1 thermodynamics: enthalpy & entropy. 2 thermodynamics thermo = heat (energy) dynamics =...
TRANSCRIPT
11
Thermodynamics:Thermodynamics:Enthalpy & EntropyEnthalpy & Entropy
22
Thermodynamics
thermo = heat (energy) dynamics = movement, motion
33
Some thermodynamic terms chemists use:
System: the portion of the universe that we are considering
open system: energy & matter can transfer
closed system: energy transfers only
isolated system: no transfers
44
Surroundings: everything else besides the system
Isothermal: a system that is kept at a constant temperature by adding or subtracting heat from the surroundings.
55
Heat Capacity:
the amount of heat energy required to
raise the temperature of a substance by 1°C (or 1 K). (little c in equations)
66
Heat Capacity:
Specific Heat Capacity: 1 g by 1°CCapital “C”
Molar Heat Capacity: 1 mole by 1°C
“Cmol”
Symbol Name formula units
c heat capacity q =c*m*∆T J/g*K
C specific heat capacity
q =C*m*∆T J/g*K
CmolarMolar heat capacity amount of heat to raise 1 mole of a substance 1K
q =Cmol*m*∆T J/mol*Ks
88
Calorie: the amount of heat required to raise the temperature of 1g of water by 1°C.
specific heat of water = 1 cal/g °C
1 calorie = 4.18 joules
99
Substance Substance Specific Heat (J/°C•g)
Molar Heat (J/°C•mol)
Al 0.90 24.3
Cu 0.38 24.4
Fe 0.45 25.1
CaCO3 0.84 83.8
EthanolEthanol 2.432.43 112.0112.0
WaterWater 4.184.18 75.375.3
AirAir 1.001.00 ~ 29~ 29
important to:important to: EngineersEngineers Chemist Chemist
1010
Heat Energy Heat Energy
Heat energy = (specific heat)(mass)(ΔT)
q =(C)(m)(Tf-Ti)
Note that ΔT can be ºC or K, but NOT ºF. When just T is being used in a scientific formula it will usually be kelvin (K).)
1111
EXAMPLE:
How many joules of energy are needed to raise the temperature of an iron nail (7.0 g) from 25°C to 125°C?
The specific heat of iron is 0.45 J/°C•g.
Heat energy = (0.45 J/°C•g)(7.0 g)(125-25°C)
= 315 J
1212
Problem:
How much energy does it take to raise the body temperature 2.5ºC (a fever of just over 103ºF) for someone who weighs 110 pounds (50. kg).
Assume an average body specific heat capacity of 3.0 J/ºC•g.
380,000 J
Temperature as a function of time heating 40 g of H2O from -30 C to 125 C at 12 cal /s
-40
-20
0
20
40
60
80
100
120
140
0 500 1000 1500 2000 2500 3000
time in seconds
tem
pera
ture
oC
-30oC to OoC – kinetic energy increases0 o C to 0oC – phase change – potential energy change – solid to liquid0 o C to 100oC – kinetic energy change100 o C to 100oC – phase change – potential energy change – liquid to gas100 oC to 125oC – kinetic energy change
Phase Change Calculations
How much energy and time is needed to take 40.0g of ice from -30oC to 125oC
Given Cice = The specific heat capacity of ice = 0.50 cal/g oC
Lf = The Latent heat of fusion of ice or energy needed to melt
= 80 cal/g
Cwater = The specific heat capacity of water = 1.0 cal/g oC
Lv = The latent heat of vaporization of water = 540 cal/g
Csteam = The specific heat capacity of steam = 0.48 cal/g oC
Rate of heating = 12 cal/ s
Phase Change Calculations
How much energy and time is needed to take 40.0g of ice from -30oC to 125
Q=mcT= 40.0g (0.50 cal/g oC) ( 0oC – (-30.0 oC)) = 600 cal
Time = 600 cal | 12 cal = 50s
1 s
Q= mLf = 40.0g (80 cal )= 3200 cal
g
Time = 3200 cal | 1 s = 267 s
12 cal
Phase Change Calculations
How much energy and time is needed to take 40.0g of ice from -30oC to 125oC
Q=m Ttc= 40.0g (1.0 cal/g oC) ( 100oC – 0 oC) = 4000 cal
Time = 4000 cal / 12 cal / s = 333s
Q= mLv = 40.0g (540 cal /g ) = 21,600 cal
Time = 21,600 cal / 12 cal / s = 1800s
Q=m c T= 40.0g (0.48 cal/g oC) ( 125oC – 100 oC) = 480 cal
Time = 480 cal / 12 cal / s = 40s
Phase Change Calculations
How much energy and time is needed to take 40.0g of ice from -30oC to 125oC
Qprocess = 600cal + 3200 cal + 4000 cal + 480 cal +21,600 cal = 29880cal
S process = 50 sec + 267 sec + 333 s + 1800s + 40 s = 2490 s
It takes 29880 cal and will heat in 2490 seconds
A calorimeter
A calorimeter is used to measure the transfer of heat during a physical or chemical change.
