14848d1331864301 sc819 mpc2551 cant update firmware d104 firmware history

FIRMWARE HISTORY

03/07/2012

Copyright © 2012 RICOH Americas Corporation. All rights reserved. of 28

PRODUCT CODE: D104/D106

APPLICABLE MODEL: GESTETNER - MP C2051/MP C2551 LANIER - LD620C/LD625C RICOH - AFICIO MP C2051/MP C2551 SAVIN - C9120/C9125 GENERAL: The latest firmware version can be downloaded at either the Technology Solutions Resource Center web site at http://www.tsrc.ricoh-usa.com or FSD/DSD. Please obtain the latest firmware from the appropriate location as needed and be sure to check the README file for important notes and explanations. Revised items appear in bold typeface.

TABLE OF CONTENTS: 1. ENGINE FIRMWARE ver. 1.09:03: ...................................................... 2 2. SYSTEM/COPY FIRMWARE ver. 2.03: ............................................... 4 3. PRINTER FIRMWARE ver. 1.01.1e: .................................................... 6 4. FAX FIRMWARE ver. 02.00.00: ........................................................... 7 5. GWFCU3-22(WW)(FCU) FIRMWARE ver. 01.00.00: ........................... 8 6. MEDIAPRINT FIRMWARE ver. 1.00.01: .............................................. 9 7. NETWORK DOCBOX FIRMWARE ver. 1.04: ...................................... 10 8. NETWORK SUPPORT FIRMWARE ver. 10.61: ................................ 11 9. POWER SAVING SYS FIRMWARE ver. F.17: ................................... 13 10. REMOTE FAX (RFAX) FIRMWARE ver. 03.00.00: .......................... 14 11. SCANNER FIRMWARE ver. 01.07: ................................................. 15 12. WEB SUPPORT FIRMWARE ver. 1.01:........................................... 16 13. WEB UAPL FIRMWARE ver. 1.03: .................................................. 17 14. PDF FIRMWARE ver. 1.01:.............................................................. 18 15. PS/PDF FIRMWARE ver. 1.01: ........................................................ 19 16. RPCS FIRMWARE ver. 3.10.17: ...................................................... 20 17. LANGUAGE INSTALL FIRMWARE ver. 1.02: .................................. 21 18. PCL FIRMWARE ver. 1.03: .............................................................. 22 19. OPEPANEL.EXP (LCDC) FIRMWARE ver. 1.02: ............................... 23 20. JAVA VM V7 STD UPDATE TOOL FIRMWARE ver. 7.16.07: ......... 24 21. JAVA VM V7 FOR eDC FIRMWARE ver. 7.16.07: ........................... 25 22. OPTION IPDS FIRMWARE ver. 7.073: ............................................ 26 23. APP2ME FIRMWARE ver. 1.5.700: ................................................... 27 24. FINISHER1 FIRMWARE ver. 0.41:10 .............................................. 28

http://www.tsrc.ricoh-usa.com/

Firmware History for D104/D106

of 28

1. ENGINE FIRMWARE ver. 1.09:03:

VERSION PART NUMBER PRODUCTION DATE

1.06:03 D1055501A 1st Mass Production1.07:03 D1055501B February 2011 Production 1.08:03 D1055501C April 2011 Production 1.09:03 D1055501D November 2011 Production

1.1 ENGINE FIRMWARE HISTORY:

ENGINE FIRMWARE FIRMWARE VERSION

Initial Production Release 1.06:03 Corrects the following:

• If paper end occurs toward the end of a job, the machine may begin printing the next job first when the paper is reloaded.

• If a jam occurs while the machine is printing out a large number of staple jobs, the set of sheets in question is not stapled.

Other changes:

• The print speed is maintained (not reduced) when printing onto envelopes and small paper sizes set for Thick 1 and fed from the Envelope Feeder Option.

NOTE: This change does not affect A6T or A5T sized paper.

1.07:03

Corrects the following:

• If the Paper End condition occurs while printing out a duplex Copier, Printer, or FAX document, one of the pages is missing when the job resumes.

NOTE: The page that is deleted will depend on the exact timing of the Paper End condition.

1.08:03

…continued


of 28

ENGINE FIRMWARE FIRMWARE VERSION


• Jam 253 sometimes occurs in the internal finisher.

