1 · web viewwaf.cw.la2.s05.1 written assignment format learning area: computer system...

TOC.CW.LA1.S01.1

TABLE OF CONSTRUCT

Construct : S01 Computer Security MeasuresAspect : LA1.S01.1 Apply Correct Security Procedures Using AntivirusInstrument : Demonstration

MARK CRITERIA EVIDENCE NOTE

2

1. Choose antivirus software to be used.Write the name of the antivirus software.

Completed ACF.CW.LA1.S01.1.

Use any antivirus software available e.g. Kaspersky, McAfee Virus Scan, Norton Antivirus, Trend Micro PC-Cillin, Dr Solomon, AVG, etc.

Scan area can be specific folder, floppy disk, or flash memory.

Candidate can print screen the scan summary.

If no virus is detected, criterion four is considered done. Write “No action taken”.

Values: Confident Responsible

2

2. Start the antivirus software and select area to be scanned.State the area selected.

23. Scan the selected

area.Copy scan summary.

2

4. Choose and apply any or all of the following when virus is detected – delete/remove, clean/heal, quarantine/move to vault.State action taken

8 TOTAL MARK

TOC.CW.LA1.S01.2

TABLE OF CONSTRUCT

Construct : S01 Computer Security MeasuresAspect : LA1.S01.2 Apply Correct Security Procedures Using Anti-SpywareInstrument : Demonstration


2

1. Choose anti-spyware software to be used.Write the name of the anti-spyware software.

Completed ACF.CW.LA1.S01.2

Suggested anti-spyware software: Lavasoft Ad-Aware SE Personal.

Print screen can be used to display scan summary.

If no spyware is detected, criterion four is considered done. Write “No action taken”.


2

2. Start the anti-spyware software and choose a scan mode.State the scan mode selected.

23. Scan the selected

area.Copy scan summary.

2

4. Choose and apply any of the following when spyware is detected - remove/quarantine the identified object(s).State the action taken.

8 TOTAL MARK

TOC.CW.LA1.AS02.1

TABLE OF CONSTRUCT

Construct : S02 Impact of ICT on SocietyAspect : LA1.S02.1 Locate and present information on impact of ICT on societyInstrument : Verbal Presentation


1

1. Locate information from more than one source. Write the number of sources referred.






2

2. Present the information in 5 to 10 slides.Write the number of slides used.

5

3. Presentation includes:a. Topicb. Contentc. Conclusiond. Sources of

reference

Submit a soft copy or hard copy of the presentation.

2

4. Display cooperation.a. Write the names

of group members.

b. Verbal verification from group members OR assessor’s observation.

10 TOTAL MARK

TOC.CW.LA2.S03.1

TABLE OF CONSTRUCT

Construct : S03 PC AssemblingAspect : LA2.S03.1 Assemble the components of a PCInstrument : Demonstration


21. Fix the processor

correctly.Write processor specification.


CAUTION: Assessor must make sure that the processor is properly fixed by the candidate to avoid permanent damage to it.

Installation of floppy drive OR optical drive is required if and only if they come with the PC.

Candidates must connect all necessary cables.

Values: Accurate Confident Responsible

22. Fix the RAM

correctly.Write RAM capacity.

2

3. Install the power supply unit correctly.Write power (W) and voltage (V) of unit.

24. Install the hard disk

correctly. Write hard disk capacity.

2

5. Install the floppy drive AND/OR optical drive correctly.Write drive(s) installed.

16. Boot up the computer

successfully.

2

7. Check BIOS setup.a. Hard disk

detectedb. Floppy drive

AND/OR optical drive detected

13 TOTAL MARK

TOC.CW.LA2.SO4.1

TABLE OF CONSTRUCT

Construct : S04 Software InstallationAspect : LA2.S04.1 Install operating system, application software and utility programInstrument : Demonstration


3

1. Install an operating system.Write the name of the operating system installed.






3

2. Install application software.Write the name of the application software installed.

3

3. Install a utility program.Write the name of the utility program installed.

9 TOTAL MARK

TOC.CW.LA2.S05.1

TABLE OF CONSTRUCT

Construct : S05 Current and Future Development of Open Source Software and Latest Development in ICT

Aspect : LA2.S05.1 Explain the latest open source software available and the latest development in ICT

Instrument : Written Assignment


41. Explain the latest open

source OSa. Meaningb. TWO examples

Written Assignment

Candidate works in groups of 2 to 4 to conduct study AND/OR for discussion.