The formula for heat transfer calculations is:q = m(ΔT)CpAmount of heat transferred =mass x change in temperature x specific heatWhere q = heat transferred, ΔT = the change in temperature and Cp = the specific heat. Know the C H2O = 4.18J/(g*K)
If a mass of cadmium of 65.6g and a temperature of 100oC is dropped into 25.0 cm3 of water at a temperature of 23.0oC what will the final temperature be of the water?
Cp = 0.2311 J/oC*g CadmiumHeat loss by metal = heat gained by
water - q = q
- mCpT = mCpTTf= 33.07oC
Phileas Fogg, the character who went around the world in 80 days, was very fussy about his bathwater temperature. It had to be exactly 38.0o C. You are his butler, and one morning while checking his bath temperature, you notice that it’s 42.0oC. You plan to cool the 113.2 kg of water to the desired temperature by adding an aluminum -duckie originally at freezer temperature (-24.0oC). Of what mass should the Al-duckie be?
[Specific heat of Al = 0.900 J/(goC); density of water =1 .00 g/ml]. Assume that no heat is lost to the air.
33.89 Kg for duck (Don’t forget) –q=q
Specific Heat Capacity of Copper
Calorimeters are designed to be well-insulated, so no heat is gained from or lost to the surroundings. If no heating element is used to introduce heat in the system, the total heat transferred (q) for the entire calorimeter system must equal zero. The total heat can be split into heats for each component in the system.
Imagine an experiment in which a hot copper ball is dropped into a calorimeter containing water at room temperature. The copper ball will lose heat, which will be absorbed by the calorimeter and water. Because no heat enters or leaves the system the heat balance for this experiment is
0 = q = qCu + qcal + qw
Specific Heat Capacity of Copper
In this case qCu < 0, because the copper ball will lose heat to the calorimeter and water. Similarly qcal > 0 and qw > 0, because both the calorimeter and the water will gain heat. In chemistry the thermodynamic sign convention is things entering the system a positive in value, and things leaving the system are negative in value.
Specific Heat Capacity of Copper
The basic strategy in calorimetry is to use a temperature change and a heat capacity to determine a heat flow. In this experiment, all substances have the same final temperature (Tf), but not all substances have the same initial temperature. The copper ball is initially at temperature TCu while the calorimeter and water are initially at temperature Ti.
qCu = mCu sCu ( Tf - TCu )
qcal = Ccal ( Tf - Ti )
qw = mw sw ( Tf - Ti )
Specific Heat Capacity of Copper
The heat capacity of the calorimeter must be obtained from a separate calibration experiment (for example, a heating element can be used to introduce a known amount of heat). The specific heat capacity of water is known (4.184 J oC-1), and the temperatures TCu, Ti, and Tf can be measured experimentally. The masses of the copper and water (mCu and mCu) can also be measured experimentally. The only unknown property in the above equations is the specific heat capacity of the copper.
sCu = - (Ccal + mw sw) (Tf - Ti)
mCu (Tf - TCu)
The temperature of a piece of copper with a mass of 95.4g increases from 25oC to 48.0oC when the metal absorbs 849J of heat. What is the specific heat of copper?
What do we know?C = q m x Tmcu = T = q= Don’t know:Ccu = ? J .
g x oCTo solveCcu =
95.4 g
48.0- 25 oC
849 J
849 J
95.4 g * 23oC
= 0.387 J/g·oC
Energy:
"The capacity to do work and/or transfer heat”
2727
Forms of Energy:
Kinetic (Ekinetic = ½mv2) Potential Heat Light (Electromagnetic) Electricity Chemical Nuclear Matter (E = mc2)
2828
Matter (E = mc2)
WORK
2929
First Law of Thermodynamics
The total amount of energy (and mass) in the universe is constant. In any process energy can be changed from one form to another; but it can never be created nor destroyed.
