153-47887
DESCRIPTION
aaTRANSCRIPT
Sensitron · 221 West Industry Court · Deer Park, NY 11729-4681 · Phone (631) 586 7600 · Fax (631) 242 9798 · World Wide Web - www.sensitron.com · E-mail - [email protected]
135-0308
So l id S ta te Power Management
Sensitron • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586 7600 • Fax (631) 242 9798 • World Wide Web - www.sensitron.com • E-mail - [email protected]
Standard Solid State Power Controllers/ Circuit Breaker
Low Current
28Vdc, 1A-40A SPDP10D28 SPDP15D28 SPDP20D28 SPDP25D28 SPDP30D28 SPDP40D28 High Current
28Vdc, 60A-120A SPDP60D28 SPDP80D28
SPDP100D28 SPDP120D28 High Voltage
270V-375V, up to 50A SPDP03D270 SPDP10D270 SPDP03D375 SPDP10D375 SPDP50D375 AC/DC SSPC
115Vac/150Vdc, 9A SPD8A115
Solid State Power Management Sensitron www.sensitron.com/solidstate.htm
Multi-Channel Standard Solid State Power Controllers
Cobra Series 1 Amp-150 Amp
SPDM1D28 SPDM2D28 SPDM3D28 SPDM4D28 SPDM5D28 SPDM6D28
Solid State Relays/Contactors
DC Loads 55V-1200V, up to 100A
SSR015D060 SSR025D080 SSR050D120 SSR100D005 SSR100D010 SSR100D020
AC Loads 48V-660Vac, 75A
SCP-5285 MIL-STD-1275 Tranzorb
SEN-5282
Custom variations of all Solid State Products available.
Sensitron • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586 7600 • Fax (631) 242 9798 • World Wide Web - www.sensitron.com • E-mail - [email protected]
Programmable 28V DC, 1A-40A Solid State Power Controller
Sensitron also offers Programmable Solid State Controllers in a higher current range:
Part Number Current (Amps)
(Program Range) Voltage
Max Voltage Drop@ Full Load
SPDP05D28* 1 A - 5 A 28 Vdc 73 mV SPDP10D28* 2 A - 10 A 28 Vdc 95 mV SPDP15D28* 3 A - 15 A 28 Vdc 113 mV SPDP20D28* 4 A - 20 A 28 Vdc 105 mV SPDP25D28* 5 A - 25 A 28 Vdc 107 mV SPDP30D28* 6 A - 30 A 28 Vdc 123 mV
SPDP40D28 8 A - 40 A 28 Vdc 40 mV
Features/Benefits: • 28V DC input with very low voltage drop; 60mV, typ. @ 15A • Low Weight: 20 gm max • True I2t protection • Instant trip protection (50 µsec typ) for loads above 10X Rating • Repetitive fault handling capability • Thermal memory • Internally generated isolated supply to drive the switch • Current slew control to reduce EMI • Built-in R-C filters to avoid latch up during a radiation event • Programmable over a 5:1 current range • Leach & DDC Compatible Footprint • Ultra Small Size: Occupies 43% less pcb space than competitive product • 38% lower voltage drop at 25A compared to competition • Low losses: 3W typical at full load for 25A • Unlimited Short Circuit Protection • -55oC to 100oC operation with NO DERATING or HEAT SINK REQUIRED! • Optional Mil Screening Available
Standard Solid State Power Controllers Sensitron www.sensitron.com/sspc.htm
* Add P to the part number for Parallel Programmable Series(SPDPXXD28P), featuring a single wire parallel operation of 2 units. For more information, contact us at [email protected]
Two available sizes: Low profile:
2.4”x1.8”x0.925” Industry standard:
3.75”x3.13”x3.0”
Part Number Current (Amps)
Voltage
SPDP60D28 60 A 28 Vdc SPDP80D28 80 A 28 Vdc
SPDP100D28 100 A 28 Vdc SPDP120D28 120 A 28 Vdc
Sensitron • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586 7600 • Fax (631) 242 9798 • World Wide Web - www.sensitron.com • E-mail - [email protected]
Programmable 270V–375Vdc, up to 50A Solid State Power Controller
Sensitron’s Solid State Power Controllers meet the following Military Standards:
Features/Benefits: • 375Vdc input with very low voltage drop; 220mV, typ. @ 10A for SPDP10D375 • Low weight: 40 gm max • Soft turn-on to reduce EMC issues • True I2t protection up to 8X rating with nuisance trip suppression • I2t protection level externally programmable to 30% of the maximum rating • Instant trip protection level externally programmable from 400% to 800% • Reports loss of line voltage & over temperature condition • Output leakage sink for safe output voltage when SPDPxxD375 turned off • No trip operation upto 220µF of output capacitance • Instant trip protection (40 µsec typ) for loads above programmed instant trip level • Unlimited interrupt capability; repetitive fault handling capability • Thermal memory • Low bias supply current: 15 mA typ @ 5V DC • High control circuit isolation: 750V DC control to power circuit • Built-in R-C filters to avoid latch up during a radiation event • Schmitt-trigger control input for noise immunity • Available as 2 families, each programmable from 30% to 100% rating
Standard Solid State Power Controllers Sensitron www.sensitron.com/sspc.htm
Part Number Current Voltage Max Voltage Drop@ Amps SPDP03D270 3A 270 Vdc 260 mV SPDP10D270 10A 270 Vdc 270 mV SPDP03D375 3A 375Vdc 260mV SPDP10D375 10A 375Vdc 270mV SPDP50D375 50A 375Vdc 440mV
MIL-STD-1275B Compliant Meets All Requirements including:
• Operation with Battery & Generator • Generator Only & Battery Only • Cranking, Surges, Spikes & Ripple