Written assignment MUST be done individually.

Refer to WAF.CW.LA2.S05.1.

Suggested duration:2 to 4 weeks

Values: Appreciate Cooperate Confident

4

2. Explain the latest open source application software

a. Meaning b. TWO examples

4

3. Explain the latest development in ICT

a. ONE hardwareb. ONE software

44. Explain pervasive

computinga. Meaning b. TWO examples

2

5. Follow required written assignment format:a. content formatb. document format

2

6. Display cooperation.a. Write the names

of group members.

b. Verbal verification from group members or assessor’s observation.

20 TOTAL MARK

WAF.CW.LA2.S05.1

WRITTEN ASSIGNMENT FORMAT

LEARNING AREA: COMPUTER SYSTEM

Construct : S05 Current and Future Development of Open Source Software and Latest Development in ICT

Aspect : LA2.S05.1 Explain the latest open source software available and the latest development in ICT

Instrument : Written Assignment

Instruction:

Work in groups of two to four to find information and discuss on the latest open source software available and the latest development in ICT. Complete this written assignment individually. You are given two to four weeks to complete this assignment.

Content Format1.0 Introduction

(meaning of open source software, hardware, software, etc)2.0 The Latest Open Source Operating System (OS)

2.1 Meaning of open source OS2.2 Examples of open source OS

(explain two examples)3.0 The Latest Open Source Application Software

3.1 Meaning of open source application software3.2 Examples of open source application software

(explain two examples)4.0 The Latest Development in ICT

4.1 Hardware (state specification OR special features of ONE hardware and compare it to previous model(s))

4.2 Software (state year/date of release, special features of ONE software and compare it to previous version(s))

5.0 Pervasive Computing5.1 Meaning of pervasive computing5.2 Examples of pervasive computing

(explain two examples)6.0 ConclusionReference(give at least two sources of reference)Document Format

cover page o Candidate’s detailso Title: The latest Open Source Software Available and the Latest Development in ICT

page margin - top, bottom, left, and right: 1”, paper size - A4 line spacing - 1.5 lines typeface - Times New Roman, font size- - 12 pts (content), and14 pts for title/heading number of pages - 3 to 10

TOC.CW.LA3.S06.1

TABLE OF CONSTRUCT

Construct : S06 Network Facilities SetupAspect : LA3.S06.1 Crimp and Test UTP CablesInstrument : Demonstration


2

1. Crimp a Straight Cable Skin off the cable jacket. Untwist and straighten each

wire. Arrange the wires according to

the 568B wiring schematic order for both ends.

Cut and insert the wires into a RJ45 connector.

Crimp the cable using a crimping tool.

(assessment done on final product)

Crimped straight and

crossed cables.

At least 1 meter of UTP cable is recommended.

Candidate may refer to the wiring schematic manual in the Learning Module.

The cables must be labelled and kept in a safe place

Values: Precise Confident Abide

22. Check the straight cable is

crimped successfully using a cable tester.

2

3. Crimp a Crossed Cable Skin off the cable jacket. Untwist and straighten each

wire. Arrange the wires according to

the 568A wiring schematic order for one end AND 568B wiring schematic order for the other end.

Cut and insert the wires into a RJ45 connector.

Crimp the cable using crimping tool.

(assessment done on final product)

24 Check the crossed cable is

crimped successfully using a cable tester.

8 TOTAL MARK

TOC.CW.LA3.S06.2

TABLE OF CONSTRUCTConstruct : S06 Network Facilities SetupAspect : LA3.S06.2 Configure and Test Network ConnectionInstrument : Demonstration


21. Set an IP Address.

Write the IP address.


IP Address and Subnet Mask given by the assessor.

