1. ciw 7 1 16 x 5m single ram bop
TRANSCRIPT
7 – 1/16” Blow out Preventors
1. 7 – 1/16” Cameron 5,000 psi Type U Single Ram BOP2. 7 – 1/16” Cameron 10,000 psi Type U Single Ram BOP3. 7 – 1/16” Cameron 10,000 psi Type U Double Ram BOP4. 7 – 1/16” Cameron 15,000 psi Type U Single Ram BOP5. 7 – 1/16” Cameron 15,000 psi Type U Double Ram BOP6. 7 – 1/16” Cameron 5,000 psi Type U Annular Ram BOP7. 7 – 1/16” Cameron 10,000 psi Type U Annular Ram BOP8. 7 – 1/16” Torus 3,000 psi Type Spherical Annular Ram BOP
11” Blow out Preventors
9. 11” Cameron 10,000 psi Type U Single Ram BOP10. 11” Cameron 10,000 psi Type U Single Ram BOP (LB Bonnets)11. 11” Cameron 10,000 psi Type U Single Ram BOP (Standard Bonnets)12. 11” Cameron 10,000 psi Type U Double Ram BOP13. 11” Cameron 15,000 psi Type U Single Ram BOP14. 11” Cameron 15,000 psi Type U Double Ram BOP
13 – 5/8” Blow out Preventors
15. 13 – 5/8” Cameron 5,000 psi Type U Single Ram BOP16. 13 – 5/8” Cameron 5,000 psi Type U Double Ram BOP17. 13 – 5/8” Cameron 10,000 psi Type U Single Ram BOP18. 13 – 5/8” Cameron 10,000 psi Type U Double Ram BOP19. 13 – 5/8” Sha�er 15,000 psi Type U Double Ram BOP (Cavity x2 ULtralock)20. 13 – 5/8” Sha�er 15,000 psi Type U Double Ram BOP21. 13 – 5/8” Hydrill 5,000 psi Annular BOP22. 13 – 5/8” Sha�er 5,000 psi Annular BOP23. 13 – 5/8” Sha�er 10,000 psi Annular BOP
20 ¾” Blow out Preventors
24. 20 ¾” Sha�er 3,000 Type LWS Single Ram BOP(Multilock)25. 20 ¾” Sha�er 3,000 Type LWS Single Ram BOP
21 ¼” Blow out Preventors
26. 21 ¼” Hydrill 2,000 Type MSP Annular BOP
Koomey Units
27. Koomey Control Unit
Page
12345678
91011121314
151617181920212223
2425
26
27
BOP MAIN MENU
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW 7 1/16” x 5M Single Ram BOP
CIW Type U Single RAM Blow Out Preventor
7-‐1/16” 5,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 7 1/16” x 5M (RX46) FLANGED
Cavity Standard Bonnets
Bottom Connection and Ring Groove
API 7 1/16” x 5M (RX46) FLANGED
Side Outlets’ (2 each)
API 2 1/16” x 5M (RX24) FLANGED
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
1.3 Gallons -‐ Closed
1.3 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
74 “ Approximate Height of Unit
27.50”
Approximate Width of Unit
25” Approximate Weight of Unit
2800Ibs
Stud Bolt Size Stud Bolts (Per Flange)
12 Pressure Rating
5,000 psi
Nuts for Stud Bolts Bore 7 1/16”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 1
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW 7 1/16” x 10M Single Ram BOP
CIW Type U Single RAM Blow Out Preventor
7-‐1/16” 10,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 7 1/16” x 10M (BX156) FLANGED
Cavity Standard Bonnets
c/w Tandem Boosters
Bottom Connection and Ring Groove
API 7 1/16” x 10M (BX156) FLANGED
Side Outlets’ (2 each)
API 2 1/16” x 10M (BX152)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
1.3 Gallons -‐ Closed
1.3 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
74 “ Approximate Height of Unit
30.56”
Approximate Width of Unit
25” Approximate Weight of Unit
3550Ibs
Stud Bolt Size Stud Bolts (Per Flange)
12 Pressure Rating
10,000 psi
Nuts for Stud Bolts Bore 7 1/16”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 2
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW 7 1/16” x 10M Double Ram BOP
CIW Type U Double RAM Blow Out Preventor
7-‐1/16” 10,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 7 1/16” x 10M (BX156) FLANGED
Top Cavity Standard Bonnets
Bottom Cavity Standard Bonnets
Bottom Connection and Ring Groove
API 7 1/16” x 10M (BX156) FLANGED
Side Outlets’ (4 each)
API 2 1/16” x 10M (BX152)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
1.3 Gallons -‐ Closed
1.3 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
74 “ Approximate Height of Unit
48.63”
Approximate Width of Unit
25” Approximate Weight of Unit
6400Ibs