• The PM counters for the BK development unit (SP7-803-035/065, SP7-951-035) may increment higher than the actual number of sheets if the machine prints more than one minute without stopping.

• Productivity may drop under the following conditions:

- Duplex printing with A4 SEF or LT SEF

- Continuous printing with subtraction (reverse counter) based charging.

Other changes:

• The default values of the SP modes listed below were changed as follows, in order to further improve TEC (typical electricity consumption) performance.

SP1-951-001: 0->60 SP1-951-002: 0->60 SP1-951-003: 0->60 SP1-951-004: 0->60 SP1-951-005: 0->60 SP1-951-006: 0->60 SP1-951-007: 0->60 SP1-951-008: 0->60 SP1-952-001: 0->13

1.09:03


of 28

2. SYSTEM/COPY FIRMWARE ver. 2.03:


1.00.2 D1055730B 1st Mass Production1.01 D1055730C March 2011 Production 1.02 D1055730D April 2011 Production 2.00 D1055730E May 2011 Production 2.01 D1055730F June 2011 Production 2.02 D1055730G October 2011 Production 2.03 D1055730H December 2011 Production

2.1 SYSTEM/COPY FIRMWARE HISTORY:

SYSTEM/COPY FIRMWARE FIRMWARE VERSION

Initial Production Release 1.00.2 Corrects the following:

• SC819 occurs when the machine is rebooted after an application is installed via the MFP management server (XG-IM).

• SC997 may occur when previewing a scanned image.

• The pressing of a button in very specific types of SDK applications could result in the MFP stalling.

• Stored jobs (Locked Print, Sample Print, etc.) might not be shown in the operation panel if the DataOverwriteSecurity Unit is installed.

• After the MFP enters Energy Saver mode, the USB host ports will no longer work until the device is rebooted.

Other changes:

• A new menu selection ("Proh. Some Services") was added to the @Remote Service menu inside the Extended Security menu.

• The optional Data Overwrite Security unit (DOSS) can be installed without uninstalling the DOSS unit already installed as standard.

• The Auto logout timer no longer stops counting while a job is being processed.

• If Basic Authentication was enabled and either "Restrict Use of Destination" or "Restrict Adding of User Destinations" were on, users were unable to access the addressbook even to change their own password. After the change, users will be able to change their passwords.

• The MFP's password policy can now be changed even when an external server is used for authentication.

1.01


• The Lanier model name for Asia is missing from the "Maker/Model Name" in SP5-907-001 (Plug & Play).

1.02

…continued


of 28

SYSTEM/COPY FIRMWARE FIRMWARE VERSION


• Enabling of 'User Code Auth. > Printer > PC Control' results in accounts created automatically upon submission of a job being given no permission to any device functionality.

• Use of the "Capture Function" (SP5836-001) with the TIFF format (SP5836-081 - SP5836-085) might result in an SC819 or SC899 error.

• The SP Mode key does not work when pressed during a copy job.

Other changes:

• Support for the Bluetooth option (USB dongle) has been added.

2.00


• If a supply alert unrelated to paper (e.g. related to toner, toner collection bottle,etc.) is triggered nine or more times while the machine main power is ON, an @Remote notification of this alert is not sent.

• If the Paper End condition occurs while printing out a duplex FAX document, the FAX function "stalls".

2.01

Other changes:

• The analysis component has been added in response to the ADF non detection problem after recovering from Sleep Mode.

2.02


• Minor bug corrected (Japanese model only).

2.03


of 28

3. PRINTER FIRMWARE ver. 1.01.1e:


1.00.1e D1065737A 1st Mass Production1.00.1e D1065737B March 2011 Production 1.01.1e D1065737C March 2011 Production

3.1 PRINTER FIRMWARE HISTORY:

PRINTER FIRMWARE FIRMWARE VERSION

Initial Production Release 1.00.1e Other Changes:

• A new BitSwitch#9-4 has been added. When set to '1', if multiple collated copies are printed, the device no longer responds to PJL USTATUS with the number of pages in the current copy. Instead the device will return the total number of pages for all copies.


• If more than 48 IPDS Tray Forms have been registered, some of the Tray Form buttons ("User Tools/Counter > Printer Features > IPDS Menu > Tray Form") will have the word "None" overlapping the actual button text.

