1. technical specs: 3. installation instruction · 21/09/2016 · dx8 rgbw touch panel dx8 rgbw...
TRANSCRIPT
DX8 RGBW Touch Panel DX8 RGBW Touch Panel
1. Technical Specs:
2. Product Size:
3. Installation Instruction:
Install Uninstall
4. Key Functions: 5. Terminals:
1 2
R4-5A/R4-CC ReceiverTouch Panel
www.ltech-led.com
Input Voltage:
Output Signal:
Working Temp.: Package Size:
Weight(G.W.):
100~240Vac
RF 2.4GHz, DMX512
-30℃~55℃
L113×W112×H50(mm)225g
DX8
R4-CC
Input Voltage: Output Voltage: Output Current: Output Power: Wireless Signal:
Working Temp.: Dimensions: Package Size: Weight(G.W.):
12~48Vdc3~46VdcCC 350/700/1050mA×4CH1.05W~48.3W×4CH Max 193.2W2.4GHz
-30℃~55℃L175×W44×H30(mm)L178×W48×H33(mm)165g
R4-5A CV Receiver
Input Voltage:
Max Current Load:
Max Output Power:
Wireless Signal:
Working Temp.:
Dimensions:
Package Size:
Weight(G.W.):
5~24Vdc
5A × 4CH Max. 20A
100W/240W/480W(5V/12V/24V)
2.4GHz
-30℃~55℃
L175×W44×H30(mm)
L178×W48×H33(mm)
150g
Note: Receiver is sold separately.
CC Receiver
Long press to turn on/off the tone.
Control Mode: 4 Zones Control
100-240VPower Input
ac DMX SignalOutput
RGBW Touch Panel
ON/OFF
Brightness/Speed
Touch Color Circle
R G B/W Color/ /
4 ZonesSelection Keys
Mode
Short press to on/offLong press to adjust color
Short press: Turn on the zoneLong press: Turn off the zone
The Changing Mode
4. Static Yellow5. Static Purple6. Static Cyan
7. Static White8. RGB Jumping9. 7 Colors Jumping
1. Static Red2. Static Green3. Static Blue
10. RGB Color Smooth11. Full-color Smooth
4 3 5 Update Time: 2016.09.21
6. Operating Instruction for Receiver:
Current Selection Switch
LED Lamp Connection Socket
LED Lamp Connection Socket
The Running Light
The Running Light
ID Learning Button
ID Learning Button
5~24VdcPower Input Socket
12~48VdcPower Input Socket
(Operation Table)
www.ltech-led.com
DX8 RGBW Touch PanelDX8 RGBW Touch Panel DX8 RGBW Touch Panel
Could connect RGB/RGBW LEDs.◆
9. DMX Wiring Diagram:8. Wiring Diagram:Wireless
7. Match/Clear Code between Touch Panel & Receiver:
Clear code:
Short press “ID learning button” on the R4-5A/R4-CC receiver, the running light keeps on. Then press the matching zone key on the touch panel, the running light flicker several times, match successfully.
Match code:
Attn: Multiple receivers could be synced to each zone.
Long press “ID learning button” on the R4-5A/R4-CC receiver for 5s, the running light flicker several times, deactivate the matching successfully.