10ports antenna's brackets information

6

Upload: rezapmyd

Post on 02-Nov-2015

13 views

Category:

Documents


0 download

DESCRIPTION

The Tongyu 10-port panel antenna bracket distance

TRANSCRIPT

. Tel: +86-760-85318111 Fax: +86-760-85594662 : +86-760-85318111 : +86-760-85594662 www.tycc.cn   Email: [email protected]  www.tycc.cn   : [email protected] 
This publication is issued to provide information only and is not to form part of any order or contract.

Tongyu reserves the right to change specifications without prior notice.
.
TA1013-0002-111100734324
09A-1
 
Installation Kit Material   Hot-dip galvanized steelQ235 
 All screws and nuts   Stainless steel 
Installation Kit Pictrue  
Screw size   Torque   (Nm) 
M8 18
M10 25
M12 32
(1PCS)
NOTE/
1, Only qualified personnel are allowed to install the antenna. 2, Appearance of the actual antenna may differ from the pictures.
1, 2,
13mm (2 PCS)
18mm (2 PCS)
Recommended torque see

Table 1/ 1
Screws size/ Torque/
M8 18 Nm
M12 32 Nm
Make sure the antenna is installed in a safe and suitable location and well clear away from high power lines

Do not attempt to carry out installation when it is raining, snowing or during stormy weather 

Do not attempt to install the antenna on a pole of diameter other than the specified 50 115mm
50115mm
www.tycc.cn