1360 price schedule (vol.-v) part1

TENDER DOCUMENT

TENDER No.: NRO/CON/566

FOR

FURNISHING AND FINISHING WORKS OF INCOME TAX DEPARTMENT PORTION

IN MCD CIVIC CENTRE, NEW DELHI

VOLUME – V

PRICE SCHEDULE

ENGINEERING PROJECTS (INDIA) LIMITED (A GOVT. OF INDIA ENTERPRISE)

Core-3, Scope Complex, 7, Lodhi Road, New Delhi-110003

TEL NO: 011-24361666, 24366226 FAX NO. 011- 24363426

1

1

a

b

c

NON SCHEDULE ITEM

103,859,000.00

AS PER DSR --

MODULAR FURNITURE

NON SCHEDULE ITEM

38,345,000.00

AS PER DSR --CHAIRS

NON SCHEDULE ITEM

356,666,856.00

AS PER DSR 16,204,941.00

CARPENTARY/ JOINERY/ FC WORKS/ FLOORING/ CIVIL WORKS.

INTERIOR WORKSIn Figures In Words In Figures In Words

TOTAL AMOUNT 2 3 4 5 6

NAME OF WORK : FURNISHING AND FINISHING WORK OF INCOME TAX PORTION IN MCD CIVIC CENTRE, NEW DELHI.

PRICE SCHEDULE

S.No

DESCRIPTION ESTIMATED COST (RS.)

TO BE QUOTED BY TENDERER% (-) BELOW / AT PAR AMOUNT (-) BELOW /AT PAR

1

1In Figures In Words In Figures In Words


S.No



d

e

f

g

AS PER DSR --

ARTWORK AND INTERIOR LANDSCAPING

NON SCHEDULE ITEM

5,653,500.00

AS PER DSR --SIGNAGES

NON SCHEDULE ITEM

9,197,000.00

AS PER DSR --ACRYLIC BLINDS

NON SCHEDULE ITEM

1,992,500.00

AS PER DSR --CARPET

2



S.No



h

2

a

NON SCHEDULE ITEM

103,132,737.00

AS PER DSR --

INTERNAL ELECTRIFICATION WORK

ELECTRICAL WORKS

NON SCHEDULE ITEM

89,434,000.00

AS PER DSR --

LOOSE FURNITURE AND CAFÉ FURNITURE

NON SCHEDULE ITEM

11,090,000.00

3



S.No



3

4a

5 SPRINKLER SYSTEM ( Down Pendants & Modification)+ Fire fighting and PLUMBING SYSTEM

NON SCHEDULE ITEM

66,963,200.00

AS PER DSR --

DUCTING, INSULATION AND ALL HVAC RELATED WORKS

HVAC

NON SCHEDULE ITEM

9,605,767.00

AS PER DSR --

Networking cabling and termination on thepatch panels and on the workstation side

4



S.No



6

7

TOTAL PRICE 840,312,418.00

TOTAL 840,312,418.00

NON SCHEDULE ITEM

10,900,000.00

AS PER DSR --

AUDIO & VIDEO EQUIPMENTS

NON SCHEDULE ITEM

3,227,280.00

AS PER DSR --

KITCHEN EQUIPMENTS

NON SCHEDULE ITEM

13,879,310.00

AS PER DSR 161,327.00

5

INTERIOR WORKS

INCOME TAX DEPARTMENT

SUMMARY OF COST

Sl. No. Description MR ITEMS DSR ITEMS

PART - A Flooring & Cladding Works — 91444814 689,150.00

PART - B False Ceiling Works — 21235074 8,284,650.00

PART - C Partition & Panelling — 89279563

PART - D Doors and Windows — 62185892

PART - E Storage Cabinet — 54234955

PART - F Finishing Works — 9121000

PART - G Miscellaneous Works — 10488863

PART - H Civil Works — 12942423 2,941,597.50

PART -I Steel Works — 2676385

PART - J Dismantling Works — 3057888

TOTAL AMOUNT 356666856 11915398

Applying the latest cost index on DSR items 16204940.6

Grand Total with all Taxes 372871796

Design Plus

A unit of Gujral Design Overseas pvt Ltd 1


DSR

item

code

S No. Description Of Item Unit B Block D Block E2 Block Total

Floors

RATE AMOUNT

PART A-FLOORING & DADO WORKS

Note: For all item of stone and tile the contractors should see

the approved sample board at the office of the

architect and should also submit their own sample

alongwith the tender.

1 Stone Flooring

Providing and fixing 18mm thick pre-polished stone of

approved quality (sample of marble shall be approved

by Engineer-in-charge) in specified size of stone slab as

per drawings on floor and laid over 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand) mix,

including cutting of stone, white cement slurry,

matching pigment,chamfering if any, horizontal

jointings, final polishing as required etc. complete as

per design and drawing.

i Polished Granite Stone flooring (basic rate of stone Rs.

110 / sqft)Including all taxes & tranportation )

sqm 15 15 50 80.0 3144 251,488.00

ii Polished Granite Stone flooring (basic rate of stone Rs.

150 / sqft)Including all taxes & tranportation ) to match

the existing stone installed at site.

sqm 25 25 200 250.0 3686 921,400.00

iii A class Italian Marble Stone Flooring (basic rate of

stone Rs 300 / sqft) Cost to include appropriate coating

of Latecrete make under the stone and at joints and top

surface, all taxes & tranportation ) Proposed stone(

perlato cicilia)sqm 650 500 2400 3550.0 6504 23,089,200.00

iv A class Italian Marble Stone Flooring (basic rate of

stone Rs 450 / sqft) Cost to include appropriate coating

of Latecrete make under the stone and at joints and top

surface, all taxes & tranportation )

sqm 50 45 200 295.0 8672 2,558,240.00

v Polished Kota Stone Flooring. sqm 50 50 300 400.0 850 340,000.00

2 Stone Skirting and dado

Providing and laying skirting and dado in stone in 12

mm average thick cement mortar 1:3 (1 cement : 3

coarse sand) jointed cement slurry mixed with pigment

to match the shade of slab including chamfering,

corner/ edge grinding complete as per specification,

pattern and drawing.

i Polished Granite Stone Skirting and cladding including

ss clamps for cladding above 1 meter (basic rate of

stone Rs. 110 / sqft)Including all taxes & tranportation )

sqm 1.5 1.5 5 8.0 3400 27,200.00

ii Polished Granite Stone Skirting and cladding including

ss clamps for cladding above 1 meter (basic rate of

stone Rs. 150 / sqft)Including all taxes & tranportation )

sqm 2.5 2.5 20 25.0 3900 97,500.00

iii A class Italian Marble Stone Skirting and cladding

including ss clamps for cladding above 1 meter (basic

rate of stone Rs 300 / sqft) Cost to include appropriate

coating of Latecrete make under the stone and at joints

and top surface, all taxes & tranportation )

sqm 65 50 240 355.0 7000 2,485,000.00

iv A class Italian Marble Stone Skirting and cladding

including ss clamps for cladding above 1 meter (basic

rate of stone Rs 450 / sqft) Cost to include appropriate

coating of Latecrete make under the stone and at joints

and top surface, all taxes & tranportation )

sqm 5 4.5 20 29.5 9000 265,500.00

v Polished Kota Stone skirting sqm 5 5 30 40.0 850 34,000.00

MR ESTIMATE

Design Plus

A unit of Gujral Design Overseas Pvt Ltd 1


DSR

item

code


Floors

RATE AMOUNT

3 Staircase flooring

Providing and laying stone in specified size (in single

piece) of stone slab in treads and risers of steps as per

design and pattern shown in drawings laid over 20mm

average thick cement morter 1:3 (1 cement : 3 coarse

sand) jointed with cement slurry mixed with pigment to

match the shade of slab including rounded moulding,

chamfering, corner /edge grinding and mirror polishing,

making nosing as per profile in steps, rubbing and mirror

polishing, drilling holes and grouting for fixing of

staircase railing etc. complete as per specification and

drawing.

