1 Tell us about yourself!

2 Tell us about your spa cover!

NAME

STREET ADDRESS

ZIPSTCITY

PHONE NUMBER EMAIL ADDRESS

Choose your shape:

L1

R

L3

L2

Check here if none of the shapes apply. A plastic template will be required. Ask for Sunstar Template Guide.

( ) -

Color:

SKIRT LENGTH (STD: 2")

TIE-DOWN LENGTH(MIN: 3”, STD: 7")

Fine Details:

DURAFOAM (IN #)

TAPER

3 Sign & send!

Cover specifications above were provided by:Spa Owner assumes all responsibility for cover specifications above.Please allow approximately 4-6 weeks from date of order.

SIGNATURE DATE

SUBTOTAL

DELIVERY

TAX

TOTAL

Spa Owner Dealer

COVER STYLE: DELIVERY?

SPA BRAND SPA MODEL YEAR

PREFERRED CONTACT METHOD:

HINGE:

Please enter all measurements in inches!

! Help! How do I find R (the corner radius)?

To find the radius, you’ll need the following tools:

Carpenter’s square (T-square)

Don’t have a carpenter’s square? You can make one out of cardboard or two rulers; the important thing is to have a square corner!

Ruler/tape measure (if no carpenter square)

Pen and paper

How to measure:

1. Line up the carpenter’s square along theoutside corner of the spa.

2. Measure from Point A (where the curve ofthe corner starts) to Point B (the inner cornerof the square).

3. Record this measurement in inches,rounding down if necessary (i.e. 5.7 inchesrounds down to 5 inches).

This measurement is your radius (R)! Record this number in the R field on the form.

Note: if your cover does not have rounded corners, you can leave R blank.