16419 holdtite brochure revised lb brochure march 2010.pdft77 10ml, 50ml & 250ml high strength,...

• Thread Lockers • Retainers • Gasketing• Metal Fill • Thread Sealants • RTV Silicone

• Antiseize Agents • Instant Adhesives • Structural Bonding • UV Bonding • Polyurethanes

INNOVATIVE SOLUTIONS TO ALL YOURBONDING AND ASSEMBLY NEEDS

Phone 1300 552 680 www.holdtiteaustralia.com.au

“Liquid products, solid solutions”

Bonding Solutions

1

HEADER

Bonding Solutions

Harald SchaafCompany Director

Holdtite Australia was established on traditional values and long term experience with our manufacturers in Europe and America in the bonding industry. We are dedicated to quality, innovation and customer satisfaction.

Our commitment is to produce and distribute innovative solutions to your bonding and assembly needs. To foster and care for a long term relationship with your company and to bring you the most up to date and technically superior products. We strive to provide the highest quality products possible utilising the fi nest materials and process to manufacture with unmatchable value and profi tability.

Products distributed by Holdtite Australia are produced under a quality system meeting internationally recognised standards. Full traceability is available for each part of the process ensuring total uniformity.

From our manufacturing facilities in England and America, Holdtite Australia import a unique range of adhesives and sealants, offering our customers the choice of formulation technology to match your present assembly/adhesion selection, or your desire to source an alternative supply.

Professional distribution plays a vital role in Holdtite Australia’s policy of continuous expansion and market penetration. Holdtite Australia have the back up of a full sales package giving our customers the reassurance of a product highly acclaimed for quality, reliability and matching specifi cation. Our products are not only among the best products available, but are also competitively priced.

Holdtite Australia is the bonding solution.

“Liquid products, solid solutions”

2

CONTENTS

Mission Statement ......................................................................... 1

Contents .......................................................................................... 2

Threadlockers ................................................................................. 3

Retaining ......................................................................................... 4

Gasketing ........................................................................................ 5

Sealing ............................................................................................. 6

RTV Silicone ................................................................................ 7-8

Instant Bonding .............................................................................. 9

Epoxy ............................................................................................. 10

Structural Bonding ....................................................................... 11

Polyurethane ................................................................................. 12

Lubricants/Antiseize/Hand Cleaners .......................................... 13

Surface Preparation ..................................................................... 14

Standards, Quality & Specifi cations ........................................... 15

Certifi cates .................................................................................... 16

Anaerobics FAQ’s ......................................................................... 17

Comparison Chart ........................................................................ 18

All Technical Data Sheets (TDS) and Material Safety Data Sheets (MSDS) available at our website www.holdtiteaustralia.com.au

INFORMATION LINE: 1300 552 680

3

THREADLOCKERS

Product Available Sizes Product Description Colour Approximate

Viscosity (cP)Maximum Gap Fill

Break / Prevail (N.m)

Sealing Pressure PSI

Temp Range

Fixture Time

Primers Activators Agency Approvals

T22 10ml, 50ml & 250ml

Low Strength, Easy to remove. Fastener smaller than 1/4”

Purple1200 - 5000 CPS

Thixtropic0.18mm

6 to10 3 to 6

N/A-50°C to 150°C

10 - 30 mins

A471 A649

MIL-S-46163A ASTM D-5363 NSF

T43 10ml, 50ml & 250ml

Medium Strength, removable. Fastener 1/4” to 3/4”

Blue2000 - 12000 CPS Thixtropic

0.38mm18 to 22

6 to 8N/A

-53°C to 150°C

5 - 15 minsA471 A649

MIL-S-46163A ASTM D-5363

T62 2ml, 10ml, 50ml & 250ml

Medium Strength. Bolts up to 3/4” Red 1800 - 5000 CPS 0.18mm 19 to 23 15 to 25

N/A-50°C to 150°C

5 - 20 minsA471 A649


T72 10ml, 50ml & 250ml

High Strength, High Temp, Locks nuts or bolts up to 1 1/2”

Red 9500 CPS 0.25mm28 to 35 28 to 34

N/A-50°C to 232°C

5-60 minsA471 A649

N/A

T77 10ml, 50ml & 250ml

High Strength, Locks nuts or bolts up to 1 1/2” Red 7000 CPS 0.25mm28 to 35 28 to 34

N/A-55°C to 150°C

10-20 minsA471 A649

MIL-S-46163A ASTM D-5363

T90 10ml, 50ml & 250ml

Medium Strength Wick Grade. Used on pre-assembled fasteners & pours die castings

Green 3-12 CPS 0.1mm8 to 10

27 to 34N/A

-55°C to 150°C

5-20 minsA471 A649


THREADLOCKERSCREWLOK - PURPLE, LOW STRENGTHT22

For small fasteners that require re-adjustment or easy disassembly including keyed fasteners. Seals threaded fasteners from leakage. Ideal on small set screws, nuts, bolts, threads and brass etc. Prevents loosening under loads or vibration.

THREADLOCKERNUT LOCK - BLUE, MEDIUM STRENGTH (OIL TOLERANT GRADE)T43

Convenient all purpose locker suitable for most operating conditions. Oil tolerant torque tensioning grade designed for direct application onto “as received” parts, with protective film. Prevents corrosion between threads. Prevents loosening under loads or vibration.

THREADLOCKERSTUDLOCK / LUBRICATOR - RED, MID STRENGTHT62

Specially developed Mid Strength Threadlocker. Lubricating during assembly, securing parts with High Strength retention. Will perform on slightly oily surfaces. Prevents loosening under loads or vibration, allowing disassembly when required. Prevents corrosion between threads.

THREADLOCKERSTUDLOCK - RED, HIGH STRENGTHT77

An Anaerobic Locking Compound in the form of a viscous paste and it is used to give High Strength Locking action. Predominately for Fasteners of 25 mm (1” size) and above.

• Studs on Pressure Vessels• Studs on Locomotive Units• Hydraulic Studs on Presses• Rock Crusher Studs• Cat Track Studs

THREADLOCKER - FAST SETTINGPENETRANT - GREEN, WICK-IN GRADET90

Low viscosity, penetrating Threadlocker. Good for close fitting parts (set screws, pre-assembled fasteners). Use as a weld or porosity sealant, seeking out casting irregularities, seals parts from leakage. Prevents loosening of metal threaded fasteners.

THREADLOCKERHIGH TEMP / HIGH STRENGTH - REDT72

Locks nuts or bolts up to 1 1/2” in diameter in high temp applications.

• Studs on Pressure Vessels• Studs on Locomotive Units• Hydraulic Studs on Presses• Rock Crusher Studs• Cat Track Studs

FOR UNASSEMBLED NUTS & BOLTS

FOR ASSEMBLED NUTS & BOLTS

4

RETAINING

RETAINER COMPOUNDBEARING FIT-YELLOWR41

Medium strength easily removable compound securing all types of bearings, shafts, cylindrical and parts allowing disassembly when required.

