1078. wood theme sale · specific conditions - 1078. wood theme sale start date 04 september 2018...
TRANSCRIPT
1078. Wood Theme Sale
Sale Information
Number of items : 46
Location : Meslin L'évêque (Belgium)
Tarcienne (Belgium)
Moeskroen (Belgium)
Houthalen (Belgium)
Tenneville (Belgium)
Start date : 04 September 2018 as from 17:00
End date : 18 September 2018 as from 18:50
Viewing day : 22 August 2018 from 14:00 to 16:00
Chemin du Stoquoi, 53
7822 Meslin L'évêque (BE)
24 August 2018 from 14:00 to 16:00
Rue de la barrière, 35/B
5651 Tarcienne (BE)
08 September 2018 from 14:00 to 17:00
rue saint roch, 9
7712 Moeskroen (BE)
11 September 2018 from 15:00 to 17:00
Centrum Zuid, 2049
3530 Houthalen (BE)
11 September 2018 from 15:00 to 17:00
BY APPOINTMENT ONLY
Rue Grande, 30
6971 Tenneville (BE)
Removal day : 28 September 2018 from 12:00 to 16:30
Centrum Zuid, 2049
3530 Houthalen (BE)
28 September 2018 from 12:00 to 16:30
BY APPOINTMENT ONLY
Rue Grande, 30
6971 Tenneville (BE)
28 September 2018 from 14:00 to 18:00
Chemin du Stoquoi, 53
7822 Meslin L'évêque (BE)
BY APPOINTMENT ONLY
rue saint roch, 9
7712 Moeskroen (BE)
BY APPOINTMENT ONLY
de la barrière, 35/B
5651 Tarcienne (BE)
WWW.AUCTELIA.COM
The General Terms and Conditions and the Specific conditions of sale apply to this online Auction
SPECIFIC CONDITIONS - 1078. Wood Theme Sale
START DATE 04 September 2018 as from 17:00
END DATE 18 September 2018 as from 18:50
VIEWING22 August 2018 from 14:00 to 16:00
Chemin du Stoquoi, 53
7822 Meslin L'évêque (BE)
24 August 2018 from 14:00 to 16:00
Rue de la barrière, 35/B
5651 Tarcienne (BE)
08 September 2018 from 14:00 to 17:00
rue saint roch, 9
7712 Moeskroen (BE)
11 September 2018 from 15:00 to 17:00
Centrum Zuid, 2049
3530 Houthalen (BE)
11 September 2018 from 15:00 to 17:00
BY APPOINTMENT ONLY
Rue Grande, 30
6971 Tenneville (BE)
REMOVAL28 September 2018 from 12:00 to 16:30
Centrum Zuid, 2049
3530 Houthalen (BE)
28 September 2018 from 12:00 to 16:30
BY APPOINTMENT ONLY
Rue Grande, 30
6971 Tenneville (BE)
28 September 2018 from 14:00 to 18:00
Chemin du Stoquoi, 53
7822 Meslin L'évêque (BE)
BY APPOINTMENT ONLY
rue saint roch, 9
7712 Moeskroen (BE)
BY APPOINTMENT ONLY
de la barrière, 35/B
5651 Tarcienne (BE)
In order to be able to pick up the Lots, the total amount due has to be paid. The Lots can only be removed if the Buyer shows
on the removal day the proforma invoice and signs the delivery note.
WARNING: The Buyer is fully responsible for the dismantling, loading and transportation of the bought Lots.
WARNING: If Buyers do not collect their goods at the removal date, time and address mentioned above, extra storage and
transport costs will be charged.
AUCTION FEES Auction Fees (based on Final Selling Price per Piece)- Amounts less than €15,000 17% of the final selling price
- Amounts more than €15,000 12% of the final selling price
VAT 21.00 % on the highest bid and/or accepted by the Seller and on the Auction fees
PAYMENTWithin 3 business days of reception by e-mail of the proforma invoice, the Buyer must transfer the total amount due to the
bank account below and mention the invoice number:
Auctelia
ING 363-4520918-79 / IBAN : BE58 3634 5209 1879 / BIC BBRUBEBB
BNPPF 035-7704702-33 / IBAN : BE79 0357 7047 0233 / BIC : GEBABEBB
ORGANIZERAUCTELIA
Rue Emile Francqui, 6
1435 Mont-Saint-Guibert (BE)
+ 32 (0)10/620.660
+ 32 (0)10/620.661
SUPERVISION This online Auction sale is held under the supervision of court Bailiff Alain BORDET, 4031 Angleur-Lige and/or court Bailiff
Marcel MIGNON, 6870 Saint-Hubert.
