Connector·209KJ COMTECH Co., Ltd 136-1, Sosabon-3dong, Sosa-gu, Bucheon-si, Gyunggi-do, KoreaTel. 82-32-347-8015,6,8(Ext.223), Fax. 82-32-347-8017, www.kjct.co.kr 10.2006

1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN

KJ COMTECH Co., Ltd 136-1, Sosabon-3dong, Sosa-gu, Bucheon-si, Gyunggi-do, KoreaTel. 82-32-347-8015,6,8(Ext.223), Fax. 82-32-347-8017, www.kjct.co.kr 10.2006208·Connector

1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN

Microminiature Coaxial Connector

Plug (Male) Jack (Female)

1.6/5.6 DIN connectors are push on and push onthreaded connectors are named after their outerdiameter of the inner condutor and inner diameterof the outer conductor.The major advantage of this connector is that the plugand socket could be mounted on panels and plugged together.

Microminiature Coaxial ConnectorTechnical DataMaterial DataCable ConnectorPCB ConnectorAdaptor within-Series

208209209210212212

Material Data

Plug (Male)

Max.Min. Max.Min.

Jack (Female)

ABCDEFG

-

6.60/0.260

8.10/0.319

7.00/0.276

0.90/0.035

0.25/0.010

6.70/0.264

3.80/0.150

6.69/0.263

8.25/0.325

7.50/0.295

1.10/0.043

-

-

0.97/0.038

4.00/0.157

-

3.90/0.154

5.40/0.213

-

-

1.03/0.041

-

-

4.30/0.169

5.50/0.217

-

-

PININSULATOR

BODIESJACK

COUPLING NUT

WASHER

Connector PartMaterial

Male FemalePlating

BrassPTFEBrass

-Brass

--

Beryllium-CopperPTFEBrass

Beryllium-Copper-

BrassBrass

Gold-

Gold & NickelGold

NickelNickelNickel

Technical Data

Description

Interface Dimensions

Interface Dimensions in mm/inch

Contents Requirement Specification

Impedance Frequency range Dielectric withstanding voltage (at sea level) Working voltage (at sea level) Insulation resistance Contact resistance - Center contacts - Outer contacts

75ΩDC .......... 1GHz1.5 KV rms, 50 Hz≤ 300 V rms, 50 Hz≥ 500 MΩ

≤ 4 mΩ≤ 2.0 mΩ

Engagement forceDisengagement force Durability (matings)

≥ 12 N / 2.76 lbs ≥ 2.2 N / 0.5 lbs ≥ 500

ELECTRICAL DATA TEST REQUIREMENTS

MECHANICAL DATA TEST REQUIREMENTS

1.6/

5.6

DIN

⑮

Connector·211KJ COMTECH Co., Ltd 136-1, Sosabon-3dong, Sosa-gu, Bucheon-si, Gyunggi-do, KoreaTel. 82-32-347-8015,6,8(Ext.223), Fax. 82-32-347-8017, www.kjct.co.kr 10.2006

KJ COMTECH Co., Ltd 136-1, Sosabon-3dong, Sosa-gu, Bucheon-si, Gyunggi-do, KoreaTel. 82-32-347-8015,6,8(Ext.223), Fax. 82-32-347-8017, www.kjct.co.kr 10.2006210·Connector

Cable Connector

For flexible cableScrew-On TypeCable entry crimpCentre Contact Soldered

For flexible cableScrew-On TypeCable entry crimpCentre Contact Soldered

RG179

fig.1

BT3002

fig.2

SYV-75-3-2

fig.3

SYV-75-3-2

fig.2

RG179

fig.1

RG59

fig.3

For flexible cableScrew-On + Slide-On TypePCB SolderedCable entry crimp

RG179

fig.1

5C-2V

fig.5

RG59

fig.4

For flexible cableScrew-On + Slide-On TypeCable entry crimpCentre Contact Soldered