R60 RETAINER COMPOUND METAL FILL

Used to fill and repair cylindrical parts. Press fit repair compound, designed to quickly re-fit worn parts. Prevents bearing spinout. Will harden once parts are assembled, allowing easy excess cleanup outside repair.

RETAINER COMPOUNDHIGH TEMP RETAINER R62

Retainer is rated up to 232ºC as the upper operational temperature. R62 is designed for bonding/securing in a high strength manner, all types of cylindrically fitted parts. Used on all types of applications where temperatures exceed the design features of conventional retainers above 150ºC. R62 develops High Strength at elevated temperatures. Speed cure R62 by applying localised heat with a heat gun or place parts in oven @100ºC for 30 minutes. Pre-heating of parts also accelerates the fixture and ultimate final cure.

RETAINER COMPOUNDEXTRA HIGH STRENGTHR68

High Strength retention for cylindrical parts under dynamic load/stresses, keys, splines, gears etc. Fatigue resistant under heavy loads.



Tensile Sheer Nmm2

Sealing Pressure

Temp Range

Fixture Time


R41 10ml, 50ml & 250ml

Mid Strength, low viscoisty Retaining Compound Yellow 1500 CPS 0.2mm 8 to 16 N/A-51°C to 150°C

10 - 15 mins

A471 A649

MIL-S-46082B22473E. DIN 54454

R69 10ml, 50ml & 250ml

Mild Strength, low viscosity Retaining Compound Green 125 CPS 0.125mm 11.5 N/A-51°C to 148°C

10 - 20mins

A471A649

MIL-R-46082 ASTM D-5363 GM-1183024

R60 50ml & 250ml Metal Fill, Quickly re-fi ts worn parts Silver/ grey

Paste 0.5mm >25 N/A-53°C to 150°C

30 mins A649MIL-S-46082B

22473E. DIN 54454

R62 10ml, 50ml & 250ml

High Temperature, Retaiing Compound Green 7000 CPS 0.4mm 20 N/A-55°C to 232°C

30 minsA471 A649

MIL-S-46082B22473E. DIN 54454

R68 10ml, 50ml & 250ml

High Strength, Retaining Compound Green 2500 CPS 0.3mm >24 N/A-53°C to 150°C

30 minsA471 A649

MIL-S-46082B22473E. DIN 54454

R69 RETAINER COMPOUND MILD STRENGTH

Holdtite Australia’s R69 Mild Strength Retaining Compound is a single part, low viscosity, fast curing anaerobic resin used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies.Holdtite Australia’s R69 is recommended for interference or press fit parts where large gap filling is not required.

5

GASKETING

DURAFORM GASKETHIGH TEMPERATURE GASKET - REDG51

G51 is a fast set, form in place gasket maker for all types of metal parts, sealing and resisting temperatures up to 200ºC used for sealing any shape or size of high temperature application, dressing gaskets or making rigid assemblies. Apply G51 by tube tracing, roll coating, screen printing, pads etc. Before cure takes place, G51 will give an instant seal.

FLANGE SEALANT DESIGNER GASKET - PURPLEG55

Form in place, tough, flexible gasket. Instant low pressure seal.Used for fuel and water pumps, split crank cases, gearbox covers, engine thermostats, small implements etc.

FLANGE SEALANT SPECIAL GASKET / STIFF PASTE - REDG58

High viscosity, suitable for aluminium joints. A form in place, tough, flexible gasket. Instant low pressure seal. Used for fuel tanks, pumps, crank cases, engine and gearbox covers, chainsaws, lawn mowers, etc.


Viscosity (cP)MaximumGap Fill

Break / Prevail (Nm)

Sealing Pressure

Temp Range

Fixture Time


G51 50ml & 250ml

High Temperature Form In Place Gasket Red >50,000 CPS 0.4mm 12.5N/mm2 N/A-55°C to 200°C

15 mins /2 hours

A471 MIL-S-22473E

G55 50ml, 250ml & 300ml

Flexible Gasket Maker Purple>275,000/

950,000 CPS0.5mm

8N/mm2 to 12.5N/mm2

N/A-55°C to 150°C

up to 24 hours A471 MIL-S-22473E

G58 50ml & 250ml

Flexible Gasket Maker. Good for Alloy Red>800,000/

3,750,000 CPS0.5mm

8N/mm2 to 12.5N/mm2

N/A-55°C to 150°C

up to 12 hours A471 MIL-S-22473E

GHYB-100 100ml Automotive non-hardening gasket

Vibrant Blue

500 CPS +- 1000 CPS

0.5mm N/Aup to

10,000psi -50°C to 150°C

5 - 10 mins

Anaerobic liquid gasketing is designed primarily for close fitting (and small gap) rigid metal flanges. The anaerobic material remains liquid when exposed to air but cures when confined to mating flanges. Anaerobic liquid gasketing can fill gaps and alleviate the need for pre-formed gaskets. It is ideal for flanges that move in service and can be used as form in place gaskets.

Holdtite Australia’s range of form in place gasketing products are ideal for close fitting liquid metal flanges, particularly flanges that move in service.

WHAT IS LIQUID GASKETING?

• Controlled tolerances, no need for re-torquing;

• No shrinkage when cured;

• Parts are easily dismantled even after extended service;

• Resists high pressure when cured.

BENEFITS OF HOLDTITE GASKETS

AUTOMOTIVE HYPERSEAL NON-HARDENING GASKET - BLUEGHYB-100

GHYB-100 is a new technology sealant which is free from solvent problems of other formulations and stays flexible when cured. It’s an all purpose, non-cracking, user-friendly formulation.

6

SEALING

PIPE SEAL GAS PIPE SEALANT - YELLOW S77 & S77U

AGA Approval # 6900 & AS 4623-2008 Certifi cate # 7604 S77 is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar for non-ferrous threads. S77 is not suitable for oxygen systems. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. When cure speed is extended due to low temperatures or inactive surfaces, Activator A471 or the faster A649 can be used. Best results are found if S77 is applied to second or third threadform. Excess can be wiped away; any migration into lines will not solidify and can be flushed away during commissioning.



Break / Prevail (Nm)

Sealing Pressure

Temp Range

Fixture Time (Min)


S54 50mls & 250mls

Tough High Pressure Seal Brown 1000 - 2750 CPS 0.25mm 20Nm/15Nm 5800psi-55°C to 150°C

10 - 20 mins full cure 12hr

A471 A649

MIL-S-22473E

S57 50mls & 250mls

Pipe Sealant with Tefl on White 350,000 CPS 0.5mm 5Nm -25NmInstant 100psi

full cure 10,000psi

-55°C to 200°C

45 mins full cure 24 hr

A471ANSI/NSF61 Section 6 Drinking Water Systems

S69 50mls & 250mls

Hydraulic Sealant Brown 400 -800 CPS 0.25mm 20Nm /15Nm 5800psi-55°C to 150°C

10-20 mins full cure 12hr

A471 A649

MIL-S-22473E

S72 50mls & 250mls

72 hr cure, Instant Low Pressure Pipe Sealant White 20,000 CPS 0.4mm 6Nm/2NmInstant 100psi

full cure 5000psi

-55°C to 150°C

60 hours N/A MIL-S-22473E

S77 /S77U

50mls & 250mls

High Strength Gas Pipe Sealant Yellow >50,000 CPS0.05 to 0.4mm

>3-9N/mm2 to >15N/mm2

Instant 100psi full cure 5000psi

-55°C to 150°C

15 mins full cure 12hr

A471 A649

AGA Approval # 6900& AS 4623-2008 Certifi cate # 7604

49494 Dip Brush Can 113g

Thread Sealand with PTFE White paste N/A N/Aup to

10,000psi-37°C to 287°C

N/A N/A N/A

PIPE SEALANT WITH PTFE S57Anaerobic sealant chemically cures in the absence of air. Locks and seals threaded fittings. Lubricates and resists corrosion. Prevents leakage and loosening from vibration and moisture in hydraulic, pneumatic, steam and process piping. Allows final adjustment for several hours after application.