• Note: IPDS Tray Forms are registered via Web Image Monitor.

• The Job Reset dialogue can be displayed whenever there is an Active IPDS session, even if there is no job to reset.

• Batches of jobs being printed from the device hard disk (Locked Print jobs for example) might be interrupted by Normal Print jobs.

1.00.1e


• Anything that causes the MFP to NACK (such as a paper jam or staple/punch out of position) during the submission of an IPDS job might result in an SC899 error.

• Batches of jobs being printed from the device hard disk (Locked Print jobs for example) might be interrupted by Normal Print jobs.

• If more than 48 IPDS Tray Forms have been registered, some of the Tray Form buttons ("User Tools/Counter > Printer Features > IPDS Menu > Tray Form") will have the word "None" overlapping the actual button text.

NOTE: IPDS Tray Forms are registered via Web ImageMonitor.

1.01.1e


of 28

4. FAX FIRMWARE ver. 02.00.00:


01.00.00 D1055736A 1st Mass Production02.00.00 D1055736B March 2011 Production

4.1 FAX FIRMWARE HISTORY:

FAX FIRMWARE FIRMWARE VERSION

Initial Production Release 01.00.00 Other changes:

• Japanese domestic model only: A minor change related to IP-FAX was made.

02.00.00


of 28

5. GWFCU3-22(WW)(FCU) FIRMWARE ver. 01.00.00:


01.00.00 D1055738A 1st Mass Production

5.1 GWFCU3-22(WW)(FCU) FIRMWARE HISTORY:

GWFCU3-22(WW)(FCU) FIRMWARE FIRMWARE VERSION

Initial Production Release 01.00.00


of 28

6. MEDIAPRINT FIRMWARE ver. 1.00.01:



6.1 MEDIAPRINT FIRMWARE HISTORY:

MEDIAPRINT FIRMWARE FIRMWARE VERSION



of 28

7. NETWORK DOCBOX FIRMWARE ver. 1.04:


1.02 D1055746A 1st Mass Production1.03 D1055746B March 2011 Production 1.04 D1055746C December 2011 Production

7.1 NETWORK DOCBOX FIRMWARE HISTORY:

NETWORK DOCBOX FIRMWARE FIRMWARE VERSION

Initial Production Release 1.02 Other changes:


1.03

Other changes:

• Scan to file would not allow the creation of PDF files if the "Master Password" setting was configured but the "Document Password" setting was not. After the fix, Scan to file will now allow the creation of PDF files under these conditions.

This firmware is dependent on the following firmware modules. Please be sure to update all of them:

Network DocBox Ver 1.04 (D1055746C) Scanner Ver 01.07 (D1055739C)

Web Uapl Ver 1.03 (D1055741C)

1.04


of 28

8. NETWORK SUPPORT FIRMWARE ver. 10.61:


10.51.2 D1055745A 1st Mass Production10.56 D1055745B March 2011 Production 10.57 D1055745C April 2011 Production 10.58 D1055745D June 2011 Production 10.59 D1055745E December 2011 Production 10.61 D1055745F March 2012 Production

8.1 NETWORK SUPPORT FIRMWARE HISTORY:

NETWORK SUPPORT FIRMWARE FIRMWARE VERSION

Initial Production Release 10.51.2 Other changes: SSL-related changes:

NOTE: The new field will only appear if Web Support firmware version 1.01 or later has also been applied to the device.

• When the device creates a certificate request, it is now able to specify which algorithm (SHA1 or MD5) it wants used to sign the certificate. This has been implemented by adding a field "Algorithm Signature" to the certificate request form.

• Web Image Monitor now shows the certificate's key length in:

- Configuration > Security > Device Certificate > Details

• Specific versions of SSL or TLS (SSLv2, SSLv3, or TLSv1) can now be enabled/disabled using Web Image Monitor. The setting can be configured from either of the following locations:

- Configuration > Security > Network Security - Configuration > Security > SSL/TLS

• The encryption strength used for SSL can now be configured. This can be done using either of the following settings in Web Image Monitor:

- Configuration > Security > Network Security - Configuration > Security > SSL/TLS

• For security reasons, the device will no longer accept SSL incoming, or establish outgoing, connections that use NULL or ADH ciphers.


