1 chapter 14 glass evidence saferstein shattering glass in slo mo bullet slo mo
TRANSCRIPT
1
Chapter 14 Glass Evidence
Saferstein
Shattering glass in slo mo
Bullet slo mo
Forensic Science: Fundamentals & Investigations, Chapter 14 2
Introduction and History of Glass Introduction and History of Glass
Analysis of glass found at a crime scene can yield trace evidence.
The earliest human-made glass objects (beads) date back to about 2500 B.C. Egypt.
Specialized glass production was an art, a science, and a state secret in the republic of Venice over a span of hundreds of years.
By the fourteenth century, the knowledge of glass production spread throughout Europe.
The industrial revolution brought the mass production of many kinds of glass.
Forensic Science: Fundamentals & Investigations, Chapter 14 3
What Is Glass? What Is Glass?
Once it cools, glass can be polished, ground, or cut for useful or decorative purposes. Glass blowers can form glass into many different shapes.
Crystalline solids have a regular atomic structure (illus-trated above, left). But glass is an amorphous solid and so has an irregular atomic structure (illustrated above, right),
Because of this, glass breaks in a variety of fracture patterns.
Forensic Science: Fundamentals & Investigations, Chapter 14 4
Types of Glass Types of Glass
Glass is an amorphous solid usually made from silica (SiO2), calcium oxide, and sodium oxide.
Because glass is made of a variety of compounds, there are many types of glass.
Adding different metal oxides to glass mixtures, for example, yields different colors.
And because different types of glass have different densities and refraction indexes, it is possible to compare one type of glass with another.
Forensic Science: Fundamentals & Investigations, Chapter 14 5
Fracture Patterns in Broken Glass
Glass can stretch slightly when hit. And because it’s an amorphous solid, it will not
break into regular pieces with straight line fractures.
That means fracture patterns can provide clues about the direction, rate, and sequence of the impacts.
Forensic Science: Fundamentals & Investigations, Chapter 14 6
Forensic Science: Fundamentals & Investigations, Chapter 14 7
Why Radial and Concentric Fractures Form
Impacted glass is compressed on the side it is hit. It will stretch on the opposite side of the glass, and the
tension there will radiate breaks in the glass outward from the point of impact.
Then fractures form in the shape of concentric circles on the same side of the impact.
Forensic Science: Fundamentals & Investigations, Chapter 14 8
Radial Fracture
Primary Fracture Crack that extends out
like spoke of wheel from the point at which glass was struck
Show up on surface opposite of where pressure was
Forensic Science: Fundamentals & Investigations, Chapter 14 9
Concentric Fracture
Secondary Fracture Crack that forms rough
circles around point of impact
Crack is on entrance side of glass
Forensic Science: Fundamentals & Investigations, Chapter 14 10
Bullet Fractures
As a bullet passes through glass, it pushes a cone shaped piece of glass out of the glass ahead of it. Forming a saucer shaped depression on exit side.
This makes the exit side of the hole larger than the entrance side of the hole.
Forensic Science: Fundamentals & Investigations, Chapter 14 11
Forensic Science: Fundamentals & Investigations, Chapter 14 12
Path of a Bullet Passing through Window Glass
The entry hole will be round if the bullet was fired perpendicular to the pane.
If fired from an angle, glass pieces will be forced out to the opposite side from the shot.
The angles at which bullets enter window glass can help locate the position of the shooter.
Bits of the glass can fly backward (backscatter), possibly creating trace evidence.
