10 hour osha based co urse ksa 10 hour osha based g.i... · email: [email protected] web: wso...

“Making Safety A Way of Life...Worldwide”

Contact Details

Tel. No.: +966 118103600

Email: [email protected]

Web: https://worldsafetygcc.com

WSO National Office for KSA is operating

under the sponsorship of

“The Academy of Sciences Company”

P.O. Box 42504, Bldg. No. 4253 Abi Said Al

Khadri, King Faisal, Riyadh 13215, K.S.A

Training Documents to be Issued

WSO KSA Completion Certificate

WSO KSA HSE Passport ID Card

WSO Membership (Optional)

1

World Safety Organization since 1975

10 HOUR OSHA BASED COURSE (GENERAL INDUSTRY)

Target Audience

This course is intended for entry

level general industry employees

and management.

Prerequisite

There are no prerequisites for this

course.

Completion Time

2 Calendar Days

Course Content

Mandatory: The following are the mandatory topic modules, as speci-

fied by OSHA:

1. International/National OSH Regulation

2. Safety & Health Program

3. Electrical Safety

4. Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire

Protection

5. Hazard Communication

6. Personal Protective Equipment

7. Walking and Working Surfaces

10-hour OSHA Based training

course was based on the latest

OSHA 29 CFR 1910 Standards. The

course covers a variety of general

industry safety and health hazards

which an employee may encoun-

ter. This course emphasizes hazard

identification, avoidance, control

and prevention, not OSHA stand-

ards. The course provides employ-

ees information about their rights

and employer responsibilities.

DISCLAIMER: The training materials used in every courses of WSO National Office for KSA is for education purposes only to inform the reader of occupation-al safety and health best practices and general compliance requirement and is not a substitute for provisions of the OSH Act of 1970 or any governmental regulatory agency of USA . WSO National Office for KSA (WSO KSA) is a branch of WSO World Management Center, USA, and operating in the Kingdom of Saudi Arabia under the sponsorship of "The Academy of Sciences for Medical Education, Riyadh. WSO KSA is also not connected or affiliated with the U.S. Department of Labor (DOL), or the Occupational Safety and Health Administration (OSHA).


Contact Details

Tel. No.: +966 118103600



WSO National Office for KSA is operating

under the sponsorship of


P.O. Box 42504, Bldg. No. 4253 Abi Said Al

Khadri, King Faisal, Riyadh 13215, K.S.A

Training Documents to be Issued

WSO KSA Completion Certificate

WSO KSA HSE Passport ID Card

WSO Membership (Optional)

2 World Safety Organization since 1975


Reward / Award to Employer:

A Free “WSO Honorary Member-

ship Certificate” valid for 3 years

will be awarded to employers who

sponsored the training and WSO

membership of their workers.

Course Content

Electives: At least Two (2) Elective topic modules must be presented.

The following are the module topics specified by OSHA as Electives:

1. Bloodborne Pathogens

2. Ergonomics

3. Fall Protection

4. Hazardous Materials

5. Introduction to Industrial Hygiene

6. Machine Guarding

7. Materials Handling

Optional Courses:

1. Permit Required Confined Spaces

2. Welding, Cutting and Brazing

3. Lock-Out / Tag-Out

Note: While refresher training for

the OSHA 10-Hour course is not

mandated by OSHA or local legis-

lation, we highly recommend it.

OSHA sets minimum standards on-

ly. Numerous studies have proven

refresher training is highly effective

in maintaining higher levels of sub-

ject knowledge and understand-

ing and maximum workforce safe-

ty performance. WSO KSA recom-

mends refresher training every two

(2) years.

DISCLAIMER: The training materials used in every courses of WSO National Office for KSA is for education purposes only to inform the reader of occupation-al safety and health best practices and general compliance requirement and is not a substitute for provisions of the OSH Act of 1970 or any governmental regulatory agency of USA . WSO National Office for KSA (WSO KSA) is a branch of WSO World Management Center, USA, and operating in the Kingdom of Saudi Arabia under the sponsorship of "The Academy of Sciences for Medical Education, Riyadh. WSO KSA is also not connected or affiliated with the U.S. Department of Labor (DOL), or the Occupational Safety and Health Administration (OSHA).