3030
""You can't get something for
nothing"
3131
Enthalpy (Heats) of Reaction
The amount of heat released or absorbed by a chemical reaction at constant pressure (as one would do in a laboratory) is called the enthalpy or heat of reaction. We use the symbol H to indicate enthalpy.
3232
Sign notation (EXTREMELY IMPORTANT!!):
+ΔH indicates that heat is being absorbed in the reaction (it gets cold) endothermic
−ΔH indicates that heat is being given off in the reaction (it gets hot) exothermic
3333
Standard Enthalpy = ΔH° (° is called a “not”)
Occurring under Standard Conditions:: Pressure 1 atm (760 torr) Concentration 1.0 M
3434
Temperature is not defined or part of Standard Conditions, but is often measured at 298 K (25°C).
3535
Standard Enthalpy of Formation - ΔHf°
3636
Standard Enthalpy of Formation
The amount of heat absorbed (endothermic) or released (exothermic) in a reaction in which one mole of a substance is formed from its elements in their standard states, usually at 298 K (25°C).
Also called heat of formation.
3737
Also called heat of formation.
ΔHf° = 0 for any element in its
standard state (the natural
elemental form at 1 atm or 1 M)
at 298 K.
3838
C (graphite,s) + O2 (g) CO2 (g)
ΔHrxn °= 0 kJ/mol + 0 kJ/mol - 393.5 kJ/mol
elements in their productstandard state (one mole)
negative sign heat released -
exothermic rxn
ΔHf ° (CO2 ) = - 393.5 kJ/mol
3939
2H2(g) + O2 (g) 2H2O (g)
ΔHrxn °= 0 kJ/mol + 0 kJ/mol - 483.6 kJ/2mol
elements in their productstandard state (TWO mole)
negative sign heat released -
exothermic rxn Divide by 2 to get to per mole level
ΔHf ° (H2O) = - 241.8 kJ/mol
4040
Hess's Law -- Adding Reactions
The overall heat of reaction (ΔHrxn) is equal to thesum of the ΔHf (products) minus the sum of the ΔHf(reactants):
∆Horxn = ∑ΔHo
f (products) -Σ ΔHof (reactants)
4141
So, by knowing ΔHf of the reactants and products,
we can determine the ΔHrxn for any reaction that
involves these reactants and products.
4242
CO2 is used in certain kinds of fire extinguishers to put out simple fires. It works by smothering the fire with "denser" CO2 that replaces oxygen needed to maintain a fire. CO2 is not good, however, for more exotic electrical and chemical fires.
2Mg(s) + CO2Mg(s) + CO22 (g) (g) 2MgO(s) + C(s) 2MgO(s) + C(s)
ΔΔH°H°f f = 0 kJ/mol -393 kJ/mol -602 kJ/mol + 0 kJ/mol= 0 kJ/mol -393 kJ/mol -602 kJ/mol + 0 kJ/mol
ΔΔH°H°rxn rxn = = Σ (#mol)ΔΣ (#mol)ΔHH°°ff (products) - (#mol)(products) - (#mol)ΔΔH°H°ff(reactants) (reactants)
ΔH°ΔH°rxn rxn =Σ(2)(-602 kJ/mol)+(1)(0 kJ/mol) - Σ(2)(0kJ/mol) + (1)(-393 =Σ(2)(-602 kJ/mol)+(1)(0 kJ/mol) - Σ(2)(0kJ/mol) + (1)(-393 kJ/mol)kJ/mol)
4343
ΔH°rxn = (-1204 kJ/mol) - (-393 kJ/mol)
ΔH°rxn = (-1204 kJ/mol) + 393 kJ/mol
ΔH°rxn = -811 kJ/mol } highly exothermic rxn !!
So, Mg will "burn" CO2 !
4444
You can also add two reactions together to get the ΔHrxn for another new reaction:
Calculate ΔHrxn for the following reaction:
C2H4 (g) + H2O(l) C2H5OH(l) ΔHrxn = ??
