[15-147] 81r a3 folder timesavers m timesavers international, goes, the netherlands. timesavers...
TRANSCRIPT
MTimesavers International, Goes, The Netherlands.
Timesavers International B.V.
Fruitlaan 20-30
4462 EP Goes
The Netherlands
T. +31 113 23 89 00
F. +31 113 23 20 03
Local dealer:
www.timesaversint.com
Seehow
itworks?
[scan the QR code]
81Range
Precision grinding machine
Machine with reciprocating table to grind titanium,
molybdenum, stainless steel, aluminium nickel
alloys and carbon steel to a specific size with an
accuracy of +/- 0,02. high stock removal rate by
using coated abrasives.
www.timesaversint.com
Timesavers International is based in Goes, The Netherlands, with regional of-
fices around the globe in Shanghai (China), Taichung (Taiwan), Kuala Lumpur
(Malaysia) and Timesavers Inc. in Minneapolis (USA). Worldwide the company
has more than 200 employees supported by a network of local dealers and
partners. In the 76 years of their existence, they have built and sold over
55.000 machines, with customers in nearly all countries over the world.
Goes is right next to the highway A58,
easy accessible by car, but also by
train, the trainstation is just around
the corner. When travelling by plane,
choose Airport Amsterdam or Brussels.
Operating Worldwide: Visit us:
Amsterdam
Rotterdam
Goes
Antwerp
Brussels
81Range
[15-
147]
Available configurations:
Working width Min length Max length
600 mm 500 mm 7500 mm
1000 mm 500 mm 7500 mm
1600 mm 1500 mm 7500 mm
2100 mm 1500 mm 7500 mm
Applications:
- Precision grinding of titanium, molybdenum, stainless steel, nickel alloys, aluminium and carbon steel
- Grinding sheets to a specific thickness when not available on the market
- Eliminating machine marks
- Stock removal up to 0,2 mm per pass
- Accuracy +/- 0,02 mm
- Thinnest sheet 0,15 mm
- Centralized control panel on swing arm or slide on the machine frame
- HMI with pre-programmable settings
- Abrasive belt contact roller with possibility to run clockwise and counter clockwise rotation
- Wet execution, with integrated spray pipes in the machine and separate course and fine filter system
- Integrated vacuum system, with safety measuring system
- The vacuum system is capable of running wet and protected against swarf impact in the rotating parts
of the pump
- One or multiple vacuum segments, independent switchable
- Quick exchange system for the grinding belt
- Motorized table opening from 0-100 mm
- Variable feed of the reciprocating table from 0,1-10 m/min
- Variable speed of the abrasive grinding belt 7-22 m/sec
- Chiller in the filter unit
- CE
- Magnetic chuck, electro/permanent with demagnetizing cycle
- Special vacuum chuck for thin material < 0,6 mm
- Customized vacuum adapter plates for both thick and thin material
Standard execution: Options: