11950 New Kings Rd., Jacksonville, FL USA 32219

Phone: 1.904.924.2500 Fax: 1.904.924.2525

Email: sales@nwe-usa.com www.NationwideEquipment.com

Contact: ed@nwe-usa.com

Hover Craft Barge Hovertrans, Ltd. Design, engineered by BMT Nigel, UK

Built with DH-36 low temp (-20 deg. F) steel rating.

Manufactured in compliance with ABS welding standards.

Drawings reviewed by ABS.

LOA: 210 feet

Beam: 82 feet 8 inches

Depth: 5 feet 7 inches

Deadweight Approx 1100 tons

Barge designed with 450 ton cargo carrying capacity; over a 9000 square foot cargo loading area

Deck outfit:

• One (1) main ramp on bow, roughly full width, intended as main cargo ramp

• Two (2) side access ramps with hydraulic winches

• Hatches: 57 total

• Moon Pool: roughly midship and approx 10 feet x 16 feet

• Two (2) 1121 pound anchors

• Eight (8) deck lights

• Six (6) spill containment kits

Main machinery:

• Four (4) diesel powered Cat 3412’s powering fans (Woodcock and Wilson) inside individual sound

attenuated aluminum engine/fan houses, with fire suppression systems

• Two (2) hydraulic power packs: Cat 3126 engines

Deck Machinery:

• Winches

Four (4) 30 ton Lantec deck winches at each corner

Two (2) anchor winches with capstans on opposite corners fore and aft

• Cranes

Two (2) Grove M977

Coatings:

• Two (2) coats of marine epoxy paint on exterior surfaces

Piping System:

• Fuel oil: 8000 gallon total capacity in four (4) individual aluminum fuel tanks with transfer system

• Hydraulics for winches and windlasses

• Two (2) 181 gallon waste oil tanks

Electrical:

• Container on deck: Cat D150-8 150kw capacity driven by Cat 2682 diesel engine

• Remote control system

Spares:

• Engines: two (2) spare Cat 3412’s for the fans

• Rubber skirting