Stud Bolt Size Stud Bolts (Per Flange)
12 Pressure Rating
10,000 psi
Nuts for Stud Bolts Bore 7 1/16”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 3
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW 7 1/16” x 15M Single Ram BOP
CIW Type U Single RAM Blow Out Preventor
7-‐1/16” 15,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 7 1/16” x 10M (BX156) FLANGED
Cavity Shear Bonnets
c/w Boosters
Bottom Connection and Ring Groove
API 7 1/16” x 15M (BX156) FLANGED
Side Outlets’ (2 each)
API 2 1/16” x 15M (BX152)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
1.3 Gallons -‐ Closed
1.3 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
74 “ Approximate Height of Unit
31.81”
Approximate Width of Unit
25” Approximate Weight of Unit
3800Ibs
Stud Bolt Size Stud Bolts (Per Flange)
16 Pressure Rating
15,000 psi
Nuts for Stud Bolts Bore 7 1/16”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 4
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW 7 1/16” x 15M Double Ram BOP
CIW Type U Double RAM Blow Out Preventor
7-‐1/16” 15,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 7 1/16” x 10M (BX156) FLANGED
Top Cavity Standard Bonnets
Bottom Cavity Standard Bonnets
Bottom Connection and Ring Groove
API 7 1/16” x 15M (BX156) FLANGED
Side Outlets’ (4 each)
API 2 1/16” x 15M (BX152)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
1.3 Gallons -‐ Closed
1.3 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
74 “ Approximate Height of Unit
48.88”
Approximate Width of Unit
25” Approximate Weight of Unit
6750Ibs
Stud Bolt Size Stud Bolts (Per Flange)
16 Pressure Rating
15,000 psi
Nuts for Stud Bolts Bore 7 1/16”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 5
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Hydrill Type GK 7 1/16” x 5M Annular BOP
Hydrill Type GK Annular Blow Out Preventor
7 1/16“ x 5,000 psi
Original Equipment Manufacturer
Hydrill Model Type GK
BOP Unit Details
Top Connection and Ring Groove
API 7 1/16” x 5M (R46) STUDDED
Trim H2S (Nace MR-‐01-‐75)
Bottom Connection and Ring Groove
API 7 1/16” x 5M (R46) FLANGED
Pressure Rating
5,000 psi
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
3.3 Gallons -‐ Closed
Bore 7 1/16”
3.86 Gallons – Open
Image Not To Scale For Representation Only
Approximate Height of Unit
36 7/8” Clearance Dia
35 ¾“
Stud Bolt Size Body Dia 29 ¼“ Approximate Weight of Unit
3785 Ibs
Nuts for Stud Bolts Stud Bolts (Per Flange)
12
Certification
OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 6
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Shaffer Bolt Cover 7 1/16” x 10M Annular BOP
Shaffer Bolt Cover Blow Out Preventor
7 1/16“ x 10,000 psi
Original Equipment Manufacturer
Shaffer Model Bolt Cover
BOP Unit Details
Top Connection and Ring Groove
API 7 1/16” x 10M (BX156) STUDDED
Trim H2S (Nace MR-‐01-‐75)
Bottom Connection and Ring Groove
API 7 1/16” x 10M (BX156) FLANGED
Pressure Rating
10,000 psi
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
9.42 Gallons -‐ Closed
Bore 7 1/16”
7.08 Gallons – Open
Image Not To Scale For Representation Only
Approximate Height of Unit
41 ¼” Clearance Dia
49 ½“
Stud Bolt Size Body Dia 43 ¾“ Approximate Weight of Unit
12200 Ibs
Nuts for Stud Bolts Stud Bolts (Per Flange)
12
Certification
OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 7
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Torus Type Spherical 7 1/16” x 3M Annular BOP
Torus Type Spherical Annular Blow Out
Preventor
7 1/16“ x 3,000 psi
Original Equipment Manufacturer
Torus Model Spherical
BOP Unit Details
Top Connection and Ring Groove
API 7 1/16” x 3M (R45) STUDDED
Trim H2S (Nace MR-‐01-‐75)
Bottom Connection and Ring Groove
API 7 1/16” x 3M (R45) FLANGED
Pressure Rating
3,000 psi
Standard Ring Grooves
Operating Volume
Gallons -‐ Closed
Bore 7 1/16”
Gallons – Open