• Chunk Transfer Encoding over an IPP port might results in print jobs being reset.

• If SSDP = Active (Web Image Monitor > Configuration > Network Security), a high load on the CPU might result in the MFP stalling with an SC899 error.

• MFP with an external controller will lose network connectivity. This only occurred if the network settings were changed repeatedly and the MFP's "NetWare" setting was already "Active" (before the network settings were changed).

10.56

…continued


of 28

NETWORK SUPPORT FIRMWARE FIRMWARE VERSION


• The MFP icon might not be shown in the Windows "Network" dialogue if SSDP is enabled. This affected Windows Vista, 2008/R2, and 7.

• The device might lose network connectivity if SSDP is enabled. Network connectivity could be temporarily restored after a power cycle.

10.57


• MFP with an external controller will lose network connectivity. This only occurred if the network settings were changed repeatedly and the MFP's "NetWare" setting is already "Active" (before the network settings were changed).

10.58


• Use of an IP address to send a Scan to SMB might result in the scanned document not being sent.

• Scan to SMB fails if the both of the following conditions are met.

- Either the device has NBT disabled or it is enabled but the device is unable to resolve the destination's NetBIOS name.

- One or more octets in the destination's IPv4 address contain leading zeros.

• If the device's IPP Authentication setting is enabled, the driver cannot be installed on Windows 2008 R2 SP1 or 7 SP1 using an IPP port.

• Jobs were intermittently cancelled if "LPR Byte Counting Enabled" was unchecked for LPR ports.

10.59


• Printer hangs when multiple jobs are submitted in the same session to the printer's lpd from AS/400, HP-UX or Solaris.

10.61


of 28

9. POWER SAVING SYS FIRMWARE ver. F.17:


F.13 D1055734A 1st Mass ProductionF.14 D1055734B March 2011 Production F.15 D1055734C May 2011 Production F.16 D1055734D October 2011 Production F.17 D1055734E December 2011 Production

9.1 POWER SAVING SYS FIRMWARE HISTORY:

POWER SAVING SYS FIRMWARE FIRMWARE VERSION

Initial Production Release F.13 Corrects the following:

• USB disconnection occurs when the machine enters Energy Saver Mode.

F.14


• The machine does not recover from Energy Saver Mode when PowerSavingSys F.14 and System/Copy v1.01 are installed.

F.15


• The machine does not detect the status of the ADF after recovering from Sleep Mode.

F.16


• SC816-90 occurs when the machine starts up, and cannot be cleared until the main power is turned OFF/ON.

• SC816-94 occurs when the machine receives SNMP packet while in energy saving mode.

F.17


of 28

10. REMOTE FAX (RFAX) FIRMWARE ver. 03.00.00:


01.00.00 D1055737A 1st Mass Production02.00.00 D1055737B March 2011 Production 03.00.00 D1055737C June 2011 Production

10.1 REMOTE FAX (RFAX) FIRMWARE HISTORY:

REMOTE FAX (RFAX) FIRMWARE FIRMWARE VERSION



02.00.00

Other changes:


03.00.00


of 28

11. SCANNER FIRMWARE ver. 01.07:


01.05 D1055739A 1st Mass Production01.06 D1055739B April 2011 Production 01.07 D1055739C December 2011 Production

11.1 SCANNER FIRMWARE HISTORY:

SCANNER FIRMWARE FIRMWARE VERSION

Initial Production Release 01.05 Corrects the following:

• Minor bug corrected (Japanese model only).

01.06

Other changes:





01.07


of 28

12. WEB SUPPORT FIRMWARE ver. 1.01:


1.00.1 D1055740A 1st Mass Production1.01 D1055740B March 2011 Production

12.1 WEB SUPPORT FIRMWARE HISTORY:

WEB SUPPORT FIRMWARE FIRMWARE VERSION


• SSL-related changes:

NOTE: The new fields will only appear if Network Support firmware version 10.56 or later has also been applied to the device.

1. When the device creates a certificate request, it is now able to specify which algorithm (SHA1 or MD5) it wants used to sign the certificate. This has been implemented by adding a field "Algorithm Signature" to the certificate request form.

