Subwoofer 200mm(W) x 300mm(D) x 300mm(H) Satellite 80mm(W) x 65mm(D) x 240mm(H)

36 5.1 Soundbar100008866

4 5 6 7 8

9 10 11 12

What’s in the Box? Check to make sure you have everything below. Get to Know Your 36'' 5.1 SOUNDBAR Get to Know Your 36'' 5.1 SOUNDBAR IMPORTANT SAFETY INSTRUCTIONS

1. Speaker2. LED Indicator• Red when the unit is in STANDBY mode.• Lights up yellow in AUX mode.• Lights up green in OPTICAL mode.• Lights up blue in BLUETOOTH mode.• Lights white in HDMI(ARC)mode.• Lights up orange in HDMI IN mode3. Remote Control Sensor4. HDMI IN Port5. HDMI ARC Port

1. Button Switches the unit betwen ON and STANDBY modes.2. Press AUX button, device will play audio from aux input.3. Press OPTICAL button, device will play audio from optical input.4. VOL+ button increases the volume.5. button skip to previous track in Bluetooth mode. 6. button to play/pause music in Bluetooth mode. RESET button to reset device to the factory default settings. 7. VOL- button decreases the volume.8. BASS- button decrease bass9. TREB- button decrease treb10. Press EQ button to select music, movie and talk EQ mode.11. button mutes the unit or resumes the sound.12. Press HDMI IN button, device will play audio from HDMI IN input.13. Press HDMI ARC button, device will play audio from HDMI ARC input.14. Bluetooth Connection switches to Bluetooth mode, press and hold to enable bluetooth pairing if there is an existing connection then disconnect the devices, unit will enter pairing mode.15. button skip to next track in Bluetooth mode.16. BASS+ button increase bass17. TREB+ button increase treb

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

1.Read these instructions – All the safety and operating instructions should be read before this product is operated. 2.Keep these instructions – The safety and operating instructions should be retained for future reference. 3.Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow all instructions – All operating and use instructions should be followed. 5.Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.6.Clean only with dry cloth.7.Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9.Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10.Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.11.Only use attachments/accessories specified by the manufacturer.12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

13.Unplug the apparatus during lightning storms or when unused for long periods of time.14.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15.CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.16.Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.17.WARNING: Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc).18.WARNING：Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.19.WARNING：To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.

20.WARNING: The mains plug or appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. or

21. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Attention should be drawn to environmental aspects of battery disposal. The product is designed to use in moderate climates.

6. OPTICAL Port7. AUX IN Port8. AC IN Port9. Button Switches the unit between ONand STANDBY modes10. SOURCE Button Selects the input source11. VOL- Button Decreases the volume12. VOL+ Button lncreases the volume

Rear View of Subwoofer

Rear View of Satelites

AC 100~240V Power Socket

ON/OFF Switch

RCA IN Port

RCA IN Port

R

L

HDMIIN

HDMIARC

1

2

3

56

4

78

9

11

10

121314

16

15

17

HDMIIN

HDMIARC

Use a HDMI cable (included) to connect the TV’s HDMI OUT Port to the soundbar’s HDMI IN Port.

Use a 3.5mm to RCA stereo audio cable (not included) to connect the TV’s audio output Portto the soundbar’s AUX IN port.

Use a 3.5mm to 3.5mm stereo audio cable (included) to connect the TV’s headphone Port to the soundbar’s AUX IN port.

Please note the soundbar has HDMI CEC function

Use a HDMI to HDMI cable (included) to connect the TV’s HDMI (ARC)port to the soundbar’s HDMI(ARC) port.

HDMI cable (included) length is 1.7m

HDMI cable (included) length is 1.7m

HDMI IN

HDMI (ARC)

Using the HDMI IN or HDMI ARC connection

3.5mm to 3.5mm length is 1.1m

Optical cable length is 1.1m

Use an optical cable (included) to connect the TV’s OPTICAL OUT Port to the soundbar’s OPTICAL Port.

Using the AUX or Optical ConnectionBluetooth Connection and 5.1 System Connection

Subwoofer

Satelites SpeakersSatelites Speakers

Pairing the subwooferPair manually: Long press mute on the remote for 7s, then long press pairing button on subwoofer for 3s, soundbar's current LED indicator and subwoofer's mixed-color(mixed by red and blue) LED will quick blink until be paired each other. After connected, led indicator will remain solid bright.PS: Subwoofer is paired with soundbar before ex-factory, when power on, they will beconnected each other automatically.

RCA to RCA cable length is 4.4m; power cord length is 1.4m

R

L

Bottom view of the unit

To the Power outlet

5.1

100008866

AC IN Input AC 120V 60Hz

400W

9.8Kg

100W

5.1

5.1

small object

small objectaKeep loose small subject away from

young children

Connect the AC IN port to the power outlet by power cable.

Establish bluetooth connectionWhen unit powers on, press source button on soundbar or press the bluetooth key on the remote change to bluetooth(Bluetooth ID: Onn 36" 5.1 Soundbar ) mode to enter bluetooth pairing mode, the blue LED indicator will fast flash, the LED indicator remain solid bright when bluetooth connected.

HDMIIN

HDMIARC

1. Main unit2. Subwoofer3. Satellite Speaker x 24. RCA to RCA Cable x 25. Remote Control6. Power Cord x 27. AUX Cable x 18. HDMI Cable x 19. Optical Cable x 110. QSG x 111. User manual x 1

36“ 5.1 SOUNDBAR 36“ 5.1 SOUNDBAR

Main unit Satellite speaker