1 technical element recognition article 7. 2 all apparatus body position requirements -tucked <...
TRANSCRIPT
![Page 1: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/1.jpg)
1
Technical Element Recognition
Article 7
![Page 2: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/2.jpg)
2
All Apparatus
Body Position Requirements
-Tucked < (less than) 90º hip and knee angle in salto and dance elements
-Piked < 90 º hip angle in salto and dance elements In Double Salto-dismount UB or Vault a stretched
body position must be maintained for a minimum of 360 º BA salto.
FX: In double saltos a stretched body position must be maintained in the 1st salto and min. 3/4 of the second salto.
![Page 3: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/3.jpg)
Stretch Position
3
Requirements stated in the article 7.1 is a guideline for ideal performance of the element. Nevertheless recognition of body position in saltos and flight elements (UB) occurs when the body is in inverted position.
![Page 4: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/4.jpg)
4
Landing from Saltos with twists
Twist must be completed exactly or the Lower DV will be recognized
As dismounts from UB & BB
During the exercise on BB & FX
Vault landings
![Page 5: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/5.jpg)
5
Completion of twists/turns
The placement of the front hand (on back handsprings with turns) or foot is decisive when awarding the difficult value.
![Page 6: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/6.jpg)
6
Falls on Landing
With landing feet first – the DV is awarded Without landing feet first – No DV is awarded
![Page 7: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/7.jpg)
7
Uneven Bars Technique
![Page 8: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/8.jpg)
8
Cast to Handstand – handstand position is considered reached when all body parts arrive within 10 ° of vertical
D PanelIf completed:
within 10 º of vertical – credit DV
>10 º - No DV E Panel >10°-30° = No
deduction >30°- 45° = - 0.10
>45° = - 0.30
![Page 9: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/9.jpg)
9
Swings – circle elements with turns that do not reach the 10 º required and continue movement after turn completion in opposite direction.
Circle Elements without turn and flight elements that do not reach the 10 º required
Note: Circle element without turn: If at least one body part completed below horizontal = another element from Code
Circle elements with or without turns to Handstand & Flight elements from HB to LB
![Page 10: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/10.jpg)
Swing Principle
10
•Swing principle can be applied to any element with turn required to reach handstand but failed more than 10° before handstand. •For swing elements with 1/2 turn all body parts must reach at least horizontal to receive DV, otherwise No DV will be credited and will be considered as Empty swing. i.e. Giant ½ turn
![Page 11: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/11.jpg)
11
Circle elements with or without turns to Handstand & Flight elements from HB to LB
Elements that are required to reach handstand but do not reach the 10° required are devalued
D PanelIf completedwithin 10° - Credit DV> 10° – Credit 1 DV lower
E Panel10° – 30° – 0.10>30º- 45º – 0.30> 45° – 0.50
![Page 12: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/12.jpg)
On HB, Swing fwd. with ½ and flight to hstd on LB; and Swing bwd- straddle flight bwd over LB to hstd on LB
12
-If element is not finished within 10° before vertical (inside the bars), credit 1 DV lower only when gymnast is able to perform half turn and continue to the next element/glide kip. -If element is NOT finished within 10° before vertical (inside the bars) and after support on the LB gymnast falls, NO DV will be credited. -If element IS finished within 10° before vertical (inside the bars) and after support on the LB gymnast falls, DV will be credited.
![Page 13: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/13.jpg)
On HB, Swing fwd. with ½ and flight to hstd on LB; and Swing bwd- straddle flight bwd over LB to hstd on LB
13
If gymnast grabs the LB but falls after passing the LB (outside the bars), DV still will be credited even though she was not able to continue to the next element/glide kip. Follow principle 7.4.3 of the Code: Circle elements without turn and Flight elements from HB to Handstand on LB.
![Page 14: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/14.jpg)
14
Circle elements with turn completed to HSTD
D - Panel If completed within 10º
either side or turn occurs after handstand – credit DV
E - Panel > 10º – 30º - 0.10 > 30º – 45º - 0.30 > 45 º - 0.50
![Page 15: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/15.jpg)
15
Balance Beam and Floor Technique
![Page 16: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/16.jpg)
16
Balance Beam and Floor ExerciseTurn recognition in dance elements
The turn must be completed exactly or the Lower DV will be recognized.
In addition to the foot placement the position of the hip and shoulders should be taken into consideration.
![Page 17: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/17.jpg)
17
Turns on One Leg
Turns on One Leg are in increments of:
180° for BB 360° for FX
![Page 18: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/18.jpg)
18
For under turning:
3/1 turn becomes 2/1 turn (FX) 2/1 turn becomes 11/2 turn (BB)
![Page 19: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/19.jpg)
19
Turn Considerations:
Must be performed on the toes. Have a fixed and well defined shape throughout the turn. The support leg whether stretched or bent does not change the
value of the difficulty. Degree of rotation is determined once the heel and/or free leg
drops. (turn is considered finished)
![Page 20: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/20.jpg)
TURNS ON ONE LEG
For turns on 1 leg requiring the free leg to be at a specific position, the position must be maintained throughout the turn.
If leg is not in prescribed position - credit one DV lower (if there is no element in the Code)
When a gymnast does not maintain her free leg in the specific position from the beginning to the end of the turn, but completes the turn on the support leg, then no deduction for precision will be applied.
20
![Page 21: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/21.jpg)
21
Jumps, leaps, hops with turns(Increments of 180º for BB and FX)
If landing on 2 feet - the placement of the front foot is decisive when awarding the difficulty value.
If landing on 1 foot - the position of the hip and shoulders are decisive.
Dance elements devalued (no DV) due to a technical failure may still be considered beautiful choreography without deduction, provided the body line is pleasing. However, if the body line is not good or there are other execution or technical errors, deductions should be applied.