Values: accurate confident responsible abide

22. Set a Subnet Mask.

Write the subnet mask.

1

3. Choose another computer to test the configuration.Write the IP address of the computer.

34. Ping the other

computer.Copy the ping result.

8 TOTAL MARK

TOC.CW.LA3.S07.1

TABLE OF CONSTRUCT

Construct : S07 Current and Future Development in Networks and Communications.Aspect : LA3.S07.1 Describe the Latest Development in Networks and CommunicationsInstrument : Written Assignment


8

1. Describe Mobile Computing

a. definition

b. specifications, services, frequencies

Written Assignment

Candidates work in groups of 2 to 4 to conduct the study and for discussion.

Written assignment must be done individually.Suggested duration:2 to 4 weeks

Refer to Written Assignment Format in WAF.CW.LA3.S07.1

Values: cooperate responsibleabide

4

2. Describe Internet Technology and Services a. VoIPb. BLOG

8

3. Describe types of network a. PAN, b. VPN, c. WLAN, d. WIMAX

2

4. Follow required written assignment format:a. content formatb. document format

2

5. Display cooperation.a. Write the names of

group members.b. Verbal verification

from group members or assessor’s observation

24 TOTAL MARK

WAF.CW.LA3.S07.1

WRITTEN ASSIGNMENT FORMAT

LEARNING AREA : COMPUTER NETWORKS AND COMMUNICATIONS

Construct : S07 Current and Future Development in Networks and CommunicationsAspect : LA3.S07.1 Describe the Latest Development in Networks and CommunicationsInstrument : Written Assignment

Instruction:Work in groups of two to four to find information and discuss on the latest development in Networks and Communications. Complete this written assignment individually. You are given two to four weeks to complete this assignment.

Content format1.0 Introduction

(Computer Networks and Communications)2.0 Mobile Computing

2.1 Definition2.2 Specification, services, and frequencies of Mobile Computing

(based on one product e.g. PDA, 3G mobile phone)3.0 Internet Technology and Services

3.1 VoIP3.2 BLOG

4.0 Types of network.4.1 PAN 4.2 VPN4.3 WLAN4.4 WIMAX

5.0 Conclusion (Computer Networks and Communications)

Reference(give at least two sources of reference)

Document Format (use Word Processor) cover page

o Candidate’s detailso Title: The Latest Development in Networks and Communications

page margin - top, bottom, left, and right: 1”, paper size - A4 line spacing: 1.5 lines typeface - Times New Roman, font size - 12 pts (content), 14 pts for title/heading number of pages - 3 to 10

TOC.CW.LA4.S08.1TABLE OF CONSTRUCT

Construct : S08 Multimedia Development

Aspect : LA4.S08.1 Apply All The Phases Of Multimedia Production To Produce An

Interactive Educational Multimedia Project.

Instrument : Project


3

1. Analysis PhaseWrite the project title, objective and target audience.

Completed RF.CW.LA4.S08.1

and a soft copy of the product.

The multimedia product must be interactive, educational and include all five multimedia elements.

Choose any topic from any subjects taught in school: ICT Bahasa Malaysia Bahasa Inggeris Mathematics Science, etc

Authoring Tools: Tool book Presentation s/w Web editor

Values: Creative Integrity Responsible

22. Design Phase

Sketch storyboard.

1

3. Implementation PhaseDevelop a multimedia project based on the storyboard using an authoring tool.Write the name of the authoring tool used.

2

4. Testing PhaseTest the developed multimedia product.Complete the checklist.

7

5. Evaluation PhaseAsk assessor to evaluate the developed multimedia product.a. Content

match the project objective(s)

b. Interface user friendly interactive

c. Navigation all links/buttons

functioning correctly

d. Multimedia Elements text graphic audio video

c. animation

1

6. Publishing Phase Submit a softcopy of the multimedia product.Write the storage medium used and name of the main file or folder.

16 TOTAL MARKRF.CW.LA4.S08.1

REPORT FORM

LEARNING AREA : MULTIMEDIA

Name of Candidate

IC No

Index No

Construct : S08 Multimedia Development

Aspect : LA4.S08.1 Apply All The Phases Of Multimedia Production To Produce An Interactive Educational Multimedia Project.