3.1 Treads of steps

With 18 mm thick Prepolished Granite stone and joint to

be filled with white cement slurry mixed with pigment to

match the shade of stone including exposed edge

polishing, complete. (Basic rate of prepolished stone Rs.

140/- per Sqft)sqm 50 50 100 200.0 3577 715,440.00

3.2 Risers of step.

With 18 mm thick Prepolished Granite stone and joint to

be filled with white cement slurry mixed with pigment to

match the shade of stone including exposed edge

polishing, complete. (Basic rate of prepolished stone Rs.

140/- per Sqft)sqm 25 25 50 100.0 3252 325,200.00

4.00 Stone Cladding

Providing and fixing prepolished stone cladding in

specified sizes as per drawing laid with 15 mm avg.

thickness of cement mortar 1:3 mixed with

waterproofing compound (1cement : 3 coarse sand)

wet cladding. The item includes providing and fixing

stainless steel cramp of adequate size & design fixed in

cladding as per design, joints sealed with silicon

sealent, pins, dash fastener of approved make and

fixing grit on back of stone with araldite etc including

filling the joints with white cement with matching

pigment, chamfering, making grooves, pointing, edge

polishing, scaffolding, curing etc. complete including

matt finish silicon coating etc. complete as per design &

drawing.

i Granite Stone (basic rate of stone Rs. 140 / sqft.

Including all taxes & tranportation ) sqm 50 50 50 150.0 3900 585,000.00

ii Itlian Marble Stone (basic rate of stone Rs 400 / sqft.

Including all taxes & tranportation ) sqm 50 50 100 200.0 9000 1,800,000.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

5.00 Toilet Counter

i Providing and fixing single piece prepolished 18mm to

20mm thick Granite Stone on counter top and facia

and laid over 12mm thick cement mortar 1:4 (1 cement

: 4 coarse sand) mix including cutting of granite in

proper shape & size, white cement slurry, matching

pigment, making hole for wash basin,mixer & sink with

edge polishing of cut edges, rouding of edges,

chamfering of edges, additional piece stuck with

araldite at bottom ( if desired), silicon sealent as

required etc. complete as per design and drawing.

(basic price Rs. 180 /sft)

sqm 10 10 20 40.0 4336 173,440.00

ii Samsung Staron counter

Providing and fixing single piece acrylic surface(

Samsung staron) top 10mm to 12mm thick on counter

top and facia and laid over 12mm thick marine ply

including cutting of staron in proper shape & size,

making hole for wash basin,mixer & sink with edge

profile as edesired by architect. fixig with approved

adhesive to be part of the quoted cost etc. complete

as per design and drawing. (base rate for staron 650

per sq.mt sanded grey)

sqm 10 10 60 80.0 13000 1,040,000.00

6.00 Granite Stone On Jamb & Ledge

Providing and fixing 18mm to 20mm thick pre-polished

granite stone on jamb & ledge and laid over 20mm

thick cement mortar 1:4 (1 cement : 4 coarse sand)

mix, including cutting of stone,chamfering, edge

polishing, white cement slurry, matching pigment,

silicon sealents etc. complete as per design and

drawing. (basic price Rs. 140 /sft)

i For jamb with polished edges sqm 10 10 60 80.0 3472 277,760.00

ii For ledge with polished edges sqm 15 15 60 90.0 3252 292,680.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

7.00 Vitrified Tile Flooring & Skirting

Providing and laying 9.5 mm thick vitrified tiles of

approved quality and shade for flooring & skirting over

a bed of 20mm thick cement mortar 1:4 (icement : 4

coarse sand) , laid to patterns without but joint grooves

, including necessary cutting, mitring, grouting of joints

with applying silicon sealents between the junction of

floor & wall, etc., complete as per detailed drawings at

all levels.

i Polished Vitrified tile (basic price Rs. 65/sft)Prefered

makes Kajaria Eternity series or equavalent with prior

approval of the of engineer in charge.

sqm 100 100 100 300.0 1626 487,800.00

ii Polished Vitrified tile (basic price Rs. 80/sft)Prefered



sqm 3400 3600 17900 24900.0 1886 46,965,384.00

iii Polished Vitrified tile (basic price Rs. 150/sft)Prefered

makes Kajaria world or equavalent with prior approval

of the of engineer in charge.

sqm 50 50 1000 1100.0 2700 2,970,000.00

8.00 Vitrified Tile Dado

Providing and laying 9.5 mm thick vitrified tiles of

approved quality and shade for dado over a bed of

12mm thick cement mortar 1:4 (icement : 4 coarse

sand) , laid to patterns with 2-3 mm grooves , including

necessary cutting, mitring, grouting of joints with 'BAL'

epoxy based grout (grey) / white antifungal grout

applying silicon sealents between the junction of floor &

wall, etc., complete as per detailed drawings at all

levels.

i Polished Vitrified tile (basic price Rs. 65/sft)Prefered



sqm -

ii Polished Vitrified tile (basic price Rs. 80/sft)Prefered



sqm 50 50 100 200.0 1886 377,232.00

iii Polished Vitrified tile (basic price Rs. 150/sft)Prefered

makes Kajaria world or equavalent with prior approval

of the of engineer in charge.

sqm 10 10 20 40.0 2700 108,000.00

9.00 Raised Floor

P/F false flooring comprising of 25mm diameter mild

steel stud shall be threaded, with a nut and check nut

6mm. Mild steel base plate placed at all junctions of

the panels approximately at 1.3. Center. Top head

attachment of the pedestals pressure die-cast

aluminum alloy class LM6. Stringers made of cold

rolled mild steel channels of size 40mm x 40mm x 3mm

placed over top head attachment of pedestals. The

stringers shall be zinc electroplated to a minimum

thickness of 15microns. Panels manufactured from steel

with lightweight cementious core in the size 600 X 600 X

35 mm.

Design Plus



DSR

item

code


Floors

RATE AMOUNT

The floor panels shall have Access Managers and

openings of sizes as per IT requirement. 2mm thick high

pressure decorative laminated sheet, anti-static fire-

retarted and abrasion resistant quality (flooring grade

formica, Durosurt of equivalent as approved of required

shade, fixed to the top of particle board floor panels

with adhesive of approved quality and machine

pressed includes cost of providing holes and openings.

3mm thick hard P.V.C beading, G.I. Sheet to the bottom

surface and sides of the floor panels and aluminum

cleats of size 20x20x2mm screwed to the bottom of floor

panels. Included in this item is cutting of holes/ openings

with special cutter to achieve a seam less edge and

also supply of vacuum pull. Height of false Floor is:

i 450mm( preferred make: UNITILE or equavalent with

prior approval of engineer incharge.) Sqm 25 25 25 75.04,500.00

337,500.00

ii 300mm( preferred make: UNITILE or equavalent with

prior approval of engineer incharge.) Sqm 15 15 15 45.04,200.00

189,000.00

10.00 Aluminium Skirting

Supply & Installation of proprietry Anodised Aluminium

Skirting of matt Natural finish of aluminium alloy 6063 T5

manufactured from recycled aluminium billets.