THREAD SEALANTSPECIAL HYDRAULIC SEALANTHIGH STRENGTH-BROWNS69

S69 Hydraulic Seal is an anaerobic liquid which cures to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. Used for all types of hydraulic connections, threaded couplings and adaptors. Quick disconnect parts, compression fittings and vibration proofing parts.

THREAD SEALANT WITH TEFLONPIPE SEAL - WHITES72

Instant Low pressure sealant. Seals against oils, chemicals, gases, steam etc. Sealant used for fine and coarse threads up to 50mm in diameter. Long curing rate allows re-alignment of elbows and joints.

7

RTV SILICONE (DYNATEX RANGE)

DYNA BLUE RTVSILICONE GASKET MAKER

Sensor safe, low odour, non-corrosive sealant manufactured to meet OEM specifications. Will not leak and remains flexible. Resists oil, water, anti-freeze, grease and transmission fluid. Temperature resistant up to 500°F (260°C). Use to replace gaskets on valve covers, oil pans, transmission pans, rear-end housings, water pumps and timing chain covers.

DYNA BLACK RTV SILICONE GASKET MAKER

Excellent oil resistance, guaranteed not to leak. Leak proof in the presence of oil, water and anti-freeze. Sensor safe and manufactured to meet OEM specifications. Makes instant gaskets for all engines. Temperature resistant up to 625°F (329°C). Use on valve covers, oil pans, transmission pans, timing covers and intake manifold end seals.

DYNA COPPER RTV SILICONE GASKET MAKER: HIGH TEMP

Advanced formula instant gasketing material designed for late model vehicles with elevated operating temperatures. Low odour, sensor safe; non-corrosive and manufactured to exceed OEM specifications. Highly flexible and will not leak. Temperature resistant up to 700°F (371°C). Use on valve covers, transmission pans, exhaust manifolds/headers, oil pans, thermostat housing and water pumps.

RED RTV SILICONE GASKET MAKER: HIGH TEMPFormulated to withstand higher operating temperatures. Sensor safe and manufactured to meet OEM specifications. Resist cracking and migration caused by thermal cycling. Will not leak. Temperature resistant up to 650°F (343°C). Resist oil, water, anti-freeze and transmission fluid.

CLEAR RTVSILICONE ADHESIVE/SEALANTProvides transparent, watertight silicone rubber seal for a wide range of applications. Bonds and seals metal, plastics, glass, fabric, vinyl, wood and rubber. Use on windshields, sunroofs, tail lights, interior panels, fire walls and dashboards. Cures at room temperature.

DYNA GREY RTVSILICONE GASKET MAKER

Formulated for import cars. Use to replace most gaskets. High temperature, sensor safe, low odour and non-corrosive. Resists water, oil and anti-freeze. Will not leak. Temperature resistant up to 625°F (329°C). Use on valve covers, oil pans, water pumps, transmission pans, thermostat housings, timing covers and intake manifold end seals.

8

RTV SILICONE (DYNATEX RANGE)

RTV SILICONE SEALANT INDUSTRIAL GRADE

General purpose high quality 100% RTV Silicone Sealant. Cures at room temperature to a tough and flexible rubber. For caulking, sealing, waterproofing and bonding. Seals and bonds terminals, connectors, mounting fixtures, mechanical gaskets, glass, metal, masonry, plastic, tile, rubber, wood & fabric. Part numbers 49280, 49281, and 49285 are manufactured to meet USDA approval.

Product Available Sizes Product Description Colour Tak Free Time Full Cure Time Tensile

Strength Temp Range Agency Approvals

Dyna Black 108g & 312g

High Temperature Gasket Maker Black 16-20 minutes 24 Hours 210 psi-65°C to 329°C

ASTM D2240 ASTM D 412 ASTM D 746

Red RTV 108g & 312g

High Temperature Gasket Maker Red 16-20 minutes 24 Hours 350 psi-35°C to 343°C


Dyna Copper 108g & 312g

High Temperature Gasket Maker Copper 16-20 minutes 24 Hours 210 psi-65°C to 371°C


Dyna Grey 108g & 312g

High Temperature Gasket Maker Grey 16-20 minutes 24 Hours 210 psi-65°C to 329°C


Clear RTV 108g Watertight Silicone Rubber Seal Clear 10-20 minutes 24 Hours 350 psi-35°C to 268°C


Industrial Grade 312g General Purpose Black 10-20 minutes 24 Hours 350 psi-62°C to 250°C

ASTM D2240 ASTM D 412 ASTM D 746FDA Status & USDA Status

Marine Grade 312g Marine Grade Sealant White 10-20 minutes 24 Hours 350 psi-30°C to 268°C


Black & Copper RTV 200g Paste like one part, easy bag in can Silicone

Black & Copper

10-20 minutes 24 Hours N/A-35°C to 260°C


BLACK & COPPER RTV HIGH TEMPERATURE SILICONEEndurasil™ RTV Silicone is one part, easy bag in can applied, paste-like sealant that cures to form a high purity elastomer on exposure to atmospheric moisture. No Primers or Accelerators are needed. When cured, Endurasil resists most chemicals, high temperatures and exhibits excellent mechanical properties in all applications where a non-sag sealant of exceptional longevity is required to bond glass, metals, ceramics, wood stone etc. Endurasil™ eliminates leakage, reduces noise, absorbs vibration, seals and bonds parts into a secure unit.

Where surfaces require only a single sided bond, it is possible to treat the side not requiring adhesion with a release agent or simply apply petroleum jelly or oil. When cured torque up the parts to form a compressive seal. Operating temp -70ºC to +225ºC constant, +300ºC intermittent.

RTV SILICONE SEALANT MARINE GRADE Designed for use in marine applications. Silicone Sealant is used for sealing windshields, doors, windows and wires, around steering cables, depth finder wires, horn assemblies, gauges, marine antenna bases, attaching screws, rail mounts and other locations where hull has been penetrated. Resists shrinkage. Seals and bonds metal, plastic, wood, glass, fibreglass, vinyl and fabric. Cures at room temperature.