EXTENSION OF
ONLINE AUCTION If there is at least one Bid within the last 5 minutes of a sale, the closing time is extended by 5 minutes until there is no more
Bid.
If no Bid has been placed on a Lot, then the closing time of the sale of this Lot is extended by 20 minutes.
ATTRIBUTION OF LOTS Within 48 hours of the closing of the Auction (Saturdays, Sundays and Belgian public holidays not included), the Candidate-
Buyer receives confirmation of purchase by e-mail on behalf of the Seller that the Sales contract has been materialised. If the
Candidate-Buyer has not received an e-mail of confirmation within this delay, this means that their Bid did not result in an
Attribution.
TERMS AND
CONDITIONSThe General Terms and Conditions and the Specific conditions apply to this online Auction, as you can find on the website
www.auctelia.com.
TO THE ATTENTION OF
THE CANDIDAT-
BUYER/BUYER
Lots are sold as they are, in the state they are in on the date of Attribution or of the Sales contract, with all the benefits and
burdens attached thereto. Auctelia SA and/or the Seller provide no guarantee relating to hidden or visible defects, nor does it
provide guarantees relating to the wholeness, quantities, the working and/or the usefulness. Defects of any nature
whatsoever, the disappointed expectations of the Buyer or third party buyers do not give right to compensations, damages
and/or settlement. Given that Lots can be viewed before the Sale or the Auction and that the Terms and Conditions are
known to the Buyer, the Buyer is deemed to have carefully examined the Lots, prior to purchase. The Buyer examines the
Lots at his own risk.
TRANSLATION In the case of a discrepancy between translations of these Specific conditions and the original French version of these
Specific conditions, the French version prevails.
Photos Description Start price
ID : 1078-001 Paul & Horstmann Milling machineMake : Priess & Horstmann
Milling machine
Make: Paul & Horstmann
Dimensions: 80 (l) * 100 (h) * 300 (L) cm
400,00 €
Photos Description Start price
ID : 1078-002 Duin Machining center (CNC)Make : Duin
Model : MW1
(CNC) machining center
Make: Duin
Dimensions: 220 (l) * 200 (h) * 310 (L) cm
Arm: 230 cm
Working format: 80 * 40 cm
machine with 4 axles, consisting of:
an overhead shortening saw
two tenon heads placed above each other
One upright axles
an manual table
Overhead shortening saw
Horizontal adjustment : Manual
Vertical adjustment : Manual
Saw blade diameter maximum : ø 450 mm
Axle diameter : ø 30 mm
Engine power : 3 hp
RPM : 2850 rpm
Saw height : 150 mm
Horizontal displacement : 100 mm
Extraction : ø 100 mm (2x)
Two tenon heads placed above each other
Horizontal adjustment : Manual
Vertical adjustment : Manual
Axle diameter : ø 40 mm
Useful clamping length : 100 mm
Max. tenon head diameter : ø 200 mm
Max. tenon head length : 150 mm
Engine power : 4 hp
RPM : 3800 rpm
Horizontal displacement : 100 mm
Vertical displacement : 150 mm
Extraction : ø 140 mm (2x)
One upright axles without a top bearing
Horizontal adjustment : Manual
Vertical adjustment : Manual
Axle diameter : ø 40 mm
Useful clamping length : 180 mm
Max. tool diameter : ø 320 mm
Engine power : 7.5 hp
RPM : 3800 rpm
Horizontal displacement : 150 mm
Vertical displacement : 150 mm
Extraction : ø 140 mm (2x)
Manual table
Angular adjustment straight edge : - 45° + 45°
Max. width of work piece : 345 mm
Anti-chip device clamp : Pneumatic
2 500,00 €
Photos Description Start price
ID : 1078-003 SCM R9 RouterMake : Scm
Model : R9
Router
Brand: SCM
Model: R9
Dimensions: 130 (l) * 175 (h) * 165 (L) cm
Work format: 85 * 80 cm
Operating hours: 3.169
300,00 €
ID : 1078-004 Industrial suction
Central vacuum system
Brand: Mirbo
Engine
Galvanized nozzles:
- in diameter 250: 5 of 250cm, 5 of 125cm, 1 of 80cm
- in diameter 200: 1 of 240cm, 14 of 100cm, 2 of 50cm
- in diameter 150: 3 of 200cm, 1 of 125cm, 3 of 1m
- in diameter 120: 5 of 125cm
- in diameter 180: 2 of 75cm
- Flexible hoses
- Elbows
150,00 €
ID : 8627 Wood Chipper CHIPMake : CHIP
Model : 150
CHIP 150 "tractor version"
Model: tractor version (min 55 HP)
Capacity: for pruning and strains up to Ø 150 mm.