Anodizing shall be 10-15um (microns) depending on the

colour selected for of 50mm high skirting. The cover be

Grey PVC with PVC corner stakes for connecting the

skirting at corners & wall ends.( preferred make: JEB or

equavalent with prior approval of engineer incharge.)

RMT 100 100 500 700.0 543 379,750.00

11.00 Laminated Skirting

Providing and fixing laminated skirting(100 to 150mm

high) on wall and partitions and made of 1.0mm thick

laminate cladded over 12mm thick BWP ply fixed to

wall with wooden plugs including all necessary nails,

glues, wood preservative paint,etc. complete as per

design and drawing.

RMT 950 1000 5000 6950.0 326 2,262,225.00

12.00 Solid Wooden Flooring

Providing and fixing of 15mm solid hard wood flooring of

approved brand make, consisting total of 3 wood

layers. Top layer of precious wood in 3.6mm having 6

coats of Uvdried surface treatment, middle layer of

spruce/ pine wood finger chips ie, laid perpendicular to

the top layer and bottom layer of spruce veneer for

balancing and stability. Having width 250mm, length

2200mm with click - connect (glue-less) technology.

Fixing by providing 3mm of polyurethane foam & 0.5mm

of polythene sheet underneath the flooring.

sqm 25 50 75.0 5425.00 406,875.00

13.00 Laminated wooden flooring

Providing and laying laminated wooden flooring of

approved make ( sharper image) make and as per

approved sample, colour and laid on the existing

levelled flooring with approved adhesive & underlay

including skirting beading & profile etc. complete as per

manufacturers specification & approval of Architect

(basic rate to be considered @ Rs. 1700/- sft.).

sqm 50 50 100 200.0 2400 480,000.00

14.00 Antistatic Vinyl Flooring

Providing and laying in position 2mm thick antistatic

vinyl tile flooring of approved shade and quality to

floor with adhesives, including thermo welding of joints

etc. complete as per manufacturer's specifications.

Cost of levelling as required to be included in the

quoted rate.sqm 60 60 240 360.0 1200 432,000.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

15.00 P/P black or white round(nominal size:20-25mm)

polished river pebbles in floor recesses locations, so as

to achieve a uniform distribution in locations as per

design. KG 200 200 600 1000.0 200 200,000.00

16.00 Ceramic Tile Dado

Providing and laying 6 mm thick ceramic tiles of

approved quality and shade for dado over a bed of

12mm thick cement mortar 1:4 (icement : 4 coarse

sand) , laid to patterns without grooves , including

necessary cutting, mitring, grouting of joints applying

silicon sealents between the junction of floor & wall,

etc., complete as per detailed drawings at all levels.

i ceramic tile (basic price Rs. 40/sft) sqm 150 150 300 600.0 950 570,000.00

Total 91,444,814.00

2.0 PART B-FALSE CEILING WORKS

General: Under this subhead,all the seen surfaces shall

be measured and paid for.

2.10 Providing & fixing grid ceiling with high density / fire

resistant Mineral wool accoustical Ceiling tiles tegular

edge of 14mm thick and fine bevelled edge with NRC

not less than 0.65. The tile shall be of size 600 x 600

x14mm. The ceiling shall be suspended with suspension

system, using high quality galvanised steel frames

comprising of powder coated main runner, cross Tee's &

edge frames suspended from ceiling using high strength

anchor bolts for hanger hooks holding the frame.

Humidity resistance up to 90 %, relative humidity (90

RH) ,Reaction to Fire Class ”O”

Approved document B Building Regulations ,A2-s1,d0

EN 13501-1

1 hour fire protection to BS 476 part 23 ,Up to REI 90 EN

13501-2

Good acoustic absorption

Thickness 14 mm nom.

Light reflection approx. 88 (ISO 7724-2, ISO 7724-3)

Sound reduction* 30 dB

Coefficient of thermal conductivity should be 0,063

W/mK

Mineral wool should be derived from a mixture of sand,

recycled glass and limestone. This mineral wool product

should be completely harmless to health - and fulfils all

national and international regulations.

Only natural pigments should be used in the paint

coating of Acoustic tiles - a solvent-free dispersion type

paint should be used.

The suspension construction should consists of zinc

galvanized sheet steel. Visible sides are standard white

coated. Other colours on request. Weight (according to

system): approximately 1.5 to 3.0 kg/m²

Regulations for the entire weight-bearing building

component:

Soffit + suspended ceiling, fire resistance of 30 to 120

min. (F 30 to F 120 also REI 30 up to REI 120.)

Requirement for the suspended ceiling alone: Self

contained fire protection (from above and below) fire

resistance of 30 to 90 min. (EI 30 and F 30 to F 90).

Design Plus



DSR

item

code


Floors

RATE AMOUNT

Galvanized support system- and sillohoute grid system

consisting of main tee 3000mmx15mmx34mm &

perimeter angle- suitable to form a matrix of

600x600mm.Tee cap shall be bake enameled and of

12mm face width .These Tiles are in White Colour. Note:

Total area shall be taken under the Ceiling including

Lights and Diffusers shall be taken for

measurements.preferred Brand :OWA, ARMSTRONG or

equalvalent with prior approval of engineer in chief.

Sqm 2568 2450 11500 16518.0 868.00 14,337,624.00

2.20 Providing and fixing in position Suspended ceiling

System with microlook edge wood veneer finish ceiling

tiles in size 600 x 600 x 15 mm laid on Suprafine 15mm

Galvanised grid support system-consisting of main tee

3000mmx15mmx34mm 7 parimeter angle- suitable to

form a matrix of 600x600mm.Tee cap shall be bake

enamelled and of 15mm face width .Suggested Brand :

Armstrong, OWA , AMF microlook perforated A1, in

beech or maple as per approval or equv, & Suprafine

15mm grid. Note: Total area shall be taken under the

Ceiling including Lights and Diffusers shall be taken for

measurements.

Sqm 70 35 185 290.0 3255.00 943,950.00

2.30 Providing and fixing Veneered wooden lattice Ceiling

comprising of beams ( upto 50x150 size crossection) at

upto 300mm c/c made with 19mm th. Comm. board as

base and 4mm th. walnut veneered ply as the finishing

layer comlete with all edges having suitable lippings

etc. complete. The surface will be melamine polished

as/app.with grooves as/det.

Sqm 50 50 100 200.0 4000.00 800,000.00

2.40 Providing and fixing Veneered Ceiling comprising of

necessary framework of well seasoned Hard wood /

Board / MS box sections with 6mm th. Comm. Ply as

base and 4mm th. Steam Beech/AM maple veneered

ply as the finishing layer complete with all edges having

suitable lippings etc. complete. The surface will be

melamine polished as/app. with grooves as/det.

Provision for cove/surface lights will have to be kept

.This Ceiling will be in following two profiles :

I Flat profile Ceiling hanging below the main Tile Ceiling.

sqm. 25 125 150.0 3440.00 516,000.00

2.50 Providing and fixing 'SOLATON' Double Layer Ceiling

System , using existing Gyp board ceiling as first layer &

using 12 mm thk SOLATON Ceiling Board (SC-15-12T) as

second layer fixed to eac other with the help of

Adhesive & staples as per manufacturer's spec.