9

INSTANT BONDING

HIGH VISCOSITYCA01Bonds most plastics, rubbers, metals, woods, cork, etc. CA01 is High viscosity ethyl based superglue for bonding where gap fill is important, or where the materials are absorbent. CA01 is versatile and will bond most plastics, rubbers and metals. Because of its viscosity CA01 allows additional bonding time prior to cure.Typical applications are ferrite cores, magnets, loud speaker cones, leather trims, metal badges, and electronic components; however will also bond cork, wood, ceramic, plastics etc. Only apply adhesive to one side. Apply pressure firmly for a few seconds until the bond forms. Allow to cure before putting into use.

LOW VISCOSITYCA24Bonds elastomers, plastics, metals inc. electronic applications, etc.CA24 is Modified Ethyl superglue which was specially developed for fast bonding of materials such as EPDM and difficult to bond elastomers. It is low viscosity superglue of 20cps. Speed cure is fast, usually in 2-7 seconds, depending on the type of material being bonded. Applications vary, but mostly elastomer and plastics applications. Due to its rapid cure, CA24 is ideal for fast repetitive on line applications, such as in electronics, plastic components assembly and rubber to metal bonds.

PASTE - NON DRIPGEL SET™44 Bonds leather, woods, metals, rubbers, plastics, etcGel Set™ 44 is a thixotropic Gel or Paste-like superglue. It is a non-drip formulation and will not run on vertical surfaces. It is fast to set on difficult surfaces such as leather, acetic substrates and excellent for wood bonding, metals, rubbers, plastics etc. Where vertical surfaces with large gaps (up to 1mm with activator, 0.2mm with out) are being bonded, Gel Set™ 44 Stays in place. Whena fast cure is needed, our A021 or the faster A113 Activators will help cure the thickness and speed cure the adhesive, however, a reduction in ultimate bond strength will be found.

LOW VISCOSITY SURFACE INSENSITIVESURE SET 60

Bonds neoprene, natural rubbers, metals, copper, etc.Sure Set 60, when compared to other Low Viscosity Cyanoacrylates, outperforms most products for cure speed, final cured strength and simply the wide range of difficult plastics and elastomers it can bond. For example, Nitrile, Neoprene and natural rubbers, plastics such as ABS, soft PVC, Polyacetal, EPT and EVA can be bonded in 1-2 seconds and all the bonds are stronger than the material being bonded. Metals such as Steel, Aluminium, Copper and Brass all bond in under 5 seconds and the bond strengths are superior to other manufacturers low viscosity products. Slower cures of up to 12 seconds are found on Polymethyl Methacrylate (PMMA), Bakelite, Polycarbonate and Viton™ rubber. Polyolefin’s can be treated with special preparations.

HIGH SHOCK AND PEEL RESISTANCESPECTAK™80 BLACK

Bonds rubbers, metals, etc.Spectak™ 80 is a Black modified, tough Cyanoacrylate with higher peel and shock resistance to other grades. Variety of bonding applications including, bonding rubbers and metals, but also acting as a strain relief in tough demanding environments. Spectak™ 80 is designed for use with Activator A113 to cure through gaps and large deposits or drop such as bridging and tacking/strain relief of components.

HYBRID SURFACE INSENSITIVEJET SET™41

Bonds woods, paper cardboard, furniture, etc. Ideal for hobbyists. Jet SetTM 41 is a Hybrid quality Cyanoacrylates which is surface insensitive and bonds to a wide variety of materials including wood, paper, cardboard, leather, fabrics etc. Bond times vary according to the substrates but are generally faster than normal superglues.Typical applications include wood trim on furniture, balsa wood bonding for hobbyists, leather accessories on shoes, fabric bows on shoes and lampshade bonding. Other features include versatile bonding or most elastomers, metals and plastics. On elastomer bonding and some plastics, residues or release agents on surfaces should be removed by solvent wipe.


Viscosity (cP)MaximumGap Fill

Tensile Strength Temp Range Fixture

Time (Secs)Primers

Activators Agency Approvals

CA01 25g High Viscosity Clear 1500 0.12mm 320daN/cm(2) -50°C to 90°C 15A701 A113

MIL-S-A46050C ASTM D-53283

CA24 25g Low Viscosity Clear 20 0.1mm 320daN/cm(2) -60°C to 80°C <7A701 A113


CA41 25g Surface Insensitive Clear 120 0.1mm 20N/mm(2) -60°C to 80°C <10A701 A113


CA44 20g, 300g Surface Insensitive Thrixoptropic paste Clear Thixo Gel 0.25mm 25N/mm(2) -50°C to 120°C <30A701 A113


CA60 25g/50g Low Viscosity Surface Insensitive Clear 20 0.1mm 20-30N/mm(2) -60°C to 90°C <5A701 A113


CA80 25g Rubber Toughened, High Shock & Peel Resistance Black >1000 0.2mm 25N/mm(2) -50°C to 90°C <60A701 A113


10

EPOXY

A fast clear curing, two part epoxy adhesive packed in an easy to use double syringe dispenser containing 25ml of adhesive. The correct ratio of hardener and resin is guaranteed on each application. Epoxy contains a specially formulated epoxide resin/hardener system designed to provide rapid setting and strength development when mixed, unlike araldite it sets hard but workable.

Epoxy is an effective adhesive for wood, metals, ceramic, fibreglass and most plastics. Typical applications include repairs and renovation of metal castings, ceramic tiles, vessels or ornaments, wooden, metal or plastic furniture, stone or concrete paving slabs or copings. Epoxy is particularly useful for securing household fittings to brick, plaster, wooden or plastic surfaces, laminating melamine surface sheet to wood or block board, modelling and test rig manufacture.

Epoxy is an ideal adhesive for most plastics but is not suitable for polythene, polypropylene or plasticised PVC. If in doubt, carry out a small trial with the adhesive before using on a large application.

ADV5 5 MINUTE EPOXY FAST SET GENERAL PURPOSE

WILSTIK™

Aqua Stick is a hand kneadable, speciality Epoxy Putty that mixes in one minute to provide fast, permanent repairs to damp, wet areas and underwater applications. It may be applied underwater, in either fresh or salt water and will bond tenaciously to substrates such as fibreglass, metal, wood, concrete, ceramics, glass etc. The mixed Epoxy turns from an aquamarine colour to “fibreglass white” upon curing and will not yellow upon exposure to UV light. After final cure, Aqua Stick may be drilled, sawed, tapped, filed, sanded and painted. It allows patching in areas where welding is impossible.

EPOXY PUTTYAQUA STICK

Copper Stick is a hand kneadable, copper reinforced Epoxy Putty that mixes in one minute to provide fast, permanent repairs to pipes, tanks and vessels made of copper, brass, bronze and other non-ferrous metals. After proper mixing, Copper Stick moulds like clay to fill in and surround leaks in the most intricate openings and breaks in pipes, elbow joints, sleeves, sink traps, drains, water heaters, water tanks etc. It is ideal for sealing freeze breaks and pin-hole leaks and will seal high pressure hot water lines permanently.