Image Not To Scale For Representation Only
Approximate Height of Unit
21 3/8” Clearance Dia
28 ½“
Certification Body Dia 28 ½“ Approximate Weight of Unit
2200 Ibs
OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 8
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 11” x 10M Single Ram BOP
CIW Type U Single RAM Blow Out Preventor
11” x 10,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 11” x 10M (BX158) FLANGED
Cavity Standard Bonnets
c/w Tandem Boosters
Bottom Connection and Ring Groove
API 11 1/16” x 10M (BX158) FLANGED
Side Outlets’ (2 each)
API 3 1/16” x 10M (BX154)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
3.5 Gallons -‐ Closed
3.4 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
92.250“ Approximate Height of Unit
35.69”
Approximate Width of Unit
25.75” Approximate Weight of Unit
6400Ibs
Stud Bolt Size Stud Bolts (Per Flange)
16 Pressure Rating
10,000 psi
Nuts for Stud Bolts Bore 11”
Trim H2S (Nace MR-‐01-‐75)
Certification DNV
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 9
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 11” x 10M Single Ram BOP
CIW Type U Single RAM Blow Out Preventor
11” x 10,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 11” x 10M (BX158) FLANGED
Cavity L/B Bonnets
Bottom Connection and Ring Groove
API 11 1/16” x 10M (BX158) FLANGED
Side Outlets’ (2 each)
API 3 1/16” x 10M (BX155)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
7.9 Gallons -‐ Closed
6.8 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
92.25“ Approximate Height of Unit
35.68”
Approximate Width of Unit
36.75” Approximate Weight of Unit
11300 Ibs
Stud Bolt Size Stud Bolts (Per Flange)
16 Pressure Rating
10,000 psi
Nuts for Stud Bolts Bore 11”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 10
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 11” x 10M Single Ram BOP
CIW Type U Single RAM Blow Out Preventor
11” x 10,000 psi
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 11” x 10M (BX158) FLANGED
Cavity Standard Bonnets
Bottom Connection and Ring Groove
API 11 1/16” x 10M (BX158) FLANGED
Side Outlets’ (2 each)
API 3 1/16” x 10M (BX154)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
3.5 Gallons – Closed
3.4 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
96.25“ Approximate Height of Unit
27”
Approximate Width of Unit
36.75” Approximate Weight of Unit
11300 Ibs
Stud Bolt Size Stud Bolts (Per Flange)
16 Pressure Rating
10,000 psi
Nuts for Stud Bolts Bore 11”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyed
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 11
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 11” x 10M Double Ram BOP
CIW Type U Double RAM
Blow Out Preventor
11” x 10,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 11” x 10M (BX158) FLANGED
Cavity Standard Bonnets
Bottom Connection and Ring Groove
API 11” x 10M (BX158) FLANGED
Side Outlets’ (4 each)
API 4 1/16” x 10M (BX154)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
3.5 Gallons -‐ Closed
3.4 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
108.250“ Approximate Height of Unit
55.875”
Approximate Width of Unit
35.750” Approximate Weight of Unit
11,300Ibs
Stud Bolt Size Stud Bolts (Per Flange)
16 Pressure Rating
10,000 psi
Nuts for Stud Bolts Bore 11”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 12
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 11” x 15M Single Ram BOP
CIW Type U Single RAM Blow Out Preventor
11” x 15,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 11” x 15M (BX158) FLANGED
Cavity Standard Bonnets
c/w Tandem Boosters
Bottom Connection and Ring Groove
API 11 1/16” x 15M (BX158) FLANGED
Side Outlets’ (2 each)
API 3 1/16” x 15M (BX154)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
5.8 Gallons -‐ Closed
5.7 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