5 000,00 €
ID : 8848 Beech squares
Beech squares (Pack P1): 78 pieces of 800 x 70x70mm (volume = 0.34144m³)
Beech squares (Pack P2): 72 pieces of 800 x 70x70mm (volume = 0.3168m³)
Beech squares (Pack P3): 91 pieces of 800 x 70x70mm (volume = 0.39984m³)
Beech squares (Pack P4): 91 pieces of 800 x 70x70mm (volume = 0.39984m³)
250,00 €
ID : 8849 Beech squares 91 Beech squares (800 x 70 x70 mm -0.388m³) 78 Beech planks (800 x 70 x70mm -
0.34144 m³) 78 Beech squares (800 x 70 x 70 mm - 0.3492 m³) 84 Beech squares (800 x
70 x 70mm - 0.3672 m³)
250,00 €
Photos Description Start price
ID : 8851 Lot of 3 drill bits SDS PLUS length 1000mm- 1 M - diam. 12, 16 and 24mm
3 drill bits SDS PLUS length 1000mm - 1 M - diam 12, 16 and 24mm
condition : new
25,00 €
ID : 8852 NEW 18-50mm pneumatic Finish Nailer
NEW 18-50mm pneumatic Finish Nailer
18 gauge finishing nails.(Available in all good hardware stores)
30,00 €
ID : 8853 New pneumatic finish nailer 25 to 64mm
New pneumatic finish nailer 25 to 64mm
With adjustment of the depth of nailing.
Use 16 gauge nails available in hardware stores.
50,00 €
ID : 8854 Lock high security for utilities, trucks, warehouses etc.
Lock high security for utilities, trucks, doors of warehouses...
Rugged chrome steel
Barrel to 6 pins resistant lockpicking with 3 brass keys
Hasp in 2 parts
Effective anti-theft device for vehicles and doors
20,00 €
ID : 8855 Lot of 3 drill bits SDS MAX head 12, 20 and 30m
3 drill bits SDS MAX head 12, 20 and 30mm
1 x 12mm x 340mm + 1 x 20mm x 500mm + 1 x 30mm x 500mm.
Condition : New
45,00 €
ID : 8856 Socket set 15 pieces, 22 to 46mm square driver 3/4
Socket set 15 pieces, 22 to 46mm square driver 3/4! Very sturdy!
Handle ratchet wrought in one piece with a point of knurled grip
Change direction of rotation lever
Bar in T and extension included
Includes 12 sockets: 22, 24, 26, 27, 28, 30, 32, 33, 36, 38, 41 and 46
60,00 €
Photos Description Start price
ID : 8857 Infrared thermometer with laser aiming
Infrared thermometer with laser aiming
Laser pointer for precise
Temperature range of - 38 ° C (-36.4 ° F) to + 520 ° C (+ 968 ° F)
Accuracy of +/-2 ° C (+/-4 ° F) or 2% of reading (the higher of the two)
Operating condition between 0 ° C and 40 ° C (32 ° F and 104 ° F)
Power supply: 2 batteries AAA (LR03) not included
Condition : New
25,00 €
ID : 8858 Lot of 10 mortar racking diamond blades 115 mm
10 mortar racking diamond blades 115mm
Thickness 6mm.