EPOXY PUTTYCOPPER STICKWILSTIK™

Aluminium Stick is a hand kneadable, speciality Epoxy Putty that mixes in one minute to provide fast, permanent repairs to most Aluminium surfaces. It comes in a handy rod form with the curing agent encapsulated in the contrasting colour base material. Its putty-like consistency eliminates drips and runs, providing “no mess” application with no tools required to use. The mixed epoxy turns from a silvery colour to “Alloy” upon curing and will not yellow upon exposure to UV light. After just 45 minutes Wilstik™ is completely cured and can be drilled, sawed, carved, sanded, stained or painted. It allows patching in areas where welding is impossible.

EPOXY PUTTYALUMINIUM STICKWILSTIK™

Fast Plastic Stick is a hand kneadable, speciality Epoxy Putty that mixes in one minute to provide fast, permanent repairs to most plastic surfaces. After 15-20 minutes the Epoxy will harden like metal and start to form a tenacious bond. After just 45 minutes Wilstik™ is completely cured and can be drilled, sawed, carved, sanded, stained or painted.

EPOXY PUTTYFAST PLASTIC STICKWILSTIK™

Steel Stick is a hand kneadable, non rusting, steel reinforced Epoxy Putty that mixes in one minute to provide fast, permanent repairs to items made of ferrous and aluminium metals. It comes in a handy rod form with the curing agent encapsulated in the contrasting colour base material. After 15-20 minutes the Epoxy will harden like metal and start to form a tenacious bond. After just 45 minutes Wilstik™ is completely cured and can be drilled, sawed, carved, sanded, stained or painted.

EPOXY PUTTYSTEEL STICKWILSTIK™

Product Available Sizes Product Description Colour Temp Range Lap Shear Strength Fixture Time Full Cure Time

ADV5 25ml & 50ml 5 Minute Epoxy General Purpose Amber -40°C to 93°C 17N/mm2 5 minutes 8 hours

WILSTIK AQUA 180mm x 20mm Epoxy Putty Aqua 120°C 4.8N/mm2 1 hour 24 hours

WILSTIK COPPER 180mm x 20mm Epoxy Putty Copper 120°C 6.2N/mm2 1 hour 24 hours

WILSTIK ALUMINIUM 180mm x 20mm Epoxy Putty Grey 120°C 4.8N/mm2 1 hour 24 hours

WILSTIK FAST PLASTIC 180mm x 20mm Epoxy Putty Blue 120°C 4.8N/mm2 1 hour 24 hours

WILSTIK STEEL 180mm x 20mm Epoxy Putty Grey 120°C 6.2N/mm2 1 hour 24 hours

EMPOX 25ml Metal Epoxy White Black -50°C to 80°C 6-15 minutes 72 hours

EMPOXHoldtite Australia Empox is a two component metal filled epoxy that cures at room temperature to form an ultra hard thermostat polymer. Empox has a fast cure system, allowing a 4 to 6 minute setting time (At 20°C), and when mixed forms a non-slump repair paste.

Some typical uses of Empox are:

• Re-building threads (can be drilled and tapped);• Repairing worn shafts and keyways;• Filling cracked castings.

METAL EPOXYFAST CURE

11

STRUCTURAL BONDING

Product Available Sizes Product Description Colour Approx Viscosity

(cP)Max Gap

FillTensile

Strength Cure Time Temp Range Fixture Time Primers Activators

ST3295 25ml & 50ml 2 Part Toughened Acylic Pink Green

3500 to -500CPS 0.1mm 16-35NmFull Cure 24 Hours

-40°C to +180°C

2-7 minutes Isopropyl Alcohol

M5020 25ml, 50ml & 400ml

Methacrylate Yellow Clear

120000 - 150000 CPS

4.5mm 16-30N/mm2Full Cure 24 Hours

-40°C to +120°C


M5020B 25ml Methacrylate Black120000 -

150000 CPS4.5mm 16-30N/mm2

Full Cure 24 Hours

-40°C to +120°C


5030 50ml & 400ml Methacrylate Yellow Clear

136000 - 168000 CPS

5mm 16-30N/mm2Full Cure 24 Hours

-40°C to +120°C


M5060 400ml Slow Set Methacrylate Yellow Clear

136000 -168000 CPS

5mm 16-30N/mm2Full Cure 24 Hours

-40°C to +120°C


Methacrylate is a two part A&B component system, which is fast setting when mixed via a static mix nozzle at room temperatures. Because it is a high viscosity non-sag material, the mixed material is ideal for all types of gap filling requirements on steel, aluminium, polycarbonates and general plastics. It is also very good on vertical surface bond. Methacrylate exhibits excellent structural strength even without priming the surfaces. Because of its macro structure the bonds formed show excellent durability high peel strength even in big gaps and excellent solvent and environmental resistance, resisting fuels, lubricants cleaning chemicals and fluids.

TYPICAL USAGES OF METHACRYLATEStructural joining of metals, plastics, composite bonding and on ceramics where high impact strengths are needed. Applications include wind turbine, vehicle roofs, fibreglass, sports goods, automotive spoilers, vents, housings.

HANDLING STRENGTHM5020 7-10 minM5060 60-80 min

TYPICAL CURED PROPERTIES Tensile Strength : Average 3500 psiHardness: approx. 75shoreAverage shrinkage: < 5%ASTM D1002 Lap shearsOn steel/steel: 4150 (Psi)On aluminium as received: 3500 (Psi)On polycarbonates: 2500 (Psi)On nylon: 200 (Psi)Impact Strength: > 20 KJ/M2

M5020 / M5060METHACRYLATE

RUBBER TOUGHENED ACRYLICHIGH SHEAR & TEMPERATURE RESISTANCEST3295

ST3295 is a second generation acrylic adhesive designed to combine the high shear and temperature resistance of a conventional acrylic with the qualities of a rubber toughened adhesive where high Peel and Impact Strength are a feature.

ST3295 bonds to a wide variety of materials such as Metals, Glass, Epoxy, Unsaturated Polyesters, GRP, Bakelite etc, ST3295 is supplied in our EMR (Equal Mix Ratio) system syringe or cartridge and is produced in various other forms of packaging.ST3295 can be applied from bottles 1:1 ratio and the cure time can be adjusted by variation of the ratio (3.2 max) without affecting the bond strengths after full cure. ST3295 is suitable for paint bake cycling to +180°C for typical coatings etc. Normal Acrylic operating limits recommended for continuous temperature exposure is -50°C to +130°C.

STRUCTURAL

MethasettinBecauis idepolycsurfaceven the boin bigresist

12

POLYURETHANE

ALPHASEAL 133Similar to Alphaseal 132 but with a Shore A hardness of 55. Mainly used for bonding and sealing glass, ceramics, concrete, wood, aluminium, polyester and most lacquered metals.

Typical applications include: Panel bonding in vehicles. Sealing and bonding panels for refrigeration rooms and trailers. Bonding and sealing air conditioning and ventilation units. Sealing shipping containers. Bonding and sealing concrete panels. Available in black, white or grey and paintable when cured.