MIL-STD-704F Compliant Meets All Requirements including:
• Normal, Emergency, Abnormal & Electrical Starting Conditions
• Ripple, Distortion Factor & Spectrum
Sensitron • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586 7600 • Fax (631) 242 9798 • World Wide Web - www.sensitron.com • E-mail - [email protected]
Multi-Channel SSPC Sensitron www.sensitron.com/multi.htm
Features/Benefits:
• Up to 6 channels, can be used individually or in parallel channel combinations • Programmable from 1 Amp to 25 Amps rated current • Parallel channel capability up to 150 amps • RS-232, RS-422, RS-485 or CAN serial interface bus • BATTLESHORT setting to prevent tripping in extreme circumstances • MAINTENANCE MODE for safe maintenance • Power-up and continuous BIT for each channel and for the entire module • Non-volatile storage of programmed parameters • 28VDC Input: Current rating of up to 25A with very low drop; 50mV, typ. • True I2t protection from 130% to 1000% with nuisance trip suppression • Instant trip protection (10 µsec typ) for loads above 1000% • Unlimited interrupt capability; repetitive fault handling capability • Thermal memory • Internally generated isolated supply to drive the switch • High control circuit isolation: 750V RMS control to power circuit • Soft turn-on to reduce EMC issues • EMI tolerant • ESD tolerant inputs • Trip reset circuit is trip-free • Optically isolated, input and outputs • -55oC to 100oC operating temperature range • No heat sinking required
Compliant Documents and Standards:MIL-STD-1275B, Notice1
MIL-STD-704F MIL-STD-217F, Notice 2
Ordering Information: Part number is SPDMXXD28. “X” denotes the number of channels.
ie. For a 6 channel part, use part number SPDM06D28.
Available Part Numbers:
• SPDM03D28 • SPDM04D28 • SPDM05D28 • SPDM06D28
SPDMXXD28 Cobra Series
Sensitron • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586 7600 • Fax (631) 242 9798 • World Wide Web - www.sensitron.com • E-mail - [email protected]
*Other currents available for specified voltage
Part Number Output Current
(Amps) Voltage
Max Voltage Drop@Amps
SCP-5285 75 A 48V - 660 V AC 1.7 V
Features/Benefits: • 2000V input to output isolation • 600V blocking, 50A continuous current • -55 oC to 100oC base plate • Wide range DC input signal 4.6V to 36V • 400A pulsed • Package Size: 1.4” x 2.6” x .5”
*Part Number Current
(at 100oC) Voltage
SSR015D060 15 600 SSR025D080 25 800 SSR050D120 50 1200 SSR100D005 100 55 SSR100D010 100 100 SSR100D020 100 200
DC Solid State Relays/ Contactors Sensitron www.sensitron.com/ssr.htm
Different configurations available to industry standard packages!
MIL-STD-704 and MIL-STD-461 Compliant
High Voltage, High Current SSR Series
AC Solid State Relay Sensitron www.sensitron.com/ssr.htm
Features/Benefits: • Back-to-back SCR output for high reliability • 75A rating upto 85oC base plate temperature • 1600V surge voltage withstand capability • Zero voltage turn-ON switching to reduce EMC issues • Flexible design configuration • Customizable terminal & device options • Similar to Teledyne SSR1600660D75
Sensitron • 221 West Industry Court • Deer Park, NY 11729-4681 •
Phone (631) 586 7600 • Fax (631) 242 9798 • World Wide Web - www.sensitron.com • E-mail - [email protected]
MIL-STD-1275 TVS Module
Part Number
Reverse Stand-Off Voltage
VWM
(Volts)
Maximum Reverse
Leakage @ VWM
ID (µA)
Minimum Breakdown
Voltage @ 10 mA
V(BR) (Volts)
Maximum Clamping Voltage @
IPP Vc (Volts)
Maximum Peak Pulse
Current IPP (Amps)
SEN-5282 33 25 36.7 49 120
Part Number Current (Amps)
Voltage Max Voltage Drop@Amps
SPD8A115 8 A 150V DC 180 mV
Solid State Power Controllers Sensitron www.sensitron.com/sspc.htm
115Vac/150Vdc Solid State Circuit Breaker/Power Controller Features/Benefits:
• Drop-in equivalent to a DPST relay with a common single side isolated control • DSP controlled w/software reconfiguration for easy addition of new features • 115V AC Input: Current rating of 8A with very low drop; 180mV typ • Very high control circuit isolation: 1500V DC to either pole • True 2-Pole operation: 500V DC isolation between poles • Internally generated isolated supply to drive the switch • AC and DC operation; Two channel with simultaneous control • High Overload Capability up to 250A
Sensitron Part Number: SEN-5282 MIL-STD-1275 Compliant
Application: • +28V DC systems • Allows the use of 55V high efficiency FET • Increase system reliability through eliminating avalanche
FET operation • Clamping below 55V DC for both 100V and 250V pulse • High pulse power capability
http://www.sensitron.com
Sensitron 221 West Industry Court
Deer Park, NY 11729-4681 Phone: (631) 586-7600
Fax: (631) 242-9798 [email protected] www.sensitron.com
Applications Power Distribution Systems in:
Commercial Aircraft
Combat Vehicles
Military Aircraft
Submarines
Ships