124 “ Approximate Height of Unit
44.81”
Approximate Width of Unit
32” Approximate Weight of Unit
10300Ibs
Stud Bolt Size Stud Bolts (Per Flange)
20 Pressure Rating
15,000 psi
Nuts for Stud Bolts Bore 11”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 13
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 11” x 15M Double Ram BOP
CIW Type U Double RAM Blow Out Preventor
11” x 15,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 11” x 15M (BX158) FLANGED
Cavity Standard Bonnets
Bottom Connection and Ring Groove
API 11” x 15M (BX158) FLANGED
Side Outlets’ (4 each)
API 3 1/16” x 15M (BX154)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
5.8 Gallons -‐ Closed
5.7 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
124 “ Approximate Height of Unit
69.75”
Approximate Width of Unit
32” Approximate Weight of Unit
18400Ibs
Stud Bolt Size Stud Bolts (Per Flange)
20 Pressure Rating
15,000 psi
Nuts for Stud Bolts Bore 11”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 14
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 13 5/8” x 5M Single Ram BOP
CIW Type U Single RAM Blow Out Preventor
13 5/8” x 5,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 13 5/8” x 5M (BX160) FLANGED
Cavity Standard Bonnets
c/w Tandem Boosters
Bottom Connection and Ring Groove
API 13 5/8” x 5M (BX160) FLANGED
Side Outlets’ (4 each)
API 3 1/8” x 5M (RX35) FLANGED
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
5.8 Gallons -‐ Closed
5.5 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
113“ Approximate Height of Unit
33.81”
Approximate Width of Unit
29.25” Approximate Weight of Unit
7700Ibs
Stud Bolt Size Stud Bolts (Per Flange)
16 Pressure Rating
5,000 psi
Nuts for Stud Bolts Bore 13 5/8”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 15
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 13 5/8” x 5M Double Ram BOP
CIW Type U Double RAM Blow Out Preventor
13 5/8” x 5,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 13 5/8” x 5M (BX160) FLANGED
Cavity Standard Bonnets
Bottom Connection and Ring Groove
API 13 5/8” x 5M (BX160) FLANGED
Side Outlets’ (4 each)
API 3 1/8” x 5M (RX35) FLANGED
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
5.8 Gallons -‐ Closed
5.5 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
113“ Approximate Height of Unit
55.88”
Approximate Width of Unit
29.25” Approximate Weight of Unit
14800Ibs
Stud Bolt Size Stud Bolts (Per Flange)
16 Pressure Rating
5,000 psi
Nuts for Stud Bolts Bore 13 5/8”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 16
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 13 5/8” x 10M Single Ram BOP
CIW Type U Double RAM Blow Out Preventor
13 5/8” x 10,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 13 5/8” x 10M (BX159) FLANGED
Cavity Standard Bonnets
Bottom Connection and Ring Groove
API 13 5/8” x 10M (BX159) FLANGED
Side Outlets’ (4 each)
API 4 1/16” x 10M (BX155)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
5.8 Gallons -‐ Closed
5.5 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
114 “ Approximate Height of Unit
66.63”
Approximate Width of Unit
30.25” Approximate Weight of Unit
18400Ibs
Stud Bolt Size Stud Bolts (Per Flange)
20 Pressure Rating
10,000 psi
Nuts for Stud Bolts Bore 13 5/8”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 17
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET CIW Type U 13 5/8” x 10M Double Ram BOP
CIW Type U Double RAM Blow Out Preventor
13 5/8” x 10,000 psi WP
Original Equipment Manufacturer
Cameron Iron Works (CIW)
Model Type U
BOP Unit Details
Top Connection and Ring Groove
API 13 5/8” x 10M (BX159) FLANGED
Cavity Standard Bonnets
Bottom Connection and Ring Groove
API 13 5/8” x 10M (BX159) FLANGED
Side Outlets’ (4 each)
API 4 1/16” x 10M (BX155)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
