1 lan / wan applications r&m fiberliner 2 r&m fiberliner - contents of this presentation...
TRANSCRIPT
1
LAN / WAN applications
R&M Fiberliner
2
R&M Fiberliner - Contents of this presentation
R&M 19” Fiberliner’s features
Integration in 19” Foccos
LAN / WAN applications
Features and Benefits
Competition
3
R&M Fiberliner - Just one module - but backwards compatible!
1st generation
FO Compact Module
19” 3U BreakoutInsertion
2nd generation
19” Fiberliner spliced
19” Fiberliner preassembled
4
Integration into R&M 19” Foccos System
5
R&M Fiberliner - Features and Benefits
R&M splice tray
Only one screw driver needed to dismantle the splice tray and the cover
Uniform labelling
Snap-in frontpanels
6
R&M Fiberliner - Splice tray holder
Fixes the splice tray, simplifies the replacement of pigtails
7
Permit a fast and simple expansion and fitting of SCcompact, SC, ST, FC-PC, LSA, and LSH optical fiber adapters
All front panels with 12-parts division
Snap-in front panels
R&M Fiberliner - Snap-in front panels
8
R&M Fiberliner - Cable entry
Optional cable entry,45° or 90° for breakout cable up to 20 mm diameter
Optional cable entry, 45° or 90° for loose tubes
Up to 20 mm in diameter
Up to 10 mmin diameter
9
R&M Fiberliner - Integration in 19” Foccos
19” 3U FO Global Rack
19” 1U Cable Guide
19” 1U Patch Cable Drawer
19” 1U Contact Drawer
19” 3U Global Patch Panel
19” 1U or 2U Jumper Plastic Ring Panel
19” 1U Sub-rack
Mounting Set for Cable Feed
Cable Clamping Device
10
R&M Fiberliner - Integration in 1U / 3U sub-rack
19” 3U FO-Global Rack for 120 FO connections
19” 1U sub-rack for 36 FO connections
11
R&M Fiberliner - R&M freenet compatible
Up to 6 adapter housingsfor pre. or spl. versionper 19” 3U patch panel
Easy integration with connection module holder RJ 45
12
R&M Fiberliner - LAN-WAN applications
Breakout version Splitter version Splice version
19” slide-in unit
LAN area WAN area
13
R&M Fiberliner - Breakout version
For carrying pre-assembled or field assembled breakout cables.
Used in structured cabling systems especially in the riser zone wiring.
14
R&M Fiberliner - Splitter version
R&M Fiberliner can be fitted with a splitter cassette. (Max. dimensions: 192 x 92 x 8 mm)
Can be used in television distribution and telecom networks to have information distributed on several optical fibers.
15
R&M Fiberliner - Splice version
For holding the R&M splice tray.
Can be used in telecom and television networks as cable termination of FO point-to-point connections.
16
R&M Fiberliner - Fiberliner single parts
FO splice cassette
Cover forFO splice tray
Front panels
Small parts: Cable tie, pigtail holder, knurled screw, insert hinge large, red, and designation strips.
19“ slide-in unit
17
R&M Fiberliner - Features and Benefits
Competitive price
Can be used in R&M 1U and 3U patch panels
Integrated R&M splice tray
Compatible with R&M freenet RJ45 standard swivel units
Simple and cost saving installation
Backwards compatible with the 1st generation compact module
18
R&M Fiberliner - Competition
Points Huber + Suhner Brugg Siecor R&MTelecom Fiberliner
Maximum capacity on 3U 144 Fibers 120 Fibers 72 Fibers 120 Fibers
Snap-in front panel, No No No Yessplice-tray and cover
Can be used as Breakout No No Yes YesVersion
Optional cable entry No No No Yes45° or 90°
Cable tension relief Yes Yes No Yesat the Modul
Uniform labelling Yes Yes No Yes
Simple interchance of No No No Yespigtails
19
R&M Fiberliner - Operating instruction