Product Available Sizes Product Description Colour Elongation Max

Gap FillShore

Hardness Service Temp Cure Time

DP2246 310ml Fast Curing Structural & Marine Black White Grey >600% 2-10mm 40-45 -30°C to 90°C 3mm per 24 hours

128 310ml Windscreen/direct, glass/sealant Neutral Cure Black >700% 2-10mm >55 -30°C to 90°C >3.5mm per 24 hours

132 310ml Structural & Marine Black White Grey >400% 2-10mm 50 -30°C to 90°C 4mm per 24 hours

133 310ml Structural & Marine Black White Grey >300% 2-10mm 55 -30°C to 90°C 4mm per 24 hours

ALPHA DP2246Fast curing one part general purpose Polyurethane adhesive and sealant with a cured Shore A hardness of 40 to 45. Resistant to oil, sea water and extremes of heat and cold with good adhesion to a wide range of substrates.

Typical applications include:

• bolted lap joints, • cover plates, • bedding in railings, • joint sealing between hulls and superstructures, • sealing duct joints and metal seams, • adhesion to light weight metal panels, glass and GRP.

Stays permanently elastic when cured to accept movement caused by expansion, contraction, shocks and vibration.Paintable when cured. Available in black, white and grey.

ALPHASEAL 128Neutral curing Direct Glazing Polyurethane, which is also widely used for windscreen replacement in the automotive and transport aftermarket. When cured, the Alphaseal 128 forms a flexible adhesive with high tensile strength and a Shore A hardnesswhen cured of 55. Used in conjunction with T163 degreaser and Primer 2. Supplied in 310mm cartridges in black. Drive away time is between 4 and 6 hours.

ALPHASEAL 132High Quality Polyurethane adhesive and sealant with a Shore A hardness of 50. Suitable for use on a wide range of substrates to include metals, glass, wood, GRP, anodised Aluminium, polyester and concrete. Available in black or white. Paintable when cured.

Typical applications include joint sealing, gap filling and bonding in:

• boat and ship building - decks, floors, panels; • transport industry - car body assembly, buses,

containers, horse boxes;• Construction and building;• Metal construction – bonding and mounting of vibrating parts.

13

SILVER GRADE GRAPHITE ANTISEIZEPOWERCAN 200g & BRUSH TOP DIP CAN 500g

Aluminium Antiseize is a general-purpose smooth, silvery coloured, active lubricant, and anti-corrosion compound.

• Protects against rust and corrosion• Protects up to 980ºC• Prevents seizing and galving of metals• Protects against harsh and corrosive environments

Years of protection are afforded to suitability coated parts resisting temperature extremes, harsh and corrosive environments enabling “ease” of disassembly in unexpectedly difficult applications.

NICKEL GRAPHITE ANTISEIZE NUCLEAR GRADE THREAD PROTECTIONPOWERCAN 200g & BRUSH TOP DIP CAN 500g

Nickel Anti-Seize is a highly modified thread and moving part lubricant that resists high temperatures (up to 1315ºC) and prevents corrosion in the parts.

• Lube for treaded parts such as valve seatings• Fork lift chain guard and lube• Rust preventative on any assembly• Boiler hinges and door latches• Prevents seizure on aero jets, turbines etc• Protects threads, gears, pulleys, chains, rollers, cables, hinges,

pivots, sprockets, oven doors, exhaust manifold parts, flues, and assemblies etc.

Nickel Anti-Seize prevents corrosion in adverse conditions such as high and low temperatures and extremes of surrounding conditions such as rain, water jets, salt spray, salt water immersion etc.

COPPER GRAPHITE ANTISEIZE POWERCAN 200g & BRUSH TOP DIP CAN 500g

A high lubricated grease which contains copper particles in a mixture of other fillers and surface activates. The grease is a clean burning leaving no carbon residue. Mostly designed to prevent thread seizure and give high water repellence used also on brake callipers to ease disassembly or prevent “welding” due to excessive temperatures. Other uses include: nuts, bolts, pipe work, keys, keyways, track adjusters, chains, rock, drills, extension rods, anywhere metal to metal contact needs to be avoided due to possible seizure on contact at elevated temperatures.

LUBRICANTS/ANTISEIZE/HANDCLEANERS

DYNATEX HAND CLEANER Dynatex Hand Cleaner is a precisely formulated blend of surfactants, emulsifiers, and skin conditioners. Dynatex balanced mixture provides optimum cleaning potential for your hands without harshness or irritability. Removes grease, stains, paint, tars, printer’s ink, fish odors, etc. Dynatex All Purpose Hand Cleaner with lanolin is a creamy formula that liquefies and gently lifts grease, grime and stains from the hands safely with or without water. Dynatex All Purpose Hand Cleaner leaves hands cleaned and conditioned without the greasy feeling and strong odors of competitive brands. Dynatex All Purpose Hand Cleaner contains lanolin and skin care emollients to aid in healing rough, dry and overused hands.

DYNATEX SUPER SCRUBSIndustrial wipes that clean paint, adhesives, oil and grease from hands, tools and surfaces. 100 big wipes (20cm x 30cm), for use on:

• PAINT - oil and water based. Effective up to 24 hours after application. To assist dry paint removal place wipe on spill to soften paint.

• ADHESIVES & SEALANTS - silicone, acrylic, fillers, poly adhesives, poly foam, epoxy, rubber cement and label residue.

• OIL BASED STAINS - oil, grease, ink and many more.

• GENERAL CLEANING - Ideal for stain and grease removal from most work surfaces. Will refresh and clean old paint and sealants.

Why do you need them?

• Ideal for workshop, office, home or on the move; • No need for lots of cleaners; • No need for soap and water; • One wipe does all.

Product Available Sizes Product Description Colour Approximate Viscosity (cP) Temp Range Agency Approvals

Aluminium Antisieze 200g & 500g Screw Top Brush Can General Purpose Active Lubricant & Anti Corrosion Compound Grey Thick self cling paste -60°C to 980°C MIL-L-907D

Nickel Antiseize 200g & 500g Screw Top Brush Can High Temperature Highly modifoed thread & Moving part lubricant Grey Thick self cling paste -50°C to 1315°C MIL-L-907D

Copper Antiseize 200g & 500g Screw Top Brush Can A High temp lubricating Grease Contains Copper Copper Thick self cling paste -54°C to 982°C MIL-L-907D

Foodsafe 200g Premium Grease for Food Processing enviroments Off White Thick self cling paste -20°C to 120°C FAD Guidence with USDA

epellence tdeta, evo

o ease ding” es. ts, ack

etal to oided

14

POST ASSEMBLY ACTIVATOR ACCELERATOR (200ML)A113

Accelerator is used for the fast curing of Cyanoacrylates, depositing a correct balance of neutralising ions on the surface, stimulating attraction for the adhesive and preparing the surface for bonding.Excellerator© prevents absorption of the lower viscosity superglues into porous items. Excellerator© helps bridge gaps which decreases polymerisation time.

ACTIVATOR PRIMERFOR ANAEROBICS (200ML)A471

Speeds Cure of all Anaerobic fluids and pastes and extends cure through volume. A471 helps fixture time and reduces ultimate cure time. Use when materials are inactive, passive or inert, or where temperature is under 15ºC.