Suggested Brand: Solution from NITTOBO or equavalent

but with the prior approval of the engineer in charge of

the project.

sqm. 50 50 300 400.0 1500.00 600,000.00

2.60 Providing and fixing the 'Axiom' perimeter trim in

following sizes in white colour, baked polyester paint

finish, fixed to grid main runner with the help of Axiom

profile T-bar connector clip. The Axiom profile shall be

of extruded aluminium alloy 6063 and T-bar connector

clip from commercial aluminium complete as per

manufactutuer specifications and details and drawings.

Suggested Brand : Axiom Perimeter Trim from Armstrong.

i 100mm x 19mm Rmt 50 50 100 200.0 538 107,500.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

2.70 P/F Window Pelmets made out of 19mm Comm Board

in L- profile fixed to RCC slab with dash fasteners/

adequate hard wood framings . Cost to include

painting this with white flat paint. Average size : 200 x

450. Complete as per design and drawing.

Rmt 550 550 2150 3250.0 600.00 1,950,000.00

2.80 Providing and fixing Trap Door in false ceiling, made

of 12mm thick B.W.P. grade ply wood resting / fixed /

hinged on 12mm x 18mm size wood frame all round,

1.0mm thick laminate on exposed surfaces of ply wood,

enamel painting on unexposed surfaces, including all

hardware, hinges, wood lipping etc. complete as per

design and drawing.

sqm 60 60 180 300.0 2500.00 750,000.00

2.90 Providing and fixing 200 x 225 x 100mm (front height)

cove made of gypsum/ pop cove as per drawing in

for lighting cove complete with necessary cut-outs for

services out lets. Rm 500 600 3000 4100.0 300.00 1,230,000.00

Total 21,235,074.00

3.00 PART C- PARTITION & PANELING

General, and mandatory :-

1. The GI frame work in partition to have verticals as

required and as per Manuf.'s specs. And horizontals at

every 1200 mm c/c or as per the Pattern of grooves

whichever is less . Cost of partitions to include insertion

of necessary wooden members at skirting level or

elsewhere as deemed fit by him.

2. At all services out lets such as switch sockets, data

out lets,AC grills, etc. Horz. member of adequate size

and section to be provided.

3. All full ht. partitions ,unless otherwise specified will go

upto RCC slab,complete with insulation , Gyp. Board

etc. Actual Area executed will be paid for.

4. All exposed wooden surfaces in this Item or anywhere

else in the BOQ to have melamine polish as per

approved sample

5. All wooden/mdf framework under this item or

anywhere else in the BOQ to be treated with anti

termite and fire retardant paint ( viper or equv.)

6. All the wooden framework under this Item or

anywhere else in the BOQ will have well seasoned

wooden members of species as defined in the

individual item.

7. All Glass to Glass, Glass to wood and Glass to SS

joints shall be sealed with Dow Corning Glass sealent

with minimum contact surface to be not less than 6mm

after cleaning and masking procedure with full tool &

tackle .Silicon works to be got done by an approved

specialized Agency.

Design Plus



DSR

item

code


Floors

RATE AMOUNT

3.1

P/F G.I Frame for Partitions consisting of G.I vertical studs

of size 50mm & horizontal members where ever required

as per manufacturer,s specs, using Gypsteel sections,

hardwood will be inserted as may be required to fix

door frames skirtinf etc. Quote only for framework. All

components to be of saint gobin India Gypsum/ boral

Sqm 200.00 200.00 1,200.00 1600.0 434.00 694,400.00

3.2

P/F G.I Frame for Panelling consisting of G.I vertical

studs of size 75 mm & horizontal members where ever

required as per manufacturer,s specs, using Gypsteel

sections, hardwood will be inserted as may be required

to fix door frames skirting etc. Quote only for framework.

All components to be of saint gobin India Gypsum/

boral

sqm 950.00 990.00 2,400.00 4340.0 488.25 2,119,005.00

3.3

Providing and fixing kail wood frame in curved or

straight profile for partition work of section 50 mm x 50

mm with anti-termite and fire retardant paint. Sqm 100.00 100.00 300.00 500.0 596.75 298,375.00

3.4 Skins over partitions and penelling

Note :-

1) All grooves unless otherwise specified shall be 10mm

wide with laminate at the back.

2) The exposed edges of all Skin Types will be edge

bound with suitable laminate/veneer/wood etc. as per

Architects' directions.

3) All Gypsum boards shall have Al. angle / MDF

beading on the edges.

4) All Glass to Glass, Glass to metal/ wood joints shall

have Dow Corning silicon seal done by approved

Applicator as per manufacturer's Specs.

3.4.1

Providing and fixing 12mm thick MDF Board fixed over

GI Partition / kail wood frame with screws at 300mm

centre to centre or approved desh fastners as required,

jointed and finished so as to have a flush look which

includes filling and finishing with putty and two coats of

primer suitable to receive wall paper / paint etc.

complete as per design & drawing.

Sqm. 400.00 400.00 1,500.00 2300.0 967.50 2,225,250.00

3.4.2

Providing and fixing 6mm thick commercial ply fixed

over GI Partition / kail wood frame with screws at

300mm centre to centre or approved desh fastners as

required, jointed and finished so as to have a flush look

which includes filling and finishing with putty and two

coats of primer suitable to receive wall paper / paint

etc. complete as per design & drawing.

Sqm. 100.00 100.00 500.00 700.0 645.00 451,500.00

3.4.3

P/F Skin type of Gypsum board skin with 12mm grooves

complete with angle beadings & paper tape as/manuf.

Specs. . 12.5mm tapered edge gypsum plaster board

fixed to the channels (behind single layer of gypsum

board)with dry wall screws, jointed and finished with

requisite filler, paper tape, finisher and and primer

suitable for gypsum plaster boards. The outer skin shall

have 12mm grooves with aluminum 'L' angle bends

fixed to the thickness of board at the edges, neatly

finished. All components to be of India Gypsum.

Sqm. 1,600.00 1,500.00 5,500.00 8600.0 379.75 3,265,850.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

3.4.4

P/F Skin type of 8mm thick MDF Board Skin fixed in

straight or curved profile to the sub surface with 10mm

grooves. This layer should be make veneer/ dinoc film

base skin base. Sqm. 400.00 130.00 1,950.00 2480.0 645.00 1,599,600.00

3.4.5

P/F Skin type of 12 th MDF Board Skin fixed in straight or

curved profile to the sub surface with 10mm grooves.

This will duco painted in matt finish.

Sqm. 55.00 20.00 200.00 275.0 989.00 271,975.00

3.5 Veneer Paneling

I Providing and fixing 4.0 mm thick wood veneer of

approved quality in panelling pasted over 9mm thick

commercial ply and fixed on GI frame work of partitions

(GI frame work payable separately) including providing

and fixing all around White Oak wood moulding of

required size, grooves, melamine polishing, making

grooves etc. complete as per design and drawing

.

Sqm 25 100 125.0 2,902.50 362,812.50

II Providing and fixing panelling on brick wall with

approved 4.0mm thick wood veneer having 9 mm

thick commercial ply backing with internal soft wood

frame of adequate and approved section and size

placed at 600 mm centre to centre bothways, treated

with antitermite and fire retardent paint including

grooves,melamine polished etc. complete as per

design and drawing.

Sqm 50 100 150.0 3,225.00 483,750.00

3.6 Laminate Panelling

i Providing and fixing 1.0 mm thick laminate of

approved quality in panelling pasted over 3mm thick

commercial ply pasted over 9mm thick commercial ply

and fixed on GI frame work of partitions (GI frame work

payable separately) including providing and fixing all

around melamine polished OAK wood moulding of

required size, grooves, complete as per design and

drawing .

sqm 200 200 800 1200.0 2,042.50 2,451,000.00

ii Laminated Band.