OPTIONAL COURSE:

One (1) hour for an Optional topic

from Elective modules to com-

plete the 10 Hour General Industry

course curriculum. We use this

module to further customize your

requested course content.


MANDATORY MODULE / TOPICS

Required to be completed to

pass the course

Relevant Standards



ELECTIVE MODULE / TOPICS

Required to complete at least 2

modules related to the profes-

sion of the student to pass the

course

Contact Details

Tel. No.: +966 118103600



WSO National Office for KSA is operat-

ing under the sponsorship of


P.O. Box 42504, Bldg. No. 4253 Abi Said

Al Khadri, King Faisal, Riyadh 13215,

K.S.A

DISCLAIMER: The training materials used in every courses of WSO National Office for KSA is for education purposes only to inform the reader of occupa-tional safety and health best practices and general compliance requirement and is not a substitute for provisions of the OSH Act of 1970 or any govern-mental regulatory agency of USA . WSO National Office for KSA (WSO KSA) is a branch of WSO World Management Center, USA, and operating in the Kingdom of Saudi Arabia under the sponsorship of "The Academy of Scienc-es for Medical Education, Riyadh. WSO KSA is also not connected or affiliated with the U.S. Department of Labor (DOL), or the Occupational Safety and Health Administration (OSHA).

Methodology

Day 1 (Course Registration, Course Delivery & Short Quiz)

WSO Membership & Course Registration

International/National OSH Regulation.

Safety and Health Program

Exit Routes, EAP, Fire Prevention Plans and Fire Protection

Hazard Communication

Electrical Safety

Personal Protective and Equipment (PPE)

Walking and Working Surfaces

Bloodborne Pathogens

Ergonomics

Day 2 (Final Assessment)

Written or

Actual Demonstrations

29 CFR 1910

Saudi Labor Law NFPA ANSI Saudi Building Code


Contact Details

Tel. No.: +966 118103600








K.S.A



pass the course


MODULES / COURSE DESCRIPTIONS


Duration

Relevant Standards


Module 1:

International / National OSH Regulation

The course identifies the rights of a workers for a safe, hygienic and

healthy work environment as per the occupational safety and health

international and national regulation and standards. It will discuss the,

ILO OSH Statistics , ILO International Occupational Safety & Health

Standards, Introduction to OSHA, Saudi Labor Law Chapter 1 - Protec-

tion Against Occupational Hazards, Saudi Labor Law Chapter 2 - Pro-

tection Against Major Industrial Accidents, Saudi Labor Law Chapter 3

- Work Injuries, Ministry of Labour Contact and the National Strategic

Program for OSH – Saudi Arabia.

International Labor Organiza-

tion Publications

Occupational Safety and

Health Administration

Saudi Labor Law, Royal De-

cree Number M/51 23

Sha'ban 1426/27 September

2005

Social Insurance Law, Royal

Decree No. M/33 dated

29/11/2000

Global People Strategist: Na-

tional Strategic Program for

OSH – Saudi Arabia

0.5 Hour


Contact Details

Tel. No.: +966 118103600








K.S.A



pass the course




Duration

Relevant Standards


Module 2:

Safety and Health Program

Worker injuries cost not only employers and workers, but everyone. Ac-

cording to the Bureau of Labor Statistics, nearly 24,000 workers are hurt

and 17 are killed during every eight-hour workday. Accidents also cost

businesses over $100 billion dollars every year in direct and indirect

costs. In order to protect workers and reduce the costs of accidents,

many companies create Occupational Safety and Health programs.