Forensic Science: Fundamentals & Investigations, Chapter 14 13
Radial Cracks
Edges of broken glass contain ridge lines (curved)
3 R rule – radial cracks (factures) form at right angles on the reverse side of the force
Forensic Science: Fundamentals & Investigations, Chapter 14 14
Forensic Science: Fundamentals & Investigations, Chapter 14 15
Sequence of Impacts
When a fracture traveling across glass meets another fracture that is already present, the new fracture will be stopped
Forensic Science: Fundamentals & Investigations, Chapter 14 16
Forensic Science: Fundamentals & Investigations, Chapter 14 17
Forensic Science: Fundamentals & Investigations, Chapter 14 18
Comparison of Glass Fragments
1. Match fractured pieces (puzzles) – don’t touch actual pieces (causes flaking) (Indvl)
2. Match wavy lines that appear when you shine light through it. (Indvl)
3. Density (class)
4. Index of Refraction (class)
Forensic Science: Fundamentals & Investigations, Chapter 14 19
Example- match wavy lines
Forensic Science: Fundamentals & Investigations, Chapter 14 20
Density
The formula for calculating density is: D = m / V
The mass (m) of a fragment of glass can be found using a balance.
Displacement Method -Place the fragment of glass into a graduated cylinder filled with water and measure the volume (V) of overflow.
Floatation Method – float solid in a liquid of the same density.
Archimedes Principle
Density Lab
Obtain a balance, piece of fine string, and a small beaker find the mass of a piece of glass to the nearest .01 g Tie the string around the piece of glass Fill the beaker nearly full of water. Zero out the balance Place the piece of glass in the beaker, adjusting the height so that it is not
touching the sides or bottom of the beaker. Record the new mass (use units of ml) This is the volume of the glass (because the density of water is 1 g/mL). Repeat this process for all the known samples of glass and the unknown. Calculate the density of each piece of glass. Identify your unknown.
Forensic Science: Fundamentals & Investigations, Chapter 14 21
Forensic Science: Fundamentals & Investigations, Chapter 14 22
Video (glass) Video (beaker)
Forensic Science: Fundamentals & Investigations, Chapter 14 23
Refractive Index
When a beam of light moves from one medium into another, its speed changes. That change causes the beam to change direction, bend.
In the illustration above, the green line to the right of the red line shows the direction if the beam had not changed direction. But the black line shows it bent toward the red line.
Forensic Science: Fundamentals & Investigations, Chapter 14 24
Refractive Index
Refraction is the change in the direction of light as it changes speed when moving from one medium into another.
The direction of the light forms two angles with the normal .
If the light passes into a denser medium (the gray area), its direction will bend toward the normal.
Forensic Science: Fundamentals & Investigations, Chapter 14 25
Application of Refractive Index Application of Refractive Index to Forensicsto Forensics
Water Index = 1.333, (travels 1.333 times faster in vacuum than in water)
Light passed through two fragments of glass—one found at the crime scene and the other connected to a suspect—may have the same refraction and, so, link one with the other.
Becke Line- bright halo observed near the border of a particle that is immersed in a liquid that has a different Index of Refrac.
Forensic Science: Fundamentals & Investigations, Chapter 14 26
Application of Refractive Index Application of Refractive Index to Forensicsto Forensics
If the glass fragments found at the crime scene, or connected with the suspect, or both are too small to check for this consistency by passing light through them, other methods such as the submersion method can be used to provide estimates.
Use the illustration above to describe the submersion method for obtaining refraction estimates.
Forensic Science: Fundamentals & Investigations, Chapter 14 27
Handling of Crime Scene Glass Samples
1. Identify and photograph any glass samples before moving them.
2. Collect the largest fragments that can be reasonably collected.
3. Identify the outside and inside surface of any glass. 4. If multiple panes are involved, make a diagram. 5. Note trace evidence such as skin, hair, blood, or
fibers. 6. Package all materials collected to maintain the chain
of custody.
Forensic Science: Fundamentals & Investigations, Chapter 14 28
. . . . . . . . . . . . . . . . . Summary. . . . . . . . . . . . . . . . . Summary
Different kinds of glass can be analyzed for their density, refractiveness, and fracture patterns.
The different compounds that make up a kind of glass affect its density.
The refractiveness of glass can be measured in a number of ways.
Fracture patterns can provide information about such things as the direction, the rate, and the sequence of the impacts.