1 analysis of ngmn requirements req 7: enodeb plug & play self commissioning
TRANSCRIPT
1
Analysis of NGMN Requirements
REQ 7: eNodeB Plug & Play Self Commissioning
Slide title :32-35pt Color: R153 G0 B0
Corporate Font :FrutigerNext LT Medium
Font to be used by customers and
partners : Arial
Slide text :20-22ptBullets level 2-5:
18pt Color:Black
Corporate Font :FrutigerNext LT Medium
Font to be used by customers and
partners : Arial
2
Specifications
Related 3GPP SA5 specifications• Self-Configuration of Network Element Integration Reference
Point (IRP) TS 32.50x (x=1,2,3,5,7)
Current Status of the specifications• TS 32.50x was introduced in Rel-8, and updated in Rel-9
Slide title :32-35pt Color: R153 G0 B0
Corporate Font :FrutigerNext LT Medium
Font to be used by customers and
partners : Arial
Slide text :20-22ptBullets level 2-5:
18pt Color:Black
Corporate Font :FrutigerNext LT Medium
Font to be used by customers and
partners : Arial
3
eNodeB Plug & Play Self Commissioning
Requirements Existing 3GPP Standards Status
In order to take full advantage of the eNodeB Plug & Play functionality the deployment and installation process must not contain more than the following steps
eNodeB Hardware installed on site eNodeB powered on eNodeB connected to Network Operators IP Network
Result: “eNodeB is properly on air” and can be taken into commercial service by the operator
TS 32.50x supports this.