ACTIVATOR FOR ANAEROBICS (50ML)A649

Activator A649 must be used with each of the grades mentioned as it is an essential part B of the cure system of each of the specified products. Apply adhesive to either one or both sides (for faster cure) and adhesive to one side once the Activator has dried and make the bond immediately without allowing movement during fixture time.

PRIMER FOR POLLYOLEFINS / CYANOACRYLATES (50ML)A701

Command Cure Primer is a new surface modifier overcoming the difficulties often experienced with exotic plastics, thermoplastics,elastomers, olefins and silicones. Curing on demand, command cure will overcome the most difficult low energy surfaces. It is simple to apply and can be brushed or sprayed onto clean surfaces.

Applications include:

• Silicone cord, sheet, profiles, moulded parts• Santoprene Cord, sheet, profiles, moulded parts• E.P.D.M Elastomers, Sheet, profiles• Exotic Plastics, suryn, etc• Polyolefins (Teflon’s)• Polypropylen/blends (PP)• Polyethylene/blends (PE)• Polytetrafuoryl Ethylene (acceptable).

Product Available Sizes Product Description Colour Form Evaporation Time

A471 200ml Primer Anaerobic Activator N/A Aerosol 60 Seconds

A649 50ml Structural Activator for Anaerobics N/A Liquid Pump 30-60 Seconds

A701 50ml Primer for Polyfi ns / Cyanoacrylates Clear Liquid Pump <30 seconds

A113 200ml Excellerator for Surface & Speed Cure for Cyanoacrylates Off White/Amber Aerosol <10 Seconds

GASKET REMOVERDynatex Gasket Remover is an aerosol product designed to remove gasket residue from any type of metal or plastic housing. Dynatex Gasket Remover quickly removes baked-on gaskets, silicone weather-strip adhesive, carbon deposits, dried oil, adhesives, grease and paint. Removes gaskets in 10-12 minutes. Prepares metal parts for new gasket installation.

SURFACE PREPARATION

15

The products manufactured at Holdtite, Dynatex and Alpha are produced under a quality system meeting internationally recognised standards. Full traceability is available for each part of the process ensuring total uniformity.

Test methods employed and the equipment used in our materials evaluation and testing laboratory meet relevant standards where necessary. We also employ the services of outside bodies and test centres, utilising the most recent test methods and standards.

Certain Holdtite Australia products also meet special test approval criteria such as USP class IV United States Pharmacopeia, WRC water boards for CA’s and specific pipe sealants for gas approval.

The following table briefly outlines various relevant testing methods for our product range.

STANDARDS, QUALITY & SPECIFICATIONS

ANAEROBICS IN CURED STATE

Test Methods Determination Type of Application

MIL Spec 22473E Strength Achievement Sealing, Locking, Retaining

MIL Spec 46082B Shear Strength Retaining Compounds Type 1, 2 & 3

MIL Spec 46163A Strength Achievement Threadlockers Self Lube / Wicking

DIN Standard 54454 Strength Breaking/Prevailing All Securing Compounds

ISO Standard 10964 Strength Breaking/Prevailing Anaerobics

Pren. 10964 (Draft) Determination Torque Threaded Parts on Fasteners

Din Standard 54452 Shear Static Push Out Securing Compounds

ISO Standard 10123 Shear Static Push Out Securing Compounds

CYANOACRYLATES AND STRUCTURAL BONDING OF CURED PRODUCT

Test Methods Determination Type of Application

MIL Spec A46050C Classification Into Types Cyanoacrylates / Esters Groups

ASTM D1002 Shear Strength (Lapshears) Cyanoacrylates & Structurals

DIN 53283 Shear (Overlapped Parts) Cyanoacrylates & Structurals

DEF Standard 80746/1 Properties Cured Cyanoacrylates

DIN 53288 Tensile Strength Structural Anaerobics / Cyanoacrylates

16

WR

C1

OR

IGIN

AL

STANDARDS, QUALITY & SPECIFICATIONS

17

Q: How do Anaerobics adhesives work?A: The cure mechanism is instigated by two factors: 1. The absence of oxygen

2. The presence of metal ions These two conditions mean that Anaerobics will cure when confi ned within the threads of assembled threaded components or

between close fi tting metal surfaces. The rate/speed at which the adhesive cures can be controlled to suit particular needs, either through the choice of a specifi c Anaerobic product or through the use of an activator. Heat will also speed up the cure time.

Q: Why would I need an Activator?A: When using an Anaerobic on inactive metals (see below), or between metal and non-metallic substrate, an activator can be used

to aid curing. Some Anaerobics however are specifi cally designed for use on an inactive surface such as stainless steel, without the use of an activator. (See technical data sheet on each material).

Active MaterialsIron, Mild Steel, Nickel, Copper, Manganese, Bronze, Commercial Aluminium, Brass

Passive MaterialsPlated Parts, Anodised Aluminium, Titanium, Stainless Steel, Galvanised Steel, Zinc, Pure Aluminium, Cadmium, Magnesium, Magnetite Steel, Natural or Chemical Black Oxide.

Use on plasticsWhen bonding metal to plastic parts, an activator should be used. However, some Anaerobics will stress crack plastics so it is advisable to test before use or seek advice from our sales staff.

Q: Why are the bottles not full?A: To prevent the Anaerobic adhesive from curing in the bottle, the bottle must contain a similar volume of air. Therefore 50ml of

anaerobic will be fi lled into a 100ml bottle, giving it the appearance of being half full.

Q: What do I use to remove an Anaerobic?A: Anaerobics can generally be removed by heat or organic solvents. However chlorinated solvents are the most widely used.

Q: How do I disassemble bonded parts?A: Certain Anaerobic products are designed with the intention of disassembly, allowing conventional hand tools can be used.

Whereas more permanent strength Anaerobics require the use of heat is to aid disassembly.

Q: Do the colours used in Anaerobics mean anything?A: Yes. As Anaerobics can permanently lock a joint, it is important that the right anaerobic is chosen for a particular job, so colours

are traditionally used to aid identifi cation on the shop fl oor. Red indicates high strength (e.g. Studlock) Blue for medium strength (Nutlock), and Purple is used for low strength bonds (Screwlock). Orange is used to identify a removable product (Gasket Maker). Other colours are used to indicate a different function such as Green for Retainers. Some Retainers reach “Ultimate Strength” which is the highest strength band achievable with an Anaerobic.

Q: What happens if Anaerobic gets inside my fl uid system? Will it cure?A: Usually Anaerobics are designed with the ability to be fl ushed from a system without clogging valves or pathways. This is supported by the partially miscible towards many fl uids that Anaerobics posses.

Q: Are the Anaerobics stable within different engineering systems?A: The 900 series are created to be used particularly within the engineering sector. This means they are often designed to be

resistant to a wide range of gases, fl uids and environments.

Q: Are Anaerobics toxic or harmful in use?A: Generally Anaerobics are not toxic. However, they do contain acids which can cause skin sensitivity in some instances. The

Holdtite 900 series has been formulated with far lower acid levels to minimise this problem. Certain Anaerobics (see Holdtite 900 Series) are approved by THE WATER RESEARCH COUNCIL WRAS>NSF for use on potable drinking water, and can therefore be used in applications near food. (Basically when an anaerobic has solidifi ed it is an inert plastic and does not impart taste or smell).