RG179

fig.1

BT3002

fig.2

L910-39

fig.3

RG59

fig.5

SYV-75-3-2

fig.4

RG179

BT3002

1.6/5.6DIN75-PC-179

1.6/5.6DIN75-PC-BT-3002

1.6/5.6DIN75-PC-SYV-75-3-2

1.6/5.6DIN75-PC-59

1.6/5.6DIN75-PC-5C-2V

Fig

1

TypeCode

Old Code New CodeCable Goup(example) Pin Body Coupling

AS-In Note

NickelNickelGold

2 NickelNickelGold

SYV-75-3-23 NickelNickelGold

RG594 NickelNickelGold

5C-2V

X04

X22

X21

X09

X105 NickelNickelGold

Plating

K318-073-000

K318-074-000 CN3911X04-001-1/1

CN3911X22-001-1/1

CN3911X21-001-1/1

CN3911X09-001-1/1

CN3911X10-001-1/1

K318-075-000

K318-084-000

K318-083-000

RG179

BT3002

1.6/5.6DIN75-BJ-C-179

1.6/5.6DIN75-BJ-C-BT3002

1.6/5.6DIN75-BJ-C-L910-39

1.6/5.6DIN75-BJ-C-SYV-75-3-2

1.6/5.6DIN75-BJ-C-59

Fig

1

TypeCode

Old Code New CodeCable Goup(example) Pin Body

AS-In Note

GoldGold

2 GoldGold

L910-393 NickelGold

SYV-75-3-24 GoldGold

RG59

X04

X22

X05

X21

X095 GoldGold

Plating

K318-357-000

K318-351-000 CN3922X04-001-1/1

CN3922X22-001-1/1

CN3922X05-001-1/1

CN3922X21-001-1/1

CN3922X09-001-1/1

K318-355-000

K318-356-000

K318-352-000

X04 RG1791.6/5.6DIN75-LJ-4R-C-179

Fig

1

TypeCode

Old Code New CodeCable Goup(example) Pin Body

AS-In Note

GoldGold

Plating

K318-353-000 CN3953X04-001-1/1RG179

SYV-75-3-2

1.6/5.6DIN75-LPC-179

1.6/5.6DIN75-LPC-SYV-75-3-2

1.6/5.6DIN75-LPC-59

Fig

1

TypeCode

Old Code New CodeCable Goup(example) Pin Body Coupling

AS-In Note

NickelNickelGold

2 NickelNickelGold

RG59

X04

X21

X093 NickelNickelGold

Plating

K318-123-000

K318-124-000 CN3931X04-001-1/1

CN3931X21-001-1/1

CN3931X09-001-1/1K318-125-000

Straight Cable Plug(male)Straight Cable Plug(male)

Right Angle Cable Plug (male)

Straight Bulkhead Cable Jacks (female)

Right Angle Cable Jacks (female)

1.6/

5.6

DIN

⑮

1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN

KJ COMTECH Co., Ltd 136-1, Sosabon-3dong, Sosa-gu, Bucheon-si, Gyunggi-do, KoreaTel. 82-32-347-8015,6,8(Ext.223), Fax. 82-32-347-8017, www.kjct.co.kr 10.2006212·Connector Connector·213KJ COMTECH Co., Ltd 136-1, Sosabon-3dong, Sosa-gu, Bucheon-si, Gyunggi-do, Korea

Tel. 82-32-347-8015,6,8(Ext.223), Fax. 82-32-347-8017, www.kjct.co.kr 10.2006

Straight PCB Jack(female)

fig.1

Right Angle PCB Jacks (female)

fig.2

Right Angle PCB Jacks (female) Shink Sleeve Ferrule Contact Body

fig.3

ML35

ML8

ML9

1.6/5.6DIN75-J-4R-R

1.6/5.6DIN75-LJ-4R-R

1.6/5.6DIN75-LBJ-4R-R

K318-566-000 CN3951000-001-1/1

CN3953000-001-1/1

CN3954000-001-1/1

K318-666-000

Fig

1

2

3

TypeCode

Old Code New Code Pin BodyAS-InMounting

HoleNote

GoldGold

GoldGold

K318-666-002 GoldGold

Plating

Straight AdaptorPlug to Plug (male)

fig.1

Bulkhead mountedJack to Jack (female)

fig.2

Plug to Jack (male + female)

fig.3

U-Link

fig.4

-

-

-

1.6/5.6DIN75-A-PP

1.6/5.6DIN75-BA-JJ

1.6/5.6DIN75-A-JP

1.6/5.6DIN75-U/LINK P-P

K318-792-000 AD3911-001-1/1

AD3922-001-1/1

AD3913-001-1/1

AD3961-001-1/1

K318-795-000

Fig

1

2

3

TypeCode

Old Code New Code Pin Body CouplingAS-InMounting

HoleNote

NickelGold

GoldGold

K318-794-000 GoldGold

-4 K318-790-000 Nickel

Nickel

-

Nickel

NickelGold

Plating

PCB Connector

Adaptor within-Series

·K318-074·K318-084

1. Cut the cable as much as required. Step 1.

Step 2.

Step 3.

Step 4.

Step 5.

2. Insert the ferrule and the heat shrink sleeve intothe cable and strip off the outer seath.

3. Strip off the out conductor and the center con-ductor as shown in the diagram.

4. After preparing the center conductor, insert thecenter contact into the center conductor andsolder.

5. After inserting the center contact and thedielectric core of the cable into the body to bewrapped with the above portion of the body asshown in the diagram, push the ferrule to theabove of the outer conductor and crimp with thecrimp tool.

6. Push the shrink sleeve to the above the ferrulefinished crimp and contract by heating.

Step 6.

MOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTIONMOUNTING INSTRUCTION

STANDARD CRIMP

CONNECTORS

1.6/

5.6

DIN

⑮

1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN1.6/5.6 DIN