5.8 Gallons -‐ Closed
5.5 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
114 “ Approximate Height of Unit
66.63”
Approximate Width of Unit
30.25” Approximate Weight of Unit
18400Ibs
Stud Bolt Size Stud Bolts (Per Flange)
20 Pressure Rating
10,000 psi
Nuts for Stud Bolts Bore 13 5/8”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 18
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Shaffer Type SL 13 5/8” x 15M Double Ram BOP
Shaffer Type SL Double RAM Blow Out Preventor
13 5/8” x 15,000 psi
Original Equipment Manufacturer
Shaffer Model Type SL
BOP Unit Details
Top Connection and Ring Groove
API 13 5/8” x 15M (BX159) STUDDED
Top Cavity 14” UltraLock
Bottom Cavity 14” UltraLock
Bottom Connection and Ring Groove
API 13 5/8” x 15M (BX159) FLANGED
Side Outlets’ (4 each)
API 3 1/16” x 15M (BX1554)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
11.56 Gallons -‐ Closed
10.52 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
160“ Approximate Height of Unit
51 ½”
Approximate Width of Unit
68” Approximate Weight of Unit
45000 Ibs
Stud Bolt Size Stud Bolts (Per Flange)
20 Pressure Rating
15,000 psi
Nuts for Stud Bolts Bore 13 5/8”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 19
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Shaffer Type SL 13 5/8” x 15M Double Ram BOP
Shaffer Type SL Double RAM Blow Out Preventor
13 5/8” x 15,000 psi
Original Equipment Manufacturer
Shaffer Model Type SL
BOP Unit Details
Top Connection and Ring Groove
API 13 5/8” x 15M (BX159) STUDDED
Top Cavity 14” UltraLock
Bottom Cavity 14” Poslock w/ 10” Booster
Bottom Connection and Ring Groove
API 13 5/8” x 15M (BX159) FLANGED
Side Outlets’ (4 each)
API 3 1/16” x 15M (BX1554)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
11.56 Gallons -‐ Closed
10.52 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Length of Unit
160“ Approximate Height of Unit
51 ½”
Approximate Width of Unit
68” Approximate Weight of Unit
45000 Ibs
Stud Bolt Size Stud Bolts (Per Flange)
20 Pressure Rating
15,000 psi
Nuts for Stud Bolts Bore 13 5/8”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 20
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Hydrill Type Gk 13 5/8” x 5M Annular BOP
Hydrill Type GK Annular Blow Out Preventor
13 5/8“ x 5,000 psi
Original Equipment Manufacturer
Hydrill Model Type Gk
BOP Unit Details
Top Connection and Ring Groove
API 13 5/8” x 5M (BX160) STUDDED
Trim H2S (Nace MR-‐01-‐75)
Bottom Connection and Ring Groove
API 13 5/8” x 5M (BX160) FLANGED
Pressure Rating
5,000 psi
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
19.76 Gallons – Closed
Bore 7 1/16”
19.76 Gallons – Open
8.24 Gallons -‐ Secondary
Image Not To Scale For Representation Only
Approximate Height of Unit
52 3/16” Clearance Dia
56“
Stud Bolt Size Body Dia 52 ¼“ Approximate Weight of Unit
17320 Ibs
Nuts for Stud Bolts Stud Bolts (Per Flange)
16
Certification
OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 21
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Shaffer Type Spherical 13 5/8” x 5M Ram BOP
Shaffer Type Spherical RAM Blow Out Preventor
13 5/8” x 5,000 psi
Original Equipment Manufacturer
Shaffer Model Spherical
BOP Unit Details
Top Connection and Ring Groove
API 13 5/8” x 5M (BX160) STUDDED
Pressure Rating
5,000 psi
Bottom Connection and Ring Groove
API 13 5/8” x 15M (BX159) FLANGED
Trim H2S (Nace MR-‐01-‐75)
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
23.58 Gallons -‐ Closed
17.41 Gallons – Open
Image Not To Scale For Representation Only
Approximate Height of Unit
48” Approximate Weight of Unit
14300 Ibs
Diameter
50” Bore 13 5/8”
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 22
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Shaffer Type Spherical 13 5/8” x 10M Ram BOP
Shaffer Type Spherical RAM Blow Out Preventor
13 5/8” x 10,000 psi