Employees will learn to identify the impact of injuries and accidents in

the workplace, elements of safety management, types of workplace

analysis, methods to control workplace hazards, and the several types

of employee safety and health training. This course is intended for em-

ployees who work in any facility that has created and implemented an

occupational safety and health program. It is designed to assist em-

ployers in improving employee understanding, compliance and partic-

ipation with regard to OSH programs and safety initiatives.

OSHA 29 CFR General Duty

Clause Section 5(a)(1)

1.5 Hours


Contact Details

Tel. No.: +966 118103600








K.S.A



pass the course




Duration

Relevant Standards


Module 3:

Exit Routes, Emergency Action Plans, Fire

Prevention Plans and Fire Protection

Unexpected emergencies can happen anytime, anyplace. While we

can't control when and where life-threatening emergencies happen,

being prepared can minimize property damage and will greatly re-

duce the chances of serious injuries or death. This course will teach em-

ployees the basics of what should be in their facility's emergency ac-

tion plan. This course addresses a specific aspect of a broader training

topic. For a more complete training experience, register to WSO KSA

OSHA Based Emergency Response Course.

29 CFR 1910.38-39; 1910 Sub-

part E Appendix

1 Hour


Contact Details

Tel. No.: +966 118103600








K.S.A



pass the course




Duration

Relevant Standards


Module 4:

Hazard Communication

Chemicals can pose a wide range of health and physical hazards,

and exposure to hazardous chemicals is common for workers in a large

variety of industries. When workers are exposed to hazardous chemi-

cals, OSHA requires employers to provide employees with information

about those hazards and training over how to protect themselves and

others from harm. During this course, employees will learn about

OSHA's Hazard Communication (HAZCOM) standard and the methods

for learning about chemical hazards, including labels, safety data

sheets (SDSs) and hazard assessments. This course is designed for em-

ployees who need initial or refresher Hazard Communication

(HAZCOM) training.

29 CFR 1910.1200, the Hazard

Communication Standard

(OSHA)

1 Hour


Contact Details

Tel. No.: +966 118103600








K.S.A



pass the course




Duration

Relevant Standards


Module 5:

Electrical Safety

Electricity is all around us. It makes our lives easier in many ways, but it

can also pose some serious hazards. Employees who take this course

will learn how to recognize the dangers of electricity, possible electrical

injuries, and how to use standard hazard controls.

NFPA 70E 2018; 29 CFR 1910

Subpart S and 1926 Subpart K

1.5 Hours


Contact Details

Tel. No.: +966 118103600








K.S.A



pass the course




Duration

Relevant Standards


Module 6:

Personal Protective Equipment (PPE)

Personal protective equipment, or PPE, has been around throughout

history in various forms. Even everyday clothing is a form of PPE, but

many jobs and workplaces have unique hazards that require addition-

al protection, such as gloves, boots, eye protection and many others.

This course will teach employees to identify the need for PPE, define

the concept of a hazard assessment, things to consider when choosing

PPE, and the different types of PPE used to protect all parts of the

body. This course is intended for general-industry employees who, dur-

ing their regular work duties, are required to use personal protective

equipment.


Health Act (OSHA) of 1970, Sec-

tion 5(a)(1), General Duty

Clause; Occupational Safety

and Health Act (OSHA) of 1970,

Section 5(a)(1), General Duty

Clause; 29 CFR 1910.132; 29

CFR 1910.133; 29 CFR 1910.134;

29 CFR 1910.135; 29 CFR

1910.136; 29 CFR 1910.138

1.5 Hours


Contact Details

Tel. No.: +966 118103600








K.S.A



pass the course




Duration

Relevant Standards


Module 7:

Walking and Working Surfaces

After completing this snippet, employees should be able to understand

the general requirements for walking and working surfaces. Identify

hazards in the workplace associated with walking and working surfac-

es. Identify best practices for eliminating or controlling hazards associ-

ated with walking and working surfaces in the workplace. Recognize

employer requirements to protect workers from walking and working

surface hazards.

