1 light-emitting diodes light-emitting diodes for general lighting applications d.l. pulfrey...
TRANSCRIPT
1
Light-emitting DiodesLight-emitting Diodes
for general lighting applications for general lighting applications
D.L. Pulfrey
Department of Electrical and Computer EngineeringUniversity of British ColumbiaVancouver, B.C. V6T1Z4, Canada
http://nano.ece.ubc.ca
Day 2, May 28, 2008, Pisa
2
Examples of colour lightingExamples of colour lighting
EFS: Regensburg bridge
EFS:
18 million LEDs in New York city
3
How much energy is used for How much energy is used for lighting?lighting?
4
Lighting: growth and costsLighting: growth and costs
Tsao
5
LED roadmapLED roadmap
Tsao
6
Basic operationBasic operation
Radiative recombination
7
Recombination in direct- and indirect-Recombination in direct- and indirect-bandgap materialsbandgap materials
8
GaP is indirect !GaP is indirect !
How can this work?
EFS
9
Competing NON-radiative recombination Competing NON-radiative recombination processes in direct-bandgap materialsprocesses in direct-bandgap materials
Pierret
Phonons
10
Competing NON-radiative recombination Competing NON-radiative recombination processes in direct-bandgap materialsprocesses in direct-bandgap materials
Which of these 2 mechanisms is more likely to occur?
11
Minority carrier Minority carrier recombination recombination
lifetimelifetime
12
DnpCpAugere
2,
1
Minority carrier recombination lifetimeMinority carrier recombination lifetimedue to non-radiative processesdue to non-radiative processes
SRH Auger
13
http://www.eng.yale.edu/posters150/pdf/woodall.pdf
14
Optical Output PowerOptical Output Power
How do we relate this to current ?
15
What are these terms?
LED efficienciesLED efficiencies
16
Current efficiencyCurrent efficiency
EFS
Fraction of LED current due to electrons recombining in the semiconductor (as opposed to at the contacts)
17
Improving the current Improving the current efficiencyefficiency
EFS
18
Carrier capture, recombination, and Carrier capture, recombination, and escapeescape
EFS
19
Choice of material for Choice of material for heterostructureheterostructure
2.5
2
1.5
1
0.5
05.4 5.5 5.6 5.7 5.8 5.9 6 6.1
Lattice Constant, A
Ban
dg
ap, e
V
Si
Ge
GaAs
GaP
AlP
AlAs
InAs
InP90
8070
6050
4030
2010
a = 5.6533 Amatched to GaAs
°
°
a = 5.8688 Amatched to InP
°
20
AlGaAs/GaAs DH LEDAlGaAs/GaAs DH LED
What is the algorithm for drawing band diagrams?
What is the doping type of the active region?
EFS
21
Heterojunction Band Diagrams
e.g., n-Al0.3Ga0.7As (Eg=1.80eV, =3.83eV) on p-GaAs (Eg=1.42eV, =4.07eV)
Separated system Joined system
E0, El
EC
EF
EV
• e-barrier < h-barrier
22
• Need short radiative lifetime - choose material
What are the B values for Si and GaAs ?
• Need long non-radiative lifetime
How do we get this?
Radiative efficiencyRadiative efficiency
23
Extraction efficiencyExtraction efficiency
Solve #2 with wide bandgap "cladding"
24
TIRTIR
nr is about 3.5 for GaAs-family materials
What is the critical angle?
What is a typical value for ext in a cheap LED?
EFS
25
Creative TIRCreative TIR
EFS
26
ReflectorsReflectors
Put reflector on top and use transparent substrate
27
Contact blockingContact blocking
28
Current spreading layerCurrent spreading layer
29
Photon "voltage"Photon "voltage"
What is the photon energy?
EFS
30
Intensity spectrumIntensity spectrum
EFS
31
The range of AlGaInP LEDsThe range of AlGaInP LEDs
32
The range of AlInGaN LEDsThe range of AlInGaN LEDs
33
Operating voltageOperating voltage
How can the LED survive being operated at VD Eg/q ?
34
Current controlCurrent control
Why is it important to minimize T ?
EFS
35
Effect of T on Effect of T on radrad
EFS
What about the effect of T on non-rad ?
36
Thermal resistanceThermal resistance
37
Brighter and brighterBrighter and brighter
EFS
38
http://astro-canada.ca/_en/a3300.html
• Achromatic
• Impression of white light via RGB
White lightWhite light
39
Generating LED white lightGenerating LED white light
40
Perception of lightPerception of light
41
Eye sensitivity functionEye sensitivity function
Wha
t is
lum
inou
s ef
ficac
y?
42
Colour matching functionsColour matching functions
Cone stimulation
Chromaticity coordinates
43
Chromaticity diagramChromaticity diagram
44
Additive colour mixingAdditive colour mixing
What is the colour gamut?
45
Chromaticity and LEDsChromaticity and LEDs
46
Additive LEDsAdditive LEDs
47
Additive possibilitiesAdditive possibilities
48
Dichromatic LEDDichromatic LED
Not quite complementary, but broadening (35nm for blue and 50nm for green) give possibility of white light.
Li et al.,JAP, 94, 2167, 2003
49
White light using phosphorsWhite light using phosphors
50
Blue/yellow phosphor LEDsBlue/yellow phosphor LEDs
51
Colour renderingColour rendering
Illuminated by:
(a) high-CRI source
(b) low-CRI source
52
Colour rendering with LED Colour rendering with LED arrayarray
53
1/683 W @ 555nm
LI = 1cdIntegrate over sphere LF = 1 lm
50W halogen = 900 lm
Illuminance is LI/area
1 lm/m2 = 1 lux
desk light 500 lux
sunlight = 100,000 lux
LI = luminous intensity
LF = luminous flux
LE = luminous efficiency (lm/Welectrical)
Photometric unitsPhotometric units
54
Incandescent bulbsIncandescent bulbs
55
Fluorescent bulbsFluorescent bulbs
56
Challenges to white LED Challenges to white LED technologiestechnologies
And of course
57
58
What is wall-plug efficiency?
59
60
White-light LEDs are here!White-light LEDs are here!
61
http://www.physorg.com/news93198212.html
Osram announces 1000 lm LEDOsram announces 1000 lm LED
62
The shape of things to comeThe shape of things to come
63
ReferencesReferences
• EFS http://www.ecse.rpi.edu/~schubert/Light-Emitting-Diodes-dot-org/
• LUMILEDS http://www.ele.uva.es/~pedro/optoele/LEDs/LEDilumination.pdf
• Tsao, J.Y., http://www.sandia.gov/~jytsao/
• Pierret, R.F., "Advanced Semiconductor Fundamentals", Addison-Wesley, 1987
• Fonstad, C., http://ocw.mit.edu/NR/rdonlyres/Electrical-Engineering-and-Computer-Science/6-772Spring2003/FDFCCD41-4572-4628-B733-6A535E375BCE/0/Lecture18v2.pdf
64
TerminologyTerminology