111

16
Project leader: 1)-Mona Fahd Omshgebe. Assistant: 2)-Jwaher Mohammed.

Upload: gadoosh

Post on 21-Aug-2015

87 views

Category:

Technology


0 download

TRANSCRIPT

Project leader:1)-Mona Fahd Omshgebe.

Assistant:2)-Jwaher Mohammed.

3)- Esra Mohammed.

Introduction :

In our project , we offer a set of commands that can serve us on the network by allowing users to know the names of the devices connected in the network and also can help the user to find the last IP connected in the network . know the present Protocol and disply the network settings and determine the path of the network.

Objectives:

1 – Determine the path of the network. 2 – know the names of the devices connected to the network.

3 – know the address of any IP in the network. 4 – Determine the path of network connection.

Tools :

Software:. command line.. name system windows 7.

Hardware :1- computers . 2- switch]3- cable UTP

Star control panel

Network and Internet Network and Sharing Center

Next

0r the is Chose

Chose Network management wireless networks

Adapter properties

Next Chose

Properties 2

ChoseAnd then type in the boxes ip address

ok

(We use the network commands the examples)

1)-About arp

Displays, adds and removes arp information from network devices.

START SERTCH CMD arp

2)-About finger

Lists information about the user.

START SERTCH CMD finger

3)- About hostname.

Display the hostname of the machine the command is being run on. Additional information about the term hostname can be found on our hostname dictionary definition.

START SERTCH CMD hostname

4)-About ipconfig

display the network settings currently assigned and given by a network. This command can be utilized to verify a network connection as well as to verify your network settings.

START SERTCH CMD ipconfig

………………………………………………………………………………………………………………………………………………

5)-About pathping

pathping provides users with the ability of locating spots that have network latency and network loss.

START SERTCH CMD pathping

6)-About ping

Helps in determining TCP/IP Networks IP address as well as determine Problems with the network and assists in resolving them. See the ping definition for a full description.

START SERTCH CMD ping

7)-About nbtstat

MS-DOS utility that displays protocol statistics and current TCP/IP connections using NBT.

START SERTCH CMD nbtstat

8)-About net

The net command is used to update, fix, or view the network or network settings. Listed in the Syntax we have listed each of net commands.

START SERTCH CMD net

………………………………………………………………………………………………………………………………………………

9)-About route

Command to manually configure the routes in the routing table.

START SERTCH CMD route

10)-About tracert

The tracert command is used to visually see a network packet being sent and received and the amount of hops required for that packet to get to its destination.

START SERTCH CMD tracert

11)-About runas

Enables a user to execute a program on another computer as yourself or as another user.

START SERTCH CMD runas

Explain the the steps, and work Explain IP and Word, Help Jwaher commands.

Help Mona Introduction, objectives, PowerPoint and Word.

Bloge and in Required commands executed.

Reference:http://www.computerhope.com/issues/ch000444.htm

http://www.computerhope.com/jargon/e/extecomm.htm

http://www.radmin.com/download/

Connector Bloge

http://hmokhofflin.blogspot.com/