do I determine what I need with So Many Choices?
7© 2014 SSI Schäfer
United States
AIAG Straight Wall Container Choices
Collapsible / Stackable Stack Only
8© 2014 SSI Schäfer
United StatesUnited States
Product Protection - Considerations Dunnage for Part
Protection / Separation
ESD for Electro Static Sensitive Parts
9© 2014 SSI Schäfer
United StatesUnited States
Custom Steel Racks and Dunnage Designed for Part
Work-In-Process / Washing SolidWorks 3D / Glass Rack
10© 2014 SSI Schäfer
United States
Economic Benefits / Cost Evaluation (RPA)Reusable packaging can reduce costs throughout the supply chain. Example, Reusable Packaging Systems:
Reduce over all packaging costsDeliver rapid ROIReduce costly product damageReduce labor costsReduce inventory, therefore requiring less space
For the purpose of this presentation we will assume that using Reusable Packaging has been cost evaluated and determined to be feasible, using the Cost Evaluation tools on RPA www.reusables.org or www.usereusables.com/cost
11© 2014 SSI Schäfer
United States
Packaging is driven by LOGISTICS, not the Product!!
l What is taught in school is in reverse order for Distribution and Logistics!! The Correct Decision Order is:
– Using the Primary / Secondary / Tertiary / Quaternary Principles, considering Method of Distribution First!!
Primary = Truck / Train / Ship Secondary = Pallet / Skid / Palletized Load Tertiary = Container Quaternary = Dunnage (if Needed)
l We are no longer working in Reverse from Logistics!!!
– Savings will be had everyday your products are distributed with a Package Developed from the Method of Shipment backwards! This is the only way to Maximize Cube Utilization and Minimize Freight.
12© 2014 SSI Schäfer
United States
Shipping via Sea Container?
• Common Pallet Sizes:• 1200 x 1000 mm, 1190 x 1140 mm and 1200 x 800 mm
• Common Containers sizes vary – standards being evaluated• All are metric (mm) based on one of the Pallet sizes above
13© 2014 SSI Schäfer
United States
Shipping via Tractor-Trailer?• Most common today is 53’ High Cube (110”)
• Common Pallet Sizes:• 48 x 45 Inch, 48 x 40 Inch and 32 x 30 Inch.
• Common Containers sizes vary – Standards vary by Industry• Most are by Inches based on one of the Pallet sizes above
14© 2014 SSI Schäfer
United States
For our Example, we will use the following Criteria:
We are shipping product from our Manufacturing Plant to our Customer Personalization / Distribution Center.
Product will ship via full 53’ Truck loads using 48 x 45 Pallet and Tops, and hand held Containers. Mixed with other products using compatible palletized products.
So how do we select the best container?
15© 2014 SSI Schäfer
United States
Tape Measure with the Printed Carton / Dunnage / Quaternary Unit
16© 2014 SSI Schäfer
United States
Container Cube Calc ©Part Name:Part Number: OD: 48.0 36.0 32.0 24.0 22.4 15.0 12.0 7.5 4S 4C 5S 7S 7P/C 8S 9S 11S 11P/C 14S 14C
ID: (In) 45.3 33.3 29.3 21.3 20.4 12.9 9.4 5.3 3.3 2.8 4.3 6.8 6.3 8.0 8.8 10.3 9.8 13.8 13.3Unit Eng. (in.) Met. (mm) ID: (mm) 1151 846 744 541 518 328 238 135 83 71 109 173 160 203 223 261 248 351 338
Length 3.18 81 14.27 10.49 9.23 6.71 6.42 4.07 2.95 1.67 1.03 0.88 1.35 2.15 1.98 2.52 2.77 3.24 3.08 4.35 4.19Width 1.64 42 27.67 20.34 17.89 13.01 12.45 7.89 5.72 3.25 2.00 1.71 2.62 4.16 3.85 4.88 5.36 6.28 5.96 8.44 8.13Height 3.04 77 14.91 10.96 9.64 7.01 6.71 4.25 3.08 1.75 1.07 0.92 1.41 2.24 2.07 2.63 2.89 3.38 3.21 4.55 4.38Depth 0 0
Part Lb. Kg.Weight 0.5 0.23 Len. Wid. Hgt. Len. Wid. Hgt. Len. Wid. Hgt. Len. Wid. Hgt. Len. Wid. Hgt. Len. Wid. Hgt.
1 12 15 4 12 15 5
2 3 4 2 3 4 2
3 77 81 41 77 81 41
4
5
6
7
8
9
10
11
12
13
14
108
2592
1486
Room for Parts at Top
Less Parts / Pallet
3456
1951
Max Cube
Tight fit in Height
24
0.5
1.3
13.3
12
9
Estimated Gross Weight / Pallet Load
Advantages
Disadvantages
24
0.5
1.2
13.2
12
12
144
Container Tare Weight (Lbs.)
Gross Container Weigth
Number of Containers per one Layer
Number of Layers / Pallet Load
Total # of Containers / Pallet Load
Estimated Parts / Pallet Load
Option 6
Tote Size (Inches) L x W x H
# of Parts per L x W x H
Part Orientation L x W x H
Number of Parts / Container
Part Weight (Lbs.)
Dimensions
Container Sizes: Length & Width - NF Totes Tape Measure16IMBLKYEL
Container Sizes: Height - NF Totes
Option 1 Option 2 Option 3 Option 4 Option 5
17© 2014 SSI Schäfer
United States
Container Options: 12 x 15 x4.0” vs. 12 x 15 x 5.0”
18© 2014 SSI Schäfer
United States
NF121504RS Solution:
Parts are very close to the top and may rub on bottom of container above it during transit. Result
19© 2014 SSI Schäfer
United States NF121505AS Solution:
Parts have space at the top to prevent rub on bottom of container above it during transit. Result
20© 2014 SSI Schäfer
United StatesNF121505AS Solution / w Optional Lid:
Parts have space at the top allowing for optional lid for added protection from debris. Result
21© 2014 SSI Schäfer
United States
In conclusion considering the Method of Distribution First!!
l Our Solution used:
– Using the Primary / Secondary / Tertiary / Quaternary Principles, considering Method of Distribution First!!
Primary = 53’ Truck Secondary = 48 x 45 Pallet / Top Cap / Palletized Load Tertiary = 12 x 15 x 5” Stack Only Container Quaternary = Dunnage is the Printed Carton shipped to the Customer.
l We are now working in Maximized Cube for Logistics!!!
22© 2014 SSI Schäfer
United States
Thank you for your interest in
SSI SCHAEFER SYSTEMS INTERNATIONAL
Packaging Systems Division
packaging.ssi-schaefer.us