To be mounted on small grinders 115 or 125m
120,00 €
ID : 8859 Merlin and mass of 4.5 KG - glass-fibre handle
Merlin and mass of 4.5 KG - glass-fibre handle
Condition: New
45,00 €
ID : 8864 Lot of 10 drill bits SDS PLUS head 4-cutting edges 6mm x 160mm
Drill bits SDS PLUS head 4-cutting edges 6mm x 160mm
Diameter: 6mm
Total length: 160mm
Quantity: 10 pieces
Cutting edges in tungsten carbide
Double groove shaft improves the removal of material
Penetrates hard construction materials
Fits all SDS-Plus machines
20,00 €
ID : 8865 Lot of 10 drill bits SDS PLUS head 4-cutting edges 8mm x 160mm
Drill bits SDS PLUS head 4-cutting edges 8mm x 160mm
Diameter : 8mm
Total length : 16 mm
Quantity: 10 pieces
Cutting edges in tungsten carbide
Double groove shaft improves the removal of material
Penetrates hard construction materials
Fits all SDS-Plus machines
24,00 €
Photos Description Start price
ID : 8866 Lot of 10 drill bits SDS PLUS head 4 cutting edges 10mm x 210mm
Drill bits SDS head to 4 cutting edges 10mm x 210mm
Diameter: 10 mm
Total length: 210 mm
Quantity: 10 pieces
Cuttingedges in tungsten carbide
Double groove shaft improves the removal of material
Penetrates hard construction materials
Fits all SDS-Plus machines
32,00 €
ID : 8867 Lot of 10 forest SDS PLUS head 4-sided 12mm x 210mm
Drill bits SDS PLUS head 4-sided 12mm x 210mm
Diameter: 12mm
Total length: 210mm
Quantity: 10 pieces
Cutrting edges in tungsten carbide
Double grove shaft improves the removal of material
Penetrates hard construction materials
Fits all SDS-Plus machines
35,00 €
ID : 8868 Lot of 10 Drill bits SDS PLUS head 4 cutting edged 14mm x 210mm
Drill bits SDS PLUS head 4 edged 14mm x 210mm
Diameter: 12 mm
Total length: 210 mm
Quantity: 10 pieces
Cutting edges in tungsten carbide
Double groove shaft improves the removal of material
Penetrates hard construction materials
Fits all SDS-Plus machines
40,00 €
ID : 8869 Lot of 4 drill bits SDS PLUS 20 x 460mm head 4 cutting edges
Forests SDS PLUS 20 x 460mm head head 4-cutting edges
Diameter 20mm
Length 460mm
Quantity: 4 pieces
Condition ; new
Cutting edges in tungsten carbide
Double groove shaft improves the removal of material
Penetrates hard construction materials
Fits all SDS-Plus machines
60,00 €
Photos Description Start price
ID : 8870 Lot of 4 drill bits SDS PLUS 24 x 460mm head 4 cutting edges
Drill bits SDS PLUS 24 x 460mm head 4 cutting edges
Diam. 24mm
Length total : 460mm
Quantity : 4 pieces
Condition : new
Cutting edges in tungsten carbide
Double groove shaft improves the removal of material
Penetrates hard construction materials
Fits all SDS-Plus machines
70,00 €
ID : 8871 24L Compressor oil bath, motor 2 HP
24L Compressor oil bath, motor 2 HP
Conditon : new
Performance engine of 1 500 W (2 ch) and single phase oil-lubricated, cooled in the air
pump
Pressure tank 24 L, air flow Max 144 L/min and pressure of 8 bar service
Automatic pressure switch, safety valve and thermal protection
For use with a wide variety of air tools in the garage as the workshop