Providing and fixing laminated band made of 12mm

thick BWP ply cladded with 1.0mm thick laminate of

approved shade with 12mm x 12mm deep groove

finished with laminate fixed to wall / wooden / GI

Partition including necessary nails & screws / wooden

plugs, glues, insulation wherever required, melamine

polished, wood preservative paint etc. complete as per

design and drawing.150mm high

RMT 30 30 200 260.0 268.75 69,875.00

iii Providing and fixing panelling on brick wall with

approved 1.0 mm thick laminate of approved quality in

panelling pasted over 3mm thick commercial ply

pasted over 9mm thick commercial ply with internal soft

wood frame of adequate and approved section and

size placed at 600 mm centre to centre bothways

treated with antitermite and fire retardent paint

including grooves, white Oak wood moulding etc.

complete as per design and drawing.

sqm 400 400 2000 2800.0 2,257.50 6,321,000.00

iv Extra over item 3.9 (i), (ii), ( iii). for providing and making

10mm x 10 mm steel laminate grooves in panelling as

per approved design & drawing. Sqm 50 300 350.0 450 157,500.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

3.7

P/F Skin type - Fabric Covered Pin Board made with

12mm thick Sitatex Pin board covered with Fabric. This

skin will be attached to the partition .The Fabric range

will be of with basic rate of being Rs300/- per mtr.

Suggested brand: Response/ Atmosphere

Sqm. 50.00 50.00 200.00 300.0 1,612.50 483,750.00

3.8

P/F 12mm thk untoughened glass fixed with SS U

channel at bottom of floor and inside the ceiling as per

manufacturers specification all complete as per design

and drawing Sqm. 10.00 10.00 100.00 120.0 2,687.50 322,500.00

3.9

P/F 10mm thk toughened glass panels fixed with SS U

channel at bottom of floor and inside the ceiling as per

manufacturers specification all complete as per design

and drawing Sqm. 10.00 10.00 100.00 120.0 3,225.00 387,000.00

3.10

P/F Glass Writing Board made of Untoughened 12 thk

glass panel with 3M opaque white film from rear for

writing board fixed to the partition with 25mm dia SS

studs .Cost to include the necessary wooden members

required in the GI Framework to fix this Glass Writing

Board. Sqm. 10.00 10.00 100.00 120.0 3,225.00 387,000.00

3.11

Providing & fixing Modular Ceiling/Wall Cladding

System 'Topakustic' from Fantoni, over existing

gypsum/wall substrate/hanging from ceiling as per

pattern, drawings and architect's approval. The panels

being made of grooved MDF slat with low

formaldehyde content E1. Application of black sound

absorbent felt on the rear of slats, thickness 0.25 mm -

weigh 65 gr/m2. The installation has to be made with an

under supporting structure, composed by an „omega‟

steel profile, sizes mm 18 x 27 and the proper steel

locking clips of mm 44 x 38. The rate to include cost of

necessary Grid & support system like end profiles, fixing

channels, clips, complete, which are necessary for

installation. The rate to include cost of transportation,

shifting & fixing charges. preferred Brand :Fantoni or


Walls Sqm. 50.00 25.00 200.00 275.0 9,000.00 2,475,000.00

Ceilling Sqm. 25.00 25.00 50.00 100.0 10,000.00 1,000,000.00

3.12

P/F film on glass panels as per pattern / design ( this can

be in a combination of opaque coloured and frosted

films as/ design) preferred Brand :Fasarra from 3M or


translucent film approved Design Sqm. 320.00 300.00 1,500.00 2120.0 2,500.00 5,300,000.00

opaque white filim Sqm. 25.00 25.00 100.00 150.0 2,000.00 300,000.00

3.13

P/F film on glass panels as per pattern / design ( this can

be in a combination of opaque coloured and frosted

films as/ design) preferred Brand :frosted film 3M or


Sqm. 25.00 50.00 100.00 175.0 1,600.00 280,000.00

3.14

P/F printed graphics film for pasting directly on

walls/partitions. Cost to include the nominal designing

charges preferred Brand :3M Controltac™ Plus Graphic

Film with Comply™ : IJ180C-10 or equalvalent with prior

approval of engineer in chief.

Sqm. 60.00 40.00 200.00 300.0 3,500.00 1,050,000.00

3.15

P/F Vinyl wall papers pasted with appr. Adhesive

solution without any bubbles or unevenness over

wall/partitions as /design. Suggested brand: Vescom/

Arte or equalvalent with prior approval of engineer in

chief.(Basic rate:upto 100/= per sq ft)

Sqm. 200.00 200.00 1,000.00 1400.0 1,519.00 2,126,600.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

3.16

Providing and placing 50 mm thick glass wool insulation

of 48 kg/ cum. density neatly packed in 800 micron

black colour polythene bags of various sizes and

shapes,bags shall be fully stitched all round with25 mm

double leaf fold, sealing the rock wool fibre fully. The

bags to be stuffed in the cavities of Gyp. partitions from

floor up to RCC slab above, cross stitched from one side

with GI frame work of partition by 24 g GI wire to keep

bags in possession. Suggested Brand : Rocklloyd or


sqm 1,000.00 1,000.00 3,500.00 5500.0 325.50 1,790,250.00

3.17

P/F glass panelling consisting of 6mm thk untoughen

glass panel,( paint back) & 50x25 mm box section fixed

to the sub surface with dash fasteners, cost include

application of white silicon to be used to fill gaps and

sticking of glass to box section with norton tape. Glass to

glass edges to be grinded and polished to achieve a

seamless finish. Suggested Brand : Saint Gobain SGG

Planilaque Evolution or equalvalent with prior approval

of engineer in chief.

Extra White & Ivory sqm 20.00 20.00 100.00 140.0 3,146.50 440,510.00

Solar Yellow sqm 10.00 10.00 40.00 60.0 3,146.50 188,790.00

3.18P/F Mirror panelling , 5mm thk in same specs as above

item. sqm 6.00 4.00 10.00 20.0 2,604.00 52,080.00

3.19

Supply & Installation of Solid Modular partition 100mm

thick.100mm De-mountable Partition System that is

designed to provide office space in an open plan

environment and the ability to modify or reconfigure this

space to meet changing office requirements.

System description

System to be fully bi-block system made of galvanised

steel and aluminium components, with a flush pencil-

joint or 5mm groove connection between the modules.

The system is for interior wall applications and it is fully

de-mountable and re-locatable. All visible components

are finished with high quality polyester epoxy powder

coating, smooth or “soft touch” textured within RAL

colour collection. Being a Bi-block system String

provides the accessibility for power, communication

and data wiring services even after the installation.

String partition is 100mm thick, non- load bearing, the

modules are full height elements. Standardised modules

of steel panels, wooden panels, glazed panels and

door units can be arranged in almost any desirable

combination within given wall space.

Ceiling track: U-channel profile of 1.5mm thick

galvanised steel, recessed 13.5mm behind face of

panel. Ceiling track is visible and it is coated with epoxy

powder. It is 13mm adjustable to variation of ceiling

level and provided with dual compression seals for

continuous light and sound seal.

Floor track; U-channel profile of 1.5mm thick galvanised

steel, recessed 23mm behind face of panel. Floor track

is visible and it is coated with epoxy powder. It is used in

combination with an adjustable floor track, which will

be not visible. This adjustable floor track will level the

system and provide 13mm adjustment in the height. The

floor track is provided with dual compression seals for

continuous light and sound seal.