Instrument : Project

1. ANALYSIS PHASE

Project Title

Objective(s)

Target Audience

2. DESIGN PHASE (attach storyboard if space provided not enough)

3. IMPLEMENTATION PHASE

Authoring tool

4. TESTING PHASE

CHECKLIST FORM

Items YES NO

A Content

Match the project goal

B Interface

User-friendly

Interactive

CNavigation

All links/buttons functioning correctly

5. EVALUATION PHASE(to be carried out by the assessor using ACF.CW.LA4.S08.1)

6. PUBLISHING PHASE

Storage Medium

Main File/Folder Name

Candidate’s Signature

------------------------------

TOC.CW.LA4.S09.1

TABLE OF CONSTRUCT

Construct : S09 Current and Future Development of Multimedia

Aspect : LA4.S09.1 Gather Examples of Immersive Multimedia In Education, Business or

Entertainment

Instrument : Scrapbook


21. Front cover includes

a. topicb. name of

candidate


AND Scrapbook

Candidate compiles articles, pictures, drawings from different types of sources such as newspapers, magazines, Internet, etc into a scrapbook based on any of the following:

Immersive Multimedia in Education

Immersive Multimedia in Business

Immersive Multimedia in Entertainment

Scrapbook must be done individually.

Values: creative responsibleappreciate

22. Scrapbook contains at

least SIX pages excluding front and back covers.

23. Collections are relevant

to the topic chosen.

24. State source and/or

date in the scrapbook.

25. Submit

RF.CW.LA4.S09.1

10 TOTAL MARK

RF.CW.LA4.S09.1

REPORT FORM

LEARNING AREA : MULTIMEDIA

Name of Candidate IC No Index No

Construct : S11 Current And Future Development Of MultimediaAspect : LA5.S11.1 Gather Examples of Immersive Multimedia In Education, Business

Or EntertainmentInstrument : Scrapbook

Activity Log (record all activities carried out in compiling the scrapbook)

Date Activity Remarks


------------------------------

TOC.CW.LA5.S10.1

TABLE OF CONSTRUCT

Construct : S10 Program Development

Aspect : LA5.S10.1 Apply Program Development Phases To Develop A Problem-Solving Program

Instrument : Practical Session


4

1. Problem Analysis a. Write the problem

statement.b. List all the required

input itemsc. Write the expected

output.d. Write the formula to be

used.


ANDSubmitted program.

Duration of practical session: 2 periods

Choose any of the suggested projects (refer to APPENDIX B) or propose a new project.

Submit executable file

and/or project file and

form(s).

During evaluation, assessor runs the candidate’s program to validate the output in 4(b) using the data in 4(a).

Values:1. Accurate2. Confident3. Responsible4. Abide

6

2. Program Designa. Write the pseudocode.

ORDraw the flowchart.

b. Sketch the user interface design for input.

c. Sketch the user interface design for output.

2

3. CodingDevelop a program based on (1) and (2).Write the name of the project file.

6

4. Testing and Debugginga. State the test data used

for each input item listed in 1(b).

b. Write the output based on 4(a)

c. Compile the program. Write down the name of the executable file.

2 5. DocumentationSubmit report and soft

20 TOTAL MARK

RF.CW.LA5.S10.1REPORT FORM

LEARNING AREA : PROGRAMMING

Name of Candidate

IC No

Index No

Construct : S10 Program DevelopmentAspect : LA5.S10.1 Apply Program Development Phases To Develop A Problem-Solving

ProgramInstrument : Practical SessionAssessment : 1 / 2 / 3 / _

1. Problem Analysis

a. Problem Statement

b. Required Input

c. Expected Output

d. Formula Used

2. Program Design

a. Pseudocode OR Flowchart

b. User Interface

Design for Input

c. User Interface Design for Output

3. Coding

(refer to program submitted) Project File Name: __________________

4. Testing and Debugging

a. State the data used for each input item listed in 1(b).