Includes 2 quick couplings 3-in-1, filter air, bottle of oil and transportation kit
87,00 €
ID : 8872 Socket set 21 pieces, 10 to 32mm square drive 1/2
Socket set, 21 pieces, 10 to 32mm square drive 1/2
Chrome-vanadium steel polished
Quick release ratchet handle with plug double density
Cardan and 2 sockets 13/16 "and 5/8" candles
2 extensions of 125 and 250 mm and 250 mm T sliding bar
Socket sizes: 10, 11, 12, 13, 14, 15, 16, 17, 19, 22, 24, 27, 30 and 32 mm
45,00 €
ID : 8883 Lot: PO 011 - sanding belt - various dimensions
Lot: PO 011 - sanding belt - various dimensions
This lot includes:
1 package (30 bands) Make: Dragon - Dimensions: 13 x 455 mm - Grain: 40
1 package (30 bands) Make: Dragon - Dimensions: 13 x 455 mm - Grain: 60
2 packages (30 bands) Make: Dragon - Dimensions: 13 x 455 mm - Grain: 80
1 package (30 bands) Make: Dragon - Dimensions: 13 x 455 mm - Grain: 120
7 packages (3 bands) Make: Klingspor - Dimensions: 75 x 508 mm - Grain: 120
2 packages (3 bands) Make: Klingspor - Dimensions: 105 x 620 mm - Grain: 120
Possible shipment to UPS Access Point (+ €10.00)
20,00 €
Photos Description Start price
ID : 8884 Lot: PO 021 - Sanding belts - 75 x 510 mm
Lot:PO 021 - Sanding belts - 75 x 510 mm
This lot includes:
8 packets (3 bands) Make: Sadu - Dimensions: 75 x 510 mm - Grain: 40
5 packs (3 bands) Make: Sadu - Dimensions: 75 x 510 mm - Grain: 80
6 packets (3 bands) Make: Sadu - Dimensions: 75 x 510 mm - Grain: 120
Possible shipment to UPS Access Point (+ €10.00)
25,00 €
ID : 8885 Lot: PO 031- Sanding Belts - 75 x 533 mm
Lot:PO 031 - Sanding Belts - 75 x 533 mm
This lot includes:
3 packages (3 bands) Make: Sadu - Dimensions: 75 x 533 mm - Grain: 40
1 package (3 bands) Make: Sadu - Dimensions: 75 x 533 mm - Grain: 80
5 packs (3 bands) Make: Sadu - Dimensions: 75 x 533 mm - Grain: 120
Possible shipment to UPS Access Point (+ €10.00)
10,00 €
ID : 8886 Lot: PO 041 - Sanding Belts - 75 x 575 mm
Lot: PO 041 - Sanding Belts - 75 x 575 mm
This lot includes:
5 packs (3 bands) Make: Klingspor - Dimensions: 75 x 575 mm - Grain: 40
5 packs (3 bands) Make: Klingspor - Dimensions: 75 x 575 mm - Grain: 800
7 packs (3 bands) Make: Klingspor - Dimensions: 75 x 575 mm - Grain: 120
Possible shipment to UPS Access Point (+ €10.00)
25,00 €
ID : 8887 Lot: PO 051 - Sanding belts - 75 x 610 mm
Lot: PO 051 - Sanding belts - 75 x 610 mm
This lot includes:
5 packs (3 Strips) Brand: Dragon - Dimensions: 75 x 610 mm - Grain: 40
5 packs (3 Strips) Brand: Dragon - Dimensions: 75 x 610 mm - Grain: 80
6 packs (3 Strips) Brand: Dragon - Dimensions: 75 x 610 mm - Grain: 120
Shipment possible to UPS Access Point (+ 10.00 €)
25,00 €
Photos Description Start price
ID : 8888 Lot: PO 061- Sanding Belts - 98 x 620 mm
Lot: In. 061 - Sanding Belts - 98 x 620 mm
This lot includes:
2 packages (3 bands) Make: Dragon - Dimensions: 98 x 620 mm - Grain: 40
5 packages (3 bands) Make: Dragon - Dimensions: 98 x 620 mm - Grain: 120
Possible shipment to UPS Access Point (+ €10.00)
10,00 €
ID : 8889 Lot: PO 071- Sanding Belts - 100 x 560 mm