Q: Where can I get further information about these products?A: Our Sales staff are highly trained and extremely well experienced, and over the years has come across all manner of different

problems and scenarios. Please contact the sales department for answers to other more specifi c questions that do not appear on this sheet.

Q: Are they fl ammable?A: No, as the products do not contain any solvent, in addition to the physical composition of the products, they are not regarded

as fl ammable.

Q: What is the shelf life?A: The self life is normally 12/24 months unless stated otherwise.

Q: How should they be stored?A: In cool conditions out of direct sunlight.

Q: What is the typical application of an anaerobic adhesive?A: The applications of Anaerobic vary a great deal, the general use of which consists of the assembly and securing of metallic

components.

Q: Where can I buy Holdtite Australia Adhesives anaerobic range?A: You can visit our website for information on the location and contact details of our distributors. Alternatively you can contact our

sales team on 1300 552 680 to discuss or place an order.

ANAEROBICS FAQ’S

18

COMPARISON CHART

HOLDTITE GRADE OTHER PRODUCT REFERENCE AVAILABLE SIZES DESCRIPTION

THREADLOCKING

T22 3222 / 222 / 7222 10ml, 50ml, 250ml SCREWLOK Low strength for easy disassemblyT43 3243 / 243 / 7243 10ml, 50ml, 250ml NUTLOK Medium strength (oil tolerant)T62 3262 / 262 / 7262 2ml, 10ml, 50ml, 250ml STUDLOK Medium strength, lubricated for torque assemblyT72 3272 / 272 / 7272 10ml, 50ml, 250ml STUDLOK High strength, high temperature rated up to 232°CT77 3277 / 277 / 7277 10ml, 50ml, 250ml STUDLOK High strength for bolts 25mm and aboveT90 3290 / 290 / 7290 10ml, 50ml, 250ml PENETRATOR Wicking grade for close fitting parts

RETAINERS

R41 3541 / 641 / 7641 10ml, 50ml, 250ml BEARING FIT Medium strength allowing disassembly R69 609 10ml, 50ml, 250ml RETAINER Mild strength, low viscosityR60 3660 / 660 / 7660 50ml, 250ml METAL FILL To repair and fill worn cylindrical partsR62 3620 / 620 / 7620 10ml, 50ml, 250ml RETAINER High temperature rated up to 232°CR68 3680 / 680 / 7680 10ml, 50ml, 250ml RETAINER High strength for dynamic loading

GASKETING

G51 XS10 / 510 / 7510 50ml, 250ml DURAFORM High temperature up to 200°CG55 XS15 / 515 50ml, 250ml DESIGNER GASKET Form in place, low viscosityG58 XS18 / 518 / 7518 6ml, 50ml, 250ml DURAFORM SPECIAL GASKET Form in place, high viscosityGHYB-100 Hylomar 100ml HYPERSEAL BLUE Automotive, non-hardening gasket

THREADSEALING

S57 XS67 / 567 / 7567 6ml, 50ml, 250ml PIPESEAL WITH TEFLON 24 hour cure timeS69 3569 / 569 / 7569 50ml, 250ml SPECIAL HYDRAULIC High strength seal on fine threadsS72 18-10 / 572 50ml, 250ml PIPESEAL WITH TEFLON Long cure time allowing realignmentS77 XS77 / 577 / 7577 / 58-11 50ml, 250ml GASTITE PIPESEAL Water, oil, gas AGA certificate no:6900

INSTANT BONDING

CA01 416 25g CA01 SUPERGLUE Plastic, rubber, leather, wood etcCA24 424 25g CA24 SUPERGLUE Elastomers, plastics, fast cure 1-7 secondsCA41 CA401 / 401 25g JET SET 41 Wood, paper, leather, fabrics, rubberCA44 CA454 / 454 20g, 300g GEL SET 44 Thick non-drip formulaCA60 CA406 / 406 25g SURE SET 60 Most plastics, steel aluminum, 1-5 secondsCA80 CA408 / 480 / 2241 25g SPECTAK 80 Black, high peel and shock resistant

STRUCTURALS

ST3295 / M3295 LT3295 25ml TOUGHENED ACRYLIC Pink and GreenM5020 / M5020B NA 25ml, 50ml, 400ml METHACRYLATE Fast cure, Opaque and BlackM5060 NA 400ml METHACRYLATE Medium and slow cure

EPOXY

ADV5 NA 25ml, 50ml 5 MINUTE EPOXYEMPOX Metal Epoxy 25ml METAL EPOXYWILSTIK Kneadable NA 180mm L x 20mm D EPOXY PUTTY Copper, Steel, Aluminium, Aqua and Plastic

SILICONS RTV GASKET MAKER (DYNATEX RANGE)

Dyna Copper RTV Copper Maxx 108g, 300g Advanced formula instant gasket, Sensor Safe Temp to 371°CRed RTV High Temp Red 108g, 312g Resists oil, anti-freeze, Transmission fluid Sensor Safe Temp to 343°CDyna Black RTV Black Maxx 108g, 312g Excellent oil resistance OEM spec Sensor Safe Temp to 329°CDyna Grey RTV Grey Maxx 108g, 300g For imported cars, Sensor Safe OEM spec Temp to 329°C

POLYURETHANES

128 255 310ml Black, Windscreen / Direct Glazing / Sealant Neutral Cure132 291 310ml Black, White, Structural and MarineDP2246 221,11FC 310ml Grey, Black, White, Structural and Marine133 252 310ml Grey, Black, White, Structural and Marine

SURFACE PREPARATION

A471 7471 (T) / 9190 200ml Activator / Primer for anaerobicsA649 7649 50ml Activator / Accelerator for anaerobicsA701 7701 / 770 / 9050 50ml Primers for polyolefin’s / cyanoacrylatesA113 7113 200ml Post assembly activator / AcceleratorGasket Remover 790 369g Gasket Remover

LUBRICANTS

Power Can / Brush top NA 200g Aluminium, Nickel, CopperAA 500g 767 500g Screw Top/Brush Silver Grade Graphite AntiseizeNA 500g 771 500g Screw Top/Brush Nickel Graphite AntiseizeCA 500g C5A 500g Screw Top/Brush Copper Graphite Antiseize

18

Holdtite Australia does not guarantee the availability of any products advertised in this Brochure. Holdtite Australia is not responsible for results obtained in the use of the products by any person whose methods are beyond its control. It is your responsibility to determine the suitability of any of the products and methods of use or preparation in this Brochure. It is also your responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property

in the handling and use of any Holdtite Australia products. In no event shall Holdtite Australia be liable to you or any third party under law for any loss or damage (including but not limited to direct, indirect, economic and consequential damage) in respect of any matter whatsoever related to any information in this Brochure. Phone 1300 552 680 www.holdtiteaustralia.com.au

Holdtite’s sponsored record-breaking Superstock Pontiac

Bonding Solutions

Mechanic

packs now

available!

16419 holdtite brochure revised lb brochure march 2010.pdft77 10ml, 50ml & 250ml high strength,...

Documents