2. Web Image Monitor now shows the certificate's key length in: - Configuration > Security > Device Certificate > Details

3. Specific versions of SSL or TLS (SSLv2, SSLv3, or TLSv1) can now be enabled/disabled using Web Image Monitor. The setting can be configured from either of the following locations: - Configuration > Security > Network Security - Configuration > Security > SSL/TLS

4. The encryption strength used for SSL can now be configured. This can be done using either of the following settings in Web Image Monitor: - Configuration > Security > Network Security - Configuration > Security > SSL/TLS

• Users can now change their passwords for Basic Authentication using Web Image Monitor if the following conditions are met:

- Basic Authentication is enabled. - Either of the following device settings is enabled

- User Tools/Counter > System Settings > Administrator Tools > Extended Security > Restrict Use of Destinations

- User Tools/Counter > System Settings > Administrator Tools > Extended Security > Restrict Adding of User Destinations


1.01


of 28

13. WEB UAPL FIRMWARE ver. 1.03:


1.01 D1055741A 1st Mass Production1.02 D1055741B March 2011 Production 1.03 D1055741C December 2011 Production

13.1 WEB UAPL FIRMWARE HISTORY:

WEB UAPL FIRMWARE FIRMWARE VERSION



1.02

Other changes:





1.03


of 28

14. PDF FIRMWARE ver. 1.01:


1.00 D1065741 1st Mass Production1.01 D1065741A October 2011 Production

14.1 PDF FIRMWARE HISTORY:

PDF FIRMWARE FIRMWARE VERSION


• PDF Direct jobs containing a mask that was created using tiling will be reset.

1.01


of 28

15. PS/PDF FIRMWARE ver. 1.01:


1.00 D1065740A 1st Mass Production1.01 D1065740B October 2011 Production

15.1 PS/PDF FIRMWARE HISTORY:

PS/PDF FIRMWARE FIRMWARE VERSION


• PDF Direct jobs containing a mask that was created using tiling will be reset.

1.01


of 28

16. RPCS FIRMWARE ver. 3.10.17:



16.1 RPCS FIRMWARE HISTORY:

RPCS FIRMWARE FIRMWARE VERSION



of 28

17. LANGUAGE INSTALL FIRMWARE ver. 1.02:


1.01 D1041496 1st Mass Production1.02 D1041496A March 2011 Production

17.1 LANGUAGE INSTALL FIRMWARE HISTORY:

LANGUAGE INSTALL FIRMWARE FIRMWARE VERSION


• A cautionary message will be displayed while HDD encryption is being performed.


1.02


of 28

18. PCL FIRMWARE ver. 1.03:


1.01 D1065739A 1st Mass Production1.02 D1065739B June 2011 Production 1.03 D1065739C March 2012 Production

18.1 PCL FIRMWARE HISTORY:

PCL FIRMWARE FIRMWARE VERSION


• - The color of objects in a PCL5 macro might not have been assigned a color, resulting in them being the same color as the background. This made them invisible. - The wrong font might be used in PCL5 jobs containing PCL5 macros. This could result in text appearing differently than expected.

• Objects out of position in PCL5 jobs containing HP-GL/2 and macro.

• Shifted characters in duplex PCL jobs containing macros that use either of the following commands: <ESC>&l#U <ESC>&l#Z

1.02


• SC899 caused by the printing of specific kinds of scalable TrueType fonts.

1.03


of 28

19. OPEPANEL.EXP (LCDC) FIRMWARE ver. 1.02:


1.01 D1041491A 1st Mass Production1.02 D1041491B March 2011 Production

19.1 OPEPANEL.EXP (LCDC) FIRMWARE HISTORY:

OPEPANEL.EXP (LCDC) FIRMWARE FIRMWARE VERSION


• A cautionary message will be displayed while HDD encryption is being performed.


1.02


of 28

20. JAVA VM V7 STD UPDATE TOOL FIRMWARE ver. 7.16.07:


7.09.03 D1065743A_upd November 2010 Production7.14.03 D1065743C_upd June 2011 7.16.07 D1065743D_upd November 2011

20.1 JAVA VM V7 STD UPDATE TOOL FIRMWARE HISTORY:

JAVA VM V7 STD UPDATE TOOL FIRMWARE FIRMWARE VERSION


• Minor bug correction.