Original Equipment Manufacturer
Shaffer Model Spherical Wedge type
BOP Unit Details
Top Connection and Ring Groove
API 13 5/8” x 10M (BX159) STUDDED
Top Cavity 14” Standard Bonnets
Bottom Cavity 14” Standard Bonnets
Bottom Connection and Ring Groove
API 13 5/8” x 15M (BX159) FLANGED
Side Outlets’ (4 each)
API 4 1/16” x 10M (BX155)
FLANGED Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
40.16 Gallons -‐ Closed
32.64 Gallons – Open
Image Not To Scale
For Representation Only
Approximate Height of Unit
58 3/8” Approximate Weight of Unit
32575 Ibs
Clearance Dia 64 ½” Body Dia
64 ½“
Stud Bolt Size Stud Bolts (Per Flange)
20 Pressure Rating
10,000 psi
Nuts for Stud Bolts Bore 13 5/8”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 23
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Shaffer Type LWS 20 ¾” x 3M Single Ram BOP
Shaffer Type SL Single RAM Blow Out Preventor
20 ¾” x 3,000 psi
Original Equipment Manufacturer
Shaffer Model Type LWS
BOP Unit Details
Top Connection and Ring Groove
API 20 ¾” x 3M (RX74) STUDDED
Cavity 14” Multilock
Bottom Connection and Ring Groove
API 20 ¾” x 3M (RX74) STUDDED
Side Outlets’ (2 each)
API 3 1/8” x 5M (RX35) FLANGED
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
14.50 Gallons -‐ Closed
13.59 Gallons
– Open
Image Not To Scale For Representation Only
Approximate Length of Unit
138“ Approximate Height of Unit
24”
Approximate Width of Unit
54” Approximate Weight of Unit
11500 Ibs
Stud Bolt Size Stud Bolts (Per Flange)
20 Pressure Rating
3,000 psi
Nuts for Stud Bolts Bore 20 ¾”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 24
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Shaffer Type LWS 20 ¾” x 3M Single Ram BOP
Shaffer Type SL Single RAM
Blow Out Preventor
20 ¾” x 3,000 psi
Original Equipment Manufacturer
Shaffer Model Type LWS
BOP Unit Details
Top Connection and Ring Groove
API 20 ¾” x 3M (RX74) STUDDED
Cavity 14” Poslock Bonnets &
10” Booster Bottom Connection and Ring Groove
API 20 ¾” x 3M (RX74) FLANGED
Side Outlets’ (2 each)
API 3 1/8” x 5M (RX35) FLANGED
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
18.50 Gallons -‐ Closed
17.59 Gallons
– Open
Image Not To Scale For Representation Only
Approximate Length of Unit
172“ Approximate Height of Unit
32 ½”
Approximate Width of Unit
41 ¼” Approximate Weight of Unit
12500 Ibs
Stud Bolt Size Stud Bolts (Per Flange)
20 Pressure Rating
3,000 psi 2” x 15 ¼”
Nuts for Stud Bolts Bore 20 ¾”
Trim H2S (Nace MR-‐01-‐75)
Certification OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 25
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Type MSP 21 ¼“ x 2M Hydrill Annular BOP
Hydrill Type MSP Annular
Blow Out Preventor
21 ¼“ x 2,000 psi WP
Original Equipment Manufacturer
Hydrill Model Type MSP
BOP Unit Details
Top Connection and Ring Groove
API 21 ¼” x 2M (RX73) STUDDED
Cavity Standard Bonnets
c/w Tandem Boosters
Bottom Connection and Ring Groove
API 21 ¼“ x 5M (RX73) FLANGED
Trim H2S (Nace MR-‐01-‐75)
Standard Ring Grooves
Stainless Steel Inlay
Operating Volume
31.95 Gallons -‐ Closed
Bore 21 ¼”
18.93 Gallons – Open
Image Not To Scale For Representation Only
Approximate Height of Unit
52 ½” Clearance Dia
58 ¾“
Stud Bolt Size Body Dia 52 ¾“ Approximate Weight of Unit
15100Ibs
Nuts for Stud Bolts Stud Bolts (Per Flange)
24 Pressure Rating
2,000 psi
Certification
OEM/Lloyds
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 26
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Koomey Control Unit
Model 5 Function Electrics Koomey Control Unit Details
Approximate Height of Unit
99” Approximate Width of Unit
57“
Approximate Length of Unit
72” Approximate Weight of Unit
3600Ibs
Capacity
8 x 11 USG Functions 5
Pumps 2x Air Certification DNV
Image Not To Scale For Representation Only
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 27