Design Plus



DSR

item

code


Floors

RATE AMOUNT

Construction: Galvanised clamping studs for solid

module connections and unique (patented) twist

connectors for frame-frame and solid-frame

connections

Insulation material: 50 mm thick Rock wool with a

density of 48kg/m3 shall be placed in the cavity of the

solid modules during installation.

Sound insulation: Following units have been tested by

an approved independent testing laboratory in

accordance with ISO 717, leading to following results:

up to Rw 47dB for solid steel modules, up to 42 dB for

solid wood modules & up to Rw 42 dB for glazed

modules.

Fire resistance: The solid modules have been tested by

an approved independent testing laboratory in

accordance with Clause 5 of BS 476 part 22, leading to

following results:

Standard up to 30minutes in Steel panels & wooden

chipboard panels with melamine finish

Integrity up to 70 minutes in Steel panels

Insulation up to 63 minutes in Steel panels

Suggested Brand : MAARS or equalvalent with prior


FINISH

a

On both sides with factory assembled wooden panels

18mm thick with Ash Wood Wall Nut Laminate/Wall

paper Finish. Max. dimensions 1200mm width by

2400mm height. sqmt 500.00 500.00 4,500.00 5500.0 8,410.00 46,255,000.00

b

On both sides with factory assembled wooden panels

18mm thick with Veneer Finish. Max. dimensions

1200mm width by 2400mm height. sqmt 80.00 500.00 580.0 9,000.00 5,220,000.00

3.20

Providing and fixing wooden cill / jamb made of 4mm

thick White Oak wood veneer/1.0mm thick laminate

cladded on 19mm thick BWP ply fixed to wall with

necessary nails/wooden plugs including all nails White

Oak wood wood lipping, melamine polishing, wood

preservative paint, White Oak wood architrave on both

faces etc. complete as per design and drawing.

i Laminated sqm 25 25 125 175.0 2170 379,750.00

ii Veneered sqm 5 5 10 20.0 3472 69,440.00

Total 89,279,562.50

4.00 PART D-DOORS AND WINDOWS.

4.10 Door Frame

Providing, making and fixing in position selected woods

in frames, transoms, mullions, cills, etc., of doors,

windows, made to size and shape as shown, with

mitered joints, fixed with holdfasts/cleats / threaded

expansion bolts to rough grounds / masonry including

making 10mm thick grooves with laminate finished etc.

including two coats of fire retardant (viper) & anti-

termite paint on concealed surfaces, rebates for locks,

hinges, metalic fasteners,CC for hold fasts, melamine

polishing etc., complete as per detailed drawings.

i First class kiln dried Melamine polished White Oak. cum 1 1 2 4.0 86800 347,200.00

ii First class hollock wood synthatic enamel paint. cum 1 1 2 4.0 54250 217,000.00

4.20 Architrave

Providing and fixing Ist class White Oak wood

architrave of size 50mm x 20mm and fixed with nails /

wooden plugs including nails, screws, melamine

polishing,fire retardant (viper) & anti-termite paint on

concealed surfaces, etc. complete as per design and

drawing.mtr. 500 500 2000 3000.0 271 813,750.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

4.30 Flush Door Shutters

Design Plus



DSR

item

code


Floors

RATE AMOUNT

Providing and fixing 35mm thick (shutter thickness

excluding laminate / veneer ) both side commercial

type flush door shutters (decorative type) core of block

board construction and frame of 1st class hardwood

phenol bonded, White Oak wood lipping 12mm thick

on all edges of shutters including brushed steel

heavy duty 125mm hinges (4 nos.), PVC buffers, door

stopers, melamine polishing to required shade where

required etc. all complete as per design and drawing.

I Both side laminated with 1.0mm thick laminate. (FD-

1,2,3,4) sqm 60 60 360 480.0 3255 1,562,400.00

III One side veneered with 4.0mm thick White Oak wood

veneer and other side laminated with 1.0mm thick

laminate. sqm 15 8 55 78.0 3798 296,205.00

IV Both side veneered with 4.0mm thick White Oak wood

veneer. (FD-2A) sqm 20 10 60 90.0 4340 390,600.00

4.40 Vision Panel

Providing and fixing vision panel on flush door shutter

including cutting of shutter, 6mm thick glass, White Oak

wood beading from both faces, melamine polishing etc


sqm 5 5 25 35.0 2007 70,253.75

4.50 Fixed Glazing

WIDELINE MODULAR ALUMINIUM PARTITION SYSTEMS

(105x25mm)

i Supply & Installation of proprietry Anodised Aluminium

partition systems of matt Natural finish of aluminium

alloy 6063 T5 manufactured from recycled aluminium

billets. Anodizing shall be 10-15um (microns) depending

on the colour selected of 105 x 25mm thk section on all

four sides for the partition using as Horizontals on top &

as verticals , as Horizontals at bottom with snap on

option for installing glass and other required

accessories.The partition should be available for

use with a partition using a 51 mm or 64 mm stud frame

.Comprised of 105 mm x 25 mm framework, the system

should produce a selection of complete

prefinished door frames as well as glass and door

opening reveals, 5 mm architraves for termination of

adjacent skirting and can accept glass of 10mm

thick.From FFL to +2400mm THE RATE TO INCLUDE THE

COST OF 10MM TOUGHENED GLASS. Suggested Brand :

JEB , ALLOY Systems or equalvalent with prior approval

of engineer in chief.

Sqm 500 500 2200 3200.0 6510 20,832,000.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

ii Item same as above 4.5(i) of fixed glazing but for using

hard wood frame above falseceiling for fixing glass on

top & aluminum channel in floor instead of providing

Oak wood frame including silicon sealent, hard wood

beeding on top, nails, glues etc. complete as shown in

the drawing. Sqm 50 50 100 200.0 4340 868,000.00

4.60 105x25 mm WIDELINE MODULAR ALUMINIUM DOOR

FRAME FOR SOLID SHUTTER NOS 52 58 320 430.0 20000 8,600,000.00


door frame of matt Natural finish of aluminium alloy

6063 T5 manufactured from recycled aluminium billets.

Anodizing be 10-15um (microns)for door frame using

(105 x 25mm) sections with required accessories.From

FFL to +2400mm

-

-

4.7(A) SINGLE LEAF HOLLOW CORE DOOR FOR CCIT & CITNOS 14 4 64 82.0 40,000.00 3,280,000.00

Construction: 48mm thk Hallow core Door Shutter with

veneer/ DINOC finish on both sides. -

Hardware : -

Hinges :SS ball bearing Butt hinges -

Handle:Dorma TH 123 Tubular Handle -

Dorma make mortise latch lock - Dorma Premier 711

with key opening on one side & thumb turn on the other.

-

Door Closer: Concealed type DORMA ITS 96 2-4/

equivalent

Door Stopper : Floor mounted door Stopper -

Suggested Brand : JEB , ALLOY Systems or equalvalent

with prior approval of engineer in chief.

-

4.7(B) 75x45mm MODULAR ALUMINIUM STILE DOOR SHUTTERS

FOR ITO's, JCIT's,ACIT's,DGIT's etc NOS 38 54 256 348.0 48,825.00 16,991,100.00


door Stiles of matt Natural finish of aluminium alloy

6063 T5 manufactured from recycled aluminium billets.

Anodizing shall be 10-15um (microns) for door shutter

using 75 x 45mm section for the hinge and the lock stiles

with the top & bottom stiles with joinery sections for

connecting the stiles together

Hardware : DORMA/Equivalent

Hinges : 4 nos Aluminium Wide Leaf Hinges

Handle:Dorma TH 123 Tubular Handle

Dorma make mortise latch lock - Dorma Premier LX 888

with key opening on one side & thumb turn on the other.