7.09.03

Supported:

• Support for eDC-i1.2 and Remote Install Manager V1.1 was added.


• May not be able to stop the application from the User Tools/Counter/Enquiry screen if an SDK application takes more than 15 seconds to start up.

• The device may stall if an SDK application takes more than 15 seconds to start up.

• SC997 can occur if an SDK application takes more than 15 seconds start up.

• If machine authentication is enabled, pressing the System Settings button on the User Tools/Counter/Enquiry screen has no effect, even when logged in as a machine administrator.

• If a user was logged in when the On/Off button is used to turn the device off, the "Cannot Logout" message is displayed the next time the On/Off button is used to turn the device on. The message is displayed even though the user has been logged out.

• The maximum paper size retrieved from the device is larger than the actual maximum scannable/printable size.

Others:

• The Java VM v7.xx update tool has been merged into a single download object (self-extracting archive) which can be used for all supported models. A list (list.txt) of supported VM card part nos. is included in the update archive.

7.14.03

Symptom corrected:

• SDK/J starting logo screen does not change.

• Vulnerability to the re-negotiation of SSL/TLS.

• Multi installation to HDD fails for VM card Type-C applications.

• Other minor bug corrections.

Other changes:

• Kerberos certification corresponding to RC4-HMAC code form.

• VM card Type-C application remote installation.

• Support for eDC-i1.2.

7.16.07


of 28

21. JAVA VM V7 FOR eDC FIRMWARE ver. 7.16.07:


7.14.03 D1065743C_edc June 2011 7.16.07 D1065743D_edc November 2011

21.1 JAVA VM V7 STD UPDATE TOOL FIRMWARE HISTORY:

JAVA VM V7 FOR eDC FIRMWARE FIRMWARE VERSION

• Initial release 7.14.03

Symptom corrected:

• SDK/J starting logo screen does not change.

• Vulnerability to the re-negotiation of SSL/TLS.

• Multi installation to HDD fails for VM card Type-C applications.

• Other minor bug corrections.

Other changes:

• Kerberos certification corresponding to RC4-HMAC code form.

• VM card Type-C application remote installation.

• Support for eDC-i1.2.

7.16.07


of 28

22. OPTION IPDS FIRMWARE ver. 7.073:


7.073 D1065742 1st Mass Production

22.1 OPTION IPDS FIRMWARE HISTORY:

OPTION IPDS FIRMWARE FIRMWARE VERSION

Initial Production Release 7.073


of 28

23. APP2ME FIRMWARE ver. 1.5.700:

NOTE: The APP2ME Firmware History is also maintained in the D549 Firmware History document.


1.5.500 D1065744A 1st Mass Production1.5.700 D1065744B June 2011 Production

23.1 APP2ME FIRMWARE HISTORY:

APP2ME FIRMWARE FIRMWARE VERSION

Initial Production Release 1.5.500 Corrects the following:

• Minor bug correction.

1.5.700


of 28

24. FINISHER1 FIRMWARE ver. 0.41:10 NOTE: Finisher1 firmware can also be found on the D037/D038/D040/D041 Firmware History.


0.039 D4295550C 1st Mass Production 0.40:10 D4295550D September 2010 Production 0.41:10 D4295550E July 2011 Production

24.1 FINISHER1 FIRMWARE HISTORY:

FINISHER1 FIRMWARE FIRMWARE VERSION


• Jam Code 001 appears even when the following paper jams have been detected:

Jam Code 240: Entrance sensor of the internal finisher does not detect paper (in duplex copy/printing mode). Jam Code 244: The mainframe detects the lock signal from the front or rear jogger motor. Jam Code 245: The mainframe detects the lock signal from the pick-up roller contact motor.

Other changes

• Paper feeding has been improved to support the following types of paper feeding through Long Edge Feed.

1. Com 10 Envelope 2. C6 Envelope 3. DL Envelope

0.40:10


• Single pages are stapled when printing out a copy or print job.

• The "Output Tray Full" message remains displayed when the paper is is removed from the internal finisher output tray.

0.41:10

14848d1331864301 sc819 mpc2551 cant update firmware d104 firmware history

Documents

edc firmware

printer firmware

wwfcu firmware

systemcopy firmware

mediaprint firmware

scanner firmware

pspdf firmware

rpcs firmware