Lot: In. 071 - band sanding - 100 x 560 mm
This lot includes:
5 packs (3 bands) Make: Sadu - Dimensions: 100 x 560 mm - Grain: 40
8 packets (3 bands) Make: Sadu - Dimensions: 100 x 560 mm - Grain: 80
7 packages (3 bands) Make: Sadu - Dimensions: 100 x 560 mm - Grain: 120
Possible shipment to UPS Access Point (+ €10.00)
30,00 €
ID : 8890 Lot: PO 081 - Sanding belts - 100 x 600 mm
Lot: PO 081 - Sanding belts - 100 x 600 mm
This lot includes:
3 packs (3 sanding belts) Brand: Dragon - Dimensions: 100 x 600 mm - Grain: 40
8 packs (3 sanding belts) Brand: Sadu - Dimensions: 100 x 600 mm - Grain: 80
4 packs (3 sanding belts) Brand: Dragon - Dimensions: 100 x 600 mm - Grain: 120
Shipment possible to UPS Access Point (+ 10.00 €)
20,00 €
ID : 8891 Lot: PO 091 - Sanding belts - 100 x 610 mm
Lot: PO 091 - Sanding belts - 100 x 610 mm
This lot includes:
3 packs (3 belts) Brand: Sadu - Dimensions: 100 x 610 mm - Grain: 40
3 packs (3 belts) Brand: Sadu - Dimensions: 100 x 610 mm - Grain: 80
5 packs (3 belts) Brand: Dragon - Dimensions: 100 x 610 mm - Grain: 120
Shipment possible to UPS Access Point (+ 10.00 €)
15,00 €
Photos Description Start price
ID : 8892 Lot: PO 101 - Sanding belts - 100 x 620 mm
Lot: PO 101 - Sanding belts - 100 x 620 mm
This lot includes:
6 packs (3 belts) Brand: Sadu - Dimensions: 100 x 620 mm - Grain: 40
2 packs (3 belts) Brand: Sadu - Dimensions: 100 x 620 mm - Grain: 80
Shipment possible to UPS Access Point (+ 10.00 €)
10,00 €
ID : 8893 Lot: PO 111 - Sanding belts - 102 x 552 mm
Lot: PO 111 - Sanding belts - 102 x 552 mm
This lot includes:
4 packs (3 belts) Brand: Dragon - Dimensions: 102 x 552 mm - Grain: 40
4 packs (3 belts) Brand: Dragon - Dimensions: 102 x 552 mm - Grain: 80
5 packs (3 belts) Brand: Dragon - Dimensions: 102 x 552 mm - Grain: 120
Shipment possible to UPS Access Point (+ 10.00 €)
20,00 €
Photos Description Start price
ID : 8896 82 Concrete drill bits - Various sizes (Lot: ME-BE 101)
Lot: ME-BE 101 - 82 Concrete Drills - Various Sizes
This lot includes:
DIAGER : Concrete Bit
[3mm.(1x) - 4mm.(1x) - 8mm.(1x) - 10mm.(2x) -
11mm.(2x) - 16mm.(1x) - 20mm.(1x)]
DIAGER : Ceramik bit
[8mm.(2x) - 10mm.(1x) - 12mm.(2x)]
DIAGER : SDS+ Bit
[6mm.(2x) - 14mm.(1x) - 16mm.(1x) - 10 (50 x 110)mm.(2x) -
10 (550 x 610)mm.(1x) - 12 (100 x 160)mm.(2x)]
IRWIN : Concrete Bit
[10mm.(2x)]
KEIL : Concrete Bit
[6mm.(2x) - 8mm.(2x) - 10mm.(7x) - 12 (400)mm.(1x)]
MACK : Concrete Bit
[3mm.(5x) - 9mm.(3x) - 10mm.(1x) - 12mm.(1x) - 12mm.(4x) -
13mm.(1x) - 15mm.(1x) - 18mm.(2x) - 18mm.(1x) - 22mm.(1x) -
25mm.(1x)]
MACK : Concrete Bit
[10 (400)mm.(1x) - 12 (400)mm.(1x) - 14 (400)mm.(1x) -
20 (400)mm.(1x) - 22 (400)mm.(1x) - 6 (400)mm.(1x) -
8 (400)mm.(4x)]
MACK : SDS+ bits
[16 (300)mm.(1x)]
MACK : Concrete Bit
[SET 4-10mm.(1x)]
PROJAHN : Concrete Bit
[SET 3-10mm.(1x)]
Shipping to UPS Access Point (apd 10.00 €)
100,00 €
Photos Description Start price
ID : 8897 Lot: ME-BE 102 - 72 Concrete Drills - Various Sizes
Lot: ME-BE 102 - 72 Concrete Drills - Various Sizes