Door Closer: Exposed door closer TS 73V & hold open

arm

Design Plus



DSR

item

code


Floors

RATE AMOUNT

Door Stopper : Floor mounted door Stopper

Suggested Brand : JEB , ALLOY Systems or equalvalent

with prior approval of engineer in chief.

4.80 Louvered Shutter

Providing and fixing 40mm thick louvered shutter made

of 50mm x 30mm thick White Oak wood louvers fixed to

100mm x 40mm White Oak wood stiles @ 50mm c/c,

including nails, screws, brushed steel hinges, brushed

steel plate for magnetic catcher & locking

arrangement, melamine polishing, White Oak wood

frame fixed to wall with hold fasts etc. complete as per

design and drawing.

sqm 35 35 120 190.0 7000 1,330,000.00

4.90 Frameless Glassed Door Shutters.

a) Providing and fixing frameless glass swing door made

of 12mm thick clear float glass (toughened) with patch

fitting of DORMA/GEZE make etc. complete as per

design and drawing.( all fitting shall be paid in item no

4.9 a)sqm 50 50 300 400.0 3500 1,400,000.00

b) Providing and fixing following stainless steel hardwares

for frameless door shutter - all of 'approved make

inclding cutting and making good the floor etc

complete.

i) Top pivot each 12 12 75 99.0 1953 193,347.00

ii) Bottom patch each 12 12 75 99.0 2604 257,796.00

iii) Upper Patch each 12 12 75 99.0 2604 257,796.00

iv) Floor Lock each 12 12 75 99.0 1953 193,347.00

v) Strike plate each 12 12 75 99.0 1953 193,347.00

vi) Door Handles pair Set 12 12 75 99.0 3798 375,952.50

4.10 Glass Block

Providing and laying glass block (imported) wall

(straight and curved) using white cement mortar,

reinforcement, spacers, anchores, silicon sealant, etc.

complete as per manufacturers specifications. Size of

the block 190mm x 190mm x 75mm thick.

sqm 10 10 20 40.0 5000 200,000.00

4.11 Hydraulic Door Closer

Providing & fixing hydraulic door closer exposed type

as per approved sample of approved make, (basic

rate - Rs. 3000 / each)Suggested Brand :Heetich, geze,

dorma or equalvalent with prior approval of engineer in

chief.each 12 12 50 74.0 4557 337,218.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

4.12 Handles & Lock

i Providing & fixing Entrance door handle of approved

Make, in brushed steel finish etc complete as per

design & drawing & manufacturer

specifications.Suggested Brand :Heetich, geze, dorma

or equalvalent with prior approval of engineer in chief.

Set 12 12 90 114.0 5425 618,450.00

ii Providing & fixing wooden door handle 1) Tubular Lever

handle2) Sash Lock with 55mm back set, 20mm forend,

CTC 72mm & 20 SS Strike Plate3) Euro Profile Cylinder

with both side key of length 60mmof approved to

include Make in brushed steel finish etc complete as

per design & drawing & manufacturer

specifications.Suggested Brand :Heetich, geze, dorma

or equalvalent with prior approval of engineer in chief.

each 30 30 100 160.0 3038 486,080.00

iii Providing & fixing dead lock with strike plate of

approved make in wooden door shutters. Suggested

Brand :Heetich, geze, dorma or equalvalent with prior


each 5 5 5 15.0 2170 32,550.00

4.13 Floor Spring

Providing and fixing in position standard double acting

heavy duty floor spring with top pivite to door. Floor

spring with 90deg hold open (EN 4), Width of door :max

1100 mm,Weight of door : 100 kgs,Finish : SSS, Adjustable

sweep speed & closing speedincluding 3mm thick

brushed steel top cover plate with brass screws

complete Suggested Brand : DORMA, GEZE, heetich or


each 12 12 75 99.0 8500 841,500.00

4.14 P/F Fire door with fire-resistant paint treated wooden

frame, 100x50 and 50 mm thick fire resistant flush door

shutter of solid core of inorganic vermiculite bonded

board with a bulk density of 400 kg/M3 with sheet metal

reinforcement at hinge lock and closer location with

120 minutes fire rating conforming to B.S 476 (Part 20

and Part 22) and I.S. 3614 Part of , with heat activated

inluminesent fire seal strips (imported from UK or

equivalent) of size 10mmx3mm on all sides of the shutter

except bottom provided in suitable grooves with

stainless steel ball bearing butt hinges (100 mm x 76

mm x 2 mm) with necessary screws including 1.5 mm

thick fire retardant laminate on inside and veneer

panelling 4mm thk , inside and appropriate fireproof

iron mongery , (suggested brand:E-CORE or PACIFIC )

Rate to include providing & fixing SS finished double

legged foot operated door stays,1.5mm door silencer

beading fixed to frames, Polyvinyl door stopper fixed to

skirting, SS finish tubular handle & mortise lock of

approved make and pressed steel door frame as per

manufacturer's specification all complete as shown on

drawing and as directed. The door shutter shall also

have a panel 6mm thk, 125x1000mm 120 minutes fire

rated glass, surrounded with fireproof treated oak wood

beading, all around. (suggested brand for glass:

Pilkington PYROSHIELD). The door will have a fire rated

Door Closer.

Sqm 4.00 4.00 12.00 20.0 16000 320,000.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

4.15

Providing and fixing E C Drive automatic sliding door

system with compact section TUV approval and

extremely quiet running gear consisting of bi parting

sliding (sensor) door operator modular design including

internal cover with operator dimension (HXTXL)

100x180x5000mm of GEZE Make ( GEZE EC Drive ) or

equivalent as per manufactures Design ,Drawing &

Specifications‟ , inclusive of Glass handing profile,

control panel main profile ,cover profile including wiring

& all electrical works.

a) The track profile should be separate from main

profile enabling reduction in vibration insulation

microprocessor control, self –learning reversing when

obstruction is encountered.

b) Microprocessor controlled, control unit –it should be

self learning and adjustable parameters for opening

and closing speed, hold –open time and opening and

close force.

CLEAR OPENING 2000X2400MM. Providing and installin

the 12mm glass also required for the door each 1 1 2 4.0 220000 880,000.00

Total 62,185,892.25

Design Plus



DSR

item

code


Floors

RATE AMOUNT

5.00 PART E-CABINET WORKS

General : All Pre-laminated board specified in this Item

or anywhere else in this BOQ shall be MDF Board .

5.10

P/F Ceiling high storage cabinets 450 deep in 19mm

thk. both sides pre-lam ply construction with 6mm thk.

pre-lam. Ply backing. The horizontal and vertical

divisions shall be as per the drawing/details. All the

visible surfaces - exposed & inside shall be in lam finish

as per approval . All edges will have edge binding

tape/laminate of matching colour. All the shutters TO

BE MADE OF PLY WOODshall have auto-closing hinges

and laminate/edge binding on the edges. All shutters

shall have superior quality locks and shall have tubular

handles 150/200 long in brushed steel finish as per

approval.