Given these two reactions and thermodynamic data:
4545
C2H5OH(l) + 3O2(g) 2CO2 (g) + 3 H2O(l) ΔH°rxn = -1367 kJ/mol
C2H4(g) + 3O2(g) 2CO2 (g) + 2 H2O(l) ΔH°rxn = -1411 kJ/mo
C2H5OH is on the product side of the first reaction -- so we want to switch equation a) around to get C2H5OH on the product side:
2CO2 (g) + 3 H2O(l) C2H5OH(l) + 3O2(g) ΔH°rxn = -1367 kJ/mol 2CO2 (g) + 3 H2O(l) C2H5OH(l) + 3O2(g) ΔH°rxn = +1367 kJ/mol
Note that when we reverse the reaction, ΔH°rxn changes sign!!!
Now we can add the two reactions together to give us the desired net reaction:
C2H4 (g) + H2O(l) C2H5OH(l) ΔHrxn = ??
4646
C2H4(g) + 3O2(g) 2CO2 (g) + 2 H2O(l) ΔH°rxn = -1411 kJ/mol
2CO2 (g) + 3 H2O(l) C2H5OH(l) + 3O2(g) ΔH°rxn = +1367 kJ/mol
C2H4(g) + H2O(l) C2H5OH(l)
1
ΔH°rxn = +1367 kJ/mol + -1411 kJ/mol
ΔH°rxn = - 44 kJ/mol
Calculate the standard enthalpy change, ΔHo, for the formation of 1 mol of strontium carbonate (the material that gives the red color in fireworks) from
its elements.
Sr (s) + C (graphite) + 3/2 O2 (g) SrCO3 (s)
The information available is:Sr (s) + 1/2 O2 (g) SrO (s) ∆Ho = -592 kJ
SrO (s) + CO2 (g) SrCO3 (s) ∆Ho = -234 kJ
C (graphite) + O2 CO2 (g) ∆Ho = -394 kJ
∆Ho = -1220 kJ
The combination of cake and steam produces a mixture called coal gas, which can be used as a fuel or as a starting material
for other reactions. The equation for coal gas is;
2C(s) graphite + 2H2O (g) CH4 (g) + CO2 (g)
Determine the standard enthalpy change for this reaction from the following information
C(s) graphite + 2H2O (g) 2H2 (g) + CO2 (g) ∆Ho = 131.3 kJ
CO (g) + H2O (g) H2 (g) + CO2 (g) ∆Ho = -41.2 kJ CH4 (g) + H2O (g) 3H2 (g) + CO (g) ∆Ho = 206.1
kJ∆Ho = 15.3 kJ
If we have to multiply one (or more) of the reactions by some constant to get them to add correctly, then we also would have to multiply ΔHrxn for that reaction by the same amount.
Problem: Calculate ΔHrxn for the followingreactions given the following ΔHf ° values:
ΔHf ° (SO2, g) = −297 kJ/mol ΔHf ° (SO3, g) = −396 kJ/mol
ΔHf ° (H2SO4, l) = −814 kJ/mol ΔHf ° (H2SO4, aq) = −908 kJ/mol
ΔHf ° (H2O, l) = −286 kJ/mol ΔHf ° (H2S, g) = −20 kJ/mol
S(s) + O2(g) SO2(g)
2SO2(g) + O2(g) 2SO3(g)
SO3 (g) + H2O(l) H2SO4(l)
2H2S(g) + 3O2(g) 2SO2(g) + 2H2O(l)
Calculate Enthalpy of Reaction from Bond
Energies
Because of the principle of conservation of energy the total energy before and after the reaction must not change. So, the energy of a reaction released or absorbed in the reaction must come from the difference in bond energies of the products and the reactants.
Calculate Enthalpy of Reaction from Bond
EnergiesExampleThe bond energy (kJ) for H2, F2, and
HF are 436, 158 and 568 kJ (assume one mole) respectively.
Calculate the enthalpy (energy) of the reaction,
H2(g) + F2(g) 2 HF
H2(g) + F2(g) 2 HF
SolutionBased on the bond energies given, we have
H2 2H D = 436 kJ/molF2 2F D = 158 kJ/mol2H + 2F 2HF H = -568 kJ/mol * 2 = -1136
Adding all three equations and energiesH2(g) + F2(g) = 2 HF ΔH = -542 kJ/equation
Note that D represent bond dissociation energy, and H the enthalpy of the reaction as written. We use ΔH in the last equation to denote enthalpy of change of the overall reaction.