This lot includes:
DIAGER: Concrete Wick
[3mm (1x) - 4mm (1x) - 8mm (2x) - 10mm (1x) -
10mm (1x) - 11mm (2x) - 16mm (1x) - 20mm (1x)
DIAGER: Ceramik wick
[8mm (1x) - 10mm (1x) - 12mm (2x)
DIAGER: SDS + wick
[6mm (2x) - 14mm (1x) - 16mm (1x) - 10 (50 x 110) mm (2x) -
10 (550 x 610) mm (1x) - 12 (100 x 160) mm (1x) -
12 (150 x 210) mm (1x)
IRWIN: Concrete Wick
[10mm. (1x)]
KEIL: Concrete Wick
[6mm (1x) - 8mm (2x) - 10mm (7x) - 12 (400) mm (1x)
MACK: Concrete Wick
[3mm (4x) - 9mm (2x) - 10mm (1x) - 12mm (1x) - 12mm (4x) -
13mm (1x) - 15mm (2x) - 18mm (2x) - 22mm (1x) - 25mm (2x)
MACK: Concrete Wick
[12 (400) mm. (1x) - 14 (400) mm. (1x) - 6 (400) mm. (1x) -
8 (400) mm. (3x)
MACK: SDS Wick +
[16 (300) mm. (1x)]
MACK: Concrete Wick
[SET 4-10mm. (2x)]
Shipping to UPS Access Point (apd 10.00 €)
100,00 €
Photos Description Start price
ID : 8898 Lot: ME-BE 103 - 66 Concrete Drills - Various Sizes
Lot: ME-BE 103 - 66 Concrete Drills - Various Sizes
This lot includes:
DIAGER: Concrete Wick
[3mm (1x) - 6mm (1x) - 8mm (2x) - 10mm (1x) - 11mm (1x) - 12mm (2x) - 20mm (1x)
DIAGER: Ceramik wick
[8mm (1x) - 10mm (1x) - 12mm (1x)
DIAGER: SDS + wick
[6mm (1x) - 14mm (1x) - 16mm (1x)
DIAGER: SDS + wick
[10 (150 x 210) mm (1x) - 10 (50 x 110) mm (1x) - 12 (100 x 160) mm (1x) -
12 (150 x 210) mm (1x) - 12 (350 x 410) mm (1x)
IRWIN: Concrete Wick
[10mm (1x) - 14mm (1x)]
KEIL: Concrete Wick
[6mm (1x) - 8mm (2x) - 10mm (8x) - 12 (400) mm (1x)
MACK: Concrete Wick
[3mm (4x) - 9mm (2x) - 10mm (1x) - 11mm (1x) - 12mm (4x) - 15mm (2x) - 16mm (1x) -
18mm. (1x) - 18mm (1x) - 25mm (1x)
MACK: Concrete Wick
[8 (400) mm. (3x)]
MACK: SDS Wick +
[16 (300) mm. (1x)]
MACK: Concrete Wick
[SET 4-10mm. (2x)]
Shipping to UPS Access Point (apd 10.00 €)
100,00 €
ID : 8899 Lot: 302 - 16 jigsaw blades - U-shaped tail Lot: 302 - 16 jigsaw blades - U-shaped tail This lot includes: 1 Blister (2 Blades) Brand:
Ultra - Type: Plastic-Wood - Model: 8613-2 3 Blister (1 Blades) Brand: Wolfcraft - Type:
HM - Model: 2309 1 Blister (3 Blades) Brand: Triplex - Type: HCS - Model: 4002 3 Blister
(2 Blades) Brand: Wolfcraft - Type: HSS - Model: 2307 1 Blister (2 Blades) Brand:
Wolfcraft - Type: HSS - Model: 2308 Shipment possible to UPS Access Point (+ 10.00 €)
10,00 €
ID : 8900 Lot: 303 - 15 jigsaw blades - U-shaped tail
Lot: 303 - 15 jigsaw blades - U-shaped tail
This lot includes:
1 Blister (2 Blades) Brand: Ultra - Type: Plastic-Wood - Model: 8613-2
3 Blister (1 Blades) Brand: Wolfcraft - Type: HM - Model: 2309
2 Blister (3 Blades) Brand: Triplex - Type: HCS - Model: 4002
2 Blister (2 Blades) Brand: Wolfcraft - Type: HSS - Model: 2307
Shipment possible to UPS Access Point (+ 10.00 €)
10,00 €
Photos Description Start price
ID : 8901 Lot: 312 - 26 jigsaw blades - Tail (Bosch-AEG-Métabo)
Lot: 312 - 26 jigsaw blades - Tail (Bosch-AEG-Métabo)
This lot includes:
2 Blister (2 Blades) Brand: Wolfcraft - Type: HSS - Model: 2328
3 Blister (2 Blades) Brand: Wolfcraft - Type: HCS - Model: 2320
2 Blister (2 Blades) Brand: Wolfcraft - Type: HCS - Model: 2323