Sqm. 300.00 450.00 2500.00 3250.0 5975.00 19,418,750.00

5.20

P/F low ht. storage 750/1050/1300 high about 450 deep

in 19mm thk. both sides prelam Board construction with

6mm thk. pre-lam. Ply backing. The horizontal and

vertical divisions shall be as per the drawing/details. All

the visible surfaces - exposed & inside shall be in pre-

lam finish as per approval .All edges will have edge

binding tape/laminate of matching colour. All the

shutters shall have autoclosing hinges and

laminate/edge binding on the edges. All shutters shall

have superior quality locks and shall have tubular

handles 150/200 long in brushed steel finish as per

approval. This will have 25 th. post-formed laminated

MDF top. It is recommended to use factory made

cabinets to be assembled at site and fixed. all

hardware would be as per approved makes.

Sqm. 60.00 60.00 200.00 320.0 5800.00 1,856,000.00

5.30

P/F Low ht. Storage same specs as 5.2 above , but with

600 depth. This will have a laminated usable top made

in curvilinear shape with edge binding or straight shape

with post formed tops. Sqm. 20.00 20.00 60.00 100.0 6000.00 600,000.00

5.40P/F Overhead storage 400 deep in same specs. As item

no. 5.1 above. Sqm. 18.00 18.00 64.00 100.0 5500.00 550,000.00

5.50

P/F low ht. under counter storage unit for Pantry 600

deep in 19mm thk. BWP commercial Board

construction. The horizontal and vertical divisions shall

be as per the drawing/details. All the visible surfaces -

exposed & inside shall be in pre-lam finish as per

approval . All edges will have edge binding

tape/laminate of matching colour. All the shutters shall

have auto-closing hinges and laminate/edge binding

on the edges. All shutters shall have superior quality

locks and shall have tubular handles 150/200 long in

brushed steel finish as per approval.

Sqm. 20.00 20.00 80.00 120.0 3000.00 360,000.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

5.60

P/F PERSONAL LOCKER UNIT( PLU) prime quality CRCA

steel of multi bend construction fastener free, knock

down construction w/Aesthetic punched design door

for better ventilation, Special ergonomically designed

plastic handles, Label holder for easy identification,

Stands are available to facilitate cleaning of work area,

Aesthetic leveling screws for alignment.10 lever cam

individual locks.w/easy convertibility, i.e. 2 doors to 4

doors vice versa. Anti corrosion treated components

and oven-baked powder coating process. a) Top,

bottom, LH & RH sides, Door and back material

thickness = 0.8mm ( 0.63FOR EXPORT)b) Door with 10

lever cam lock with individual locks, in a multi-unit

configuration as/ dwg.Size: 380 x 450 x 1830

No.s 15.00 15.00 40.00 70.0 7250.00 507,500.00

5.70

P/P Working Counter 600 wide with 25 th post formed

Laminated Top and fixed under counter Laminated

pedestal comprising one pencil drawer, one 5" drawer

and one Filing drawer constructed with pre-lam board.

One U/C pedestal @ every 1200 running length.sqm 20.00 20.00 50.00 90.0 7500.00 675,000.00

5.80P/f slotted Angle Racks in MS sections and framework as

aper approval. Size 2100 x 900 x 400mm depthnos 100.00 100.00 500.00 700.0 3000.00 2,100,000.00

5.90 Providing and fixing storage cabinet made of 19mm

thick comm. board on top, bottom, sides, partitions,

shelves, shutters,12 mm thick commercial ply for sides,

6mm thick commercial ply at back of cabinet, 4.0mm

thick veneer / 1.0 mm thick laminate on shutters &

exposed sides and top of cabinets wherever required,

balancing laminate on back surface of shutters and

enamel painting on unexposed inner faces, including

White Oak wood lipping/ matching PVC edge lipping,

melamine polishing, hinges, ball catchers, tower bolts,

handles/knobs, multi purpose locks,sliding chanel, etc.

complete as per design and drawing.All hardware to

be hettich.

I) Veneered

a) 450mm deep sqm 10 10 50 70.0 8000.00 560,000.00

5.10 Janitor Closet

Providing & fixing JANITOR CLOSET 450mm deep

comprising of carcass and shutters constructed from

20mm thick. comm. board finished in 1mm thick.

laminate.val, balancing laminate inside , 6x20mm

melamine polished BW lipping .Rate should be

inclusive of necessary Hardware- SS d-shaped cabinet

handles 100mm long, Lock sets, self-closing hinges,

latch inside, all cabinet hardware to be of approved

make & as/Architects approval. Refer drg No

sqm 20 20 100 140.0 3000.00 420,000.00

Design Plus



DSR

item

code


Floors

RATE AMOUNT

5.11 ELECTRICAL D.B. CUPBOARD

Providing & fixing 600mm deep cupboard for D.B.

panel cabinets comprising shutters constructed from

20mm thick. comm. board finished in 1mm thick.

laminate.val, comprising of carcass constructed from

19 mm thick. Bison Board all inside , 6x20mm melamine

polished Oak Wood lipping & 12x50 melamine polished

Oak Wood trims. Provide 150x300 powder-coated

aluminum louvered grilles on each shutter, requisite

cutouts for ventilation above and servicing trap door

below. Rate should be inclusive of necessary Hardware-

SS d-shaped cabinet handles 100mm long, Lock sets,

self-closing hinges, spring loaded shutter latch inside, all

cabinet hardware to be of approved make &

as/Architects approval.

SQM 75 75 200 350.0 3500.00 1,225,000.00

5.12 Compactors

Storage units of required size 1980 H * 915 W * 381 D

having 5 loading level. The shelves will be adjustable at

a pitch of approximately 25 mm. With suitable system.

The overall height of standard module is 2080 mm from

the bottom of the undrecarriage to to the top of

module. These modules are fabricated in the factory

with knock down construction covered from alla the

sides. The sheet used in CRCA confirming to IS:513

Grade D with thickness 0.8 mm for the vertical back,

side walls, top cover & horizontal shelves of bodies. The

sides/shelves shall be made from steel sheets

conforming to relevant codes. The construction of units

shall be such that protection from dust by suitable

overlaping of shttes for the overall size of the body is 2

mm. The bodies should be complete knock down type

and UDL for each shelf should be 40 kg. Bodies are

fixed/movable are bolted to undercarriage is allowed

on site. Bodies are fixed/movable are bolted to

undercarriage made up of 3 mm rolls onto channels/rail

consists of J section 2 mm thk HR steel & 25 mm are

embedded to the levelled ground.

providing 2 row of compactors 10 nos of cabinets

moving on rail fixed to the floor. nos 6 12 70 88.0 270000.00 23,760,000.00

5.13 Glass Shelves

Providing and fixing 12 mm thick glass shelves in nitche

supported with approved S.S. brackets as per design

and drawing.(glass area shall be mesured for payment)

Sqm 10 10 45 65.0 3007.00 195,455.00

5.14 Fixed Work Counter of Varying Sizes

Providing and fixing in position fixed work counter of

varying sizes and made of 19mm thick prelaminated

board table top( post formed) & on vertical side,

drawer front, 12mm thick commercial at drawer sides &

back, 6mm thick commercial ply at bottom,1.0mm thick

laminate on all exposed faces, PVC edge lipping on

edges, laminate on unexposed faces & on inside faces

of drawers & key board trays, including all glues, nails,

sliding channel, bracket for support fixed to portition,

hinges, knobs, multipurpose locks, wire manager etc.


staff table counter 600-750mm wide including key

board, drawer & cabinet below the counter and

cabinet for CPU. ( plan area shall be measured for

payment) Sqm 20 20 100 140.0 8137.50 1,139,250.00

5.15 Low Height Partition

Design Plus


1360 price schedule (vol.-v) part1

Documents