Input item (s) Input data

b. Write the output based on the input data in 4(a)

Output item(s) Actual Output

c. Name of the executable file

TOC.CW.LA5.S11.1

TABLE OF CONSTRUCT

Construct : S11 Current And Future Development Of The Latest Programming Languages

Aspect : LA5.S11.1 Find Out The Latest Programming LanguagesInstrument : Report


21. Identify and name the two

latest programming languages


Report must be done individually.Suggested duration:

2 weeksValues:

Cooperate Appreciate

12

2. Identify and statea. the developerb. when it was

developedc. purpose (why it

was introduced)/application

d. platforme. approach

(structured/object-oriented/etc)

f. translator used

2 3. State the source of reference.

16 TOTAL MARK

RF.CW.LA5.S11.1

REPORT FORM

LEARNING AREA : PROGRAMMING

Name of Candidate IC No Index No

Construct : S11 Current And Future Development Of The Latest Programming Languages

Aspect : LA5.S11.1 Find Out The Latest Programming LanguagesInstrument : Report

Name of Latest Programming Language

1. 2.

Developer

Year Developed

Purpose

Platform

(OS)

Approach

Translator used

Special features (optional)

Source of Reference


------------------------------

TOC.CW.LA6.S12 1

TABLE OF CONSTRUCT

Construct : S12 Database DevelopmentAspect : LA6.S12.1 Develop A Database ProjectInstrument : Practical Session


21. State the project

title and the objective(s) of the project.


ANDsoft copy of the

database project

Duration of practical session: 2 periods

Choose any of the suggested projects in APPENDIX C or propose a new project.

Draw a line to show the relationship between both tables.Example:

TABLE 1 TABLE 2

Field name …….

1:Mor

M:Nor1:1

Field name …….

Values: accurate confident responsible

8

2. Create all the required tables. a. Name each table.b. State the field

names for each table.

c. State the primary key(s).

d. Relate the tables.Draw a line to show the relationship.

23. Create a form for

each table.

2 4. Enter data into the tables.

2 5. Create a query from two tables.

26. Create a report

based on the query created.

27. Submit the report

form and a soft copy of the developed database project.

20 TOTAL MARK

RF.CW.LA6.S12.1REPORT FORM

LEARNING AREA : INFORMATION SYSTEM

Name of Candidate

IC No

Index No

Construct : S12 Database DevelopmentAspect : LA6.S12.1 Develop A Database ProjectInstrument : Practical SessionAssessment : 1 / 2 / 3 / _

1. Project title

Objective(s)

2. Table 1 Table 2Table name

Field names

Primary key

The relationship between both tables.

3. Name of forms

4. Number of records entered

Table ________________ Table ___________________

5. Criteria used for query

Field Name:Criteria:

6. Name of report

7. Name of file


------------------------------

TOC.CW.LA6.S13.1TABLE OF CONSTRUCT

Construct : S13 Current And Future Developments In Information Systems

Aspect : LA6.S13.1 Find Out Current Developments In Computer Information Systems.

Instrument : Report


21. Define web-based

application.


Report must be done individually.

Suggested duration: 2 weeks

Values: cooperate responsible

22. Give an example of web-

based application.State the function of the application.

13. Name a programming

language used to develop web-based application.

14. Name a DBMS used in

web-based application.

2/05. State an advantage of

web-based application compared to non web-based application.

16. State a vulnerability of

web-based application.

1 7. State source of reference.

10 TOTAL MARK

RF.CW.LA6.S13.1

REPORT FORM

LEARNING AREA : INFORMATION SYSTEM

Name of Candidate

IC No

Index No

Construct : S13 Current And Future Developments In Information Systems

Aspect : LA6.S13.1 Find Out Current Developments In Computer Information Systems.

Instrument : Report

Definition of web-based application

An example of web-based application

Function of the application

An example of a programming language used to develop web-based application.

An example of a DBMS used in the web-based application.

An advantage of web-based application (compared to non web-based application)

A vulnerability of web-based application

Source of Reference


------------------------------

1 · web viewwaf.cw.la2.s05.1 written assignment format learning area: computer system...

Documents