Various techniques of jump turns are permitted including piking, tucking or straddling the legs in the beginning, middle or end of the turn.
![Page 22: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/22.jpg)
22
Definitions:
Leaps: take off from 1 foot to land on other or 2 feet
Hops: take off from 1 foot and land on the same foot or 2 feet
Jumps: take off from 2 feet and land on 1 or 2 feet
![Page 23: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/23.jpg)
23
Leaps, Jumps, Hops, Turns and Acro elements with 180° Leg Separation (Split)
For missing degrees of leg separation (insufficient split) and or incorrect position of legs:
Insufficient Split
0° - 20° deduct 0.10 > 20° - 45° deduct 0.30
> 45° credit another element from the COP or no DV
![Page 24: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/24.jpg)
24
Incorrect Leg Position
Legs not parallel to floor
0.10
![Page 25: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/25.jpg)
25
Specific Requirements of Selected Dance
Split Leap with Leg Change
Requirement: free leg swing min. 45 °, 180° split of legs D- Panel
- If free leg swings less than 45° or is bent then credit Split Leap.
![Page 26: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/26.jpg)
Specific Requirements of Selected Dance
Requirement: Must show cross split position D- Panel - If free leg swings less than 45° or is bent then
credit – split leap with 1/2 turn (180°) - If Side Split is shown – credit side leap with leg
change (Johnson)
26
Split Leap with Leg Change and 1/2 turn (180°)
![Page 27: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/27.jpg)
27
Ring Principles
– The shape of the body is a “ring” – Feet close to the head (almost touching the head)– Upper body arch and release of the head– 180° split of legs– Front leg at horizontal (except Sissone type jumps)
(Note: up to 10 ° allowance below horizontal)
![Page 28: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/28.jpg)
28
Ring leap/Change Leg Ring leap
D -Panel Back foot below shoulder height and/or front
leg below horizontal (> than 10°) - credit one DV lower
No arch and/or release of head – credit split leap or split leap with leg change
E - Panel - Insufficient Arch position – 0.10- Foot of back leg to shoulder height –
0.10- Front leg is below horizontal
(> 10°) – 0.10Note: Back Leg Bent or Straight is the same element
![Page 29: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/29.jpg)
29
Sheep Jump
Requirement:It must be a circle shape, with head release, upper back arch and feet almost touching the head (open hips).F.I.G. WTCWorlds 2010
E - Panel - Insufficient Arch position – 0.10- Leg or knee separation - 0.10/0.30
![Page 30: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/30.jpg)
30
YANG BO
Requirement: At least over split with front leg at horizontal
D - Panel - No over split but both legs at horizontal - credit 1 DV lower- Over split but front leg > 10° below horizontal = Ring Jump - No arch and/or release of head = Split jump or Sissone (if front
leg below horizontal)- No arch and/or release of head & no split (missing more than
45°) – No DV E - Panel - Insufficient Arch position – 0.10 - Over split, but front leg below horizontal (> 10°) –0.10
![Page 31: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/31.jpg)
31
Tuck Jump with/without turn
Requirement: hip & knee angle at 45° D - Panel > 135° hip angle – No DV E - Panel 90° hip angle – 0.10 > 90° - 135° hip angle – 0.30 If no DV is credited, deductions still
should be applied: -0.30 knees below horizontal
![Page 32: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/32.jpg)
32
Wolf Jump with/without turn
Requirement: hip angle at 45°, knees together D - Panel > 135° hip angle – No DV E - Panel 90° hip angle – 0.10 > 90° - 135° hip angle - 0.30 If no DV is credited, deductions still should be
applied:
-0.30 Extended leg below horizontal
![Page 33: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/33.jpg)
33
Cat Leap with/without turn
Requirement: Evaluate the lowest knee position D - Panel > 135° hip angle – No DV If no DV is credited, deductions still should be applied:
-0.30 knees below horizontal - Lack of alternation – credit Tuck jump -0.10/0.30 if
legs at horizontal or below E - Panel 90° hip angle – 0.10 > 90° - 135° hip angle – 0.30
![Page 34: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/34.jpg)
34
Straddle Pike Jump with/without turn
Both legs above horizontal – no deduction D - Panel > 135° hip angle – No DV E - Panel 90° hip angle – 0.10 > 90° - 135° hip angle – 0.30 If no DV is credited, deductions still should be
applied: -0.30 knees below horizontal
![Page 35: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/35.jpg)
Switch Split Leap with 1/1 turn
When free leg is bent becomes Split Leap 1/1 turn
May deduct for insufficient split.
Deduct for bent free leg.
When free leg is bent and only 1/2 turn is completed becomes Split Leap ½ turn
May deduct for insufficient split and precision.
Deduct for bent free leg.
35
![Page 36: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/36.jpg)
Johnson Leap with ½ Turn
If a gymnast does not complete ½ turn and her free leg swing is less than 45º or is bent – to consider as side split leap (1.101). The gymnast may perform Johnson with ½ turn again in the same exercise and receive DV (if performed correctly).
If a gymnast completes ½ turn, but her free leg swing is less than 45º or is bent – to credit 1 DV lower (there is no side split leap with ½ turn in the COP). If the gymnast repeats Johnson with ½ turn again in the same exercise she would not receive DV (repetition of the same element).
36
![Page 37: 1 Technical Element Recognition Article 7. 2 All Apparatus Body Position Requirements -Tucked < (less than) 90º hip and knee angle in salto and dance](https://reader033.vdocuments.net/reader033/viewer/2022051614/5517e257550346c1568b4584/html5/thumbnails/37.jpg)
37
NOTE
Body Posture: Deductions for body posture faults (form breaks) in body-torso, arms-elbows, legs-knees must be taken in addition to penalties assessed for amplitude.