29 CFR 1910.22

1 Hour






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 8:

Hazardous Materials

Hazardous materials can be dangerous. However, they can also be

very useful. Hazardous materials are used in manufacturing, service

industries and many other applications. To protect the people who

transport these substances and the public at large, the U.S. Depart-

ment of Transportation (DOT) has created a hazardous materials classi-

fication system Learners who successfully complete this course will

demonstrate knowledge of how to identify general definitions related

to the DOT’s hazardous materials classification. This course is designed

for workers that, during the execution of any job duties, are required to

work with or around hazardous materials.

49 CFR 172.101

1 Hour






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 9:

Bloodborne Pathogens

The Occupational Safety and Health Administration (OSHA) recognizes

that many employees come in contact with human blood or other po-

tentially infectious materials during daily duties and thus are potentially

exposed to this occupational hazard. OSHA’s bloodborne pathogen

standard has served as the basis for implementing policies and practic-

es to minimize workers’ risk of exposure to BBP's, specifically to the Hep-

atitis B virus (HBV), the Hepatitis C virus (HCV) and the Human Immuno-

deficiency Virus (HIV). This course will teach employees about the haz-

ards of bloodborne pathogens in the workplace and the basic controls

required under OSHA’s bloodborne pathogen standard. Employees will

learn how to identify major bloodborne diseases and symptoms, how

pathogens are transmitted and the basics of exposure prevention and

incident response and cleanup.

OSHA Bloodborne Pathogens

Standard, 29 CFR § 1910.1030

1 Hour






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 10:

Industrial Hygiene

There can be many different types of hazards in the workplace, and

many different approaches to addressing those hazards. Industrial hy-

giene is the discipline of reducing worker injury due to chemical and

other exposure hazards. This course will teach employees the back-

ground, principles and role of industrial hygiene. Employees will learn

the history of industrial hygiene, major roles of industrial hygiene in

workplaces, they types of workplace hazards industrial hygiene ad-

dresses and how they are controlled. This course is intended for safety

officers and health and safety professionals who are responsible for

improving safety conditions in their workplaces. This course is also a

component of the OSHA 10 training course.


Health Act (OSHA) of 1970, Sec-

tion 5(a)(1)

1 Hour






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 11:

Ergonomics

Ergonomics is the process of reducing worker injury through effective

workplace design, such as decreasing the amount of bending or

reaching for items, or using equipment to reduce the strain on the hu-

man body. This course will teach employees how to use ergonomics in

industrial settings to reduce injury. Employees will learn how to identify

ergonomic risk factors, potential injuries and methods to minimize or

eliminate ergonomic hazards. This course is intended to provide gen-

eral-industry employees with the ability to identify and improve ergo-

nomic conditions for themselves in the workplace and assists employ-

ers with compliance with OSHA’s General Duty Clause.

OSHA 29 CFR 1910.900

1 Hour






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 12:

Fall Protection

Falling is consistently one of the most common causes of workplace

fatalities. Falls from as little as 4 to 6 feet can cause serious injuries,

sometimes death. There are many different types of work and many

different types of fall hazards. This course will teach employees the im-

portance and practice of consistent fall protection. Employees will

learn about fall hazards, how to identify fall protection methods and

various safe work practices.

OSHA 29 CFR 1910.23-28;

1910.66-68

1 Hour






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 13:

Machine Guarding

Moving machine parts have the potential to cause severe workplace

injuries, such as crushed fingers or hands, amputations, burns, or blind-

ness. Any machine part, function, or process that may cause injury

must be safeguarded. Employees who successfully complete this

course will learn to define machine guarding, locate fundamental ma-

chine areas, machine hazards, the types of machine guards, and the

types of machine devices. This course is intended for employees who,

during their regular work duties, are required to work with or around

machines equipped with guarded machinery, and can assist employ-

ers in meeting the provisions of OSHA’s Machinery and Machine

Guarding standard.

