14bproduct catalog cushion arc full arc 2016 - richwood · 2019. 4. 30. · richwood.com e:...

richwood.com e: [email protected] Cushion Arc ® and Full Arc ® Heavy Duty Idlers Finally, an idler has been designed that can maintain superior operating performance in any field condition while protecting your conveyor belt. The durability of the Cushion Arc ® and Full Arc ® are demonstrated in each of their high quality, heavy duty components. Quality Components Include: Roller Segment: Each Idler has 5-9 individual rollers. Cushion Arc ® use impact resistant, 6” diameter flame retardant MSHA rubber molded over a 2 3/4” diameter steel shell. Each roller uses permanently sealed 30mm ball bearings on the solid steel shaft to complete the assembly. Steel rollers are 6” diameter with 1/8” or 1/4” thick shells. Roller T-Frame: Offers independent support for each impact roller on the main idler frame for simple installation. The roller T-Frame quickly slides on and off from the side of the conveyor for change out of individual rollers. Unitized Steel Support Frame: The entire unit can be installed with the belt in place. It is available for any belt width or support profile. Maintenance is easy. Simply replace the rollers from the side of the belt when needed. Call today for assistance with your application. • solid steel independent roller shafts • extra heavy duty inner shell • flame retardant MSHA rubber solid molded impact rollers • 30mm sealed ball bearings • fully protected ball bearings with multiple seal design (800) 237-6951 f: (304) 525-8018 ® RICHWOOD ©2015 Richwood

Upload: others

Post on 05-Oct-2020

1 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

richwood.come: [email protected]

Cushion Arc® and Full Arc®

Heavy Duty Idlers

Finally, an idler has been designed that can maintain superior operating performance in any fi eld condition while protecting your conveyor belt. The durability of the Cushion Arc® and Full Arc® are demonstrated in each of their high quality, heavy duty components.Quality Components Include: Roller Segment: Each Idler has 5-9 individual rollers. Cushion Arc® use impact resistant, 6” diameter fl ame retardant MSHA rubber molded over a 2 3/4” diameter steel shell. Each roller uses permanently sealed 30mm ball bearings on the solid steel shaft to complete the assembly. Steel rollers are 6” diameter with 1/8” or 1/4” thick shells.Roller T-Frame: Off ers independent support for each impact roller on the main idler frame for simple installation. The roller T-Frame quickly slides on and off from the side of the conveyor for change out of individual rollers.Unitized Steel Support Frame: The entire unit can be installed with the belt in place. It is available for any belt width or support profi le.Maintenance is easy. Simply replace the rollers from the side of the belt when needed. Call today for assistance with your application.

• solid steel independent roller shafts

• extra heavy duty inner shell

• fl ame retardant MSHA rubber solid molded impact rollers

• 30mm sealed ball bearings

• fully protected ball bearings with multiple seal design

(800) 237-6951f: (304) 525-8018

Cushion Collection

Do you know if Richwood has an Airport ? Yes, Richwood does have an Airport. Yes, It is a real Airport. Yes, even twin engine planes can land here At

2010-11 - MRD · PDF fileFlorentine Stripe Cushion Green TFSGR Florentine Squares Cushion Green TFSQG Milan Cushion Grey TMG Raw Slub Silk Cushion Olive TRSCH ... LSK. 19 -

Blooming Flower Cushion

Cushion Wrestling

Richwood Site Improvement Project Case #19-170 · Richwood Site Improvement Project Case #19-170 Jon Rosenthal, Manager Florida Power & Light Company . September 21, 2020