4 Blister (2 Blades) Brand: Wolfcraft - Type: HSS - Model: 2325
2 Blister (2 Blades) Brand: Wolfcraft - Type: HSS - Model: 2327
Shipment possible to UPS Access Point (+ 10.00 €)
20,00 €
ID : 8902 Lot: 313 - 28 jigsaw blades - Tail (Bosch-AEG-Métabo) Lot: 313 - 28 jigsaw blades - Tail (Bosch-AEG-Métabo) This lot includes: 3 Blister (2
Blades) Brand: Wolfcraft - Type: HSS - Model: 2328 3 Blister (2 Blades) Brand: Wolfcraft -
Type: HCS - Model: 2320 2 Blister (2 Blades) Brand: Wolfcraft - Type: HCS - Model: 2323
4 Blister (2 Blades) Brand: Wolfcraft - Type: HSS - Model: 2325 2 Blister (2 Blades)
Brand: Wolfcraft - Type: HSS - Model: 2327 Shipment possible to UPS Access Point (+
10.00 €)
20,00 €
ID : 8903 Lot: 327 - 36 Jigsaw blades - TailLot: 327 - 36 Jigsaw blades - Tail This lot includes: 1 Blister (5 Blades) Brand: Wilpu -
Type: CV - Model: HC33 1 Blister (5 Blades) Brand: Wilpu - Type: HGS-CV - Model:
HGS24 1 Blister (5 Blades) Brand: Wilpu - Type: Bi-Metal - Model: HC19R bi (Reverse
Tooth) 1 Blister (3 Blades) Brand: Wilpu - Type: HM - Model: D2 1 Blister (5 Blades)
Brand: Wilpu - Type: HCS - Model: HC12K 1 Blister (3 Blades) Brand: Triplex - Type:
HSS - Model: 4041 1 Blister (3 Blades) Brand: Triplex - Type: HCS - Model: 4037 1
Blister (5 Blades) Brand: Sadu - Type: CV - Model: 100010A 1 Blister (2 Blades) Brand:
Lenox - Type: Bi-Metal - Model: BT456S Shipment possible to UPS Access Point (+
10.00 €)
35,00 €
ID : 8904 Lot: 328 - 36 Jigsaw blades - Tail Lot: 328 - 36 Jigsaw blades - Tail This lot includes: 1 Blister (5 Blades) Brand: Wilpu -
Type: CV - Model: HC33 1 Blister (5 Blades) Brand: Wilpu - Type: HGS-CV - Model:
HGS24 1 Blister (5 Blades) Brand: Wilpu - Type: Bi-Metal - Model: HC19R bi (Reverse
Tooth) 1 Blister (3 Blades) Brand: Wilpu - Type: HM - Model: D2 1 Blister (5 Blades)
Brand: Wilpu - Type: HCS - Model: HC12K 1 Blister (3 Blades) Brand: Triplex - Type:
HSS - Model: 4041 1 Blister (3 Blades) Brand: Triplex - Type: HCS - Model: 4037 1
Blister (2 Blades) Brand: Lenox - Type: HCS - Model: CT416SC 1 Blister (5 Blades)
Brand: Sadu - Type: CV - Model: 100010A Shipment possible to UPS Access Point (+
10.00 €)
35,00 €
ID : 8906 Lot of 4 circular saw blades (diam. 315mm)
Lot of circular saw blades diam. 315mm.
2 blades to debit make Vira 315 x 3.2 2.2 z = 28 (bore 30 mm)
1 blade to debit make Hitachi 315 mm z = 24 (bore 30mm)
1 blade DEWALT DT4358-QZ Series 60 315 x 3 z = 72 (bore 30 mm)
Possible shipment to UPS Access Point (from € 10.00)
80,00 €
WHY SELL YOUR USED EQUIPMENT WITH AUCTELIA ?
QUALITY DEALS
Auctelia is deal-focused:95% of listed equipment have been sold. We only earn our fee if you make a sale.
BEST PRICE
Online auction is one of the best way to reach the market price.
You always win.
SHORT TIME
Online auction accelerates sales so you save time and stay focused
on your own business.
+31-85-4002222
+32-10-620660
www.auctelia.com/sell
Contact us!
References
95%
45.000+
of listed equipmenthave been sold
buyers & sellers
40 targetedcountries
+33-9-75-18-00-09