OSHA 29 CFR 1910 Subpart O

211-219

1 Hour






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 14:

Material Handling

Materials handling and storage covers a wide range of activities, from

something simple like moving a few boxes from a closet to a storage

area to something as complicated as hauling tons of steel with a

crane. Learners who successfully complete this course should be able

to recognize safe practices for unloading, the hazards of lifting and

how to safely execute a lift, best practices for storage and housekeep-

ing best practices, including waste management. This course is intend-

ed for warehouse workers and those who work in facilities in which sig-

nificant amounts of materials are stored and moved on a regular basis.

OSHA 29 CFR 1910.176; 29 CFR

1910.22; 29 CFR 1910.37; 29 CFR

1910.132; 29 CFR 1910.133; 29

CFR 1910.135; 29 CFR 1910.136;

29 CFR 1910.138; 29 CFR

1910.178; 29 CFR 1926.250; 29

CFR 1926.252

1 Hours






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 15:

Lock-out / Tag-out

Lockout/tagout is a system that helps ensure workers stay safe while

servicing or repairing equipment by making it physically impossible for

that equipment to run or move. This course will teach employees how

lockout/tagout programs work and the different roles workers must

play to make them successful. Employees will learn to identify the im-

portance of proper lockout/tagout procedures, what workers are au-

thorized to perform those procedures, lock and tag systems used for

lockout/tagout, and the special provisions of lockout/tagout programs.

This course is intended for employees who, during their regular work

duties, are required to perform lockout/tagout procedures, and for

employees who work on equipment that is subject to regular mainte-

nance or repair requiring lockout/tagout.

OSHA 29 CFR 1910.147

1 Hour

OPTIONAL COURSE:

One (1) hour for an Optional

topic from Elective modules to

complete the 10 Hour General

Industry course curriculum. We

use this module to further cus-

tomize your requested course

content.






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 16:

Permit Required Confined Spaces

Confined spaces are some of the most hazardous work environments.

This course will teach employees the hazards and safety precautions

associated with confined spaces, with a heavy emphasis on OSHA

safety requirements. Employees who successfully complete this course

should be able to identify hazards of confined spaces.

OSHA 29 CFR 1910.146

1 Hour

OPTIONAL COURSE:







content.






course




Duration

Relevant Standards

Contact Details

Tel. No.: +966 118103600








K.S.A


Module 17:

Welding, Cutting and Brazing

Hot work is any work that produces fire or sparks, including welding,

flame cutting, soldering, and brazing. Welding and other forms of hot

work can pose a serious health hazard to workers, but training, safe

practices and hazard controls can help workers keep themselves safe.

This course should help employees identify types of hot work and their

hazards, and identify employee roles and responsibilities for hot work.

Employees will also receive information about hazards specific to hot

work, additional hazards associated with hot work, and hazard controls

for performing hot work. This course is provided to assist the employer in

meeting the requirements of OSHA Standard 29 CFR 1910.252, General

Requirements and 254, Arc Welding and Cutting. This course is intend-

ed for employees who perform hot work, including welding, brazing

and torch cutting, as part of their regular work duties.

OSHA 29 CFR 1910.251-254

1 Hour

OPTIONAL COURSE:







content.


Contact Details

Tel. No.: +966 118103600








K.S.A



pass the course

Relevant Standards







course

OPTIONAL COURSE:







content.

DISCLAIMER

The training materials used in every courses of WSO National Office for

KSA is for education purposes only to inform the reader of occupation-

al safety and health best practices and general compliance require-

ment and is not a substitute for provisions of the OSH Act of 1970 or any

governmental regulatory agency of USA . WSO National Office for KSA

(WSO KSA) is a branch of WSO World Management Center, USA, and

operating in the Kingdom of Saudi Arabia under the sponsorship of

"The Academy of Sciences for Medical Education, Riyadh. WSO KSA is

also not connected or affiliated with the U.S. Department of Labor

(DOL), or the Occupational Safety and Health Administration (OSHA).

29 CFR 1910

Saudi Labor Law NFPA ANSI Saudi Building Code